blob: aaf6469ac61f419f918690057b2f9e03ce0d76d7 [file] [log] [blame]
[ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x4b7 with crng_init=0
[ 0.000000] Linux version 4.13.3-1-ARCH (builduser@tobias) (gcc version 7.2.0 (GCC)) #1 SMP PREEMPT Thu Sep 21 20:33:16 CEST 2017
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/Volume-root rw cryptdevice=UUID=0f68e92d-5267-482b-bd37-ae06742b805c:lvm nouveau.noaccel=1 resume=/dev/mapper/Volume-swap acpi_backlight=native
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfd15fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfd16000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO *INVALID*/*INVALID*, BIOS CBET4000 4.6-1713-g687b023d97-dirty 10/06/2017
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000FFC00000 mask FFFFFFC00000 write-protect
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000021f000000 aka 8688M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xbfd16 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f0660-0x000f066f] mapped at [ffff8d2e400f0660]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff8d2e40099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x1f6d5e000, 0x1f6d5efff] PGTABLE
[ 0.000000] BRK [0x1f6d5f000, 0x1f6d5ffff] PGTABLE
[ 0.000000] BRK [0x1f6d60000, 0x1f6d60fff] PGTABLE
[ 0.000000] BRK [0x1f6d61000, 0x1f6d61fff] PGTABLE
[ 0.000000] BRK [0x1f6d62000, 0x1f6d62fff] PGTABLE
[ 0.000000] BRK [0x1f6d63000, 0x1f6d63fff] PGTABLE
[ 0.000000] BRK [0x1f6d64000, 0x1f6d64fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x362f3000-0x37170fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F08B0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000BFD2B0E0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000BFD2D760 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000BFD2B280 0024DB (v02 AMD COREBOOT 00010001 INTL 20161222)
[ 0.000000] ACPI: FACS 0x00000000BFD2B240 000040
[ 0.000000] ACPI: FACS 0x00000000BFD2B240 000040
[ 0.000000] ACPI: SSDT 0x00000000BFD2D860 00008A (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: TCPA 0x00000000BFD2D8F0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x00000000BFD2D930 000072 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: VFCT 0x00000000BFD2D9B0 00F269 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x00000000BFD3CC20 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HEST 0x00000000BFD3CC60 0001D0 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: IVRS 0x00000000BFD3CE30 000070 (v02 AMD AMDIOMMU 00000001 AMD 00000000)
[ 0.000000] ACPI: SSDT 0x00000000BFD3CEA0 001ED4 (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: SSDT 0x00000000BFD3ED80 0009F8 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x21effb000-0x21effffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000021effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bfd15fff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000021effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
[ 0.000000] On node 0 totalpages: 1961140
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12213 pages used for memmap
[ 0.000000] DMA32 zone: 781590 pages, LIFO batch:31
[ 0.000000] Normal zone: 18368 pages used for memmap
[ 0.000000] Normal zone: 1175552 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x818
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfd16000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffff8d305ec00000 s106520 r8192 d32744 u524288
[ 0.000000] pcpu-alloc: s106520 r8192 d32744 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1930474
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/Volume-root rw cryptdevice=UUID=0f68e92d-5267-482b-bd37-ae06742b805c:lvm nouveau.noaccel=1 resume=/dev/mapper/Volume-swap acpi_backlight=native
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7626412K/7844560K available (6603K kernel code, 1126K rwdata, 2036K rodata, 1328K init, 900K bss, 218148K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 28108 entries in 110 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 8448, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2495.461 MHz processor
[ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 4992.87 BogoMIPS (lpj=8318203)
[ 0.003333] pid_max: default: 32768 minimum: 301
[ 0.003333] ACPI: Core revision 20170531
[ 0.006755] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.006786] Security Framework initialized
[ 0.006788] Yama: becoming mindful.
[ 0.009208] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.010434] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010485] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.010526] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.010765] CPU: Physical Processor ID: 0
[ 0.010766] CPU: Processor Core ID: 0
[ 0.010768] mce: CPU supports 7 MCE banks
[ 0.010781] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.010782] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.012147] Freeing SMP alternatives memory: 24K
[ 0.013438] smpboot: Max logical packages: 1
[ 0.020347] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056666] smpboot: CPU0: AMD A10-5750M APU with Radeon(tm) HD Graphics (family: 0x15, model: 0x13, stepping: 0x1)
[ 0.066690] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.066699] ... version: 0
[ 0.066700] ... bit width: 48
[ 0.066701] ... generic registers: 6
[ 0.066702] ... value mask: 0000ffffffffffff
[ 0.066702] ... max period: 00007fffffffffff
[ 0.066703] ... fixed-purpose events: 0
[ 0.066704] ... event mask: 000000000000003f
[ 0.073349] Hierarchical SRCU implementation.
[ 0.086761] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.093349] smp: Bringing up secondary CPUs ...
[ 0.120039] x86: Booting SMP configuration:
[ 0.120042] .... node #0, CPUs: #1 #2 #3
[ 0.425359] smp: Brought up 1 node, 4 CPUs
[ 0.425359] smpboot: Total of 4 processors activated (19970.52 BogoMIPS)
[ 0.426681] devtmpfs: initialized
[ 0.426733] x86/mm: Memory block size: 128MB
[ 0.427659] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.427659] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.427659] pinctrl core: initialized pinctrl subsystem
[ 0.427659] RTC time: 10:35:19, date: 10/09/17
[ 0.427659] NET: Registered protocol family 16
[ 0.427659] cpuidle: using governor ladder
[ 0.427659] cpuidle: using governor menu
[ 0.427659] PCCT header not found.
[ 0.427659] ACPI: bus type PCI registered
[ 0.427659] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.427659] PCI: Using configuration type 1 for base access
[ 0.427659] PCI: Using configuration type 1 for extended access
[ 0.427659] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.427659] mtrr: probably your BIOS does not setup all CPUs.
[ 0.427659] mtrr: corrected configuration.
[ 0.430047] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.430047] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.430049] ACPI: Added _OSI(Module Device)
[ 0.430050] ACPI: Added _OSI(Processor Device)
[ 0.430051] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.430052] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.430220] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.517306] ACPI: EC: EC started
[ 0.517308] ACPI: EC: interrupt blocked
[ 0.517652] ACPI: \_SB_.PCI0.LIBR.EC0_: Used as first EC
[ 0.517654] ACPI: \_SB_.PCI0.LIBR.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.517656] ACPI: \_SB_.PCI0.LIBR.EC0_: Used as boot DSDT EC to handle transactions
[ 0.517657] ACPI: Interpreter enabled
[ 0.517681] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.517683] ACPI: Using IOAPIC for interrupt routing
[ 0.517701] HEST: Table parsing has been initialized.
[ 0.517703] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.521459] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.521464] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.521541] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.521587] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7 window]; [io 0x03b0-0x03df window] ignored
[ 0.521776] PCI host bridge to bus 0000:00
[ 0.521779] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.521780] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.521782] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.521784] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.521785] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[ 0.521787] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.521796] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[ 0.521901] pci 0000:00:00.2: [1022:1419] type 00 class 0x080600
[ 0.522010] pci 0000:00:01.0: [1002:990b] type 00 class 0x030000
[ 0.522023] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[ 0.522028] pci 0000:00:01.0: reg 0x14: [io 0x2000-0x20ff]
[ 0.522033] pci 0000:00:01.0: reg 0x18: [mem 0xf0280000-0xf02bffff]
[ 0.522071] pci 0000:00:01.0: supports D1 D2
[ 0.522146] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[ 0.522158] pci 0000:00:01.1: reg 0x10: [mem 0xf02c0000-0xf02c3fff]
[ 0.522201] pci 0000:00:01.1: supports D1 D2
[ 0.522283] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
[ 0.522328] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.522415] pci 0000:00:05.0: [1022:1415] type 01 class 0x060400
[ 0.522460] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.522567] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.522593] pci 0000:00:10.0: reg 0x10: [mem 0xf02c8000-0xf02c9fff 64bit]
[ 0.522687] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.522791] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.522808] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417]
[ 0.522816] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423]
[ 0.522824] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f]
[ 0.522832] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427]
[ 0.522839] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f]
[ 0.522847] pci 0000:00:11.0: reg 0x24: [mem 0xf02cc000-0xf02cc7ff]
[ 0.522950] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.522966] pci 0000:00:12.0: reg 0x10: [mem 0xf02ca000-0xf02cafff]
[ 0.523096] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.523114] pci 0000:00:12.2: reg 0x10: [mem 0xf02cd000-0xf02cd0ff]
[ 0.523182] pci 0000:00:12.2: supports D1 D2
[ 0.523183] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.523270] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.523285] pci 0000:00:13.0: reg 0x10: [mem 0xf02cb000-0xf02cbfff]
[ 0.523428] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.523446] pci 0000:00:13.2: reg 0x10: [mem 0xf02ce000-0xf02ce0ff]
[ 0.523513] pci 0000:00:13.2: supports D1 D2
[ 0.523515] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.523604] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.523740] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.523761] pci 0000:00:14.2: reg 0x10: [mem 0xf02c4000-0xf02c7fff 64bit]
[ 0.523817] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.523898] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.524032] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.524146] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[ 0.524231] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[ 0.524315] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[ 0.524394] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[ 0.524481] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[ 0.524561] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[ 0.524704] pci 0000:01:00.0: [1969:10a0] type 00 class 0x020000
[ 0.524734] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf003ffff 64bit]
[ 0.524743] pci 0000:01:00.0: reg 0x18: [io 0x1000-0x107f]
[ 0.524832] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.536705] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.536711] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
[ 0.536714] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff]
[ 0.536796] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
[ 0.536823] pci 0000:02:00.0: reg 0x10: [mem 0xf0100000-0xf017ffff 64bit]
[ 0.536860] pci 0000:02:00.0: reg 0x30: [mem 0xf0180000-0xf018ffff pref]
[ 0.536925] pci 0000:02:00.0: supports D1 D2
[ 0.536926] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.546703] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.546710] pci 0000:00:05.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.546813] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[ 0.546821] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.546823] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.546825] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.546826] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.546828] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
[ 0.547377] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.547434] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.547489] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.547543] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.547596] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.547649] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0
[ 0.547700] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.547754] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.547845] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.547932] ACPI: EC: interrupt unblocked
[ 0.547937] ACPI: EC: event unblocked
[ 0.547945] ACPI: \_SB_.PCI0.LIBR.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.547947] ACPI: \_SB_.PCI0.LIBR.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.550039] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[ 0.550039] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.550039] pci 0000:00:01.0: vgaarb: bridge control possible
[ 0.550039] vgaarb: loaded
[ 0.550101] EDAC MC: Ver: 3.0.0
[ 0.550180] PCI: Using ACPI for IRQ routing
[ 0.550180] PCI: pci_cache_line_size set to 64 bytes
[ 0.550180] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.550180] e820: reserve RAM buffer [mem 0xbfd16000-0xbfffffff]
[ 0.550180] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[ 0.550180] NetLabel: Initializing
[ 0.550180] NetLabel: domain hash size = 128
[ 0.550180] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.550192] NetLabel: unlabeled traffic allowed by default
[ 0.550240] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.550240] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.553342] clocksource: Switched to clocksource hpet
[ 0.567000] VFS: Disk quotas dquot_6.6.0
[ 0.567029] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.567139] pnp: PnP ACPI init
[ 0.567327] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
[ 0.567332] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.567365] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.567412] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.567443] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.573620] pnp: PnP ACPI: found 4 devices
[ 0.580743] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.580773] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.580776] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
[ 0.580780] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff]
[ 0.580784] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.580787] pci 0000:00:05.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.580792] pci 0000:00:14.4: PCI bridge to [bus 03]
[ 0.580803] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.580805] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.580806] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.580808] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.580809] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffffffff]
[ 0.580811] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.580812] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf00fffff]
[ 0.580814] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.580816] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 0.580817] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 0.580819] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.580820] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.580822] pci_bus 0000:03: resource 8 [mem 0xe0000000-0xffffffff]
[ 0.580888] NET: Registered protocol family 2
[ 0.581087] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.581261] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.581515] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.581572] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.581613] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.581697] NET: Registered protocol family 1
[ 0.581719] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.582397] pci 0000:00:12.2: PME# does not work under D3, disabling it
[ 0.582787] pci 0000:00:13.2: PME# does not work under D3, disabling it
[ 0.582815] pci 0000:01:00.0: set MSI_INTX_DISABLE_BUG flag
[ 0.582821] PCI: CLS 64 bytes, default 64
[ 0.582871] Unpacking initramfs...
[ 0.878828] Freeing initrd memory: 14840K
[ 0.878850] AMD-Vi: Applying erratum 746 workaround for IOMMU at 0000:00:00.2
[ 0.879020] pci 0000:00:00.2: can't derive routing for PCI INT A
[ 0.879022] pci 0000:00:00.2: PCI INT A: no GSI
[ 0.879171] iommu: Adding device 0000:00:01.0 to group 0
[ 0.879188] iommu: Adding device 0000:00:01.1 to group 0
[ 0.879253] iommu: Adding device 0000:00:04.0 to group 1
[ 0.879319] iommu: Adding device 0000:00:05.0 to group 2
[ 0.879394] iommu: Adding device 0000:00:10.0 to group 3
[ 0.879459] iommu: Adding device 0000:00:11.0 to group 4
[ 0.879538] iommu: Adding device 0000:00:12.0 to group 5
[ 0.879554] iommu: Adding device 0000:00:12.2 to group 5
[ 0.879632] iommu: Adding device 0000:00:13.0 to group 6
[ 0.879652] iommu: Adding device 0000:00:13.2 to group 6
[ 0.879736] iommu: Adding device 0000:00:14.0 to group 7
[ 0.879753] iommu: Adding device 0000:00:14.2 to group 7
[ 0.879769] iommu: Adding device 0000:00:14.3 to group 7
[ 0.879836] iommu: Adding device 0000:00:14.4 to group 8
[ 0.879936] iommu: Adding device 0000:00:18.0 to group 9
[ 0.879953] iommu: Adding device 0000:00:18.1 to group 9
[ 0.879971] iommu: Adding device 0000:00:18.2 to group 9
[ 0.879989] iommu: Adding device 0000:00:18.3 to group 9
[ 0.880052] iommu: Adding device 0000:00:18.4 to group 9
[ 0.880070] iommu: Adding device 0000:00:18.5 to group 9
[ 0.880082] iommu: Adding device 0000:01:00.0 to group 1
[ 0.880094] iommu: Adding device 0000:02:00.0 to group 2
[ 0.880602] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.880603] AMD-Vi: Extended features (0x800000853):
[ 0.880604] PreF PPR GT IA
[ 0.880607] AMD-Vi: Interrupt remapping enabled
[ 0.880797] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.883089] amd_uncore: AMD NB counters detected
[ 0.883287] LVT offset 0 assigned for vector 0x400
[ 0.883355] perf: AMD IBS detected (0x000000ff)
[ 0.883410] Scanning for low memory corruption every 60 seconds
[ 0.884050] Initialise system trusted keyrings
[ 0.884061] Key type blacklist registered
[ 0.884199] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.885733] zbud: loaded
[ 0.886652] Key type asymmetric registered
[ 0.886700] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.886744] io scheduler noop registered
[ 0.886745] io scheduler deadline registered
[ 0.886774] io scheduler cfq registered (default)
[ 0.886775] io scheduler mq-deadline registered
[ 0.886776] io scheduler kyber registered
[ 0.886807] io scheduler bfq registered
[ 0.887337] pcieport 0000:00:04.0: Signaling PME with IRQ 25
[ 0.887352] pcieport 0000:00:05.0: Signaling PME with IRQ 26
[ 0.887376] vesafb: mode is 1366x768x32, linelength=5632, pages=0
[ 0.887377] vesafb: scrolling: redraw
[ 0.887379] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.887389] vesafb: framebuffer at 0xe0000000, mapped to 0xffffb55b81800000, using 4224k, total 4224k
[ 0.901017] Console: switching to colour frame buffer device 170x48
[ 0.914384] fb0: VESA VGA frame buffer device
[ 0.914867] GHES: Failed to enable APEI firmware first mode.
[ 0.915016] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.915543] Linux agpgart interface v0.103
[ 0.915912] rtc_cmos 00:01: RTC can wake from S4
[ 0.916058] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.916082] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
[ 0.916155] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.916184] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[ 0.916440] NET: Registered protocol family 10
[ 0.920808] Segment Routing with IPv6
[ 0.920836] NET: Registered protocol family 17
[ 0.921104] RAS: Correctable Errors collector initialized.
[ 0.921144] microcode: CPU0: patch_level=0x00000000
[ 0.921149] microcode: CPU1: patch_level=0x00000000
[ 0.921160] microcode: CPU2: patch_level=0x00000000
[ 0.921171] microcode: CPU3: patch_level=0x00000000
[ 0.921233] microcode: Microcode Update Driver: v2.2.
[ 0.921245] sched_clock: Marking stable (921227151, 0)->(1054378332, -133151181)
[ 0.921514] registered taskstats version 1
[ 0.921521] Loading compiled-in X.509 certificates
[ 0.921538] zswap: loaded using pool lzo/zbud
[ 0.921847] Magic number: 5:788:577
[ 0.921956] rtc_cmos 00:01: setting system clock to 2017-10-09 10:35:20 UTC (1507545320)
[ 0.922791] PM: Checking hibernation image partition /dev/mapper/Volume-swap
[ 0.922796] PM: Hibernation image not present or could not be loaded.
[ 0.924782] Freeing unused kernel memory: 1328K
[ 0.924783] Write protecting the kernel read-only data: 10240k
[ 0.925513] Freeing unused kernel memory: 1576K
[ 0.925630] Freeing unused kernel memory: 12K
[ 0.950336] ACPI: bus type USB registered
[ 0.950363] usbcore: registered new interface driver usbfs
[ 0.950373] usbcore: registered new interface driver hub
[ 0.950411] usbcore: registered new device driver usb
[ 0.952070] QUIRK: Enable AMD PLL fix
[ 0.952088] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 0.952097] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 1.890010] tsc: Refined TSC clocksource calibration: 2495.462 MHz
[ 1.890026] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f87b1d5dc, max_idle_ns: 440795321587 ns
[ 2.903526] clocksource: Switched to clocksource tsc
[ 22.569194] xhci_hcd 0000:00:10.0: can't setup: -110
[ 22.569300] xhci_hcd 0000:00:10.0: USB bus 1 deregistered
[ 22.569416] xhci_hcd 0000:00:10.0: init 0000:00:10.0 fail, -110
[ 22.569535] xhci_hcd: probe of 0000:00:10.0 failed with error -110
[ 22.571314] SCSI subsystem initialized
[ 22.572978] libata version 3.00 loaded.
[ 22.573939] ahci 0000:00:11.0: version 3.0
[ 22.574194] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 22.574197] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pio
[ 22.574888] scsi host0: ahci
[ 22.575111] scsi host1: ahci
[ 22.575229] scsi host2: ahci
[ 22.575342] scsi host3: ahci
[ 22.576708] scsi host4: ahci
[ 22.576976] scsi host5: ahci
[ 22.577070] ata1: SATA max UDMA/133 abar m2048@0xf02cc000 port 0xf02cc100 irq 19
[ 22.577073] ata2: SATA max UDMA/133 abar m2048@0xf02cc000 port 0xf02cc180 irq 19
[ 22.577074] ata3: DUMMY
[ 22.577075] ata4: DUMMY
[ 22.577075] ata5: DUMMY
[ 22.577076] ata6: DUMMY
[ 22.891476] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 22.891509] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 22.893288] ata2.00: ATAPI: TSSTcorp CDDVDW SU-208DB, L101, max UDMA/100
[ 22.896227] ata2.00: configured for UDMA/100
[ 22.897916] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR20002, max UDMA/100
[ 22.897919] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 22.904338] ata1.00: configured for UDMA/100
[ 22.904616] scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0002 PQ: 0 ANSI: 5
[ 22.940903] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SU-208DB L101 PQ: 0 ANSI: 5
[ 22.942078] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 22.942081] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 22.942100] sd 0:0:0:0: [sda] Write Protect is off
[ 22.942102] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.942148] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.973953] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 22.973956] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 22.974191] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 23.305312] sda: sda1 sda2 sda3
[ 23.305923] sd 0:0:0:0: [sda] Attached SCSI disk
[ 23.359788] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 23.369604] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 23.380265] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 23.380267] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 23.398386] ehci-pci: EHCI PCI platform driver
[ 23.398628] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 23.398638] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 23.398645] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 23.398654] ehci-pci 0000:00:12.2: debug port 1
[ 23.398709] ehci-pci 0000:00:12.2: irq 17, io mem 0xf02cd000
[ 23.399630] AVX version of gcm_enc/dec engaged.
[ 23.399632] AES CTR mode by8 optimization enabled
[ 23.400154] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 23.400209] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 23.410043] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 23.410323] hub 1-0:1.0: USB hub found
[ 23.410342] hub 1-0:1.0: 5 ports detected
[ 23.410785] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 23.410793] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 23.410798] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 23.410807] ehci-pci 0000:00:13.2: debug port 1
[ 23.410847] ehci-pci 0000:00:13.2: irq 17, io mem 0xf02ce000
[ 23.423436] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 23.423696] hub 2-0:1.0: USB hub found
[ 23.423707] hub 2-0:1.0: 5 ports detected
[ 23.424404] ohci-pci: OHCI PCI platform driver
[ 23.424621] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 23.424629] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 23.424663] ohci-pci 0000:00:12.0: irq 18, io mem 0xf02ca000
[ 23.459660] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 23.484416] hub 3-0:1.0: USB hub found
[ 23.484428] hub 3-0:1.0: 5 ports detected
[ 23.484799] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 23.484805] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 23.484832] ohci-pci 0000:00:13.0: irq 18, io mem 0xf02cb000
[ 23.544413] hub 4-0:1.0: USB hub found
[ 23.544424] hub 4-0:1.0: 5 ports detected
[ 23.604261] device-mapper: uevent: version 1.0.3
[ 23.604362] device-mapper: ioctl: 4.36.0-ioctl (2017-06-09) initialised: dm-devel@redhat.com
[ 23.730101] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 23.746760] usb 2-2: new high-speed USB device number 2 using ehci-pci
[ 23.867701] hub 1-1:1.0: USB hub found
[ 23.867795] hub 1-1:1.0: 4 ports detected
[ 23.890318] usbcore: registered new interface driver rtsx_usb
[ 24.253434] usb 3-3: new full-speed USB device number 2 using ohci-pci
[ 24.826768] usb 1-1.1: new high-speed USB device number 4 using ehci-pci
[ 24.926116] hub 1-1.1:1.0: USB hub found
[ 24.926423] hub 1-1.1:1.0: 4 ports detected
[ 25.006768] usb 1-1.3: new low-speed USB device number 5 using ehci-pci
[ 25.112475] hidraw: raw HID events driver (C) Jiri Kosina
[ 25.117058] usbcore: registered new interface driver usbhid
[ 25.117060] usbhid: USB HID core driver
[ 25.206767] usb 1-1.1.3: new full-speed USB device number 6 using ehci-pci
[ 26.961340] random: crng init done
[ 30.137445] NET: Registered protocol family 38
[ 30.711939] PM: Starting manual resume from disk
[ 30.711943] PM: Hibernation image partition 254:1 present
[ 30.711944] PM: Looking for hibernation image.
[ 30.712191] PM: Image not found (code -22)
[ 30.712191] PM: Hibernation image not present or could not be loaded.
[ 31.009435] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 32.333701] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 32.415299] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 32.415481] systemd[1]: Detected architecture x86-64.
[ 32.464927] systemd[1]: Set hostname to <isabella>.
[ 33.478090] systemd[1]: Listening on Journal Socket (/dev/log).
[ 33.478451] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 33.478697] systemd[1]: Listening on udev Control Socket.
[ 33.497206] systemd[1]: Listening on Process Core Dump Socket.
[ 33.561333] systemd[1]: Reached target Remote File Systems.
[ 33.561600] systemd[1]: Listening on Network Service Netlink Socket.
[ 33.561790] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 33.932859] loop: module loaded
[ 33.988692] EXT4-fs (dm-2): re-mounted. Opts: data=ordered
[ 34.073204] usbip_core: USB/IP Core v1.0.0
[ 34.142210] systemd-journald[297]: Received request to flush runtime journal from PID 1
[ 34.298075] usbcore: registered new device driver usbip-host
[ 34.298079] usbip_host: USB/IP Host Driver v1.0.0
[ 34.576975] vboxdrv: loading out-of-tree module taints kernel.
[ 34.580839] vboxdrv: Found 4 processor cores
[ 34.600335] vboxdrv: TSC mode is Invariant, tentative frequency 2495467259 Hz
[ 34.600337] vboxdrv: Successfully loaded version 5.1.28 (interface 0x002a0000)
[ 34.650798] VBoxPciLinuxInit
[ 34.707067] vboxpci: IOMMU found
[ 34.748355] VBoxNetAdp: Successfully started.
[ 34.845643] VBoxNetFlt: Successfully started.
[ 38.044958] acpi_cpufreq: overriding BIOS provided _PSD data
[ 38.248614] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 38.250110] ACPI: AC Adapter [AC] (off-line)
[ 38.264640] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 38.264685] ACPI: Lid Switch [LID]
[ 38.264740] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 38.264751] ACPI: Power Button [PWRB]
[ 38.264817] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 38.264830] ACPI: Power Button [PWRF]
[ 38.553603] ACPI: Battery Slot [BATX] (battery present)
[ 38.720053] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 38.720058] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
[ 38.720254] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 38.778880] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 39.001153] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 39.001283] sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x780b, Revision ID: 0x16
[ 39.001289] sp5100_tco: I/O address 0x0cd6 already in use
[ 40.326009] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f03)
[ 40.369204] psmouse serio1: elantech: Synaptics capabilities query result 0x78, 0x17, 0x0b.
[ 40.412130] psmouse serio1: elantech: Elan sample query result 04, 5c, 85
[ 40.637142] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
[ 40.894809] kvm: Nested Virtualization enabled
[ 40.894812] kvm: Nested Paging enabled
[ 40.955198] MCE: In-kernel MCE decoding enabled.
[ 41.298733] EDAC amd64: Node 0: DRAM ECC disabled.
[ 41.298736] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 41.348127] EDAC amd64: Node 0: DRAM ECC disabled.
[ 41.348131] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 41.352530] Bluetooth: Core ver 2.22
[ 41.352561] NET: Registered protocol family 31
[ 41.352563] Bluetooth: HCI device and connection manager initialized
[ 41.352569] Bluetooth: HCI socket layer initialized
[ 41.352573] Bluetooth: L2CAP socket layer initialized
[ 41.352583] Bluetooth: SCO socket layer initialized
[ 41.410248] ath: phy0: WB335 2-ANT card detected
[ 41.410252] ath: phy0: Set BT/WLAN RX diversity capability
[ 41.416573] ath: phy0: Enable LNA combining
[ 41.417642] ath: EEPROM regdomain: 0x65
[ 41.417643] ath: EEPROM indicates we should expect a direct regpair map
[ 41.417647] ath: Country alpha2 being used: 00
[ 41.417649] ath: Regpair used: 0x65
[ 41.420710] input: Logitech USB Trackball as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C408.0001/input/input7
[ 41.420836] hid-generic 0003:046D:C408.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:12.2-1.3/input0
[ 41.421194] input: Matias Ergo Pro Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0/0003:1111:1111.0002/input/input8
[ 41.477315] hid-generic 0003:1111:1111.0002: input,hidraw1: USB HID v1.00 Keyboard [Matias Ergo Pro Keyboard] on usb-0000:00:12.2-1.1.3/input0
[ 41.477686] input: Matias Ergo Pro Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.1/0003:1111:1111.0003/input/input9
[ 41.533756] hid-generic 0003:1111:1111.0003: input,hidraw2: USB HID v1.00 Device [Matias Ergo Pro Keyboard] on usb-0000:00:12.2-1.1.3/input1
[ 41.749711] alx 0000:01:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [20:1a:06:97:b7:e0]
[ 41.810620] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 41.811662] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffb55b81480000, irq=17
[ 42.109386] mousedev: PS/2 mouse device common for all mice
[ 42.163275] usbcore: registered new interface driver btusb
[ 42.766419] usb 3-3: USB disconnect, device number 2
[ 42.767529] usbcore: registered new interface driver ath3k
[ 42.800451] alx 0000:01:00.0 enp1s0: renamed from eth0
[ 42.867971] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[ 43.290097] usb 3-3: new full-speed USB device number 3 using ohci-pci
[ 43.638234] [drm] radeon kernel modesetting enabled.
[ 44.152223] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 44.404712] CRAT table not found
[ 44.404716] Finished initializing topology ret=0
[ 44.404750] kfd kfd: Initialized module
[ 44.405269] checking generic (e0000000 420000) vs hw (e0000000 10000000)
[ 44.405273] fb: switching to radeondrmfb from VESA VGA
[ 44.405327] Console: switching to colour dummy device 80x25
[ 44.406093] [drm] initializing kernel modesetting (ARUBA 0x1002:0x990B 0x1002:0x990B 0x00).
[ 44.406150] ATOM BIOS: 113
[ 44.406218] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 44.406222] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 44.406229] [drm] Detected VRAM RAM=512M, BAR=256M
[ 44.406231] [drm] RAM width 64bits DDR
[ 44.406351] [TTM] Zone kernel: Available graphics memory: 3855072 kiB
[ 44.406353] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 44.406355] [TTM] Initializing pool allocator
[ 44.406364] [TTM] Initializing DMA pool allocator
[ 44.406403] [drm] radeon: 512M of VRAM memory ready
[ 44.406405] [drm] radeon: 1024M of GTT memory ready.
[ 44.406419] [drm] Loading ARUBA Microcode
[ 44.613979] [drm] Internal thermal controller without fan control
[ 44.614248] [drm] radeon: dpm initialized
[ 44.674452] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
[ 44.674501] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 44.713062] [drm] PCIE GART of 1024M enabled (table at 0x00000000001D6000).
[ 44.713237] radeon 0000:00:01.0: WB enabled
[ 44.713242] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8d305276bc00
[ 44.713674] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffb55b81e35a18
[ 44.733877] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0xffff8d305276bc18
[ 44.733882] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0xffff8d305276bc1c
[ 44.733885] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff8d305276bc04
[ 44.733888] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff8d305276bc08
[ 44.733891] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8d305276bc0c
[ 44.733894] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff8d305276bc10
[ 44.733900] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 44.733901] [drm] Driver supports precise vblank timestamp query.
[ 44.733904] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[ 44.733968] radeon 0000:00:01.0: radeon: using MSI.
[ 44.733997] [drm] radeon: irq initialized.
[ 44.752634] [drm] ring test on 0 succeeded in 2 usecs
[ 44.752642] [drm] ring test on 3 succeeded in 3 usecs
[ 44.752649] [drm] ring test on 4 succeeded in 3 usecs
[ 44.798712] [drm] ring test on 5 succeeded in 2 usecs
[ 44.818730] [drm] UVD initialized successfully.
[ 44.928810] [drm] ring test on 6 succeeded in 17 usecs
[ 44.928821] [drm] ring test on 7 succeeded in 4 usecs
[ 44.928822] [drm] VCE initialized successfully.
[ 44.929037] [drm] ib test on ring 0 succeeded in 0 usecs
[ 44.929069] [drm] ib test on ring 3 succeeded in 0 usecs
[ 44.929118] [drm] ib test on ring 4 succeeded in 0 usecs
[ 45.437089] [drm] ib test on ring 5 succeeded
[ 45.970147] [drm] ib test on ring 6 succeeded
[ 46.476835] [drm] ib test on ring 7 succeeded
[ 46.482174] [drm] radeon atom DIG backlight initialized
[ 46.482177] [drm] Radeon Display Connectors
[ 46.482178] [drm] Connector 0:
[ 46.482179] [drm] eDP-1
[ 46.482181] [drm] HPD1
[ 46.482183] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 46.482184] [drm] Encoders:
[ 46.482186] [drm] LCD1: INTERNAL_UNIPHY2
[ 46.482187] [drm] Connector 1:
[ 46.482188] [drm] VGA-1
[ 46.482189] [drm] HPD2
[ 46.482191] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 46.482192] [drm] Encoders:
[ 46.482193] [drm] CRT1: INTERNAL_UNIPHY2
[ 46.482194] [drm] CRT1: NUTMEG
[ 46.482195] [drm] Connector 2:
[ 46.482196] [drm] HDMI-A-1
[ 46.482197] [drm] HPD3
[ 46.482199] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[ 46.482200] [drm] Encoders:
[ 46.482201] [drm] DFP1: INTERNAL_UNIPHY
[ 47.446640] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 47.745961] [drm] fb mappable at 0xE03DA000
[ 47.745965] [drm] vram apper at 0xE0000000
[ 47.745967] [drm] size 4325376
[ 47.745968] [drm] fb depth is 24
[ 47.745970] [drm] pitch is 5632
[ 47.746118] fbcon: radeondrmfb (fb0) is primary device
[ 48.537153] wlp2s0: authenticate with c4:6e:1f:a6:b0:81
[ 48.556001] wlp2s0: send auth to c4:6e:1f:a6:b0:81 (try 1/3)
[ 48.558623] wlp2s0: authenticated
[ 48.560046] wlp2s0: associate with c4:6e:1f:a6:b0:81 (try 1/3)
[ 48.563831] wlp2s0: RX AssocResp from c4:6e:1f:a6:b0:81 (capab=0x431 status=0 aid=4)
[ 48.563952] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 48.564120] wlp2s0: associated
[ 48.616681] usb 3-3: device descriptor read/64, error -110
[ 49.900278] Console: switching to colour frame buffer device 170x48
[ 49.905303] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 49.930220] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[ 49.930543] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 50.245218] snd_hda_codec_conexant hdaudioC1D0: CX20757: BIOS auto-probing.
[ 50.245602] snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20757: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 50.245606] snd_hda_codec_conexant hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 50.245610] snd_hda_codec_conexant hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 50.245612] snd_hda_codec_conexant hdaudioC1D0: mono: mono_out=0x0
[ 50.245614] snd_hda_codec_conexant hdaudioC1D0: inputs:
[ 50.245617] snd_hda_codec_conexant hdaudioC1D0: Mic=0x19
[ 50.245620] snd_hda_codec_conexant hdaudioC1D0: Internal Mic=0x1a
[ 50.245623] snd_hda_codec_conexant hdaudioC1D0: Line=0x18
[ 50.252649] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 50.252951] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 50.253077] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 50.253205] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[ 50.424027] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input14
[ 50.424179] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input15
[ 50.424283] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/sound/card0/input16
[ 50.424380] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/sound/card0/input17
[ 51.584324] wlp2s0: authenticate with c4:6e:1f:a6:b0:81
[ 51.601160] wlp2s0: send auth to c4:6e:1f:a6:b0:81 (try 1/3)
[ 51.604011] wlp2s0: authenticated
[ 51.606782] wlp2s0: associate with c4:6e:1f:a6:b0:81 (try 1/3)
[ 51.610713] wlp2s0: RX AssocResp from c4:6e:1f:a6:b0:81 (capab=0x431 status=0 aid=4)
[ 51.611340] wlp2s0: associated
[ 92.417831] fuse init (API version 7.26)