[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13)
[    0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64 
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff99fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bff9a000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 11/25/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000F8000000 mask FFFFFC000000 write-combining
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000180000000 aka 6144M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xbff9a max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f0660-0x000f066f] mapped at [ffff8800000f0660]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
[    0.000000]  [mem 0x17fe00000-0x17fffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
[    0.000000]  [mem 0x17c000000-0x17fdfffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
[    0.000000]  [mem 0x100000000-0x17bffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbff99fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0xbfdfffff] page 2M
[    0.000000]  [mem 0xbfe00000-0xbff99fff] page 4k
[    0.000000] RAMDISK: [mem 0x7f24c000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0830 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000BFFAB0E0 00006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000BFFAD8D0 000074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000BFFAB280 002644 (v02 ASUS   COREBOOT 00000001 INTL 20150619)
[    0.000000] ACPI: FACS 0x00000000BFFAB240 000040
[    0.000000] ACPI: SSDT 0x00000000BFFAD9D0 000EEA (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: TCPA 0x00000000BFFAE8C0 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x00000000BFFAE900 0000C6 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000BFFAE9D0 000150 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000BFFAEB20 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000BFFAEB50 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000BFFAEB90 000150 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000BFFAECE0 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
[    0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=2
[    0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
[    0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[    0.000000]   NODE_DATA [mem 0x13fffb000-0x13fffffff]
[    0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
[    0.000000]   NODE_DATA [mem 0x17fff8000-0x17fffcfff]
[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
[    0.000000]  [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x17fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xbff99fff]
[    0.000000]   node   0: [mem 0x100000000-0x13fffffff]
[    0.000000]   node   1: [mem 0x140000000-0x17fffffff]
[    0.000000] On node 0 totalpages: 1048376
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10695 pages used for memmap
[    0.000000]   DMA32 zone: 782234 pages, LIFO batch:31
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] On node 1 totalpages: 262144
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbff9a000-0xcfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
[    0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 
[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1292580
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64 
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xa5ea000000-0xa5ebffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[    0.000000] Memory: 5012208K/5242080K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 229872K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour *CGA 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1909.767 MHz processor
[    0.000157] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.53 BogoMIPS (lpj=7639068)
[    0.010796] pid_max: default: 32768 minimum: 301
[    0.015441] ACPI: Core revision 20140424
[    0.021835] ACPI: All ACPI Tables successfully acquired
[    0.027188] Security Framework initialized
[    0.031314] AppArmor: AppArmor disabled by boot time parameter
[    0.037151] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.044857] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.057951] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.067646] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.074546] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.082396] Initializing cgroup subsys memory
[    0.086770] Initializing cgroup subsys devices
[    0.091231] Initializing cgroup subsys freezer
[    0.095685] Initializing cgroup subsys net_cls
[    0.100142] Initializing cgroup subsys blkio
[    0.104429] Initializing cgroup subsys perf_event
[    0.109139] Initializing cgroup subsys net_prio
[    0.113727] tseg: 0000000000
[    0.113738] CPU: Physical Processor ID: 0
[    0.117757] CPU: Processor Core ID: 0
[    0.121431] mce: CPU supports 6 MCE banks
[    0.125459] LVT offset 0 assigned for vector 0xf9
[    0.130178] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.145516] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
[    0.154528] ftrace: allocating 21614 entries in 85 pages
[    0.169811] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.215333] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
[    0.332520] Performance Events: AMD PMU driver.
[    0.337099] ... version:                0
[    0.341111] ... bit width:              48
[    0.345208] ... generic registers:      4
[    0.349221] ... value mask:             0000ffffffffffff
[    0.354522] ... max period:             00007fffffffffff
[    0.359840] ... fixed-purpose events:   0
[    0.363871] ... event mask:             000000000000000f
[    0.371715] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.379919] x86: Booting SMP configuration:
[    0.384114] .... node  #0, CPUs:      #1 #2 #3
[    0.428495] .... node  #1, CPUs:   #4 #5 #6 #7
[    0.581242] x86: Booted up 2 nodes, 8 CPUs
[    0.585541] smpboot: Total of 8 processors activated (30557.33 BogoMIPS)
[    0.598047] devtmpfs: initialized
[    0.609352] pinctrl core: initialized pinctrl subsystem
[    0.614745] NET: Registered protocol family 16
[    0.619406] cpuidle: using governor ladder
[    0.623507] cpuidle: using governor menu
[    0.627444] node 0 link 1: io port [1000, 3fff]
[    0.627448] TOM: 00000000c0000000 aka 3072M
[    0.631642] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
[    0.631645] node 0 link 1: mmio [fc000000, fc3fffff]
[    0.631649] node 0 link 1: mmio [f8000000, fbffffff]
[    0.631651] TOM2: 0000000180000000 aka 6144M
[    0.635928] bus: [bus 00-05] on node 0 link 1
[    0.635930] bus: 00 [io  0x0000-0xffff]
[    0.635932] bus: 00 [mem 0xd0000000-0xffffffff]
[    0.635934] bus: 00 [mem 0x180000000-0xfcffffffff]
[    0.636043] ACPI: bus type PCI registered
[    0.640063] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.646666] PCI: Using configuration type 1 for base access
[    0.652242] PCI: Using configuration type 1 for extended access
[    0.669333] ACPI: Added _OSI(Module Device)
[    0.673524] ACPI: Added _OSI(Processor Device)
[    0.677974] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.682686] ACPI: Added _OSI(Processor Aggregator Device)
[    0.691650] ACPI: Interpreter enabled
[    0.695331] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.704598] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[    0.713860] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[    0.723125] ACPI: (supports S0 S1 S5)
[    0.726792] ACPI: Using IOAPIC for interrupt routing
[    0.731803] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.760870] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[    0.767059] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.775272] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.816084] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.826105] PCI host bridge to bus 0000:00
[    0.830214] pci_bus 0000:00: root bus resource [bus 00-05]
[    0.835706] pci_bus 0000:00: root bus resource [io  0x0d00-0x3fff]
[    0.841891] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.848769] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[    0.855649] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
[    0.862527] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.868725] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.868935] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[    0.868942] pci 0000:00:01.0: reg 0x10: [io  0x2c00-0x2c7f]
[    0.869070] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.869078] pci 0000:00:01.1: reg 0x10: [io  0x3000-0x301f]
[    0.869104] pci 0000:00:01.1: reg 0x20: [io  0x2c80-0x2cbf]
[    0.869124] pci 0000:00:01.1: reg 0x24: [io  0x2cc0-0x2cff]
[    0.869168] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.869269] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.869277] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
[    0.869328] pci 0000:00:02.0: supports D1 D2
[    0.869338] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.869389] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.875116] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.875131] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
[    0.875172] pci 0000:00:02.1: supports D1 D2
[    0.875174] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.875220] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.880937] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.880972] pci 0000:00:06.0: reg 0x20: [io  0x3020-0x302f]
[    0.881008] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.888147] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.894678] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.901816] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.908464] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.908475] pci 0000:00:07.0: reg 0x10: [io  0x3050-0x3057]
[    0.908480] pci 0000:00:07.0: reg 0x14: [io  0x3070-0x3073]
[    0.908485] pci 0000:00:07.0: reg 0x18: [io  0x3058-0x305f]
[    0.908489] pci 0000:00:07.0: reg 0x1c: [io  0x3074-0x3077]
[    0.908494] pci 0000:00:07.0: reg 0x20: [io  0x3030-0x303f]
[    0.908499] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
[    0.908649] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.908660] pci 0000:00:08.0: reg 0x10: [io  0x3060-0x3067]
[    0.908665] pci 0000:00:08.0: reg 0x14: [io  0x3078-0x307b]
[    0.908669] pci 0000:00:08.0: reg 0x18: [io  0x3068-0x306f]
[    0.908674] pci 0000:00:08.0: reg 0x1c: [io  0x307c-0x307f]
[    0.908678] pci 0000:00:08.0: reg 0x20: [io  0x3040-0x304f]
[    0.908683] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
[    0.908791] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[    0.908856] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.914583] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.914635] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.914683] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.920406] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.920449] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.920495] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.926215] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.926255] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.926324] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.932048] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.932110] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.932187] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.937925] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.938054] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.938160] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.938276] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.938408] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.938523] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[    0.938727] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[    0.938877] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[    0.939061] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[    0.939254] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[    0.939461] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[    0.939486] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.939500] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
[    0.939510] pci 0000:01:04.0: reg 0x18: [io  0x1000-0x107f]
[    0.939555] pci 0000:01:04.0: supports D1 D2
[    0.939662] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.944643] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    0.944646] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.944650] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    0.944758] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[    0.944816] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
[    0.944842] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref]
[    0.944945] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.945044] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.955045] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.960012] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.960103] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[    0.960138] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
[    0.960241] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.960334] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.970334] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.975304] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    0.975383] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.980428] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    0.985411] pci_bus 0000:00: on NUMA node 0
[    0.985509] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    0.991654] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    0.997798] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    1.005099] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    1.012392] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    1.019691] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[    1.026993] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    1.033129] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[    1.039260] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[    1.046563] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    1.053874] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    1.061166] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[    1.067285] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[    1.073442] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[    1.080731] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[    1.088034] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[    1.095347] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.103865] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[    1.110326] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[    1.116786] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[    1.123245] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[    1.130018] ACPI: Enabled 1 GPEs in block 00 to 1F
[    1.135155] vgaarb: setting as boot device: PCI:0000:01:04.0
[    1.140822] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[    1.148917] vgaarb: loaded
[    1.151635] vgaarb: bridge control possible 0000:01:04.0
[    1.157116] PCI: Using ACPI for IRQ routing
[    1.161306] PCI: pci_cache_line_size set to 64 bytes
[    1.161372] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.161376] e820: reserve RAM buffer [mem 0xbff9a000-0xbfffffff]
[    1.161690] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.168739] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    1.173802] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    1.182494] Switched to clocksource hpet
[    1.198219] pnp: PnP ACPI init
[    1.201324] ACPI: bus type PNP registered
[    1.205858] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.205946] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.206027] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.206127] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.206164] pnp 00:04: [dma 2]
[    1.206211] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.206241] pnp: PnP ACPI: found 5 devices
[    1.210354] ACPI: bus type PNP unregistered
[    1.222403] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window
[    1.232353] pci 0000:00:09.0: PCI bridge to [bus 01]
[    1.237329] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    1.243430] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    1.250220] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    1.257457] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
[    1.264680] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.269654] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    1.276450] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    1.281420] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    1.288215] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    1.293188] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.298162] pci_bus 0000:00: resource 4 [io  0x0d00-0x3fff]
[    1.298164] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[    1.298167] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
[    1.298169] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
[    1.298172] pci_bus 0000:00: resource 8 [io  0x0000-0x0cf7]
[    1.298175] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    1.298178] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[    1.298180] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[    1.298183] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
[    1.298186] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
[    1.298337] NET: Registered protocol family 2
[    1.303228] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.310908] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.318245] TCP: Hash tables configured (established 65536 bind 65536)
[    1.324858] TCP: reno registered
[    1.328117] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.334324] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.341132] NET: Registered protocol family 1
[    1.345875] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    1.351959] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.357875] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.363410] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.368927] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    1.374522] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.380070] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.385579] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    1.391167] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.396713] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.402222] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    1.407814] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.413352] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.418863] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    1.424443] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.429970] pci 0000:01:04.0: Video device with shadowed ROM
[    1.429980] PCI: CLS 64 bytes, default 64
[    1.430093] Unpacking initramfs...
[    1.813612] Freeing initrd memory: 14028K (ffff88007f24c000 - ffff88007ffff000)
[    1.821532] PCI-DMA: Disabling AGP.
[    1.825205] PCI-DMA: aperture base @ b4000000 size 65536 KB
[    1.830786] PCI-DMA: using GART IOMMU.
[    1.834546] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.846596] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.854756] microcode: CPU0: patch_level=0x01000084
[    1.859645] microcode: CPU1: patch_level=0x01000084
[    1.864546] microcode: CPU2: patch_level=0x01000084
[    1.869450] microcode: CPU3: patch_level=0x01000084
[    1.874339] microcode: CPU4: patch_level=0x01000084
[    1.879237] microcode: CPU5: patch_level=0x01000084
[    1.884137] microcode: CPU6: patch_level=0x01000084
[    1.889035] microcode: CPU7: patch_level=0x01000084
[    1.894028] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.902826] LVT offset 1 assigned for vector 0x400
[    1.907640] IBS: LVT offset 1 assigned
[    1.911428] perf: AMD IBS detected (0x00000007)
[    1.916593] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.922986] audit: initializing netlink subsys (disabled)
[    1.928418] audit: type=2000 audit(1480068490.664:1): initialized
[    1.935309] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.941712] zbud: loaded
[    1.944609] VFS: Disk quotas dquot_6.5.2
[    1.948574] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.955119] msgmni has been set to 9945
[    1.959479] alg: No test for stdrng (krng)
[    1.963643] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.971138] io scheduler noop registered
[    1.975079] io scheduler deadline registered
[    1.979427] io scheduler cfq registered (default)
[    1.984355] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[    1.984481] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[    1.984592] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[    1.984723] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[    1.984908] aer 0000:00:0b.0:pcie02: service driver aer loaded
[    1.984936] aer 0000:00:0c.0:pcie02: service driver aer loaded
[    1.984962] aer 0000:00:0d.0:pcie02: service driver aer loaded
[    1.984988] aer 0000:00:0e.0:pcie02: service driver aer loaded
[    1.985012] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    1.991982] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.998511] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    1.998521] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    2.005483] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    2.012016] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    2.012026] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[    2.018991] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[    2.019000] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[    2.025965] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[    2.025999] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.031610] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.038309] GHES: HEST is not enabled!
[    2.042254] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.068852] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.096535] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    2.104443] Linux agpgart interface v0.103
[    2.108759] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[    2.119318] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.124368] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.129643] mousedev: PS/2 mouse device common for all mice
[    2.135318] rtc_cmos rtc_cmos: RTC can wake from S4
[    2.140454] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    2.146855] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    2.154721] ledtrig-cpu: registered to indicate activity on CPUs
[    2.160923] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.167368] AMD IOMMUv2 functionality not available on this system
[    2.173698] TCP: cubic registered
[    2.177191] NET: Registered protocol family 10
[    2.182064] mip6: Mobile IPv6
[    2.183664] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.193655] NET: Registered protocol family 17
[    2.198109] mpls_gso: MPLS GSO support
[    2.202717] registered taskstats version 1
[    2.207583] rtc_cmos rtc_cmos: setting system clock to 2016-11-25 10:08:12 UTC (1480068492)
[    2.216006] PM: Hibernation image not present or could not be loaded.
[    2.217793] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[    2.225649] Write protecting the kernel read-only data: 8192k
[    2.234885] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
[    2.243478] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    2.276470] systemd-udevd[98]: starting version 215
[    2.282237] random: systemd-udevd urandom read with 4 bits of entropy available
[    2.311718] SCSI subsystem initialized
[    2.315898] ACPI: bus type USB registered
[    2.320242] usbcore: registered new interface driver usbfs
[    2.325855] usbcore: registered new interface driver hub
[    2.326193] FDC 0 is a post-1991 82077
[    2.335212] pps_core: LinuxPPS API ver. 1 registered
[    2.335690] usbcore: registered new device driver usb
[    2.345258] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.355819] PTP clock support registered
[    2.355854] libata version 3.00 loaded.
[    2.360238] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.367202] pata_amd 0000:00:06.0: version 0.4.1
[    2.367904] scsi0 : pata_amd
[    2.371343] ehci-pci: EHCI PCI platform driver
[    2.371474] scsi1 : pata_amd
[    2.371583] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[    2.371585] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[    2.371604] tg3.c:v3.137 (May 11, 2014)
[    2.371615] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[    2.371826] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[    2.408222] ehci-pci 0000:00:02.1: EHCI Host Controller
[    2.408274] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.419707] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    2.427204] ehci-pci 0000:00:02.1: debug port 1
[    2.431826] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    2.431865] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
[    2.446128] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.451957] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.458761] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.461513] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[    2.461516] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.461518] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.461519] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.461679] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[    2.461821] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[    2.511906] usb usb1: Product: EHCI Host Controller
[    2.516788] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.522885] usb usb1: SerialNumber: 0000:00:02.1
[    2.527796] hub 1-0:1.0: USB hub found
[    2.531575] hub 1-0:1.0: 10 ports detected
[    2.536044] sata_nv 0000:00:07.0: version 3.5
[    2.536334] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[    2.542677] ohci-pci: OHCI PCI platform driver
[    2.543005] scsi2 : sata_nv
[    2.543303] scsi3 : sata_nv
[    2.543435] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[    2.543438] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[    2.543684] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[    2.544199] scsi4 : sata_nv
[    2.544457] scsi5 : sata_nv
[    2.544558] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[    2.544562] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[    2.558903] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[    2.558905] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.558907] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.558909] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.627421] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    2.633030] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.640481] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
[    2.704031] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.710821] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.718044] usb usb2: Product: OHCI PCI host controller
[    2.723277] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.729375] usb usb2: SerialNumber: 0000:00:02.0
[    2.734229] hub 2-0:1.0: USB hub found
[    2.737999] hub 2-0:1.0: 10 ports detected
[    2.845940] tsc: Refined TSC clocksource calibration: 1909.786 MHz
[    2.853937] ata3: SATA link down (SStatus 0 SControl 300)
[    2.853943] ata5: SATA link down (SStatus 0 SControl 300)
[    3.173818] ata4: SATA link down (SStatus 0 SControl 300)
[    3.489707] ata6: SATA link down (SStatus 0 SControl 300)
[    3.515271] FS-Cache: Loaded
[    3.523291] RPC: Registered named UNIX socket transport module.
[    3.530330] RPC: Registered udp transport module.
[    3.536415] RPC: Registered tcp transport module.
[    3.542506] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.556011] FS-Cache: Netfs 'nfs' registered for caching
[    3.573423] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[    3.617788] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    3.849687] Switched to clocksource tsc
[    6.326995] tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
[    6.333614] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[    6.340498] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    6.771806] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    6.785834] systemd[1]: Detected architecture 'x86-64'.
[    6.835363] systemd[1]: Inserted module 'autofs4'
[    6.841580] systemd[1]: Set hostname to <cb-test-tgt>.
[    6.996837] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[    7.009559] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    7.024962] systemd[1]: Expecting device dev-ttyS0.device...
[    7.040656] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    7.048439] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.056048] systemd[1]: Starting Remote File Systems (Pre).
[    7.072592] systemd[1]: Reached target Remote File Systems (Pre).
[    7.078767] systemd[1]: Starting Encrypted Volumes.
[    7.092499] systemd[1]: Reached target Encrypted Volumes.
[    7.097960] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    7.120515] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.129950] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    7.138021] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    7.145953] systemd[1]: Starting Paths.
[    7.160484] systemd[1]: Reached target Paths.
[    7.164875] systemd[1]: Starting Swap.
[    7.176484] systemd[1]: Reached target Swap.
[    7.180779] systemd[1]: Starting Root Slice.
[    7.192486] systemd[1]: Created slice Root Slice.
[    7.197219] systemd[1]: Starting User and Session Slice.
[    7.212469] systemd[1]: Created slice User and Session Slice.
[    7.218239] systemd[1]: Starting Delayed Shutdown Socket.
[    7.232463] systemd[1]: Listening on Delayed Shutdown Socket.
[    7.238230] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    7.256447] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.263426] systemd[1]: Starting Journal Socket (/dev/log).
[    7.280445] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.286398] systemd[1]: Starting udev Kernel Socket.
[    7.300434] systemd[1]: Listening on udev Kernel Socket.
[    7.305782] systemd[1]: Starting udev Control Socket.
[    7.320430] systemd[1]: Listening on udev Control Socket.
[    7.325856] systemd[1]: Starting Journal Socket.
[    7.340420] systemd[1]: Listening on Journal Socket.
[    7.345434] systemd[1]: Starting System Slice.
[    7.360413] systemd[1]: Created slice System Slice.
[    7.365320] systemd[1]: Starting system-getty.slice.
[    7.380406] systemd[1]: Created slice system-getty.slice.
[    7.385838] systemd[1]: Starting system-serial\x2dgetty.slice.
[    7.400406] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    7.406718] systemd[1]: Starting Increase datagram queue length...
[    7.425861] systemd[1]: Starting udev Coldplug all Devices...
[    7.462504] systemd[1]: Starting Load Kernel Modules...
[    7.480658] systemd[1]: Started Set Up Additional Binary Formats.
[    7.486910] systemd[1]: Mounting Debug File System...
[    7.502064] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.525557] systemd[1]: Mounting POSIX Message Queue File System...
[    7.541179] systemd[1]: Mounting Huge Pages File System...
[    7.557192] systemd[1]: Starting Slices.
[    7.568387] systemd[1]: Reached target Slices.
[    7.572912] systemd[1]: Starting Remount Root and Kernel File Systems...
[    7.600408] systemd[1]: Mounted Huge Pages File System.
[    7.616336] systemd[1]: Mounted POSIX Message Queue File System.
[    7.632365] systemd[1]: Mounted Debug File System.
[    7.648358] systemd[1]: Started Increase datagram queue length.
[    7.664338] systemd[1]: Started Load Kernel Modules.
[    7.684477] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    7.708334] systemd[1]: Started Remount Root and Kernel File Systems.
[    7.724373] systemd[1]: Started udev Coldplug all Devices.
[    7.770143] systemd[1]: Started Various fixups to make systemd work better on Debian.
[    7.778035] systemd[1]: Starting Load/Save Random Seed...
[    7.794205] systemd[1]: Starting Create Static Device Nodes in /dev...
[    7.813841] systemd[1]: Starting Apply Kernel Variables...
[    7.830014] systemd[1]: Mounted Configuration File System.
[    7.835613] systemd[1]: Mounted FUSE Control File System.
[    7.841044] systemd[1]: Starting Syslog Socket.
[    7.856325] systemd[1]: Listening on Syslog Socket.
[    7.861290] systemd[1]: Starting Sockets.
[    7.876265] systemd[1]: Reached target Sockets.
[    7.880821] systemd[1]: Starting Journal Service...
[    7.904318] systemd[1]: Started Journal Service.
[    7.979927] systemd-udevd[209]: starting version 215
[    8.078593] systemd-journald[208]: Received request to flush runtime journal from PID 1
[    8.107297] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[    8.115150] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[    8.123855] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.133253] EDAC MC: Ver: 3.0.0
[    8.133463] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    8.133471] ACPI: Power Button [PWRB]
[    8.133621] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    8.133625] ACPI: Power Button [PWRF]
[    8.164053] acpi-cpufreq: overriding BIOS provided _PSD data
[    8.174290] MCE: In-kernel MCE decoding enabled.
[    8.182319] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    8.191658] AMD64 EDAC driver v3.4.0
[    8.192694] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[    8.192730] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[    8.197580] kvm: Nested Virtualization enabled
[    8.197589] kvm: Nested Paging enabled
[    8.215553] EDAC amd64: DRAM ECC enabled.
[    8.219676] EDAC amd64: F10h detected (node 0).
[    8.224285] EDAC MC: DCT0 chip selects:
[    8.224287] EDAC amd64: MC: 0:     0MB 1:     0MB
[    8.229029] EDAC amd64: MC: 2:     0MB 3:     0MB
[    8.233674] EDAC amd64: MC: 4:     0MB 5:     0MB
[    8.238406] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[    8.243135] EDAC MC: DCT1 chip selects:
[    8.243137] EDAC amd64: MC: 0:     0MB 1:     0MB
[    8.247868] EDAC amd64: MC: 2:     0MB 3:     0MB
[    8.252685] EDAC amd64: MC: 4:     0MB 5:     0MB
[    8.257409] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[    8.263486] EDAC amd64: using x4 syndromes.
[    8.269058] EDAC amd64: MCT channel count: 2
[    8.274162] EDAC amd64: CS6: Registered DDR2 RAM
[    8.278916] EDAC amd64: CS7: Registered DDR2 RAM
[    8.283867] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[    8.293606] EDAC amd64: DRAM ECC enabled.
[    8.297697] EDAC amd64: F10h detected (node 1).
[    8.302283] EDAC MC: DCT0 chip selects:
[    8.302287] EDAC amd64: MC: 0:  1024MB 1:     0MB
[    8.308355] EDAC amd64: MC: 2:     0MB 3:     0MB
[    8.314446] EDAC amd64: MC: 4:     0MB 5:     0MB
[    8.320547] EDAC amd64: MC: 6:     0MB 7:     0MB
[    8.326642] EDAC MC: DCT1 chip selects:
[    8.326646] EDAC amd64: MC: 0:     0MB 1:     0MB
[    8.331966] EDAC amd64: MC: 2:     0MB 3:     0MB
[    8.336686] EDAC amd64: MC: 4:     0MB 5:     0MB
[    8.341413] EDAC amd64: MC: 6:     0MB 7:     0MB
[    8.346123] EDAC amd64: using x4 syndromes.
[    8.350313] EDAC amd64: MCT channel count: 1
[    8.354674] EDAC amd64: CS0: Registered DDR2 RAM
[    8.359552] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
[    8.369329] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[    8.471423] random: nonblocking pool is initialized
[   38.628048] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****