blob: 145c22dbebfe6693c36f72ea597608a8e849d3ff [file] [log] [blame]
[ 0.000000] Linux version 5.6.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 9.3.0 (Debian 9.3.0-11)) #1 SMP Debian 5.6.7-1 (2020-04-29)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.6.0-1-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff28fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ff29000-0x00000000829fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047b5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: LENOVO 23532NU/23532NU, BIOS CBET4000 4.12 05/12/2020
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2893.328 MHz processor
[ 0.002036] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.002038] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.002041] last_pfn = 0x47b600 max_arch_pfn = 0x400000000
[ 0.002045] MTRR default type: write-back
[ 0.002046] MTRR fixed ranges enabled:
[ 0.002047] 00000-9FFFF write-back
[ 0.002048] A0000-BFFFF uncachable
[ 0.002049] C0000-FFFFF write-back
[ 0.002049] MTRR variable ranges enabled:
[ 0.002050] 0 base 080000000 mask FC0000000 uncachable
[ 0.002051] 1 base 0C0000000 mask FF0000000 uncachable
[ 0.002052] 2 base 0D0000000 mask FF0000000 write-combining
[ 0.002052] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.002053] 4 disabled
[ 0.002053] 5 disabled
[ 0.002054] 6 disabled
[ 0.002054] 7 disabled
[ 0.002054] 8 disabled
[ 0.002055] 9 disabled
[ 0.002321] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002670] last_pfn = 0x7ff29 max_arch_pfn = 0x400000000
[ 0.012061] BRK [0x35a801000, 0x35a801fff] PGTABLE
[ 0.012062] BRK [0x35a802000, 0x35a802fff] PGTABLE
[ 0.012063] BRK [0x35a803000, 0x35a803fff] PGTABLE
[ 0.012088] BRK [0x35a804000, 0x35a804fff] PGTABLE
[ 0.012089] BRK [0x35a805000, 0x35a805fff] PGTABLE
[ 0.012168] BRK [0x35a806000, 0x35a806fff] PGTABLE
[ 0.012190] BRK [0x35a807000, 0x35a807fff] PGTABLE
[ 0.012370] RAMDISK: [mem 0x305ef000-0x342eefff]
[ 0.012375] ACPI: Early table checksum verification disabled
[ 0.012378] ACPI: RSDP 0x00000000000F67B0 000024 (v02 COREv4)
[ 0.012382] ACPI: XSDT 0x000000007FF4F0E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.012387] ACPI: FACP 0x000000007FF52CC0 000114 (v06 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.012391] ACPI: DSDT 0x000000007FF4F280 003A39 (v02 COREv4 COREBOOT 20110725 INTL 20200110)
[ 0.012394] ACPI: FACS 0x000000007FF4F240 000040
[ 0.012396] ACPI: FACS 0x000000007FF4F240 000040
[ 0.012398] ACPI: SSDT 0x000000007FF52DE0 001AC5 (v02 COREv4 COREBOOT 0000002A CORE 20200110)
[ 0.012401] ACPI: MCFG 0x000000007FF548B0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.012403] ACPI: TCPA 0x000000007FF548F0 000032 (v02 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.012406] ACPI: APIC 0x000000007FF54930 00006C (v03 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.012408] ACPI: DMAR 0x000000007FF549A0 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.012411] ACPI: HPET 0x000000007FF56A70 000038 (v01 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.012418] ACPI: Local APIC address 0xfee00000
[ 0.012490] No NUMA configuration found
[ 0.012491] Faking a node at [mem 0x0000000000000000-0x000000047b5fffff]
[ 0.012494] NODE_DATA(0) allocated [mem 0x47b5ee000-0x47b5f2fff]
[ 0.012522] Zone ranges:
[ 0.012523] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.012524] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.012526] Normal [mem 0x0000000100000000-0x000000047b5fffff]
[ 0.012526] Device empty
[ 0.012527] Movable zone start for each node
[ 0.012528] Early memory node ranges
[ 0.012529] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.012530] node 0: [mem 0x0000000000100000-0x000000007ff28fff]
[ 0.012531] node 0: [mem 0x0000000100000000-0x000000047b5fffff]
[ 0.012706] Zeroed struct page in unavailable ranges: 19257 pages
[ 0.012707] Initmem setup node 0 [mem 0x0000000000001000-0x000000047b5fffff]
[ 0.012709] On node 0 totalpages: 4175047
[ 0.012710] DMA zone: 64 pages used for memmap
[ 0.012711] DMA zone: 21 pages reserved
[ 0.012711] DMA zone: 3998 pages, LIFO batch:0
[ 0.012779] DMA32 zone: 8125 pages used for memmap
[ 0.012780] DMA32 zone: 519977 pages, LIFO batch:63
[ 0.021150] Normal zone: 57048 pages used for memmap
[ 0.021151] Normal zone: 3651072 pages, LIFO batch:63
[ 0.021684] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff]
[ 0.022016] ACPI: PM-Timer IO Port: 0x508
[ 0.022018] ACPI: Local APIC address 0xfee00000
[ 0.022033] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.022036] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.022038] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.022039] ACPI: IRQ0 used by override.
[ 0.022041] ACPI: IRQ9 used by override.
[ 0.022042] Using ACPI (MADT) for SMP configuration information
[ 0.022044] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.022049] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.022058] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.022060] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.022061] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.022061] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.022063] PM: hibernation: Registered nosave memory: [mem 0x7ff29000-0x829fffff]
[ 0.022064] PM: hibernation: Registered nosave memory: [mem 0x82a00000-0xefffffff]
[ 0.022065] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.022066] PM: hibernation: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
[ 0.022067] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.022068] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[ 0.022069] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.022069] PM: hibernation: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[ 0.022072] [mem 0x82a00000-0xefffffff] available for PCI devices
[ 0.022073] Booting paravirtualized kernel on bare hardware
[ 0.022076] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.025392] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.025545] percpu: Embedded 55 pages/cpu s188120 r8192 d28968 u524288
[ 0.025550] pcpu-alloc: s188120 r8192 d28968 u524288 alloc=1*2097152
[ 0.025551] pcpu-alloc: [0] 0 1 2 3
[ 0.025569] Built 1 zonelists, mobility grouping on. Total pages: 4109789
[ 0.025570] Policy zone: Normal
[ 0.025572] Kernel command line: BOOT_IMAGE=/vmlinuz-5.6.0-1-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed
[ 0.026365] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.026744] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.026795] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.039637] Memory: 2098888K/16700188K available (10243K kernel code, 1283K rwdata, 3968K rodata, 1608K init, 1988K bss, 440840K reserved, 0K cma-reserved)
[ 0.039643] random: get_random_u64 called from __kmem_cache_create+0x3e/0x530 with crng_init=0
[ 0.039736] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.039747] Kernel/User page tables isolation: enabled
[ 0.039758] ftrace: allocating 34607 entries in 136 pages
[ 0.050883] ftrace: allocated 136 pages with 2 groups
[ 0.050950] rcu: Hierarchical RCU implementation.
[ 0.050952] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.050953] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.050954] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.053539] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
[ 0.053742] random: crng done (trusting CPU's manufacturer)
[ 0.055293] Console: colour VGA+ 80x25
[ 0.061047] printk: console [tty0] enabled
[ 0.061112] ACPI: Core revision 20200110
[ 0.061227] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.061312] APIC: Switch to symmetric I/O mode setup
[ 0.061369] DMAR: Host address width 36
[ 0.061424] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.061484] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.061554] DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff
[ 0.061614] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.061673] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.061744] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.061803] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.061861] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.062302] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.062361] x2apic enabled
[ 0.062416] Switched APIC routing to cluster x2apic.
[ 0.062899] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.081314] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b4a4369fc, max_idle_ns: 440795306776 ns
[ 0.081391] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.65 BogoMIPS (lpj=11573312)
[ 0.081466] pid_max: default: 32768 minimum: 301
[ 0.081546] LSM: Security Framework initializing
[ 0.081607] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.081681] AppArmor: AppArmor initialized
[ 0.081737] TOMOYO Linux initialized
[ 0.081827] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.081921] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.082206] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.082270] process: using mwait in idle threads
[ 0.082328] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.082385] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.082444] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.082515] Spectre V2 : Mitigation: Full generic retpoline
[ 0.082572] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.082640] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.082700] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.082771] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.082831] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.082903] MDS: Mitigation: Clear CPU buffers
[ 0.083102] Freeing SMP alternatives memory: 32K
[ 0.084762] TSC deadline timer enabled
[ 0.084765] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.084936] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.085013] ... version: 3
[ 0.085069] ... bit width: 48
[ 0.085126] ... generic registers: 4
[ 0.085179] ... value mask: 0000ffffffffffff
[ 0.085237] ... max period: 00007fffffffffff
[ 0.085294] ... fixed-purpose events: 3
[ 0.085349] ... event mask: 000000070000000f
[ 0.085389] rcu: Hierarchical SRCU implementation.
[ 0.085389] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.085389] smp: Bringing up secondary CPUs ...
[ 0.085389] x86: Booting SMP configuration:
[ 0.085389] .... node #0, CPUs: #1
[ 0.085469] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.085641] #2 #3
[ 0.091528] smp: Brought up 1 node, 4 CPUs
[ 0.091528] smpboot: Max logical packages: 1
[ 0.091528] smpboot: Total of 4 processors activated (23146.62 BogoMIPS)
[ 0.137398] node 0 initialised, 3540115 pages in 44ms
[ 0.137711] devtmpfs: initialized
[ 0.137711] x86/mm: Memory block size: 128MB
[ 0.141832] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.141832] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.141832] pinctrl core: initialized pinctrl subsystem
[ 0.141832] thermal_sys: Registered thermal governor 'fair_share'
[ 0.141832] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.141832] thermal_sys: Registered thermal governor 'step_wise'
[ 0.141873] thermal_sys: Registered thermal governor 'user_space'
[ 0.142029] NET: Registered protocol family 16
[ 0.142208] audit: initializing netlink subsys (disabled)
[ 0.142267] audit: type=2000 audit(1589384403.080:1): state=initialized audit_enabled=0 res=1
[ 0.142267] cpuidle: using governor ladder
[ 0.142267] cpuidle: using governor menu
[ 0.142267] ACPI: bus type PCI registered
[ 0.142267] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.142267] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.142267] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.142267] PCI: Using configuration type 1 for base access
[ 0.142267] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.142657] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.289585] ACPI: Added _OSI(Module Device)
[ 0.289585] ACPI: Added _OSI(Processor Device)
[ 0.289585] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.289642] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.289700] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.289755] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.289813] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.291873] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.292601] ACPI: EC: EC started
[ 0.292654] ACPI: EC: interrupt blocked
[ 0.292997] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.293055] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
[ 0.293393] ACPI: Interpreter enabled
[ 0.293464] ACPI: (supports S0 S3 S4 S5)
[ 0.293520] ACPI: Using IOAPIC for interrupt routing
[ 0.293593] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.293774] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.296353] ACPI: Power Resource [FPWR] (off)
[ 0.296633] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.296696] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.296804] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.296883] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.297441] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
[ 0.297517] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff window] (conflicts with Adapter ROM [mem 0x000cf800-0x000d05ff])
[ 0.297731] PCI host bridge to bus 0000:00
[ 0.297787] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.297847] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.297906] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.297977] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.298047] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.298117] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.298187] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.298256] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.298321] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.298390] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.298461] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.298531] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.298601] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.298671] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.298739] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window]
[ 0.298808] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.298879] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.298944] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.299089] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.299157] pci 0000:00:02.0: reg 0x10: [mem 0xe2400000-0xe27fffff 64bit]
[ 0.299220] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.299292] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.299421] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.299488] pci 0000:00:04.0: reg 0x10: [mem 0xe2b30000-0xe2b37fff 64bit]
[ 0.299631] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.299711] pci 0000:00:14.0: reg 0x10: [mem 0xe2b20000-0xe2b2ffff 64bit]
[ 0.299835] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.299967] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.300044] pci 0000:00:19.0: reg 0x10: [mem 0xe2b00000-0xe2b1ffff]
[ 0.300109] pci 0000:00:19.0: reg 0x14: [mem 0xe2b3c000-0xe2b3cfff]
[ 0.300173] pci 0000:00:19.0: reg 0x18: [io 0x4040-0x405f]
[ 0.300287] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.300406] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.300483] pci 0000:00:1a.0: reg 0x10: [mem 0xe2b3f000-0xe2b3f3ff]
[ 0.300622] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.300755] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.300832] pci 0000:00:1b.0: reg 0x10: [mem 0xe2b38000-0xe2b3bfff 64bit]
[ 0.300961] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.301100] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400
[ 0.301310] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.301414] pci 0000:00:1c.0: Enabling MPC IRBNCE
[ 0.301471] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 0.301614] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400
[ 0.301850] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.301939] pci 0000:00:1c.1: Enabling MPC IRBNCE
[ 0.301996] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled
[ 0.302136] pci 0000:00:1c.2: [8086:1e18] type 01 class 0x060400
[ 0.302371] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.302458] pci 0000:00:1c.2: Enabling MPC IRBNCE
[ 0.302515] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
[ 0.302652] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.302730] pci 0000:00:1d.0: reg 0x10: [mem 0xe2b40000-0xe2b403ff]
[ 0.302867] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.302997] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.303222] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.303297] pci 0000:00:1f.2: reg 0x10: [io 0x4080-0x4087]
[ 0.303359] pci 0000:00:1f.2: reg 0x14: [io 0x4090-0x4093]
[ 0.303422] pci 0000:00:1f.2: reg 0x18: [io 0x4088-0x408f]
[ 0.303485] pci 0000:00:1f.2: reg 0x1c: [io 0x4094-0x4097]
[ 0.303549] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.303612] pci 0000:00:1f.2: reg 0x24: [mem 0xe2b3e000-0xe2b3e7ff]
[ 0.303708] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.303831] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.303906] pci 0000:00:1f.3: reg 0x10: [mem 0xe2b41000-0xe2b410ff 64bit]
[ 0.303981] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.304119] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[ 0.304199] pci 0000:00:1f.6: reg 0x10: [mem 0xe2b3d000-0xe2b3dfff 64bit]
[ 0.304483] pci 0000:01:00.0: [14e4:43a0] type 00 class 0x028000
[ 0.304635] pci 0000:01:00.0: reg 0x10: [mem 0xe2a00000-0xe2a07fff 64bit]
[ 0.304753] pci 0000:01:00.0: reg 0x18: [mem 0xe2800000-0xe29fffff 64bit]
[ 0.305061] pci 0000:01:00.0: supports D1 D2
[ 0.305118] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.305456] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.305521] pci 0000:00:1c.0: bridge window [mem 0xe2800000-0xe2afffff]
[ 0.305842] pci 0000:02:00.0: [1180:e822] type 00 class 0x080500
[ 0.306133] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.306436] pci 0000:02:00.0: reg 0x10: [mem 0xe0800000-0xe08000ff]
[ 0.307007] pci 0000:02:00.0: supports D1 D2
[ 0.307060] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.307708] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.307769] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.307831] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff]
[ 0.307897] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.308036] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.308095] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.308159] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff]
[ 0.308225] pci 0000:00:1c.2: bridge window [mem 0xe1400000-0xe1bfffff 64bit pref]
[ 0.308440] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.308535] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.308629] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.308723] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.308818] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.308911] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.309003] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.309099] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.309806] ACPI: EC: interrupt unblocked
[ 0.309869] ACPI: EC: event unblocked
[ 0.309926] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.309983] ACPI: EC: GPE=0x11
[ 0.310036] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events
[ 0.310160] iommu: Default domain type: Translated
[ 0.310227] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.310227] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.310227] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.310852] vgaarb: loaded
[ 0.310955] EDAC MC: Ver: 3.0.0
[ 0.313407] PCI: Using ACPI for IRQ routing
[ 0.313584] PCI: pci_cache_line_size set to 64 bytes
[ 0.314120] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.314121] e820: reserve RAM buffer [mem 0x7ff29000-0x7fffffff]
[ 0.314122] e820: reserve RAM buffer [mem 0x47b600000-0x47bffffff]
[ 0.314208] NetLabel: Initializing
[ 0.314263] NetLabel: domain hash size = 128
[ 0.314319] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.314388] NetLabel: unlabeled traffic allowed by default
[ 0.314951] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.315014] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.317400] clocksource: Switched to clocksource tsc-early
[ 0.326399] VFS: Disk quotas dquot_6.6.0
[ 0.326470] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.326621] AppArmor: AppArmor Filesystem Enabled
[ 0.326694] pnp: PnP ACPI init
[ 0.326899] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.326958] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.327017] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.327076] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.327135] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.327193] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.327252] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.327311] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.327369] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.327429] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.327493] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.327872] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.327934] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.327962] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.328021] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.328081] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.328096] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.328120] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.328139] pnp 00:05: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[ 0.328159] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.328182] pnp: PnP ACPI: found 7 devices
[ 0.333734] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.333836] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.333900] pci 0000:00:1c.0: bridge window [mem 0xe2800000-0xe2afffff]
[ 0.333969] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.334029] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.334093] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff]
[ 0.334156] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.334230] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.334288] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.334352] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff]
[ 0.334415] pci 0000:00:1c.2: bridge window [mem 0xe1400000-0xe1bfffff 64bit pref]
[ 0.334493] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.334553] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.334612] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.334671] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.334729] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.334789] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.334849] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff window]
[ 0.334909] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff window]
[ 0.334968] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff window]
[ 0.335027] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff window]
[ 0.335087] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff window]
[ 0.335147] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff window]
[ 0.335207] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff window]
[ 0.335263] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff window]
[ 0.335322] pci_bus 0000:00: resource 18 [mem 0x82a00000-0xefffffff window]
[ 0.335382] pci_bus 0000:00: resource 19 [mem 0xfed40000-0xfed44fff window]
[ 0.335440] pci_bus 0000:01: resource 1 [mem 0xe2800000-0xe2afffff]
[ 0.335500] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.335558] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe08fffff]
[ 0.335616] pci_bus 0000:02: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.335685] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.335744] pci_bus 0000:03: resource 1 [mem 0xe1c00000-0xe23fffff]
[ 0.335803] pci_bus 0000:03: resource 2 [mem 0xe1400000-0xe1bfffff 64bit pref]
[ 0.335932] NET: Registered protocol family 2
[ 0.336093] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.336180] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.336394] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.336557] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.336638] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.336723] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.336871] NET: Registered protocol family 1
[ 0.336931] NET: Registered protocol family 44
[ 0.336996] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.337794] PCI: CLS 64 bytes, default 64
[ 0.337886] Trying to unpack rootfs image as initramfs...
[ 1.119269] Freeing initrd memory: 62464K
[ 1.119358] DMAR: No ATSR found
[ 1.119439] DMAR: dmar0: Using Queued invalidation
[ 1.119500] DMAR: dmar1: Using Queued invalidation
[ 1.187713] pci 0000:00:00.0: Adding to iommu group 0
[ 1.190563] pci 0000:00:02.0: Adding to iommu group 1
[ 1.190633] pci 0000:00:02.0: Using iommu direct mapping
[ 1.190720] pci 0000:00:04.0: Adding to iommu group 2
[ 1.190813] pci 0000:00:14.0: Adding to iommu group 3
[ 1.190903] pci 0000:00:19.0: Adding to iommu group 4
[ 1.190999] pci 0000:00:1a.0: Adding to iommu group 5
[ 1.191091] pci 0000:00:1b.0: Adding to iommu group 6
[ 1.191187] pci 0000:00:1c.0: Adding to iommu group 7
[ 1.191276] pci 0000:00:1c.1: Adding to iommu group 8
[ 1.191363] pci 0000:00:1c.2: Adding to iommu group 9
[ 1.191452] pci 0000:00:1d.0: Adding to iommu group 10
[ 1.192867] pci 0000:00:1f.0: Adding to iommu group 11
[ 1.192933] pci 0000:00:1f.2: Adding to iommu group 11
[ 1.193000] pci 0000:00:1f.3: Adding to iommu group 11
[ 1.193066] pci 0000:00:1f.6: Adding to iommu group 11
[ 1.193164] pci 0000:01:00.0: Adding to iommu group 12
[ 1.193253] pci 0000:02:00.0: Adding to iommu group 13
[ 1.193314] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 1.195392] Initialise system trusted keyrings
[ 1.195458] Key type blacklist registered
[ 1.195552] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 1.196606] zbud: loaded
[ 1.196790] Platform Keyring initialized
[ 1.196848] Key type asymmetric registered
[ 1.196905] Asymmetric key parser 'x509' registered
[ 1.196969] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.197075] io scheduler mq-deadline registered
[ 1.197371] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26
[ 1.197639] pcieport 0000:00:1c.1: PME: Signaling with IRQ 27
[ 1.197724] pcieport 0000:00:1c.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 1.198065] pcieport 0000:00:1c.2: PME: Signaling with IRQ 28
[ 1.198150] pcieport 0000:00:1c.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 1.198364] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.198435] intel_idle: MWAIT substates: 0x21120
[ 1.198436] intel_idle: v0.4.1 model 0x3A
[ 1.198581] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.199943] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.200004] ACPI: Thermal Zone [THM0] (58 C)
[ 1.200930] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.200988] ACPI: Thermal Zone [THM1] (27 C)
[ 1.201143] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.201639] Linux agpgart interface v0.103
[ 1.201737] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.201797] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 1.202071] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.203819] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.203879] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.204077] mousedev: PS/2 mouse device common for all mice
[ 1.204166] rtc_cmos 00:03: RTC can wake from S4
[ 1.204401] rtc_cmos 00:03: registered as rtc0
[ 1.204471] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.204561] intel_pstate: Intel P-state driver initializing
[ 1.204799] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.205034] drop_monitor: Initializing network drop monitor service
[ 1.205461] NET: Registered protocol family 10
[ 1.205676] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.222411] Segment Routing with IPv6
[ 1.222518] mip6: Mobile IPv6
[ 1.222579] NET: Registered protocol family 17
[ 1.222799] mpls_gso: MPLS GSO support
[ 1.223429] microcode: sig=0x306a9, pf=0x10, revision=0x21
[ 1.223509] microcode: Microcode Update Driver: v2.2.
[ 1.223512] IPI shorthand broadcast: enabled
[ 1.223638] sched_clock: Marking stable (1215656103, 7669379)->(1230337429, -7011947)
[ 1.223834] registered taskstats version 1
[ 1.223893] Loading compiled-in X.509 certificates
[ 1.260043] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.260127] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 1.260201] zswap: loaded using pool lzo/zbud
[ 1.260358] Key type ._fscrypt registered
[ 1.260413] Key type .fscrypt registered
[ 1.260469] Key type fscrypt-provisioning registered
[ 1.260535] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.260846] rtc_cmos 00:03: setting system clock to 2020-05-13T15:40:04 UTC (1589384404)
[ 1.262220] Freeing unused kernel image (initmem) memory: 1608K
[ 1.285439] Write protecting the kernel read-only data: 16384k
[ 1.286209] Freeing unused kernel image (text/rodata gap) memory: 2044K
[ 1.286462] Freeing unused kernel image (rodata/data gap) memory: 128K
[ 1.322467] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.322525] x86/mm: Checking user space page tables
[ 1.348891] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.348949] Run /init as init process
[ 1.349004] with arguments:
[ 1.349005] /init
[ 1.349005] with environment:
[ 1.349006] HOME=/
[ 1.349006] TERM=linux
[ 1.349007] BOOT_IMAGE=/vmlinuz-5.6.0-1-amd64
[ 1.460228] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:25/PNP0C09:00/PNP0C0E:00/input/input2
[ 1.461818] ACPI: Sleep Button [SLPB]
[ 1.461926] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:25/PNP0C09:00/PNP0C0D:00/input/input3
[ 1.462039] ACPI: Lid Switch [LID]
[ 1.463061] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.463174] ACPI: Power Button [PWRF]
[ 1.481734] pps_core: LinuxPPS API ver. 1 registered
[ 1.481795] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.483250] PTP clock support registered
[ 1.495297] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 1.495509] battery: ACPI: Battery Slot [BAT1] (battery absent)
[ 1.497217] ACPI: bus type USB registered
[ 1.497297] usbcore: registered new interface driver usbfs
[ 1.497366] usbcore: registered new interface driver hub
[ 1.497459] usbcore: registered new device driver usb
[ 1.501276] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20200110/utaddress-204)
[ 1.501371] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.501525] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20200110/utaddress-204)
[ 1.501616] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.501689] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20200110/utaddress-204)
[ 1.501779] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.501852] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20200110/utaddress-204)
[ 1.501941] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.502013] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.507308] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.511609] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.511678] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.512833] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930
[ 1.512912] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.513135] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[ 1.513208] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.513277] usb usb1: Product: xHCI Host Controller
[ 1.513335] usb usb1: Manufacturer: Linux 5.6.0-1-amd64 xhci-hcd
[ 1.513400] usb usb1: SerialNumber: 0000:00:14.0
[ 1.513555] hub 1-0:1.0: USB hub found
[ 1.513623] hub 1-0:1.0: 4 ports detected
[ 1.513792] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.513862] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.513923] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.513996] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.514115] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
[ 1.514187] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.514259] usb usb2: Product: xHCI Host Controller
[ 1.514318] usb usb2: Manufacturer: Linux 5.6.0-1-amd64 xhci-hcd
[ 1.514379] usb usb2: SerialNumber: 0000:00:14.0
[ 1.514530] hub 2-0:1.0: USB hub found
[ 1.514599] hub 2-0:1.0: 4 ports detected
[ 1.524862] SCSI subsystem initialized
[ 1.531853] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.531915] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.532137] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.534787] sdhci: Secure Digital Host Controller Interface driver
[ 1.534846] sdhci: Copyright(c) Pierre Ossman
[ 1.539929] ehci-pci: EHCI PCI platform driver
[ 1.540142] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.540208] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.540294] ehci-pci 0000:00:1a.0: debug port 2
[ 1.544274] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.544346] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe2b3f000
[ 1.549556] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 7)
[ 1.550111] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.550380] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 1.558476] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.559018] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[ 1.561535] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.561663] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[ 1.561738] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.561808] usb usb3: Product: EHCI Host Controller
[ 1.561870] usb usb3: Manufacturer: Linux 5.6.0-1-amd64 ehci_hcd
[ 1.561931] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.563149] hub 3-0:1.0: USB hub found
[ 1.563216] hub 3-0:1.0: 3 ports detected
[ 1.563546] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.563612] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.563696] ehci-pci 0000:00:1d.0: debug port 2
[ 1.564415] libata version 3.00 loaded.
[ 1.567683] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.567752] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe2b40000
[ 1.570626] ahci 0000:00:1f.2: version 3.0
[ 1.570802] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.573560] cryptd: max_cpu_qlen set to 1000
[ 1.590118] AVX version of gcm_enc/dec engaged.
[ 1.590178] AES CTR mode by8 optimization enabled
[ 1.593828] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
[ 1.593903] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.594705] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.594811] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[ 1.594882] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.594951] usb usb4: Product: EHCI Host Controller
[ 1.595008] usb usb4: Manufacturer: Linux 5.6.0-1-amd64 ehci_hcd
[ 1.595067] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.595240] hub 4-0:1.0: USB hub found
[ 1.595301] hub 4-0:1.0: 3 ports detected
[ 1.595694] scsi host0: ahci
[ 1.595879] scsi host1: ahci
[ 1.596022] scsi host2: ahci
[ 1.596168] scsi host3: ahci
[ 1.596310] scsi host4: ahci
[ 1.596452] scsi host5: ahci
[ 1.596555] ata1: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e100 irq 31
[ 1.596626] ata2: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e180 irq 31
[ 1.596701] ata3: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e200 irq 31
[ 1.596770] ata4: DUMMY
[ 1.596825] ata5: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e300 irq 31
[ 1.596894] ata6: DUMMY
[ 1.642073] i915 0000:00:02.0: VT-d active for gfx access
[ 1.642134] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 1.643050] Console: switching to colour dummy device 80x25
[ 1.643125] i915 0000:00:02.0: DMAR active, disabling use of stolen memory
[ 1.651456] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.693309] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.693321] [drm] Driver supports precise vblank timestamp query.
[ 1.694045] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.706573] mmc0: new high speed SD card at address e42f
[ 1.709536] mmcblk0: mmc0:e42f SD02G 1.89 GiB
[ 1.726280] mmcblk0: p1
[ 1.747251] [drm] Initialized i915 1.6.0 20200114 for 0000:00:02.0 on minor 0
[ 1.747488] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.749084] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:46:56:66
[ 1.749088] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.749126] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 1.750053] e1000e 0000:00:19.0 eno0: renamed from eth0
[ 1.774966] acpi device:30: registered as cooling_device5
[ 1.775064] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 1.913492] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.914460] usb 2-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1.924009] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.925180] ata1.00: ATA-9: KINGSTON SKC400S37512G, SAFM001B, max UDMA/133
[ 1.925193] ata1.00: 1000215216 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 1.925636] ata1.00: configured for UDMA/133
[ 1.925942] scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC400S 001B PQ: 0 ANSI: 5
[ 1.933444] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.942426] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.942441] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.942992] hub 3-1:1.0: USB hub found
[ 1.943113] hub 3-1:1.0: 6 ports detected
[ 1.982294] usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.982306] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.982842] hub 4-1:1.0: USB hub found
[ 1.983005] hub 4-1:1.0: 8 ports detected
[ 2.058788] usb 2-3: New USB device found, idVendor=2109, idProduct=0813, bcdDevice= 2.21
[ 2.058794] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.058797] usb 2-3: Product: USB3.0 Hub
[ 2.058800] usb 2-3: Manufacturer: VIA Labs, Inc.
[ 2.060875] hub 2-3:1.0: USB hub found
[ 2.061224] hub 2-3:1.0: 4 ports detected
[ 2.081474] fbcon: i915drmfb (fb0) is primary device
[ 2.181492] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[ 2.205505] tsc: Refined TSC clocksource calibration: 2893.428 MHz
[ 2.205526] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b502e9c9f, max_idle_ns: 440795289850 ns
[ 2.205572] clocksource: Switched to clocksource tsc
[ 2.208626] usb 1-3: New USB device found, idVendor=2109, idProduct=2813, bcdDevice= 2.21
[ 2.208629] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.208631] usb 1-3: Product: USB2.0 Hub
[ 2.208633] usb 1-3: Manufacturer: VIA Labs, Inc.
[ 2.209663] hub 1-3:1.0: USB hub found
[ 2.210449] hub 1-3:1.0: 4 ports detected
[ 2.227511] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
[ 2.233436] usb 3-1.3: new full-speed USB device number 3 using ehci-pci
[ 2.240280] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.273433] usb 4-1.5: new high-speed USB device number 3 using ehci-pci
[ 2.277521] ata2.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133
[ 2.277524] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 2.289036] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262
[ 2.289045] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 2.302511] usb 4-1.5: New USB device found, idVendor=17ef, idProduct=100a, bcdDevice= 0.00
[ 2.302514] usb 4-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.303287] hub 4-1.5:1.0: USB hub found
[ 2.303629] hub 4-1.5:1.0: 6 ports detected
[ 2.327383] ata2.00: configured for UDMA/133
[ 2.328137] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 2.336796] scsi 1:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5
[ 2.347092] usb 3-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01
[ 2.347096] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.347099] usb 3-1.3: Product: Biometric Coprocessor
[ 2.347100] usb 3-1.3: Manufacturer: Auth
[ 2.425482] usb 3-1.4: new full-speed USB device number 4 using ehci-pci
[ 2.538022] usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12
[ 2.538025] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.538028] usb 3-1.4: Product: BCM20702A0
[ 2.538030] usb 3-1.4: Manufacturer: Broadcom Corp
[ 2.538032] usb 3-1.4: SerialNumber: B8763FA9D32E
[ 2.593488] usb 4-1.5.1: new full-speed USB device number 4 using ehci-pci
[ 2.617485] usb 3-1.6: new high-speed USB device number 5 using ehci-pci
[ 2.652424] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.652872] ata3.00: supports DRM functions and may not be fully accessible
[ 2.652976] ata3.00: ATA-11: KINGSTON SUV500MS240G, 003056RR, max UDMA/133
[ 2.652979] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 2.653867] ata3.00: Trusted Computing capability qword not valid!
[ 2.653895] usb 3-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11
[ 2.653902] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.653908] usb 3-1.6: Product: Integrated Camera
[ 2.653910] usb 3-1.6: Manufacturer: Ricoh Company Ltd.
[ 2.654438] ata3.00: supports DRM functions and may not be fully accessible
[ 2.655318] ata3.00: Trusted Computing capability qword not valid!
[ 2.655328] ata3.00: configured for UDMA/133
[ 2.655604] scsi 2:0:0:0: Direct-Access ATA KINGSTON SUV500M 56RR PQ: 0 ANSI: 5
[ 2.707808] usb 4-1.5.1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.11
[ 2.707811] usb 4-1.5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.707814] usb 4-1.5.1: Product: USB Receiver
[ 2.707816] usb 4-1.5.1: Manufacturer: Logitech
[ 2.719568] hid: raw HID events driver (C) Jiri Kosina
[ 2.728113] usbcore: registered new interface driver usbhid
[ 2.728114] usbhid: USB HID core driver
[ 2.730568] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.0/0003:046D:C52B.0001/input/input8
[ 2.789490] usb 4-1.5.4: new high-speed USB device number 5 using ehci-pci
[ 2.790433] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input0
[ 2.791386] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.1/0003:046D:C52B.0002/input/input9
[ 2.791779] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.1/0003:046D:C52B.0002/input/input10
[ 2.818808] usb 4-1.5.4: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00
[ 2.818811] usb 4-1.5.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.819358] hub 4-1.5.4:1.0: USB hub found
[ 2.819696] hub 4-1.5.4:1.0: 4 ports detected
[ 2.849694] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.1/0003:046D:C52B.0002/input/input11
[ 2.850095] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input1
[ 2.851368] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input2
[ 2.914695] Console: switching to colour frame buffer device 240x67
[ 2.968397] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.968986] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 2.970937] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 3.002174] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input2
[ 3.010055] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
[ 3.010984] sd 1:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 3.010995] sd 2:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 3.010996] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[ 3.011005] sd 2:0:0:0: [sdb] Write Protect is off
[ 3.011007] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.011021] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.012255] sd 0:0:0:0: [sda] Write Protect is off
[ 3.014327] sd 1:0:0:0: [sdc] 4096-byte physical blocks
[ 3.016402] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.016788] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.018747] sd 1:0:0:0: [sdc] Write Protect is off
[ 3.027880] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.027947] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.030217] sdb: sdb1 sdb2 sdb3
[ 3.032944] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 3.034608] sda: sda1 sda2 < sda5 >
[ 3.036934] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.058892] sdc: sdc1
[ 3.061074] sd 1:0:0:0: [sdc] Attached SCSI disk
[ 3.089405] usb 4-1.5.3: new full-speed USB device number 6 using ehci-pci
[ 3.123142] input: Logitech Unifying Device. Wireless PID:1028 Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.2/0003:046D:C52B.0003/0003:046D:1028.0004/input/input13
[ 3.126945] hid-generic 0003:046D:1028.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on usb-0000:00:1d.0-1.5.1/input2:1
[ 3.160962] input: Logitech M570 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.2/0003:046D:C52B.0003/0003:046D:1028.0004/input/input17
[ 3.163274] logitech-hidpp-device 0003:046D:1028.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M570] on usb-0000:00:1d.0-1.5.1/input2:1
[ 3.201116] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
[ 3.201242] usb 4-1.5.3: New USB device found, idVendor=04b4, idProduct=4042, bcdDevice= 1.03
[ 3.207547] usb 4-1.5.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.213593] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.3/4-1.5.3:1.0/0003:04B4:4042.0005/input/input18
[ 3.273552] hid-generic 0003:04B4:4042.0005: input,hidraw2: USB HID v1.11 Keyboard [HID 04b4:4042] on usb-0000:00:1d.0-1.5.3/input0
[ 3.279116] usb 4-1.5.4.1: new high-speed USB device number 7 using ehci-pci
[ 3.280246] input: HID 04b4:4042 Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.3/4-1.5.3:1.1/0003:04B4:4042.0006/input/input19
[ 3.284305] input: HID 04b4:4042 System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.3/4-1.5.3:1.1/0003:04B4:4042.0006/input/input20
[ 3.310476] usb 4-1.5.4.1: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00
[ 3.312445] usb 4-1.5.4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.314805] hub 4-1.5.4.1:1.0: USB hub found
[ 3.317206] hub 4-1.5.4.1:1.0: 4 ports detected
[ 3.369394] raid6: sse2x4 gen() 14444 MB/s
[ 3.401403] usb 4-1.5.4.3: new full-speed USB device number 8 using ehci-pci
[ 3.437394] raid6: sse2x4 xor() 7546 MB/s
[ 3.505394] raid6: sse2x2 gen() 15281 MB/s
[ 3.510396] usb 4-1.5.4.3: New USB device found, idVendor=1a86, idProduct=5512, bcdDevice= 3.04
[ 3.512880] usb 4-1.5.4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.573394] raid6: sse2x2 xor() 5459 MB/s
[ 3.605403] usb 4-1.5.4.1.2: new full-speed USB device number 9 using ehci-pci
[ 3.641393] raid6: sse2x1 gen() 12964 MB/s
[ 3.709392] raid6: sse2x1 xor() 8486 MB/s
[ 3.710944] raid6: using algorithm sse2x2 gen() 15281 MB/s
[ 3.712475] raid6: .... xor() 5459 MB/s, rmw enabled
[ 3.714025] raid6: using ssse3x2 recovery algorithm
[ 3.715623] input: HID 04b4:4042 Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.3/4-1.5.3:1.1/0003:04B4:4042.0006/input/input21
[ 3.717618] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.3/4-1.5.3:1.1/0003:04B4:4042.0006/input/input22
[ 3.717638] xor: automatically using best checksumming function avx
[ 3.719738] input: HID 04b4:4042 Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.3/4-1.5.3:1.1/0003:04B4:4042.0006/input/input23
[ 3.723045] hid-generic 0003:04B4:4042.0006: input,hiddev1,hidraw3: USB HID v1.11 Mouse [HID 04b4:4042] on usb-0000:00:1d.0-1.5.3/input1
[ 3.725108] async_tx: api initialized (async)
[ 3.731283] usb 4-1.5.4.1.2: New USB device found, idVendor=067b, idProduct=2305, bcdDevice= 2.02
[ 3.732932] usb 4-1.5.4.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.736103] usb 4-1.5.4.1.2: Product: IEEE-1284 Controller
[ 3.738570] usb 4-1.5.4.1.2: Manufacturer: Prolific Technology Inc.
[ 3.821497] usb 4-1.5.4.1.3: new full-speed USB device number 10 using ehci-pci
[ 3.935169] usb 4-1.5.4.1.3: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 4.00
[ 3.939126] usb 4-1.5.4.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.942958] usb 4-1.5.4.1.3: Product: USB-Serial Controller D
[ 3.946729] usb 4-1.5.4.1.3: Manufacturer: Prolific Technology Inc.
[ 3.972540] device-mapper: uevent: version 1.0.3
[ 3.974304] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
[ 9.621116] process '/usr/bin/fstype' started with executable stack
[ 9.942352] PM: Image not found (code -22)
[ 9.948080] PM: hibernation: Marking nosave pages: [mem 0x00000000-0x00000fff]
[ 9.948083] PM: hibernation: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[ 9.948088] PM: hibernation: Marking nosave pages: [mem 0x7ff29000-0xffffffff]
[ 9.950767] PM: hibernation: Basic memory bitmaps created
[ 9.951762] PM: hibernation: Basic memory bitmaps freed
[ 9.952643] video LNXVIDEO:00: Restoring backlight state
[ 10.068720] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 10.138317] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 10.316578] systemd[1]: Inserted module 'autofs4'
[ 10.343204] systemd[1]: systemd 245.5-2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 10.365654] systemd[1]: Detected architecture x86-64.
[ 10.392648] systemd[1]: Set hostname to <TP-T430s>.
[ 10.527720] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 10.554184] systemd[1]: /lib/systemd/system/thinkfan.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/thinkfan.pid → /run/thinkfan.pid; please update the unit file accordingly.
[ 10.558181] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
[ 10.578442] systemd[1]: /lib/systemd/system/fancontrol.service:11: PIDFile= references a path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly.
[ 10.581271] systemd[1]: /lib/systemd/system/docker.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock → /run/docker.sock; please update the unit file accordingly.
[ 10.615149] systemd[1]: Created slice system-getty.slice.
[ 10.617253] systemd[1]: Created slice system-modprobe.slice.
[ 10.622403] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 10.627657] systemd[1]: Created slice Cryptsetup Units Slice.
[ 10.634514] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 10.639696] systemd[1]: Created slice system-tor.slice.
[ 10.643496] systemd[1]: Created slice User and Session Slice.
[ 10.647050] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 10.650870] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 10.654474] systemd[1]: Reached target User and Group Name Lookups.
[ 10.658067] systemd[1]: Reached target Remote File Systems.
[ 10.659628] systemd[1]: Reached target Slices.
[ 10.663257] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 10.666851] systemd[1]: Listening on LVM2 poll daemon socket.
[ 10.670460] systemd[1]: Listening on Syslog Socket.
[ 10.674016] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 10.677492] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 10.681093] systemd[1]: Listening on Journal Audit Socket.
[ 10.684571] systemd[1]: Listening on Journal Socket (/dev/log).
[ 10.688118] systemd[1]: Listening on Journal Socket.
[ 10.691633] systemd[1]: Listening on udev Control Socket.
[ 10.695082] systemd[1]: Listening on udev Kernel Socket.
[ 10.699589] systemd[1]: Mounting Huge Pages File System...
[ 10.703671] systemd[1]: Mounting POSIX Message Queue File System...
[ 10.707772] systemd[1]: Mounting Kernel Debug File System...
[ 10.711662] systemd[1]: Mounting Kernel Trace File System...
[ 10.715686] systemd[1]: Starting Availability of block devices...
[ 10.719690] systemd[1]: Starting Set the console keyboard layout...
[ 10.724213] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 10.728145] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 10.730946] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[ 10.731738] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 10.734598] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 10.736399] systemd[1]: Starting Journal Service...
[ 10.744003] systemd[1]: Starting Load Kernel Modules...
[ 10.748362] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 10.752954] systemd[1]: Starting udev Coldplug all Devices...
[ 10.758619] systemd[1]: Mounted Huge Pages File System.
[ 10.761434] systemd[1]: Mounted POSIX Message Queue File System.
[ 10.764493] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 10.767436] systemd[1]: Mounted Kernel Debug File System.
[ 10.770855] systemd[1]: Mounted Kernel Trace File System.
[ 10.776518] systemd[1]: Finished Availability of block devices.
[ 10.781908] systemd[1]: Finished Set the console keyboard layout.
[ 10.786986] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 10.790081] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 10.794197] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 10.794252] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 10.795267] systemd[1]: Starting Load/Save Random Seed...
[ 10.802056] systemd[1]: Starting Create System Users...
[ 10.811273] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 10.817323] systemd[1]: Finished Load/Save Random Seed.
[ 10.829570] systemd[1]: Finished Create System Users.
[ 10.833164] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 10.858143] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 10.859732] systemd[1]: Reached target Local File Systems (Pre).
[ 10.862793] systemd[1]: Condition check resulted in Virtual Machine and Container Storage (Compatibility) being skipped.
[ 10.862815] systemd[1]: Reached target Containers.
[ 10.868830] systemd[1]: Starting udev Kernel Device Manager...
[ 10.880730] systemd[1]: Finished udev Coldplug all Devices.
[ 10.884502] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[ 10.890428] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
[ 10.929588] loop: module loaded
[ 10.944084] lp: driver loaded but no devices found
[ 10.948238] ppdev: user-space parallel port driver
[ 10.956376] systemd[1]: Finished Load Kernel Modules.
[ 10.958085] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[ 10.959552] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
[ 10.962070] systemd[1]: Starting Apply Kernel Variables...
[ 10.974351] systemd[1]: Finished Apply Kernel Variables.
[ 10.976378] systemd[1]: Started udev Kernel Device Manager.
[ 10.981577] systemd[1]: Starting Show Plymouth Boot Screen...
[ 11.010685] systemd[1]: Started Show Plymouth Boot Screen.
[ 11.012860] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
[ 11.017259] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
[ 11.105347] systemd[1]: Started Journal Service.
[ 11.119482] systemd-journald[471]: Received client request to flush runtime journal.
[ 11.194164] ACPI: AC Adapter [AC] (on-line)
[ 11.214004] Non-volatile memory driver v1.3
[ 11.221454] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 11.271076] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 11.273045] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 11.275009] thinkpad_acpi: ThinkPad BIOS CBET4000 4.12, EC G7HT39WW-3.22
[ 11.277017] thinkpad_acpi: Lenovo ThinkPad T430s, model 23532NU
[ 11.283221] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 11.285505] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 11.288269] input: PC Speaker as /devices/platform/pcspkr/input/input24
[ 11.290528] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 11.293131] iTCO_vendor_support: vendor-support=0
[ 11.294594] thinkpad_acpi: radio switch found; radios are enabled
[ 11.303091] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 11.305487] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 11.307414] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 11.320118] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 11.324103] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
[ 11.330044] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 11.332045] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 11.336073] thinkpad_acpi: battery 1 registered (start 0, stop 100)
[ 11.336078] battery: new extension: ThinkPad Battery Extension
[ 11.339971] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input25
[ 11.342484] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 11.349061] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 11.356619] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 11.358679] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 11.360734] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 11.362730] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 11.370422] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.476041] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 11.483402] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 11.485623] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 11.487804] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 11.500267] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[ 11.502793] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[ 11.610863] wl: loading out-of-tree module taints kernel.
[ 11.612854] wl: module license 'MIXED/Proprietary' taints kernel.
[ 11.614841] Disabling lock debugging due to kernel taint
[ 11.642301] wl: module verification failed: signature and/or required key missing - tainting kernel
[ 11.668502] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 11.698763] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 11.698765] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.698767] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 11.698768] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 11.698769] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 11.698771] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 11.698772] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 11.698773] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 11.700853] wlan0: Broadcom BCM43a0 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)
[ 11.745462] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26
[ 11.745529] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27
[ 11.745590] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input28
[ 11.745649] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input29
[ 11.745708] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input30
[ 11.745956] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input31
[ 11.746017] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input32
[ 11.746099] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input33
[ 11.777463] Adding 16699388k swap on /dev/mapper/TP--T430s--vg-swap_1. Priority:-2 extents:1 across:16699388k SSFS
[ 11.812125] wl 0000:01:00.0 wlp1s0: renamed from wlan0
[ 11.837874] intel_rapl_common: Found RAPL domain package
[ 11.837876] intel_rapl_common: Found RAPL domain core
[ 11.837876] intel_rapl_common: Found RAPL domain uncore
[ 12.007896] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 12.014234] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 12.016249] ext2 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[ 12.071874] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 12.074671] audit: type=1400 audit(1589384415.308:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1096 comm="apparmor_parser"
[ 12.079030] audit: type=1400 audit(1589384415.312:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="unreal" pid=1097 comm="apparmor_parser"
[ 12.081128] audit: type=1400 audit(1589384415.312:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1098 comm="apparmor_parser"
[ 12.083389] audit: type=1400 audit(1589384415.312:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1098 comm="apparmor_parser"
[ 12.083392] audit: type=1400 audit(1589384415.312:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1098 comm="apparmor_parser"
[ 12.087821] audit: type=1400 audit(1589384415.320:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld" pid=1099 comm="apparmor_parser"
[ 12.096386] audit: type=1400 audit(1589384415.328:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ut99" pid=1105 comm="apparmor_parser"
[ 12.098587] audit: type=1400 audit(1589384415.332:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ioquake3" pid=1102 comm="apparmor_parser"
[ 12.100558] audit: type=1400 audit(1589384415.332:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ioquake3//popup" pid=1102 comm="apparmor_parser"
[ 12.103121] audit: type=1400 audit(1589384415.336:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=1100 comm="apparmor_parser"
[ 12.473349] Process accounting resumed
[ 12.479145] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input34
[ 13.046956] vboxdrv: Found 4 processor cores
[ 13.076976] vboxdrv: TSC mode is Invariant, tentative frequency 2893427954 Hz
[ 13.078396] vboxdrv: Successfully loaded version 6.1.6 (interface 0x002d0001)
[ 13.296195] VBoxNetFlt: Successfully started.
[ 13.305458] VBoxNetAdp: Successfully started.
[ 13.765469] mc: Linux media interface: v0.10
[ 13.789749] videodev: Linux video capture interface: v2.00
[ 13.922050] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5)
[ 13.929247] uvcvideo 3-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 13.930676] uvcvideo 3-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 13.932068] uvcvideo 3-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 13.934551] uvcvideo 3-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 13.936057] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input35
[ 13.937629] usbcore: registered new interface driver uvcvideo
[ 13.939016] USB Video Class driver (1.1.1)
[ 14.048630] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 14.138118] Bluetooth: Core ver 2.22
[ 14.139538] NET: Registered protocol family 31
[ 14.140928] Bluetooth: HCI device and connection manager initialized
[ 14.142181] Bluetooth: HCI socket layer initialized
[ 14.143288] Bluetooth: L2CAP socket layer initialized
[ 14.144364] Bluetooth: SCO socket layer initialized
[ 14.159284] usbcore: registered new interface driver btusb
[ 14.204410] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 14.205857] Bluetooth: BNEP filters: protocol multicast
[ 14.207308] Bluetooth: BNEP socket layer initialized
[ 14.271633] Bluetooth: hci0: BCM: chip id 63
[ 14.273642] Bluetooth: hci0: BCM: features 0x07
[ 14.291643] Bluetooth: hci0: TP-T430s
[ 14.294647] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669
[ 14.297707] bluetooth hci0: firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21e6.hcd
[ 14.469738] fuse: init (API version 7.31)
[ 15.179639] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669
[ 15.195644] Bluetooth: hci0: Broadcom Bluetooth Device
[ 15.293417] Bluetooth: RFCOMM TTY layer initialized
[ 15.293424] Bluetooth: RFCOMM socket layer initialized
[ 15.293429] Bluetooth: RFCOMM ver 1.11
[ 15.929491] usbcore: registered new interface driver usbserial_generic
[ 15.929502] usbserial: USB Serial support registered for generic
[ 15.949832] usblp 4-1.5.4.1.2:1.0: usblp2: USB Bidirectional printer dev 9 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
[ 15.949937] usbcore: registered new interface driver usblp
[ 15.954797] usbcore: registered new interface driver pl2303
[ 15.954810] usbserial: USB Serial support registered for pl2303
[ 15.954842] pl2303 4-1.5.4.1.3:1.0: pl2303 converter detected
[ 15.972696] usb 4-1.5.4.1.3: pl2303 converter now attached to ttyUSB0
[ 17.639496] rfkill: input handler disabled
[ 18.355165] e1000e 0000:00:19.0 eno0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 18.355205] IPv6: ADDRCONF(NETDEV_CHANGE): eno0: link becomes ready
[ 23.035407] e1000e 0000:00:19.0 eno0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 23.276848] kauditd_printk_skb: 31 callbacks suppressed
[ 23.276849] audit: type=1400 audit(1589384426.508:43): apparmor="DENIED" operation="open" profile="/usr/bin/freshclam" name="/run/systemd/userdb/" pid=2571 comm="freshclam" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 23.749212] audit: type=1400 audit(1589384426.980:44): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=2974 comm="apparmor_parser"
[ 23.969617] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 23.972311] Bridge firewalling registered
[ 24.162855] Initializing XFRM netlink socket
[ 33.884067] rfkill: input handler enabled
[ 35.460661] logitech-hidpp-device 0003:046D:1028.0004: HID++ 1.0 device connected.
[ 37.159816] audit: type=1400 audit(1589384440.392:45): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/telepathy-*" name="/sys/devices/system/node/" pid=3662 comm="telepathy-haze" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 37.643190] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 37.870705] rfkill: input handler disabled