[    0.000000] Linux version 4.12.8-1-ARCH (builduser@tobias) (gcc version 7.1.1 20170630 (GCC) ) #1 SMP PREEMPT Thu Aug 17 08:37:20 CEST 2017
[    0.000000] Command line: BOOT_IMAGE=../vmlinuz-linux root=UUID=2c366ba5-ae1a-48ef-895d-745c6adb516c rw rootflags=subvol=arch initrd=../initramfs-linux.img
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff07fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ff08000-0x00000000829fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027b5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: HP EliteBook 2570p/EliteBook 2570p, BIOS 4.6-1111-gaeb2d64c85 08/19/2017
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x27b600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 080000000 mask FC0000000 uncachable
[    0.000000]   1 base 0C0000000 mask FE0000000 uncachable
[    0.000000]   2 base 0E0000000 mask FF0000000 write-combining
[    0.000000]   3 base 0F0000000 mask FF0000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x7ff08 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff893e80099000] 99000 size 24576
[    0.000000] BRK [0x258d5f000, 0x258d5ffff] PGTABLE
[    0.000000] BRK [0x258d60000, 0x258d60fff] PGTABLE
[    0.000000] BRK [0x258d61000, 0x258d61fff] PGTABLE
[    0.000000] BRK [0x258d62000, 0x258d62fff] PGTABLE
[    0.000000] BRK [0x258d63000, 0x258d63fff] PGTABLE
[    0.000000] BRK [0x258d64000, 0x258d64fff] PGTABLE
[    0.000000] BRK [0x258d65000, 0x258d65fff] PGTABLE
[    0.000000] BRK [0x258d66000, 0x258d66fff] PGTABLE
[    0.000000] BRK [0x258d67000, 0x258d67fff] PGTABLE
[    0.000000] BRK [0x258d68000, 0x258d68fff] PGTABLE
[    0.000000] BRK [0x258d69000, 0x258d69fff] PGTABLE
[    0.000000] BRK [0x258d6a000, 0x258d6afff] PGTABLE
[    0.000000] RAMDISK: [mem 0x7f752000-0x7ff07fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F7750 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x000000007FF2E0E0 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x000000007FF317E0 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x000000007FF2E280 003556 (v03 COREv4 COREBOOT 20141018 INTL 20170531)
[    0.000000] ACPI: FACS 0x000000007FF2E240 000040
[    0.000000] ACPI: FACS 0x000000007FF2E240 000040
[    0.000000] ACPI: SSDT 0x000000007FF318E0 002B90 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: MCFG 0x000000007FF34470 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: TCPA 0x000000007FF344B0 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x000000007FF344F0 00008C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DMAR 0x000000007FF34580 0000A8 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x000000007FF34630 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000027b5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x27b5fb000-0x27b5fffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000027b5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007ff07fff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000027b5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027b5fffff]
[    0.000000] On node 0 totalpages: 2077862
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8125 pages used for memmap
[    0.000000]   DMA32 zone: 519944 pages, LIFO batch:31
[    0.000000]   Normal zone: 24280 pages used for memmap
[    0.000000]   Normal zone: 1553920 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x0000000080a00000-0x00000000829fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ff08000-0x829fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x82a00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[    0.000000] e820: [mem 0x82a00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff8940fb200000 s106328 r8192 d28840 u262144
[    0.000000] pcpu-alloc: s106328 r8192 d28840 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2045372
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=UUID=2c366ba5-ae1a-48ef-895d-745c6adb516c rw rootflags=subvol=arch initrd=../initramfs-linux.img
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8091504K/8311448K available (6539K kernel code, 1124K rwdata, 2048K rodata, 1324K init, 912K bss, 219944K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] ftrace: allocating 27933 entries in 110 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:8448 nr_irqs:488 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.003333] tsc: Detected 2594.036 MHz processor
[    0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.24 BogoMIPS (lpj=8646786)
[    0.003333] pid_max: default: 32768 minimum: 301
[    0.003333] ACPI: Core revision 20170303
[    0.008409] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.008432] Security Framework initialized
[    0.008433] Yama: becoming mindful.
[    0.008772] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.010616] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.011454] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.011460] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.011668] CPU: Physical Processor ID: 0
[    0.011669] CPU: Processor Core ID: 0
[    0.011676] mce: CPU supports 9 MCE banks
[    0.011691] CPU0: Thermal monitoring enabled (TM1)
[    0.011702] process: using mwait in idle threads
[    0.011705] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.011705] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.011819] Freeing SMP alternatives memory: 24K
[    0.012334] smpboot: Max logical packages: 2
[    0.012339] DMAR: Host address width 36
[    0.012340] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.012347] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.012348] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.012351] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.012352] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.012353] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.012354] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.012625] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.012626] x2apic enabled
[    0.012630] Switched APIC routing to cluster x2apic.
[    0.013081] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.046097] TSC deadline timer enabled
[    0.046100] smpboot: CPU0: Intel(R) Core(TM) i7-3720QM CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.050023] mce: [Hardware Error]: Machine check events logged
[    0.050026] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 7: ee2000000003110a
[    0.050036] mce: [Hardware Error]: TSC 0 ADDR feffff40 MISC 1040000086 
[    0.050045] mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1503119293 SOCKET 0 APIC 0 microcode 1b
[    0.050051] mce: [Hardware Error]: Machine check events logged
[    0.050053] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 8: ee2000000003110a
[    0.050058] mce: [Hardware Error]: TSC 0 ADDR feffff00 MISC 1040000086 
[    0.050079] mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1503119293 SOCKET 0 APIC 0 microcode 1b
[    0.056680] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.056719] ... version:                3
[    0.056720] ... bit width:              48
[    0.056721] ... generic registers:      4
[    0.056723] ... value mask:             0000ffffffffffff
[    0.056724] ... max period:             00007fffffffffff
[    0.056725] ... fixed-purpose events:   3
[    0.056726] ... event mask:             000000070000000f
[    0.076835] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.083338] smp: Bringing up secondary CPUs ...
[    0.110023] x86: Booting SMP configuration:
[    0.110025] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.855358] smp: Brought up 1 node, 8 CPUs
[    0.855358] smpboot: Total of 8 processors activated (41532.74 BogoMIPS)
[    0.856803] sched_clock: Marking stable (856666581, 0)->(858578983, -1912402)
[    0.857091] devtmpfs: initialized
[    0.857134] x86/mm: Memory block size: 128MB
[    0.859360] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.859370] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.859428] pinctrl core: initialized pinctrl subsystem
[    0.859461] RTC time:  5:08:14, date: 08/19/17
[    0.859537] NET: Registered protocol family 16
[    0.859675] cpuidle: using governor ladder
[    0.859679] cpuidle: using governor menu
[    0.859680] PCCT header not found.
[    0.859698] ACPI: bus type PCI registered
[    0.859700] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.859747] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.859749] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.859757] PCI: Using configuration type 1 for base access
[    0.859804] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.860547] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.860762] ACPI: Added _OSI(Module Device)
[    0.860763] ACPI: Added _OSI(Processor Device)
[    0.860764] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.860764] ACPI: Added _OSI(Processor Aggregator Device)
[    0.860870] ACPI: Executed 1 blocks of module-level executable AML code
[    0.862648] ACPI Error: No handler for Region [ECRM] (ffff8940f2916c60) [EmbeddedControl] (20170303/evregion-166)
[    0.862656] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20170303/exfldio-299)
[    0.862661] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0._REG] (Node ffff8940f2918938), AE_NOT_EXIST (20170303/psparse-543)
[    0.863174] ACPI : EC: EC started
[    0.863175] ACPI : EC: interrupt blocked
[    0.875207] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.875209] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.875210] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.875210] ACPI: Interpreter enabled
[    0.875225] ACPI: (supports S0 S3 S4 S5)
[    0.875226] ACPI: Using IOAPIC for interrupt routing
[    0.875240] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.878037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.878041] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.878079] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.878087] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.878127] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c69ff])
[    0.878251] PCI host bridge to bus 0000:00
[    0.878253] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.878254] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.878255] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.878256] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.878257] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.878258] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.878259] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.878260] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.878261] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.878262] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.878263] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.878264] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.878265] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.878266] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.878267] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.878268] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xf7ffffff window]
[    0.878269] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.878270] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.878277] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.878352] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.878362] pci 0000:00:02.0: reg 0x10: [mem 0xf1400000-0xf17fffff 64bit]
[    0.878367] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.878372] pci 0000:00:02.0: reg 0x20: [io  0x2000-0x203f]
[    0.878436] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[    0.878444] pci 0000:00:04.0: reg 0x10: [mem 0xf1930000-0xf1937fff 64bit]
[    0.878530] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.878549] pci 0000:00:14.0: reg 0x10: [mem 0xf1920000-0xf192ffff 64bit]
[    0.878618] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.878650] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.878682] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.878702] pci 0000:00:16.0: reg 0x10: [mem 0xf1940000-0xf194000f 64bit]
[    0.878776] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.878838] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.878853] pci 0000:00:19.0: reg 0x10: [mem 0xf1900000-0xf191ffff]
[    0.878861] pci 0000:00:19.0: reg 0x14: [mem 0xf193c000-0xf193cfff]
[    0.878869] pci 0000:00:19.0: reg 0x18: [io  0x2040-0x205f]
[    0.878929] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.878985] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.879002] pci 0000:00:1a.0: reg 0x10: [mem 0xf193e000-0xf193e3ff]
[    0.879085] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.879117] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.879147] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.879165] pci 0000:00:1b.0: reg 0x10: [mem 0xf1938000-0xf193bfff 64bit]
[    0.879238] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.879274] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.879303] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.879374] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.879434] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.879503] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.879563] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.879639] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.879700] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[    0.879774] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.879839] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.879856] pci 0000:00:1d.0: reg 0x10: [mem 0xf193f000-0xf193f3ff]
[    0.879940] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.879971] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.879999] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[    0.880157] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.880174] pci 0000:00:1f.2: reg 0x10: [io  0x2080-0x2087]
[    0.880182] pci 0000:00:1f.2: reg 0x14: [io  0x2090-0x2093]
[    0.880190] pci 0000:00:1f.2: reg 0x18: [io  0x2088-0x208f]
[    0.880197] pci 0000:00:1f.2: reg 0x1c: [io  0x2094-0x2097]
[    0.880205] pci 0000:00:1f.2: reg 0x20: [io  0x2060-0x207f]
[    0.880213] pci 0000:00:1f.2: reg 0x24: [mem 0xf193d000-0xf193d7ff]
[    0.880257] pci 0000:00:1f.2: PME# supported from D3hot
[    0.880348] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.880396] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.880480] pci 0000:03:00.0: [197b:2392] type 00 class 0x088000
[    0.880515] pci 0000:03:00.0: reg 0x10: [mem 0xf0810000-0xf08100ff]
[    0.880621] pci 0000:03:00.0: reg 0x30: [mem 0xf0800000-0xf080ffff pref]
[    0.880635] pci 0000:03:00.0: Enabling fixed DMA alias to 00.1
[    0.880794] pci 0000:03:00.2: [197b:2391] type 00 class 0x080501
[    0.880828] pci 0000:03:00.2: reg 0x10: [mem 0xf0811000-0xf08110ff]
[    0.881105] pci 0000:03:00.3: [197b:2393] type 00 class 0x088000
[    0.881140] pci 0000:03:00.3: reg 0x10: [mem 0xf0812000-0xf08120ff]
[    0.881400] pci 0000:03:00.4: [197b:2394] type 00 class 0x088000
[    0.881436] pci 0000:03:00.4: reg 0x10: [mem 0xf0813000-0xf08130ff]
[    0.890071] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.890078] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    0.890084] pci 0000:00:1c.2:   bridge window [mem 0xf0000000-0xf08fffff]
[    0.890095] pci 0000:00:1c.2:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.890180] pci 0000:04:00.0: [168c:0030] type 00 class 0x028000
[    0.890226] pci 0000:04:00.0: reg 0x10: [mem 0xf1800000-0xf181ffff 64bit]
[    0.890310] pci 0000:04:00.0: reg 0x30: [mem 0xf1820000-0xf182ffff pref]
[    0.890431] pci 0000:04:00.0: supports D1
[    0.890432] pci 0000:04:00.0: PME# supported from D0 D1 D3hot
[    0.900079] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.900090] pci 0000:00:1c.3:   bridge window [mem 0xf1800000-0xf18fffff]
[    0.900217] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.900257] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.900295] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.900333] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.900370] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.900407] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.900444] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.900481] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.900800] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.900884] ACPI : EC: interrupt unblocked
[    0.900890] ACPI : EC: event unblocked
[    0.900897] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.900898] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.900961] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.900962] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.900965] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.900966] vgaarb: loaded
[    0.901000] EDAC MC: Ver: 3.0.0
[    0.901119] PCI: Using ACPI for IRQ routing
[    0.902567] PCI: pci_cache_line_size set to 64 bytes
[    0.902650] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.902651] e820: reserve RAM buffer [mem 0x7ff08000-0x7fffffff]
[    0.902652] e820: reserve RAM buffer [mem 0x27b600000-0x27bffffff]
[    0.902723] NetLabel: Initializing
[    0.902723] NetLabel:  domain hash size = 128
[    0.902724] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.902736] NetLabel:  unlabeled traffic allowed by default
[    0.902780] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.902785] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.904810] clocksource: Switched to clocksource hpet
[    0.912762] VFS: Disk quotas dquot_6.6.0
[    0.912779] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.912845] pnp: PnP ACPI init
[    0.912924] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.912926] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.912927] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.912928] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.912929] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.912930] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.912932] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.912933] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.912934] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[    0.912935] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[    0.912938] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.913202] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.913205] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.913235] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.913236] system 00:02: [io  0x0480-0x04bf] has been reserved
[    0.913238] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.913253] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.913276] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.913296] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.913310] pnp: PnP ACPI: found 6 devices
[    0.919350] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.919389] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.919401] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.919412] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.919415] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    0.919420] pci 0000:00:1c.2:   bridge window [mem 0xf0000000-0xf08fffff]
[    0.919424] pci 0000:00:1c.2:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.919430] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.919435] pci 0000:00:1c.3:   bridge window [mem 0xf1800000-0xf18fffff]
[    0.919444] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.919445] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.919446] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.919447] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.919448] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[    0.919449] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[    0.919450] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.919451] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.919452] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.919453] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.919454] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.919455] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.919456] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.919457] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[    0.919458] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.919459] pci_bus 0000:00: resource 19 [mem 0x82a00000-0xf7ffffff window]
[    0.919460] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[    0.919461] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.919462] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf08fffff]
[    0.919463] pci_bus 0000:03: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.919465] pci_bus 0000:04: resource 1 [mem 0xf1800000-0xf18fffff]
[    0.919526] NET: Registered protocol family 2
[    0.919655] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.919763] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.919881] TCP: Hash tables configured (established 65536 bind 65536)
[    0.919906] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.919927] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.919975] NET: Registered protocol family 1
[    0.919985] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.920477] PCI: CLS 64 bytes, default 64
[    0.920510] Unpacking initramfs...
[    1.031588] Freeing initrd memory: 7896K
[    1.031617] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.031620] software IO TLB [mem 0x7b752000-0x7f752000] (64MB) mapped at [ffff893efb752000-ffff893eff751fff]
[    1.031930] Scanning for low memory corruption every 60 seconds
[    1.032431] Initialise system trusted keyrings
[    1.032439] Key type blacklist registered
[    1.032483] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    1.033342] zbud: loaded
[    1.033989] Key type asymmetric registered
[    1.033999] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.034031] io scheduler noop registered
[    1.034031] io scheduler deadline registered
[    1.034051] io scheduler cfq registered (default)
[    1.034052] io scheduler mq-deadline registered
[    1.034053] io scheduler kyber registered
[    1.034070] io scheduler bfq registered
[    1.034767] pcieport 0000:00:1c.0: Signaling PME with IRQ 26
[    1.034786] pcieport 0000:00:1c.1: Signaling PME with IRQ 27
[    1.034803] pcieport 0000:00:1c.2: Signaling PME with IRQ 28
[    1.034831] pcieport 0000:00:1c.3: Signaling PME with IRQ 29
[    1.034850] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.034885] intel_idle: MWAIT substates: 0x21120
[    1.034886] intel_idle: v0.4.1 model 0x3A
[    1.035137] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.046057] GHES: HEST is not enabled!
[    1.046167] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.046783] Linux agpgart interface v0.103
[    1.047307] rtc_cmos 00:03: RTC can wake from S4
[    1.047442] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.047471] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.047479] intel_pstate: Intel P-state driver initializing
[    1.047811] ledtrig-cpu: registered to indicate activity on CPUs
[    1.047854] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[    1.048208] NET: Registered protocol family 10
[    1.054053] Segment Routing with IPv6
[    1.054093] NET: Registered protocol family 17
[    1.054892] RAS: Correctable Errors collector initialized.
[    1.054941] microcode: sig=0x306a9, pf=0x10, revision=0x1b
[    1.055152] microcode: Microcode Update Driver: v2.2.
[    1.055470] registered taskstats version 1
[    1.055486] Loading compiled-in X.509 certificates
[    1.055519] zswap: loaded using pool lzo/zbud
[    1.056229]   Magic number: 13:33:113
[    1.056364] rtc_cmos 00:03: setting system clock to 2017-08-19 05:08:14 UTC (1503119294)
[    1.057486] PM: Hibernation image not present or could not be loaded.
[    1.059808] Freeing unused kernel memory: 1324K
[    1.059810] Write protecting the kernel read-only data: 10240k
[    1.060514] Freeing unused kernel memory: 1640K
[    1.082283] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input0
[    1.082303] ACPI: Lid Switch [LID]
[    1.082339] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.082341] ACPI: Power Button [PWRF]
[    1.082598] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.083678] acpi device:03: registered as cooling_device8
[    1.083718] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[    1.092487] [drm] Memory usable by graphics device = 2048M
[    1.092488] [drm] Replacing VGA console driver
[    1.092532] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.092532] [drm] Driver supports precise vblank timestamp query.
[    1.092535] i915 0000:00:02.0: Invalid PCI ROM data signature: expecting 0x52494350, got 0xe935aa55
[    1.092540] [drm] Failed to find VBIOS tables (VBT)
[    1.092714] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.135596] [drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on minor 0
[    1.167966] fbcon: inteldrmfb (fb0) is primary device
[    1.961751] Console: switching to colour frame buffer device 170x48
[    1.983133] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.041449] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.043282] i8042: Detected active multiplexing controller, rev 1.1
[    2.043993] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.044038] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.044069] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.044095] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.044112] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.045669] ACPI: bus type USB registered
[    2.045685] usbcore: registered new interface driver usbfs
[    2.045691] usbcore: registered new interface driver hub
[    2.045718] usbcore: registered new device driver usb
[    2.046570] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.047238] ehci-pci: EHCI PCI platform driver
[    2.047401] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    2.047408] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.047420] ehci-pci 0000:00:1a.0: debug port 2
[    2.047734] SCSI subsystem initialized
[    2.047903] sdhci: Secure Digital Host Controller Interface driver
[    2.047904] sdhci: Copyright(c) Pierre Ossman
[    2.048227] sdhci-pci 0000:03:00.0: SDHCI controller found [197b:2392] (rev 30)
[    2.048670] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
[    2.049406] sdhci-pci 0000:03:00.2: SDHCI controller found [197b:2391] (rev 30)
[    2.049417] libata version 3.00 loaded.
[    2.049617] sdhci-pci 0000:03:00.2: Refusing to bind to secondary interface.
[    2.051339] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    2.051351] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf193e000
[    2.051521] tsc: Refined TSC clocksource calibration: 2594.109 MHz
[    2.051527] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647f0d2d3, max_idle_ns: 440795228342 ns
[    2.061526] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.061673] hub 1-0:1.0: USB hub found
[    2.061678] hub 1-0:1.0: 3 ports detected
[    2.061936] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    2.061941] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.061953] ehci-pci 0000:00:1d.0: debug port 2
[    2.065867] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    2.065886] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf193f000
[    2.078257] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.078643] hub 2-0:1.0: USB hub found
[    2.078656] hub 2-0:1.0: 3 ports detected
[    2.079181] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.079200] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    2.080307] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930
[    2.080314] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    2.080556] hub 3-0:1.0: USB hub found
[    2.080568] hub 3-0:1.0: 4 ports detected
[    2.080695] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.080698] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    2.080838] hub 4-0:1.0: USB hub found
[    2.080850] hub 4-0:1.0: 4 ports detected
[    2.081018] ahci 0000:00:1f.2: version 3.0
[    2.081236] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    2.083223] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.091380] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x33 impl SATA mode
[    2.091385] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    2.092612] scsi host0: ahci
[    2.093047] scsi host1: ahci
[    2.093322] scsi host2: ahci
[    2.093709] scsi host3: ahci
[    2.093988] scsi host4: ahci
[    2.094298] scsi host5: ahci
[    2.094420] ata1: SATA max UDMA/133 abar m2048@0xf193d000 port 0xf193d100 irq 32
[    2.094423] ata2: SATA max UDMA/133 abar m2048@0xf193d000 port 0xf193d180 irq 32
[    2.094425] ata3: DUMMY
[    2.094426] ata4: DUMMY
[    2.094429] ata5: SATA max UDMA/133 abar m2048@0xf193d000 port 0xf193d300 irq 32
[    2.094432] ata6: SATA max UDMA/133 abar m2048@0xf193d000 port 0xf193d380 irq 32
[    2.381575] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.398236] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.408812] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.409224] ata1.00: supports DRM functions and may not be fully accessible
[    2.410116] ata1.00: ATA-10: Crucial_CT1024MX200SSD1, MU04, max UDMA/133
[    2.410120] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.411324] ata1.00: supports DRM functions and may not be fully accessible
[    2.413697] ata1.00: configured for UDMA/133
[    2.414220] scsi 0:0:0:0: Direct-Access     ATA      Crucial_CT1024MX MU04 PQ: 0 ANSI: 5
[    2.519035] hub 1-1:1.0: USB hub found
[    2.519210] hub 1-1:1.0: 6 ports detected
[    2.535782] hub 2-1:1.0: USB hub found
[    2.535958] hub 2-1:1.0: 8 ports detected
[    2.762584] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.766777] ata2.00: ATAPI: hp       CDDVDW SU-208BB, HH02, max UDMA/100
[    2.773247] ata2.00: configured for UDMA/100
[    2.787362] scsi 1:0:0:0: CD-ROM            hp       CDDVDW SU-208BB  HH02 PQ: 0 ANSI: 5
[    2.798304] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[    2.814967] usb 2-1.6: new full-speed USB device number 3 using ehci-pci
[    2.968312] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[    2.991593] usb 2-1.8: new full-speed USB device number 4 using ehci-pci
[    3.065216] clocksource: Switched to clocksource tsc
[    3.122306] ata5: SATA link down (SStatus 0 SControl 300)
[    3.435875] ata6: SATA link down (SStatus 0 SControl 300)
[    3.443472] ata1.00: Enabling discard_zeroes_data
[    3.443749] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.443754] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    3.443796] sd 0:0:0:0: [sda] Write Protect is off
[    3.443800] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.443858] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.444089] ata1.00: Enabling discard_zeroes_data
[    3.445586]  sda: sda1 sda2 sda3 sda4 sda5
[    3.446008] ata1.00: Enabling discard_zeroes_data
[    3.446139] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.454615] random: fast init done
[    3.466022] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.466024] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.466143] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.528220] raid6: sse2x1   gen() 10301 MB/s
[    3.584889] raid6: sse2x1   xor()  7059 MB/s
[    3.641557] raid6: sse2x2   gen() 12791 MB/s
[    3.698220] raid6: sse2x2   xor()  8645 MB/s
[    3.754889] raid6: sse2x4   gen() 15485 MB/s
[    3.811555] raid6: sse2x4   xor() 10580 MB/s
[    3.811555] raid6: using algorithm sse2x4 gen() 15485 MB/s
[    3.811556] raid6: .... xor() 10580 MB/s, rmw enabled
[    3.811556] raid6: using ssse3x2 recovery algorithm
[    3.811793] xor: automatically using best checksumming function   avx       
[    3.816166] Btrfs loaded, crc32c=crc32c-intel
[    3.816632] BTRFS: device fsid 2c366ba5-ae1a-48ef-895d-745c6adb516c devid 1 transid 8279 /dev/sda2
[    3.830078] BTRFS info (device sda2): disk space caching is enabled
[    3.830079] BTRFS info (device sda2): has skinny extents
[    3.836230] BTRFS info (device sda2): detected SSD devices, enabling SSD mode
[    3.971726] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.974637] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    3.974810] systemd[1]: Detected architecture x86-64.
[    3.975495] systemd[1]: Set hostname to <mylaptop>.
[    4.022957] systemd[1]: Created slice System Slice.
[    4.023388] systemd[1]: Created slice system-getty.slice.
[    4.023744] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    4.024644] systemd[1]: Mounting Kernel Debug File System...
[    4.025650] systemd[1]: Mounting Huge Pages File System...
[    4.025854] systemd[1]: Created slice User and Session Slice.
[    4.025993] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    4.044523] BTRFS info (device sda2): use lzo compression
[    4.044525] BTRFS info (device sda2): turning on discard
[    4.044527] BTRFS info (device sda2): disk space caching is enabled
[    4.094018] pps_core: LinuxPPS API ver. 1 registered
[    4.094020] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    4.094801] PTP clock support registered
[    4.099194] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    4.099196] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    4.099282] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    4.109460] ACPI: AC Adapter [AC] (off-line)
[    4.114315] media: Linux media interface: v0.10
[    4.147545] ACPI: Battery Slot [BAT0] (battery present)
[    4.147613] ACPI: Battery Slot [BAT1] (battery absent)
[    4.162006] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    4.187643] Linux video capture interface: v2.00
[    4.191793] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    4.191795] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    4.191795] RAPL PMU: hw unit of domain package 2^-16 Joules
[    4.191796] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    4.196467] Bluetooth: Core ver 2.22
[    4.196482] NET: Registered protocol family 31
[    4.196483] Bluetooth: HCI device and connection manager initialized
[    4.196485] Bluetooth: HCI socket layer initialized
[    4.196488] Bluetooth: L2CAP socket layer initialized
[    4.196497] Bluetooth: SCO socket layer initialized
[    4.199266] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (05c8:0341)
[    4.204247] AVX version of gcm_enc/dec engaged.
[    4.204248] AES CTR mode by8 optimization enabled
[    4.206427] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    4.208155] usbcore: registered new interface driver btusb
[    4.208985] Adding 8190972k swap on /dev/sda5.  Priority:-1 extents:1 across:8190972k SSFS
[    4.216485] uvcvideo 1-1.3:1.0: Entity type for entity Extension 4 was not initialized!
[    4.216486] uvcvideo 1-1.3:1.0: Entity type for entity Extension 3 was not initialized!
[    4.216487] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized!
[    4.216488] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized!
[    4.216537] input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10
[    4.216579] usbcore: registered new interface driver uvcvideo
[    4.216579] USB Video Class driver (1.1.1)
[    4.242005] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[    4.243994] EXT4-fs (sda1): mounted filesystem without journal. Opts: block_validity,barrier,user_xattr,acl,stripe=4
[    4.248846] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: discard,data=ordered
[    4.261866] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: discard,data=ordered
[    4.269393] intel_rapl: Found RAPL domain package
[    4.269393] intel_rapl: Found RAPL domain core
[    4.269394] intel_rapl: Found RAPL domain uncore
[    4.274413] systemd-journald[267]: Received request to flush runtime journal from PID 1
[    4.314088] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d4:c9:ef:e7:bc:1c
[    4.314089] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    4.314120] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[    4.314212] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20170303/utaddress-247)
[    4.314217] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.314220] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170303/utaddress-247)
[    4.314222] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.314223] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170303/utaddress-247)
[    4.314225] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.314226] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170303/utaddress-247)
[    4.314228] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.314229] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    4.314268] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.316178] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    4.317398] iTCO_vendor_support: vendor-support=0
[    4.318007] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    4.318034] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[    4.318107] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    4.327352] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
[    4.327354] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[    4.327355] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[    4.327356] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[    4.327356] snd_hda_codec_idt hdaudioC0D0:    inputs:
[    4.327358] snd_hda_codec_idt hdaudioC0D0:      Mic=0xc
[    4.327359] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0x11
[    4.327359] snd_hda_codec_idt hdaudioC0D0:      Line=0xf
[    4.362381] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops vgt_balloon_space [i915])
[    4.367370] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    4.368353] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    4.368388] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    4.368422] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    4.368455] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    4.368489] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    4.368540] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    4.374615] ath: phy0: ASPM enabled: 0x43
[    4.374618] ath: EEPROM regdomain: 0x6a
[    4.374619] ath: EEPROM indicates we should expect a direct regpair map
[    4.374621] ath: Country alpha2 being used: 00
[    4.374621] ath: Regpair used: 0x6a
[    4.377955] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    4.378289] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffb04f81720000, irq=19
[    4.379367] ath9k 0000:04:00.0 wlp4s0: renamed from wlan0
[    4.826324] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    5.071945] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    5.077936] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[    5.088167] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[    5.103257] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[    5.181078] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[    5.306992] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input9
[    5.311643] mousedev: PS/2 mouse device common for all mice
[    6.078119] psmouse serio4: synaptics: queried max coordinates: x [..5814], y [..5124]
[    6.143085] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xe40000/0xa0400/0x0, board id: 0, fw id: 768486
[    6.184571] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input20
[    6.923681] random: crng init done
[    8.888607] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   12.611609] wlp4s0: authenticate with 8c:a6:df:44:5d:fb
[   12.621037] wlp4s0: send auth to 8c:a6:df:44:5d:fb (try 1/3)
[   12.623220] wlp4s0: authenticated
[   12.628481] wlp4s0: associate with 8c:a6:df:44:5d:fb (try 1/3)
[   12.638586] wlp4s0: RX AssocResp from 8c:a6:df:44:5d:fb (capab=0x431 status=0 aid=4)
[   12.638732] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[   12.638765] wlp4s0: associated
[   23.462867] wireguard: loading out-of-tree module taints kernel.
[   23.463523] wireguard: WireGuard 0.0.20170810 loaded. See www.wireguard.com for information.
[   23.463524] wireguard: Copyright (C) 2015-2017 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.