

coreboot-4.0-8032-gb10db43 Thu Jan 29 18:47:21 CST 2015 starting...
Disabling Watchdog reboot... done.
SMBus controller enabled.
Setting up static northbridge registers... done.
Initializing Graphics...
Back from haswell_early_initialization()
CPU id(40651) ucode:0000001c Intel(R) Celeron(R) 2955U @ 1.40GHz
AES NOT supported, TXT NOT supported, VT supported
PCH type: LP Mainstream, device id: 9c45, rev id 4
Starting UEFI PEI System Agent
find_current_mrc_cache_local: picked entry 0 from cache block
prepare_mrc_cache: at fffe0010, size fe0 checksum 89b1
System Agent: Starting up...
System Agent: Initializing PCH
install_ppi: overwrite GUID {ed097352-9041-445a-80b6-b29d509e8845}
install_ppi: overwrite GUID {908c7f8b-5c48-47fb-8357-f5fd4e235276}
System Agent: Initializing PCH (SMBUS)
System Agent: Initializing PCH (USB)
System Agent: Initializing PCH (SA Init)
System Agent: Initializing PCH (Me UMA)
System Agent: Initializing Memory
System Agent: Done.
Sanity checking heap.
System Agent Version 1.6.1 Build 2
memcfg DDR3 clock 1600 MHz
memcfg channel assignment: A: 0, B  1, C  2
memcfg channel[0] config (00780008):
   ECC inactive
   enhanced interleave mode on
   rank interleave on
   DIMMA 2048 MB width x16 single rank, selected
   DIMMB 0 MB width x16 single rank
memcfg channel[1] config (00600008):
   ECC inactive
   enhanced interleave mode on
   rank interleave on
   DIMMA 2048 MB width x8 or x32 single rank, selected
   DIMMB 0 MB width x8 or x32 single rank
ME: FW Partition Table      : OK
ME: Bringup Loader Failure  : NO
ME: Firmware Init Complete  : NO
ME: Manufacturing Mode      : NO
ME: Boot Options Present    : NO
ME: Update In Progress      : NO
ME: Current Working State   : Normal
ME: Current Operation State : Bring up
ME: Current Operation Mode  : Normal
ME: Error Code              : No Error
ME: Progress Phase          : BUP Phase
ME: Power Management Event  : Pseudo-global reset
ME: Progress Phase State    : 0x2b
CBMEM: root @ 7f7ff000 254 entries.
Relocate MRC DATA from ff7d0320 to 7f7dc000 (4064 bytes)
Trying CBFS ramstage loader.
Decompressing stage fallback/ramstage @ 0x7f790fc0 (278648 bytes)
Loading module at 7f791000 with entry 7f791000. filesize: 0x32430 memsize: 0x44038
Processing 2795 relocs. Offset value of 0x7f791000
coreboot-4.0-8032-gb10db43 Thu Jan 29 18:47:21 CST 2015 booting...
clocks_per_usec: 1400
CBMEM: recovering 9/254 entries from root @ 7f7ff000
Moving GDT to 7f749000...ok
BS: BS_PRE_DEVICE times (us): entry 10 run 4 exit 4
BS: BS_DEV_INIT_CHIPS times (us): entry 3 run 5 exit 3
Enumerating buses...
CPU_CLUSTER: 0 enabled
DOMAIN: 0000 enabled
PCI: pci_scan_bus for bus 00
Normal boot.
PCI: 00:00.0 [8086/0a04] enabled
PCI: 00:02.0 [8086/0a06] enabled
PCI: 00:03.0 [8086/0a0c] enabled
PCI: 00:13.0: Disabling device
PCI: 00:13.0 [8086/9c36] disabled No operations
PCI: 00:14.0 [8086/9c31] enabled
PCI: 00:15.0: Disabling device
IOBP: set 0xce00aa07 to 0x00000100
PCI: 00:15.1: Disabling device
IOBP: set 0xce00aa47 to 0x00000100
PCI: 00:15.2: Disabling device
IOBP: set 0xce00aa87 to 0x00000100
PCI: 00:15.3: Disabling device
IOBP: set 0xce00aac7 to 0x00000100
PCI: 00:15.4: Disabling device
IOBP: set 0xce00ab07 to 0x00000100
PCI: 00:15.5: Disabling device
IOBP: set 0xce00ab47 to 0x00000100
PCI: 00:15.6: Disabling device
IOBP: set 0xce00ab87 to 0x00000100
PCI: 00:16.0 [8086/9c3a] enabled
PCI: 00:16.1: Disabling device
PCI: 00:16.1 [8086/9c3b] disabled No operations
PCI: 00:16.2: Disabling device
PCI: 00:16.3: Disabling device
PCI: 00:17.0: Disabling device
IOBP: set 0xce00ae07 to 0x00000100
PCI: 00:19.0: Disabling device
PCI: 00:1b.0 [8086/9c20] enabled
PCI: 00:1c.0 [8086/9c10] disabled
PCI: 00:1c.1 [8086/9c12] disabled
PCIe Root Port 3 ASPM is disabled
PCI: 00:1c.2 [8086/9c14] enabled
PCIe Root Port 4 ASPM is disabled
PCI: 00:1c.3 [8086/9c16] enabled
PCIe Root Port 5 ASPM is enabled
IOBP: set 0xe9000c40 to 0x05050e00
IOBP: set 0xe9000e40 to 0x05050e00
IOBP: set 0xe9001040 to 0x05050e00
IOBP: set 0xe9001240 to 0x05050e00
PCI: 00:1c.4 [8086/9c18] enabled
PCI: 00:1c.0: Disabling device
PCI: 00:1c.1: Disabling device
PCI: 00:1c.5: Disabling device
PCH: PCIe map 1c.2 -> 1c.0
PCH: PCIe map 1c.3 -> 1c.1
PCH: PCIe map 1c.4 -> 1c.2
PCH: PCIe map 1c.0 -> 1c.3
PCH: PCIe map 1c.1 -> 1c.4
PCI: 00:1c.5 [8086/9c1a] disabled
PCI: 00:1d.0 [8086/9c26] enabled
PCI: 00:1e.0: Disabling device
PCI: 00:1f.0 [8086/9c45] enabled
PCI: 00:1f.2 [8086/9c03] enabled
PCI: 00:1f.3 [8086/9c22] enabled
PCI: 00:1f.6 [8086/9c24] enabled
PCI: pci_scan_bus for bus 01
PCI: 01:00.0 [10ec/8168] enabled
PCI: pci_scan_bus returning with max=001
Enabling Common Clock Configuration
ASPM: Enabled L1
PCI: pci_scan_bus for bus 02
PCI: 02:00.0 [168c/0034] enabled
PCI: pci_scan_bus returning with max=002
Enabling Common Clock Configuration
ASPM: Enabled L0s and L1
PCI: pci_scan_bus for bus 03
PCI: pci_scan_bus returning with max=003
PNP: 002e.0 disabled
PNP: 002e.1 enabled
PNP: 002e.4 enabled
PNP: 002e.7 enabled
PNP: 002e.5 disabled
PNP: 002e.6 disabled
PNP: 002e.a disabled
PCI: pci_scan_bus returning with max=003
done
BS: BS_DEV_ENUMERATE times (us): entry 4 run 2564 exit 4
found VGA at PCI: 00:02.0
Setting up VGA for PCI: 00:02.0
Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Allocating resources...
Reading resources...
APIC: 00 missing read_resources
mc_add_fixed_mmio_resources: Adding PCIEXBAR @ 60 0xf0000000-0xf3ffffff.
mc_add_fixed_mmio_resources: Adding MCHBAR @ 48 0xfed10000-0xfed17fff.
mc_add_fixed_mmio_resources: Adding DMIBAR @ 68 0xfed18000-0xfed18fff.
mc_add_fixed_mmio_resources: Adding EPBAR @ 40 0xfed19000-0xfed19fff.
mc_add_fixed_mmio_resources: Adding GDXCBAR @ 5420 0xfed84000-0xfed84fff.
MC MAP: TOM: 0x100000000
MC MAP: TOUUD: 0x17ce00000
MC MAP: MESEG_BASE: 0xff000000
MC MAP: MESEG_LIMIT: 0x7fff0fffff
MC MAP: REMAP_BASE: 0x100000000
MC MAP: REMAP_LIMIT: 0x17cdfffff
MC MAP: TOLUD: 0x82200000
MC MAP: BGSM: 0x80000000
MC MAP: BDSM: 0x80200000
MC MAP: TESGMB: 0x7f800000
MC MAP: GGC: 0x209
Done reading resources.
skipping PNP: 002e.4@f2 fixed resource, size=0!
Setting resources...
PCI: 00:02.0 10 <- [0x00e0000000 - 0x00e03fffff] size 0x00400000 gran 0x16 mem64
PCI: 00:02.0 18 <- [0x00d0000000 - 0x00dfffffff] size 0x10000000 gran 0x1c prefmem64
PCI: 00:02.0 20 <- [0x0000003000 - 0x000000303f] size 0x00000040 gran 0x06 io
PCI: 00:03.0 10 <- [0x00e0710000 - 0x00e0713fff] size 0x00004000 gran 0x0e mem64
PCI: 00:14.0 10 <- [0x00e0700000 - 0x00e070ffff] size 0x00010000 gran 0x10 mem64
PCI: 00:16.0 10 <- [0x00e0719d00 - 0x00e0719d1f] size 0x00000020 gran 0x05 mem64
PCI: 00:1b.0 10 <- [0x00e0714000 - 0x00e0717fff] size 0x00004000 gran 0x0e mem64
PCI: 00:1c.0 1c <- [0x0000002000 - 0x0000002fff] size 0x00001000 gran 0x0c bus 01 io
PCI: 00:1c.0 24 <- [0x00e0400000 - 0x00e04fffff] size 0x00100000 gran 0x14 bus 01 prefmem
PCI: 00:1c.0 20 <- [0x00e0500000 - 0x00e05fffff] size 0x00100000 gran 0x14 bus 01 mem
PCI: 01:00.0 10 <- [0x0000002000 - 0x00000020ff] size 0x00000100 gran 0x08 io
PCI: 01:00.0 18 <- [0x00e0500000 - 0x00e0500fff] size 0x00001000 gran 0x0c mem64
PCI: 01:00.0 20 <- [0x00e0400000 - 0x00e0403fff] size 0x00004000 gran 0x0e prefmem64
PCI: 00:1c.1 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 02 io
PCI: 00:1c.1 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 02 prefmem
PCI: 00:1c.1 20 <- [0x00e0600000 - 0x00e06fffff] size 0x00100000 gran 0x14 bus 02 mem
PCI: 02:00.0 10 <- [0x00e0600000 - 0x00e067ffff] size 0x00080000 gran 0x13 mem64
PCI: 02:00.0 30 <- [0x00e0680000 - 0x00e068ffff] size 0x00010000 gran 0x10 romem
PCI: 00:1c.2 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 03 io
PCI: 00:1c.2 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 03 prefmem
PCI: 00:1c.2 20 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 03 mem
PCI: 00:1d.0 10 <- [0x00e0719800 - 0x00e0719bff] size 0x00000400 gran 0x0a mem
PNP: 002e.1 60 <- [0x00000003f8 - 0x00000003ff] size 0x00000008 gran 0x03 io
PNP: 002e.1 70 <- [0x0000000004 - 0x0000000004] size 0x00000001 gran 0x00 irq
PNP: 002e.4 60 <- [0x0000000700 - 0x0000000707] size 0x00000008 gran 0x03 io
PNP: 002e.4 62 <- [0x0000000710 - 0x0000000713] size 0x00000004 gran 0x02 io
PNP: 002e.4 70 <- [0x0000000009 - 0x0000000009] size 0x00000001 gran 0x00 irq
PNP: 002e.4 f2 <- [0x0000000020 - 0x000000001f] size 0x00000000 gran 0x00 irq
PNP: 002e.4 f4 <- [0x0000000000 - 0x0000000000] size 0x00000001 gran 0x00 irq
PNP: 002e.4 fa <- [0x0000000012 - 0x0000000012] size 0x00000001 gran 0x00 irq
PNP: 002e.7 60 <- [0x0000000720 - 0x0000000720] size 0x00000001 gran 0x00 io
PNP: 002e.7 62 <- [0x0000000730 - 0x0000000737] size 0x00000008 gran 0x03 io
PCI: 00:1f.2 10 <- [0x0000003060 - 0x0000003067] size 0x00000008 gran 0x03 io
PCI: 00:1f.2 14 <- [0x0000003070 - 0x0000003073] size 0x00000004 gran 0x02 io
PCI: 00:1f.2 18 <- [0x0000003068 - 0x000000306f] size 0x00000008 gran 0x03 io
PCI: 00:1f.2 1c <- [0x0000003074 - 0x0000003077] size 0x00000004 gran 0x02 io
PCI: 00:1f.2 20 <- [0x0000003040 - 0x000000305f] size 0x00000020 gran 0x05 io
PCI: 00:1f.2 24 <- [0x00e0719000 - 0x00e07197ff] size 0x00000800 gran 0x0b mem
PCI: 00:1f.3 10 <- [0x00e0719c00 - 0x00e0719cff] size 0x00000100 gran 0x08 mem64
PCI: 00:1f.6 10 <- [0x00e0718000 - 0x00e0718fff] size 0x00001000 gran 0x0c mem64
Done setting resources.
Done allocating resources.
BS: BS_DEV_RESOURCES times (us): entry 4 run 2716 exit 3
Enabling resources...
PCI: 00:00.0 subsystem <- 1ae0/c000
PCI: 00:00.0 cmd <- 06
PCI: 00:02.0 subsystem <- 1ae0/c000
PCI: 00:02.0 cmd <- 03
PCI: 00:03.0 subsystem <- 1ae0/c000
PCI: 00:03.0 cmd <- 02
PCI: 00:14.0 subsystem <- 1ae0/c000
PCI: 00:14.0 cmd <- 102
PCI: 00:16.0 subsystem <- 1ae0/c000
PCI: 00:16.0 cmd <- 02
PCI: 00:1b.0 subsystem <- 1ae0/c000
PCI: 00:1b.0 cmd <- 102
PCI: 00:1c.0 bridge ctrl <- 0003
PCI: 00:1c.0 subsystem <- 1ae0/c000
PCI: 00:1c.0 cmd <- 07
PCI: 00:1c.1 bridge ctrl <- 0003
PCI: 00:1c.1 subsystem <- 1ae0/c000
PCI: 00:1c.1 cmd <- 06
PCI: 00:1c.2 bridge ctrl <- 0003
PCI: 00:1c.2 subsystem <- 1ae0/c000
PCI: 00:1c.2 cmd <- 00
PCI: 00:1d.0 subsystem <- 1ae0/c000
PCI: 00:1d.0 cmd <- 102
PCI: 00:1f.0 subsystem <- 1ae0/c000
PCI: 00:1f.0 cmd <- 107
PCI: 00:1f.2 subsystem <- 1ae0/c000
PCI: 00:1f.2 cmd <- 103
PCI: 00:1f.3 subsystem <- 1ae0/c000
PCI: 00:1f.3 cmd <- 103
PCI: 00:1f.6 subsystem <- 1ae0/c000
PCI: 00:1f.6 cmd <- 102
PCI: 01:00.0 cmd <- 03
PCI: 02:00.0 cmd <- 02
done.
BS: BS_DEV_ENABLE times (us): entry 4 run 407 exit 3
Initializing devices...
Root Device init
Located 'ethernet_mac' in VPD
Realtek NIC io_base = 0x2000
Programming MAC Address
Root Device init 1258 usecs
CPU_CLUSTER: 0 init
CPU has 2 cores, 2 threads enabled.
MTRR: Physical address space:
0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6
0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0
0x00000000000c0000 - 0x0000000080000000 size 0x7ff40000 type 6
0x0000000080000000 - 0x00000000d0000000 size 0x50000000 type 0
0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1
0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0
0x0000000100000000 - 0x000000017ce00000 size 0x7ce00000 type 6
MTRR: Fixed MSR 0x250 0x0606060606060606
MTRR: Fixed MSR 0x258 0x0606060606060606
MTRR: Fixed MSR 0x259 0x0000000000000000
MTRR: Fixed MSR 0x268 0x0606060606060606
MTRR: Fixed MSR 0x269 0x0606060606060606
MTRR: Fixed MSR 0x26a 0x0606060606060606
MTRR: Fixed MSR 0x26b 0x0606060606060606
MTRR: Fixed MSR 0x26c 0x0606060606060606
MTRR: Fixed MSR 0x26d 0x0606060606060606
MTRR: Fixed MSR 0x26e 0x0606060606060606
MTRR: Fixed MSR 0x26f 0x0606060606060606
MTRR: default type WB/UC MTRR counts: 4/3.
MTRR: UC selected as default type.
MTRR: 0 base 0x0000000000000000 mask 0x0000007f80000000 type 6
MTRR: 1 base 0x00000000d0000000 mask 0x0000007ff0000000 type 1
MTRR: 2 base 0x0000000100000000 mask 0x0000007f00000000 type 6

MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled

Initializing VR config.
PCODE: 24MHz BLCK calibration response: 0
PCODE: 24MHz BLCK calibration value: 0x85000000
PCH Power: PCODE Levels 0x3f1c40c1 0x0044c288
microcode: sig=0x40651 pf=0x40 revision=0x1c
Setting up SMI for CPU
Loading module at 00038000 with entry 00038000. filesize: 0x148 memsize: 0x148
Processing 10 relocs. Offset value of 0x00038000
SMM Module: stub loaded at 00038000. Will call 7f7ac8d0(7f7c86b8)
Installing SMM handler to 0x7f800000
Loading module at 7f810000 with entry 7f810305. filesize: 0x24b8 memsize: 0x64d8
Processing 71 relocs. Offset value of 0x7f810000
Loading module at 7f808000 with entry 7f808000. filesize: 0x148 memsize: 0x148
Processing 10 relocs. Offset value of 0x7f808000
SMM Module: placing jmp sequence at 7f807c00 rel16 0x03fd
SMM Module: stub loaded at 7f808000. Will call 7f810305(00000000)
Initializing Southbridge SMI...
In relocation handler: cpu 0
New SMBASE=0x7f800000 IEDBASE=0x7fc00000
Writing SMRR. base = 0x7f800006, mask=0xff800800
Relocation complete.
CPU: Intel(R) Celeron(R) 2955U @ 1.40GHz.
Loading module at 00030000 with entry 00030000. filesize: 0x138 memsize: 0x138
Processing 16 relocs. Offset value of 0x00030000
Attempting to start 1 APs
Waiting for 10ms after sending INIT.
Waiting for 1st SIPI to complete...done.
Waiting for 2nd SIPI to complete...done.
AP: slot 1 apic_id 2.
In relocation handler: cpu 1
New SMBASE=0x7f7ffc00 IEDBASE=0x7fc00000
Writing SMRR. base = 0x7f800006, mask=0xff800800
Relocation complete.
Initializing CPU #0
CPU: vendor Intel device 40651
CPU: family 06, model 45, stepping 01
Setting up local apic... apic_id: 0x00 done.
VMX is locked, so enable_vmx will do nothing
haswell: energy policy set to 6
haswell: frequency set to 1400
Turbo is unavailable
CPU #0 initialized
Initializing CPU #1
CPU: vendor Intel device 40651
CPU: family 06, model 45, stepping 01
Setting up local apic... apic_id: 0x02 done.
VMX is locked, so enable_vmx will do nothing
haswell: energy policy set to 6
haswell: frequency set to 1400
CPU #1 initialized
Enabling SMIs.
Locking SMM.
CPU_CLUSTER: 0 init 14154 usecs
PCI: 00:00.0 init
Set BIOS_RESET_CPL
CPU TDP: 15 Watts
PCI: 00:00.0 init 1014 usecs
PCI: 00:02.0 init
GT Power Management Init
GT Power Management Init (post VBIOS)
PCI: 00:02.0 init 133 usecs
PCI: 00:03.0 init
Mini-HD: base = e0710000
HDA: Initializing codec #0
HDA: codec viddid: 80862807
HDA: verb loaded.
PCI: 00:03.0 init 1361 usecs
PCI: 00:14.0 init
IOBP: set 0xe5004001 to 0x000000ce
PCI: 00:14.0 init 1096 usecs
PCI: 00:16.0 init
ME: FW Partition Table      : OK
ME: Bringup Loader Failure  : NO
ME: Firmware Init Complete  : NO
ME: Manufacturing Mode      : NO
ME: Boot Options Present    : NO
ME: Update In Progress      : NO
ME: Current Working State   : Normal
ME: Current Operation State : M0 with UMA
ME: Current Operation Mode  : Normal
ME: Error Code              : No Error
ME: Progress Phase          : uKernel Phase
ME: Power Management Event  : Pseudo-global reset
ME: Progress Phase State    : Unknown phase: 0x02 sate: 0x00
ME: BIOS path: Normal
ME: Extend SHA-256: 4822ca12b90cdd73e39caab8cdba777ac831451069f18f0be9b0340e9ad356e3
ME MBP: Header: items: 9, size dw: 37
ME: found version 9.5.13.1706
ME: Wake Event to ME Reset:      0 ms
ME: ME Reset to Platform Reset:  7 ms
ME: Platform Reset to CPU Reset: 43 ms
ME: ICC SET CLOCK ENABLES 0x01220000
PCI: 00:16.0 init 61 usecs
PCI: 00:1b.0 init
Azalia: base = e0714000
Azalia: codec_mask = 01
HDA: Initializing codec #0
HDA: codec viddid: 10ec0283
HDA: verb loaded.
PCI: 00:1b.0 init 3316 usecs
PCI: 00:1c.0 init
Initializing PCH PCIe bridge.
PCI: 00:1c.0 init 10 usecs
PCI: 00:1c.1 init
Initializing PCH PCIe bridge.
PCI: 00:1c.1 init 10 usecs
PCI: 00:1c.2 init
Initializing PCH PCIe bridge.
PCI: 00:1c.2 init 10 usecs
PCI: 00:1d.0 init
EHCI: Setting up controller.. IOBP: set 0xe5004001 to 0x000000ce
done.
PCI: 00:1d.0 init 36 usecs
PCI: 00:1f.0 init
pch: lpc_init
IOAPIC: Initializing IOAPIC at 0xfec00000
IOAPIC: Bootstrap Processor Local APIC = 0x00
IOAPIC: ID = 0x02
Set power state keep after power failure.
NMI sources disabled.
LynxPoint LP PM init
IOBP: set 0xed00015c to 0x1bc33700
IOBP: set 0xed000118 to 0x00c00000
IOBP: set 0xed000120 to 0x00245560
IOBP: set 0xca000000 to 0x00000009
IOBP: set 0xcf000000 to 0x00007007
IOBP: set 0xce00c000 to 0x00000000
rtc_failed = 0x0
RTC Init
Disabling ACPI via APMC:
done.
PCI: 00:1f.0 init 363 usecs
PCI: 00:1f.2 init
SATA: Initializing...
SATA: Controller in AHCI mode.
ABAR: E0719000
PCI: 00:1f.2 init 30 usecs
PCI: 00:1f.3 init
PCI: 00:1f.3 init 8 usecs
PCI: 00:1f.6 init
PCI: 00:1f.6 init 3 usecs
PCI: 01:00.0 init
PCI: 01:00.0 init 4 usecs
PCI: 02:00.0 init
PCI: 02:00.0 init 3 usecs
PNP: 002e.1 init
PNP: 002e.1 init 4 usecs
PNP: 002e.4 init
PNP: 002e.4 init 1061 usecs
PNP: 002e.7 init
PNP: 002e.7 init 3 usecs
Devices initialized
BS: BS_DEV_INIT times (us): entry 10 run 24022 exit 2
Finalize devices...
Devices finalized
BS: BS_POST_DEVICE times (us): entry 2 run 5 exit 2
BS: BS_OS_RESUME_CHECK times (us): entry 2 run 3 exit 2
Updating MRC cache data.
find_current_mrc_cache_local: picked entry 0 from cache block
MRC data in flash is up to date. No update.
ACPI: Writing ACPI tables at 7f714000.
ACPI:    * FACS
ACPI:    * DSDT
ACPI:    * FADT
ACPI: added table 1/32, length now 40
ACPI:     * SSDT
Found 1 CPU(s) with 2 core(s) each.
PSS: 1400MHz power 15000 control 0xe00 status 0xe00
PSS: 1200MHz power 12559 control 0xc00 status 0xc00
PSS: 1000MHz power 10217 control 0xa00 status 0xa00
PSS: 800MHz power 7982 control 0x800 status 0x800
PSS: 1400MHz power 15000 control 0xe00 status 0xe00
PSS: 1200MHz power 12559 control 0xc00 status 0xc00
PSS: 1000MHz power 10217 control 0xa00 status 0xa00
PSS: 800MHz power 7982 control 0x800 status 0x800
ACPI: added table 2/32, length now 44
ACPI:    * MCFG
ACPI: added table 3/32, length now 48
ACPI:    * MADT
ACPI: added table 4/32, length now 52
current = 7f718c80
ACPI:    * HPET
ACPI: added table 5/32, length now 56
ACPI:     * SSDT2
ACPI: added table 6/32, length now 60
current = 7f718d20
ACPI: done.
ACPI tables: 19744 bytes.
smbios_write_tables: 7f712000
Root Device (Google Panther)
CPU_CLUSTER: 0 (Intel i7 (Haswell) integrated Northbridge)
APIC: 00 (Socket rPGA989 CPU)
APIC: acac (Intel Haswell CPU)
DOMAIN: 0000 (Intel i7 (Haswell) integrated Northbridge)
PCI: 00:00.0 (Intel i7 (Haswell) integrated Northbridge)
PCI: 00:02.0 (Intel i7 (Haswell) integrated Northbridge)
PCI: 00:03.0 (Intel i7 (Haswell) integrated Northbridge)
PCI: 00:13.0 (Intel Series 8 (Lynx Point) Southbridge)
PCI: 00:14.0 (Intel Series 8 (Lynx Point) Southbridge)
PCI: 00:15.0 (Intel Series 8 (Lynx Point) Southbridge)
PCI: 00:15.1 (Intel Series 8 (Lynx Point) Southbridge)
PCI: 00:15.2 (Intel Series 8 (Lynx Point) Southbridge)
PCI: 00:15.3 (Intel Series 8 (Lynx Point) Southbridge)
PCI: 00:15.4 (Intel Series 8 (Lynx Point) Southbridge)
PCI: 00:15.5 (Intel Series 8 (Lynx Point) Southbridge)
PCI: 00:15.6 (Intel Series 8 (Lynx Point) Southbridge)
PCI: 00:16.0 (Intel Series 8 (Lynx Point) Southbridge)
PCI: 00:16.1 (Intel Series 8 (Lynx Point) Southbridge)
PCI: 00:16.2 (Intel Series 8 (Lynx Point) Southbridge)
PCI: 00:16.3 (Intel Series 8 (Lynx Point) Southbridge)
PCI: 00:17.0 (Intel Series 8 (Lynx Point) Southbridge)
PCI: 00:19.0 (Intel Series 8 (Lynx Point) Southbridge)
PCI: 00:1b.0 (Intel Series 8 (Lynx Point) Southbridge)
PCI: 00:1c.3 (Intel Series 8 (Lynx Point) Southbridge)
PCI: 00:1c.4 (Intel Series 8 (Lynx Point) Southbridge)
PCI: 00:1c.0 (Intel Series 8 (Lynx Point) Southbridge)
PCI: 00:1c.1 (Intel Series 8 (Lynx Point) Southbridge)
PCI: 00:1c.2 (Intel Series 8 (Lynx Point) Southbridge)
PCI: 00:1c.5 (Intel Series 8 (Lynx Point) Southbridge)
PCI: 00:1d.0 (Intel Series 8 (Lynx Point) Southbridge)
PCI: 00:1e.0 (Intel Series 8 (Lynx Point) Southbridge)
PCI: 00:1f.0 (Intel Series 8 (Lynx Point) Southbridge)
PNP: 002e.0 (ITE IT8772F Super I/O)
PNP: 002e.1 (ITE IT8772F Super I/O)
PNP: 002e.4 (ITE IT8772F Super I/O)
PNP: 002e.7 (ITE IT8772F Super I/O)
PNP: 002e.5 (ITE IT8772F Super I/O)
PNP: 002e.6 (ITE IT8772F Super I/O)
PNP: 002e.a (ITE IT8772F Super I/O)
PCI: 00:1f.2 (Intel Series 8 (Lynx Point) Southbridge)
PCI: 00:1f.3 (Intel Series 8 (Lynx Point) Southbridge)
PCI: 00:1f.6 (Intel Series 8 (Lynx Point) Southbridge)
PCI: 01:00.0 (unknown)
PCI: 02:00.0 (unknown)
APIC: 02 (unknown)
SMBIOS tables: 330 bytes.
Writing table forward entry at 0x00000500
Wrote coreboot table at: 00000500, 0x10 bytes, checksum e06d
Table forward entry ends at 0x00000528.
... aligned to 0x00001000
Writing coreboot table at 0x7f70a000
rom_table_end = 0x7f70a000
... aligned to 0x7f710000
 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
 1. 0000000000001000-000000000009ffff: RAM
 2. 00000000000a0000-00000000000fffff: RESERVED
 3. 0000000000100000-000000007f709fff: RAM
 4. 000000007f70a000-000000007f7fffff: CONFIGURATION TABLES
 5. 000000007f800000-00000000821fffff: RESERVED
 6. 00000000f0000000-00000000f3ffffff: RESERVED
 7. 00000000fed10000-00000000fed19fff: RESERVED
 8. 00000000fed84000-00000000fed84fff: RESERVED
 9. 0000000100000000-000000017cdfffff: RAM
Wrote coreboot table at: 7f70a000, 0x1b8 bytes, checksum 87bd
coreboot table: 464 bytes.
CBMEM ROOT  0. 7f7ff000 00001000
CAR GLOBALS 1. 7f7fe000 00001000
CONSOLE     2. 7f7de000 00020000
TIME STAMP  3. 7f7dd000 00001000
MRC DATA    4. 7f7dc000 00001000
ROMSTAGE    5. 7f7db000 00001000
ROMSTG STCK 6. 7f7d6000 00005000
RAMSTAGE    7. 7f790000 00046000
RAMSTAGE $  8. 7f74a000 00046000
GDT         9. 7f749000 00001000
ACPI GNVS  10. 7f748000 00001000
SMM BACKUP 11. 7f738000 00010000
ACPI       12. 7f714000 00024000
GNVS PTR   13. 7f713000 00001000
SMBIOS     14. 7f712000 00001000
COREBOOT   15. 7f70a000 00008000
BS: BS_WRITE_TABLES times (us): entry 4986 run 216 exit 2
CBFS: located payload @ fff3f438, 46543 bytes.
Loading segment from rom address 0xfff3f438
  code (compression=1)
  New segment dstaddr 0xea900 memsize 0x15700 srcaddr 0xfff3f470 filesize 0xb597
Loading segment from rom address 0xfff3f454
  Entry Point 0x000fd3bc
Payload being loaded below 1MiB without region being marked as RAM usable.
Loading Segment: addr: 0x00000000000ea900 memsz: 0x0000000000015700 filesz: 0x000000000000b597
Post relocation: addr: 0x00000000000ea900 memsz: 0x0000000000015700 filesz: 0x000000000000b597
using LZMA
dest 000ea900, end 00100000, bouncebuffer ffffffff
BS: BS_PAYLOAD_LOAD times (us): entry 2 run 17650 exit 2
PCH watchdog disabled
Jumping to boot code at 000fd3bc
SeaBIOS (version rel-1.7.5-161-g6f75635-20150129-MattDevo)
Found coreboot cbmem console @ 7f7de000
Found mainboard Google Panther
malloc preinit
Relocating init from 0x000eb9e0 to 0x7f6c1550 (size 35312)
malloc init
Found CBFS header at 0xfffff848
Add romfile: cmos_layout.bin (size=1164)
Add romfile: pci8086,0406.rom (size=65536)
Add romfile: cpu_microcode_blob.bin (size=43072)
Add romfile: config (size=5233)
Add romfile: revision (size=693)
Add romfile: etc/boot-menu-wait (size=8)
Add romfile: etc/boot-menu-key (size=1)
Add romfile: etc/boot-menu-message (size=27)
Add romfile: links (size=558)
Add romfile:  (size=13912)
Add romfile: fallback/romstage (size=40433)
Add romfile: fallback/ramstage (size=87462)
Add romfile: fallback/payload (size=46543)
Add romfile: vpd.bin (size=16384)
Add romfile:  (size=333080)
Add romfile: mrc.bin (size=191236)
Add romfile:  (size=70744)
Add romfile: mrc.cache (size=65536)
Add romfile:  (size=63512)
Copying data 558@0xfff1c6a8 to 558@0x7f6c0320
Add romfile: pci8086,0402.rom (size=65536)
Add romfile: pci8086,0406.rom (size=65536)
Add romfile: pci8086,040a.rom (size=65536)
Add romfile: pci8086,0a06.rom (size=65536)
Add romfile: pci8086,0412.rom (size=65536)
Add romfile: pci8086,0416.rom (size=65536)
Add romfile: pci8086,041a.rom (size=65536)
Add romfile: pci8086,0a16.rom (size=65536)
Add romfile: pci8086,0422.rom (size=65536)
Add romfile: pci8086,0426.rom (size=65536)
Add romfile: pci8086,042a.rom (size=65536)
Add romfile: pci8086,0a26.rom (size=65536)
init ivt
init bda
init bios32
init PMM
init PNPBIOS table
init keyboard
init pic
math cp init
CPU Mhz=1397
init timer
PCI probe
Found 15 PCI devices (max PCI bus is 03)
Relocating coreboot bios tables
Copying SMBIOS entry point from 0x7f712000 to 0x000f43b0
Copying ACPI RSDP from 0x7f714000 to 0x000f4380
Using pmtimer, ioport 0x1008
Scan for VGA option rom
Copying data 65536@0xfff004f8 to 65536@0x000c0000
Running option rom at c000:0003
Turning on vga text mode console
SeaBIOS (version rel-1.7.5-161-g6f75635-20150129-MattDevo)
init usb
XHCI init on dev 00:14.0: regs @ 0xe0700000, 13 ports, 32 slots, 32 byte contexts
XHCI    protocol USB  2.00, 8 ports (offset 1), def 3018
XHCI    protocol USB  3.00, 4 ports (offset 10), def 1000
XHCI    extcap 0xc1 @ e0708040
XHCI    extcap 0xc0 @ e0708070
XHCI    extcap 0x1 @ e0708460
XHCI    extcap 0xa @ e0708480
configure_xhci: resetting
configure_xhci: setup 16 scratch pad buffers
xhci_hub_reset port #2: 0x000206e1, powered, pls 7, speed 1 [Full]
XHCI port #2: 0x00200e03, powered, enabled, pls 0, speed 3 [High]
set_address 0x7f709fb0
xhci_alloc_pipe: usbdev 0x7f6bf510, ring 0x7f709900, slotid 0, epid 1
xhci_cmd_enable_slot:
xhci_process_events: status change port #2
xhci_process_events: status change port #3
xhci_process_events: status change port #4
xhci_process_events: status change port #2
xhci_alloc_pipe: enable slot: got slotid 1
xhci_cmd_address_device: slotid 1
xhci_realloc_pipe: usbdev 0x7f6bf510, ring 0x7f709900, slotid 1, epid 1
config_usb: 0x7f709a20
device rev=0200 cls=00 sub=00 proto=00 size=64
xhci_realloc_pipe: usbdev 0x7f6bf510, ring 0x7f709900, slotid 1, epid 1
xhci_alloc_pipe: usbdev 0x7f6bf510, ring 0x000ef600, slotid 0, epid 3
xhci_cmd_configure_endpoint: slotid 1, add 0x9, del 0x0
xhci_alloc_pipe: usbdev 0x7f6bf510, ring 0x000ef400, slotid 0, epid 4
xhci_cmd_configure_endpoint: slotid 1, add 0x11, del 0x0
Searching bootorder for: /pci@i0cf8/usb@14/storage@2/*@0/*@0,0
Searching bootorder for: /pci@i0cf8/usb@14/usb-*@2
USB MSC vendor='' product='Patriot Memory' rev='PMAP' type=0 removable=1
USB MSC blksize=512 sectors=31277056
Registering bootable: USB MSC Drive  Patriot Memory PMAP (type:4 prio:103 data:f4350)
xhci_hub_reset port #3: 0x000206e1, powered, pls 7, speed 1 [Full]
XHCI port #3: 0x00200603, powered, enabled, pls 0, speed 1 [Full]
set_address 0x7f709fb0
xhci_alloc_pipe: usbdev 0x7f6bf510, ring 0x7f709200, slotid 0, epid 1
xhci_cmd_enable_slot:
xhci_process_events: status change port #3
xhci_alloc_pipe: enable slot: got slotid 2
xhci_cmd_address_device: slotid 2
xhci_realloc_pipe: usbdev 0x7f6bf510, ring 0x7f709200, slotid 2, epid 1
config_usb: 0x7f709320
device rev=0200 cls=00 sub=00 proto=00 size=8
xhci_realloc_pipe: usbdev 0x7f6bf510, ring 0x7f709200, slotid 2, epid 1
usb_hid_setup 0x7f709320
xhci_alloc_pipe: usbdev 0x7f6bf510, ring 0x000ef200, slotid 0, epid 3
xhci_cmd_configure_endpoint: slotid 2, add 0x9, del 0x0
USB keyboard initialized
xhci_hub_reset port #4: 0x000206e1, powered, pls 7, speed 1 [Full]
XHCI port #4: 0x00200603, powered, enabled, pls 0, speed 1 [Full]
set_address 0x7f709fb0
xhci_alloc_pipe: usbdev 0x7f6bf510, ring 0x7f709000, slotid 0, epid 1
xhci_cmd_enable_slot:
xhci_process_events: status change port #4
xhci_alloc_pipe: enable slot: got slotid 3
xhci_cmd_address_device: slotid 3
xhci_realloc_pipe: usbdev 0x7f6bf510, ring 0x7f709000, slotid 3, epid 1
config_usb: 0x7f709120
device rev=0110 cls=e0 sub=01 proto=01 size=64
xhci_realloc_pipe: usbdev 0x7f6bf510, ring 0x7f709000, slotid 3, epid 1
xhci_realloc_pipe: reconf ctl endpoint pkt size: 8 -> 64
xhci_cmd_evaluate_context: slotid 3, add 0x2, del 0x0
init ahci
AHCI controller at 1f.2, iobase e0719000, irq 10
AHCI: cap 0xdf34ff01, ports_impl 0x1
AHCI/0: probing
AHCI/0: link up
AHCI/0: ... finished, status 0x51, ERROR 0x4
Searching bootorder for: /pci@i0cf8/*@1f,2/drive@0/disk@0
AHCI/0: registering: "AHCI/0: SanDisk SSD U110 16GB ATA-9 Hard-Disk (15272 MiBytes)"
Registering bootable: AHCI/0: SanDisk SSD U110 16GB ATA-9 Hard-Disk (15272 MiBytes) (type:2 prio:103 data:f42e0)
Scan for option roms
Copying data 27@0xfff1c638 to 27@0x7f6bf460
Copying data 1@0xfff1c5f8 to 8@0x00006dc8

Press ESC for boot menu.

Copying data 8@0xfff1c5b8 to 8@0x00006dc0
Checking for bootsplash
Searching bootorder for: HALT
Mapping hd drive 0x000f42e0 to 0
drive 0x000f42e0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=31277232
Mapping hd drive 0x000f4350 to 1
drive 0x000f4350: PCHS=0/0/0 translation=lba LCHS=1024/255/63 s=31277056
finalize PMM
malloc finalize
Space available for UMB: d0000-ee800, f0000-f42e0
Returned 188416 bytes of ZoneHigh
e820 map has 9 items:
  0: 0000000000000000 - 000000000009fc00 = 1 RAM
  1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
  2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
  3: 0000000000100000 - 000000007f6f8000 = 1 RAM
  4: 000000007f6f8000 - 0000000082200000 = 2 RESERVED
  5: 00000000f0000000 - 00000000f4000000 = 2 RESERVED
  6: 00000000fed10000 - 00000000fed1a000 = 2 RESERVED
  7: 00000000fed84000 - 00000000fed85000 = 2 RESERVED
  8: 0000000100000000 - 000000017ce00000 = 1 RAM
Jump to int19
enter handle_19:
  NULL
Booting from Hard Disk...
Booting from 0000:7c00