[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-2 (2014-09-20)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16-2-amd64 root=UUID=7d4748f5-6bf2-44dd-a78c-7c82355091e1 ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7fbdfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c7fbe000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000f8ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASROCK E350M1/E350M1, BIOS 4.0-7057-g9ebb3f5 10/17/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FF8000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000021f000000 aka 8688M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xc7fbe max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f4040-0x000f404f] mapped at [ffff8800000f4040]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af1000, 0x01af1fff] PGTABLE
[    0.000000] BRK [0x01af2000, 0x01af2fff] PGTABLE
[    0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x21ee00000-0x21effffff]
[    0.000000]  [mem 0x21ee00000-0x21effffff] page 2M
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x21c000000-0x21edfffff]
[    0.000000]  [mem 0x21c000000-0x21edfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[    0.000000]  [mem 0x200000000-0x21bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xc7fbdfff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xc7dfffff] page 2M
[    0.000000]  [mem 0xc7e00000-0xc7fbdfff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[    0.000000]  [mem 0x100000000-0x1ffffffff] page 1G
[    0.000000] RAMDISK: [mem 0x3626e000-0x3712efff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F4020 000014 (v00 CORE  )
[    0.000000] ACPI: RSDT 0x00000000C7FE2624 000040 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000C7FE4D18 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000C7FE26C8 00260E (v02 ASROCK COREBOOT 00010001 INTL 20140926)
[    0.000000] ACPI: FACS 0x00000000C7FE4CD8 000040
[    0.000000] ACPI: HPET 0x00000000C7FE4E10 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x00000000C7FE4E48 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HEST 0x00000000C7FE4EA8 000028 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SSDT 0x00000000C7FE4ED0 00168E (v02 AMD    ALIB     00000001 MSFT 04000000)
[    0.000000] ACPI: SSDT 0x00000000C7FE6560 0003DE (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000C7FE6940 000045 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x21effffff]
[    0.000000]   NODE_DATA [mem 0x21eff9000-0x21effdfff]
[    0.000000]  [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880216c00000-ffff88021d7fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x21effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xc7fbdfff]
[    0.000000]   node   0: [mem 0x100000000-0x21effffff]
[    0.000000] On node 0 totalpages: 1994588
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11144 pages used for memmap
[    0.000000]   DMA32 zone: 815038 pages, LIFO batch:31
[    0.000000]   Normal zone: 16072 pages used for memmap
[    0.000000]   Normal zone: 1175552 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc7fbe000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xf8ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf9000000-0xffffffff]
[    0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021ec00000 s85824 r8192 d20672 u1048576
[    0.000000] pcpu-alloc: s85824 r8192 d20672 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1967295
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16-2-amd64 root=UUID=7d4748f5-6bf2-44dd-a78c-7c82355091e1 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7774788K/7978352K available (5188K kernel code, 941K rwdata, 1824K rodata, 1196K init, 840K bss, 203564K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:33024 nr_irqs:512 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1599.998 MHz processor
[    0.000055] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.99 BogoMIPS (lpj=6399992)
[    0.000061] pid_max: default: 32768 minimum: 301
[    0.000082] ACPI: Core revision 20140424
[    0.006418] ACPI: All ACPI Tables successfully acquired
[    0.006491] Security Framework initialized
[    0.006515] AppArmor: AppArmor disabled by boot time parameter
[    0.006518] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.007628] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.013745] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.016427] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.016453] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.017121] Initializing cgroup subsys memory
[    0.017140] Initializing cgroup subsys devices
[    0.017159] Initializing cgroup subsys freezer
[    0.017166] Initializing cgroup subsys net_cls
[    0.017178] Initializing cgroup subsys blkio
[    0.017188] Initializing cgroup subsys perf_event
[    0.017193] Initializing cgroup subsys net_prio
[    0.017247] tseg: 0000000000
[    0.017260] CPU: Physical Processor ID: 0
[    0.017262] CPU: Processor Core ID: 0
[    0.017266] mce: CPU supports 6 MCE banks
[    0.017285] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
tlb_flushall_shift: 6
[    0.017494] Freeing SMP alternatives memory: 20K (ffffffff81a18000 - ffffffff81a1d000)
[    0.019957] ftrace: allocating 21542 entries in 85 pages
[    0.039708] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.079406] smpboot: CPU0: AMD E-350 Processor (fam: 14, model: 01, stepping: 00)
[    0.184548] Performance Events: AMD PMU driver.
[    0.184558] ... version:                0
[    0.184561] ... bit width:              48
[    0.184563] ... generic registers:      4
[    0.184566] ... value mask:             0000ffffffffffff
[    0.184568] ... max period:             00007fffffffffff
[    0.184570] ... fixed-purpose events:   0
[    0.184573] ... event mask:             000000000000000f
[    0.188000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.188283] x86: Booting SMP configuration:
[    0.188288] .... node  #0, CPUs:      #1
[    0.201503] x86: Booted up 1 node, 2 CPUs
[    0.201508] smpboot: Total of 2 processors activated (6399.99 BogoMIPS)
[    0.202431] devtmpfs: initialized
[    0.213204] pinctrl core: initialized pinctrl subsystem
[    0.213443] NET: Registered protocol family 16
[    0.213773] cpuidle: using governor ladder
[    0.213779] cpuidle: using governor menu
[    0.214041] ACPI: bus type PCI registered
[    0.214047] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.214323] PCI: Using configuration type 1 for base access
[    0.214326] PCI: Using configuration type 1 for extended access
[    0.214808] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.214811] mtrr: probably your BIOS does not setup all CPUs.
[    0.214813] mtrr: corrected configuration.
[    0.227715] ACPI: Added _OSI(Module Device)
[    0.227724] ACPI: Added _OSI(Processor Device)
[    0.227727] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.227730] ACPI: Added _OSI(Processor Aggregator Device)
[    0.230091] ACPI: Executed 2 blocks of module-level executable AML code
[    0.234786] ACPI: Interpreter enabled
[    0.234806] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.234833] ACPI: (supports S0 S1 S3 S4 S5)
[    0.234836] ACPI: Using IOAPIC for interrupt routing
[    0.234876] HEST: Table parsing has been initialized.
[    0.234883] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.253586] ACPI: Power Resource [PFN0] (on)
[    0.253999] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.254011] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.254161] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.254729] PCI host bridge to bus 0000:00
[    0.254737] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.254742] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.254746] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.254751] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.254755] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[    0.254771] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[    0.254963] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
[    0.254982] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[    0.254993] pci 0000:00:01.0: reg 0x14: [io  0x1000-0x10ff]
[    0.255004] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf003ffff]
[    0.255070] pci 0000:00:01.0: supports D1 D2
[    0.255151] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.255242] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
[    0.255258] pci 0000:00:01.1: reg 0x10: [mem 0xf0040000-0xf0043fff]
[    0.255334] pci 0000:00:01.1: supports D1 D2
[    0.255413] pci 0000:00:01.1: System wakeup disabled by ACPI
[    0.255601] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.255629] pci 0000:00:11.0: reg 0x10: [io  0x1410-0x1417]
[    0.255644] pci 0000:00:11.0: reg 0x14: [io  0x1420-0x1423]
[    0.255658] pci 0000:00:11.0: reg 0x18: [io  0x1418-0x141f]
[    0.255672] pci 0000:00:11.0: reg 0x1c: [io  0x1424-0x1427]
[    0.255686] pci 0000:00:11.0: reg 0x20: [io  0x1400-0x140f]
[    0.255700] pci 0000:00:11.0: reg 0x24: [mem 0xf004b000-0xf004b3ff]
[    0.255909] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.255930] pci 0000:00:12.0: reg 0x10: [mem 0xf0048000-0xf0048fff]
[    0.256075] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.256242] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.256269] pci 0000:00:12.2: reg 0x10: [mem 0xf004b400-0xf004b4ff]
[    0.256378] pci 0000:00:12.2: supports D1 D2
[    0.256382] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.256466] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.256626] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.256646] pci 0000:00:13.0: reg 0x10: [mem 0xf0049000-0xf0049fff]
[    0.256792] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.256921] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.256948] pci 0000:00:13.2: reg 0x10: [mem 0xf004b500-0xf004b5ff]
[    0.257057] pci 0000:00:13.2: supports D1 D2
[    0.257061] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.257143] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.257305] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.257614] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.257645] pci 0000:00:14.2: reg 0x10: [mem 0xf0044000-0xf0047fff 64bit]
[    0.257733] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.257913] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.258204] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.258326] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.258482] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.258502] pci 0000:00:14.5: reg 0x10: [mem 0xf004a000-0xf004afff]
[    0.258649] pci 0000:00:14.5: System wakeup disabled by ACPI
[    0.258809] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[    0.258978] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[    0.259142] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[    0.259308] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[    0.259485] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[    0.259652] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[    0.259815] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[    0.259978] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[    0.260404] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[    0.260420] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.260425] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.260429] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.260434] pci 0000:00:14.4:   bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
[    0.261110] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.261355] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.261526] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.261711] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.261879] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.261981] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled.
[    0.262147] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.262318] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.262661] ACPI: Enabled 6 GPEs in block 00 to 1F
[    0.263156] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.263172] vgaarb: loaded
[    0.263175] vgaarb: bridge control possible 0000:00:01.0
[    0.263335] PCI: Using ACPI for IRQ routing
[    0.263341] PCI: pci_cache_line_size set to 64 bytes
[    0.263481] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.263486] e820: reserve RAM buffer [mem 0xc7fbe000-0xc7ffffff]
[    0.263489] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[    0.263852] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.263861] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.266008] Switched to clocksource hpet
[    0.277910] pnp: PnP ACPI init
[    0.277951] ACPI: bus type PNP registered
[    0.278525] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.278817] pnp: PnP ACPI: found 1 devices
[    0.278820] ACPI: bus type PNP unregistered
[    0.301207] pci 0000:00:14.4: PCI bridge to [bus 01]
[    0.301236] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.301241] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.301246] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.301250] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
[    0.301256] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
[    0.301260] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
[    0.301264] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    0.301268] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff]
[    0.301461] NET: Registered protocol family 2
[    0.302204] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.302621] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.303201] TCP: Hash tables configured (established 65536 bind 65536)
[    0.303296] TCP: reno registered
[    0.303330] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.303427] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.303909] NET: Registered protocol family 1
[    0.303953] pci 0000:00:01.0: Boot video device
[    0.359532] PCI: CLS 64 bytes, default 64
[    0.359668] Unpacking initramfs...
[    0.927864] Freeing initrd memory: 15108K (ffff88003626e000 - ffff88003712f000)
[    0.927975] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.927982] software IO TLB [mem 0xc3fbe000-0xc7fbe000] (64MB) mapped at [ffff8800c3fbe000-ffff8800c7fbdfff]
[    0.928479] microcode: CPU0: patch_level=0x05000028
[    0.928601] microcode: CPU1: patch_level=0x05000028
[    0.928941] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.928961] LVT offset 0 assigned for vector 0x400
[    0.929088] perf: AMD IBS detected (0x000000ff)
[    0.930194] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.930370] audit: initializing netlink subsys (disabled)
[    0.930424] audit: type=2000 audit(1413623725.820:1): initialized
[    0.931396] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.931454] zbud: loaded
[    0.932238] VFS: Disk quotas dquot_6.5.2
[    0.932350] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.932545] msgmni has been set to 15214
[    0.934966] alg: No test for stdrng (krng)
[    0.935212] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.935405] io scheduler noop registered
[    0.935411] io scheduler deadline registered
[    0.935584] io scheduler cfq registered (default)
[    0.935798] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.935839] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.936044] GHES: Failed to enable APEI firmware first mode.
[    0.936448] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.957151] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.959211] Linux agpgart interface v0.103
[    0.959454] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.963504] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.963527] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.964402] mousedev: PS/2 mouse device common for all mice
[    0.964625] rtc_cmos 00:00: RTC can wake from S4
[    0.965062] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    0.965188] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[    0.965228] ledtrig-cpu: registered to indicate activity on CPUs
[    0.965364] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    0.965367] AMD IOMMUv2 functionality not available on this system
[    0.965563] TCP: cubic registered
[    0.965755] NET: Registered protocol family 10
[    0.966672] mip6: Mobile IPv6
[    0.966685] NET: Registered protocol family 17
[    0.966696] mpls_gso: MPLS GSO support
[    0.968442] registered taskstats version 1
[    0.969504] rtc_cmos 00:00: setting system clock to 2014-10-18 09:15:26 UTC (1413623726)
[    0.969631] PM: Hibernation image not present or could not be loaded.
[    0.972038] Freeing unused kernel memory: 1196K (ffffffff818ed000 - ffffffff81a18000)
[    0.972048] Write protecting the kernel read-only data: 8192k
[    0.977579] Freeing unused kernel memory: 944K (ffff880001514000 - ffff880001600000)
[    0.979214] Freeing unused kernel memory: 224K (ffff8800017c8000 - ffff880001800000)
[    1.013069] systemd-udevd[60]: starting version 215
[    1.013712] random: systemd-udevd urandom read with 2 bits of entropy available
[    1.040630] ACPI: bus type USB registered
[    1.040701] usbcore: registered new interface driver usbfs
[    1.040727] usbcore: registered new interface driver hub
[    1.044861] SCSI subsystem initialized
[    1.045438] usbcore: registered new device driver usb
[    1.046713] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.047510] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.047943] ehci-pci: EHCI PCI platform driver
[    1.048361] QUIRK: Enable AMD PLL fix
[    1.048398] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.048413] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.048428] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.048513] ehci-pci 0000:00:12.2: debug port 1
[    1.048590] ehci-pci 0000:00:12.2: irq 17, io mem 0xf004b400
[    1.052307] libata version 3.00 loaded.
[    1.058070] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.058211] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.058217] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.058221] usb usb1: Product: EHCI Host Controller
[    1.058225] usb usb1: Manufacturer: Linux 3.16-2-amd64 ehci_hcd
[    1.058229] usb usb1: SerialNumber: 0000:00:12.2
[    1.058512] hub 1-0:1.0: USB hub found
[    1.058532] hub 1-0:1.0: 5 ports detected
[    1.059205] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.059219] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.059231] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.059248] ehci-pci 0000:00:13.2: debug port 1
[    1.059306] ehci-pci 0000:00:13.2: irq 17, io mem 0xf004b500
[    1.069356] ACPI: Fan [FAN0] (on)
[    1.070085] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.070208] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.070213] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.070218] usb usb2: Product: EHCI Host Controller
[    1.070222] usb usb2: Manufacturer: Linux 3.16-2-amd64 ehci_hcd
[    1.070226] usb usb2: SerialNumber: 0000:00:13.2
[    1.070973] hub 2-0:1.0: USB hub found
[    1.071163] hub 2-0:1.0: 5 ports detected
[    1.072852] ohci-pci: OHCI PCI platform driver
[    1.073234] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.073249] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.073320] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0048000
[    1.075345] thermal LNXTHERM:00: registered as thermal_zone0
[    1.075355] ACPI: Thermal Zone [TZ00] (40 C)
[    1.130633] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.130643] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.130647] usb usb3: Product: OHCI PCI host controller
[    1.130651] usb usb3: Manufacturer: Linux 3.16-2-amd64 ohci_hcd
[    1.130655] usb usb3: SerialNumber: 0000:00:12.0
[    1.131242] hub 3-0:1.0: USB hub found
[    1.131268] hub 3-0:1.0: 5 ports detected
[    1.131905] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.131919] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[    1.131973] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0049000
[    1.190478] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.190488] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.190492] usb usb4: Product: OHCI PCI host controller
[    1.190497] usb usb4: Manufacturer: Linux 3.16-2-amd64 ohci_hcd
[    1.190500] usb usb4: SerialNumber: 0000:00:13.0
[    1.191121] hub 4-0:1.0: USB hub found
[    1.191146] hub 4-0:1.0: 5 ports detected
[    1.191777] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.191791] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
[    1.191841] ohci-pci 0000:00:14.5: irq 18, io mem 0xf004a000
[    1.250552] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.250562] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.250567] usb usb5: Product: OHCI PCI host controller
[    1.250571] usb usb5: Manufacturer: Linux 3.16-2-amd64 ohci_hcd
[    1.250575] usb usb5: SerialNumber: 0000:00:14.5
[    1.250912] hub 5-0:1.0: USB hub found
[    1.251004] hub 5-0:1.0: 2 ports detected
[    1.251752] ahci 0000:00:11.0: version 3.0
[    1.252359] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    1.252366] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part 
[    1.254732] scsi0 : ahci
[    1.255029] scsi1 : ahci
[    1.255279] scsi2 : ahci
[    1.255473] scsi3 : ahci
[    1.255646] scsi4 : ahci
[    1.255820] scsi5 : ahci
[    1.255928] ata1: SATA max UDMA/133 abar m1024@0xf004b000 port 0xf004b100 irq 19
[    1.255933] ata2: SATA max UDMA/133 abar m1024@0xf004b000 port 0xf004b180 irq 19
[    1.255938] ata3: SATA max UDMA/133 abar m1024@0xf004b000 port 0xf004b200 irq 19
[    1.255943] ata4: SATA max UDMA/133 abar m1024@0xf004b000 port 0xf004b280 irq 19
[    1.255947] ata5: SATA max UDMA/133 abar m1024@0xf004b000 port 0xf004b300 irq 19
[    1.255951] ata6: SATA max UDMA/133 abar m1024@0xf004b000 port 0xf004b380 irq 19
[    1.370454] usb 1-3: new high-speed USB device number 2 using ehci-pci
[    1.520234] usb 1-3: New USB device found, idVendor=148f, idProduct=2870
[    1.520245] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.520249] usb 1-3: Product: 802.11 n WLAN
[    1.520253] usb 1-3: Manufacturer: Ralink
[    1.574350] ata4: SATA link down (SStatus 0 SControl 300)
[    1.574404] ata6: SATA link down (SStatus 0 SControl 300)
[    1.574447] ata5: SATA link down (SStatus 0 SControl 300)
[    1.574477] ata3: SATA link down (SStatus 0 SControl 300)
[    1.574528] ata2: SATA link down (SStatus 0 SControl 300)
[    1.746341] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.747300] ata1.00: ATA-9: SanDisk SDSSDP064G, 2.0.0, max UDMA/133
[    1.747309] ata1.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    1.748426] ata1.00: configured for UDMA/133
[    1.749074] scsi 0:0:0:0: Direct-Access     ATA      SanDisk SDSSDP06 0    PQ: 0 ANSI: 5
[    1.785777] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[    1.785929] sd 0:0:0:0: [sda] Write Protect is off
[    1.785935] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.785984] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.786934]  sda: sda1
[    1.788563] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.790108] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.842150] usb 4-2: new low-speed USB device number 2 using ohci-pci
[    1.926175] tsc: Refined TSC clocksource calibration: 1599.999 MHz
[    1.970924] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.027448] usb 4-2: New USB device found, idVendor=046d, idProduct=c31b
[    2.027459] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.027464] usb 4-2: Product: Logitech USB Keyboard
[    2.027468] usb 4-2: Manufacturer: Logitech
[    2.456249] fuse init (API version 7.23)
[    2.581100] systemd-udevd[167]: starting version 215
[    2.768257] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    2.768271] ACPI: Power Button [PWRB]
[    2.768388] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    2.768393] ACPI: Power Button [PWRF]
[    2.769629] ACPI: acpi_idle registered with cpuidle
[    2.776278] acpi-cpufreq: overriding BIOS provided _PSD data
[    2.812754] [drm] Initialized drm 1.1.0 20060810
[    2.835691] snd_hda_intel 0000:00:01.1: irq 40 for MSI/MSI-X
[    2.850588] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0b (\SMB0) (20140424/utaddress-258)
[    2.850605] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.854826] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[    2.854956] sp5100_tco: PCI Revision ID: 0x42
[    2.855005] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[    2.855019] sp5100_tco: Last reboot was not triggered by watchdog.
[    2.860099] sp5100_tco: initialized (0xffffc90000e2eb00). heartbeat=60 sec (nowayout=0)
[    2.882481] [drm] radeon kernel modesetting enabled.
[    2.884214] hidraw: raw HID events driver (C) Jiri Kosina
[    2.886335] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4
[    2.896105] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802).
[    2.896137] [drm] register mmio base: 0xF0000000
[    2.896140] [drm] register mmio size: 262144
[    2.896226] ATOM BIOS: AMD
[    2.896305] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[    2.896310] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
[    2.896314] [drm] Detected VRAM RAM=384M, BAR=256M
[    2.896317] [drm] RAM width 32bits DDR
[    2.897892] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    2.901094] [TTM] Zone  kernel: Available graphics memory: 3896140 kiB
[    2.901105] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    2.901108] [TTM] Initializing pool allocator
[    2.901121] [TTM] Initializing DMA pool allocator
[    2.901175] [drm] radeon: 384M of VRAM memory ready
[    2.901179] [drm] radeon: 1024M of GTT memory ready.
[    2.901214] [drm] Loading PALM Microcode
[    2.903168] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_pfp.bin
[    2.904314] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_me.bin
[    2.904927] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_rlc.bin
[    2.904941] [drm] Internal thermal controller without fan control
[    2.905035] [drm] Found smc ucode version: 0x00010601
[    2.905132] [drm] radeon: dpm initialized
[    2.907332] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_uvd.bin
[    2.907419] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    2.916466] sound hdaudioC1D0: ALC892: SKU not ready 0x00000100
[    2.916919] sound hdaudioC1D0: autoconfig: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
[    2.916924] sound hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.916933] sound hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    2.916937] sound hdaudioC1D0:    mono: mono_out=0x0
[    2.916941] sound hdaudioC1D0:    dig-out=0x1e/0x0
[    2.916944] sound hdaudioC1D0:    inputs:
[    2.916950] sound hdaudioC1D0:      Rear Mic=0x18
[    2.916954] sound hdaudioC1D0:      Front Mic=0x19
[    2.916957] sound hdaudioC1D0:      Line=0x1a
[    2.916961] sound hdaudioC1D0:      CD=0x1c
[    2.920003] usbcore: registered new interface driver usbhid
[    2.920011] usbhid: USB HID core driver
[    2.943555] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
[    2.943790] radeon 0000:00:01.0: WB enabled
[    2.943798] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffff8800c3b6ac00
[    2.943804] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffff8800c3b6ac0c
[    2.944582] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90000fb2118
[    2.944588] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.944590] [drm] Driver supports precise vblank timestamp query.
[    2.944625] radeon 0000:00:01.0: irq 41 for MSI/MSI-X
[    2.944651] radeon 0000:00:01.0: radeon: using MSI.
[    2.944691] [drm] radeon: irq initialized.
[    2.978153] [drm] ring test on 0 succeeded in 1 usecs
[    2.978341] [drm] ring test on 3 succeeded in 1 usecs
[    2.986470] kvm: Nested Virtualization enabled
[    2.986481] kvm: Nested Paging enabled
[    3.044274] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/hdaudioC1D0/input8
[    3.044720] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[    3.044796] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[    3.044871] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[    3.044946] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[    3.045023] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[    3.045097] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
[    3.045170] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
[    3.045244] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
[    3.045405] [drm] ring test on 5 succeeded in 1 usecs
[    3.065325] [drm] UVD initialized successfully.
[    3.065417] Switched to clocksource tsc
[    3.066655] [drm] ib test on ring 0 succeeded in 0 usecs
[    3.066701] [drm] ib test on ring 3 succeeded in 0 usecs
[    3.089426] [drm] ib test on ring 5 succeeded
[    3.101823] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb4/4-2/4-2:1.0/0003:046D:C31B.0001/input/input17
[    3.103951] hid-generic 0003:046D:C31B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:13.0-2/input0
[    3.107575] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb4/4-2/4-2:1.1/0003:046D:C31B.0002/input/input18
[    3.113889] hid-generic 0003:046D:C31B.0002: input,hidraw1: USB HID v1.11 Device [Logitech Logitech USB Keyboard] on usb-0000:00:13.0-2/input1
[    3.126343] [drm] Radeon Display Connectors
[    3.126352] [drm] Connector 0:
[    3.126355] [drm]   HDMI-A-1
[    3.126357] [drm]   HPD1
[    3.126362] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    3.126365] [drm]   Encoders:
[    3.126367] [drm]     DFP1: INTERNAL_UNIPHY
[    3.126370] [drm] Connector 1:
[    3.126372] [drm]   HDMI-A-2
[    3.126374] [drm]   HPD2
[    3.126378] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[    3.126380] [drm]   Encoders:
[    3.126382] [drm]     DFP2: INTERNAL_UNIPHY
[    3.126384] [drm] Connector 2:
[    3.126386] [drm]   VGA-1
[    3.126389] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[    3.126391] [drm]   Encoders:
[    3.126393] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    3.229696] [drm] fb mappable at 0xE0477000
[    3.229706] [drm] vram apper at 0xE0000000
[    3.229708] [drm] size 3686400
[    3.229711] [drm] fb depth is 24
[    3.229714] [drm]    pitch is 5120
[    3.230770] fbcon: radeondrmfb (fb0) is primary device
[    3.250980] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    3.260613] Console: switching to colour frame buffer device 160x45
[    3.266907] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[    3.266912] radeon 0000:00:01.0: registered panic notifier
[    3.281212] systemd-journald[149]: Received request to flush runtime journal from PID 1
[    3.282205] [drm] Initialized radeon 2.39.0 20080528 for 0000:00:01.0 on minor 0
[    3.405518] random: nonblocking pool is initialized
[    4.098674] cfg80211: Calling CRDA to update world regulatory domain
[    4.252170] usb 1-3: reset high-speed USB device number 2 using ehci-pci
[    4.396932] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2872, rev 0202 detected
[    4.451463] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
[    4.489289] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    4.489974] usbcore: registered new interface driver rt2800usb
[    4.597106] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[    4.597759] rt2800usb 1-3:1.0: firmware: direct-loading firmware rt2870.bin
[    4.597776] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[    4.964540] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    6.137652] cfg80211: Calling CRDA to update world regulatory domain
[    6.449925] wlan0: authenticate with 00:3a:98:a9:fd:47
[    6.486437] wlan0: direct probe to 00:3a:98:a9:fd:47 (try 1/3)
[    6.690166] wlan0: send auth to 00:3a:98:a9:fd:47 (try 2/3)
[    6.798086] wlan0: send auth to 00:3a:98:a9:fd:47 (try 3/3)
[    6.801551] wlan0: authenticated
[    6.806081] wlan0: associate with 00:3a:98:a9:fd:47 (try 1/3)
[    6.812392] wlan0: RX AssocResp from 00:3a:98:a9:fd:47 (capab=0x431 status=0 aid=5)
[    6.823310] wlan0: associated
[    6.823412] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[    6.823502] cfg80211: Calling CRDA to update world regulatory domain
[   75.537488] wlan0: authenticate with 00:3a:98:bf:e8:d7
[   75.575560] wlan0: send auth to 00:3a:98:bf:e8:d7 (try 1/3)
[   75.582219] cfg80211: Calling CRDA for country: CZ
[   75.582910] wlan0: authenticated
[   75.590542] wlan0: associate with 00:3a:98:bf:e8:d7 (try 1/3)
[   75.594602] wlan0: RX AssocResp from 00:3a:98:bf:e8:d7 (capab=0x431 status=0 aid=26)
[   75.601693] wlan0: associated