[    0.000000] microcode: microcode updated early to revision 0x1c, date = 2015-02-26
[    0.000000] Linux version 4.9.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170221 (Debian 6.3.0-8) ) #1 SMP Debian 4.9.13-1 (2017-02-27)
[    0.000000] Command line: BOOT_IMAGE=/@/boot/vmlinuz-4.9.0-2-amd64 root=UUID=a1e06779-c49b-474f-8741-2985199b7d90 ro rootflags=subvol=@ intel_iommu=on rootflags=subvol=@ zswap.enabled=1 zswap.compressor=lz4 zswap.max_pool_percent=50
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff24fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ff25000-0x00000000829fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047c5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Sapphire PURE Platinum H61/PURE Platinum H61, BIOS 4.5-1399-g1bea5b7df2 03/27/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x47c600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 080000000 mask F80000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x7ff25 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff927100099000] 99000 size 24576
[    0.000000] BRK [0x3a932b000, 0x3a932bfff] PGTABLE
[    0.000000] BRK [0x3a932c000, 0x3a932cfff] PGTABLE
[    0.000000] BRK [0x3a932d000, 0x3a932dfff] PGTABLE
[    0.000000] BRK [0x3a932e000, 0x3a932efff] PGTABLE
[    0.000000] BRK [0x3a932f000, 0x3a932ffff] PGTABLE
[    0.000000] BRK [0x3a9330000, 0x3a9330fff] PGTABLE
[    0.000000] BRK [0x3a9331000, 0x3a9331fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3584d000-0x36c1dfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F08B0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x000000007FF3D0E0 000054 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x000000007FF3F9F0 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x000000007FF3D280 002762 (v03 COREv4 COREBOOT 20141018 INTL 20161222)
[    0.000000] ACPI: FACS 0x000000007FF3D240 000040
[    0.000000] ACPI: FACS 0x000000007FF3D240 000040
[    0.000000] ACPI: SSDT 0x000000007FF3FAF0 00279B (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: TCPA 0x000000007FF42290 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x000000007FF422D0 00008C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DMAR 0x000000007FF42360 0000A8 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x000000007FF42410 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000047c5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x47c5ee000-0x47c5f2fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000047c5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007ff24fff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000047c5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000047c5fffff]
[    0.000000] On node 0 totalpages: 4179139
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8125 pages used for memmap
[    0.000000]   DMA32 zone: 519973 pages, LIFO batch:31
[    0.000000]   Normal zone: 57112 pages used for memmap
[    0.000000]   Normal zone: 3655168 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x0000000080a00000-0x00000000829fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ff25000-0x829fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[    0.000000] e820: [mem 0x82a00000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff92757c200000 s103384 r8192 d31784 u262144
[    0.000000] pcpu-alloc: s103384 r8192 d31784 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 4113817
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-4.9.0-2-amd64 root=UUID=a1e06779-c49b-474f-8741-2985199b7d90 ro rootflags=subvol=@ intel_iommu=on rootflags=subvol=@ zswap.enabled=1 zswap.compressor=lz4 zswap.max_pool_percent=50
[    0.000000] DMAR: IOMMU enabled
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16351248K/16716556K available (6142K kernel code, 1129K rwdata, 2844K rodata, 1392K init, 684K bss, 365308K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:488 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3392.137 MHz processor
[    0.000019] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.27 BogoMIPS (lpj=13568548)
[    0.000134] pid_max: default: 32768 minimum: 301
[    0.000202] ACPI: Core revision 20160831
[    0.001840] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.001975] Security Framework initialized
[    0.002031] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.002094] AppArmor: AppArmor disabled by boot time parameter
[    0.002698] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.005642] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.007014] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.007084] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.007389] CPU: Physical Processor ID: 0
[    0.007445] CPU: Processor Core ID: 0
[    0.007505] mce: CPU supports 9 MCE banks
[    0.007569] mce: [Hardware Error]: Machine check events logged
[    0.007630] CPU0: Thermal monitoring enabled (TM1)
[    0.007696] process: using mwait in idle threads
[    0.007754] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.007811] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.008196] Freeing SMP alternatives memory: 24K (ffffffffa8678000 - ffffffffa867e000)
[    0.009711] ftrace: allocating 24999 entries in 98 pages
[    0.018293] smpboot: Max logical packages: 2
[    0.018354] DMAR: Host address width 36
[    0.018409] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.018472] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.018542] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.018601] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.018671] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.018730] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.018787] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.019074] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.019132] x2apic enabled
[    0.019189] Switched APIC routing to cluster x2apic.
[    0.019683] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.059428] TSC deadline timer enabled
[    0.059431] smpboot: CPU0: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.059628] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.059924] ... version:                3
[    0.059979] ... bit width:              48
[    0.060034] ... generic registers:      4
[    0.060090] ... value mask:             0000ffffffffffff
[    0.060147] ... max period:             00007fffffffffff
[    0.060205] ... fixed-purpose events:   3
[    0.060260] ... event mask:             000000070000000f
[    0.060764] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.060909] x86: Booting SMP configuration:
[    0.060965] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.621611] x86: Booted up 1 node, 8 CPUs
[    0.621720] smpboot: Total of 8 processors activated (54281.84 BogoMIPS)
[    0.628142] devtmpfs: initialized
[    0.628250] x86/mm: Memory block size: 128MB
[    0.630905] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.630988] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.631086] pinctrl core: initialized pinctrl subsystem
[    0.631225] NET: Registered protocol family 16
[    0.643730] cpuidle: using governor ladder
[    0.659737] cpuidle: using governor menu
[    0.659835] ACPI: bus type PCI registered
[    0.659892] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.659996] PCI: Using configuration type 1 for base access
[    0.660097] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.679856] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.680094] ACPI: Added _OSI(Module Device)
[    0.680152] ACPI: Added _OSI(Processor Device)
[    0.680208] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.680265] ACPI: Added _OSI(Processor Aggregator Device)
[    0.680428] ACPI: Executed 1 blocks of module-level executable AML code
[    0.682218] ACPI: Interpreter enabled
[    0.682284] ACPI: (supports S0 S3 S4 S5)
[    0.682340] ACPI: Using IOAPIC for interrupt routing
[    0.682413] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.684388] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.684449] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.684522] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.684600] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.684710] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff])
[    0.685508] PCI host bridge to bus 0000:00
[    0.685565] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.685624] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.685684] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.685754] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.685823] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.685892] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.685961] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.686030] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.686098] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.686168] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.686237] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.686306] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.686376] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.686445] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.686514] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.686583] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window]
[    0.686652] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.686722] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.686785] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[    0.686849] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.686870] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.686919] pci 0000:00:02.0: [8086:0162] type 00 class 0x030000
[    0.686926] pci 0000:00:02.0: reg 0x10: [mem 0xe1400000-0xe17fffff 64bit]
[    0.686930] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.686934] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.687038] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.687112] pci 0000:00:16.0: reg 0x10: [mem 0xe1a08000-0xe1a0800f 64bit]
[    0.687433] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.687517] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.687533] pci 0000:00:1a.0: reg 0x10: [mem 0xe1a05000-0xe1a053ff]
[    0.687612] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.687640] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.687730] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.687747] pci 0000:00:1b.0: reg 0x10: [mem 0xe1a00000-0xe1a03fff 64bit]
[    0.687808] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.687835] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.687927] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.688029] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.688053] pci 0000:00:1c.0: Enabling MPC IRBNCE
[    0.688112] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[    0.688218] pci 0000:00:1c.1: [8086:1c18] type 01 class 0x060400
[    0.688284] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.688299] pci 0000:00:1c.1: Enabling MPC IRBNCE
[    0.688357] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled
[    0.688467] pci 0000:00:1c.4: [8086:1c1a] type 01 class 0x060400
[    0.688531] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.688546] pci 0000:00:1c.4: Enabling MPC IRBNCE
[    0.688603] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled
[    0.688714] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.688730] pci 0000:00:1d.0: reg 0x10: [mem 0xe1a06000-0xe1a063ff]
[    0.688808] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.688836] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.688924] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[    0.689072] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[    0.689086] pci 0000:00:1f.2: reg 0x10: [io  0x3060-0x3067]
[    0.689094] pci 0000:00:1f.2: reg 0x14: [io  0x3070-0x3073]
[    0.689102] pci 0000:00:1f.2: reg 0x18: [io  0x3068-0x306f]
[    0.689109] pci 0000:00:1f.2: reg 0x1c: [io  0x3074-0x3077]
[    0.689117] pci 0000:00:1f.2: reg 0x20: [io  0x3040-0x305f]
[    0.689124] pci 0000:00:1f.2: reg 0x24: [mem 0xe1a04000-0xe1a047ff]
[    0.689166] pci 0000:00:1f.2: PME# supported from D3hot
[    0.689217] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.689231] pci 0000:00:1f.3: reg 0x10: [mem 0xe1a07000-0xe1a070ff 64bit]
[    0.689250] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.689334] pci 0000:01:00.0: [10de:1401] type 00 class 0x030000
[    0.689339] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xe0ffffff]
[    0.689345] pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.689350] pci 0000:01:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
[    0.689354] pci 0000:01:00.0: reg 0x24: [io  0x1000-0x107f]
[    0.689357] pci 0000:01:00.0: reg 0x30: [mem 0xe1000000-0xe107ffff pref]
[    0.689400] pci 0000:01:00.1: [10de:0fba] type 00 class 0x040300
[    0.689405] pci 0000:01:00.1: reg 0x10: [mem 0xe1080000-0xe1083fff]
[    0.703762] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.703837] pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
[    0.703838] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe10fffff]
[    0.703840] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.703900] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.704035] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.704069] pci 0000:03:00.0: reg 0x10: [mem 0xe1800000-0xe1807fff 64bit]
[    0.704261] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.719777] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.719851] pci 0000:00:1c.1:   bridge window [mem 0xe1800000-0xe18fffff]
[    0.720051] pci 0000:04:00.0: [11ab:4380] type 00 class 0x020000
[    0.720227] pci 0000:04:00.0: reg 0x10: [mem 0xe1920000-0xe1923fff 64bit]
[    0.720330] pci 0000:04:00.0: reg 0x18: [io  0x2000-0x20ff]
[    0.720689] pci 0000:04:00.0: reg 0x30: [mem 0xe1900000-0xe191ffff pref]
[    0.721128] pci 0000:04:00.0: supports D1 D2
[    0.721128] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.735877] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.735937] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
[    0.735940] pci 0000:00:1c.4:   bridge window [mem 0xe1900000-0xe19fffff]
[    0.736032] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.736616] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.737161] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.737746] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.738287] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.738873] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.739417] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.740008] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.740734] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.740794] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.740864] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    0.740934] vgaarb: loaded
[    0.740987] vgaarb: bridge control possible 0000:01:00.0
[    0.741045] vgaarb: no bridge control possible 0000:00:02.0
[    0.741147] PCI: Using ACPI for IRQ routing
[    0.741204] PCI: pci_cache_line_size set to 64 bytes
[    0.741304] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.741305] e820: reserve RAM buffer [mem 0x7ff25000-0x7fffffff]
[    0.741305] e820: reserve RAM buffer [mem 0x47c600000-0x47fffffff]
[    0.741421] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.741853] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.743928] clocksource: Switched to clocksource hpet
[    0.748545] VFS: Disk quotas dquot_6.6.0
[    0.748620] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.748735] pnp: PnP ACPI init
[    0.748852] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.748912] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.748971] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.749031] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.749090] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.749149] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.749209] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.749269] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.749327] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[    0.749387] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[    0.749448] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.749598] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.749658] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.749687] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.749745] system 00:02: [io  0x0480-0x04bf] has been reserved
[    0.749803] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.749819] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.749832] pnp: PnP ACPI: found 4 devices
[    0.755756] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.755861] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.755918] pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
[    0.755983] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe10fffff]
[    0.756044] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.756114] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.756187] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.756246] pci 0000:00:1c.1:   bridge window [mem 0xe1800000-0xe18fffff]
[    0.756312] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.756370] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
[    0.756431] pci 0000:00:1c.4:   bridge window [mem 0xe1900000-0xe19fffff]
[    0.756497] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.756498] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.756499] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.756500] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.756500] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.756501] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.756502] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.756503] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.756503] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.756504] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.756505] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.756506] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.756506] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.756507] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[    0.756508] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.756509] pci_bus 0000:00: resource 19 [mem 0x82a00000-0xefffffff window]
[    0.756510] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[    0.756510] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.756511] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe10fffff]
[    0.756512] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.756513] pci_bus 0000:03: resource 1 [mem 0xe1800000-0xe18fffff]
[    0.756514] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    0.756514] pci_bus 0000:04: resource 1 [mem 0xe1900000-0xe19fffff]
[    0.756577] NET: Registered protocol family 2
[    0.756774] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.756993] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.757161] TCP: Hash tables configured (established 131072 bind 65536)
[    0.757236] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.757328] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.757448] NET: Registered protocol family 1
[    0.757514] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.758403] PCI: CLS 64 bytes, default 64
[    0.758435] Unpacking initramfs...
[    1.003807] Freeing initrd memory: 20292K (ffff92713584d000 - ffff927136c1e000)
[    1.003911] DMAR: No RMRR found
[    1.003988] DMAR: No ATSR found
[    1.004484] DMAR: dmar0: Using Queued invalidation
[    1.004548] DMAR: dmar1: Using Queued invalidation
[    1.004613] DMAR: Setting RMRR:
[    1.004668] DMAR: Prepare 0-16MiB unity mapping for LPC
[    1.004768] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
[    1.004905] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    1.005016] iommu: Adding device 0000:00:00.0 to group 0
[    1.005083] iommu: Adding device 0000:00:01.0 to group 1
[    1.005147] iommu: Adding device 0000:00:02.0 to group 2
[    1.005211] iommu: Adding device 0000:00:16.0 to group 3
[    1.005274] iommu: Adding device 0000:00:1a.0 to group 4
[    1.005337] iommu: Adding device 0000:00:1b.0 to group 5
[    1.005400] iommu: Adding device 0000:00:1c.0 to group 6
[    1.005462] iommu: Adding device 0000:00:1c.1 to group 7
[    1.005525] iommu: Adding device 0000:00:1c.4 to group 8
[    1.005588] iommu: Adding device 0000:00:1d.0 to group 9
[    1.005655] iommu: Adding device 0000:00:1f.0 to group 10
[    1.005717] iommu: Adding device 0000:00:1f.2 to group 10
[    1.005779] iommu: Adding device 0000:00:1f.3 to group 10
[    1.005840] iommu: Adding device 0000:01:00.0 to group 1
[    1.005900] iommu: Adding device 0000:01:00.1 to group 1
[    1.005964] iommu: Adding device 0000:03:00.0 to group 11
[    1.006026] iommu: Adding device 0000:04:00.0 to group 12
[    1.007482] audit: initializing netlink subsys (disabled)
[    1.007552] audit: type=2000 audit(4082300716.004:1): initialized
[    1.007821] Initialise system trusted keyrings
[    1.007970] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    1.008087] zbud: loaded
[    1.039012] Key type asymmetric registered
[    1.039070] Asymmetric key parser 'x509' registered
[    1.039145] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.039239] io scheduler noop registered
[    1.039296] io scheduler deadline registered
[    1.039361] io scheduler cfq registered (default)
[    1.039763] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.039824] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.039891] intel_idle: MWAIT substates: 0x1120
[    1.039892] intel_idle: v0.4.1 model 0x3A
[    1.040084] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.040621] GHES: HEST is not enabled!
[    1.040717] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.041051] Linux agpgart interface v0.103
[    1.041136] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.041195] AMD IOMMUv2 functionality not available on this system
[    1.041684] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    2.011996] tsc: Refined TSC clocksource calibration: 3392.293 MHz
[    2.012063] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e5de2a436, max_idle_ns: 440795285127 ns
[    2.078306] i8042: No controller found
[    2.078461] mousedev: PS/2 mouse device common for all mice
[    2.078544] rtc_cmos 00:03: RTC can wake from S4
[    2.078734] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    2.078819] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    2.078895] intel_pstate: Intel P-state driver initializing
[    2.079376] ledtrig-cpu: registered to indicate activity on CPUs
[    2.079751] NET: Registered protocol family 10
[    2.080178] mip6: Mobile IPv6
[    2.080242] NET: Registered protocol family 17
[    2.080308] mpls_gso: MPLS GSO support
[    2.080808] microcode: sig=0x306a9, pf=0x2, revision=0x1c
[    2.081000] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    2.081307] registered taskstats version 1
[    2.081371] Loading compiled-in X.509 certificates
[    2.083564] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    2.084047] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    2.088173] zswap: loaded using pool lz4/zbud
[    2.088825] rtc_cmos 00:03: setting system clock to 1999-05-12 20:25:17 UTC (926540717)
[    2.088947] PM: Hibernation image not present or could not be loaded.
[    2.090534] Freeing unused kernel memory: 1392K (ffffffffa851c000 - ffffffffa8678000)
[    2.090618] Write protecting the kernel read-only data: 12288k
[    2.091290] Freeing unused kernel memory: 2032K (ffff9274a8a04000 - ffff9274a8c00000)
[    2.094951] Freeing unused kernel memory: 1252K (ffff9274a8ec7000 - ffff9274a9000000)
[    2.103542] ------------[ cut here ]------------
[    2.103612] WARNING: CPU: 6 PID: 1 at /build/linux-QtSjAP/linux-4.9.13/arch/x86/mm/dump_pagetables.c:226 note_page+0x633/0x7d0
[    2.103700] x86/mm: Found insecure W+X mapping at address ffffffffc00c5000/0xffffffffc00c5000
[    2.103781] Modules linked in: lz4 lz4_compress
[    2.103975] CPU: 6 PID: 1 Comm: swapper/0 Not tainted 4.9.0-2-amd64 #1 Debian 4.9.13-1
[    2.104061] Hardware name: Sapphire PURE Platinum H61/PURE Platinum H61, BIOS 4.5-1399-g1bea5b7df2 03/27/2017
[    2.104147]  0000000000000000 ffffffffa7b28594 ffffa7db818a3dd8 0000000000000000
[    2.104398]  ffffffffa7876dde ffffa7db818a3ed0 ffffa7db818a3e30 0000000000000004
[    2.104650]  0000000000000000 ffffa7db818a3ed0 0000000000000000 ffffffffa7876e5f
[    2.104902] Call Trace:
[    2.104967]  [<ffffffffa7b28594>] ? dump_stack+0x5c/0x78
[    2.105034]  [<ffffffffa7876dde>] ? __warn+0xbe/0xe0
[    2.105100]  [<ffffffffa7876e5f>] ? warn_slowpath_fmt+0x5f/0x80
[    2.105168]  [<ffffffffa7868353>] ? note_page+0x633/0x7d0
[    2.105235]  [<ffffffffa78687c3>] ? ptdump_walk_pgd_level_core+0x2d3/0x3f0
[    2.105304]  [<ffffffffa7ded9e0>] ? rest_init+0x80/0x80
[    2.105370]  [<ffffffffa7deda06>] ? kernel_init+0x26/0x100
[    2.105436]  [<ffffffffa7dfb135>] ? ret_from_fork+0x25/0x30
[    2.105511] ---[ end trace 9ec0eb6f6a708917 ]---
[    2.105603] x86/mm: Checked W+X mappings: FAILED, 3 W+X pages found.
[    2.178432] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.178574] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.178645] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.178717] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.179302] random: udevadm: uninitialized urandom read (16 bytes read)
[    2.179396] random: udevadm: uninitialized urandom read (16 bytes read)
[    2.180513] random: udevadm: uninitialized urandom read (16 bytes read)
[    2.180627] random: udevadm: uninitialized urandom read (16 bytes read)
[    2.180737] random: udevadm: uninitialized urandom read (16 bytes read)
[    2.180846] random: udevadm: uninitialized urandom read (16 bytes read)
[    2.198312] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    2.203162] sky2: driver version 1.30
[    2.203836] sky2 0000:04:00.0: Yukon-2 UL 2 chip revision 0
[    2.204275] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    2.205360] sky2 0000:04:00.0 eth0: addr dc:9c:52:07:d2:6b
[    2.206631] SCSI subsystem initialized
[    2.208328] ACPI: bus type USB registered
[    2.208413] usbcore: registered new interface driver usbfs
[    2.208491] usbcore: registered new interface driver hub
[    2.208579] usbcore: registered new device driver usb
[    2.210631] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.211225] ehci-pci: EHCI PCI platform driver
[    2.211455] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    2.211525] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.211619] ehci-pci 0000:00:1a.0: debug port 2
[    2.212696] libata version 3.00 loaded.
[    2.213820] AVX version of gcm_enc/dec engaged.
[    2.213905] AES CTR mode by8 optimization enabled
[    2.215628] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    2.215646] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe1a05000
[    2.228029] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.228384] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.228445] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.228515] usb usb1: Product: EHCI Host Controller
[    2.228573] usb usb1: Manufacturer: Linux 4.9.0-2-amd64 ehci_hcd
[    2.228632] usb usb1: SerialNumber: 0000:00:1a.0
[    2.228879] hub 1-0:1.0: USB hub found
[    2.228951] hub 1-0:1.0: 3 ports detected
[    2.229309] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    2.229386] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[    2.239211] xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[    2.239516] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.239576] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.239644] usb usb2: Product: xHCI Host Controller
[    2.239701] usb usb2: Manufacturer: Linux 4.9.0-2-amd64 xhci-hcd
[    2.239758] usb usb2: SerialNumber: 0000:03:00.0
[    2.239923] hub 2-0:1.0: USB hub found
[    2.240007] hub 2-0:1.0: 2 ports detected
[    2.240132] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    2.240155] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    2.240160] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    2.240172] ehci-pci 0000:00:1d.0: debug port 2
[    2.240474] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[    2.240619] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.240750] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    2.240841] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.240951] usb usb4: Product: xHCI Host Controller
[    2.241034] usb usb4: Manufacturer: Linux 4.9.0-2-amd64 xhci-hcd
[    2.241122] usb usb4: SerialNumber: 0000:03:00.0
[    2.241373] hub 4-0:1.0: USB hub found
[    2.241468] hub 4-0:1.0: 2 ports detected
[    2.244130] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    2.244293] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe1a06000
[    2.260039] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.260142] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.260202] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.260270] usb usb3: Product: EHCI Host Controller
[    2.260327] usb usb3: Manufacturer: Linux 4.9.0-2-amd64 ehci_hcd
[    2.260385] usb usb3: SerialNumber: 0000:00:1d.0
[    2.260618] hub 3-0:1.0: USB hub found
[    2.260680] hub 3-0:1.0: 3 ports detected
[    2.260883] ahci 0000:00:1f.2: version 3.0
[    2.261013] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    2.271214] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    2.271287] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    2.271978] scsi host0: ahci
[    2.272257] scsi host1: ahci
[    2.272549] scsi host2: ahci
[    2.272845] scsi host3: ahci
[    2.273049] scsi host4: ahci
[    2.273179] scsi host5: ahci
[    2.273275] ata1: SATA max UDMA/133 abar m2048@0xe1a04000 port 0xe1a04100 irq 35
[    2.273350] ata2: SATA max UDMA/133 abar m2048@0xe1a04000 port 0xe1a04180 irq 35
[    2.273423] ata3: DUMMY
[    2.273477] ata4: DUMMY
[    2.273531] ata5: SATA max UDMA/133 abar m2048@0xe1a04000 port 0xe1a04300 irq 35
[    2.273600] ata6: SATA max UDMA/133 abar m2048@0xe1a04000 port 0xe1a04380 irq 35
[    2.556050] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.586676] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.588050] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    2.601468] ata1.00: ATA-8: KINGSTON SH103S3120G, 526ABBF0, max UDMA/133
[    2.601539] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.613804] ata1.00: configured for UDMA/133
[    2.614270] scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SH103S3 BBF0 PQ: 0 ANSI: 5
[    2.628053] usb 2-1: new low-speed USB device number 2 using xhci_hcd
[    2.704453] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.704523] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.704993] hub 1-1:1.0: USB hub found
[    2.705145] hub 1-1:1.0: 4 ports detected
[    2.736734] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[    2.736803] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.737246] hub 3-1:1.0: USB hub found
[    2.737434] hub 3-1:1.0: 6 ports detected
[    2.836047] usb 2-1: New USB device found, idVendor=046d, idProduct=c077
[    2.836119] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.836189] usb 2-1: Product: USB Optical Mouse
[    2.836253] usb 2-1: Manufacturer: Logitech
[    2.841912] hidraw: raw HID events driver (C) Jiri Kosina
[    2.845152] usbcore: registered new interface driver usbhid
[    2.845216] usbhid: USB HID core driver
[    2.846355] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1c.1/0000:03:00.0/usb2/2-1/2-1:1.0/0003:046D:C077.0001/input/input0
[    2.846545] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:03:00.0-1/input0
[    2.974827] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.989482] ata2.00: ATA-8: KINGSTON SH103S3120G, 526ABBF0, max UDMA/133
[    2.989552] ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.999357] ata2.00: configured for UDMA/133
[    2.999770] scsi 1:0:0:0: Direct-Access     ATA      KINGSTON SH103S3 BBF0 PQ: 0 ANSI: 5
[    3.016084] usb 2-2: new low-speed USB device number 3 using xhci_hcd
[    3.024077] usb 3-1.2: new high-speed USB device number 3 using ehci-pci
[    3.036234] clocksource: Switched to clocksource tsc
[    3.205596] usb 3-1.2: New USB device found, idVendor=046d, idProduct=082b
[    3.205666] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.205744] usb 3-1.2: Product: Webcam C170
[    3.206590] usb 3-1.2: Manufacturer:  
[    3.227565] usb 2-2: New USB device found, idVendor=0518, idProduct=0001
[    3.227635] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.227702] usb 2-2: Product: USB-compliant keyboard
[    3.227766] usb 2-2: Manufacturer: Plus More Enterprise LTD.
[    3.232004] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1c.1/0000:03:00.0/usb2/2-2/2-2:1.0/0003:0518:0001.0002/input/input1
[    3.288072] usb 3-1.3: new high-speed USB device number 4 using ehci-pci
[    3.292327] hid-generic 0003:0518:0001.0002: input,hidraw1: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:03:00.0-2/input0
[    3.295569] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1c.1/0000:03:00.0/usb2/2-2/2-2:1.1/0003:0518:0001.0003/input/input2
[    3.350521] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.352328] hid-generic 0003:0518:0001.0003: input,hidraw2: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:03:00.0-2/input1
[    3.357099] ata5.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
[    3.357170] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    3.363795] ata5.00: configured for UDMA/133
[    3.364150] scsi 4:0:0:0: Direct-Access     ATA      SAMSUNG HD502HI  1118 PQ: 0 ANSI: 5
[    3.396728] usb 3-1.3: New USB device found, idVendor=1a40, idProduct=0101
[    3.396799] usb 3-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.396877] usb 3-1.3: Product: USB 2.0 Hub
[    3.397221] hub 3-1.3:1.0: USB hub found
[    3.397417] hub 3-1.3:1.0: 4 ports detected
[    3.476110] usb 3-1.5: new full-speed USB device number 5 using ehci-pci
[    3.556112] usb 3-1.5: device descriptor read/64, error -32
[    3.722518] ata6: SATA link down (SStatus 0 SControl 300)
[    3.726349] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    3.726416] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    3.726587] sd 1:0:0:0: [sdb] Write Protect is off
[    3.726642] sd 0:0:0:0: [sda] Write Protect is off
[    3.726646] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.726674] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.726761] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    3.726808] sd 4:0:0:0: [sdc] Write Protect is off
[    3.726812] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    3.726832] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.727104] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.727152] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.729911]  sda: sda1 sda2 sda3 sda4
[    3.730527] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.730683]  sdb: sdb1 sdb2 sdb3 sdb4
[    3.731333] sd 1:0:0:0: [sdb] Attached SCSI disk
[    3.745307] random: fast init done
[    3.769157]  sdc: sdc1 sdc2
[    3.769767] sd 4:0:0:0: [sdc] Attached SCSI disk
[    3.773133] usb 3-1.5: New USB device found, idVendor=0cf3, idProduct=3005
[    3.773201] usb 3-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.091778] VFIO - User Level meta-driver version: 0.3
[    4.095084] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=io+mem:owns=none
[    4.112131] vfio_pci: add [10de:1401[ffff:ffff]] class 0x000000/00000000
[    4.132180] vfio_pci: add [10de:0fba[ffff:ffff]] class 0x000000/00000000
[    4.216095] raid6: sse2x1   gen()  5613 MB/s
[    4.284098] raid6: sse2x1   xor()  5527 MB/s
[    4.352097] raid6: sse2x2   gen() 10895 MB/s
[    4.420109] raid6: sse2x2   xor()  9055 MB/s
[    4.488113] raid6: sse2x4   gen() 15445 MB/s
[    4.556112] raid6: sse2x4   xor() 11437 MB/s
[    4.556192] raid6: using algorithm sse2x4 gen() 15445 MB/s
[    4.556248] raid6: .... xor() 11437 MB/s, rmw enabled
[    4.556305] raid6: using ssse3x2 recovery algorithm
[    4.556865] xor: automatically using best checksumming function   avx       
[    4.567684] Btrfs loaded, crc32c=crc32c-intel
[    4.627330] BTRFS: device label data devid 1 transid 7566 /dev/sdc1
[    4.627531] BTRFS: device fsid a1e06779-c49b-474f-8741-2985199b7d90 devid 1 transid 3444 /dev/sda4
[    4.630274] PM: Starting manual resume from disk
[    4.630344] PM: Hibernation image partition 8:34 present
[    4.630345] PM: Looking for hibernation image.
[    4.630542] PM: Image not found (code -22)
[    4.630544] PM: Hibernation image not present or could not be loaded.
[    4.641969] BTRFS info (device sda4): disk space caching is enabled
[    4.642051] BTRFS info (device sda4): has skinny extents
[    4.670136] BTRFS info (device sda4): detected SSD devices, enabling SSD mode
[    4.784464] systemd[1]: System time before build time, advancing clock.
[    4.804977] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.809206] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    4.809520] systemd[1]: Detected architecture x86-64.
[    4.811277] systemd[1]: Set hostname to <debianDesktop>.
[    4.869301] systemd[1]: iodined.service: Cannot add dependency job, ignoring: Unit iodined.service is masked.
[    4.870073] systemd[1]: Listening on LVM2 metadata daemon socket.
[    4.870531] systemd[1]: Listening on udev Control Socket.
[    4.870932] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.871341] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    4.871723] systemd[1]: Listening on RPCbind Server Activation Socket.
[    4.872203] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.889084] BTRFS info (device sda4): disk space caching is enabled
[    4.904876] lp: driver loaded but no devices found
[    4.906696] ppdev: user-space parallel port driver
[    4.913920] f71882fg: Found f71808a chip at 0x290, revision 33
[    4.914079] f71882fg f71882fg.656: Fan: 1 is in duty-cycle mode
[    4.914084] f71882fg f71882fg.656: Auto pwm controlled by raw digital data, disabling pwm auto_point sysfs attributes for fan 1
[    4.914090] f71882fg f71882fg.656: Fan: 2 is in duty-cycle mode
[    4.939746] systemd-journald[329]: Received request to flush runtime journal from PID 1
[    4.961385] systemd-journald[329]: File /var/log/journal/2717776cc902423fbc33fc2a5b787d45/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    5.030195] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.030223] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    5.030226] ACPI: Power Button [PWRF]
[    5.030437] EDAC MC: Ver: 3.0.0
[    5.032239] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    5.035232] EDAC ie31200: No ECC support
[    5.044237] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20160831/utaddress-247)
[    5.044393] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.044461] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[    5.044629] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.044696] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[    5.044861] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.044935] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[    5.045111] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.045185] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    5.045781] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.045882] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    5.045981] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    5.046086] [drm] Initialized
[    5.122329] wmi: Mapper loaded
[    5.125432] [drm] Memory usable by graphics device = 2048M
[    5.125484] [drm] VT-d active for gfx access
[    5.125533] [drm] Replacing VGA console driver
[    5.126054] Console: switching to colour dummy device 80x25
[    5.126392] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    5.126393] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    5.126393] RAPL PMU: hw unit of domain package 2^-16 Joules
[    5.126394] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    5.126489] [drm] DMAR active, disabling use of stolen memory
[    5.126691] media: Linux media interface: v0.10
[    5.138367] Linux video capture interface: v2.00
[    5.139482] iTCO_vendor_support: vendor-support=0
[    5.141047] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    5.141074] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[    5.149322] Adding 16778236k swap on /dev/sdc2.  Priority:-1 extents:1 across:16778236k FS
[    5.151890] Bluetooth: Core ver 2.22
[    5.151902] NET: Registered protocol family 31
[    5.151904] Bluetooth: HCI device and connection manager initialized
[    5.151908] Bluetooth: HCI socket layer initialized
[    5.151912] Bluetooth: L2CAP socket layer initialized
[    5.151918] Bluetooth: SCO socket layer initialized
[    5.158721] usbcore: registered new interface driver snd-usb-audio
[    5.158722] uvcvideo: Found UVC 1.00 device Webcam C170 (046d:082b)
[    5.163018] uvcvideo 3-1.2:1.0: Entity type for entity Processing 2 was not initialized!
[    5.163024] uvcvideo 3-1.2:1.0: Entity type for entity Extension 6 was not initialized!
[    5.163027] uvcvideo 3-1.2:1.0: Entity type for entity Camera 1 was not initialized!
[    5.163077] input: Webcam C170 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input5
[    5.163119] usbcore: registered new interface driver uvcvideo
[    5.163121] USB Video Class driver (1.1.1)
[    5.175981] usbcore: registered new interface driver btusb
[    5.184187] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.184191] [drm] Driver supports precise vblank timestamp query.
[    5.184363] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=io+mem:owns=none
[    5.184368] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    5.188094] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    5.188478] acpi device:03: registered as cooling_device8
[    5.188522] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    5.188565] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    5.206752] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    5.206759] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.206763] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    5.206767] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
[    5.206769] snd_hda_codec_realtek hdaudioC0D2:    dig-out=0x1e/0x0
[    5.206772] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[    5.206775] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
[    5.206777] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
[    5.206780] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
[    5.226461] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.229511] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    5.229579] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    5.229642] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    5.229704] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    5.229766] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    5.229827] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    5.229888] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    5.229947] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    5.230009] fbcon: inteldrmfb (fb0) is primary device
[    5.230029] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    5.230412] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    5.234781] intel_rapl: Found RAPL domain package
[    5.234782] intel_rapl: Found RAPL domain core
[    5.234783] intel_rapl: Found RAPL domain uncore
[    5.283558] Console: switching to colour frame buffer device 240x67
[    5.303151] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    5.482693] BTRFS info (device sdc1): disk space caching is enabled
[    5.482767] BTRFS info (device sdc1): has skinny extents
[    6.412610] random: crng init done
[    6.648563] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.648564] Bluetooth: BNEP filters: protocol multicast
[    6.648567] Bluetooth: BNEP socket layer initialized
[    6.865820] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.870309] sky2 0000:04:00.0 eth0: enabling interface
[    6.871464] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.944306] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    7.958955] Ebtables v2.0 registered
[    9.369681] sky2 0000:04:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both
[    9.371292] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   17.232716] usb 3-1.2: reset high-speed USB device number 3 using ehci-pci
[   17.465553] Bluetooth: RFCOMM TTY layer initialized
[   17.465562] Bluetooth: RFCOMM socket layer initialized
[   17.465568] Bluetooth: RFCOMM ver 1.11
[   22.659099] fuse init (API version 7.26)
[  300.009714] mce: [Hardware Error]: Machine check events logged