touch: 缺少了文件操作数
Try 'touch --help' for more information.
[    0.000000] Linux version 4.9.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170221 (Debian 6.3.0-8) ) #1 SMP Debian 4.9.13-1 (2017-02-27)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.0-2-amd64 root=UUID=a994a1c5-a911-48bd-a468-4aa6a9728001 ro quiet iomem=relaxed
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000acf1cfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000acf1d000-0x00000000acffffff] type 16
[    0.000000] BIOS-e820: [mem 0x00000000ad000000-0x00000000af9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002cfdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: SAMSUNG Lumpy/Lumpy, BIOS 4.5-1206-g589fc3473e 03/10/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x2cfe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0AD000000 mask FFF000000 uncachable
[    0.000000]   1 base 0AE000000 mask FFE000000 uncachable
[    0.000000]   2 base 0B0000000 mask FF0000000 uncachable
[    0.000000]   3 base 0C0000000 mask FF0000000 uncachable
[    0.000000]   4 base 0D0000000 mask FF0000000 write-combining
[    0.000000]   5 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0xacf1d max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f6310-0x000f631f] mapped at [ffff97f7400f6310]
[    0.000000] Base memory trampoline at [ffff97f740099000] 99000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x25972b000, 0x25972bfff] PGTABLE
[    0.000000] BRK [0x25972c000, 0x25972cfff] PGTABLE
[    0.000000] BRK [0x25972d000, 0x25972dfff] PGTABLE
[    0.000000] BRK [0x25972e000, 0x25972efff] PGTABLE
[    0.000000] BRK [0x25972f000, 0x25972ffff] PGTABLE
[    0.000000] BRK [0x259730000, 0x259730fff] PGTABLE
[    0.000000] BRK [0x259731000, 0x259731fff] PGTABLE
[    0.000000] BRK [0x259732000, 0x259732fff] PGTABLE
[    0.000000] BRK [0x259733000, 0x259733fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3582b000-0x36c0cfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F64B0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000ACF310E0 000054 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000ACF345E0 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000ACF31280 003351 (v02 COREv4 COREBOOT 20110725 INTL 20161222)
[    0.000000] ACPI: FACS 0x00000000ACF31240 000040
[    0.000000] ACPI: FACS 0x00000000ACF31240 000040
[    0.000000] ACPI: SSDT 0x00000000ACF346E0 000A5E (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: MCFG 0x00000000ACF35140 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: TCPA 0x00000000ACF35180 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x00000000ACF351C0 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000ACF35220 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000002cfdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x2cfdf5000-0x2cfdf9fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000002cfdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x00000000acf1cfff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000002cfdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000002cfdfffff]
[    0.000000] On node 0 totalpages: 2607292
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 159 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10989 pages used for memmap
[    0.000000]   DMA32 zone: 703261 pages, LIFO batch:31
[    0.000000]   Normal zone: 29688 pages used for memmap
[    0.000000]   Normal zone: 1900032 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000ada00000-0x00000000af9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xacf1d000-0xacffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xad000000-0xaf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
[    0.000000] e820: [mem 0xafa00000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff97fa0fa00000 s103384 r8192 d31784 u1048576
[    0.000000] pcpu-alloc: s103384 r8192 d31784 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2566392
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-2-amd64 root=UUID=a994a1c5-a911-48bd-a468-4aa6a9728001 ro quiet iomem=relaxed
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 10162416K/10429168K available (6142K kernel code, 1129K rwdata, 2844K rodata, 1392K init, 684K bss, 266752K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.000000] NR_IRQS:33024 nr_irqs:440 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1297.089 MHz processor
[    0.000046] Calibrating delay loop (skipped), value calculated using timer frequency.. 2594.17 BogoMIPS (lpj=5188356)
[    0.000050] pid_max: default: 32768 minimum: 301
[    0.000076] ACPI: Core revision 20160831
[    0.004844] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.004923] Security Framework initialized
[    0.004926] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.004933] AppArmor: AppArmor disabled by boot time parameter
[    0.006531] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.012418] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.014978] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.015006] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.015558] CPU: Physical Processor ID: 0
[    0.015560] CPU: Processor Core ID: 0
[    0.015568] mce: CPU supports 7 MCE banks
[    0.015582] CPU0: Thermal monitoring enabled (TM1)
[    0.015598] process: using mwait in idle threads
[    0.015602] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.015604] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.016325] Freeing SMP alternatives memory: 24K (ffffffff8e478000 - ffffffff8e47e000)
[    0.025763] ftrace: allocating 24999 entries in 98 pages
[    0.048152] smpboot: Max logical packages: 1
[    0.048232] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.048659] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.088352] TSC deadline timer enabled
[    0.088356] smpboot: CPU0: Intel(R) Celeron(R) CPU 867 @ 1.30GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.088363] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.088409] ... version:                3
[    0.088410] ... bit width:              48
[    0.088411] ... generic registers:      8
[    0.088412] ... value mask:             0000ffffffffffff
[    0.088413] ... max period:             00007fffffffffff
[    0.088414] ... fixed-purpose events:   3
[    0.088415] ... event mask:             00000007000000ff
[    0.089354] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.089554] x86: Booting SMP configuration:
[    0.089555] .... node  #0, CPUs:      #1
[    0.170535] x86: Booted up 1 node, 2 CPUs
[    0.170538] smpboot: Total of 2 processors activated (5189.25 BogoMIPS)
[    0.172708] devtmpfs: initialized
[    0.172839] x86/mm: Memory block size: 128MB
[    0.178483] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.178493] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.178546] pinctrl core: initialized pinctrl subsystem
[    0.178749] NET: Registered protocol family 16
[    0.190467] cpuidle: using governor ladder
[    0.202472] cpuidle: using governor menu
[    0.202538] ACPI: bus type PCI registered
[    0.202541] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.202667] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.202670] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.202684] PCI: Using configuration type 1 for base access
[    0.202835] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.202848] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.214754] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.215100] ACPI: Added _OSI(Module Device)
[    0.215101] ACPI: Added _OSI(Processor Device)
[    0.215103] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.215104] ACPI: Added _OSI(Processor Aggregator Device)
[    0.215327] ACPI: Executed 1 blocks of module-level executable AML code
[    0.218627] ACPI : EC: EC started
[    0.306636] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.306640] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.306642] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.306643] ACPI: Interpreter enabled
[    0.306681] ACPI: (supports S0 S3 S4 S5)
[    0.306682] ACPI: Using IOAPIC for interrupt routing
[    0.306721] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.326582] ACPI: Power Resource [FNP0] (off)
[    0.342590] ACPI: Power Resource [FNP1] (off)
[    0.358600] ACPI: Power Resource [FNP2] (off)
[    0.374611] ACPI: Power Resource [FNP3] (off)
[    0.390622] ACPI: Power Resource [FNP4] (off)
[    0.505085] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.505092] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.505186] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.505204] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.505303] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cedff])
[    0.505564] PCI host bridge to bus 0000:00
[    0.505567] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.505570] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.505572] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.505574] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.505576] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.505578] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.505580] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.505582] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.505584] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.505587] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.505589] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.505591] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.505593] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.505595] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.505597] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.505599] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xefffffff window]
[    0.505601] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.505604] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.505617] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.505781] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.505832] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.505962] pci 0000:00:02.0: [8086:0106] type 00 class 0x030000
[    0.505978] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
[    0.505987] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.505994] pci 0000:00:02.0: reg 0x20: [io  0x2000-0x203f]
[    0.506139] pci 0000:00:04.0: [8086:0103] type 00 class 0x118000
[    0.506153] pci 0000:00:04.0: reg 0x10: [mem 0xe0600000-0xe0607fff 64bit]
[    0.506369] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.506452] pci 0000:00:16.0: reg 0x10: [mem 0xe0611000-0xe061100f 64bit]
[    0.506816] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.506986] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.507016] pci 0000:00:1a.0: reg 0x10: [mem 0xe060e000-0xe060e3ff]
[    0.507163] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.507234] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.507314] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.507345] pci 0000:00:1b.0: reg 0x10: [mem 0xe0608000-0xe060bfff 64bit]
[    0.507486] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.507562] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.507635] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.507773] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.507920] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.508057] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.508208] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.508237] pci 0000:00:1d.0: reg 0x10: [mem 0xe060f000-0xe060f3ff]
[    0.508384] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.508457] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.508529] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.508815] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.508846] pci 0000:00:1f.2: reg 0x10: [io  0x2060-0x2067]
[    0.508862] pci 0000:00:1f.2: reg 0x14: [io  0x2070-0x2073]
[    0.508877] pci 0000:00:1f.2: reg 0x18: [io  0x2068-0x206f]
[    0.508893] pci 0000:00:1f.2: reg 0x1c: [io  0x2074-0x2077]
[    0.508909] pci 0000:00:1f.2: reg 0x20: [io  0x2040-0x205f]
[    0.508924] pci 0000:00:1f.2: reg 0x24: [mem 0xe060d000-0xe060d7ff]
[    0.509011] pci 0000:00:1f.2: PME# supported from D3hot
[    0.509143] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.509173] pci 0000:00:1f.3: reg 0x10: [mem 0xe0610000-0xe06100ff 64bit]
[    0.509215] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.509380] pci 0000:00:1f.6: [8086:1c24] type 00 class 0x118000
[    0.509413] pci 0000:00:1f.6: reg 0x10: [mem 0xe060c000-0xe060cfff 64bit]
[    0.509676] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.509810] pci 0000:02:00.0: [168c:0030] type 00 class 0x028000
[    0.509884] pci 0000:02:00.0: reg 0x10: [mem 0xe0400000-0xe041ffff 64bit]
[    0.510039] pci 0000:02:00.0: reg 0x30: [mem 0xe0420000-0xe042ffff pref]
[    0.510234] pci 0000:02:00.0: supports D1
[    0.510236] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[    0.522735] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.522749] pci 0000:00:1c.0:   bridge window [mem 0xe0400000-0xe04fffff]
[    0.522881] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.522914] pci 0000:03:00.0: reg 0x10: [io  0x1000-0x10ff]
[    0.522963] pci 0000:03:00.0: reg 0x18: [mem 0xe0504000-0xe0504fff 64bit pref]
[    0.522993] pci 0000:03:00.0: reg 0x20: [mem 0xe0500000-0xe0503fff 64bit pref]
[    0.523145] pci 0000:03:00.0: supports D1 D2
[    0.523147] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.534733] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.534741] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
[    0.534759] pci 0000:00:1c.3:   bridge window [mem 0xe0500000-0xe05fffff 64bit pref]
[    0.534973] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.535062] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.535147] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.535230] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.535313] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.535395] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.535476] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.535558] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.631474] ACPI : EC: event unblocked
[    0.631482] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.631485] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.631662] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.631664] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.631668] vgaarb: loaded
[    0.631669] vgaarb: bridge control possible 0000:00:02.0
[    0.631803] PCI: Using ACPI for IRQ routing
[    0.635429] PCI: pci_cache_line_size set to 64 bytes
[    0.635519] e820: reserve RAM buffer [mem 0xacf1d000-0xafffffff]
[    0.635521] e820: reserve RAM buffer [mem 0x2cfe00000-0x2cfffffff]
[    0.635781] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.635791] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.637823] clocksource: Switched to clocksource hpet
[    0.648845] VFS: Disk quotas dquot_6.6.0
[    0.648883] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.649022] pnp: PnP ACPI init
[    0.649188] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.649192] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.649194] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.649197] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.649200] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.649202] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.649205] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.649207] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.649210] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
[    0.649213] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
[    0.649218] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.650898] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.650903] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.650978] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.650981] system 00:02: [io  0x0480-0x04bf] has been reserved
[    0.650985] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.651027] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.651176] system 00:04: [io  0x0b00-0x0b07] has been reserved
[    0.651180] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.651302] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.651424] system 00:06: [io  0x0a00-0x0a33] has been reserved
[    0.651428] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.651457] pnp: PnP ACPI: found 7 devices
[    0.659308] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.659356] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.659367] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.659375] pci 0000:00:1c.0:   bridge window [mem 0xe0400000-0xe04fffff]
[    0.659389] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.659393] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
[    0.659406] pci 0000:00:1c.3:   bridge window [mem 0xe0500000-0xe05fffff 64bit pref]
[    0.659417] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.659420] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.659422] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.659425] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.659427] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.659429] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.659431] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.659434] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.659436] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.659438] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.659440] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.659442] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.659444] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.659447] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[    0.659449] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.659451] pci_bus 0000:00: resource 19 [mem 0xafa00000-0xefffffff window]
[    0.659453] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[    0.659456] pci_bus 0000:02: resource 1 [mem 0xe0400000-0xe04fffff]
[    0.659459] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.659461] pci_bus 0000:03: resource 2 [mem 0xe0500000-0xe05fffff 64bit pref]
[    0.659606] NET: Registered protocol family 2
[    0.659926] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.660348] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.660574] TCP: Hash tables configured (established 131072 bind 65536)
[    0.660630] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.660726] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.660885] NET: Registered protocol family 1
[    0.660913] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.661534] PCI: CLS 64 bytes, default 64
[    0.661621] Unpacking initramfs...
[    1.334979] Freeing initrd memory: 20360K (ffff97f77582b000 - ffff97f776c0d000)
[    1.334984] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.334988] software IO TLB [mem 0xa8f1d000-0xacf1d000] (64MB) mapped at [ffff97f7e8f1d000-ffff97f7ecf1cfff]
[    1.335557] audit: initializing netlink subsys (disabled)
[    1.335585] audit: type=2000 audit(1490187434.324:1): initialized
[    1.336132] Initialise system trusted keyrings
[    1.336266] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    1.336300] zbud: loaded
[    1.425976] Key type asymmetric registered
[    1.425978] Asymmetric key parser 'x509' registered
[    1.426007] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.426044] io scheduler noop registered
[    1.426045] io scheduler deadline registered
[    1.426069] io scheduler cfq registered (default)
[    1.426296] pcieport 0000:00:01.0: can't derive routing for PCI INT A
[    1.426299] pcieport 0000:00:01.0: PCI INT A: no GSI
[    1.427051] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    1.427056] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded
[    1.427096] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    1.427098] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.427103] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[    1.427134] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    1.427136] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.427142] pcie_pme 0000:00:1c.3:pcie001: service driver pcie_pme loaded
[    1.427160] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.427170] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.427194] intel_idle: MWAIT substates: 0x21120
[    1.427196] intel_idle: v0.4.1 model 0x2A
[    1.427343] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.427676] GHES: HEST is not enabled!
[    1.427767] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.428525] Linux agpgart interface v0.103
[    1.428600] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.428601] AMD IOMMUv2 functionality not available on this system
[    1.428969] i8042: PNP: PS/2 Controller [PNP0303:SKBC] at 0x60,0x64 irq 1
[    1.428970] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.431546] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.431845] mousedev: PS/2 mouse device common for all mice
[    1.432557] rtc_cmos 00:03: RTC can wake from S4
[    1.432821] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.432861] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.432882] intel_pstate: Intel P-state driver initializing
[    1.433136] ledtrig-cpu: registered to indicate activity on CPUs
[    1.433624] NET: Registered protocol family 10
[    1.434202] mip6: Mobile IPv6
[    1.434208] NET: Registered protocol family 17
[    1.434231] mpls_gso: MPLS GSO support
[    1.434713] microcode: sig=0x206a7, pf=0x10, revision=0x29
[    1.434871] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.435212] registered taskstats version 1
[    1.435216] Loading compiled-in X.509 certificates
[    1.439092] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    1.439983] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    1.440024] zswap: loaded using pool lzo/zbud
[    1.440781] rtc_cmos 00:03: setting system clock to 2017-03-22 12:57:14 UTC (1490187434)
[    1.440905] PM: Hibernation image not present or could not be loaded.
[    1.444592] Freeing unused kernel memory: 1392K (ffffffff8e31c000 - ffffffff8e478000)
[    1.444595] Write protecting the kernel read-only data: 12288k
[    1.445915] Freeing unused kernel memory: 2032K (ffff97f998e04000 - ffff97f999000000)
[    1.453487] Freeing unused kernel memory: 1252K (ffff97f9992c7000 - ffff97f999400000)
[    1.468529] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.476394] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.637818] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.637946] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.637965] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.637985] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.639347] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.639402] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.641446] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.641472] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.642007] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.642103] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.700522] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.701632] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffa668c18a5000, e8:03:9a:ee:70:3a, XID 0c900800 IRQ 27
[    1.701635] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.707001] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.711777] ACPI: bus type USB registered
[    1.711817] usbcore: registered new interface driver usbfs
[    1.711834] usbcore: registered new interface driver hub
[    1.712575] SCSI subsystem initialized
[    1.713107] usbcore: registered new device driver usb
[    1.719410] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.722144] ehci-pci: EHCI PCI platform driver
[    1.725690] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    1.728071] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.728082] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.728101] ehci-pci 0000:00:1a.0: debug port 2
[    1.730382] libata version 3.00 loaded.
[    1.732031] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.732089] ehci-pci 0000:00:1a.0: irq 17, io mem 0xe060e000
[    1.745825] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.745912] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.745915] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.745917] usb usb1: Product: EHCI Host Controller
[    1.745919] usb usb1: Manufacturer: Linux 4.9.0-2-amd64 ehci_hcd
[    1.745921] usb usb1: SerialNumber: 0000:00:1a.0
[    1.746157] hub 1-0:1.0: USB hub found
[    1.746169] hub 1-0:1.0: 3 ports detected
[    1.746586] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.746596] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.746613] ehci-pci 0000:00:1d.0: debug port 2
[    1.750522] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.750607] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe060f000
[    1.768380] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.777719] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.777723] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.777726] usb usb2: Product: EHCI Host Controller
[    1.777728] usb usb2: Manufacturer: Linux 4.9.0-2-amd64 ehci_hcd
[    1.777730] usb usb2: SerialNumber: 0000:00:1d.0
[    1.779116] hub 2-0:1.0: USB hub found
[    1.779343] hub 2-0:1.0: 3 ports detected
[    1.787908] ahci 0000:00:1f.2: version 3.0
[    1.788186] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.788219] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[    1.788222] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    1.796204] scsi host0: ahci
[    1.797999] scsi host1: ahci
[    1.798193] scsi host2: ahci
[    1.798360] scsi host3: ahci
[    1.798496] scsi host4: ahci
[    1.798626] scsi host5: ahci
[    1.798716] ata1: SATA max UDMA/133 abar m2048@0xe060d000 port 0xe060d100 irq 28
[    1.798718] ata2: DUMMY
[    1.798719] ata3: DUMMY
[    1.798720] ata4: DUMMY
[    1.798721] ata5: DUMMY
[    1.798722] ata6: DUMMY
[    1.811211] thermal LNXTHERM:00: registered as thermal_zone0
[    1.811213] ACPI: Thermal Zone [THRM] (56 C)
[    2.073906] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.105919] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.114000] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.114440] ata1.00: ATA-9: TOSHIBA THNSNH256GMCT, HTLAN102, max UDMA/100
[    2.114446] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.115564] ata1.00: configured for UDMA/100
[    2.116185] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA THNSNH25 N102 PQ: 0 ANSI: 5
[    2.155211] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    2.155332] sd 0:0:0:0: [sda] Write Protect is off
[    2.155337] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.155374] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.157365]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10
[    2.158620] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.181995] random: fast init done
[    2.218914] md: linear personality registered for level -1
[    2.222389] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.222393] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.222904] md: multipath personality registered for level -4
[    2.223546] hub 1-1:1.0: USB hub found
[    2.223814] hub 1-1:1.0: 6 ports detected
[    2.226191] md: raid0 personality registered for level 0
[    2.230190] md: raid1 personality registered for level 1
[    2.301793] raid6: sse2x1   gen()  3479 MB/s
[    2.369787] raid6: sse2x1   xor()  2645 MB/s
[    2.437792] raid6: sse2x2   gen()  4329 MB/s
[    2.505783] raid6: sse2x2   xor()  3145 MB/s
[    2.573779] raid6: sse2x4   gen()  5031 MB/s
[    2.641775] raid6: sse2x4   xor()  3752 MB/s
[    2.641777] raid6: using algorithm sse2x4 gen() 5031 MB/s
[    2.641778] raid6: .... xor() 3752 MB/s, rmw enabled
[    2.641780] raid6: using ssse3x2 recovery algorithm
[    2.641870] tsc: Refined TSC clocksource calibration: 1297.054 MHz
[    2.641877] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x12b23f195a8, max_idle_ns: 440795266287 ns
[    2.643050] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.643056] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.643580] hub 2-1:1.0: USB hub found
[    2.643663] xor: measuring software checksum speed
[    2.681772]    prefetch64-sse:  7165.000 MB/sec
[    2.721769]    generic_sse:  6574.000 MB/sec
[    2.721770] xor: using function: prefetch64-sse (7165.000 MB/sec)
[    2.721788] hub 2-1:1.0: 6 ports detected
[    2.723436] async_tx: api initialized (async)
[    2.734405] md: raid6 personality registered for level 6
[    2.734407] md: raid5 personality registered for level 5
[    2.734408] md: raid4 personality registered for level 4
[    2.742645] md: raid10 personality registered for level 10
[    2.790995] Btrfs loaded, crc32c=crc32c-intel
[    2.825806] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[    3.021167] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    3.049496] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1017
[    3.049500] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.049502] usb 1-1.4: Product: WebCam SC-10HDP11538N
[    3.049504] usb 1-1.4: Manufacturer: Namuga
[    3.146119] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.154360] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    3.154545] systemd[1]: Detected architecture x86-64.
[    3.154843] systemd[1]: Set hostname to <universi-550c22>.
[    3.308856] systemd[1]: isatapd.service: Cannot add dependency job, ignoring: Unit isatapd.service is masked.
[    3.308900] systemd[1]: fancontrol.service: Cannot add dependency job, ignoring: Unit fancontrol.service is masked.
[    3.308920] systemd[1]: postgresql.service: Cannot add dependency job, ignoring: Unit postgresql.service is masked.
[    3.308967] systemd[1]: dnssec-triggerd.service: Cannot add dependency job, ignoring: Unit dnssec-triggerd.service is masked.
[    3.310980] systemd[1]: Reached target Swap.
[    3.311214] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.311529] systemd[1]: Created slice System Slice.
[    3.380927] EXT4-fs (sda4): re-mounted. Opts: discard,user_xattr,errors=remount-ro
[    3.383455] lp: driver loaded but no devices found
[    3.391336] ppdev: user-space parallel port driver
[    3.394897] RPC: Registered named UNIX socket transport module.
[    3.394899] RPC: Registered udp transport module.
[    3.394900] RPC: Registered tcp transport module.
[    3.394901] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.454887] drbd: initialized. Version: 8.4.7 (api:1/proto:86-101)
[    3.454890] drbd: srcversion: 0904DF2CCF7283ACE07D07A 
[    3.454891] drbd: registered as block device major 147
[    3.658838] clocksource: Switched to clocksource tsc
[    3.698102] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    3.699354] ACPI: Lid Switch [LID0]
[    3.699451] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    3.699455] ACPI: Power Button [PWRB]
[    3.699526] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[    3.699529] ACPI: Sleep Button [TPAD]
[    3.699620] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    3.699623] ACPI: Power Button [PWRF]
[    3.760336] ACPI: Battery Slot [BAT0] (battery present)
[    3.768509] ACPI: AC Adapter [AC] (on-line)
[    3.775928] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.799135] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20160831/utaddress-247)
[    3.799145] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.799149] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[    3.799154] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.799155] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[    3.799160] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.799161] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[    3.799166] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.799167] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    3.838862] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.861978] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    3.872609] [drm] Initialized
[    3.893726] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    3.893729] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    3.893730] RAPL PMU: hw unit of domain package 2^-16 Joules
[    3.893731] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    4.120520] intel_rapl: Found RAPL domain package
[    4.120526] intel_rapl: Found RAPL domain core
[    4.120531] intel_rapl: Found RAPL domain uncore
[    4.130630] ath: phy0: ASPM enabled: 0x43
[    4.130634] ath: EEPROM regdomain: 0x6a
[    4.130635] ath: EEPROM indicates we should expect a direct regpair map
[    4.130637] ath: Country alpha2 being used: 00
[    4.130638] ath: Regpair used: 0x6a
[    4.211333] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    4.211759] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffa668c1f00000, irq=16
[    4.223845] iTCO_vendor_support: vendor-support=0
[    4.225355] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    4.225415] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0560)
[    4.227625] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    4.257382] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    4.276460] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[    4.278832] EXT4-fs (sda3): mounted filesystem without journal. Opts: discard,user_xattr
[    4.352879] isl29018: module is from the staging directory, the quality is unknown, you have been warned.
[    4.386430] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    4.390434] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    4.401374] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    4.403128] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    4.413437] input: Cypress APA Trackpad (cyapa) as /devices/pci0000:00/0000:00:1f.3/i2c-0/0-0067/input/input6
[    4.414107] isl29018 0-0044: No cache defaults, reading back from HW
[    4.446011] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    4.484442] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    4.496206] systemd-journald[236]: Received request to flush runtime journal from PID 1
[    5.130950] nfc: nfc_init: NFC Core ver 0.1
[    5.131515] NET: Registered protocol family 39
[    5.718468] media: Linux media interface: v0.10
[    5.721735] random: crng init done
[    5.735096] Linux video capture interface: v2.00
[    5.773814] uvcvideo: Found UVC 1.00 device WebCam SC-10HDP11538N (2232:1017)
[    5.794523] uvcvideo 1-1.4:1.0: Entity type for entity Extension 3 was not initialized!
[    5.794529] uvcvideo 1-1.4:1.0: Entity type for entity Processing 2 was not initialized!
[    5.794532] uvcvideo 1-1.4:1.0: Entity type for entity Camera 1 was not initialized!
[    5.794813] input: WebCam SC-10HDP11538N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input7
[    5.795102] usbcore: registered new interface driver uvcvideo
[    5.795104] USB Video Class driver (1.1.1)
[    5.861704] mei_me 0000:00:16.0: wait hw ready failed
[    5.861769] mei_me 0000:00:16.0: hw_start failed ret = -62
[    5.861838] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[    7.346447] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    7.380471] Ebtables v2.0 registered
[    7.877670] mei_me 0000:00:16.0: wait hw ready failed
[    7.877732] mei_me 0000:00:16.0: hw_start failed ret = -62
[    7.877800] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[    9.893596] mei_me 0000:00:16.0: wait hw ready failed
[    9.893660] mei_me 0000:00:16.0: hw_start failed ret = -62
[    9.893717] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
[    9.893780] mei_me 0000:00:16.0: reset failed ret = -19
[    9.893835] mei_me 0000:00:16.0: link layer initialization failed.
[    9.893893] mei_me 0000:00:16.0: init hw failure.
[    9.894104] mei_me 0000:00:16.0: initialization failed.
[    9.895385] [drm] Memory usable by graphics device = 2048M
[    9.895388] [drm] Replacing VGA console driver
[    9.896215] Console: switching to colour dummy device 80x25
[    9.914147] snd_hda_codec_cirrus hdaudioC0D0: autoconfig for CS4210: line_outs=1 (0x6/0x0/0x0/0x0/0x0) type:speaker
[    9.914151] snd_hda_codec_cirrus hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.914153] snd_hda_codec_cirrus hdaudioC0D0:    hp_outs=1 (0x5/0x0/0x0/0x0/0x0)
[    9.914155] snd_hda_codec_cirrus hdaudioC0D0:    mono: mono_out=0x0
[    9.914157] snd_hda_codec_cirrus hdaudioC0D0:    dig-out=0xa/0x0
[    9.914159] snd_hda_codec_cirrus hdaudioC0D0:    inputs:
[    9.914162] snd_hda_codec_cirrus hdaudioC0D0:      Internal Mic=0x9
[    9.914164] snd_hda_codec_cirrus hdaudioC0D0:      Mic=0x7
[    9.979530] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    9.979533] [drm] Driver supports precise vblank timestamp query.
[    9.979939] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   10.013158] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   10.016390] acpi device:03: registered as cooling_device8
[   10.016505] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[   10.023882] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   10.023897] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[   10.027204] fbcon: inteldrmfb (fb0) is primary device
[   10.747962] Console: switching to colour frame buffer device 160x50
[   10.768538] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   10.809958] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   10.811092] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   10.812201] input: HDA Intel PCH SPDIF as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   10.813468] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   10.813648] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   10.814351] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   12.616041] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.616585] r8169 0000:03:00.0: firmware: failed to load rtl_nic/rtl8168e-3.fw (-2)
[   12.616656] r8169 0000:03:00.0: Direct firmware load for rtl_nic/rtl8168e-3.fw failed with error -2
[   12.616662] r8169 0000:03:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)
[   12.635717] r8169 0000:03:00.0 eth0: link down
[   12.635919] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.673070] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   12.682927] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   12.698252] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.448063] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.182178] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.197954] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.214806] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.263157] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.321119] wlan0: authenticate with f8:1a:67:5a:c4:74
[   17.331478] wlan0: send auth to f8:1a:67:5a:c4:74 (try 1/3)
[   17.342402] wlan0: authenticated
[   17.345553] wlan0: associate with f8:1a:67:5a:c4:74 (try 1/3)
[   17.352609] wlan0: RX AssocResp from f8:1a:67:5a:c4:74 (capab=0x431 status=0 aid=3)
[   17.352757] wlan0: associated
[   17.352814] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   17.404249] ath: EEPROM regdomain: 0x809c
[   17.404252] ath: EEPROM indicates we should expect a country code
[   17.404253] ath: doing EEPROM country->regdmn map search
[   17.404255] ath: country maps to regdmn code: 0x52
[   17.404256] ath: Country alpha2 being used: CN
[   17.404257] ath: Regpair used: 0x52
[   17.404259] ath: regdomain 0x809c dynamically updated by country IE