[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffa8fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dffa9000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-9133-g8d978a8-dirty 04/13/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x160000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 base 0000F8000000 mask FFFFFC000000 write-combining
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000160000000 aka 5632M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xdffa9 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15fe00000-0x15fffffff]
[    0.000000]  [mem 0x15fe00000-0x15fffffff] page 2M
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15c000000-0x15fdfffff]
[    0.000000]  [mem 0x15c000000-0x15fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
[    0.000000]  [mem 0x100000000-0x13fffffff] page 1G
[    0.000000]  [mem 0x140000000-0x15bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xdffa8fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xdfdfffff] page 2M
[    0.000000]  [mem 0xdfe00000-0xdffa8fff] page 4k
[    0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000DFFB20E0 000064 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000DFFB48A0 000074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000DFFB2250 002644 (v02 ASUS   COREBOOT 00000001 INTL 20150204)
[    0.000000] ACPI: FACS 0x00000000DFFB2210 000040
[    0.000000] ACPI: SSDT 0x00000000DFFB49A0 000D57 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: APIC 0x00000000DFFB5700 0000C6 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB57D0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB5948 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000DFFB5980 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB59C0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB5B38 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff]
[    0.000000] SRAT: Node 1 PXM 1 [mem 0x120000000-0x15fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=3
[    0.000000] NUMA: node 2 [mem 0x00100000-0xdfffffff] overlaps with node 0 [mem 0x00100000-0xdfffffff]
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of physical nodes 2
[    0.000000] Node 0 MemBase 0000000000000000 Limit 0000000120000000
[    0.000000] Node 1 MemBase 0000000120000000 Limit 0000000160000000
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
[    0.000000]   NODE_DATA [mem 0x11fffb000-0x11fffffff]
[    0.000000] Initmem setup node 1 [mem 0x120000000-0x15fffffff]
[    0.000000]   NODE_DATA [mem 0x15fff9000-0x15fffdfff]
[    0.000000] [ffffea0003f00000-ffffea0003ffffff] potential offnode page_structs
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0
[    0.000000]  [ffffea0004000000-ffffea0004dfffff] PMD -> [ffff88015e600000-ffff88015f3fffff] on node 1
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x15fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xdffa8fff]
[    0.000000]   node   0: [mem 0x100000000-0x11fffffff]
[    0.000000]   node   1: [mem 0x120000000-0x15fffffff]
[    0.000000] On node 0 totalpages: 1048391
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12487 pages used for memmap
[    0.000000]   DMA32 zone: 913321 pages, LIFO batch:31
[    0.000000]   Normal zone: 1792 pages used for memmap
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] On node 1 totalpages: 262144
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdffa9000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xffffffff]
[    0.000000] e820: [mem 0xf0000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 
[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1292595
[    0.000000] Policy zone: Normal
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xe5ea000000-0xe5ebffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
[    0.000000] Memory: 5015500K/5242140K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 226640K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1909.769 MHz processor
[    0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.53 BogoMIPS (lpj=7639076)
[    0.010953] pid_max: default: 32768 minimum: 301
[    0.015676] ACPI: Core revision 20140424
[    0.022045] ACPI: All ACPI Tables successfully acquired
[    0.027566] Security Framework initialized
[    0.031745] AppArmor: AppArmor disabled by boot time parameter
[    0.037655] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.045468] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.058784] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.068643] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.075695] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.083648] Initializing cgroup subsys memory
[    0.088113] Initializing cgroup subsys devices
[    0.092657] Initializing cgroup subsys freezer
[    0.097182] Initializing cgroup subsys net_cls
[    0.101716] Initializing cgroup subsys blkio
[    0.106073] Initializing cgroup subsys perf_event
[    0.110869] Initializing cgroup subsys net_prio
[    0.115527] tseg: 0000000000
[    0.115541] CPU: Physical Processor ID: 0
[    0.119659] CPU: Processor Core ID: 0
[    0.124453] mce: CPU supports 6 MCE banks
[    0.128592] LVT offset 0 assigned for vector 0xf9
[    0.133392] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.148870] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
[    0.158007] ftrace: allocating 21601 entries in 85 pages
[    0.173479] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.219117] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
[    0.336303] Performance Events: AMD PMU driver.
[    0.341013] ... version:                0
[    0.345094] ... bit width:              48
[    0.349271] ... generic registers:      4
[    0.353348] ... value mask:             0000ffffffffffff
[    0.358743] ... max period:             00007fffffffffff
[    0.364123] ... fixed-purpose events:   0
[    0.368200] ... event mask:             000000000000000f
[    0.376187] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.384504] x86: Booting SMP configuration:
[    0.388778] .... node  #0, CPUs:      #1 #2 #3
[    0.433390] .... node  #1, CPUs:   #4 #5 #6 #7
[    0.585116] x86: Booted up 2 nodes, 8 CPUs
[    0.589544] smpboot: Total of 8 processors activated (30557.35 BogoMIPS)
[    0.602183] devtmpfs: initialized
[    0.614199] pinctrl core: initialized pinctrl subsystem
[    0.619672] NET: Registered protocol family 16
[    0.624414] cpuidle: using governor ladder
[    0.628589] cpuidle: using governor menu
[    0.632598] node 0 link 1: io port [1000, 3fff]
[    0.632601] TOM: 00000000e0000000 aka 3584M
[    0.636862] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.636866] node 0 link 1: mmio [fc000000, fc3fffff]
[    0.636870] node 0 link 1: mmio [f8000000, fbffffff]
[    0.636872] TOM2: 0000000160000000 aka 5632M
[    0.641211] bus: [bus 00-05] on node 0 link 1
[    0.641213] bus: 00 [io  0x0000-0xffff]
[    0.641214] bus: 00 [mem 0xf0000000-0xffffffff]
[    0.641216] bus: 00 [mem 0x160000000-0xfcffffffff]
[    0.641321] ACPI: bus type PCI registered
[    0.645413] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.652096] PCI: Using configuration type 1 for base access
[    0.657744] PCI: Using configuration type 1 for extended access
[    0.664361] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.670721] mtrr: probably your BIOS does not setup all CPUs.
[    0.676546] mtrr: corrected configuration.
[    0.693229] ACPI: Added _OSI(Module Device)
[    0.697531] ACPI: Added _OSI(Processor Device)
[    0.702057] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.706839] ACPI: Added _OSI(Processor Aggregator Device)
[    0.715724] ACPI: Interpreter enabled
[    0.719475] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.728958] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[    0.738389] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[    0.747826] ACPI: (supports S0 S1 S5)
[    0.751558] ACPI: Using IOAPIC for interrupt routing
[    0.756643] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.784376] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[    0.790638] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.798942] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.835399] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.845516] PCI host bridge to bus 0000:00
[    0.849687] pci_bus 0000:00: root bus resource [bus 00-05]
[    0.855233] pci_bus 0000:00: root bus resource [io  0x0d00-0x3fff]
[    0.861483] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[    0.868434] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
[    0.875381] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.881647] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.881839] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[    0.881847] pci 0000:00:01.0: reg 0x10: [io  0x2c00-0x2c7f]
[    0.881961] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.881972] pci 0000:00:01.1: reg 0x10: [io  0x3000-0x301f]
[    0.881996] pci 0000:00:01.1: reg 0x20: [io  0x2c80-0x2cbf]
[    0.882006] pci 0000:00:01.1: reg 0x24: [io  0x2cc0-0x2cff]
[    0.882041] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.882143] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.882159] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
[    0.882195] pci 0000:00:02.0: supports D1 D2
[    0.882198] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.882246] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.888053] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.888066] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
[    0.888119] pci 0000:00:02.1: supports D1 D2
[    0.888121] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.888173] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.893983] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.894009] pci 0000:00:06.0: reg 0x20: [io  0x3020-0x302f]
[    0.894037] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.901263] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.907880] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.915109] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.921832] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.921844] pci 0000:00:07.0: reg 0x10: [io  0x3050-0x3057]
[    0.921849] pci 0000:00:07.0: reg 0x14: [io  0x3070-0x3073]
[    0.921853] pci 0000:00:07.0: reg 0x18: [io  0x3058-0x305f]
[    0.921858] pci 0000:00:07.0: reg 0x1c: [io  0x3074-0x3077]
[    0.921862] pci 0000:00:07.0: reg 0x20: [io  0x3030-0x303f]
[    0.921867] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
[    0.922014] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.922023] pci 0000:00:08.0: reg 0x10: [io  0x3060-0x3067]
[    0.922028] pci 0000:00:08.0: reg 0x14: [io  0x3078-0x307b]
[    0.922033] pci 0000:00:08.0: reg 0x18: [io  0x3068-0x306f]
[    0.922037] pci 0000:00:08.0: reg 0x1c: [io  0x307c-0x307f]
[    0.922042] pci 0000:00:08.0: reg 0x20: [io  0x3040-0x304f]
[    0.922047] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
[    0.922217] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[    0.922332] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.928124] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.928173] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.928225] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.934012] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.934068] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.934123] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.939933] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.939983] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.940047] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.945850] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.945899] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.946004] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.951832] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.951981] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.952089] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.952181] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.952299] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.952422] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[    0.952550] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[    0.952681] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[    0.952801] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[    0.952954] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[    0.953139] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[    0.953173] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.953190] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
[    0.953208] pci 0000:01:04.0: reg 0x18: [io  0x1000-0x107f]
[    0.953249] pci 0000:01:04.0: supports D1 D2
[    0.953347] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.958410] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    0.958414] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.958417] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    0.958535] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[    0.958575] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
[    0.958611] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref]
[    0.958701] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.958823] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.968936] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.973992] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.974101] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[    0.974127] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
[    0.974240] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.974338] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.984460] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.989518] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    0.989603] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.994718] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    0.999806] pci_bus 0000:00: on NUMA node 0
[    0.999909] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    1.006332] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    1.012747] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    1.020386] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    1.028050] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    1.035711] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[    1.043371] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    1.049787] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[    1.056209] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[    1.063859] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    1.071556] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    1.079222] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[    1.085643] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[    1.092059] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[    1.099722] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[    1.107371] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[    1.115041] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.124151] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[    1.130864] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[    1.137578] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[    1.144309] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[    1.151315] ACPI: Enabled 1 GPEs in block 00 to 1F
[    1.156569] vgaarb: setting as boot device: PCI:0000:01:04.0
[    1.162356] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[    1.170546] vgaarb: loaded
[    1.173348] vgaarb: bridge control possible 0000:01:04.0
[    1.178911] PCI: Using ACPI for IRQ routing
[    1.183183] PCI: pci_cache_line_size set to 64 bytes
[    1.183240] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.183243] e820: reserve RAM buffer [mem 0xdffa9000-0xdfffffff]
[    1.183559] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.190692] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    1.195967] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    1.204709] Switched to clocksource hpet
[    1.220324] pnp: PnP ACPI init
[    1.223540] ACPI: bus type PNP registered
[    1.228177] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.228257] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.228356] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.228434] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.228475] pnp 00:04: [dma 2]
[    1.228517] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.228539] pnp: PnP ACPI: found 5 devices
[    1.232736] ACPI: bus type PNP unregistered
[    1.244822] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window
[    1.254880] pci 0000:00:09.0: PCI bridge to [bus 01]
[    1.259925] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    1.266109] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    1.272987] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    1.280319] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
[    1.287667] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.292715] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    1.299592] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    1.304636] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    1.311504] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    1.316559] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.321603] pci_bus 0000:00: resource 4 [io  0x0d00-0x3fff]
[    1.321605] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
[    1.321609] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
[    1.321611] pci_bus 0000:00: resource 7 [io  0x0000-0x0cf7]
[    1.321614] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    1.321617] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[    1.321619] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[    1.321622] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
[    1.321625] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
[    1.321756] NET: Registered protocol family 2
[    1.326704] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.334490] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.341904] TCP: Hash tables configured (established 65536 bind 65536)
[    1.348598] TCP: reno registered
[    1.351919] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.358191] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.365061] NET: Registered protocol family 1
[    1.369929] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    1.376109] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.382084] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.387694] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.393289] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    1.398929] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.404546] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.410159] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    1.415814] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.421411] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.426998] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    1.432656] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.438258] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.443848] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    1.449497] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.455096] pci 0000:01:04.0: Video device with shadowed ROM
[    1.455104] PCI: CLS 64 bytes, default 64
[    1.455212] Unpacking initramfs...
[    1.688404] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
[    1.696374] PCI-DMA: Disabling AGP.
[    1.701574] PCI-DMA: aperture base @ d4000000 size 65536 KB
[    1.707243] PCI-DMA: using GART IOMMU.
[    1.711066] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.723175] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.731524] microcode: CPU0: patch_level=0x01000096
[    1.736534] microcode: CPU1: patch_level=0x01000096
[    1.741548] microcode: CPU2: patch_level=0x01000096
[    1.746552] microcode: CPU3: patch_level=0x01000096
[    1.751565] microcode: CPU4: patch_level=0x01000096
[    1.756559] microcode: CPU5: patch_level=0x01000096
[    1.761553] microcode: CPU6: patch_level=0x01000096
[    1.767655] microcode: CPU7: patch_level=0x01000096
[    1.772741] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.781676] LVT offset 1 assigned for vector 0x400
[    1.786596] IBS: LVT offset 1 assigned
[    1.790467] perf: AMD IBS detected (0x00000007)
[    1.795683] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.802143] audit: initializing netlink subsys (disabled)
[    1.807653] audit: type=2000 audit(1428941801.616:1): initialized
[    1.814568] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.821064] zbud: loaded
[    1.824026] VFS: Disk quotas dquot_6.5.2
[    1.828074] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.834726] msgmni has been set to 9941
[    1.839198] alg: No test for stdrng (krng)
[    1.843496] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.851140] io scheduler noop registered
[    1.855172] io scheduler deadline registered
[    1.859598] io scheduler cfq registered (default)
[    1.864603] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[    1.864731] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[    1.864858] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[    1.864983] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[    1.865132] aer 0000:00:0b.0:pcie02: service driver aer loaded
[    1.865159] aer 0000:00:0c.0:pcie02: service driver aer loaded
[    1.865185] aer 0000:00:0d.0:pcie02: service driver aer loaded
[    1.865210] aer 0000:00:0e.0:pcie02: service driver aer loaded
[    1.865231] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    1.872327] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.878953] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    1.878964] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    1.886001] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.892608] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    1.892619] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[    1.899662] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[    1.899674] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[    1.906714] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[    1.906747] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.912428] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.919252] GHES: HEST is not enabled!
[    1.923220] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.950007] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.977798] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.985833] Linux agpgart interface v0.103
[    1.990245] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[    2.000937] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.006074] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.011408] mousedev: PS/2 mouse device common for all mice
[    2.017208] rtc_cmos rtc_cmos: RTC can wake from S4
[    2.022414] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    2.028926] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    2.036907] ledtrig-cpu: registered to indicate activity on CPUs
[    2.043173] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.049718] AMD IOMMUv2 functionality not available on this system
[    2.056129] TCP: cubic registered
[    2.059680] NET: Registered protocol family 10
[    2.064648] mip6: Mobile IPv6
[    2.067725] NET: Registered protocol family 17
[    2.072319] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.081091] mpls_gso: MPLS GSO support
[    2.085830] registered taskstats version 1
[    2.090763] rtc_cmos rtc_cmos: setting system clock to 2015-04-13 16:16:43 UTC (1428941803)
[    2.099343] PM: Hibernation image not present or could not be loaded.
[    2.101168] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
[    2.109149] Write protecting the kernel read-only data: 8192k
[    2.118491] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
[    2.127237] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    2.147358] systemd-udevd[99]: starting version 215
[    2.152917] random: systemd-udevd urandom read with 4 bits of entropy available
[    2.176190] ACPI: bus type USB registered
[    2.180492] usbcore: registered new interface driver usbfs
[    2.180579] pps_core: LinuxPPS API ver. 1 registered
[    2.180580] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.200447] usbcore: registered new interface driver hub
[    2.206100] usbcore: registered new device driver usb
[    2.206141] PTP clock support registered
[    2.216370] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.223432] tg3.c:v3.137 (May 11, 2014)
[    2.227466] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[    2.233373] ehci-pci: EHCI PCI platform driver
[    2.233485] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[    2.244011] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.244086] ehci-pci 0000:00:02.1: EHCI Host Controller
[    2.244102] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    2.244124] ehci-pci 0000:00:02.1: debug port 1
[    2.244170] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    2.244199] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
[    2.252373] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.252439] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.252440] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.252442] usb usb1: Product: EHCI Host Controller
[    2.252443] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.252444] usb usb1: SerialNumber: 0000:00:02.1
[    2.252749] hub 1-0:1.0: USB hub found
[    2.252760] hub 1-0:1.0: 10 ports detected
[    2.318058] ohci-pci: OHCI PCI platform driver
[    2.322833] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    2.328497] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.336050] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
[    2.375595] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[    2.385992] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.395854] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.403832] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.406045] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.406047] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.406049] usb usb2: Product: OHCI PCI host controller
[    2.406050] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.406051] usb usb2: SerialNumber: 0000:00:02.0
[    2.406344] hub 2-0:1.0: USB hub found
[    2.406373] hub 2-0:1.0: 10 ports detected
[    2.449119] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[    2.455020] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[    2.512677] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[    2.523070] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.532933] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.540892] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.554185] FS-Cache: Loaded
[    2.561398] RPC: Registered named UNIX socket transport module.
[    2.568059] RPC: Registered udp transport module.
[    2.574133] RPC: Registered tcp transport module.
[    2.580209] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.592891] FS-Cache: Netfs 'nfs' registered for caching
[    2.606460] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[    2.652344] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    2.720205] tsc: Refined TSC clocksource calibration: 1909.787 MHz
[    3.723949] Switched to clocksource tsc
[    4.223674] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
[    4.230314] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[    4.237313] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    5.331007] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    5.345189] systemd[1]: Detected architecture 'x86-64'.
[    5.754726] systemd[1]: Inserted module 'autofs4'
[    5.761090] systemd[1]: Set hostname to <cb-test-tgt>.
[    5.769878] random: nonblocking pool is initialized
[    6.692134] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[    6.705044] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    6.720414] systemd[1]: Expecting device dev-ttyS0.device...
[    6.734871] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    6.742731] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.750420] systemd[1]: Starting Remote File Systems (Pre).
[    6.766935] systemd[1]: Reached target Remote File Systems (Pre).
[    6.773291] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    6.794832] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.804380] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    6.812591] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.820632] systemd[1]: Starting Paths.
[    6.834901] systemd[1]: Reached target Paths.
[    6.839447] systemd[1]: Starting Encrypted Volumes.
[    6.854810] systemd[1]: Reached target Encrypted Volumes.
[    6.860355] systemd[1]: Starting Swap.
[    6.874810] systemd[1]: Reached target Swap.
[    6.879192] systemd[1]: Starting Root Slice.
[    6.898798] systemd[1]: Created slice Root Slice.
[    6.903676] systemd[1]: Starting User and Session Slice.
[    6.918872] systemd[1]: Created slice User and Session Slice.
[    6.924822] systemd[1]: Starting Delayed Shutdown Socket.
[    6.938817] systemd[1]: Listening on Delayed Shutdown Socket.
[    6.944737] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    6.962790] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.969900] systemd[1]: Starting Journal Socket (/dev/log).
[    6.986775] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.992836] systemd[1]: Starting Syslog Socket.
[    7.006766] systemd[1]: Listening on Syslog Socket.
[    7.012874] systemd[1]: Starting udev Kernel Socket.
[    7.026755] systemd[1]: Listening on udev Kernel Socket.
[    7.032202] systemd[1]: Starting udev Control Socket.
[    7.046752] systemd[1]: Listening on udev Control Socket.
[    7.052315] systemd[1]: Starting Journal Socket.
[    7.066739] systemd[1]: Listening on Journal Socket.
[    7.071898] systemd[1]: Starting Sockets.
[    7.086734] systemd[1]: Reached target Sockets.
[    7.091441] systemd[1]: Starting System Slice.
[    7.106723] systemd[1]: Created slice System Slice.
[    7.111744] systemd[1]: Starting system-getty.slice.
[    7.126723] systemd[1]: Created slice system-getty.slice.
[    7.132258] systemd[1]: Starting system-serial\x2dgetty.slice.
[    7.146717] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    7.153695] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.175854] systemd[1]: Mounting Debug File System...
[    7.211177] systemd[1]: Started Set Up Additional Binary Formats.
[    7.217498] systemd[1]: Mounting Huge Pages File System...
[    7.275401] systemd[1]: Starting Load Kernel Modules...
[    7.292757] systemd[1]: Mounting POSIX Message Queue File System...
[    7.312542] systemd[1]: Starting udev Coldplug all Devices...
[    7.327643] systemd[1]: Starting Journal Service...
[    7.354732] systemd[1]: Started Journal Service.
[    7.915576] systemd-udevd[187]: starting version 215
[    8.464955] systemd-journald[168]: Received request to flush runtime journal from PID 1
[    9.336792] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[    9.344796] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[    9.361412] EDAC MC: Ver: 3.0.0
[    9.365220] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    9.373789] ACPI: Power Button [PWRB]
[    9.377683] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    9.385213] ACPI: Power Button [PWRF]
[    9.405840] FDC 0 is a post-1991 82077
[    9.452503] MCE: In-kernel MCE decoding enabled.
[    9.488709] SCSI subsystem initialized
[    9.493535] AMD64 EDAC driver v3.4.0
[    9.498747] acpi-cpufreq: overriding BIOS provided _PSD data
[    9.526002] w83793 0-002f: Registered watchdog chardev major 10, minor: 130
[    9.533156] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[    9.539140] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    9.546371] libata version 3.00 loaded.
[    9.649336] kvm: Nested Virtualization enabled
[    9.653940] kvm: Nested Paging enabled
[   12.768746] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[   12.774297] EDAC amd64: DRAM ECC enabled.
[   12.778480] EDAC amd64: F10h detected (node 0).
[   12.783182] EDAC MC: DCT0 chip selects:
[   12.783186] EDAC amd64: MC: 0:     0MB 1:     0MB
[   12.788024] EDAC amd64: MC: 2:     0MB 3:     0MB
[   12.792834] EDAC amd64: MC: 4:     0MB 5:     0MB
[   12.797638] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   12.802439] EDAC MC: DCT1 chip selects:
[   12.802443] EDAC amd64: MC: 0:     0MB 1:     0MB
[   12.807250] EDAC amd64: MC: 2:     0MB 3:     0MB
[   12.812058] EDAC amd64: MC: 4:     0MB 5:     0MB
[   12.816856] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   12.821666] EDAC amd64: using x4 syndromes.
[   12.825945] EDAC amd64: MCT channel count: 2
[   12.830371] EDAC amd64: CS6: Registered DDR2 RAM
[   12.835088] EDAC amd64: CS7: Registered DDR2 RAM
[   12.840233] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[   12.850133] EDAC amd64: DRAM ECC enabled.
[   12.854341] EDAC amd64: F10h detected (node 1).
[   12.859010] EDAC MC: DCT0 chip selects:
[   12.859014] EDAC amd64: MC: 0:  1024MB 1:     0MB
[   12.863819] EDAC amd64: MC: 2:     0MB 3:     0MB
[   12.868643] EDAC amd64: MC: 4:     0MB 5:     0MB
[   12.873446] EDAC amd64: MC: 6:     0MB 7:     0MB
[   12.878251] EDAC MC: DCT1 chip selects:
[   12.878254] EDAC amd64: MC: 0:     0MB 1:     0MB
[   12.883050] EDAC amd64: MC: 2:     0MB 3:     0MB
[   12.887853] EDAC amd64: MC: 4:     0MB 5:     0MB
[   12.892650] EDAC amd64: MC: 6:     0MB 7:     0MB
[   12.897449] EDAC amd64: using x4 syndromes.
[   12.901722] EDAC amd64: MCT channel count: 1
[   12.906181] EDAC amd64: CS0: Registered DDR2 RAM
[   12.911229] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
[   12.921145] sata_nv 0000:00:07.0: version 3.5
[   12.921151] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[   12.932523] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[   12.939255] scsi0 : sata_nv
[   12.942459] scsi1 : sata_nv
[   12.945491] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[   12.952752] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[   12.960298] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[   12.966593] scsi2 : sata_nv
[   12.969711] scsi3 : sata_nv
[   12.972686] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[   12.979893] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[   12.987180] pata_amd 0000:00:06.0: version 0.4.1
[   12.987915] scsi4 : pata_amd
[   12.991064] scsi5 : pata_amd
[   12.994279] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[   13.001350] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[   13.008566] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.268573] ata1: SATA link down (SStatus 0 SControl 300)
[   13.296568] ata3: SATA link down (SStatus 0 SControl 300)
[   13.584448] ata2: SATA link down (SStatus 0 SControl 300)
[   13.900352] ata4: SATA link down (SStatus 0 SControl 300)