[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=4fcc9a5d-b1f6-4986-9caf-7a7651ac83f2 ro console=ttyS0,115200
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf12ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf130000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: ASUS F2A85-M/F2A85-M, BIOS 4.0-5833-gcf7b498 04/27/2014
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 base 0000FF800000 mask FFFFFF800000 write-protect
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000021f000000 aka 8688M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xbf130 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd9a0-0x000fd9af] mapped at [ffff8800000fd9a0]
[    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0xbf12ffff]
[    0.000000]  [mem 0x00000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0xbeffffff] page 2M
[    0.000000]  [mem 0xbf000000-0xbf12ffff] page 4k
[    0.000000] kernel direct mapping tables up to 0xbf12ffff @ [mem 0x1fffd000-0x1fffffff]
[    0.000000] init_memory_mapping: [mem 0x100000000-0x21effffff]
[    0.000000]  [mem 0x100000000-0x1ffffffff] page 1G
[    0.000000]  [mem 0x200000000-0x21effffff] page 2M
[    0.000000] kernel direct mapping tables up to 0x21effffff @ [mem 0xbf12e000-0xbf12ffff]
[    0.000000] RAMDISK: [mem 0x362e2000-0x37168fff]
[    0.000000] ACPI: RSDP 00000000000fd980 00014 (v00 CORE  )
[    0.000000] ACPI: RSDT 00000000bf132424 00040 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 00000000bf133d88 000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 00000000bf1324c8 0187C (v02 ASUS   COREBOOT 00010001 INTL 20130626)
[    0.000000] ACPI: FACS 00000000bf133d48 00040
[    0.000000] ACPI: HPET 00000000bf133e80 00038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 00000000bf133eb8 00072 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HEST 00000000bf133f30 001D0 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SSDT 00000000bf134100 0051F (v02    AMD     ALIB 00000001 MSFT 04000000)
[    0.000000] ACPI: SSDT 00000000bf134620 00D40 (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 00000000bf135360 00045 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x21effffff]
[    0.000000]   NODE_DATA [mem 0x21effc000-0x21effffff]
[    0.000000]  [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216e00000-ffff88021e5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x21effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xbf12ffff]
[    0.000000]   node   0: [mem 0x100000000-0x21effffff]
[    0.000000] On node 0 totalpages: 1958079
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3913 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 16320 pages used for memmap
[    0.000000]   DMA32 zone: 762224 pages, LIFO batch:31
[    0.000000]   Normal zone: 18368 pages used for memmap
[    0.000000]   Normal zone: 1157184 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x818
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bf130000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 0000000100000000
[    0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021ec00000 s83584 r8192 d22912 u524288
[    0.000000] pcpu-alloc: s83584 r8192 d22912 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1923321
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=4fcc9a5d-b1f6-4986-9caf-7a7651ac83f2 ro console=ttyS0,115200
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7612212k/8896512k available (6711k kernel code, 1064196k absent, 220104k reserved, 6459k data, 928k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16640 nr_irqs:712 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] allocated 31457280 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 3793.038 MHz processor.
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 7586.07 BogoMIPS (lpj=15172152)
[    0.010669] pid_max: default: 32768 minimum: 301
[    0.015288] Security Framework initialized
[    0.019380] AppArmor: AppArmor initialized
[    0.023463] Yama: becoming mindful.
[    0.027431] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.036705] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.044703] Mount-cache hash table entries: 256
[    0.049369] Initializing cgroup subsys cpuacct
[    0.053804] Initializing cgroup subsys memory
[    0.058152] Initializing cgroup subsys devices
[    0.062584] Initializing cgroup subsys freezer
[    0.067013] Initializing cgroup subsys blkio
[    0.071271] Initializing cgroup subsys perf_event
[    0.075978] tseg: 0000000000
[    0.075988] CPU: Physical Processor ID: 0
[    0.079984] CPU: Processor Core ID: 0
[    0.083638] mce: CPU supports 7 MCE banks
[    0.088968] ACPI: Core revision 20120320
[    0.093878] ftrace: allocating 25118 entries in 99 pages
[    0.106977] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.152334] CPU0: AMD A10-5800K APU with Radeon(tm) HD Graphics   stepping 01
[    0.265925] Performance Events: AMD Family 15h PMU driver.
[    0.271402] ... version:                0
[    0.275391] ... bit width:              48
[    0.279466] ... generic registers:      6
[    0.283455] ... value mask:             0000ffffffffffff
[    0.288741] ... max period:             00007fffffffffff
[    0.294026] ... fixed-purpose events:   0
[    0.298016] ... event mask:             000000000000003f
[    0.303410] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.311455] Booting Node   0, Processors  #1 #2 #3 Ok.
[    0.355731] Brought up 4 CPUs
[    0.358691] Total of 4 processors activated (30344.30 BogoMIPS).
[    0.365472] devtmpfs: initialized
[    0.369995] EVM: security.selinux
[    0.373292] EVM: security.SMACK64
[    0.376593] EVM: security.capability
[    0.380890] dummy: 
[    0.383005] RTC time: 16:37:05, date: 04/27/14
[    0.387460] NET: Registered protocol family 16
[    0.392062] Trying to unpack rootfs image as initramfs...
[    0.397461] ACPI: bus type pci registered
[    0.401494] PCI: Using configuration type 1 for base access
[    0.407042] PCI: Using configuration type 1 for extended access
[    0.413863] bio: create slab <bio-0> at 0
[    0.417934] ACPI: Added _OSI(Module Device)
[    0.422103] ACPI: Added _OSI(Processor Device)
[    0.426524] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.431206] ACPI: Added _OSI(Processor Aggregator Device)
[    0.437023] ACPI: EC: Look up EC in DSDT
[    0.437518] ACPI: Executed 1 blocks of module-level executable AML code
[    0.446350] ACPI: Interpreter enabled
[    0.449998] ACPI: (supports S0 S1 S2 S3 S4 S5)
[    0.454556] ACPI: BIOS offers _BFS
[    0.457940] ACPI: If "acpi.bfs=1" improves resume, please notify linux-acpi@vger.kernel.org
[    0.466250] ACPI: Using IOAPIC for interrupt routing
[    0.472844] ACPI: No dock devices found.
[    0.476752] HEST: Table parsing has been initialized.
[    0.481787] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.490946] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.497164] pci_root PNP0A03:00: >host bridge window [io  0x0000-0x0cf7]
[    0.503834] pci_root PNP0A03:00: >host bridge window [io  0x03b0-0x03df]
[    0.510509] pci_root PNP0A03:00: >host bridge window [io  0x0d00-0xffff]
[    0.517183] pci_root PNP0A03:00: >host bridge window [mem 0x000a0000-0x000bffff]
[    0.524540] pci_root PNP0A03:00: >host bridge window [mem 0x000c0000-0x000dffff]
[    0.531899] pci_root PNP0A03:00: >host bridge window [mem 0xe0000000-0xffffffff]
[    0.539266] pci_root PNP0A03:00: >host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.549501] PCI host bridge to bus 0000:00
[    0.553584] pci_bus 0000:00: >root bus resource [io  0x0000-0x0cf7]
[    0.559827] pci_bus 0000:00: >root bus resource [io  0x0d00-0xffff]
[    0.566062] pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
[    0.572995] pci_bus 0000:00: >root bus resource [mem 0x000c0000-0x000dffff]
[    0.579924] pci_bus 0000:00: >root bus resource [mem 0xe0000000-0xffffffff]
[    0.586864] pci 0000:00:00.0: >[1022:1410] type 00 class 0x060000
[    0.586901] pci 0000:00:01.0: >[1002:9901] type 00 class 0x030000
[    0.586908] pci 0000:00:01.0: >reg 10: [mem 0xe0000000-0xefffffff pref]
[    0.586912] pci 0000:00:01.0: >reg 14: [io  0x2000-0x20ff]
[    0.586917] pci 0000:00:01.0: >reg 18: [mem 0xf0100000-0xf013ffff]
[    0.586951] pci 0000:00:01.0: >supports D1 D2
[    0.586966] pci 0000:00:01.1: >[1002:9902] type 00 class 0x040300
[    0.586972] pci 0000:00:01.1: >reg 10: [mem 0xf0140000-0xf0143fff]
[    0.587009] pci 0000:00:01.1: >supports D1 D2
[    0.587049] pci 0000:00:10.0: >[1022:7812] type 00 class 0x0c0330
[    0.587053] Freeing initrd memory: 14876k freed
[    0.587074] pci 0000:00:10.0: >reg 10: [mem 0xf0148000-0xf0149fff 64bit]
[    0.587223] pci 0000:00:10.0: >PME# supported from D0 D3hot D3cold
[    0.587283] pci 0000:00:10.1: >[1022:7812] type 00 class 0x0c0330
[    0.587309] pci 0000:00:10.1: >reg 10: [mem 0xf014a000-0xf014bfff 64bit]
[    0.587458] pci 0000:00:10.1: >PME# supported from D0 D3hot D3cold
[    0.587506] pci 0000:00:11.0: >[1022:7801] type 00 class 0x010601
[    0.587526] pci 0000:00:11.0: >reg 10: [io  0x2410-0x2417]
[    0.587537] pci 0000:00:11.0: >reg 14: [io  0x2420-0x2423]
[    0.587547] pci 0000:00:11.0: >reg 18: [io  0x2418-0x241f]
[    0.587557] pci 0000:00:11.0: >reg 1c: [io  0x2424-0x2427]
[    0.587568] pci 0000:00:11.0: >reg 20: [io  0x2400-0x240f]
[    0.587578] pci 0000:00:11.0: >reg 24: [mem 0xf014f000-0xf014f7ff]
[    0.587633] pci 0000:00:12.0: >[1022:7807] type 00 class 0x0c0310
[    0.587648] pci 0000:00:12.0: >reg 10: [mem 0xf014c000-0xf014cfff]
[    0.587734] pci 0000:00:12.2: >[1022:7808] type 00 class 0x0c0320
[    0.587755] pci 0000:00:12.2: >reg 10: [mem 0xf014f800-0xf014f8ff]
[    0.587856] pci 0000:00:12.2: >supports D1 D2
[    0.587857] pci 0000:00:12.2: >PME# supported from D0 D1 D2 D3hot
[    0.587883] pci 0000:00:13.0: >[1022:7807] type 00 class 0x0c0310
[    0.587898] pci 0000:00:13.0: >reg 10: [mem 0xf014d000-0xf014dfff]
[    0.587986] pci 0000:00:13.2: >[1022:7808] type 00 class 0x0c0320
[    0.588007] pci 0000:00:13.2: >reg 10: [mem 0xf014f900-0xf014f9ff]
[    0.588108] pci 0000:00:13.2: >supports D1 D2
[    0.588109] pci 0000:00:13.2: >PME# supported from D0 D1 D2 D3hot
[    0.588136] pci 0000:00:14.0: >[1022:780b] type 00 class 0x0c0500
[    0.588230] pci 0000:00:14.2: >[1022:780d] type 00 class 0x040300
[    0.588255] pci 0000:00:14.2: >reg 10: [mem 0xf0144000-0xf0147fff 64bit]
[    0.588335] pci 0000:00:14.2: >PME# supported from D0 D3hot D3cold
[    0.588351] pci 0000:00:14.3: >[1022:780e] type 00 class 0x060100
[    0.588443] pci 0000:00:14.4: >[1022:780f] type 01 class 0x060401
[    0.588493] pci 0000:00:14.5: >[1022:7809] type 00 class 0x0c0310
[    0.588507] pci 0000:00:14.5: >reg 10: [mem 0xf014e000-0xf014efff]
[    0.588585] pci 0000:00:14.7: >[1022:7806] type 00 class 0x080501
[    0.588605] pci 0000:00:14.7: >reg 10: [mem 0xf014fa00-0xf014faff 64bit]
[    0.588679] pci 0000:00:15.0: >[1022:43a0] type 01 class 0x060400
[    0.588777] pci 0000:00:15.0: >supports D1 D2
[    0.588809] pci 0000:00:15.1: >[1022:43a1] type 01 class 0x060400
[    0.588907] pci 0000:00:15.1: >supports D1 D2
[    0.588938] pci 0000:00:18.0: >[1022:1400] type 00 class 0x060000
[    0.588953] pci 0000:00:18.1: >[1022:1401] type 00 class 0x060000
[    0.588967] pci 0000:00:18.2: >[1022:1402] type 00 class 0x060000
[    0.588981] pci 0000:00:18.3: >[1022:1403] type 00 class 0x060000
[    0.588999] pci 0000:00:18.4: >[1022:1404] type 00 class 0x060000
[    0.589012] pci 0000:00:18.5: >[1022:1405] type 00 class 0x060000
[    0.589118] pci 0000:00:14.4: >PCI bridge to [bus 01-01] (subtractive decode)
[    0.589128] pci 0000:00:14.4: >  bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.589129] pci 0000:00:14.4: >  bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.589130] pci 0000:00:14.4: >  bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.589131] pci 0000:00:14.4: >  bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.589132] pci 0000:00:14.4: >  bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
[    0.589193] pci 0000:00:15.0: >PCI bridge to [bus 02-02]
[    0.589293] pci 0000:03:00.0: >[10ec:8168] type 00 class 0x020000
[    0.589317] pci 0000:03:00.0: >reg 10: [io  0x1000-0x10ff]
[    0.589359] pci 0000:03:00.0: >reg 18: [mem 0xf0004000-0xf0004fff 64bit pref]
[    0.589386] pci 0000:03:00.0: >reg 20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.589504] pci 0000:03:00.0: >supports D1 D2
[    0.589504] pci 0000:03:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
[    0.596810] pci 0000:00:15.1: >PCI bridge to [bus 03-03]
[    0.596817] pci 0000:00:15.1: >  bridge window [io  0x1000-0x1fff]
[    0.596826] pci 0000:00:15.1: >  bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.596850] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.597027] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PIBR._PRT]
[    0.597052] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBR0._PRT]
[    0.597078] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBR1._PRT]
[    0.597136]  pci0000:00: >Requesting ACPI _OSC control (0x1d)
[    0.597179]  pci0000:00: >ACPI _OSC control (0x1d) granted
[    0.601403] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.601436] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.601467] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.601498] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.601528] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.601558] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0
[    0.601586] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.601618] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.601694] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.601702] vgaarb: loaded
[    0.601702] vgaarb: bridge control possible 0000:00:01.0
[    0.601843] SCSI subsystem initialized
[    0.601904] libata version 3.00 loaded.
[    0.601919] ACPI: bus type usb registered
[    0.601936] usbcore: registered new interface driver usbfs
[    0.601942] usbcore: registered new interface driver hub
[    0.601974] usbcore: registered new device driver usb
[    0.602051] PCI: Using ACPI for IRQ routing
[    0.602052] PCI: pci_cache_line_size set to 64 bytes
[    0.602140] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.602141] e820: reserve RAM buffer [mem 0xbf130000-0xbfffffff]
[    0.602142] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[    0.602215] NetLabel: Initializing
[    0.602215] NetLabel:  domain hash size = 128
[    0.602215] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.602223] NetLabel:  unlabeled traffic allowed by default
[    0.602265] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.602267] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.604286] Switching to clocksource hpet
[    0.753303] AppArmor: AppArmor Filesystem Enabled
[    0.764771] pnp: PnP ACPI init
[    0.767838] ACPI: bus type pnp registered
[    0.771916] pnp 00:00: >[bus 00-ff]
[    0.771920] pnp 00:00: >[io  0x0cf8-0x0cff]
[    0.771922] pnp 00:00: >[io  0x0000-0x0cf7 window]
[    0.771924] pnp 00:00: >[io  0x03b0-0x03df window]
[    0.771925] pnp 00:00: >[io  0x0d00-0xffff window]
[    0.771927] pnp 00:00: >[mem 0x000a0000-0x000bffff]
[    0.771928] pnp 00:00: >[mem 0x000c0000-0x000dffff]
[    0.771930] pnp 00:00: >[mem 0xe0000000-0xffffffff]
[    0.771965] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.772025] pnp 00:01: >[mem 0xf014fb02-0xf0150b01]
[    0.772070] system 00:01: >[mem 0xf014fb02-0xf0150b01] has been reserved
[    0.778749] system 00:01: >Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.778765] pnp 00:02: >[irq 8]
[    0.778766] pnp 00:02: >[io  0x0070-0x0071]
[    0.778786] pnp 00:02: >Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.778794] pnp 00:03: >[io  0x0061]
[    0.778816] pnp 00:03: >Plug and Play ACPI device, IDs PNP0800 (active)
[    0.778825] pnp 00:04: >[dma 4]
[    0.778827] pnp 00:04: >[io  0x0000-0x000f]
[    0.778828] pnp 00:04: >[io  0x0081-0x0083]
[    0.778829] pnp 00:04: >[io  0x0087]
[    0.778831] pnp 00:04: >[io  0x0089-0x008b]
[    0.778832] pnp 00:04: >[io  0x008f]
[    0.778833] pnp 00:04: >[io  0x00c0-0x00df]
[    0.778852] pnp 00:04: >Plug and Play ACPI device, IDs PNP0200 (active)
[    0.778859] pnp 00:05: >[io  0x00f0-0x00ff]
[    0.778862] pnp 00:05: >[irq 13]
[    0.778883] pnp 00:05: >Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.778976] pnp: PnP ACPI: found 6 devices
[    0.783054] ACPI: ACPI bus type pnp unregistered
[    0.793938] pci 0000:00:14.4: >PCI bridge to [bus 01-01]
[    0.799240] pci 0000:00:15.0: >PCI bridge to [bus 02-02]
[    0.804538] pci 0000:00:15.1: >PCI bridge to [bus 03-03]
[    0.809837] pci 0000:00:15.1: >  bridge window [io  0x1000-0x1fff]
[    0.815997] pci 0000:00:15.1: >  bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.823822] pci_bus 0000:00: >resource 4 [io  0x0000-0x0cf7]
[    0.823824] pci_bus 0000:00: >resource 5 [io  0x0d00-0xffff]
[    0.823825] pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
[    0.823827] pci_bus 0000:00: >resource 7 [mem 0x000c0000-0x000dffff]
[    0.823828] pci_bus 0000:00: >resource 8 [mem 0xe0000000-0xffffffff]
[    0.823830] pci_bus 0000:01: >resource 4 [io  0x0000-0x0cf7]
[    0.823831] pci_bus 0000:01: >resource 5 [io  0x0d00-0xffff]
[    0.823833] pci_bus 0000:01: >resource 6 [mem 0x000a0000-0x000bffff]
[    0.823834] pci_bus 0000:01: >resource 7 [mem 0x000c0000-0x000dffff]
[    0.823835] pci_bus 0000:01: >resource 8 [mem 0xe0000000-0xffffffff]
[    0.823837] pci_bus 0000:03: >resource 0 [io  0x1000-0x1fff]
[    0.823838] pci_bus 0000:03: >resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.823862] NET: Registered protocol family 2
[    0.828370] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.836628] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.845853] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.852751] TCP: Hash tables configured (established 524288 bind 65536)
[    0.859344] TCP: reno registered
[    0.862568] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.868671] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.875252] NET: Registered protocol family 1
[    0.879607] pci 0000:00:01.0: >Boot video device
[    0.879860] PCI: CLS 64 bytes, default 64
[    0.879862] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.886283] software IO TLB [mem 0xbb12e000-0xbf12dfff] (64MB) mapped at [ffff8800bb12e000-ffff8800bf12dfff]
[    0.896448] LVT offset 0 assigned for vector 0x400
[    0.901297] perf: AMD IBS detected (0x000000ff)
[    0.906054] audit: initializing netlink socket (disabled)
[    0.911441] type=2000 audit(1398616624.732:1): initialized
[    0.933429] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.941670] VFS: Disk quotas dquot_6.5.2
[    0.945608] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.952489] fuse init (API version 7.19)
[    0.956462] msgmni has been set to 14896
[    0.960785] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.968255] io scheduler noop registered
[    0.972168] io scheduler deadline registered (default)
[    0.977309] io scheduler cfq registered
[    0.981250] pcieport 0000:00:15.0: >irq 40 for MSI/MSI-X
[    0.981336] pcieport 0000:00:15.1: >irq 41 for MSI/MSI-X
[    0.981406] pcieport 0000:00:15.0: >Signaling PME through PCIe PME interrupt
[    0.988431] pcie_pme 0000:00:15.0:pcie01: >service driver pcie_pme loaded
[    0.988448] pcieport 0000:00:15.1: >Signaling PME through PCIe PME interrupt
[    0.995468] pci 0000:03:00.0: >Signaling PME through PCIe PME interrupt
[    1.002059] pcie_pme 0000:00:15.1:pcie01: >service driver pcie_pme loaded
[    1.002075] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.007643] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.014321] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.022468] ACPI: Power Button [PWRB]
[    1.026153] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.033518] ACPI: Power Button [PWRF]
[    1.037214] ACPI: acpi_idle registered with cpuidle
[    1.038546] GHES: Failed to enable APEI firmware first mode.
[    1.044279] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.070903] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.077971] Linux agpgart interface v0.103
[    1.083152] brd: module loaded
[    1.086814] loop: module loaded
[    1.090019] ahci 0000:00:11.0: >version 3.0
[    1.090169] ahci 0000:00:11.0: >AHCI 0001.0300 32 slots 8 ports 6 Gbps 0x10 impl SATA mode
[    1.098406] ahci 0000:00:11.0: >flags: 64bit ncq sntf ilck led clo pio 
[    1.105563] scsi0 : ahci
[    1.108193] scsi1 : ahci
[    1.110851] scsi2 : ahci
[    1.113500] scsi3 : ahci
[    1.116157] scsi4 : ahci
[    1.118810] scsi5 : ahci
[    1.121461] scsi6 : ahci
[    1.124120] scsi7 : ahci
[    1.126684] ata1: DUMMY
[    1.129117] ata2: DUMMY
[    1.131557] ata3: DUMMY
[    1.133997] ata4: DUMMY
[    1.136438] ata5: SATA max UDMA/133 abar m2048@0xf014f000 port 0xf014f300 irq 19
[    1.143803] ata6: DUMMY
[    1.146247] ata7: DUMMY
[    1.148685] ata8: DUMMY
[    1.151393] Fixed MDIO Bus: probed
[    1.154818] tun: Universal TUN/TAP device driver, 1.6
[    1.159846] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.166116] PPP generic driver version 2.4.2
[    1.170484] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.177003] ehci_hcd 0000:00:12.2: >EHCI Host Controller
[    1.182295] ehci_hcd 0000:00:12.2: >new USB bus registered, assigned bus number 1
[    1.189753] ehci_hcd 0000:00:12.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.198518] QUIRK: Enable AMD PLL fix
[    1.198526] ehci_hcd 0000:00:12.2: >debug port 1
[    1.203145] ehci_hcd 0000:00:12.2: >irq 17, io mem 0xf014f800
[    1.217799] ehci_hcd 0000:00:12.2: >USB 2.0 started, EHCI 1.00
[    1.223638] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
[    1.230489] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.237770] usb usb1: >Product: EHCI Host Controller
[    1.242718] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[    1.249045] usb usb1: >SerialNumber: 0000:00:12.2
[    1.253913] hub 1-0:1.0: >USB hub found
[    1.257739] hub 1-0:1.0: >5 ports detected
[    1.261905] ehci_hcd 0000:00:13.2: >EHCI Host Controller
[    1.267203] ehci_hcd 0000:00:13.2: >new USB bus registered, assigned bus number 2
[    1.274658] ehci_hcd 0000:00:13.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.283414] ehci_hcd 0000:00:13.2: >debug port 1
[    1.288022] ehci_hcd 0000:00:13.2: >irq 17, io mem 0xf014f900
[    1.305480] ehci_hcd 0000:00:13.2: >USB 2.0 started, EHCI 1.00
[    1.311320] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
[    1.318166] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.325448] usb usb2: >Product: EHCI Host Controller
[    1.330394] usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[    1.336725] usb usb2: >SerialNumber: 0000:00:13.2
[    1.341581] hub 2-0:1.0: >USB hub found
[    1.345410] hub 2-0:1.0: >5 ports detected
[    1.349553] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.355744] ohci_hcd 0000:00:12.0: >OHCI Host Controller
[    1.361041] ohci_hcd 0000:00:12.0: >new USB bus registered, assigned bus number 3
[    1.368537] ohci_hcd 0000:00:12.0: >irq 18, io mem 0xf014c000
[    1.433018] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
[    1.439864] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.447142] usb usb3: >Product: OHCI Host Controller
[    1.452094] usb usb3: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
[    1.458419] usb usb3: >SerialNumber: 0000:00:12.0
[    1.463285] hub 3-0:1.0: >USB hub found
[    1.467115] hub 3-0:1.0: >5 ports detected
[    1.468847] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.477430] ohci_hcd 0000:00:13.0: >OHCI Host Controller
[    1.482726] ohci_hcd 0000:00:13.0: >new USB bus registered, assigned bus number 4
[    1.488167] ata5.00: ATA-8: WDC WD1600AAJS-00B4A0, 01.03A01, max UDMA/133
[    1.488169] ata5.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.489122] ata5.00: configured for UDMA/133
[    1.489310] scsi 4:0:0:0: >Direct-Access     ATA      WDC WD1600AAJS-0 01.0 PQ: 0 ANSI: 5
[    1.489431] sd 4:0:0:0: >Attached scsi generic sg0 type 0
[    1.489448] sd 4:0:0:0: >[sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.489498] sd 4:0:0:0: >[sda] Write Protect is off
[    1.489500] sd 4:0:0:0: >[sda] Mode Sense: 00 3a 00 00
[    1.489523] sd 4:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.543186] ohci_hcd 0000:00:13.0: >irq 18, io mem 0xf014d000
[    1.544512]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[    1.545237] sd 4:0:0:0: >[sda] Attached SCSI disk
[    1.616372] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
[    1.623233] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.630524] usb usb4: >Product: OHCI Host Controller
[    1.635478] usb usb4: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
[    1.641818] usb usb4: >SerialNumber: 0000:00:13.0
[    1.646695] hub 4-0:1.0: >USB hub found
[    1.650531] hub 4-0:1.0: >5 ports detected
[    1.654699] ohci_hcd 0000:00:14.5: >OHCI Host Controller
[    1.660000] ohci_hcd 0000:00:14.5: >new USB bus registered, assigned bus number 5
[    1.667465] ohci_hcd 0000:00:14.5: >irq 18, io mem 0xf014e000
[    1.731953] usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
[    1.738814] usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.746104] usb usb5: >Product: OHCI Host Controller
[    1.751060] usb usb5: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
[    1.757401] usb usb5: >SerialNumber: 0000:00:14.5
[    1.762266] hub 5-0:1.0: >USB hub found
[    1.766100] hub 5-0:1.0: >2 ports detected
[    1.770247] uhci_hcd: USB Universal Host Controller Interface driver
[    1.776625] xhci_hcd 0000:00:10.0: >xHCI Host Controller
[    1.781919] xhci_hcd 0000:00:10.0: >new USB bus registered, assigned bus number 6
[    1.789560] xhci_hcd 0000:00:10.0: >irq 18, io mem 0xf0148000
[    1.795340] xhci_hcd 0000:00:10.0: >irq 42 for MSI/MSI-X
[    1.795346] xhci_hcd 0000:00:10.0: >irq 43 for MSI/MSI-X
[    1.795350] xhci_hcd 0000:00:10.0: >irq 44 for MSI/MSI-X
[    1.795354] xhci_hcd 0000:00:10.0: >irq 45 for MSI/MSI-X
[    1.795360] xhci_hcd 0000:00:10.0: >irq 46 for MSI/MSI-X
[    1.795435] usb usb6: >New USB device found, idVendor=1d6b, idProduct=0002
[    1.802288] usb usb6: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.809575] usb usb6: >Product: xHCI Host Controller
[    1.814523] usb usb6: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
[    1.820860] usb usb6: >SerialNumber: 0000:00:10.0
[    1.825681] xHCI xhci_add_endpoint called for root hub
[    1.825682] xHCI xhci_check_bandwidth called for root hub
[    1.825699] hub 6-0:1.0: >USB hub found
[    1.829529] hub 6-0:1.0: >2 ports detected
[    1.833648] xhci_hcd 0000:00:10.0: >xHCI Host Controller
[    1.838938] xhci_hcd 0000:00:10.0: >new USB bus registered, assigned bus number 7
[    1.846418] usb usb7: >New USB device found, idVendor=1d6b, idProduct=0003
[    1.853263] usb usb7: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.860561] usb usb7: >Product: xHCI Host Controller
[    1.865510] usb usb7: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
[    1.871858] usb usb7: >SerialNumber: 0000:00:10.0
[    1.876665] xHCI xhci_add_endpoint called for root hub
[    1.876666] xHCI xhci_check_bandwidth called for root hub
[    1.876686] hub 7-0:1.0: >USB hub found
[    1.880513] hub 7-0:1.0: >2 ports detected
[    1.884752] xhci_hcd 0000:00:10.1: >xHCI Host Controller
[    1.890062] xhci_hcd 0000:00:10.1: >new USB bus registered, assigned bus number 8
[    1.897523] Refined TSC clocksource calibration: 3793.101 MHz.
[    1.903339] Switching to clocksource tsc
[    1.903588] xhci_hcd 0000:00:10.1: >irq 17, io mem 0xf014a000
[    1.903684] xhci_hcd 0000:00:10.1: >irq 47 for MSI/MSI-X
[    1.903692] xhci_hcd 0000:00:10.1: >irq 48 for MSI/MSI-X
[    1.903703] xhci_hcd 0000:00:10.1: >irq 49 for MSI/MSI-X
[    1.903716] xhci_hcd 0000:00:10.1: >irq 50 for MSI/MSI-X
[    1.903724] xhci_hcd 0000:00:10.1: >irq 51 for MSI/MSI-X
[    1.903907] usb usb8: >New USB device found, idVendor=1d6b, idProduct=0002
[    1.903910] usb usb8: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.903914] usb usb8: >Product: xHCI Host Controller
[    1.903917] usb usb8: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
[    1.903919] usb usb8: >SerialNumber: 0000:00:10.1
[    1.904147] xHCI xhci_add_endpoint called for root hub
[    1.904149] xHCI xhci_check_bandwidth called for root hub
[    1.904193] hub 8-0:1.0: >USB hub found
[    1.904202] hub 8-0:1.0: >2 ports detected
[    1.904316] xhci_hcd 0000:00:10.1: >xHCI Host Controller
[    1.904323] xhci_hcd 0000:00:10.1: >new USB bus registered, assigned bus number 9
[    1.906967] usb usb9: >New USB device found, idVendor=1d6b, idProduct=0003
[    1.906970] usb usb9: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.906972] usb usb9: >Product: xHCI Host Controller
[    1.906974] usb usb9: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
[    1.906977] usb usb9: >SerialNumber: 0000:00:10.1
[    1.907164] xHCI xhci_add_endpoint called for root hub
[    1.907164] xHCI xhci_check_bandwidth called for root hub
[    1.907203] hub 9-0:1.0: >USB hub found
[    1.907211] hub 9-0:1.0: >2 ports detected
[    2.003123] usbcore: registered new interface driver libusual
[    2.008890] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    2.266104] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.271223] mousedev: PS/2 mouse device common for all mice
[    2.276968] rtc_cmos 00:02: >RTC can wake from S4
[    2.281815] rtc_cmos 00:02: >rtc core: registered rtc_cmos as rtc0
[    2.287983] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[    2.294192] device-mapper: uevent: version 1.0.3
[    2.298912] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    2.307366] cpuidle: using governor ladder
[    2.311557] cpuidle: using governor menu
[    2.315462] EFI Variables Facility v0.08 2004-May-17
[    2.320642] ashmem: initialized
[    2.323929] TCP: cubic registered
[    2.327308] NET: Registered protocol family 10
[    2.331867] NET: Registered protocol family 17
[    2.336366] Key type dns_resolver registered
[    2.340807] PM: Hibernation image not present or could not be loaded.
[    2.340818] registered taskstats version 1
[    2.346963] Key type trusted registered
[    2.352299] Key type encrypted registered
[    2.358048]   Magic number: 10:295:642
[    2.361852] rtc_cmos 00:02: >setting system clock to 2014-04-27 16:37:07 UTC (1398616627)
[    2.370102] powernow-k8: Found 1 AMD A10-5800K APU with Radeon(tm) HD Graphics   (4 cpu cores) (version 2.20.00)
[    2.380288] powernow-k8: Core Performance Boosting: on.
[    2.385598] powernow-k8:    0 : pstate 0 (3800 MHz)
[    2.390465] powernow-k8:    1 : pstate 1 (3400 MHz)
[    2.395325] powernow-k8:    2 : pstate 2 (2900 MHz)
[    2.400194] powernow-k8:    3 : pstate 3 (2400 MHz)
[    2.405055] powernow-k8:    4 : pstate 4 (1900 MHz)
[    2.409920] powernow-k8:    5 : pstate 5 (1400 MHz)
[    2.415120] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.421103] EDD information not available.
[    2.427397] Freeing unused kernel memory: 928k freed
[    2.432542] Write protecting the kernel read-only data: 12288k
[    2.444553] Freeing unused kernel memory: 1472k freed
[    2.454800] Freeing unused kernel memory: 1124k freed
[    2.476047] udevd[110]: starting version 175
[    2.508313] sdhci: Secure Digital Host Controller Interface driver
[    2.514496] sdhci: Copyright(c) Pierre Ossman
[    2.519311] sdhci-pci 0000:00:14.7: >SDHCI controller found [1022:7806] (rev 0)
[    2.526648] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.526706] mmc0: no vmmc regulator found
[    2.526741] Registered led device: mmc0::
[    2.536564] r8169 0000:03:00.0: >irq 52 for MSI/MSI-X
[    2.536761] r8169 0000:03:00.0: >eth0: RTL8168f/8111f at 0xffffc90001794000, 08:60:6e:d4:a8:d8, XID 08000800 IRQ 52
[    2.547177] r8169 0000:03:00.0: >eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.556961] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
[    2.910885] EXT4-fs (sda7): INFO: recovery required on readonly filesystem
[    2.917745] EXT4-fs (sda7): write access will be enabled during recovery
[    3.673485] EXT4-fs (sda7): recovery complete
[    3.681739] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   13.680261] Adding 979928k swap on /dev/sda6.  Priority:-1 extents:1 across:979928k 
[   13.691928] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.713145] udevd[330]: starting version 175
[   13.770329] piix4_smbus 0000:00:14.0: >SMBus Host Controller at 0xb00, revision 0
[   13.771016] [drm] Initialized drm 1.1.0 20060810
[   13.773972] lp: driver loaded but no devices found
[   13.782407] [drm] radeon defaulting to kernel modesetting.
[   13.782410] [drm] radeon kernel modesetting enabled.
[   13.784818] [drm] initializing kernel modesetting (ARUBA 0x1002:0x9901 0x1002:0x9901).
[   13.784857] [drm] register mmio base: 0xF0100000
[   13.784858] [drm] register mmio size: 262144
[   13.784911] ATOM BIOS: 113
[   13.784936] radeon 0000:00:01.0: >VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[   13.784938] radeon 0000:00:01.0: >GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[   13.786251] [drm] Detected VRAM RAM=512M, BAR=256M
[   13.786254] [drm] RAM width 64bits DDR
[   13.786523] [TTM] Zone  kernel: Available graphics memory: 3815306 kiB
[   13.786525] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[   13.786527] [TTM] Initializing pool allocator
[   13.786531] [TTM] Initializing DMA pool allocator
[   13.786555] [drm] radeon: 512M of VRAM memory ready
[   13.786557] [drm] radeon: 512M of GTT memory ready.
[   13.786576] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   13.786577] [drm] Driver supports precise vblank timestamp query.
[   13.786608] radeon 0000:00:01.0: >irq 53 for MSI/MSI-X
[   13.786621] radeon 0000:00:01.0: >radeon: using MSI.
[   13.787146] [drm] radeon: irq initialized.
[   13.787150] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   13.787847] [drm] Loading ARUBA Microcode
[   13.797668] microcode: CPU0: patch_level=0x0600110f
[   13.927924] microcode: CPU0: new patch_level=0x06001119
[   13.927947] microcode: CPU1: patch_level=0x0600110f
[   13.944552] microcode: CPU1: new patch_level=0x06001119
[   13.944851] microcode: CPU2: patch_level=0x0600110f
[   13.960960] microcode: CPU2: new patch_level=0x06001119
[   13.960972] microcode: CPU3: patch_level=0x0600110f
[   13.962103] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[   13.962210] radeon 0000:00:01.0: >WB enabled
[   13.962213] radeon 0000:00:01.0: >fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801f98acc00
[   13.962215] radeon 0000:00:01.0: >fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff8801f98acc04
[   13.962216] radeon 0000:00:01.0: >fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff8801f98acc08
[   13.977042] microcode: CPU3: new patch_level=0x06001119
[   13.977247] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   13.982392] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[   13.986359] kvm: Nested Virtualization enabled
[   13.986363] kvm: Nested Paging enabled
[   13.995684] [drm] ring test on 0 succeeded in 2 usecs
[   13.996559] [drm] ib test on ring 0 succeeded in 0 usecs
[   14.011298] [drm] Radeon Display Connectors
[   14.011301] [drm] Connector 0:
[   14.011302] [drm]   HDMI-A-1
[   14.011303] [drm]   HPD1
[   14.011305] [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[   14.011305] [drm]   Encoders:
[   14.011307] [drm]     DFP1: INTERNAL_UNIPHY2
[   14.011307] [drm] Connector 1:
[   14.011308] [drm]   VGA-1
[   14.011309] [drm]   HPD2
[   14.011310] [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[   14.011311] [drm]   Encoders:
[   14.011311] [drm]     CRT1: INTERNAL_UNIPHY2
[   14.011312] [drm]     CRT1: NUTMEG
[   14.011313] [drm] Connector 2:
[   14.011313] [drm]   DVI-D-1
[   14.011314] [drm]   HPD3
[   14.011315] [drm]   DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[   14.011316] [drm]   Encoders:
[   14.011316] [drm]     DFP2: INTERNAL_UNIPHY
[   14.044447] init: failsafe main process (603) killed by TERM signal
[   14.061033] [drm] Internal thermal controller without fan control
[   14.061054] [drm] radeon: power management initialized
[   14.087103] Bluetooth: Core ver 2.16
[   14.087140] NET: Registered protocol family 31
[   14.087142] Bluetooth: HCI device and connection manager initialized
[   14.087403] Bluetooth: HCI socket layer initialized
[   14.087404] Bluetooth: L2CAP socket layer initialized
[   14.087409] Bluetooth: SCO socket layer initialized
[   14.090075] Bluetooth: RFCOMM TTY layer initialized
[   14.090080] Bluetooth: RFCOMM socket layer initialized
[   14.090082] Bluetooth: RFCOMM ver 1.11
[   14.093040] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.093043] Bluetooth: BNEP filters: protocol multicast
[   14.097518] ppdev: user-space parallel port driver
[   14.208383] r8169 0000:03:00.0: >eth4: link down
[   14.208408] r8169 0000:03:00.0: >eth4: link down
[   14.208900] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
[   14.209179] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
[   14.306430] [drm] fb mappable at 0xE1144000
[   14.306433] [drm] vram apper at 0xE0000000
[   14.306434] [drm] size 5242880
[   14.306435] [drm] fb depth is 24
[   14.306436] [drm]    pitch is 5120
[   14.306575] fbcon: radeondrmfb (fb0) is primary device
[   14.429744] Console: switching to colour frame buffer device 160x64
[   14.432199] fb0: radeondrmfb frame buffer device
[   14.432199] drm: registered panic notifier
[   14.432205] [drm] Initialized radeon 2.18.0 20080528 for 0000:00:01.0 on minor 0
[   14.432288] hda-intel: Force to non-snoop mode
[   14.432351] snd_hda_intel 0000:00:01.1: >irq 54 for MSI/MSI-X
[   14.459438] init: plymouth main process (249) killed by ABRT signal
[   14.459689] init: plymouth-splash main process (756) terminated with status 2
[   14.950716] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input2
[   14.950791] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input3
[   15.005889] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input4
[   15.005965] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input5
[   15.006025] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
[   15.006083] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
[   15.006141] input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
[   15.006200] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[   15.006259] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[   15.006317] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[   15.905312] init: plymouth-stop pre-start process (1338) terminated with status 1
[   16.507172] r8169 0000:03:00.0: >eth4: link up
[   16.508342] IPv6: ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready