| [ 0.000000] Linux version 4.14.50 (root@adam-X555LJ) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.10)) #2 SMP Tue Aug 7 22:57:33 CEST 2018 |
| [ 0.000000] Command line: bootfile=http://192.168.4.206:8000/menu.ipxe root=/dev/nfs rw ip=dhcp nfsroot=192.168.4.206:/srv/nfs/debian,vers=3,udp nfsrootdebug --- console=ttyS0,115200 earlyprint=serial,ttyS0,115200 |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfe90fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000cfe91000-0x00000000cfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012effffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.8 present. |
| [ 0.000000] DMI: PC Engines apu2/apu2, BIOS 4.11-2657-gbc41ccf12c 05/11/2020 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] e820: last_pfn = 0x12f000 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 00FF800000 mask FFFF800000 write-protect |
| [ 0.000000] 1 base 00C0000000 mask FFF0000000 write-back |
| [ 0.000000] 2 base 0080000000 mask FFC0000000 write-back |
| [ 0.000000] 3 base 0000000000 mask FF80000000 write-back |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] TOM2: 000000012f000000 aka 4848M |
| [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.000000] e820: last_pfn = 0xcfe91 max_arch_pfn = 0x400000000 |
| [ 0.000000] found SMP MP-table at [mem 0x000f6070-0x000f607f] mapped at [ffffffffff200070] |
| [ 0.000000] Base memory trampoline at [ffff960100096000] 96000 size 24576 |
| [ 0.000000] Using GB pages for direct mapping |
| [ 0.000000] BRK [0x99537000, 0x99537fff] PGTABLE |
| [ 0.000000] BRK [0x99538000, 0x99538fff] PGTABLE |
| [ 0.000000] BRK [0x99539000, 0x99539fff] PGTABLE |
| [ 0.000000] BRK [0x9953a000, 0x9953afff] PGTABLE |
| [ 0.000000] BRK [0x9953b000, 0x9953bfff] PGTABLE |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F6250 000024 (v02 COREv4) |
| [ 0.000000] ACPI: XSDT 0x00000000CFEA30E0 000074 (v01 COREv4 COREBOOT 00000000 CORE 20180531) |
| [ 0.000000] ACPI: FACP 0x00000000CFEA4A70 000114 (v06 COREv4 COREBOOT 00000000 CORE 20180531) |
| [ 0.000000] ACPI: DSDT 0x00000000CFEA3280 0017EF (v02 COREv4 COREBOOT 00010001 INTL 20180531) |
| [ 0.000000] ACPI: FACS 0x00000000CFEA3240 000040 |
| [ 0.000000] ACPI: SSDT 0x00000000CFEA4B90 0001EF (v02 COREv4 COREBOOT 0000002A CORE 20180531) |
| [ 0.000000] ACPI: MCFG 0x00000000CFEA4D80 00003C (v01 COREv4 COREBOOT 00000000 CORE 20180531) |
| [ 0.000000] ACPI: TPM2 0x00000000CFEA4DC0 00004C (v04 COREv4 COREBOOT 00000000 CORE 20180531) |
| [ 0.000000] ACPI: APIC 0x00000000CFEA4E10 00007E (v03 COREv4 COREBOOT 00000000 CORE 20180531) |
| [ 0.000000] ACPI: HEST 0x00000000CFEA4E90 0001D0 (v01 COREv4 COREBOOT 00000000 CORE 20180531) |
| [ 0.000000] ACPI: IVRS 0x00000000CFEA5060 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20180531) |
| [ 0.000000] ACPI: SSDT 0x00000000CFEA5130 0048A6 (v02 AMD AGESA 00000002 MSFT 04000000) |
| [ 0.000000] ACPI: SSDT 0x00000000CFEA99E0 0007C8 (v01 AMD AGESA 00000001 AMD 00000001) |
| [ 0.000000] ACPI: HPET 0x00000000CFEAA1B0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20180531) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] No NUMA configuration found |
| [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012effffff] |
| [ 0.000000] NODE_DATA(0) allocated [mem 0x12eff9000-0x12effdfff] |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.000000] Normal [mem 0x0000000100000000-0x000000012effffff] |
| [ 0.000000] Device empty |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cfe90fff] |
| [ 0.000000] node 0: [mem 0x0000000100000000-0x000000012effffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012effffff] |
| [ 0.000000] On node 0 totalpages: 1044015 |
| [ 0.000000] DMA zone: 64 pages used for memmap |
| [ 0.000000] DMA zone: 24 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 13243 pages used for memmap |
| [ 0.000000] DMA32 zone: 847505 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 3008 pages used for memmap |
| [ 0.000000] Normal zone: 192512 pages, LIFO batch:31 |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x818 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) |
| [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 |
| [ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) |
| [ 0.000000] ACPI: IRQ0 used by override. |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xcfe91000-0xcfffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xf7ffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xffffffff] |
| [ 0.000000] e820: [mem 0xd0000000-0xf7ffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| [ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x491 with crng_init=0 |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 |
| [ 0.000000] percpu: Embedded 44 pages/cpu @ffff96022ec00000 s141912 r8192 d30120 u524288 |
| [ 0.000000] pcpu-alloc: s141912 r8192 d30120 u524288 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1027676 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: bootfile=http://192.168.4.206:8000/menu.ipxe root=/dev/nfs rw ip=dhcp nfsroot=192.168.4.206:/srv/nfs/debian,vers=3,udp nfsrootdebug --- console=ttyS0,115200 earlyprint=serial,ttyS0,115200 |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.000000] Memory: 4017788K/4176060K available (12300K kernel code, 1588K rwdata, 3560K rodata, 1652K init, 688K bss, 158272K reserved, 0K cma-reserved) |
| [ 0.000000] ftrace: allocating 34192 entries in 134 pages |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| [ 0.000000] NR_IRQS: 33024, nr_irqs: 1000, preallocated irqs: 16 |
| [ 0.000000] Console: colour dummy device 80x25 |
| [ 0.000000] console [ttyS0] enabled |
| [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.004000] tsc: Detected 998.057 MHz processor |
| [ 0.008000] Calibrating delay loop (skipped), value calculated using timer frequency.. 1996.11 BogoMIPS (lpj=3992228) |
| [ 0.012008] pid_max: default: 32768 minimum: 301 |
| [ 0.016057] ACPI: Core revision 20170728 |
| [ 0.037237] ACPI: 4 ACPI AML tables successfully acquired and loaded |
| [ 0.040138] Security Framework initialized |
| [ 0.044009] Yama: becoming mindful. |
| [ 0.048024] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.054672] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.060620] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) |
| [ 0.064133] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.068055] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.072764] CPU: Physical Processor ID: 0 |
| [ 0.076008] CPU: Processor Core ID: 0 |
| [ 0.080009] mce: CPU supports 6 MCE banks |
| [ 0.084022] LVT offset 1 assigned for vector 0xf9 |
| [ 0.088017] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 |
| [ 0.092007] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0 |
| [ 0.096010] Spectre V2 : Mitigation: Full AMD retpoline |
| [ 0.100005] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch |
| [ 0.104009] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp |
| [ 0.145967] Freeing SMP alternatives memory: 32K |
| [ 0.153881] smpboot: Max logical packages: 1 |
| [ 0.160659] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.204000] smpboot: CPU0: AMD GX-412TC SOC (family: 0x16, model: 0x30, stepping: 0x1) |
| [ 0.208225] Performance Events: AMD PMU driver. |
| [ 0.212011] ... version: 0 |
| [ 0.216005] ... bit width: 48 |
| [ 0.220005] ... generic registers: 4 |
| [ 0.224006] ... value mask: 0000ffffffffffff |
| [ 0.228005] ... max period: 00007fffffffffff |
| [ 0.232005] ... fixed-purpose events: 0 |
| [ 0.236005] ... event mask: 000000000000000f |
| [ 0.240141] Hierarchical SRCU implementation. |
| [ 0.245579] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.248047] smp: Bringing up secondary CPUs ... |
| [ 0.252525] x86: Booting SMP configuration: |
| [ 0.256016] .... node #0, CPUs: #1 #2 #3 |
| [ 0.268091] smp: Brought up 1 node, 4 CPUs |
| [ 0.276008] smpboot: Total of 4 processors activated (7984.45 BogoMIPS) |
| [ 0.285057] devtmpfs: initialized |
| [ 0.288256] x86/mm: Memory block size: 128MB |
| [ 0.296992] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.300045] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| [ 0.304226] pinctrl core: initialized pinctrl subsystem |
| [ 0.308427] NET: Registered protocol family 16 |
| [ 0.316521] cpuidle: using governor ladder |
| [ 0.320043] cpuidle: using governor menu |
| [ 0.324245] ACPI: bus type PCI registered |
| [ 0.328009] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.332207] PCI: MMCONFIG for domain 0000 [bus 00-40] at [mem 0xf8000000-0xfc0fffff] (base 0xf8000000) |
| [ 0.344012] PCI: MMCONFIG at [mem 0xf8000000-0xfc0fffff] reserved in E820 |
| [ 0.352009] PCI: MMCONFIG for 0000 [bus00-1f] at [mem 0xf8000000-0xf9ffffff] (base 0xf8000000) (size reduced!) |
| [ 0.360032] PCI: Using configuration type 1 for base access |
| [ 0.368692] mtrr: your CPUs had inconsistent variable MTRR settings |
| [ 0.372007] mtrr: probably your BIOS does not setup all CPUs. |
| [ 0.380004] mtrr: corrected configuration. |
| [ 0.388145] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages |
| [ 0.392018] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.400269] ACPI: Added _OSI(Module Device) |
| [ 0.404009] ACPI: Added _OSI(Processor Device) |
| [ 0.408006] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.412006] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.416450] ACPI: Executed 3 blocks of module-level executable AML code |
| [ 0.436735] ACPI: Interpreter enabled |
| [ 0.440061] ACPI: (supports S0 S1 S4 S5) |
| [ 0.444007] ACPI: Using IOAPIC for interrupt routing |
| [ 0.448040] HEST: Table parsing has been initialized. |
| [ 0.452012] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.456154] ACPI: Enabled 7 GPEs in block 00 to 1F |
| [ 0.472054] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.476022] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.480200] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.484039] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge |
| [ 0.488141] acpi PNP0A08:00: host bridge window expanded to [io 0x0000-0x0cf7 window]; [io 0x03b0-0x03df window] ignored |
| [ 0.492514] PCI host bridge to bus 0000:00 |
| [ 0.496012] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.500009] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.504009] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.508009] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] |
| [ 0.512009] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff] |
| [ 0.516010] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.520025] pci 0000:00:00.0: [1022:1566] type 00 class 0x060000 |
| [ 0.520323] pci 0000:00:00.2: [1022:1567] type 00 class 0x080600 |
| [ 0.520621] pci 0000:00:02.0: [1022:156b] type 00 class 0x060000 |
| [ 0.520912] pci 0000:00:02.2: [1022:1439] type 01 class 0x060400 |
| [ 0.520975] pci 0000:00:02.2: enabling Extended Tags |
| [ 0.524083] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold |
| [ 0.524388] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400 |
| [ 0.524450] pci 0000:00:02.3: enabling Extended Tags |
| [ 0.528088] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold |
| [ 0.528379] pci 0000:00:02.4: [1022:1439] type 01 class 0x060400 |
| [ 0.528440] pci 0000:00:02.4: enabling Extended Tags |
| [ 0.532084] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold |
| [ 0.532353] pci 0000:00:02.5: [1022:1439] type 01 class 0x060400 |
| [ 0.532440] pci 0000:00:02.5: enabling Extended Tags |
| [ 0.536081] pci 0000:00:02.5: PME# supported from D0 D3hot D3cold |
| [ 0.536382] pci 0000:00:08.0: [1022:1537] type 00 class 0x108000 |
| [ 0.536412] pci 0000:00:08.0: reg 0x10: [mem 0xf7e80000-0xf7e9ffff 64bit pref] |
| [ 0.536423] pci 0000:00:08.0: reg 0x18: [mem 0xf7c00000-0xf7cfffff] |
| [ 0.536435] pci 0000:00:08.0: reg 0x1c: [mem 0xf7ea4000-0xf7ea4fff] |
| [ 0.536447] pci 0000:00:08.0: reg 0x20: [mem 0xf7d00000-0xf7dfffff] |
| [ 0.536458] pci 0000:00:08.0: reg 0x24: [mem 0xf7ea0000-0xf7ea1fff] |
| [ 0.536728] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330 |
| [ 0.536767] pci 0000:00:10.0: reg 0x10: [mem 0xf7ea2000-0xf7ea3fff 64bit] |
| [ 0.536905] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold |
| [ 0.540131] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601 |
| [ 0.540161] pci 0000:00:11.0: reg 0x10: [io 0x4010-0x4017] |
| [ 0.540175] pci 0000:00:11.0: reg 0x14: [io 0x4020-0x4023] |
| [ 0.540188] pci 0000:00:11.0: reg 0x18: [io 0x4018-0x401f] |
| [ 0.540201] pci 0000:00:11.0: reg 0x1c: [io 0x4024-0x4027] |
| [ 0.540215] pci 0000:00:11.0: reg 0x20: [io 0x4000-0x400f] |
| [ 0.540229] pci 0000:00:11.0: reg 0x24: [mem 0xf7ea5000-0xf7ea53ff] |
| [ 0.540318] pci 0000:00:11.0: PME# supported from D3hot |
| [ 0.540551] pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320 |
| [ 0.540580] pci 0000:00:13.0: reg 0x10: [mem 0xf7ea6000-0xf7ea60ff] |
| [ 0.540687] pci 0000:00:13.0: supports D1 D2 |
| [ 0.540691] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.540917] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500 |
| [ 0.541230] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100 |
| [ 0.541567] pci 0000:00:14.7: [1022:7813] type 00 class 0x080501 |
| [ 0.541598] pci 0000:00:14.7: reg 0x10: [mem 0xf7ea7000-0xf7ea70ff 64bit] |
| [ 0.541880] pci 0000:00:18.0: [1022:1580] type 00 class 0x060000 |
| [ 0.542201] pci 0000:00:18.1: [1022:1581] type 00 class 0x060000 |
| [ 0.542463] pci 0000:00:18.2: [1022:1582] type 00 class 0x060000 |
| [ 0.542699] pci 0000:00:18.3: [1022:1583] type 00 class 0x060000 |
| [ 0.542956] pci 0000:00:18.4: [1022:1584] type 00 class 0x060000 |
| [ 0.543191] pci 0000:00:18.5: [1022:1585] type 00 class 0x060000 |
| [ 0.543635] pci 0000:01:00.0: [8086:157b] type 00 class 0x020000 |
| [ 0.543716] pci 0000:01:00.0: reg 0x10: [mem 0xf7900000-0xf791ffff] |
| [ 0.543770] pci 0000:01:00.0: reg 0x18: [io 0x1000-0x101f] |
| [ 0.543805] pci 0000:01:00.0: reg 0x1c: [mem 0xf7920000-0xf7923fff] |
| [ 0.544096] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold |
| [ 0.556170] pci 0000:00:02.2: PCI bridge to [bus 01] |
| [ 0.560021] pci 0000:00:02.2: bridge window [io 0x1000-0x1fff] |
| [ 0.560029] pci 0000:00:02.2: bridge window [mem 0xf7900000-0xf79fffff] |
| [ 0.560292] pci 0000:02:00.0: [8086:157b] type 00 class 0x020000 |
| [ 0.560378] pci 0000:02:00.0: reg 0x10: [mem 0xf7a00000-0xf7a1ffff] |
| [ 0.560428] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x201f] |
| [ 0.560463] pci 0000:02:00.0: reg 0x1c: [mem 0xf7a20000-0xf7a23fff] |
| [ 0.560744] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold |
| [ 0.572182] pci 0000:00:02.3: PCI bridge to [bus 02] |
| [ 0.576021] pci 0000:00:02.3: bridge window [io 0x2000-0x2fff] |
| [ 0.576028] pci 0000:00:02.3: bridge window [mem 0xf7a00000-0xf7afffff] |
| [ 0.576291] pci 0000:03:00.0: [8086:157b] type 00 class 0x020000 |
| [ 0.576408] pci 0000:03:00.0: reg 0x10: [mem 0xf7b00000-0xf7b1ffff] |
| [ 0.576458] pci 0000:03:00.0: reg 0x18: [io 0x3000-0x301f] |
| [ 0.576497] pci 0000:03:00.0: reg 0x1c: [mem 0xf7b20000-0xf7b23fff] |
| [ 0.576756] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold |
| [ 0.588178] pci 0000:00:02.4: PCI bridge to [bus 03] |
| [ 0.592022] pci 0000:00:02.4: bridge window [io 0x3000-0x3fff] |
| [ 0.592029] pci 0000:00:02.4: bridge window [mem 0xf7b00000-0xf7bfffff] |
| [ 0.592237] pci 0000:04:00.0: [168c:003c] type 00 class 0x028000 |
| [ 0.592285] pci 0000:04:00.0: reg 0x10: [mem 0xf7600000-0xf77fffff 64bit] |
| [ 0.592350] pci 0000:04:00.0: reg 0x30: [mem 0xf7800000-0xf780ffff pref] |
| [ 0.592479] pci 0000:04:00.0: supports D1 D2 |
| [ 0.604169] pci 0000:00:02.5: PCI bridge to [bus 04] |
| [ 0.608025] pci 0000:00:02.5: bridge window [mem 0xf7600000-0xf78fffff] |
| [ 0.609230] ACPI: PCI Interrupt Link [INTA] (IRQs *3 4 5 7 10 11 12 15) |
| [ 0.612187] ACPI: PCI Interrupt Link [INTB] (IRQs *3 4 5 7 10 11 12 15) |
| [ 0.620205] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 *5 7 10 11 12 15) |
| [ 0.624157] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 *7 10 11 12 15) |
| [ 0.628155] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 *11 12 15) |
| [ 0.632155] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *10 |
| [ 0.636155] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.640153] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.648450] vgaarb: loaded |
| [ 0.650904] pps_core: LinuxPPS API ver. 1 registered |
| [ 0.652009] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 0.656019] PTP clock support registered |
| [ 0.660028] EDAC MC: Ver: 3.0.0 |
| [ 0.664217] PCI: Using ACPI for IRQ routing |
| [ 0.669117] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.669270] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.669275] e820: reserve RAM buffer [mem 0xcfe91000-0xcfffffff] |
| [ 0.669279] e820: reserve RAM buffer [mem 0x12f000000-0x12fffffff] |
| [ 0.669864] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 |
| [ 0.672009] hpet0: 3 comparators, 32-bit 14.318180 MHz counter |
| [ 0.680126] clocksource: Switched to clocksource hpet |
| [ 0.737303] VFS: Disk quotas dquot_6.6.0 |
| [ 0.741336] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.748492] pnp: PnP ACPI init |
| [ 0.752124] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved |
| [ 0.758772] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.758871] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.759336] pnp: PnP ACPI: found 2 devices |
| [ 0.775642] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.784591] pci 0000:00:02.2: PCI bridge to [bus 01] |
| [ 0.789577] pci 0000:00:02.2: bridge window [io 0x1000-0x1fff] |
| [ 0.795688] pci 0000:00:02.2: bridge window [mem 0xf7900000-0xf79fffff] |
| [ 0.802497] pci 0000:00:02.3: PCI bridge to [bus 02] |
| [ 0.807480] pci 0000:00:02.3: bridge window [io 0x2000-0x2fff] |
| [ 0.813591] pci 0000:00:02.3: bridge window [mem 0xf7a00000-0xf7afffff] |
| [ 0.820400] pci 0000:00:02.4: PCI bridge to [bus 03] |
| [ 0.825384] pci 0000:00:02.4: bridge window [io 0x3000-0x3fff] |
| [ 0.831497] pci 0000:00:02.4: bridge window [mem 0xf7b00000-0xf7bfffff] |
| [ 0.838305] pci 0000:00:02.5: PCI bridge to [bus 04] |
| [ 0.843294] pci 0000:00:02.5: bridge window [mem 0xf7600000-0xf78fffff] |
| [ 0.850106] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.850111] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.850116] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.850121] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] |
| [ 0.850125] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff] |
| [ 0.850130] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| [ 0.850135] pci_bus 0000:01: resource 1 [mem 0xf7900000-0xf79fffff] |
| [ 0.850140] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] |
| [ 0.850144] pci_bus 0000:02: resource 1 [mem 0xf7a00000-0xf7afffff] |
| [ 0.850150] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] |
| [ 0.850154] pci_bus 0000:03: resource 1 [mem 0xf7b00000-0xf7bfffff] |
| [ 0.850159] pci_bus 0000:04: resource 1 [mem 0xf7600000-0xf78fffff] |
| [ 0.850321] NET: Registered protocol family 2 |
| [ 0.855185] TCP established hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.862758] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) |
| [ 0.869682] TCP: Hash tables configured (established 32768 bind 32768) |
| [ 0.876337] UDP hash table entries: 2048 (order: 4, 65536 bytes) |
| [ 0.882408] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) |
| [ 0.889083] NET: Registered protocol family 1 |
| [ 0.894104] RPC: Registered named UNIX socket transport module. |
| [ 0.900040] RPC: Registered udp transport module. |
| [ 0.904758] RPC: Registered tcp transport module. |
| [ 0.909474] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 0.916891] pci 0000:00:13.0: PME# does not work under D3, disabling it |
| [ 0.923670] PCI: CLS 64 bytes, default 64 |
| [ 0.923845] AMD-Vi: IOMMU performance counters supported |
| [ 0.929383] pci 0000:00:00.2: can't derive routing for PCI INT A |
| [ 0.935410] pci 0000:00:00.2: PCI INT A: no GSI |
| [ 0.940379] iommu: Adding device 0000:00:02.0 to group 0 |
| [ 0.945953] iommu: Adding device 0000:00:02.2 to group 1 |
| [ 0.951493] iommu: Adding device 0000:00:02.3 to group 2 |
| [ 0.957074] iommu: Adding device 0000:00:02.4 to group 3 |
| [ 0.962662] iommu: Adding device 0000:00:02.5 to group 4 |
| [ 0.968230] iommu: Adding device 0000:00:08.0 to group 5 |
| [ 0.973772] iommu: Adding device 0000:00:10.0 to group 6 |
| [ 0.979338] iommu: Adding device 0000:00:11.0 to group 7 |
| [ 0.984905] iommu: Adding device 0000:00:13.0 to group 8 |
| [ 0.990473] iommu: Adding device 0000:00:14.0 to group 9 |
| [ 0.995848] iommu: Adding device 0000:00:14.3 to group 9 |
| [ 1.001217] iommu: Adding device 0000:00:14.7 to group 9 |
| [ 1.006837] iommu: Adding device 0000:00:18.0 to group 10 |
| [ 1.012297] iommu: Adding device 0000:00:18.1 to group 10 |
| [ 1.017756] iommu: Adding device 0000:00:18.2 to group 10 |
| [ 1.023215] iommu: Adding device 0000:00:18.3 to group 10 |
| [ 1.028674] iommu: Adding device 0000:00:18.4 to group 10 |
| [ 1.034125] iommu: Adding device 0000:00:18.5 to group 10 |
| [ 1.039783] iommu: Adding device 0000:01:00.0 to group 11 |
| [ 1.045433] iommu: Adding device 0000:02:00.0 to group 12 |
| [ 1.051069] iommu: Adding device 0000:03:00.0 to group 13 |
| [ 1.056725] iommu: Adding device 0000:04:00.0 to group 14 |
| [ 1.062180] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 |
| [ 1.067503] AMD-Vi: Extended features (0x800290ad2): |
| [ 1.072484] PPR GT IA GA PC GA_vAPIC |
| [ 1.076168] AMD-Vi: Interrupt remapping enabled |
| [ 1.080718] AMD-Vi: virtual APIC enabled |
| [ 1.131557] AMD-Vi: Lazy IO/TLB flushing enabled |
| [ 1.141953] amd_uncore: AMD NB counters detected |
| [ 1.146598] amd_uncore: AMD LLC counters detected |
| [ 1.151773] LVT offset 0 assigned for vector 0x400 |
| [ 1.156812] perf: AMD IBS detected (0x000000ff) |
| [ 1.161382] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). |
| [ 1.169606] audit: initializing netlink subsys (disabled) |
| [ 1.175204] audit: type=2000 audit(1543799326.172:1): state=initialized audit_enabled=0 res=1 |
| [ 1.176752] Initialise system trusted keyrings |
| [ 1.176962] workingset: timestamp_bits=40 max_order=20 bucket_order=0 |
| [ 1.194834] zbud: loaded |
| [ 1.198119] NFS: Registering the id_resolver key type |
| [ 1.203208] Key type id_resolver registered |
| [ 1.207410] Key type id_legacy registered |
| [ 1.211446] nfs4filelayout_init: NFSv4 File Layout Driver Registering... |
| [ 1.388721] Key type asymmetric registered |
| [ 1.392862] Asymmetric key parser 'x509' registered |
| [ 1.397835] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) |
| [ 1.405426] io scheduler noop registered |
| [ 1.409377] io scheduler deadline registered |
| [ 1.413719] io scheduler cfq registered (default) |
| [ 1.418446] io scheduler mq-deadline registered |
| [ 1.422993] io scheduler kyber registered |
| [ 1.429473] pcieport 0000:00:02.2: AER enabled with IRQ 26 |
| [ 1.435046] pcieport 0000:00:02.3: AER enabled with IRQ 28 |
| [ 1.440623] pcieport 0000:00:02.4: AER enabled with IRQ 30 |
| [ 1.446191] pcieport 0000:00:02.5: AER enabled with IRQ 32 |
| [ 1.451738] pcieport 0000:00:02.2: Signaling PME with IRQ 26 |
| [ 1.457455] pcieport 0000:00:02.3: Signaling PME with IRQ 28 |
| [ 1.463164] pcieport 0000:00:02.4: Signaling PME with IRQ 30 |
| [ 1.468875] pcieport 0000:00:02.5: Signaling PME with IRQ 32 |
| [ 1.475935] GHES: Failed to enable APEI firmware first mode. |
| [ 1.481895] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.508781] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 1.537205] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 1.565603] serial8250: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 1.594044] serial8250: ttyS3 at I/O 0x2e8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 1.602359] Linux agpgart interface v0.103 |
| [ 1.607045] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 1.614312] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI |
| [ 1.621377] e1000: Copyright (c) 1999-2006 Intel Corporation. |
| [ 1.627181] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| [ 1.633029] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| [ 1.639012] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k |
| [ 1.645986] igb: Copyright (c) 2007-2014 Intel Corporation. |
| [ 1.906395] pps pps0: new PPS source ptp0 |
| [ 1.910458] igb 0000:01:00.0: added PHC on eth0 |
| [ 1.915012] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection |
| [ 1.921901] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:43:3f:bc |
| [ 1.929050] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF |
| [ 1.934206] igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) |
| [ 2.172274] tsc: Refined TSC clocksource calibration: 998.128 MHz |
| [ 2.178423] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cc65d64e77, max_idle_ns: 881590512558 ns |
| [ 2.196477] pps pps1: new PPS source ptp1 |
| [ 2.200526] igb 0000:02:00.0: added PHC on eth1 |
| [ 2.205084] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection |
| [ 2.211972] igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:43:3f:bd |
| [ 2.219125] igb 0000:02:00.0: eth1: PBA No: FFFFFF-0FF |
| [ 2.224278] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) |
| [ 2.486863] pps pps2: new PPS source ptp2 |
| [ 2.490925] igb 0000:03:00.0: added PHC on eth2 |
| [ 2.495477] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection |
| [ 2.502369] igb 0000:03:00.0: eth2: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:43:3f:be |
| [ 2.509519] igb 0000:03:00.0: eth2: PBA No: FFFFFF-0FF |
| [ 2.514674] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) |
| [ 2.522455] i8042: PNP: No PS/2 controller found. |
| [ 2.527472] mousedev: PS/2 mouse device common for all mice |
| [ 2.533186] rtc_cmos 00:01: RTC can wake from S4 |
| [ 2.538052] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 |
| [ 2.544232] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs |
| [ 2.551339] IR NEC protocol handler initialized |
| [ 2.555890] IR RC5(x/sz) protocol handler initialized |
| [ 2.560956] IR RC6 protocol handler initialized |
| [ 2.565501] IR JVC protocol handler initialized |
| [ 2.570049] IR Sony protocol handler initialized |
| [ 2.574676] IR SANYO protocol handler initialized |
| [ 2.579391] IR Sharp protocol handler initialized |
| [ 2.584106] IR MCE Keyboard/mouse protocol handler initialized |
| [ 2.589948] IR XMP protocol handler initialized |
| [ 2.594778] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 2.601584] NET: Registered protocol family 10 |
| [ 2.607044] Segment Routing with IPv6 |
| [ 2.610771] mip6: Mobile IPv6 |
| [ 2.613760] NET: Registered protocol family 17 |
| [ 2.618255] mpls_gso: MPLS GSO support |
| [ 2.623143] microcode: CPU0: patch_level=0x07030105 |
| [ 2.628043] microcode: CPU1: patch_level=0x07030105 |
| [ 2.632983] microcode: CPU2: patch_level=0x07030105 |
| [ 2.637927] microcode: CPU3: patch_level=0x07030105 |
| [ 2.642970] microcode: Microcode Update Driver: v2.2. |
| [ 2.642997] sched_clock: Marking stable (2642948503, 0)->(2958382494, -315433991) |
| [ 2.656518] registered taskstats version 1 |
| [ 2.660637] Loading compiled-in X.509 certificates |
| [ 2.665498] zswap: loaded using pool lzo/zbud |
| [ 2.670849] rtc_cmos 00:01: setting system clock to 2018-12-03 01:08:49 UTC (1543799329) |
| [ 2.727042] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 2.780756] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready |
| [ 2.834459] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready |
| [ 3.196636] clocksource: Switched to clocksource tsc |
| [ 5.544873] igb 0000:02:00.0 eth1: igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX |
| [ 5.625086] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX |
| [ 5.672350] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready |
| [ 5.692284] Sending DHCP requests ., OK |
| [ 5.712166] IP-Config: Got DHCP answer from 192.168.10.1, my address is 192.168.10.178 |
| [ 5.720100] IP-Config: Complete: |
| [ 5.723365] device=eth1, hwaddr=00:0d:b9:43:3f:bd, ipaddr=192.168.10.178, mask=255.255.255.0, gw=192.168.10.1 |
| [ 5.733724] host=192.168.10.178, domain=, nis-domain=(none) |
| [ 5.739747] bootserver=192.168.10.1, rootserver=192.168.4.206, rootpath= nameserver0=192.168.10.1, nameserver1=192.168.10.1 |
| [ 5.752299] igb 0000:03:00.0 eth2: igb: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX |
| [ 5.822752] Root-NFS: nfsroot=/srv/nfs/debian,vers=3,udp |
| [ 5.828221] NFS: nfs mount opts='vers=2,udp,rsize=4096,wsize=4096,vers=3,udp,nolock,addr=192.168.4.206' |
| [ 5.837634] NFS: parsing nfs mount option 'vers=2' |
| [ 5.842616] NFS: parsing nfs mount option 'udp' |
| [ 5.847330] NFS: parsing nfs mount option 'rsize=4096' |
| [ 5.852762] NFS: parsing nfs mount option 'wsize=4096' |
| [ 5.858096] NFS: parsing nfs mount option 'vers=3' |
| [ 5.863085] NFS: parsing nfs mount option 'udp' |
| [ 5.867799] NFS: parsing nfs mount option 'nolock' |
| [ 5.872786] NFS: parsing nfs mount option 'addr=192.168.4.206' |
| [ 5.878841] NFS: MNTPATH: '/srv/nfs/debian' |
| [ 5.883056] NFS: sending MNT request for 192.168.4.206:/srv/nfs/debian |
| [ 5.900614] NFS: received 1 auth flavors |
| [ 5.904580] NFS: auth flavor[0]: 1 |
| [ 5.908265] NFS: MNT request succeeded |
| [ 5.912031] NFS: attempting to use auth flavor 1 |
| [ 5.923468] VFS: Mounted root (nfs filesystem) on device 0:18. |
| [ 7.827897] Freeing unused kernel memory: 1652K |
| [ 7.832469] Write protecting the kernel read-only data: 18432k |
| [ 7.845283] Freeing unused kernel memory: 2008K |
| [ 7.855133] Freeing unused kernel memory: 536K |
| [ 7.891469] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 7.920225] igb 0000:03:00.0: exceed max 2 second |
| [ 7.944249] random: fast init done |
| [ 8.304738] autofs4: module verification failed: signature and/or required key missing - tainting kernel |
| [ 8.333940] ip_tables: (C) 2000-2006 Netfilter Core Team |
| [ 8.359531] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 8.375490] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 8.388306] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) |
| [ 8.424841] systemd[1]: Detected architecture x86-64. |
| [ 8.451489] systemd[1]: Set hostname to <debian>. |
| [ 8.490239] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 9.026981] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| [ 9.052839] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 9.081726] systemd[1]: Listening on udev Control Socket. |
| [ 9.101781] systemd[1]: Listening on Journal Socket. |
| [ 9.120622] systemd[1]: Reached target Swap. |
| [ 9.140781] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 9.161241] systemd[1]: Created slice User and Session Slice. |
| [ 9.680336] igb 0000:01:00.0: exceed max 2 second |
| [ 9.863942] systemd-journald[120]: Received request to flush runtime journal from PID 1 |
| [ 10.224597] acpi_cpufreq: overriding BIOS provided _PSD data |
| [ 10.237580] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 |
| [ 10.249143] ACPI: Power Button [PWRB] |
| [ 10.261447] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 |
| [ 10.269866] ACPI: Power Button [PWRF] |
| [ 10.338917] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 10.395831] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 |
| [ 10.404197] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection |
| [ 10.414243] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16) |
| [ 10.421352] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 |
| [ 10.454260] ACPI: bus type USB registered |
| [ 10.457166] igb 0000:01:00.0 enp1s0: renamed from eth0 |
| [ 10.467521] ccp 0000:00:08.0: 5 command queues available |
| [ 10.474869] usbcore: registered new interface driver usbfs |
| [ 10.482008] usbcore: registered new interface driver hub |
| [ 10.490935] sdhci: Secure Digital Host Controller Interface driver |
| [ 10.491183] input: PC Speaker as /devices/platform/pcspkr/input/input2 |
| [ 10.497170] igb 0000:03:00.0 enp3s0: renamed from eth2 |
| [ 10.506877] usbcore: registered new device driver usb |
| [ 10.515611] sdhci: Copyright(c) Pierre Ossman |
| [ 10.518699] ccp 0000:00:08.0: ccp enabled |
| [ 10.518703] ccp 0000:00:08.0: enabled |
| [ 10.521372] SCSI subsystem initialized |
| [ 10.549263] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 10.559262] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 |
| [ 10.568885] sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x780b, Revision ID: 0x42 |
| [ 10.578419] sp5100_tco: I/O address 0x0cd6 already in use |
| [ 10.599485] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1) |
| [ 10.611824] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA 64-bit |
| [ 10.629151] ehci-pci: EHCI PCI platform driver |
| [ 10.637143] ehci-pci 0000:00:13.0: EHCI Host Controller |
| [ 10.643169] ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 1 |
| [ 10.652153] ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 10.661628] ehci-pci 0000:00:13.0: debug port 2 |
| [ 10.667634] libata version 3.00 loaded. |
| [ 10.667937] ehci-pci 0000:00:13.0: irq 18, io mem 0xf7ea6000 |
| [ 10.686578] ath10k_pci 0000:04:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 |
| [ 10.696846] ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00 |
| [ 10.697626] mmc0: new high speed SDHC card at address aaaa |
| [ 10.708981] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 10.716271] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 10.723652] usb usb1: Product: EHCI Host Controller |
| [ 10.728841] usb usb1: Manufacturer: Linux 4.14.50 ehci_hcd |
| [ 10.734585] usb usb1: SerialNumber: 0000:00:13.0 |
| [ 10.741331] hub 1-0:1.0: USB hub found |
| [ 10.746205] hub 1-0:1.0: 2 ports detected |
| [ 10.757927] xhci_hcd 0000:00:10.0: xHCI Host Controller |
| [ 10.766579] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 |
| [ 11.084082] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| [ 11.386353] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000410 |
| [ 11.395701] usb 1-1: New USB device found, idVendor=0438, idProduct=7900 |
| [ 11.397159] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 11.397193] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 11.397199] usb usb2: Product: xHCI Host Controller |
| [ 11.397203] usb usb2: Manufacturer: Linux 4.14.50 xhci-hcd |
| [ 11.397208] usb usb2: SerialNumber: 0000:00:10.0 |
| [ 11.397834] hub 2-0:1.0: USB hub found |
| [ 11.397882] hub 2-0:1.0: 2 ports detected |
| [ 11.398528] xhci_hcd 0000:00:10.0: xHCI Host Controller |
| [ 11.398571] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3 |
| [ 11.398584] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed |
| [ 11.398716] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. |
| [ 11.398824] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 |
| [ 11.398830] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 11.398835] usb usb3: Product: xHCI Host Controller |
| [ 11.398839] usb usb3: Manufacturer: Linux 4.14.50 xhci-hcd |
| [ 11.398843] usb usb3: SerialNumber: 0000:00:10.0 |
| [ 11.399442] hub 3-0:1.0: USB hub found |
| [ 11.399474] hub 3-0:1.0: 2 ports detected |
| [ 11.412181] ahci 0000:00:11.0: version 3.0 |
| [ 11.412990] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode |
| [ 11.412999] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part |
| [ 11.415592] scsi host0: ahci |
| [ 11.416129] scsi host1: ahci |
| [ 11.416341] ata1: SATA max UDMA/133 abar m1024@0xf7ea5000 port 0xf7ea5100 irq 19 |
| [ 11.416347] ata2: SATA max UDMA/133 abar m1024@0xf7ea5000 port 0xf7ea5180 irq 19 |
| [ 11.541936] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 11.551055] hub 1-1:1.0: USB hub found |
| [ 11.555813] hub 1-1:1.0: 4 ports detected |
| [ 11.583443] ath10k_pci 0000:04:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:04:00.0.bin failed with error -2 |
| [ 11.599025] ath10k_pci 0000:04:00.0: Direct firmware load for ath10k/cal-pci-0000:04:00.0.bin failed with error -2 |
| [ 11.617918] mmcblk0: mmc0:aaaa SC16G 14.8 GiB |
| [ 11.630797] mmcblk0: p1 p2 |
| [ 11.631289] ath10k_pci 0000:04:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2 |
| [ 11.654383] AVX version of gcm_enc/dec engaged. |
| [ 11.659363] AES CTR mode by8 optimization enabled |
| [ 11.683141] ath10k_pci 0000:04:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000 |
| [ 11.692495] ath10k_pci 0000:04:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0 |
| [ 11.701561] ath10k_pci 0000:04:00.0: firmware ver 10.2.4.70.54 api 5 features no-p2p,raw-mode,mfp crc32 9d340dd9 |
| [ 11.731080] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 11.740086] usb 2-1: new high-speed USB device number 2 using xhci_hcd |
| [ 11.753456] ath10k_pci 0000:04:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2 |
| [ 11.767247] ath10k_pci 0000:04:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08 |
| [ 11.896150] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 11.901907] usb 2-1: New USB device found, idVendor=0781, idProduct=5591 |
| [ 11.901913] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 11.901917] usb 2-1: Product: Ultra USB 3.0 |
| [ 11.901920] usb 2-1: Manufacturer: SanDisk |
| [ 11.901924] usb 2-1: SerialNumber: 4C530001250912120520 |
| [ 11.932429] ata1.00: ATA-11: 30GB SATA Flash Drive, SFPA703B, max UDMA/133 |
| [ 11.940117] ata1.00: 58626288 sectors, multi 16: LBA48 NCQ (depth 31/32), AA |
| [ 11.949874] ata1.00: configured for UDMA/133 |
| [ 11.955643] scsi 0:0:0:0: Direct-Access ATA 30GB SATA Flash 703B PQ: 0 ANSI: 5 |
| [ 12.000391] scsi 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 12.022558] sd 0:0:0:0: [sda] 58626288 512-byte logical blocks: (30.0 GB/28.0 GiB) |
| [ 12.031311] sd 0:0:0:0: [sda] Write Protect is off |
| [ 12.036121] usb 2-2: new high-speed USB device number 3 using xhci_hcd |
| [ 12.043406] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 12.043772] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 12.058750] random: crng init done |
| [ 12.059097] sda: sda1 sda2 |
| [ 12.063721] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 12.070248] random: 7 urandom warning(s) missed due to ratelimiting |
| [ 12.195677] usb 2-2: New USB device found, idVendor=0781, idProduct=5591 |
| [ 12.203626] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 12.211915] usb 2-2: Product: Ultra USB 3.0 |
| [ 12.216761] usb 2-2: Manufacturer: SanDisk |
| [ 12.221048] usb 2-2: SerialNumber: 4C530001010308112213 |
| [ 12.279829] usb-storage 2-1:1.0: USB Mass Storage device detected |
| [ 12.287069] scsi host2: usb-storage 2-1:1.0 |
| [ 12.292605] usb-storage 2-2:1.0: USB Mass Storage device detected |
| [ 12.300267] scsi host3: usb-storage 2-2:1.0 |
| [ 12.305981] usbcore: registered new interface driver usb-storage |
| [ 12.327639] usbcore: registered new interface driver uas |
| [ 12.624871] kvm: Nested Virtualization enabled |
| [ 12.630001] kvm: Nested Paging enabled |
| [ 12.937669] ath10k_pci 0000:04:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1 |
| [ 13.027797] ath: EEPROM regdomain: 0x0 |
| [ 13.027803] ath: EEPROM indicates default country code should be used |
| [ 13.027805] ath: doing EEPROM country->regdmn map search |
| [ 13.027809] ath: country maps to regdmn code: 0x3a |
| [ 13.027811] ath: Country alpha2 being used: US |
| [ 13.027813] ath: Regpair used: 0x3a |
| [ 13.043668] ath10k_pci 0000:04:00.0 wlp4s0: renamed from wlan0 |
| [ 13.309992] scsi 2:0:0:0: Direct-Access SanDisk Ultra USB 3.0 1.00 PQ: 0 ANSI: 6 |
| [ 13.320567] scsi 3:0:0:0: Direct-Access SanDisk Ultra USB 3.0 1.00 PQ: 0 ANSI: 6 |
| [ 13.324756] sd 2:0:0:0: Attached scsi generic sg1 type 0 |
| [ 13.325114] sd 2:0:0:0: [sdb] 30031250 512-byte logical blocks: (15.4 GB/14.3 GiB) |
| [ 13.329065] sd 2:0:0:0: [sdb] Write Protect is off |
| [ 13.329071] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00 |
| [ 13.334915] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA |
| [ 13.354003] sdb: sdb1 sdb2 |
| [ 13.356923] sd 2:0:0:0: [sdb] Attached SCSI removable disk |
| [ 13.370023] sd 3:0:0:0: Attached scsi generic sg2 type 0 |
| [ 13.370113] sd 3:0:0:0: [sdc] 30031872 512-byte logical blocks: (15.4 GB/14.3 GiB) |
| [ 13.372988] sd 3:0:0:0: [sdc] Write Protect is off |
| [ 13.372994] sd 3:0:0:0: [sdc] Mode Sense: 43 00 00 00 |
| [ 13.373769] sd 3:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA |
| [ 13.409374] sdc: sdc1 sdc2 |
| [ 13.417333] sd 3:0:0:0: [sdc] Attached SCSI removable disk |
| [ 13.777241] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready |
| [ 13.831581] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready |
| [ 13.917299] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready |
| [ 13.971011] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready |
| [ 14.044432] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready |
| [ 15.376060] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready |
| [ 16.765059] igb 0000:01:00.0 enp1s0: igb: enp1s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX |
| [ 16.787037] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready |
| [ 16.960836] igb 0000:03:00.0 enp3s0: igb: enp3s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX |
| [ 16.988436] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready |
| [ 17.093394] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready |
| [ 17.184470] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready |