[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
[    0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt 
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.2-204-g28a45d4-dirty 11/11/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000F8000000 mask FFFFFC000000 write-combining
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000180000000 aka 6144M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
[    0.000000]  [mem 0x17fe00000-0x17fffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
[    0.000000]  [mem 0x17c000000-0x17fdfffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
[    0.000000]  [mem 0x100000000-0x17bffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0xbfdfffff] page 2M
[    0.000000]  [mem 0xbfe00000-0xbff9afff] page 4k
[    0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000BFFB68D0 000074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000BFFB4280 002644 (v02 ASUS   COREBOOT 00000001 INTL 20150204)
[    0.000000] ACPI: FACS 0x00000000BFFB4240 000040
[    0.000000] ACPI: SSDT 0x00000000BFFB69D0 000EA6 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: TCPA 0x00000000BFFB7880 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x00000000BFFB78C0 0000C6 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000BFFB7990 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000BFFB7B08 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000BFFB7B40 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000BFFB7B80 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000BFFB7CF8 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xbfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
[    0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=3
[    0.000000] NUMA: node 2 [mem 0x00100000-0xbfffffff] overlaps with node 0 [mem 0x00100000-0xbfffffff]
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of physical nodes 2
[    0.000000] Node 0 MemBase 0000000000000000 Limit 0000000140000000
[    0.000000] Node 1 MemBase 0000000140000000 Limit 0000000180000000
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[    0.000000]   NODE_DATA [mem 0x13fffb000-0x13fffffff]
[    0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
[    0.000000]   NODE_DATA [mem 0x17fff9000-0x17fffdfff]
[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
[    0.000000]  [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x17fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xbff9afff]
[    0.000000]   node   0: [mem 0x100000000-0x13fffffff]
[    0.000000]   node   1: [mem 0x140000000-0x17fffffff]
[    0.000000] On node 0 totalpages: 1048377
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10695 pages used for memmap
[    0.000000]   DMA32 zone: 782235 pages, LIFO batch:31
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] On node 1 totalpages: 262144
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
[    0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 
[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1292581
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt 
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xf5ea000000-0xf5ebffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[    0.000000] Memory: 5017492K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224592K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1909.851 MHz processor
[    0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.70 BogoMIPS (lpj=7639404)
[    0.010795] pid_max: default: 32768 minimum: 301
[    0.015451] ACPI: Core revision 20140424
[    0.021812] ACPI: All ACPI Tables successfully acquired
[    0.027164] Security Framework initialized
[    0.031290] AppArmor: AppArmor disabled by boot time parameter
[    0.037134] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.044877] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.058096] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.067880] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.074782] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.082640] Initializing cgroup subsys memory
[    0.087021] Initializing cgroup subsys devices
[    0.091483] Initializing cgroup subsys freezer
[    0.095944] Initializing cgroup subsys net_cls
[    0.100404] Initializing cgroup subsys blkio
[    0.104689] Initializing cgroup subsys perf_event
[    0.109398] Initializing cgroup subsys net_prio
[    0.113978] tseg: 0000000000
[    0.113991] CPU: Physical Processor ID: 0
[    0.118010] CPU: Processor Core ID: 0
[    0.121682] mce: CPU supports 6 MCE banks
[    0.125711] LVT offset 0 assigned for vector 0xf9
[    0.130439] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.145788] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
[    0.154794] ftrace: allocating 21601 entries in 85 pages
[    0.170209] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.215728] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
[    0.332511] Performance Events: AMD PMU driver.
[    0.337080] ... version:                0
[    0.341094] ... bit width:              48
[    0.345192] ... generic registers:      4
[    0.349204] ... value mask:             0000ffffffffffff
[    0.354504] ... max period:             00007fffffffffff
[    0.359834] ... fixed-purpose events:   0
[    0.363843] ... event mask:             000000000000000f
[    0.371767] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.379970] x86: Booting SMP configuration:
[    0.384163] .... node  #0, CPUs:      #1 #2 #3
[    0.428512] .... node  #1, CPUs:   #4 #5 #6 #7
[    0.581145] x86: Booted up 2 nodes, 8 CPUs
[    0.585446] smpboot: Total of 8 processors activated (30558.04 BogoMIPS)
[    0.597964] devtmpfs: initialized
[    0.609903] pinctrl core: initialized pinctrl subsystem
[    0.615306] NET: Registered protocol family 16
[    0.619967] cpuidle: using governor ladder
[    0.624070] cpuidle: using governor menu
[    0.628007] node 0 link 1: io port [1000, 3fff]
[    0.628011] TOM: 00000000c0000000 aka 3072M
[    0.632204] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
[    0.632209] node 0 link 1: mmio [fc000000, fc3fffff]
[    0.632212] node 0 link 1: mmio [f8000000, fbffffff]
[    0.632214] TOM2: 0000000180000000 aka 6144M
[    0.636492] bus: [bus 00-05] on node 0 link 1
[    0.636494] bus: 00 [io  0x0000-0xffff]
[    0.636496] bus: 00 [mem 0xd0000000-0xffffffff]
[    0.636498] bus: 00 [mem 0x180000000-0xfcffffffff]
[    0.636604] ACPI: bus type PCI registered
[    0.640618] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.647225] PCI: Using configuration type 1 for base access
[    0.652797] PCI: Using configuration type 1 for extended access
[    0.669374] ACPI: Added _OSI(Module Device)
[    0.673569] ACPI: Added _OSI(Processor Device)
[    0.678018] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.682730] ACPI: Added _OSI(Processor Aggregator Device)
[    0.691651] ACPI: Interpreter enabled
[    0.695331] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.704605] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[    0.713860] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[    0.723131] ACPI: (supports S0 S1 S5)
[    0.726801] ACPI: Using IOAPIC for interrupt routing
[    0.731809] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.760247] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[    0.766436] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.774648] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.813591] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.823614] PCI host bridge to bus 0000:00
[    0.827719] pci_bus 0000:00: root bus resource [bus 00-05]
[    0.833209] pci_bus 0000:00: root bus resource [io  0x0d00-0x3fff]
[    0.839395] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.846275] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[    0.853153] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
[    0.860031] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.866221] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.866420] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[    0.866427] pci 0000:00:01.0: reg 0x10: [io  0x2c00-0x2c7f]
[    0.866578] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.866588] pci 0000:00:01.1: reg 0x10: [io  0x3000-0x301f]
[    0.866613] pci 0000:00:01.1: reg 0x20: [io  0x2c80-0x2cbf]
[    0.866621] pci 0000:00:01.1: reg 0x24: [io  0x2cc0-0x2cff]
[    0.866663] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.866762] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.866773] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
[    0.866799] pci 0000:00:02.0: supports D1 D2
[    0.866819] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.866892] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.872609] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.872618] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
[    0.872668] pci 0000:00:02.1: supports D1 D2
[    0.872678] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.872745] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.878474] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.878509] pci 0000:00:06.0: reg 0x20: [io  0x3020-0x302f]
[    0.878530] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.885669] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.892201] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.899339] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.905982] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.905993] pci 0000:00:07.0: reg 0x10: [io  0x3050-0x3057]
[    0.905998] pci 0000:00:07.0: reg 0x14: [io  0x3070-0x3073]
[    0.906002] pci 0000:00:07.0: reg 0x18: [io  0x3058-0x305f]
[    0.906007] pci 0000:00:07.0: reg 0x1c: [io  0x3074-0x3077]
[    0.906011] pci 0000:00:07.0: reg 0x20: [io  0x3030-0x303f]
[    0.906016] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
[    0.906135] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.906145] pci 0000:00:08.0: reg 0x10: [io  0x3060-0x3067]
[    0.906149] pci 0000:00:08.0: reg 0x14: [io  0x3078-0x307b]
[    0.906154] pci 0000:00:08.0: reg 0x18: [io  0x3068-0x306f]
[    0.906159] pci 0000:00:08.0: reg 0x1c: [io  0x307c-0x307f]
[    0.906163] pci 0000:00:08.0: reg 0x20: [io  0x3040-0x304f]
[    0.906168] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
[    0.906344] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[    0.906462] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.912187] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.912230] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.912281] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.918000] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.918055] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.918123] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.923845] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.923895] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.923948] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.929670] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.929719] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.929783] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.935516] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.935653] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.935772] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.935892] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.936015] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.936130] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[    0.936286] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[    0.936414] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[    0.936580] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[    0.936738] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[    0.936915] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[    0.936934] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.936945] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
[    0.936951] pci 0000:01:04.0: reg 0x18: [io  0x1000-0x107f]
[    0.936999] pci 0000:01:04.0: supports D1 D2
[    0.937117] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.942096] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    0.942100] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.942103] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    0.942222] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[    0.942270] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
[    0.942311] pci 0000:02:00.0: reg 0x30: [mem 0x7be00000-0x7be0ffff pref]
[    0.942390] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.942473] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.952472] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.957441] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.957550] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[    0.957586] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
[    0.957688] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.957788] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.967787] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.972756] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    0.972831] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.977871] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    0.982873] pci_bus 0000:00: on NUMA node 0
[    0.982976] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    0.989125] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    0.995265] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    1.002602] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    1.009912] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    1.017218] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[    1.024529] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    1.030676] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[    1.036822] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[    1.044173] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    1.051470] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    1.058763] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[    1.064900] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[    1.071052] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[    1.078371] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[    1.085675] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[    1.092992] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.101539] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[    1.108034] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[    1.114490] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[    1.120958] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[    1.127688] ACPI: Enabled 1 GPEs in block 00 to 1F
[    1.132809] vgaarb: setting as boot device: PCI:0000:01:04.0
[    1.138482] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[    1.146578] vgaarb: loaded
[    1.149294] vgaarb: bridge control possible 0000:01:04.0
[    1.154770] PCI: Using ACPI for IRQ routing
[    1.158967] PCI: pci_cache_line_size set to 64 bytes
[    1.159025] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.159028] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
[    1.159349] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.166399] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    1.171464] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    1.180159] Switched to clocksource hpet
[    1.195692] pnp: PnP ACPI init
[    1.198808] ACPI: bus type PNP registered
[    1.203370] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.203449] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.203549] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.203627] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.203667] pnp 00:04: [dma 2]
[    1.203710] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.203731] pnp: PnP ACPI: found 5 devices
[    1.207839] ACPI: bus type PNP unregistered
[    1.219879] pci 0000:02:00.0: can't claim BAR 6 [mem 0x7be00000-0x7be0ffff pref]: no compatible bridge window
[    1.229831] pci 0000:00:09.0: PCI bridge to [bus 01]
[    1.234809] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    1.240908] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    1.247700] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    1.254935] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
[    1.262161] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.267132] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    1.273927] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    1.278900] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    1.285693] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    1.290666] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.295640] pci_bus 0000:00: resource 4 [io  0x0d00-0x3fff]
[    1.295643] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[    1.295646] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
[    1.295648] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
[    1.295651] pci_bus 0000:00: resource 8 [io  0x0000-0x0cf7]
[    1.295654] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    1.295657] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[    1.295659] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[    1.295662] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
[    1.295665] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
[    1.295796] NET: Registered protocol family 2
[    1.300690] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.308390] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.315736] TCP: Hash tables configured (established 65536 bind 65536)
[    1.322347] TCP: reno registered
[    1.325606] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.331820] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.338603] NET: Registered protocol family 1
[    1.343348] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    1.349434] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.355341] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.360883] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.366377] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    1.371960] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.377507] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.383025] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    1.388612] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.394149] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.399660] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    1.405246] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.410796] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.416295] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    1.421880] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.427408] pci 0000:01:04.0: Video device with shadowed ROM
[    1.427417] PCI: CLS 64 bytes, default 64
[    1.427525] Unpacking initramfs...
[    1.660678] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
[    1.668545] PCI-DMA: Disabling AGP.
[    1.673612] PCI-DMA: aperture base @ b4000000 size 65536 KB
[    1.679196] PCI-DMA: using GART IOMMU.
[    1.682955] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.694982] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.703168] microcode: CPU0: patch_level=0x01000084
[    1.708057] microcode: CPU1: patch_level=0x01000084
[    1.712958] microcode: CPU2: patch_level=0x01000084
[    1.717860] microcode: CPU3: patch_level=0x01000084
[    1.722765] microcode: CPU4: patch_level=0x01000084
[    1.727656] microcode: CPU5: patch_level=0x01000084
[    1.732550] microcode: CPU6: patch_level=0x01000084
[    1.737447] microcode: CPU7: patch_level=0x01000084
[    1.742441] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.751241] LVT offset 1 assigned for vector 0x400
[    1.756052] IBS: LVT offset 1 assigned
[    1.759837] perf: AMD IBS detected (0x00000007)
[    1.764992] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.771377] audit: initializing netlink subsys (disabled)
[    1.776806] audit: type=2000 audit(1447273161.512:1): initialized
[    1.783687] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.790090] zbud: loaded
[    1.793007] VFS: Disk quotas dquot_6.5.2
[    1.796981] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.803522] msgmni has been set to 9945
[    1.807905] alg: No test for stdrng (krng)
[    1.812077] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.819574] io scheduler noop registered
[    1.823508] io scheduler deadline registered
[    1.827865] io scheduler cfq registered (default)
[    1.832784] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[    1.832908] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[    1.833034] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[    1.833159] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[    1.833320] aer 0000:00:0b.0:pcie02: service driver aer loaded
[    1.833349] aer 0000:00:0c.0:pcie02: service driver aer loaded
[    1.833374] aer 0000:00:0d.0:pcie02: service driver aer loaded
[    1.833401] aer 0000:00:0e.0:pcie02: service driver aer loaded
[    1.833420] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    1.840387] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.846922] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    1.846933] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    1.853896] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.860429] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    1.860439] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[    1.867403] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[    1.867413] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[    1.874377] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[    1.874408] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.880018] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.886753] GHES: HEST is not enabled!
[    1.890638] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.917226] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.944911] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.952838] Linux agpgart interface v0.103
[    1.957145] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[    1.967636] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.972623] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.977908] mousedev: PS/2 mouse device common for all mice
[    1.983583] rtc_cmos rtc_cmos: RTC can wake from S4
[    1.988706] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    1.995103] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    2.002968] ledtrig-cpu: registered to indicate activity on CPUs
[    2.009248] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.015693] AMD IOMMUv2 functionality not available on this system
[    2.022059] TCP: cubic registered
[    2.025524] NET: Registered protocol family 10
[    2.030364] mip6: Mobile IPv6
[    2.031706] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.041957] NET: Registered protocol family 17
[    2.046416] mpls_gso: MPLS GSO support
[    2.051013] registered taskstats version 1
[    2.055877] rtc_cmos rtc_cmos: setting system clock to 2015-11-11 20:19:23 UTC (1447273163)
[    2.064303] PM: Hibernation image not present or could not be loaded.
[    2.066107] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
[    2.073966] Write protecting the kernel read-only data: 8192k
[    2.083176] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
[    2.091780] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    2.115759] systemd-udevd[99]: starting version 215
[    2.121541] random: systemd-udevd urandom read with 4 bits of entropy available
[    2.151570] ACPI: bus type USB registered
[    2.155793] usbcore: registered new interface driver usbfs
[    2.161429] usbcore: registered new interface driver hub
[    2.166895] usbcore: registered new device driver usb
[    2.172692] pps_core: LinuxPPS API ver. 1 registered
[    2.177673] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.187080] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.193924] PTP clock support registered
[    2.198687] ehci-pci: EHCI PCI platform driver
[    2.198701] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.209688] ehci-pci 0000:00:02.1: EHCI Host Controller
[    2.214994] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    2.222456] ehci-pci 0000:00:02.1: debug port 1
[    2.222635] tg3.c:v3.137 (May 11, 2014)
[    2.222648] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[    2.222862] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[    2.242335] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    2.242366] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
[    2.259802] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.265631] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.272421] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.279225] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[    2.279228] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.279230] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.279232] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.279352] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[    2.279487] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[    2.325576] usb usb1: Product: EHCI Host Controller
[    2.330458] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.336562] usb usb1: SerialNumber: 0000:00:02.1
[    2.341411] hub 1-0:1.0: USB hub found
[    2.345178] hub 1-0:1.0: 10 ports detected
[    2.350291] ohci-pci: OHCI PCI platform driver
[    2.354906] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    2.360492] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.364670] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[    2.364672] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.364674] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.364676] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.402517] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
[    2.465775] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.472573] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.479796] usb usb2: Product: OHCI PCI host controller
[    2.485027] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.491126] usb usb2: SerialNumber: 0000:00:02.0
[    2.496020] hub 2-0:1.0: USB hub found
[    2.499795] hub 2-0:1.0: 10 ports detected
[    2.509462] FS-Cache: Loaded
[    2.516646] RPC: Registered named UNIX socket transport module.
[    2.523237] RPC: Registered udp transport module.
[    2.529332] RPC: Registered tcp transport module.
[    2.535423] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.547935] FS-Cache: Netfs 'nfs' registered for caching
[    2.561847] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[    2.607815] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    2.691657] tsc: Refined TSC clocksource calibration: 1909.786 MHz
[    3.695428] Switched to clocksource tsc
[    4.378606] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
[    4.385139] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[    4.392026] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    5.065588] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    5.079293] systemd[1]: Detected architecture 'x86-64'.
[    5.298847] systemd[1]: Inserted module 'autofs4'
[    5.304843] systemd[1]: Set hostname to <cb-test-tgt>.
[    5.383130] random: nonblocking pool is initialized
[    5.545602] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[    5.558331] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    5.573731] systemd[1]: Expecting device dev-ttyS0.device...
[    5.586787] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    5.594559] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.602159] systemd[1]: Starting Remote File Systems (Pre).
[    5.618705] systemd[1]: Reached target Remote File Systems (Pre).
[    5.624826] systemd[1]: Starting Encrypted Volumes.
[    5.638671] systemd[1]: Reached target Encrypted Volumes.
[    5.644141] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    5.666755] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.676229] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    5.684328] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.692268] systemd[1]: Starting Paths.
[    5.706647] systemd[1]: Reached target Paths.
[    5.711045] systemd[1]: Starting Swap.
[    5.722663] systemd[1]: Reached target Swap.
[    5.726960] systemd[1]: Starting Root Slice.
[    5.738642] systemd[1]: Created slice Root Slice.
[    5.743376] systemd[1]: Starting User and Session Slice.
[    5.758631] systemd[1]: Created slice User and Session Slice.
[    5.764404] systemd[1]: Starting Delayed Shutdown Socket.
[    5.778621] systemd[1]: Listening on Delayed Shutdown Socket.
[    5.784389] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    5.802639] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.809625] systemd[1]: Starting Journal Socket (/dev/log).
[    5.826612] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.832579] systemd[1]: Starting udev Kernel Socket.
[    5.846691] systemd[1]: Listening on udev Kernel Socket.
[    5.852091] systemd[1]: Starting udev Control Socket.
[    5.866593] systemd[1]: Listening on udev Control Socket.
[    5.872041] systemd[1]: Starting Journal Socket.
[    5.886576] systemd[1]: Listening on Journal Socket.
[    5.891591] systemd[1]: Starting System Slice.
[    5.906571] systemd[1]: Created slice System Slice.
[    5.911475] systemd[1]: Starting system-getty.slice.
[    5.926583] systemd[1]: Created slice system-getty.slice.
[    5.932006] systemd[1]: Starting system-serial\x2dgetty.slice.
[    5.946567] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    5.952895] systemd[1]: Starting Increase datagram queue length...
[    5.971635] systemd[1]: Starting udev Coldplug all Devices...
[    6.193847] systemd[1]: Starting Load Kernel Modules...
[    6.220964] systemd[1]: Started Set Up Additional Binary Formats.
[    6.227295] systemd[1]: Mounting Debug File System...
[    6.244188] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.267711] systemd[1]: Mounting POSIX Message Queue File System...
[    6.283823] systemd[1]: Mounting Huge Pages File System...
[    6.300024] systemd[1]: Starting Slices.
[    6.314512] systemd[1]: Reached target Slices.
[    6.319056] systemd[1]: Starting Remount Root and Kernel File Systems...
[    6.350488] systemd[1]: Mounted Huge Pages File System.
[    6.366471] systemd[1]: Mounted POSIX Message Queue File System.
[    6.382425] systemd[1]: Mounted Debug File System.
[    6.398488] systemd[1]: Started Increase datagram queue length.
[    6.414473] systemd[1]: Started Load Kernel Modules.
[    6.434447] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    6.454454] systemd[1]: Started Remount Root and Kernel File Systems.
[    6.470412] systemd[1]: Started udev Coldplug all Devices.
[    6.516332] systemd[1]: Started Various fixups to make systemd work better on Debian.
[    6.524197] systemd[1]: Starting Load/Save Random Seed...
[    6.539464] systemd[1]: Starting Create Static Device Nodes in /dev...
[    6.555369] systemd[1]: Starting Apply Kernel Variables...
[    6.571452] systemd[1]: Mounted Configuration File System.
[    6.577176] systemd[1]: Mounted FUSE Control File System.
[    6.582699] systemd[1]: Starting Syslog Socket.
[    6.598390] systemd[1]: Listening on Syslog Socket.
[    6.603352] systemd[1]: Starting Sockets.
[    6.614411] systemd[1]: Reached target Sockets.
[    6.619060] systemd[1]: Starting Journal Service...
[    6.646390] systemd[1]: Started Journal Service.
[    6.779922] systemd-udevd[189]: starting version 215
[    7.047325] systemd-journald[188]: Received request to flush runtime journal from PID 1
[    7.490466] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[    7.498443] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[    7.498686] EDAC MC: Ver: 3.0.0
[    7.510230] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.518902] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    7.528519] ACPI: Power Button [PWRB]
[    7.533644] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    7.542341] ACPI: Power Button [PWRF]
[    7.550502] SCSI subsystem initialized
[    7.562133] MCE: In-kernel MCE decoding enabled.
[    7.577889] FDC 0 is a post-1991 82077
[    7.626540] AMD64 EDAC driver v3.4.0
[    7.630216] EDAC amd64: DRAM ECC enabled.
[    7.634256] EDAC amd64: F10h detected (node 0).
[    7.638805] EDAC MC: DCT0 chip selects:
[    7.638807] EDAC amd64: MC: 0:     0MB 1:     0MB
[    7.643515] EDAC amd64: MC: 2:     0MB 3:     0MB
[    7.648227] EDAC amd64: MC: 4:     0MB 5:     0MB
[    7.652932] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[    7.657635] EDAC MC: DCT1 chip selects:
[    7.657637] EDAC amd64: MC: 0:     0MB 1:     0MB
[    7.662372] EDAC amd64: MC: 2:     0MB 3:     0MB
[    7.667104] EDAC amd64: MC: 4:     0MB 5:     0MB
[    7.671836] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[    7.676560] EDAC amd64: using x4 syndromes.
[    7.680776] EDAC amd64: MCT channel count: 2
[    7.681970] libata version 3.00 loaded.
[    7.685165] EDAC amd64: CS6: Registered DDR2 RAM
[    7.689845] EDAC amd64: CS7: Registered DDR2 RAM
[    7.694883] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[    7.694926] acpi-cpufreq: overriding BIOS provided _PSD data
[    7.710366] EDAC amd64: DRAM ECC enabled.
[    7.714456] EDAC amd64: F10h detected (node 1).
[    7.719099] EDAC MC: DCT0 chip selects:
[    7.719102] EDAC amd64: MC: 0:  1024MB 1:     0MB
[    7.723863] EDAC amd64: MC: 2:     0MB 3:     0MB
[    7.728608] EDAC amd64: MC: 4:     0MB 5:     0MB
[    7.733349] EDAC amd64: MC: 6:     0MB 7:     0MB
[    7.738101] EDAC MC: DCT1 chip selects:
[    7.738102] EDAC amd64: MC: 0:     0MB 1:     0MB
[    7.742841] EDAC amd64: MC: 2:     0MB 3:     0MB
[    7.747548] EDAC amd64: MC: 4:     0MB 5:     0MB
[    7.752278] EDAC amd64: MC: 6:     0MB 7:     0MB
[    7.757005] EDAC amd64: using x4 syndromes.
[    7.761217] EDAC amd64: MCT channel count: 1
[    7.761895] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    7.772103] EDAC amd64: CS0: Registered DDR2 RAM
[    7.776973] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
[    7.788186] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[    7.788259] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[    7.788298] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[    7.811649] pata_amd 0000:00:06.0: version 0.4.1
[    7.812871] scsi0 : pata_amd
[    7.816549] scsi1 : pata_amd
[    7.819635] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[    7.826738] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[    7.833977] sata_nv 0000:00:07.0: version 3.5
[    7.834369] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[    7.834711] kvm: Nested Virtualization enabled
[    7.834716] kvm: Nested Paging enabled
[    7.850084] scsi2 : sata_nv
[    7.853072] scsi3 : sata_nv
[    7.855944] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[    7.863088] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[    7.870550] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[    7.876858] scsi4 : sata_nv
[    7.879863] scsi5 : sata_nv
[    7.882723] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[    7.889850] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[    8.181782] ata3: SATA link down (SStatus 0 SControl 300)
[    8.205747] ata5: SATA link down (SStatus 0 SControl 300)
[    8.497662] ata4: SATA link down (SStatus 0 SControl 300)
[    8.813565] ata6: SATA link down (SStatus 0 SControl 300)
[   38.630864] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****