| [ 0.000000] microcode: microcode updated early to revision 0x20, date = 2018-04-10 |
| [ 0.000000] Linux version 4.18.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-29)) #1 SMP Debian 4.18.6-1 (2018-09-06) |
| [ 0.000000] Command line: BOOT_IMAGE=/@/boot/vmlinuz-4.18.0-1-amd64 root=UUID=89ce5cb3-28ea-4ba5-a558-7346f873a08d ro rootflags=subvol=@ intel_iommu=on rootflags=subvol=@ |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fee2fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000007fee3000-0x00000000829fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047d5fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: Sapphire Pure Platinum H61/Pure Platinum H61, BIOS 4.9-102-g09f7382935 01/01/2019 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] last_pfn = 0x47d600 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 000000000 mask F80000000 write-back |
| [ 0.000000] 1 base 0B0000000 mask FF0000000 write-combining |
| [ 0.000000] 2 base 0C0000000 mask FFE000000 write-combining |
| [ 0.000000] 3 base 0D0000000 mask FF0000000 write-combining |
| [ 0.000000] 4 base 100000000 mask F00000000 write-back |
| [ 0.000000] 5 base 200000000 mask E00000000 write-back |
| [ 0.000000] 6 base 400000000 mask F80000000 write-back |
| [ 0.000000] 7 disabled |
| [ 0.000000] 8 disabled |
| [ 0.000000] 9 disabled |
| [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.000000] last_pfn = 0x7fee3 max_arch_pfn = 0x400000000 |
| [ 0.000000] Base memory trampoline at [(____ptrval____)] 99000 size 24576 |
| [ 0.000000] BRK [0x43004b000, 0x43004bfff] PGTABLE |
| [ 0.000000] BRK [0x43004c000, 0x43004cfff] PGTABLE |
| [ 0.000000] BRK [0x43004d000, 0x43004dfff] PGTABLE |
| [ 0.000000] BRK [0x43004e000, 0x43004efff] PGTABLE |
| [ 0.000000] BRK [0x43004f000, 0x43004ffff] PGTABLE |
| [ 0.000000] BRK [0x430050000, 0x430050fff] PGTABLE |
| [ 0.000000] BRK [0x430051000, 0x430051fff] PGTABLE |
| [ 0.000000] RAMDISK: [mem 0x34911000-0x3647ffff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F6770 000024 (v02 COREv4) |
| [ 0.000000] ACPI: XSDT 0x000000007FEE90E0 000054 (v01 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x000000007FEEB7B0 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x000000007FEE9280 002525 (v02 COREv4 COREBOOT 20141018 INTL 20180810) |
| [ 0.000000] ACPI: FACS 0x000000007FEE9240 000040 |
| [ 0.000000] ACPI: FACS 0x000000007FEE9240 000040 |
| [ 0.000000] ACPI: SSDT 0x000000007FEEB8B0 002A79 (v02 COREv4 COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: MCFG 0x000000007FEEE330 00003C (v01 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x000000007FEEE370 00008C (v02 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DMAR 0x000000007FEEE400 0000A8 (v01 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x000000007FEEE4B0 000038 (v01 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] No NUMA configuration found |
| [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000047d5fffff] |
| [ 0.000000] NODE_DATA(0) allocated [mem 0x47d5ee000-0x47d5f2fff] |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.000000] Normal [mem 0x0000000100000000-0x000000047d5fffff] |
| [ 0.000000] Device empty |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007fee2fff] |
| [ 0.000000] node 0: [mem 0x0000000100000000-0x000000047d5fffff] |
| [ 0.000000] Reserved but unavailable: 383 pages |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000047d5fffff] |
| [ 0.000000] On node 0 totalpages: 4183169 |
| [ 0.000000] DMA zone: 64 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 8124 pages used for memmap |
| [ 0.000000] DMA32 zone: 519907 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 57176 pages used for memmap |
| [ 0.000000] Normal zone: 3659264 pages, LIFO batch:31 |
| [ 0.000000] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff] |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: IRQ0 used by override. |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs |
| [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x7fee3000-0x829fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfed8ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff] |
| [ 0.000000] [mem 0x82a00000-0xefffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| [ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x52e with crng_init=0 |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 |
| [ 0.000000] percpu: Embedded 44 pages/cpu @(____ptrval____) s142744 r8192 d29288 u262144 |
| [ 0.000000] pcpu-alloc: s142744 r8192 d29288 u262144 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4117784 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-4.18.0-1-amd64 root=UUID=89ce5cb3-28ea-4ba5-a558-7346f873a08d ro rootflags=subvol=@ intel_iommu=on rootflags=subvol=@ |
| [ 0.000000] DMAR: IOMMU enabled |
| [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.000000] Memory: 16351976K/16732676K available (10252K kernel code, 1222K rwdata, 3252K rodata, 1552K init, 656K bss, 380700K reserved, 0K cma-reserved) |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 |
| [ 0.000000] Kernel/User page tables isolation: enabled |
| [ 0.000000] ftrace: allocating 31237 entries in 123 pages |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 |
| [ 0.000000] NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16 |
| [ 0.000000] Console: colour dummy device 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] ACPI: Core revision 20180531 |
| [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] APIC: Switch to symmetric I/O mode setup |
| [ 0.000000] DMAR: Host address width 36 |
| [ 0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| [ 0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| [ 0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| [ 0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| [ 0.000000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 |
| [ 0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| [ 0.000000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| [ 0.000000] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| [ 0.000000] x2apic enabled |
| [ 0.000000] Switched APIC routing to cluster x2apic. |
| [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.020000] tsc: Fast TSC calibration using PIT |
| [ 0.024000] tsc: Detected 3392.451 MHz processor |
| [ 0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30e67306b3e, max_idle_ns: 440795230997 ns |
| [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.90 BogoMIPS (lpj=13569804) |
| [ 0.024000] pid_max: default: 32768 minimum: 301 |
| [ 0.024000] Security Framework initialized |
| [ 0.024000] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.024000] AppArmor: AppArmor initialized |
| [ 0.029039] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) |
| [ 0.030075] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.030116] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.030149] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.030319] mce: CPU supports 9 MCE banks |
| [ 0.030328] CPU0: Thermal monitoring enabled (TM1) |
| [ 0.030338] process: using mwait in idle threads |
| [ 0.030341] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| [ 0.030342] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.030345] Spectre V2 : Mitigation: Full generic retpoline |
| [ 0.030346] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.030348] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier |
| [ 0.030349] Spectre V2 : Enabling Restricted Speculation for firmware calls |
| [ 0.030351] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp |
| [ 0.030423] Freeing SMP alternatives memory: 24K |
| [ 0.031160] TSC deadline timer enabled |
| [ 0.031163] smpboot: CPU0: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz (family: 0x6, model: 0x3a, stepping: 0x9) |
| [ 0.031237] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| [ 0.031256] ... version: 3 |
| [ 0.031257] ... bit width: 48 |
| [ 0.031258] ... generic registers: 4 |
| [ 0.031259] ... value mask: 0000ffffffffffff |
| [ 0.031261] ... max period: 00007fffffffffff |
| [ 0.031262] ... fixed-purpose events: 3 |
| [ 0.031263] ... event mask: 000000070000000f |
| [ 0.031292] Hierarchical SRCU implementation. |
| [ 0.031899] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.031913] smp: Bringing up secondary CPUs ... |
| [ 0.031972] x86: Booting SMP configuration: |
| [ 0.031974] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 |
| [ 0.044051] smp: Brought up 1 node, 8 CPUs |
| [ 0.044051] smpboot: Max logical packages: 1 |
| [ 0.044051] smpboot: Total of 8 processors activated (54279.21 BogoMIPS) |
| [ 0.048352] devtmpfs: initialized |
| [ 0.048352] x86/mm: Memory block size: 128MB |
| [ 0.048935] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.048935] futex hash table entries: 2048 (order: 5, 131072 bytes) |
| [ 0.048935] pinctrl core: initialized pinctrl subsystem |
| [ 0.048935] NET: Registered protocol family 16 |
| [ 0.048935] audit: initializing netlink subsys (disabled) |
| [ 0.048935] audit: type=2000 audit(1546428947.048:1): state=initialized audit_enabled=0 res=1 |
| [ 0.048935] cpuidle: using governor ladder |
| [ 0.048935] cpuidle: using governor menu |
| [ 0.048935] ACPI: bus type PCI registered |
| [ 0.048935] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.048935] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.048935] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| [ 0.048935] PCI: Using configuration type 1 for base access |
| [ 0.048935] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| [ 0.048935] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.048935] ACPI: Added _OSI(Module Device) |
| [ 0.048935] ACPI: Added _OSI(Processor Device) |
| [ 0.048935] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.048935] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.048935] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.052514] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.053425] ACPI: Interpreter enabled |
| [ 0.053438] ACPI: (supports S0 S3 S4 S5) |
| [ 0.053440] ACPI: Using IOAPIC for interrupt routing |
| [ 0.053455] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.055434] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.055439] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.055473] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] |
| [ 0.055480] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.055519] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6bff]) |
| [ 0.055637] PCI host bridge to bus 0000:00 |
| [ 0.055640] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.055642] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.055644] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.055647] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.055649] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.055652] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] |
| [ 0.055655] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] |
| [ 0.055657] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.055659] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.055661] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.055664] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.055666] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.055668] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.055670] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.055673] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.055675] pci_bus 0000:00: root bus resource [mem 0x82a00001-0xefffffff window] |
| [ 0.055677] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.055680] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.055687] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000 |
| [ 0.055755] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 |
| [ 0.055781] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold |
| [ 0.055835] pci 0000:00:02.0: [8086:0162] type 00 class 0x030000 |
| [ 0.055844] pci 0000:00:02.0: reg 0x10: [mem 0xe1400000-0xe17fffff 64bit] |
| [ 0.055849] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| [ 0.055853] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] |
| [ 0.055954] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 |
| [ 0.056046] pci 0000:00:16.0: reg 0x10: [mem 0xe1a08000-0xe1a0800f 64bit] |
| [ 0.056365] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold |
| [ 0.056471] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 |
| [ 0.056492] pci 0000:00:1a.0: reg 0x10: [mem 0xe1a05000-0xe1a053ff] |
| [ 0.056572] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.056633] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 |
| [ 0.056653] pci 0000:00:1b.0: reg 0x10: [mem 0xe1a00000-0xe1a03fff 64bit] |
| [ 0.056722] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.056787] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 |
| [ 0.056915] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.056941] pci 0000:00:1c.0: Enabling MPC IRBNCE |
| [ 0.056946] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled |
| [ 0.057013] pci 0000:00:1c.1: [8086:1c18] type 01 class 0x060400 |
| [ 0.057090] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.057107] pci 0000:00:1c.1: Enabling MPC IRBNCE |
| [ 0.057111] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled |
| [ 0.057170] pci 0000:00:1c.4: [8086:1c1a] type 01 class 0x060400 |
| [ 0.057248] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold |
| [ 0.057264] pci 0000:00:1c.4: Enabling MPC IRBNCE |
| [ 0.057268] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled |
| [ 0.057329] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 |
| [ 0.057350] pci 0000:00:1d.0: reg 0x10: [mem 0xe1a06000-0xe1a063ff] |
| [ 0.057429] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.057488] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100 |
| [ 0.057639] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 |
| [ 0.057657] pci 0000:00:1f.2: reg 0x10: [io 0x3060-0x3067] |
| [ 0.057665] pci 0000:00:1f.2: reg 0x14: [io 0x3070-0x3073] |
| [ 0.057672] pci 0000:00:1f.2: reg 0x18: [io 0x3068-0x306f] |
| [ 0.057680] pci 0000:00:1f.2: reg 0x1c: [io 0x3074-0x3077] |
| [ 0.057688] pci 0000:00:1f.2: reg 0x20: [io 0x3040-0x305f] |
| [ 0.057696] pci 0000:00:1f.2: reg 0x24: [mem 0xe1a04000-0xe1a047ff] |
| [ 0.057737] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.057790] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 |
| [ 0.057808] pci 0000:00:1f.3: reg 0x10: [mem 0xe1a07000-0xe1a070ff 64bit] |
| [ 0.057827] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.057912] pci 0000:01:00.0: [10de:1401] type 00 class 0x030000 |
| [ 0.057922] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xe0ffffff] |
| [ 0.057928] pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref] |
| [ 0.057934] pci 0000:01:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref] |
| [ 0.057938] pci 0000:01:00.0: reg 0x24: [io 0x1000-0x107f] |
| [ 0.057942] pci 0000:01:00.0: reg 0x30: [mem 0xe1000000-0xe107ffff pref] |
| [ 0.058005] pci 0000:01:00.1: [10de:0fba] type 00 class 0x040300 |
| [ 0.058013] pci 0000:01:00.1: reg 0x10: [mem 0xe1080000-0xe1083fff] |
| [ 0.058083] pci 0000:00:01.0: PCI bridge to [bus 01] |
| [ 0.058086] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] |
| [ 0.058087] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe10fffff] |
| [ 0.058090] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref] |
| [ 0.058144] pci 0000:00:1c.0: PCI bridge to [bus 02] |
| [ 0.058221] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330 |
| [ 0.058274] pci 0000:03:00.0: reg 0x10: [mem 0xe1800000-0xe1807fff 64bit] |
| [ 0.058476] pci 0000:03:00.0: PME# supported from D3hot D3cold |
| [ 0.058578] pci 0000:00:1c.1: PCI bridge to [bus 03] |
| [ 0.058584] pci 0000:00:1c.1: bridge window [mem 0xe1800000-0xe18fffff] |
| [ 0.058777] pci 0000:04:00.0: [11ab:4380] type 00 class 0x020000 |
| [ 0.059059] pci 0000:04:00.0: reg 0x10: [mem 0xe1920000-0xe1923fff 64bit] |
| [ 0.059159] pci 0000:04:00.0: reg 0x18: [io 0x2000-0x20ff] |
| [ 0.059521] pci 0000:04:00.0: reg 0x30: [mem 0xe1900000-0xe191ffff pref] |
| [ 0.060075] pci 0000:04:00.0: supports D1 D2 |
| [ 0.060076] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.060677] pci 0000:00:1c.4: PCI bridge to [bus 04] |
| [ 0.060681] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] |
| [ 0.060685] pci 0000:00:1c.4: bridge window [mem 0xe1900000-0xe19fffff] |
| [ 0.060714] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.060714] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.060714] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.060714] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.060714] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.060714] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.060714] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.060714] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.060717] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.060717] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.060717] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none |
| [ 0.060717] pci 0000:01:00.0: vgaarb: bridge control possible |
| [ 0.060717] pci 0000:00:02.0: vgaarb: no bridge control possible |
| [ 0.060717] vgaarb: loaded |
| [ 0.060717] pps_core: LinuxPPS API ver. 1 registered |
| [ 0.060717] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 0.060717] PTP clock support registered |
| [ 0.060717] EDAC MC: Ver: 3.0.0 |
| [ 0.060717] PCI: Using ACPI for IRQ routing |
| [ 0.061417] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.061505] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.061506] e820: reserve RAM buffer [mem 0x7fee3000-0x7fffffff] |
| [ 0.061507] e820: reserve RAM buffer [mem 0x47d600000-0x47fffffff] |
| [ 0.061574] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.061574] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.065015] clocksource: Switched to clocksource tsc-early |
| [ 0.070963] VFS: Disk quotas dquot_6.6.0 |
| [ 0.070978] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.070988] AppArmor: AppArmor Filesystem Enabled |
| [ 0.070988] pnp: PnP ACPI init |
| [ 0.070988] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.070988] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.070988] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.070988] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.070988] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved |
| [ 0.070988] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.070988] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.070988] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.070988] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved |
| [ 0.070988] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved |
| [ 0.070988] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.070988] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.070988] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.070988] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.070988] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.070988] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.070988] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.070988] pnp: PnP ACPI: found 4 devices |
| [ 0.076810] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.076847] pci 0000:00:01.0: PCI bridge to [bus 01] |
| [ 0.076850] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] |
| [ 0.076853] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe10fffff] |
| [ 0.076856] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref] |
| [ 0.076860] pci 0000:00:1c.0: PCI bridge to [bus 02] |
| [ 0.076878] pci 0000:00:1c.1: PCI bridge to [bus 03] |
| [ 0.076884] pci 0000:00:1c.1: bridge window [mem 0xe1800000-0xe18fffff] |
| [ 0.076892] pci 0000:00:1c.4: PCI bridge to [bus 04] |
| [ 0.076896] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] |
| [ 0.076901] pci 0000:00:1c.4: bridge window [mem 0xe1900000-0xe19fffff] |
| [ 0.076911] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.076912] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.076913] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.076914] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.076915] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window] |
| [ 0.076916] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window] |
| [ 0.076917] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window] |
| [ 0.076918] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window] |
| [ 0.076919] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window] |
| [ 0.076920] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window] |
| [ 0.076921] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window] |
| [ 0.076922] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window] |
| [ 0.076923] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window] |
| [ 0.076924] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window] |
| [ 0.076925] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window] |
| [ 0.076926] pci_bus 0000:00: resource 19 [mem 0x82a00001-0xefffffff window] |
| [ 0.076927] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window] |
| [ 0.076928] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| [ 0.076929] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe10fffff] |
| [ 0.076930] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref] |
| [ 0.076931] pci_bus 0000:03: resource 1 [mem 0xe1800000-0xe18fffff] |
| [ 0.076932] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] |
| [ 0.076933] pci_bus 0000:04: resource 1 [mem 0xe1900000-0xe19fffff] |
| [ 0.076981] NET: Registered protocol family 2 |
| [ 0.077095] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes) |
| [ 0.077132] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) |
| [ 0.077277] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 0.077380] TCP: Hash tables configured (established 131072 bind 65536) |
| [ 0.077408] UDP hash table entries: 8192 (order: 6, 262144 bytes) |
| [ 0.077443] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) |
| [ 0.077496] NET: Registered protocol family 1 |
| [ 0.077506] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.077829] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0 |
| [ 0.078210] PCI: CLS 64 bytes, default 64 |
| [ 0.078238] Unpacking initramfs... |
| [ 0.399732] Freeing initrd memory: 28092K |
| [ 0.399828] DMAR: No RMRR found |
| [ 0.399830] DMAR: No ATSR found |
| [ 0.399863] DMAR: dmar0: Using Queued invalidation |
| [ 0.399869] DMAR: dmar1: Using Queued invalidation |
| [ 0.399878] DMAR: Setting RMRR: |
| [ 0.399880] DMAR: Prepare 0-16MiB unity mapping for LPC |
| [ 0.399924] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff] |
| [ 0.399996] DMAR: Intel(R) Virtualization Technology for Directed I/O |
| [ 0.400085] iommu: Adding device 0000:00:00.0 to group 0 |
| [ 0.400097] iommu: Adding device 0000:00:01.0 to group 1 |
| [ 0.400103] iommu: Adding device 0000:00:02.0 to group 2 |
| [ 0.400111] iommu: Adding device 0000:00:16.0 to group 3 |
| [ 0.400119] iommu: Adding device 0000:00:1a.0 to group 4 |
| [ 0.400126] iommu: Adding device 0000:00:1b.0 to group 5 |
| [ 0.400133] iommu: Adding device 0000:00:1c.0 to group 6 |
| [ 0.400140] iommu: Adding device 0000:00:1c.1 to group 7 |
| [ 0.400147] iommu: Adding device 0000:00:1c.4 to group 8 |
| [ 0.400154] iommu: Adding device 0000:00:1d.0 to group 9 |
| [ 0.400166] iommu: Adding device 0000:00:1f.0 to group 10 |
| [ 0.400172] iommu: Adding device 0000:00:1f.2 to group 10 |
| [ 0.400179] iommu: Adding device 0000:00:1f.3 to group 10 |
| [ 0.400184] iommu: Adding device 0000:01:00.0 to group 1 |
| [ 0.400188] iommu: Adding device 0000:01:00.1 to group 1 |
| [ 0.400195] iommu: Adding device 0000:03:00.0 to group 11 |
| [ 0.400202] iommu: Adding device 0000:04:00.0 to group 12 |
| [ 0.400380] DMAR: DRHD: handling fault status reg 3 |
| [ 0.400383] DMAR: [DMA Write] Request device [00:02.0] fault addr 80d00000 [fault reason 01] Present bit in root entry is clear |
| [ 0.400387] DMAR: DRHD: handling fault status reg 3 |
| [ 0.400389] DMAR: [DMA Write] Request device [00:02.0] fault addr 80d3c000 [fault reason 01] Present bit in root entry is clear |
| [ 0.400883] DMAR: DRHD: handling fault status reg 3 |
| [ 0.400886] DMAR: [DMA Write] Request device [00:02.0] fault addr 80d40000 [fault reason 01] Present bit in root entry is clear |
| [ 0.400889] DMAR: DRHD: handling fault status reg 3 |
| [ 0.401943] Initialise system trusted keyrings |
| [ 0.401981] workingset: timestamp_bits=40 max_order=22 bucket_order=0 |
| [ 0.402874] zbud: loaded |
| [ 0.403070] pstore: using deflate compression |
| [ 0.415531] random: fast init done |
| [ 0.645795] Key type asymmetric registered |
| [ 0.645798] Asymmetric key parser 'x509' registered |
| [ 0.645829] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) |
| [ 0.645858] io scheduler noop registered |
| [ 0.645859] io scheduler deadline registered |
| [ 0.645888] io scheduler cfq registered (default) |
| [ 0.645890] io scheduler mq-deadline registered |
| [ 0.646405] pcieport 0000:00:01.0: Signaling PME with IRQ 26 |
| [ 0.646431] pcieport 0000:00:1c.0: Signaling PME with IRQ 27 |
| [ 0.646451] pcieport 0000:00:1c.1: Signaling PME with IRQ 28 |
| [ 0.646468] pcieport 0000:00:1c.4: Signaling PME with IRQ 29 |
| [ 0.646487] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 0.646497] intel_idle: MWAIT substates: 0x1120 |
| [ 0.646498] intel_idle: v0.4.1 model 0x3A |
| [ 0.646688] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 0.647325] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 0.647747] Linux agpgart interface v0.103 |
| [ 0.647778] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 0.647780] AMD IOMMUv2 functionality not available on this system |
| [ 0.648163] i8042: PNP: No PS/2 controller found. |
| [ 0.648165] i8042: Probing ports directly. |
| [ 1.684696] i8042: No controller found |
| [ 1.684789] mousedev: PS/2 mouse device common for all mice |
| [ 1.684814] rtc_cmos 00:03: RTC can wake from S4 |
| [ 1.684965] rtc_cmos 00:03: registered as rtc0 |
| [ 1.684977] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 1.684985] intel_pstate: Intel P-state driver initializing |
| [ 1.685429] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 1.685815] NET: Registered protocol family 10 |
| [ 1.691974] Segment Routing with IPv6 |
| [ 1.692017] mip6: Mobile IPv6 |
| [ 1.692022] NET: Registered protocol family 17 |
| [ 1.692029] mpls_gso: MPLS GSO support |
| [ 1.692710] microcode: sig=0x306a9, pf=0x2, revision=0x20 |
| [ 1.692903] microcode: Microcode Update Driver: v2.2. |
| [ 1.692917] sched_clock: Marking stable (1692895930, 0)->(1676616860, 16279070) |
| [ 1.693281] registered taskstats version 1 |
| [ 1.693285] Loading compiled-in X.509 certificates |
| [ 1.729577] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff' |
| [ 1.729591] zswap: loaded using pool lzo/zbud |
| [ 1.729682] AppArmor: AppArmor sha1 policy hashing enabled |
| [ 1.729904] rtc_cmos 00:03: setting system clock to 2019-01-02 11:35:49 UTC (1546428949) |
| [ 1.730904] Freeing unused kernel image memory: 1552K |
| [ 1.768045] Write protecting the kernel read-only data: 16384k |
| [ 1.768820] Freeing unused kernel image memory: 2028K |
| [ 1.769117] Freeing unused kernel image memory: 844K |
| [ 1.780887] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.780889] x86/mm: Checking user space page tables |
| [ 1.786054] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.842081] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 |
| [ 1.842104] ACPI: Power Button [PWRF] |
| [ 1.842525] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 1.842658] ACPI Error: Divide by zero (20180531/utmath-478) |
| [ 1.842663] ACPI Error: Method parse/execution failed \_SB.PCI0.GFX0.LEGA.DRCL, AE_AML_DIVIDE_BY_ZERO (20180531/psparse-516) |
| [ 1.842669] ACPI Error: Method parse/execution failed \_SB.PCI0.GFX0.LEGA.XBQC, AE_AML_DIVIDE_BY_ZERO (20180531/psparse-516) |
| [ 1.842673] ACPI Error: Method parse/execution failed \_SB.PCI0.GFX0.XBQC, AE_AML_DIVIDE_BY_ZERO (20180531/psparse-516) |
| [ 1.842677] ACPI Error: Method parse/execution failed \_SB.PCI0.GFX0.LCD0._BQC, AE_AML_DIVIDE_BY_ZERO (20180531/psparse-516) |
| [ 1.842682] ACPI Warning: Evaluating _BQC failed (20180531/video-622) |
| [ 1.842925] acpi device:0d: registered as cooling_device8 |
| [ 1.842992] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input1 |
| [ 1.846424] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 1.846751] sky2: driver version 1.30 |
| [ 1.847231] sky2 0000:04:00.0: Yukon-2 UL 2 chip revision 0 |
| [ 1.848416] sky2 0000:04:00.0 eth0: addr dc:9c:52:07:d2:6b |
| [ 1.850447] ACPI: bus type USB registered |
| [ 1.850465] usbcore: registered new interface driver usbfs |
| [ 1.850476] usbcore: registered new interface driver hub |
| [ 1.850507] usbcore: registered new device driver usb |
| [ 1.855243] SCSI subsystem initialized |
| [ 1.855399] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 1.855564] cryptd: max_cpu_qlen set to 1000 |
| [ 1.859190] libata version 3.00 loaded. |
| [ 1.860675] ehci-pci: EHCI PCI platform driver |
| [ 1.861347] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 1.861357] AVX version of gcm_enc/dec engaged. |
| [ 1.861358] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| [ 1.861364] AES CTR mode by8 optimization enabled |
| [ 1.861372] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 1.861587] ahci 0000:00:1f.2: version 3.0 |
| [ 1.861729] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 1.865365] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 1.866378] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe1a05000 |
| [ 1.872099] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode |
| [ 1.872104] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 1.872613] scsi host0: ahci |
| [ 1.872706] scsi host1: ahci |
| [ 1.872774] scsi host2: ahci |
| [ 1.872838] scsi host3: ahci |
| [ 1.872911] scsi host4: ahci |
| [ 1.872974] scsi host5: ahci |
| [ 1.873013] ata1: SATA max UDMA/133 abar m2048@0xe1a04000 port 0xe1a04100 irq 31 |
| [ 1.873016] ata2: SATA max UDMA/133 abar m2048@0xe1a04000 port 0xe1a04180 irq 31 |
| [ 1.873018] ata3: DUMMY |
| [ 1.873019] ata4: DUMMY |
| [ 1.873022] ata5: SATA max UDMA/133 abar m2048@0xe1a04000 port 0xe1a04300 irq 31 |
| [ 1.873026] ata6: SATA max UDMA/133 abar m2048@0xe1a04000 port 0xe1a04380 irq 31 |
| [ 1.880010] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 1.880065] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 |
| [ 1.880069] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.880073] usb usb1: Product: EHCI Host Controller |
| [ 1.880075] usb usb1: Manufacturer: Linux 4.18.0-1-amd64 ehci_hcd |
| [ 1.880078] usb usb1: SerialNumber: 0000:00:1a.0 |
| [ 1.880220] hub 1-0:1.0: USB hub found |
| [ 1.880228] hub 1-0:1.0: 3 ports detected |
| [ 1.880365] xhci_hcd 0000:03:00.0: xHCI Host Controller |
| [ 1.880372] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2 |
| [ 1.882815] [drm] VT-d active for gfx access |
| [ 1.882823] [drm] Replacing VGA console driver |
| [ 1.882833] [drm] DMAR active, disabling use of stolen memory |
| [ 1.882874] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 1.882876] [drm] Driver supports precise vblank timestamp query. |
| [ 1.882882] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window] |
| [ 1.882887] caller pci_map_rom+0x58/0xe0 mapping multiple BARs |
| [ 1.882890] i915 0000:00:02.0: Invalid PCI ROM data signature: expecting 0x52494350, got 0xe936aa55 |
| [ 1.882892] [drm] Failed to find VBIOS tables (VBT) |
| [ 1.883067] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem |
| [ 1.890147] xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000 |
| [ 1.890480] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 |
| [ 1.890484] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.890487] usb usb2: Product: xHCI Host Controller |
| [ 1.890490] usb usb2: Manufacturer: Linux 4.18.0-1-amd64 xhci-hcd |
| [ 1.890492] usb usb2: SerialNumber: 0000:03:00.0 |
| [ 1.890686] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0 |
| [ 1.890700] hub 2-0:1.0: USB hub found |
| [ 1.890715] hub 2-0:1.0: 2 ports detected |
| [ 1.890853] xhci_hcd 0000:03:00.0: xHCI Host Controller |
| [ 1.890855] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 1.890863] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 |
| [ 1.890864] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 |
| [ 1.890867] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed |
| [ 1.890885] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 1.890895] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. |
| [ 1.890917] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18 |
| [ 1.890921] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.890924] usb usb4: Product: xHCI Host Controller |
| [ 1.890926] usb usb4: Manufacturer: Linux 4.18.0-1-amd64 xhci-hcd |
| [ 1.890929] usb usb4: SerialNumber: 0000:03:00.0 |
| [ 1.891039] hub 4-0:1.0: USB hub found |
| [ 1.891055] hub 4-0:1.0: 2 ports detected |
| [ 1.894841] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 1.894856] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe1a06000 |
| [ 1.908041] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 1.908177] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 |
| [ 1.908184] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.908189] usb usb3: Product: EHCI Host Controller |
| [ 1.908192] usb usb3: Manufacturer: Linux 4.18.0-1-amd64 ehci_hcd |
| [ 1.908196] usb usb3: SerialNumber: 0000:00:1d.0 |
| [ 1.908469] hub 3-0:1.0: USB hub found |
| [ 1.908482] hub 3-0:1.0: 3 ports detected |
| [ 2.028174] fbcon: inteldrmfb (fb0) is primary device |
| [ 2.083982] [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* uncleared fifo underrun on pipe A |
| [ 2.084034] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun |
| [ 2.084096] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A |
| [ 2.084148] [drm:cpt_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun |
| [ 2.088026] tsc: Refined TSC clocksource calibration: 3392.293 MHz |
| [ 2.088036] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e5de2a436, max_idle_ns: 440795285127 ns |
| [ 2.088059] clocksource: Switched to clocksource tsc |
| [ 2.089103] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 2.100012] Console: switching to colour frame buffer device 240x67 |
| [ 2.103959] ata1.00: ATA-8: KINGSTON SH103S3120G, 526ABBF0, max UDMA/133 |
| [ 2.103962] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA |
| [ 2.116367] ata1.00: configured for UDMA/133 |
| [ 2.116566] scsi 0:0:0:0: Direct-Access ATA KINGSTON SH103S3 BBF0 PQ: 0 ANSI: 5 |
| [ 2.124230] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| [ 2.212046] usb 3-1: new high-speed USB device number 2 using ehci-pci |
| [ 2.216048] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| [ 2.368457] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 2.368514] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.368883] hub 3-1:1.0: USB hub found |
| [ 2.369072] hub 3-1:1.0: 6 ports detected |
| [ 2.372490] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 2.372547] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.373028] hub 1-1:1.0: USB hub found |
| [ 2.373195] hub 1-1:1.0: 4 ports detected |
| [ 2.430747] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 2.445335] ata2.00: ATA-8: KINGSTON SH103S3120G, 526ABBF0, max UDMA/133 |
| [ 2.445388] ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA |
| [ 2.455223] ata2.00: configured for UDMA/133 |
| [ 2.455439] scsi 1:0:0:0: Direct-Access ATA KINGSTON SH103S3 BBF0 PQ: 0 ANSI: 5 |
| [ 2.656046] usb 3-1.2: new high-speed USB device number 3 using ehci-pci |
| [ 2.770723] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 2.837723] usb 3-1.2: New USB device found, idVendor=046d, idProduct=082b, bcdDevice=28.25 |
| [ 2.837782] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.837828] usb 3-1.2: Product: Webcam C170 |
| [ 2.837859] usb 3-1.2: Manufacturer: |
| [ 2.920041] usb 3-1.3: new full-speed USB device number 4 using ehci-pci |
| [ 3.029950] usb 3-1.3: New USB device found, idVendor=0d8c, idProduct=0014, bcdDevice= 1.00 |
| [ 3.030009] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 3.030055] usb 3-1.3: Product: USB Audio Device |
| [ 3.030088] usb 3-1.3: Manufacturer: C-Media Electronics Inc. |
| [ 3.033806] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 3.035818] usbcore: registered new interface driver usbhid |
| [ 3.038162] usbhid: USB HID core driver |
| [ 3.042261] input: C-Media Electronics Inc. USB Audio Device as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3:1.3/0003:0D8C:0014.0001/input/input2 |
| [ 3.082600] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 3.091638] ata6.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7 |
| [ 3.094036] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32), AA |
| [ 3.103179] ata6.00: configured for UDMA/133 |
| [ 3.104165] hid-generic 0003:0D8C:0014.0001: input,hidraw0: USB HID v1.00 Device [C-Media Electronics Inc. USB Audio Device] on usb-0000:00:1d.0-1.3/input3 |
| [ 3.105737] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD502HI 1118 PQ: 0 ANSI: 5 |
| [ 3.108026] usb 3-1.4: new high-speed USB device number 5 using ehci-pci |
| [ 3.116963] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) |
| [ 3.116987] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB) |
| [ 3.116992] sd 5:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB) |
| [ 3.116998] sd 5:0:0:0: [sdc] Write Protect is off |
| [ 3.116999] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 |
| [ 3.117010] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 3.118727] sd 0:0:0:0: [sda] Write Protect is off |
| [ 3.120601] sd 1:0:0:0: [sdb] Write Protect is off |
| [ 3.122321] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 3.124162] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 |
| [ 3.125610] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 3.127156] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 3.131664] sda: sda1 sda2 sda3 sda4 |
| [ 3.133320] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 3.134361] sdb: sdb1 sdb2 sdb3 sdb4 |
| [ 3.136145] sd 1:0:0:0: [sdb] Attached SCSI disk |
| [ 3.145293] sdc: sdc1 sdc2 |
| [ 3.146798] sd 5:0:0:0: [sdc] Attached SCSI disk |
| [ 3.220701] usb 3-1.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 |
| [ 3.223190] usb 3-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 |
| [ 3.225590] usb 3-1.4: Product: USB 2.0 Hub |
| [ 3.227945] hub 3-1.4:1.0: USB hub found |
| [ 3.230154] hub 3-1.4:1.0: 4 ports detected |
| [ 3.312029] usb 3-1.5: new full-speed USB device number 6 using ehci-pci |
| [ 3.421223] usb 3-1.5: New USB device found, idVendor=0cf3, idProduct=3005, bcdDevice= 0.01 |
| [ 3.423591] usb 3-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.488680] VFIO - User Level meta-driver version: 0.3 |
| [ 3.493771] vfio-pci 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=none |
| [ 3.520113] vfio_pci: add [10de:1401[ffff:ffff]] class 0x000000/00000000 |
| [ 3.540038] usb 3-1.4.1: new full-speed USB device number 7 using ehci-pci |
| [ 3.540080] vfio_pci: add [10de:0fba[ffff:ffff]] class 0x000000/00000000 |
| [ 3.632004] raid6: sse2x1 gen() 11732 MB/s |
| [ 3.700002] raid6: sse2x1 xor() 8407 MB/s |
| [ 3.768003] raid6: sse2x2 gen() 13993 MB/s |
| [ 3.836002] raid6: sse2x2 xor() 9366 MB/s |
| [ 3.904003] raid6: sse2x4 gen() 16658 MB/s |
| [ 3.972002] raid6: sse2x4 xor() 11061 MB/s |
| [ 3.973155] raid6: using algorithm sse2x4 gen() 16658 MB/s |
| [ 3.974288] raid6: .... xor() 11061 MB/s, rmw enabled |
| [ 3.975414] raid6: using ssse3x2 recovery algorithm |
| [ 3.976884] xor: automatically using best checksumming function avx |
| [ 3.978197] async_tx: api initialized (async) |
| [ 4.013556] Btrfs loaded, crc32c=crc32c-intel |
| [ 4.066653] usb 3-1.4.1: New USB device found, idVendor=258a, idProduct=1007, bcdDevice= 1.00 |
| [ 4.069320] usb 3-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 4.071961] usb 3-1.4.1: Product: Game Mouse |
| [ 4.074431] usb 3-1.4.1: Manufacturer: SINOWEALTH |
| [ 4.077306] input: SINOWEALTH Game Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.4/3-1.4.1/3-1.4.1:1.0/0003:258A:1007.0002/input/input3 |
| [ 4.078732] hid-generic 0003:258A:1007.0002: input,hidraw1: USB HID v1.11 Mouse [SINOWEALTH Game Mouse] on usb-0000:00:1d.0-1.4.1/input0 |
| [ 4.078881] BTRFS: device label debian devid 1 transid 60471 /dev/sda4 |
| [ 4.082852] BTRFS: device label data devid 1 transid 52793 /dev/sdc1 |
| [ 4.083350] input: SINOWEALTH Game Mouse Keyboard as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.4/3-1.4.1/3-1.4.1:1.1/0003:258A:1007.0003/input/input4 |
| [ 4.144354] hid-generic 0003:258A:1007.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [SINOWEALTH Game Mouse] on usb-0000:00:1d.0-1.4.1/input1 |
| [ 4.166055] PM: Image not found (code -22) |
| [ 4.198613] BTRFS info (device sda4): disk space caching is enabled |
| [ 4.201114] BTRFS info (device sda4): has skinny extents |
| [ 4.228036] usb 3-1.4.3: new low-speed USB device number 8 using ehci-pci |
| [ 4.238592] BTRFS info (device sda4): enabling ssd optimizations |
| [ 4.367533] usb 3-1.4.3: New USB device found, idVendor=0518, idProduct=0001, bcdDevice= 1.00 |
| [ 4.370117] usb 3-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 4.372597] usb 3-1.4.3: Product: USB-compliant keyboard |
| [ 4.375040] usb 3-1.4.3: Manufacturer: Plus More Enterprise LTD. |
| [ 4.380842] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.4/3-1.4.3/3-1.4.3:1.0/0003:0518:0001.0004/input/input6 |
| [ 4.423653] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) |
| [ 4.440228] hid-generic 0003:0518:0001.0004: input,hidraw3: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.0-1.4.3/input0 |
| [ 4.444541] systemd[1]: Detected architecture x86-64. |
| [ 4.446500] input: Plus More Enterprise LTD. USB-compliant keyboard Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.4/3-1.4.3/3-1.4.3:1.1/0003:0518:0001.0005/input/input7 |
| [ 4.451064] input: Plus More Enterprise LTD. USB-compliant keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.4/3-1.4.3/3-1.4.3:1.1/0003:0518:0001.0005/input/input8 |
| [ 4.461262] systemd[1]: Set hostname to <debianDesktop>. |
| [ 4.512094] input: Plus More Enterprise LTD. USB-compliant keyboard System Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.4/3-1.4.3/3-1.4.3:1.1/0003:0518:0001.0005/input/input9 |
| [ 4.514938] hid-generic 0003:0518:0001.0005: input,hidraw4: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.0-1.4.3/input1 |
| [ 4.553968] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 4.555376] systemd[1]: Reached target User and Group Name Lookups. |
| [ 4.558821] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 4.560239] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 4.563623] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 4.565092] systemd[1]: Listening on initctl Compatibility Named Pipe. |
| [ 4.568596] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 4.572391] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 4.575841] systemd[1]: Listening on Journal Audit Socket. |
| [ 4.579270] systemd[1]: Listening on Network Service Netlink Socket. |
| [ 4.632032] RPC: Registered named UNIX socket transport module. |
| [ 4.632033] RPC: Registered udp transport module. |
| [ 4.632033] RPC: Registered tcp transport module. |
| [ 4.632033] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 4.641129] lp: driver loaded but no devices found |
| [ 4.643835] ppdev: user-space parallel port driver |
| [ 4.648536] f71882fg: Found f71808a chip at 0x290, revision 33 |
| [ 4.648606] f71882fg f71882fg.656: Fan: 1 is in duty-cycle mode |
| [ 4.648612] f71882fg f71882fg.656: Auto pwm controlled by raw digital data, disabling pwm auto_point sysfs attributes for fan 1 |
| [ 4.648617] f71882fg f71882fg.656: Fan: 2 is in duty-cycle mode |
| [ 4.648632] f71882fg f71882fg.656: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). |
| [ 4.659873] BTRFS info (device sda4): use lzo compression, level 0 |
| [ 4.659875] BTRFS info (device sda4): disk space caching is enabled |
| [ 4.726589] systemd-journald[416]: Received request to flush runtime journal from PID 1 |
| [ 4.844749] EDAC ie31200: No ECC support |
| [ 4.868491] iTCO_vendor_support: vendor-support=0 |
| [ 4.888307] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 4.889654] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS |
| [ 4.891396] input: PC Speaker as /devices/platform/pcspkr/input/input10 |
| [ 4.892999] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 4.893176] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) |
| [ 4.894318] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| [ 4.894319] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| [ 4.894319] RAPL PMU: hw unit of domain package 2^-16 Joules |
| [ 4.894320] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| [ 4.898478] sd 1:0:0:0: Attached scsi generic sg1 type 0 |
| [ 4.903157] sd 5:0:0:0: Attached scsi generic sg2 type 0 |
| [ 4.906655] media: Linux media interface: v0.10 |
| [ 4.913773] videodev: Linux video capture interface: v2.00 |
| [ 4.923622] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line |
| [ 4.925022] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 4.926289] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) |
| [ 4.927672] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0 |
| [ 4.929253] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0 |
| [ 4.930705] snd_hda_codec_realtek hdaudioC0D2: inputs: |
| [ 4.932432] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19 |
| [ 4.933790] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18 |
| [ 4.935021] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a |
| [ 4.945669] uvcvideo: Found UVC 1.00 device Webcam C170 (046d:082b) |
| [ 4.952942] usbcore: registered new interface driver snd-usb-audio |
| [ 4.958390] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 |
| [ 4.959736] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 |
| [ 4.959769] intel_rapl: Found RAPL domain package |
| [ 4.962431] intel_rapl: Found RAPL domain core |
| [ 4.962432] intel_rapl: Found RAPL domain uncore |
| [ 4.962690] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 |
| [ 4.962727] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 |
| [ 4.962759] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 |
| [ 4.962793] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 |
| [ 4.962824] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 |
| [ 4.962856] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 |
| [ 4.962886] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 |
| [ 4.962918] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 |
| [ 4.966557] Bluetooth: Core ver 2.22 |
| [ 4.966573] NET: Registered protocol family 31 |
| [ 4.966573] Bluetooth: HCI device and connection manager initialized |
| [ 4.966576] Bluetooth: HCI socket layer initialized |
| [ 4.966578] Bluetooth: L2CAP socket layer initialized |
| [ 4.966583] Bluetooth: SCO socket layer initialized |
| [ 4.967332] uvcvideo 3-1.2:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 4.967334] uvcvideo 3-1.2:1.0: Entity type for entity Extension 6 was not initialized! |
| [ 4.967335] uvcvideo 3-1.2:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 4.967404] input: Webcam C170: Webcam C170 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input21 |
| [ 4.967487] usbcore: registered new interface driver uvcvideo |
| [ 4.967488] USB Video Class driver (1.1.1) |
| [ 5.005201] usbcore: registered new interface driver btusb |
| [ 5.131764] BTRFS info (device sdc1): use lzo compression, level 0 |
| [ 5.133067] BTRFS info (device sdc1): disk space caching is enabled |
| [ 5.133068] BTRFS info (device sdc1): has skinny extents |
| [ 5.157389] Adding 16778236k swap on /dev/sdc2. Priority:-2 extents:1 across:16778236k FS |
| [ 10.272923] audit: type=1400 audit(1546428958.038:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=707 comm="apparmor_parser" |
| [ 10.273027] audit: type=1400 audit(1546428958.038:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=706 comm="apparmor_parser" |
| [ 10.275605] audit: type=1400 audit(1546428958.038:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=704 comm="apparmor_parser" |
| [ 10.276911] audit: type=1400 audit(1546428958.038:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=704 comm="apparmor_parser" |
| [ 10.278214] audit: type=1400 audit(1546428958.038:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=704 comm="apparmor_parser" |
| [ 10.279550] audit: type=1400 audit(1546428958.038:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=705 comm="apparmor_parser" |
| [ 10.280770] audit: type=1400 audit(1546428958.038:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=703 comm="apparmor_parser" |
| [ 10.280772] audit: type=1400 audit(1546428958.038:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=710 comm="apparmor_parser" |
| [ 10.283424] audit: type=1400 audit(1546428958.042:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/libvirtd" pid=713 comm="apparmor_parser" |
| [ 10.283435] audit: type=1400 audit(1546428958.042:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/libvirtd//qemu_bridge_helper" pid=713 comm="apparmor_parser" |
| [ 10.326277] random: crng init done |
| [ 10.327635] random: 7 urandom warning(s) missed due to ratelimiting |
| [ 10.673163] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 10.673164] Bluetooth: BNEP filters: protocol multicast |
| [ 10.673167] Bluetooth: BNEP socket layer initialized |
| [ 10.943617] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 10.947791] sky2 0000:04:00.0 eth0: enabling interface |
| [ 10.949041] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 13.429707] sky2 0000:04:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both |
| [ 13.431376] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 13.970789] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. |
| [ 13.972572] Bridge firewalling registered |
| [ 14.025071] Initializing XFRM netlink socket |
| [ 14.060262] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready |
| [ 16.032210] usb 3-1.2: reset high-speed USB device number 3 using ehci-pci |
| [ 16.396374] Bluetooth: RFCOMM TTY layer initialized |
| [ 16.396380] Bluetooth: RFCOMM socket layer initialized |
| [ 16.396385] Bluetooth: RFCOMM ver 1.11 |
| [ 21.026217] fuse init (API version 7.27) |
| [ 22.654479] rfkill: input handler disabled |