| [ 0.000000] Linux version 5.2.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-22)) #1 SMP Debian 5.2.17-1 (2019-09-26) |
| [ 0.000000] Command line: BOOT_IMAGE=/@/boot/vmlinuz-5.2.0-3-amd64 root=UUID=2135263c-cb8c-4147-b784-ac5bba7d9353 ro rootflags=subvol=@ intel_iommu=on rootflags=subvol=@ |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fee1fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000007fee2000-0x00000000829fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047d5fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.8 present. |
| [ 0.000000] DMI: Sapphire Pure Platinum H61/Pure Platinum H61, BIOS 4.11-659-gef4fe3e37c 01/01/2020 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 3392.110 MHz processor |
| [ 0.001071] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.001072] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.001074] last_pfn = 0x47d600 max_arch_pfn = 0x400000000 |
| [ 0.001078] MTRR default type: write-back |
| [ 0.001079] MTRR fixed ranges enabled: |
| [ 0.001080] 00000-9FFFF write-back |
| [ 0.001080] A0000-BFFFF uncachable |
| [ 0.001081] C0000-FFFFF write-back |
| [ 0.001081] MTRR variable ranges enabled: |
| [ 0.001082] 0 base 080000000 mask FC0000000 uncachable |
| [ 0.001083] 1 base 0C0000000 mask FF0000000 uncachable |
| [ 0.001084] 2 base 0D0000000 mask FF0000000 write-combining |
| [ 0.001084] 3 base 0E0000000 mask FE0000000 uncachable |
| [ 0.001085] 4 disabled |
| [ 0.001085] 5 disabled |
| [ 0.001085] 6 disabled |
| [ 0.001086] 7 disabled |
| [ 0.001086] 8 disabled |
| [ 0.001086] 9 disabled |
| [ 0.001923] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.002236] last_pfn = 0x7fee2 max_arch_pfn = 0x400000000 |
| [ 0.010277] BRK [0x267c01000, 0x267c01fff] PGTABLE |
| [ 0.010278] BRK [0x267c02000, 0x267c02fff] PGTABLE |
| [ 0.010279] BRK [0x267c03000, 0x267c03fff] PGTABLE |
| [ 0.010306] BRK [0x267c04000, 0x267c04fff] PGTABLE |
| [ 0.010307] BRK [0x267c05000, 0x267c05fff] PGTABLE |
| [ 0.010390] BRK [0x267c06000, 0x267c06fff] PGTABLE |
| [ 0.010412] BRK [0x267c07000, 0x267c07fff] PGTABLE |
| [ 0.010565] RAMDISK: [mem 0x32c1f000-0x35606fff] |
| [ 0.010571] ACPI: Early table checksum verification disabled |
| [ 0.010619] ACPI: RSDP 0x00000000000F6750 000024 (v02 COREv4) |
| [ 0.010621] ACPI: XSDT 0x000000007FEE80E0 000054 (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.010625] ACPI: FACP 0x000000007FEEA8E0 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.010629] ACPI: DSDT 0x000000007FEE8280 00265A (v02 COREv4 COREBOOT 20141018 INTL 20190703) |
| [ 0.010631] ACPI: FACS 0x000000007FEE8240 000040 |
| [ 0.010634] ACPI: FACS 0x000000007FEE8240 000040 |
| [ 0.010635] ACPI: SSDT 0x000000007FEEA9E0 002AAF (v02 COREv4 COREBOOT 0000002A CORE 20190703) |
| [ 0.010638] ACPI: MCFG 0x000000007FEED490 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.010640] ACPI: APIC 0x000000007FEED4D0 00008C (v02 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.010642] ACPI: DMAR 0x000000007FEED560 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.010644] ACPI: HPET 0x000000007FEED630 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.010650] ACPI: Local APIC address 0xfee00000 |
| [ 0.010719] No NUMA configuration found |
| [ 0.010720] Faking a node at [mem 0x0000000000000000-0x000000047d5fffff] |
| [ 0.010723] NODE_DATA(0) allocated [mem 0x47d5ee000-0x47d5f2fff] |
| [ 0.010749] Zone ranges: |
| [ 0.010750] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.010751] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.010752] Normal [mem 0x0000000100000000-0x000000047d5fffff] |
| [ 0.010753] Device empty |
| [ 0.010753] Movable zone start for each node |
| [ 0.010754] Early memory node ranges |
| [ 0.010755] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.010756] node 0: [mem 0x0000000000100000-0x000000007fee1fff] |
| [ 0.010756] node 0: [mem 0x0000000100000000-0x000000047d5fffff] |
| [ 0.010764] Zeroed struct page in unavailable ranges: 384 pages |
| [ 0.010765] Initmem setup node 0 [mem 0x0000000000001000-0x000000047d5fffff] |
| [ 0.010767] On node 0 totalpages: 4183168 |
| [ 0.010767] DMA zone: 64 pages used for memmap |
| [ 0.010768] DMA zone: 21 pages reserved |
| [ 0.010768] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.010808] DMA32 zone: 8124 pages used for memmap |
| [ 0.010808] DMA32 zone: 519906 pages, LIFO batch:63 |
| [ 0.017545] Normal zone: 57176 pages used for memmap |
| [ 0.017547] Normal zone: 3659264 pages, LIFO batch:63 |
| [ 0.052121] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff] |
| [ 0.052253] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.052255] ACPI: Local APIC address 0xfee00000 |
| [ 0.052269] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.052271] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.052273] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.052274] ACPI: IRQ0 used by override. |
| [ 0.052275] ACPI: IRQ9 used by override. |
| [ 0.052276] Using ACPI (MADT) for SMP configuration information |
| [ 0.052277] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.052281] smpboot: Allowing 8 CPUs, 0 hotplug CPUs |
| [ 0.052289] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.052290] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.052291] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.052292] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.052293] PM: Registered nosave memory: [mem 0x7fee2000-0x829fffff] |
| [ 0.052293] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff] |
| [ 0.052294] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| [ 0.052295] PM: Registered nosave memory: [mem 0xf4000000-0xfed8ffff] |
| [ 0.052295] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] |
| [ 0.052296] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff] |
| [ 0.052297] [mem 0x82a00000-0xefffffff] available for PCI devices |
| [ 0.052298] Booting paravirtualized kernel on bare hardware |
| [ 0.052301] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| [ 0.121833] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 |
| [ 0.122009] percpu: Embedded 53 pages/cpu s176984 r8192 d31912 u262144 |
| [ 0.122014] pcpu-alloc: s176984 r8192 d31912 u262144 alloc=1*2097152 |
| [ 0.122014] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 |
| [ 0.122029] Built 1 zonelists, mobility grouping on. Total pages: 4117783 |
| [ 0.122030] Policy zone: Normal |
| [ 0.122031] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-5.2.0-3-amd64 root=UUID=2135263c-cb8c-4147-b784-ac5bba7d9353 ro rootflags=subvol=@ intel_iommu=on rootflags=subvol=@ |
| [ 0.122069] DMAR: IOMMU enabled |
| [ 0.125153] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.125158] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.161619] Memory: 16335028K/16732672K available (10243K kernel code, 1186K rwdata, 3520K rodata, 1640K init, 2168K bss, 397644K reserved, 0K cma-reserved) |
| [ 0.161715] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 |
| [ 0.161724] Kernel/User page tables isolation: enabled |
| [ 0.161736] ftrace: allocating 32795 entries in 129 pages |
| [ 0.170977] rcu: Hierarchical RCU implementation. |
| [ 0.170979] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. |
| [ 0.170980] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. |
| [ 0.170980] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 |
| [ 0.173545] NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16 |
| [ 0.173746] random: crng done (trusting CPU's manufacturer) |
| [ 0.174061] Console: colour dummy device 80x25 |
| [ 0.174149] printk: console [tty0] enabled |
| [ 0.174162] ACPI: Core revision 20190509 |
| [ 0.174272] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.174283] hpet clockevent registered |
| [ 0.174287] APIC: Switch to symmetric I/O mode setup |
| [ 0.174289] DMAR: Host address width 36 |
| [ 0.174290] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| [ 0.174295] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| [ 0.174296] DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff |
| [ 0.174298] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| [ 0.174301] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| [ 0.174304] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 |
| [ 0.174305] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| [ 0.174307] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| [ 0.174684] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| [ 0.174686] x2apic enabled |
| [ 0.174692] Switched APIC routing to cluster x2apic. |
| [ 0.175119] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.194288] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30e53163063, max_idle_ns: 440795351881 ns |
| [ 0.194293] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.22 BogoMIPS (lpj=13568440) |
| [ 0.194296] pid_max: default: 32768 minimum: 301 |
| [ 0.194317] LSM: Security Framework initializing |
| [ 0.194322] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.194339] AppArmor: AppArmor initialized |
| [ 0.194341] TOMOYO Linux initialized |
| [ 0.196319] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) |
| [ 0.197354] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.197395] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.197428] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.197625] mce: CPU0: Thermal monitoring enabled (TM1) |
| [ 0.197636] process: using mwait in idle threads |
| [ 0.197639] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| [ 0.197640] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.197642] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization |
| [ 0.197644] Spectre V2 : Mitigation: Full generic retpoline |
| [ 0.197645] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.197647] Spectre V2 : Enabling Restricted Speculation for firmware calls |
| [ 0.197650] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier |
| [ 0.197652] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl |
| [ 0.197654] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp |
| [ 0.197658] MDS: Mitigation: Clear CPU buffers |
| [ 0.197785] Freeing SMP alternatives memory: 24K |
| [ 0.199105] TSC deadline timer enabled |
| [ 0.199108] smpboot: CPU0: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz (family: 0x6, model: 0x3a, stepping: 0x9) |
| [ 0.199199] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| [ 0.199208] ... version: 3 |
| [ 0.199209] ... bit width: 48 |
| [ 0.199210] ... generic registers: 4 |
| [ 0.199211] ... value mask: 0000ffffffffffff |
| [ 0.199212] ... max period: 00007fffffffffff |
| [ 0.199213] ... fixed-purpose events: 3 |
| [ 0.199215] ... event mask: 000000070000000f |
| [ 0.199243] rcu: Hierarchical SRCU implementation. |
| [ 0.199763] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.199817] smp: Bringing up secondary CPUs ... |
| [ 0.199881] x86: Booting SMP configuration: |
| [ 0.199882] .... node #0, CPUs: #1 |
| [ 0.202319] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. |
| [ 0.202407] #2 #3 #4 #5 #6 #7 |
| [ 0.214337] smp: Brought up 1 node, 8 CPUs |
| [ 0.214337] smpboot: Max logical packages: 1 |
| [ 0.214337] smpboot: Total of 8 processors activated (54273.76 BogoMIPS) |
| [ 0.218643] devtmpfs: initialized |
| [ 0.218643] x86/mm: Memory block size: 128MB |
| [ 0.219169] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.219169] futex hash table entries: 2048 (order: 5, 131072 bytes) |
| [ 0.219169] pinctrl core: initialized pinctrl subsystem |
| [ 0.219169] NET: Registered protocol family 16 |
| [ 0.219169] audit: initializing netlink subsys (disabled) |
| [ 0.219169] audit: type=2000 audit(1577916887.044:1): state=initialized audit_enabled=0 res=1 |
| [ 0.219169] cpuidle: using governor ladder |
| [ 0.219169] cpuidle: using governor menu |
| [ 0.219169] ACPI: bus type PCI registered |
| [ 0.219169] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.219169] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.219169] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| [ 0.219169] PCI: Using configuration type 1 for base access |
| [ 0.219169] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| [ 0.219169] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.342499] alg: No test for lzo-rle (lzo-rle-generic) |
| [ 0.342499] alg: No test for lzo-rle (lzo-rle-scomp) |
| [ 0.346350] ACPI: Added _OSI(Module Device) |
| [ 0.346352] ACPI: Added _OSI(Processor Device) |
| [ 0.346353] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.346355] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.346356] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.346358] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.346359] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| [ 0.347802] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.348412] ACPI: Interpreter enabled |
| [ 0.348425] ACPI: (supports S0 S3 S4 S5) |
| [ 0.348426] ACPI: Using IOAPIC for interrupt routing |
| [ 0.348442] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.350469] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.350474] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] |
| [ 0.350505] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] |
| [ 0.350512] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.350545] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6dff]) |
| [ 0.350662] PCI host bridge to bus 0000:00 |
| [ 0.350665] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.350667] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.350668] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.350670] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.350672] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.350674] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] |
| [ 0.350676] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] |
| [ 0.350678] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.350680] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.350681] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.350683] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.350685] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.350687] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.350689] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.350691] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.350693] pci_bus 0000:00: root bus resource [mem 0x82a00001-0xefffffff window] |
| [ 0.350695] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.350697] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.350703] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000 |
| [ 0.350769] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 |
| [ 0.350799] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold |
| [ 0.350854] pci 0000:00:02.0: [8086:0162] type 00 class 0x030000 |
| [ 0.350864] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit] |
| [ 0.350870] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| [ 0.350874] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f] |
| [ 0.350977] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 |
| [ 0.351075] pci 0000:00:16.0: reg 0x10: [mem 0xe0608000-0xe060800f 64bit] |
| [ 0.351398] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold |
| [ 0.351508] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 |
| [ 0.351530] pci 0000:00:1a.0: reg 0x10: [mem 0xe0605000-0xe06053ff] |
| [ 0.351609] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.351670] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 |
| [ 0.351692] pci 0000:00:1b.0: reg 0x10: [mem 0xe0600000-0xe0603fff 64bit] |
| [ 0.351763] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.351830] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 |
| [ 0.351973] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.352002] pci 0000:00:1c.0: Enabling MPC IRBNCE |
| [ 0.352005] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled |
| [ 0.352070] pci 0000:00:1c.1: [8086:1c18] type 01 class 0x060400 |
| [ 0.352158] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.352177] pci 0000:00:1c.1: Enabling MPC IRBNCE |
| [ 0.352180] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled |
| [ 0.352236] pci 0000:00:1c.4: [8086:1c1a] type 01 class 0x060400 |
| [ 0.352325] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold |
| [ 0.352344] pci 0000:00:1c.4: Enabling MPC IRBNCE |
| [ 0.352347] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled |
| [ 0.352404] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 |
| [ 0.352426] pci 0000:00:1d.0: reg 0x10: [mem 0xe0606000-0xe06063ff] |
| [ 0.352506] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.352566] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100 |
| [ 0.352716] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 |
| [ 0.352735] pci 0000:00:1f.2: reg 0x10: [io 0x2060-0x2067] |
| [ 0.352744] pci 0000:00:1f.2: reg 0x14: [io 0x2070-0x2073] |
| [ 0.352752] pci 0000:00:1f.2: reg 0x18: [io 0x2068-0x206f] |
| [ 0.352761] pci 0000:00:1f.2: reg 0x1c: [io 0x2074-0x2077] |
| [ 0.352769] pci 0000:00:1f.2: reg 0x20: [io 0x2040-0x205f] |
| [ 0.352777] pci 0000:00:1f.2: reg 0x24: [mem 0xe0604000-0xe06047ff] |
| [ 0.352820] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.352875] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 |
| [ 0.352894] pci 0000:00:1f.3: reg 0x10: [mem 0xe0607000-0xe06070ff 64bit] |
| [ 0.352914] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.352994] pci 0000:00:01.0: PCI bridge to [bus 01] |
| [ 0.353050] pci 0000:00:1c.0: PCI bridge to [bus 02] |
| [ 0.353126] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330 |
| [ 0.353177] pci 0000:03:00.0: reg 0x10: [mem 0xe0400000-0xe0407fff 64bit] |
| [ 0.353386] pci 0000:03:00.0: PME# supported from D3hot D3cold |
| [ 0.353498] pci 0000:00:1c.1: PCI bridge to [bus 03] |
| [ 0.353504] pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff] |
| [ 0.353697] pci 0000:04:00.0: [11ab:4380] type 00 class 0x020000 |
| [ 0.353976] pci 0000:04:00.0: reg 0x10: [mem 0xe0520000-0xe0523fff 64bit] |
| [ 0.354079] pci 0000:04:00.0: reg 0x18: [io 0x1000-0x10ff] |
| [ 0.354444] pci 0000:04:00.0: reg 0x30: [mem 0xe0500000-0xe051ffff pref] |
| [ 0.355037] pci 0000:04:00.0: supports D1 D2 |
| [ 0.355038] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.355687] pci 0000:00:1c.4: PCI bridge to [bus 04] |
| [ 0.355691] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff] |
| [ 0.355695] pci 0000:00:1c.4: bridge window [mem 0xe0500000-0xe05fffff] |
| [ 0.355814] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.355847] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.355878] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.355908] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.355937] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.355967] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.355997] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.356027] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.356180] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.356180] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.356180] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.356180] vgaarb: loaded |
| [ 0.356180] EDAC MC: Ver: 3.0.0 |
| [ 0.356180] PCI: Using ACPI for IRQ routing |
| [ 0.356180] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.356180] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.356180] e820: reserve RAM buffer [mem 0x7fee2000-0x7fffffff] |
| [ 0.356180] e820: reserve RAM buffer [mem 0x47d600000-0x47fffffff] |
| [ 0.358370] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.358374] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.360396] clocksource: Switched to clocksource tsc-early |
| [ 0.366473] VFS: Disk quotas dquot_6.6.0 |
| [ 0.366487] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.366576] AppArmor: AppArmor Filesystem Enabled |
| [ 0.366591] pnp: PnP ACPI init |
| [ 0.366728] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.366730] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.366732] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.366734] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.366736] system 00:00: [mem 0xf0000000-0x12fffffff] could not be reserved |
| [ 0.366738] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.366740] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.366742] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.366744] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved |
| [ 0.366745] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved |
| [ 0.366750] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.366897] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.366901] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.366927] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.366929] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.366932] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.366945] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.366958] pnp: PnP ACPI: found 4 devices |
| [ 0.372342] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.372352] pci 0000:00:01.0: PCI bridge to [bus 01] |
| [ 0.372358] pci 0000:00:1c.0: PCI bridge to [bus 02] |
| [ 0.372375] pci 0000:00:1c.1: PCI bridge to [bus 03] |
| [ 0.372381] pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff] |
| [ 0.372388] pci 0000:00:1c.4: PCI bridge to [bus 04] |
| [ 0.372392] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff] |
| [ 0.372397] pci 0000:00:1c.4: bridge window [mem 0xe0500000-0xe05fffff] |
| [ 0.372406] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.372408] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.372409] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.372411] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.372413] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window] |
| [ 0.372414] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window] |
| [ 0.372416] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window] |
| [ 0.372418] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window] |
| [ 0.372420] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window] |
| [ 0.372421] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window] |
| [ 0.372423] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window] |
| [ 0.372425] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window] |
| [ 0.372426] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window] |
| [ 0.372428] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window] |
| [ 0.372430] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window] |
| [ 0.372431] pci_bus 0000:00: resource 19 [mem 0x82a00001-0xefffffff window] |
| [ 0.372433] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window] |
| [ 0.372435] pci_bus 0000:03: resource 1 [mem 0xe0400000-0xe04fffff] |
| [ 0.372437] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] |
| [ 0.372439] pci_bus 0000:04: resource 1 [mem 0xe0500000-0xe05fffff] |
| [ 0.372487] NET: Registered protocol family 2 |
| [ 0.372593] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes) |
| [ 0.372632] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) |
| [ 0.372781] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 0.372889] TCP: Hash tables configured (established 131072 bind 65536) |
| [ 0.372918] UDP hash table entries: 8192 (order: 6, 262144 bytes) |
| [ 0.372954] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) |
| [ 0.373013] NET: Registered protocol family 1 |
| [ 0.373018] NET: Registered protocol family 44 |
| [ 0.373026] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.373674] PCI: CLS 64 bytes, default 64 |
| [ 0.373705] Trying to unpack rootfs image as initramfs... |
| [ 0.853324] Freeing initrd memory: 42912K |
| [ 0.853362] DMAR: No ATSR found |
| [ 0.853391] DMAR: dmar0: Using Queued invalidation |
| [ 0.853397] DMAR: dmar1: Using Queued invalidation |
| [ 0.853406] DMAR: Setting RMRR: |
| [ 0.853452] pci 0000:00:02.0: DMAR: Setting identity map [0x80800000 - 0x829fffff] |
| [ 0.853592] DMAR: Prepare 0-16MiB unity mapping for LPC |
| [ 0.853645] pci 0000:00:1f.0: DMAR: Setting identity map [0x0 - 0xffffff] |
| [ 0.853716] DMAR: Intel(R) Virtualization Technology for Directed I/O |
| [ 0.853760] pci 0000:00:00.0: Adding to iommu group 0 |
| [ 0.853772] pci 0000:00:01.0: Adding to iommu group 1 |
| [ 0.853779] pci 0000:00:02.0: Adding to iommu group 2 |
| [ 0.853788] pci 0000:00:16.0: Adding to iommu group 3 |
| [ 0.853794] pci 0000:00:1a.0: Adding to iommu group 4 |
| [ 0.853801] pci 0000:00:1b.0: Adding to iommu group 5 |
| [ 0.853808] pci 0000:00:1c.0: Adding to iommu group 6 |
| [ 0.853815] pci 0000:00:1c.1: Adding to iommu group 7 |
| [ 0.853822] pci 0000:00:1c.4: Adding to iommu group 8 |
| [ 0.853829] pci 0000:00:1d.0: Adding to iommu group 9 |
| [ 0.853841] pci 0000:00:1f.0: Adding to iommu group 10 |
| [ 0.853847] pci 0000:00:1f.2: Adding to iommu group 10 |
| [ 0.853854] pci 0000:00:1f.3: Adding to iommu group 10 |
| [ 0.853861] pci 0000:03:00.0: Adding to iommu group 11 |
| [ 0.853868] pci 0000:04:00.0: Adding to iommu group 12 |
| [ 0.855649] Initialise system trusted keyrings |
| [ 0.855655] Key type blacklist registered |
| [ 0.855689] workingset: timestamp_bits=40 max_order=22 bucket_order=0 |
| [ 0.856584] zbud: loaded |
| [ 0.856829] Platform Keyring initialized |
| [ 0.856832] Key type asymmetric registered |
| [ 0.856833] Asymmetric key parser 'x509' registered |
| [ 0.856839] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) |
| [ 0.856868] io scheduler mq-deadline registered |
| [ 0.857046] pcieport 0000:00:01.0: PME: Signaling with IRQ 26 |
| [ 0.857185] pcieport 0000:00:1c.0: PME: Signaling with IRQ 27 |
| [ 0.857318] pcieport 0000:00:1c.1: PME: Signaling with IRQ 28 |
| [ 0.857454] pcieport 0000:00:1c.4: PME: Signaling with IRQ 29 |
| [ 0.857510] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 0.857519] intel_idle: MWAIT substates: 0x1120 |
| [ 0.857520] intel_idle: v0.4.1 model 0x3A |
| [ 0.857742] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 0.858645] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 0.859028] Linux agpgart interface v0.103 |
| [ 0.859060] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 0.859062] AMD-Vi: AMD IOMMUv2 functionality not available on this system |
| [ 0.859373] i8042: PNP: No PS/2 controller found. |
| [ 0.859374] i8042: Probing ports directly. |
| [ 1.377264] DMAR: DRHD: handling fault status reg 3 |
| [ 1.377266] DMAR: [DMA Read] Request device [00:02.0] fault addr 7087cac000 [fault reason 06] PTE Read access is not set |
| [ 1.895149] DMAR: DRHD: handling fault status reg 3 |
| [ 1.895151] DMAR: [DMA Read] Request device [00:02.0] fault addr 7087cac000 [fault reason 06] PTE Read access is not set |
| [ 1.896024] i8042: No controller found |
| [ 1.896310] mousedev: PS/2 mouse device common for all mice |
| [ 1.896344] rtc_cmos 00:03: RTC can wake from S4 |
| [ 1.896558] rtc_cmos 00:03: registered as rtc0 |
| [ 1.896575] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 1.896583] intel_pstate: Intel P-state driver initializing |
| [ 1.897030] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 1.897421] NET: Registered protocol family 10 |
| [ 1.901183] DMAR: DRHD: handling fault status reg 3 |
| [ 1.901191] DMAR: [DMA Read] Request device [00:02.0] fault addr 7087cac000 [fault reason 06] PTE Read access is not set |
| [ 1.901673] DMAR: DRHD: handling fault status reg 3 |
| [ 1.912724] Segment Routing with IPv6 |
| [ 1.912770] mip6: Mobile IPv6 |
| [ 1.912775] NET: Registered protocol family 17 |
| [ 1.912916] mpls_gso: MPLS GSO support |
| [ 1.913600] mce: Using 9 MCE banks |
| [ 1.913664] microcode: sig=0x306a9, pf=0x2, revision=0x21 |
| [ 1.913761] microcode: Microcode Update Driver: v2.2. |
| [ 1.913773] sched_clock: Marking stable (1912996552, 568052)->(1923938166, -10373562) |
| [ 1.914096] registered taskstats version 1 |
| [ 1.914100] Loading compiled-in X.509 certificates |
| [ 1.947173] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' |
| [ 1.947194] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def' |
| [ 1.947216] zswap: loaded using pool lzo/zbud |
| [ 1.947334] AppArmor: AppArmor sha1 policy hashing enabled |
| [ 1.947560] rtc_cmos 00:03: setting system clock to 2020-01-01T22:14:49 UTC (1577916889) |
| [ 1.948417] Freeing unused kernel image memory: 1640K |
| [ 1.978326] Write protecting the kernel read-only data: 16384k |
| [ 1.978976] Freeing unused kernel image memory: 2036K |
| [ 1.979257] Freeing unused kernel image memory: 576K |
| [ 1.991133] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.991135] x86/mm: Checking user space page tables |
| [ 1.996233] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.996235] Run /init as init process |
| [ 2.100492] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 |
| [ 2.100516] ACPI: Power Button [PWRF] |
| [ 2.101609] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 2.101748] ACPI Error: Divide by zero (20190509/utmath-478) |
| [ 2.101754] ACPI Error: Aborting method \_SB.PCI0.GFX0.LEGA.DRCL due to previous error (AE_AML_DIVIDE_BY_ZERO) (20190509/psparse-531) |
| [ 2.101763] ACPI Error: Aborting method \_SB.PCI0.GFX0.LEGA.XBQC due to previous error (AE_AML_DIVIDE_BY_ZERO) (20190509/psparse-531) |
| [ 2.101769] ACPI Error: Aborting method \_SB.PCI0.GFX0.XBQC due to previous error (AE_AML_DIVIDE_BY_ZERO) (20190509/psparse-531) |
| [ 2.101773] ACPI Error: Aborting method \_SB.PCI0.GFX0.LCD0._BQC due to previous error (AE_AML_DIVIDE_BY_ZERO) (20190509/psparse-531) |
| [ 2.101777] ACPI Warning: Evaluating _BQC failed (20190509/video-609) |
| [ 2.101959] acpi device:0d: registered as cooling_device8 |
| [ 2.102024] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input1 |
| [ 2.106836] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 2.107172] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20190509/utaddress-213) |
| [ 2.107183] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.107188] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190509/utaddress-213) |
| [ 2.107194] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.107197] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190509/utaddress-213) |
| [ 2.107203] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.107206] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190509/utaddress-213) |
| [ 2.107212] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.107214] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 2.110461] cryptd: max_cpu_qlen set to 1000 |
| [ 2.118038] SCSI subsystem initialized |
| [ 2.119824] ACPI: bus type USB registered |
| [ 2.119848] usbcore: registered new interface driver usbfs |
| [ 2.119858] usbcore: registered new interface driver hub |
| [ 2.125134] sky2: driver version 1.30 |
| [ 2.125665] sky2 0000:04:00.0: Yukon-2 UL 2 chip revision 0 |
| [ 2.126167] usbcore: registered new device driver usb |
| [ 2.129882] AVX version of gcm_enc/dec engaged. |
| [ 2.129885] AES CTR mode by8 optimization enabled |
| [ 2.131103] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 2.131818] ehci-pci: EHCI PCI platform driver |
| [ 2.131944] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 2.131952] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| [ 2.131966] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 2.132582] libata version 3.00 loaded. |
| [ 2.135757] sky2 0000:04:00.0 eth0: addr dc:9c:52:07:d2:6b |
| [ 2.135932] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 2.135950] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe0605000 |
| [ 2.137672] ahci 0000:00:1f.2: version 3.0 |
| [ 2.137799] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 2.150496] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode |
| [ 2.150501] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 2.150987] scsi host0: ahci |
| [ 2.151139] scsi host1: ahci |
| [ 2.151320] scsi host2: ahci |
| [ 2.151431] scsi host3: ahci |
| [ 2.151501] scsi host4: ahci |
| [ 2.151573] scsi host5: ahci |
| [ 2.151615] ata1: SATA max UDMA/133 abar m2048@0xe0604000 port 0xe0604100 irq 31 |
| [ 2.151619] ata2: SATA max UDMA/133 abar m2048@0xe0604000 port 0xe0604180 irq 31 |
| [ 2.151620] ata3: DUMMY |
| [ 2.151621] ata4: DUMMY |
| [ 2.151624] ata5: SATA max UDMA/133 abar m2048@0xe0604000 port 0xe0604300 irq 31 |
| [ 2.151627] ata6: SATA max UDMA/133 abar m2048@0xe0604000 port 0xe0604380 irq 31 |
| [ 2.154302] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 2.154354] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 |
| [ 2.154356] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.154358] usb usb1: Product: EHCI Host Controller |
| [ 2.154360] usb usb1: Manufacturer: Linux 5.2.0-3-amd64 ehci_hcd |
| [ 2.154361] usb usb1: SerialNumber: 0000:00:1a.0 |
| [ 2.154445] hub 1-0:1.0: USB hub found |
| [ 2.154454] hub 1-0:1.0: 3 ports detected |
| [ 2.154546] xhci_hcd 0000:03:00.0: xHCI Host Controller |
| [ 2.154555] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2 |
| [ 2.164268] xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000 |
| [ 2.164594] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 |
| [ 2.164598] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.164601] usb usb2: Product: xHCI Host Controller |
| [ 2.164603] usb usb2: Manufacturer: Linux 5.2.0-3-amd64 xhci-hcd |
| [ 2.164605] usb usb2: SerialNumber: 0000:03:00.0 |
| [ 2.164722] hub 2-0:1.0: USB hub found |
| [ 2.164734] hub 2-0:1.0: 2 ports detected |
| [ 2.164835] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 2.164842] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 |
| [ 2.164848] xhci_hcd 0000:03:00.0: xHCI Host Controller |
| [ 2.164851] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 |
| [ 2.164854] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed |
| [ 2.164855] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 2.164876] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. |
| [ 2.164889] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02 |
| [ 2.164891] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.164893] usb usb4: Product: xHCI Host Controller |
| [ 2.164894] usb usb4: Manufacturer: Linux 5.2.0-3-amd64 xhci-hcd |
| [ 2.164896] usb usb4: SerialNumber: 0000:03:00.0 |
| [ 2.164959] hub 4-0:1.0: USB hub found |
| [ 2.164970] hub 4-0:1.0: 2 ports detected |
| [ 2.168797] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 2.168809] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe0606000 |
| [ 2.182301] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 2.182336] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 |
| [ 2.182338] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.182340] usb usb3: Product: EHCI Host Controller |
| [ 2.182341] usb usb3: Manufacturer: Linux 5.2.0-3-amd64 ehci_hcd |
| [ 2.182343] usb usb3: SerialNumber: 0000:00:1d.0 |
| [ 2.182424] hub 3-0:1.0: USB hub found |
| [ 2.182429] hub 3-0:1.0: 3 ports detected |
| [ 2.213368] [drm] VT-d active for gfx access |
| [ 2.213374] i915 0000:00:02.0: vgaarb: deactivate vga console |
| [ 2.213385] [drm] DMAR active, disabling use of stolen memory |
| [ 2.213422] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 2.213424] [drm] Driver supports precise vblank timestamp query. |
| [ 2.213428] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window] |
| [ 2.213434] caller pci_map_rom+0x6a/0x17d mapping multiple BARs |
| [ 2.213436] i915 0000:00:02.0: Invalid PCI ROM data signature: expecting 0x52494350, got 0xe937aa55 |
| [ 2.213438] [drm] Failed to find VBIOS tables (VBT) |
| [ 2.213589] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 2.221297] [drm] Initialized i915 1.6.0 20190417 for 0000:00:02.0 on minor 0 |
| [ 2.234316] tsc: Refined TSC clocksource calibration: 3392.297 MHz |
| [ 2.234328] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e5e240547, max_idle_ns: 440795346476 ns |
| [ 2.234373] clocksource: Switched to clocksource tsc |
| [ 2.255759] fbcon: i915drmfb (fb0) is primary device |
| [ 2.338919] [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* uncleared fifo underrun on pipe A |
| [ 2.338977] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun |
| [ 2.339044] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A |
| [ 2.339092] [drm:cpt_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun |
| [ 2.340751] ata1: SATA link down (SStatus 0 SControl 300) |
| [ 2.354921] Console: switching to colour frame buffer device 240x67 |
| [ 2.379982] i915 0000:00:02.0: fb0: i915drmfb frame buffer device |
| [ 2.470323] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| [ 2.470407] usb 3-1: new high-speed USB device number 2 using ehci-pci |
| [ 2.626670] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 2.626732] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.627061] hub 1-1:1.0: USB hub found |
| [ 2.627115] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 2.627172] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.627245] hub 1-1:1.0: 4 ports detected |
| [ 2.627628] hub 3-1:1.0: USB hub found |
| [ 2.627776] hub 3-1:1.0: 6 ports detected |
| [ 2.657006] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 2.657980] ata2.00: supports DRM functions and may not be fully accessible |
| [ 2.658074] ata2.00: ATA-10: CT1000MX500SSD1, M3CR023, max UDMA/133 |
| [ 2.658122] ata2.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA |
| [ 2.659144] ata2.00: supports DRM functions and may not be fully accessible |
| [ 2.660003] ata2.00: configured for UDMA/133 |
| [ 2.660346] scsi 1:0:0:0: Direct-Access ATA CT1000MX500SSD1 023 PQ: 0 ANSI: 5 |
| [ 2.914339] usb 1-1.4: new full-speed USB device number 3 using ehci-pci |
| [ 2.914414] usb 3-1.3: new high-speed USB device number 3 using ehci-pci |
| [ 2.973103] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 2.987737] ata5.00: ATA-8: KINGSTON SH103S3120G, 526ABBF0, max UDMA/133 |
| [ 2.987795] ata5.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA |
| [ 2.997451] ata5.00: configured for UDMA/133 |
| [ 2.997776] scsi 4:0:0:0: Direct-Access ATA KINGSTON SH103S3 BBF0 PQ: 0 ANSI: 5 |
| [ 3.023073] usb 3-1.3: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 |
| [ 3.023136] usb 3-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 |
| [ 3.023188] usb 3-1.3: Product: USB 2.0 Hub |
| [ 3.023566] hub 3-1.3:1.0: USB hub found |
| [ 3.023773] hub 3-1.3:1.0: 4 ports detected |
| [ 3.023992] usb 1-1.4: New USB device found, idVendor=0d8c, idProduct=0014, bcdDevice= 1.00 |
| [ 3.024051] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 3.024101] usb 1-1.4: Product: USB Audio Device |
| [ 3.024136] usb 1-1.4: Manufacturer: C-Media Electronics Inc. |
| [ 3.033778] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 3.038759] usbcore: registered new interface driver usbhid |
| [ 3.039989] usbhid: USB HID core driver |
| [ 3.043874] input: C-Media Electronics Inc. USB Audio Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.3/0003:0D8C:0014.0001/input/input2 |
| [ 3.102341] usb 3-1.4: new high-speed USB device number 4 using ehci-pci |
| [ 3.102518] hid-generic 0003:0D8C:0014.0001: input,hidraw0: USB HID v1.00 Device [C-Media Electronics Inc. USB Audio Device] on usb-0000:00:1a.0-1.4/input3 |
| [ 3.288082] usb 3-1.4: New USB device found, idVendor=046d, idProduct=082b, bcdDevice=28.25 |
| [ 3.290773] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 3.293448] usb 3-1.4: Product: Webcam C170 |
| [ 3.296106] usb 3-1.4: Manufacturer: |
| [ 3.312891] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 3.329933] ata6.00: ATA-8: KINGSTON SH103S3120G, 526ABBF0, max UDMA/133 |
| [ 3.332632] ata6.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA |
| [ 3.349828] ata6.00: configured for UDMA/133 |
| [ 3.352765] scsi 5:0:0:0: Direct-Access ATA KINGSTON SH103S3 BBF0 PQ: 0 ANSI: 5 |
| [ 3.364565] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) |
| [ 3.364607] sd 4:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB) |
| [ 3.364677] sd 5:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/112 GiB) |
| [ 3.364695] sd 5:0:0:0: [sdc] Write Protect is off |
| [ 3.364696] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 |
| [ 3.364717] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 3.367136] sd 1:0:0:0: [sda] 4096-byte physical blocks |
| [ 3.367171] sdc: sdc1 |
| [ 3.367179] sd 1:0:0:0: [sda] Write Protect is off |
| [ 3.367180] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 3.367192] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 3.368791] sd 4:0:0:0: [sdb] Write Protect is off |
| [ 3.370714] sd 5:0:0:0: [sdc] Attached SCSI disk |
| [ 3.371984] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 |
| [ 3.381355] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 3.383801] sda: sda1 sda2 sda3 sda4 sda5 |
| [ 3.384442] sdb: sdb1 |
| [ 3.386623] sd 1:0:0:0: [sda] supports TCG Opal |
| [ 3.386840] sd 4:0:0:0: [sdb] Attached SCSI disk |
| [ 3.387914] sd 1:0:0:0: [sda] Attached SCSI disk |
| [ 3.421169] md127: detected capacity change from 0 to 239928868864 |
| [ 3.423422] md127: p1 p2 p3 p4 |
| [ 3.430320] usb 3-1.3.1: new full-speed USB device number 5 using ehci-pci |
| [ 3.476462] VFIO - User Level meta-driver version: 0.3 |
| [ 3.487350] vfio_pci: add [10de:1401[ffffffff:ffffffff]] class 0x000000/00000000 |
| [ 3.489123] vfio_pci: add [10de:0fba[ffffffff:ffffffff]] class 0x000000/00000000 |
| [ 3.590298] raid6: sse2x4 gen() 16000 MB/s |
| [ 3.658298] raid6: sse2x4 xor() 11293 MB/s |
| [ 3.661277] usb 3-1.3.1: New USB device found, idVendor=258a, idProduct=1007, bcdDevice= 1.00 |
| [ 3.662534] usb 3-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 3.663758] usb 3-1.3.1: Product: Game Mouse |
| [ 3.664984] usb 3-1.3.1: Manufacturer: SINOWEALTH |
| [ 3.668044] input: SINOWEALTH Game Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.0/0003:258A:1007.0002/input/input3 |
| [ 3.669374] hid-generic 0003:258A:1007.0002: input,hidraw1: USB HID v1.11 Mouse [SINOWEALTH Game Mouse] on usb-0000:00:1d.0-1.3.1/input0 |
| [ 3.673748] input: SINOWEALTH Game Mouse Keyboard as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.1/0003:258A:1007.0003/input/input4 |
| [ 3.726297] raid6: sse2x2 gen() 14034 MB/s |
| [ 3.734437] hid-generic 0003:258A:1007.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [SINOWEALTH Game Mouse] on usb-0000:00:1d.0-1.3.1/input1 |
| [ 3.738301] usb 3-1.5: new full-speed USB device number 6 using ehci-pci |
| [ 3.794301] raid6: sse2x2 xor() 9438 MB/s |
| [ 3.847026] usb 3-1.5: New USB device found, idVendor=0cf3, idProduct=3000, bcdDevice= 2.00 |
| [ 3.848383] usb 3-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.862302] raid6: sse2x1 gen() 11818 MB/s |
| [ 3.930300] raid6: sse2x1 xor() 8366 MB/s |
| [ 3.931639] raid6: using algorithm sse2x4 gen() 16000 MB/s |
| [ 3.932965] raid6: .... xor() 11293 MB/s, rmw enabled |
| [ 3.934296] raid6: using ssse3x2 recovery algorithm |
| [ 3.936536] xor: automatically using best checksumming function avx |
| [ 3.939153] async_tx: api initialized (async) |
| [ 4.021432] Btrfs loaded, crc32c=crc32c-intel |
| [ 4.046332] usb 3-1.3.3: new low-speed USB device number 7 using ehci-pci |
| [ 4.084447] BTRFS: device label debian devid 1 transid 94966 /dev/sda4 |
| [ 4.119064] PM: Image not found (code -22) |
| [ 4.151755] BTRFS info (device sda4): disk space caching is enabled |
| [ 4.151757] BTRFS info (device sda4): has skinny extents |
| [ 4.266665] BTRFS info (device sda4): enabling ssd optimizations |
| [ 4.282650] usb 3-1.3.3: New USB device found, idVendor=0518, idProduct=0001, bcdDevice= 1.00 |
| [ 4.282652] usb 3-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 4.282654] usb 3-1.3.3: Product: USB-compliant keyboard |
| [ 4.282655] usb 3-1.3.3: Manufacturer: Plus More Enterprise LTD. |
| [ 4.287400] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3.3/3-1.3.3:1.0/0003:0518:0001.0004/input/input6 |
| [ 4.329573] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. |
| [ 4.346495] hid-generic 0003:0518:0001.0004: input,hidraw3: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.0-1.3.3/input0 |
| [ 4.352234] input: Plus More Enterprise LTD. USB-compliant keyboard Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3.3/3-1.3.3:1.1/0003:0518:0001.0005/input/input7 |
| [ 4.354740] input: Plus More Enterprise LTD. USB-compliant keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3.3/3-1.3.3:1.1/0003:0518:0001.0005/input/input8 |
| [ 4.414371] input: Plus More Enterprise LTD. USB-compliant keyboard System Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3.3/3-1.3.3:1.1/0003:0518:0001.0005/input/input9 |
| [ 4.417563] hid-generic 0003:0518:0001.0005: input,hidraw4: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.0-1.3.3/input1 |
| [ 4.484577] systemd[1]: Inserted module 'autofs4' |
| [ 4.500927] systemd[1]: systemd 243-8 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) |
| [ 4.522422] systemd[1]: Detected architecture x86-64. |
| [ 4.529227] systemd[1]: Set hostname to <debianDesktop>. |
| [ 4.667245] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. |
| [ 4.683402] systemd[1]: /lib/systemd/system/libvirtd-admin.socket:8: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/libvirt-admin-sock → /run/libvirt/libvirt-admin-sock; please update the unit file accordingly. |
| [ 4.686881] systemd[1]: /lib/systemd/system/libvirtd-ro.socket:8: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/libvirt-sock-ro → /run/libvirt/libvirt-sock-ro; please update the unit file accordingly. |
| [ 4.690450] systemd[1]: /lib/systemd/system/libvirtd.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/libvirt-sock → /run/libvirt/libvirt-sock; please update the unit file accordingly. |
| [ 4.694120] systemd[1]: /lib/systemd/system/virtlockd.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlockd-sock → /run/libvirt/virtlockd-sock; please update the unit file accordingly. |
| [ 4.698071] systemd[1]: /lib/systemd/system/virtlockd-admin.socket:8: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlockd-admin-sock → /run/libvirt/virtlockd-admin-sock; please update the unit file accordingly. |
| [ 4.702101] systemd[1]: /lib/systemd/system/virtlogd.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlogd-sock → /run/libvirt/virtlogd-sock; please update the unit file accordingly. |
| [ 4.800409] RPC: Registered named UNIX socket transport module. |
| [ 4.800410] RPC: Registered udp transport module. |
| [ 4.800410] RPC: Registered tcp transport module. |
| [ 4.800411] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 4.805669] BTRFS info (device sda4): use lzo compression, level 0 |
| [ 4.814485] BTRFS info (device sda4): disk space caching is enabled |
| [ 4.820401] lp: driver loaded but no devices found |
| [ 4.822623] ppdev: user-space parallel port driver |
| [ 4.831201] f71882fg: Found f71808a chip at 0x290, revision 33 |
| [ 4.831250] f71882fg f71882fg.656: Fan: 1 is in duty-cycle mode |
| [ 4.831255] f71882fg f71882fg.656: Auto pwm controlled by raw digital data, disabling pwm auto_point sysfs attributes for fan 1 |
| [ 4.831257] f71882fg f71882fg.656: Fan: 2 is in duty-cycle mode |
| [ 4.831267] f71882fg f71882fg.656: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). |
| [ 5.047426] EDAC ie31200: No ECC support |
| [ 5.101154] systemd-journald[463]: Received client request to flush runtime journal. |
| [ 5.119331] sd 1:0:0:0: Attached scsi generic sg0 type 0 |
| [ 5.120716] sd 4:0:0:0: Attached scsi generic sg1 type 0 |
| [ 5.122804] iTCO_vendor_support: vendor-support=0 |
| [ 5.124442] input: PC Speaker as /devices/platform/pcspkr/input/input10 |
| [ 5.125977] sd 5:0:0:0: Attached scsi generic sg2 type 0 |
| [ 5.127121] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 5.128540] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| [ 5.128595] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS |
| [ 5.129849] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| [ 5.132665] RAPL PMU: hw unit of domain package 2^-16 Joules |
| [ 5.134081] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| [ 5.139983] media: Linux media interface: v0.10 |
| [ 5.189380] videodev: Linux video capture interface: v2.00 |
| [ 5.198317] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) |
| [ 5.215770] uvcvideo: Found UVC 1.00 device Webcam C170 (046d:082b) |
| [ 5.239961] uvcvideo 3-1.4:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 5.241401] uvcvideo 3-1.4:1.0: Entity type for entity Extension 6 was not initialized! |
| [ 5.242918] uvcvideo 3-1.4:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 5.244550] input: Webcam C170: Webcam C170 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input11 |
| [ 5.246153] usbcore: registered new interface driver uvcvideo |
| [ 5.247648] USB Video Class driver (1.1.1) |
| [ 5.263175] usbcore: registered new interface driver snd-usb-audio |
| [ 5.288189] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) |
| [ 5.327804] snd_hda_codec_realtek hdaudioC2D2: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line |
| [ 5.327806] snd_hda_codec_realtek hdaudioC2D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 5.327807] snd_hda_codec_realtek hdaudioC2D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) |
| [ 5.327808] snd_hda_codec_realtek hdaudioC2D2: mono: mono_out=0x0 |
| [ 5.327809] snd_hda_codec_realtek hdaudioC2D2: dig-out=0x1e/0x0 |
| [ 5.327810] snd_hda_codec_realtek hdaudioC2D2: inputs: |
| [ 5.327812] snd_hda_codec_realtek hdaudioC2D2: Front Mic=0x19 |
| [ 5.327813] snd_hda_codec_realtek hdaudioC2D2: Rear Mic=0x18 |
| [ 5.327814] snd_hda_codec_realtek hdaudioC2D2: Line=0x1a |
| [ 5.391822] Bluetooth: Core ver 2.22 |
| [ 5.393336] NET: Registered protocol family 31 |
| [ 5.394722] Bluetooth: HCI device and connection manager initialized |
| [ 5.396212] Bluetooth: HCI socket layer initialized |
| [ 5.397593] Bluetooth: L2CAP socket layer initialized |
| [ 5.399145] Bluetooth: SCO socket layer initialized |
| [ 5.400765] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card2/input12 |
| [ 5.402324] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card2/input13 |
| [ 5.403877] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card2/input14 |
| [ 5.405428] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card2/input15 |
| [ 5.407050] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card2/input16 |
| [ 5.408532] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card2/input17 |
| [ 5.410031] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card2/input18 |
| [ 5.410092] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card2/input19 |
| [ 5.410156] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card2/input20 |
| [ 5.410221] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card2/input21 |
| [ 5.426881] usb 3-1.5: firmware: direct-loading firmware ath3k-1.fw |
| [ 5.450044] intel_rapl: Found RAPL domain package |
| [ 5.451812] intel_rapl: Found RAPL domain core |
| [ 5.453438] intel_rapl: Found RAPL domain uncore |
| [ 5.478355] Adding 16776188k swap on /dev/sda5. Priority:-2 extents:1 across:16776188k SSFS |
| [ 5.604230] audit: type=1400 audit(1577916893.150:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=862 comm="apparmor_parser" |
| [ 5.605814] audit: type=1400 audit(1577916893.150:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=861 comm="apparmor_parser" |
| [ 5.607376] audit: type=1400 audit(1577916893.150:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=860 comm="apparmor_parser" |
| [ 5.607387] audit: type=1400 audit(1577916893.150:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=866 comm="apparmor_parser" |
| [ 5.607388] audit: type=1400 audit(1577916893.150:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=866 comm="apparmor_parser" |
| [ 5.607390] audit: type=1400 audit(1577916893.150:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=866 comm="apparmor_parser" |
| [ 5.607392] audit: type=1400 audit(1577916893.154:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=865 comm="apparmor_parser" |
| [ 5.607394] audit: type=1400 audit(1577916893.154:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=865 comm="apparmor_parser" |
| [ 5.607395] audit: type=1400 audit(1577916893.154:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=859 comm="apparmor_parser" |
| [ 5.607397] audit: type=1400 audit(1577916893.154:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=864 comm="apparmor_parser" |
| [ 5.668917] usbcore: registered new interface driver ath3k |
| [ 5.754216] usb 3-1.5: USB disconnect, device number 6 |
| [ 6.271299] sky2 0000:04:00.0 eth0: enabling interface |
| [ 7.010314] usb 3-1.5: new full-speed USB device number 8 using ehci-pci |
| [ 7.023666] L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for details. |
| [ 7.119532] usb 3-1.5: New USB device found, idVendor=0cf3, idProduct=3005, bcdDevice= 0.01 |
| [ 7.121517] usb 3-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 7.137390] usbcore: registered new interface driver btusb |
| [ 7.175219] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 7.176916] Bluetooth: BNEP filters: protocol multicast |
| [ 7.178566] Bluetooth: BNEP socket layer initialized |
| [ 8.735688] sky2 0000:04:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both |
| [ 8.737768] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 9.653824] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. |
| [ 9.656517] Bridge firewalling registered |
| [ 9.858662] Initializing XFRM netlink socket |
| [ 11.326325] usb 3-1.4: reset high-speed USB device number 4 using ehci-pci |
| [ 11.579666] Bluetooth: RFCOMM TTY layer initialized |
| [ 11.579673] Bluetooth: RFCOMM socket layer initialized |
| [ 11.579678] Bluetooth: RFCOMM ver 1.11 |
| [ 12.344417] rfkill: input handler disabled |
| [ 18.723914] rfkill: input handler enabled |
| [ 19.447375] fuse: init (API version 7.31) |
| [ 21.339468] rfkill: input handler disabled |