[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.51-1
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=7d581789-2cdd-423e-9a8b-b89626891401 ro quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 0000000000001000 type 16
[    0.000000]  BIOS-e820: 0000000000001000 - 00000000000a0000 (usable)
[    0.000000]  BIOS-e820: 00000000000a0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bf6d0000 (usable)
[    0.000000]  BIOS-e820: 00000000bf6d0000 - 00000000bf800000 type 16
[    0.000000]  BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000c1c00000 - 00000000c4000000 (reserved)
[    0.000000]  BIOS-e820: 00000000d0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fee00000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000134000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Packard Bell EasyNote LM85/EasyNote LM85, BIOS 4.0-5803-gb1ccccc 04/20/2014
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x134000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0BF800000 mask FFF800000 uncachable
[    0.000000]   1 base 0C0000000 mask FF0000000 uncachable
[    0.000000]   2 base 0D0000000 mask FF0000000 write-combining
[    0.000000]   3 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] last_pfn = 0xbf6d0 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000bf6d0000
[    0.000000]  0000000000 - 00bf600000 page 2M
[    0.000000]  00bf600000 - 00bf6d0000 page 4k
[    0.000000] kernel direct mapping tables up to bf6d0000 @ 1fffb000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-0000000134000000
[    0.000000]  0100000000 - 0134000000 page 2M
[    0.000000] kernel direct mapping tables up to 134000000 @ bf6ce000-bf6d0000
[    0.000000] RAMDISK: 36bfa000 - 375f5000
[    0.000000] ACPI: RSDP 00000000000f0000 00024 (v02 CORE  )
[    0.000000] ACPI: XSDT 00000000bf6e0ee0 0004C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 00000000bf6e1010 00038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 00000000bf6e1050 00074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: MCFG 00000000bf6e10d0 0003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 00000000bf6e4540 000F4 (v03 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 00000000bf6e1150 032EE (v03 COREv4 COREBOOT 20140108 INTL 20140325)
[    0.000000] ACPI: FACS 00000000bf6e1110 00040
[    0.000000] ACPI: SSDT 00000000bf6e4640 00670 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000134000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000134000000
[    0.000000]   NODE_DATA [0000000133ffb000 - 0000000133ffffff]
[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88012f800000-ffff880132ffffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00134000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x000000a0
[    0.000000]     0: 0x00000100 -> 0x000bf6d0
[    0.000000]     0: 0x00100000 -> 0x00134000
[    0.000000] On node 0 totalpages: 996960
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3922 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 765704 pages, LIFO batch:31
[    0.000000]   Normal zone: 2912 pages used for memmap
[    0.000000]   Normal zone: 210080 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000010000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bf6d0000 - 00000000bf800000
[    0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
[    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000c1c00000
[    0.000000] PM: Registered nosave memory: 00000000c1c00000 - 00000000c4000000
[    0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000d0000000
[    0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fed00000
[    0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at f0000000 (gap: f0000000:ed00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff880133c00000 s82944 r8192 d23552 u1048576
[    0.000000] pcpu-alloc: s82944 r8192 d23552 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 979706
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=7d581789-2cdd-423e-9a8b-b89626891401 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3845468k/5046272k available (3426k kernel code, 1058432k absent, 142372k reserved, 3312k data, 576k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:512 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2128.307 MHz processor.
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4256.61 BogoMIPS (lpj=8513228)
[    0.000007] pid_max: default: 32768 minimum: 301
[    0.000047] Security Framework initialized
[    0.000052] AppArmor: AppArmor disabled by boot time parameter
[    0.000311] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001294] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.001725] Mount-cache hash table entries: 256
[    0.001847] Initializing cgroup subsys cpuacct
[    0.001852] Initializing cgroup subsys memory
[    0.001862] Initializing cgroup subsys devices
[    0.001866] Initializing cgroup subsys freezer
[    0.001868] Initializing cgroup subsys net_cls
[    0.001870] Initializing cgroup subsys blkio
[    0.001877] Initializing cgroup subsys perf_event
[    0.001908] CPU: Physical Processor ID: 0
[    0.001909] CPU: Processor Core ID: 0
[    0.001915] mce: CPU supports 9 MCE banks
[    0.001927] CPU0: Thermal monitoring enabled (TM1)
[    0.001936] using mwait in idle threads.
[    0.002378] ACPI: Core revision 20110623
[    0.005472] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.045146] CPU0: Intel(R) Pentium(R) CPU        P6200  @ 2.13GHz stepping 05
[    0.151452] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[    0.151460] ... version:                3
[    0.151461] ... bit width:              48
[    0.151462] ... generic registers:      4
[    0.151464] ... value mask:             0000ffffffffffff
[    0.151466] ... max period:             000000007fffffff
[    0.151467] ... fixed-purpose events:   3
[    0.151468] ... event mask:             000000070000000f
[    0.151623] NMI watchdog enabled, takes one hw-pmu counter.
[    0.151744] Booting Node   0, Processors  #1 Ok.
[    0.151746] smpboot cpu 1: start_ip = 9a000
[    0.259537] NMI watchdog enabled, takes one hw-pmu counter.
[    0.259581] Brought up 2 CPUs
[    0.259584] Total of 2 processors activated (8512.52 BogoMIPS).
[    0.260920] devtmpfs: initialized
[    0.265174] print_constraints: dummy: 
[    0.265235] NET: Registered protocol family 16
[    0.265342] ACPI: bus type pci registered
[    0.265415] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.265418] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.283438] PCI: Using configuration type 1 for base access
[    0.284189] bio: create slab <bio-0> at 0
[    0.284292] ACPI: Added _OSI(Module Device)
[    0.284295] ACPI: Added _OSI(Processor Device)
[    0.284297] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.284299] ACPI: Added _OSI(Processor Aggregator Device)
[    0.285166] ACPI: EC: Look up EC in DSDT
[    0.287722] ACPI: Interpreter enabled
[    0.287726] ACPI: (supports S0 S3 S4 S5)
[    0.287754] ACPI: Using IOAPIC for interrupt routing
[    0.295035] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.295155] ACPI: No dock devices found.
[    0.295157] HEST: Table not found.
[    0.295160] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.295281] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.295473] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.295476] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.295478] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.295481] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[    0.295483] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[    0.295486] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[    0.295488] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[    0.295490] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[    0.295493] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    0.295495] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    0.295497] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[    0.295500] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[    0.295502] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[    0.295504] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[    0.295507] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[    0.295509] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
[    0.295511] pci_root PNP0A08:00: host bridge window [mem 0xc4000000-0xfebfffff]
[    0.295514] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[    0.295532] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[    0.295551] DMAR: Disabling batched IOTLB flush on Ironlake
[    0.295575] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
[    0.295609] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.295624] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
[    0.295635] pci 0000:00:02.0: reg 10: [mem 0xcf800000-0xcfbfffff 64bit]
[    0.295642] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.295648] pci 0000:00:02.0: reg 20: [io  0x1020-0x1027]
[    0.295712] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[    0.295740] pci 0000:00:16.0: reg 10: [mem 0xcfe06100-0xcfe0610f 64bit]
[    0.295832] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.295871] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[    0.295891] pci 0000:00:1a.0: reg 10: [mem 0xcfe05800-0xcfe05bff]
[    0.295976] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.296003] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[    0.296017] pci 0000:00:1b.0: reg 10: [mem 0xcfe00000-0xcfe03fff 64bit]
[    0.296081] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.296104] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[    0.296169] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.296193] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[    0.296257] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.296294] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[    0.296314] pci 0000:00:1d.0: reg 10: [mem 0xcfe05c00-0xcfe05fff]
[    0.296399] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.296421] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.296483] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
[    0.296606] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
[    0.296631] pci 0000:00:1f.2: reg 10: [io  0x1028-0x102f]
[    0.296641] pci 0000:00:1f.2: reg 14: [io  0x1038-0x103b]
[    0.296651] pci 0000:00:1f.2: reg 18: [io  0x1030-0x1037]
[    0.296661] pci 0000:00:1f.2: reg 1c: [io  0x103c-0x103f]
[    0.296672] pci 0000:00:1f.2: reg 20: [io  0x1000-0x101f]
[    0.296681] pci 0000:00:1f.2: reg 24: [mem 0xcfe05000-0xcfe057ff]
[    0.296742] pci 0000:00:1f.2: PME# supported from D3hot
[    0.296766] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[    0.296781] pci 0000:00:1f.3: reg 10: [mem 0xcfe06000-0xcfe060ff 64bit]
[    0.296802] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
[    0.296839] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[    0.296861] pci 0000:00:1f.6: reg 10: [mem 0xcfe04000-0xcfe04fff 64bit]
[    0.296960] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.297056] pci 0000:02:00.0: [14e4:1692] type 0 class 0x000200
[    0.297082] pci 0000:02:00.0: reg 10: [mem 0xcfc00000-0xcfc0ffff 64bit]
[    0.297218] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.297280] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.297286] pci 0000:00:1c.0:   bridge window [mem 0xcfc00000-0xcfcfffff]
[    0.297356] pci 0000:03:00.0: [168c:002e] type 0 class 0x000280
[    0.297384] pci 0000:03:00.0: reg 10: [mem 0xcfd00000-0xcfd0ffff 64bit]
[    0.297517] pci 0000:03:00.0: supports D1
[    0.297519] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[    0.297578] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.297584] pci 0000:00:1c.1:   bridge window [mem 0xcfd00000-0xcfdfffff]
[    0.297645] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[    0.297655] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.297658] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.297660] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.297663] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[    0.297666] pci 0000:00:1e.0:   bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[    0.297668] pci 0000:00:1e.0:   bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[    0.297671] pci 0000:00:1e.0:   bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
[    0.297674] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.297676] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.297679] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.297682] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.297684] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.297687] pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    0.297690] pci 0000:00:1e.0:   bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[    0.297692] pci 0000:00:1e.0:   bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[    0.297695] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[    0.297698] pci 0000:00:1e.0:   bridge window [mem 0xc4000000-0xfebfffff] (subtractive decode)
[    0.297700] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[    0.297718] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.297974] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.298278] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.298645]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.298691]  pci0000:00: ACPI _OSC control (0x1d) granted
[    0.302176] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
[    0.302225] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[    0.302247] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[    0.302271] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[    0.302291] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[    0.302311] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[    0.302330] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[    0.302365]  pci0000:ff: Requesting ACPI _OSC control (0x1d)
[    0.302369]  pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.302371] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.302668] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.302722] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.302774] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.302826] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.302877] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.302928] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.302981] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.303032] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.303148] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.303158] vgaarb: loaded
[    0.303160] vgaarb: bridge control possible 0000:00:02.0
[    0.303205] PCI: Using ACPI for IRQ routing
[    0.312026] PCI: pci_cache_line_size set to 64 bytes
[    0.312168] reserve RAM buffer: 00000000bf6d0000 - 00000000bfffffff 
[    0.312294] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.312300] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.314319] Switching to clocksource hpet
[    0.316254] pnp: PnP ACPI init
[    0.316270] ACPI: bus type pnp registered
[    0.316363] pnp 00:00: [bus 00-ff]
[    0.316366] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.316368] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.316370] pnp 00:00: [io  0x0d00-0xffff window]
[    0.316373] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.316375] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.316377] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.316379] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.316381] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.316383] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.316386] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.316388] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.316390] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.316392] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.316394] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.316396] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.316398] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.316400] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.316403] pnp 00:00: [mem 0xc4000000-0xfebfffff window]
[    0.316405] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.316455] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.316477] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[    0.316480] pnp 00:01: [mem 0xfed10000-0xfed17fff]
[    0.316482] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[    0.316484] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[    0.316486] pnp 00:01: [mem 0xe0000000-0xe3ffffff]
[    0.316488] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[    0.316491] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[    0.316493] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[    0.316495] pnp 00:01: [mem 0x20000000-0x201fffff]
[    0.316497] pnp 00:01: [mem 0x40000000-0x401fffff]
[    0.316546] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.316549] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.316552] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.316555] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.316557] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
[    0.316560] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.316563] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.316567] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.316570] system 00:01: [mem 0x20000000-0x201fffff] could not be reserved
[    0.316573] system 00:01: [mem 0x40000000-0x401fffff] could not be reserved
[    0.316576] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.318526] pnp 00:02: [io  0x0000-0x001f]
[    0.318529] pnp 00:02: [io  0x0081-0x0091]
[    0.318531] pnp 00:02: [io  0x0093-0x009f]
[    0.318533] pnp 00:02: [io  0x00c0-0x00df]
[    0.318536] pnp 00:02: [dma 4]
[    0.318581] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.318592] pnp 00:03: [mem 0xff000000-0xffffffff]
[    0.318626] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[    0.318713] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    0.318771] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.318774] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.318788] pnp 00:05: [io  0x00f0]
[    0.318798] pnp 00:05: [irq 13]
[    0.318836] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.318849] pnp 00:06: [io  0x002e-0x002f]
[    0.318851] pnp 00:06: [io  0x004e-0x004f]
[    0.318854] pnp 00:06: [io  0x0061]
[    0.318856] pnp 00:06: [io  0x0063]
[    0.318858] pnp 00:06: [io  0x0065]
[    0.318859] pnp 00:06: [io  0x0067]
[    0.318861] pnp 00:06: [io  0x0080]
[    0.318863] pnp 00:06: [io  0x0092]
[    0.318865] pnp 00:06: [io  0x00b2-0x00b3]
[    0.318867] pnp 00:06: [io  0x0500-0x057f]
[    0.318868] pnp 00:06: [io  0x0480-0x04bf]
[    0.318921] system 00:06: [io  0x0500-0x057f] has been reserved
[    0.318924] system 00:06: [io  0x0480-0x04bf] has been reserved
[    0.318927] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.318938] pnp 00:07: [io  0x0070-0x0077]
[    0.318974] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.318994] pnp 00:08: [io  0x0060]
[    0.318996] pnp 00:08: [io  0x0064]
[    0.319002] pnp 00:08: [irq 1]
[    0.319040] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.319061] pnp 00:09: [irq 12]
[    0.319098] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.319117] pnp 00:0a: [bus ff]
[    0.319154] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.319164] pnp: PnP ACPI: found 11 devices
[    0.319166] ACPI: ACPI bus type pnp unregistered
[    0.326074] PCI: max bus depth: 1 pci_try_num: 2
[    0.326102] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.326108] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.326114] pci 0000:00:1c.0:   bridge window [mem 0xcfc00000-0xcfcfffff]
[    0.326121] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.326126] pci 0000:00:1c.1:   bridge window [mem 0xcfd00000-0xcfdfffff]
[    0.326134] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[    0.326157] pci 0000:00:01.0: setting latency timer to 64
[    0.326166] pci 0000:00:1c.0: setting latency timer to 64
[    0.326177] pci 0000:00:1c.1: setting latency timer to 64
[    0.326183] pci 0000:00:1e.0: setting latency timer to 64
[    0.326187] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.326190] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.326192] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.326194] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.326196] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.326198] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.326201] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[    0.326203] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.326205] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.326207] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.326209] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[    0.326211] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.326213] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.326215] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[    0.326218] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[    0.326220] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[    0.326222] pci_bus 0000:00: resource 20 [mem 0xc4000000-0xfebfffff]
[    0.326224] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
[    0.326227] pci_bus 0000:02: resource 1 [mem 0xcfc00000-0xcfcfffff]
[    0.326229] pci_bus 0000:03: resource 1 [mem 0xcfd00000-0xcfdfffff]
[    0.326231] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.326233] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.326235] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.326238] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.326240] pci_bus 0000:04: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.326242] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.326244] pci_bus 0000:04: resource 10 [mem 0x000cc000-0x000cffff]
[    0.326246] pci_bus 0000:04: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.326248] pci_bus 0000:04: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.326250] pci_bus 0000:04: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.326252] pci_bus 0000:04: resource 14 [mem 0x000dc000-0x000dffff]
[    0.326255] pci_bus 0000:04: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.326257] pci_bus 0000:04: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.326259] pci_bus 0000:04: resource 17 [mem 0x000e8000-0x000ebfff]
[    0.326261] pci_bus 0000:04: resource 18 [mem 0x000ec000-0x000effff]
[    0.326263] pci_bus 0000:04: resource 19 [mem 0x000f0000-0x000fffff]
[    0.326265] pci_bus 0000:04: resource 20 [mem 0xc4000000-0xfebfffff]
[    0.326267] pci_bus 0000:04: resource 21 [mem 0xfed40000-0xfed44fff]
[    0.326332] NET: Registered protocol family 2
[    0.326463] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.327335] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.329050] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.329253] TCP: Hash tables configured (established 524288 bind 65536)
[    0.329255] TCP reno registered
[    0.329263] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.329286] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.329409] NET: Registered protocol family 1
[    0.329427] pci 0000:00:02.0: Boot video device
[    0.329585] PCI: CLS 64 bytes, default 64
[    0.329642] Unpacking initramfs...
[    0.566513] Freeing initrd memory: 10220k freed
[    0.568782] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.568788] Placing 64MB software IO TLB between ffff8800bb6ce000 - ffff8800bf6ce000
[    0.568790] software IO TLB at phys 0xbb6ce000 - 0xbf6ce000
[    0.569273] audit: initializing netlink socket (disabled)
[    0.569285] type=2000 audit(1398020884.440:1): initialized
[    0.585467] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.586327] VFS: Disk quotas dquot_6.5.2
[    0.586355] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.586426] msgmni has been set to 7530
[    0.586595] alg: No test for stdrng (krng)
[    0.586627] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.586630] io scheduler noop registered
[    0.586632] io scheduler deadline registered
[    0.586646] io scheduler cfq registered (default)
[    0.586739] pcieport 0000:00:01.0: setting latency timer to 64
[    0.586769] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.586834] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.586869] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.586932] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.586966] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    0.587055] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    0.587059] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    0.587077] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.587080] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.587084] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.587102] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.587105] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.587109] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.587127] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.587148] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.587150] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.587432] intel_idle: MWAIT substates: 0x120
[    0.587434] intel_idle: v0.4 model 0x25
[    0.587435] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.587470] ERST: Table is not found!
[    0.587472] GHES: HEST is not enabled!
[    0.587533] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.634613] Linux agpgart interface v0.103
[    0.634695] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[    0.634758] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    0.635291] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    0.635453] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    0.635594] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.655421] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.655430] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.655564] mousedev: PS/2 mouse device common for all mice
[    0.655926] rtc_cmos 00:07: RTC can wake from S4
[    0.656047] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    0.656077] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.656120] cpuidle: using governor ladder
[    0.656158] cpuidle: using governor menu
[    0.656365] TCP cubic registered
[    0.656451] NET: Registered protocol family 10
[    0.656958] Mobile IPv6
[    0.656961] NET: Registered protocol family 17
[    0.656965] Registering the dns_resolver key type
[    0.657286] PM: Hibernation image not present or could not be loaded.
[    0.657297] registered taskstats version 1
[    0.657979] rtc_cmos 00:07: setting system clock to 2014-04-20 19:08:05 UTC (1398020885)
[    0.658021] Initializing network drop monitor service
[    0.659390] Freeing unused kernel memory: 576k freed
[    0.659479] Write protecting the kernel read-only data: 6144k
[    0.662296] Freeing unused kernel memory: 652k freed
[    0.665274] Freeing unused kernel memory: 688k freed
[    0.675889] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.681136] udevd[49]: starting version 175
[    0.696136] usbcore: registered new interface driver usbfs
[    0.696166] usbcore: registered new interface driver hub
[    0.717316] usbcore: registered new device driver usb
[    0.717723] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.717774] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.717779] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    0.717806] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.717838] ehci_hcd 0000:00:1a.0: debug port 2
[    0.721743] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    0.730802] tg3.c:v3.121 (November 2, 2011)
[    0.730858] tg3 0000:02:00.0: setting latency timer to 64
[    0.734635] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xcfe05800
[    0.747110] thermal LNXTHERM:00: registered as thermal_zone0
[    0.747113] ACPI: Thermal Zone [THM0] (44 C)
[    0.750162] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.750192] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.750194] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.750197] usb usb1: Product: EHCI Host Controller
[    0.750199] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    0.750201] usb usb1: SerialNumber: 0000:00:1a.0
[    0.750317] hub 1-0:1.0: USB hub found
[    0.750322] hub 1-0:1.0: 6 ports detected
[    0.750489] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.750495] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    0.750506] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.750536] ehci_hcd 0000:00:1d.0: debug port 2
[    0.754514] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    0.755955] thermal LNXTHERM:01: registered as thermal_zone1
[    0.755958] ACPI: Thermal Zone [THM1] (27 C)
[    0.759229] ehci_hcd 0000:00:1d.0: irq 19, io mem 0xcfe05c00
[    0.767190] tg3 mdio bus: probed
[    0.767437] SCSI subsystem initialized
[    0.769270] libata version 3.00 loaded.
[    0.774158] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.774213] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.774215] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.774218] usb usb2: Product: EHCI Host Controller
[    0.774220] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    0.774222] usb usb2: SerialNumber: 0000:00:1d.0
[    0.774338] hub 2-0:1.0: USB hub found
[    0.774343] hub 2-0:1.0: 8 ports detected
[    0.774718] ahci 0000:00:1f.2: version 3.0
[    0.774797] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[    0.774832] ahci: SSS flag set, parallel bus scan disabled
[    0.774867] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x11 impl SATA mode
[    0.774871] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    0.774876] ahci 0000:00:1f.2: setting latency timer to 64
[    0.777682] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 20:6a:8a:2f:fa:2c
[    0.777687] tg3 0000:02:00.0: eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=200:01)
[    0.777690] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    0.777693] tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    0.778146] scsi0 : ahci
[    0.778254] scsi1 : ahci
[    0.778421] scsi2 : ahci
[    0.778659] scsi3 : ahci
[    0.779890] scsi4 : ahci
[    0.780010] ata1: SATA max UDMA/133 abar m2048@0xcfe05000 port 0xcfe05100 irq 43
[    0.780013] ata2: DUMMY
[    0.780014] ata3: DUMMY
[    0.780015] ata4: DUMMY
[    0.780018] ata5: SATA max UDMA/133 abar m2048@0xcfe05000 port 0xcfe05300 irq 43
[    1.062083] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.098066] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.098859] ata1.00: ATA-8: SanDisk SDSSDH2256G, X211200, max UDMA/133
[    1.098866] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.099735] ata1.00: configured for UDMA/133
[    1.100049] scsi 0:0:0:0: Direct-Access     ATA      SanDisk SDSSDH22 X211 PQ: 0 ANSI: 5
[    1.194556] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    1.194563] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.194984] hub 1-1:1.0: USB hub found
[    1.195171] hub 1-1:1.0: 6 ports detected
[    1.306001] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    1.417923] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.420969] ata5.00: ATAPI: Slimtype DVD A  DS8A5SH, XA15, max UDMA/100
[    1.422338] ata5.00: configured for UDMA/100
[    1.428786] scsi 4:0:0:0: CD-ROM            Slimtype DVD A  DS8A5SH   XA15 PQ: 0 ANSI: 5
[    1.433091] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    1.433150] sd 0:0:0:0: [sda] Write Protect is off
[    1.433152] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.433170] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.438471] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    1.438479] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.438495]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[    1.438865] hub 2-1:1.0: USB hub found
[    1.438919] hub 2-1:1.0: 8 ports detected
[    1.439870] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.441056] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.441059] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.441232] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    1.442545] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.442614] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    1.565865] Refined TSC clocksource calibration: 2128.000 MHz.
[    1.565874] Switching to clocksource tsc
[    1.691585] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    1.710041] usb 2-1.5: new high-speed USB device number 3 using ehci_hcd
[    1.855654] usb 2-1.5: New USB device found, idVendor=058f, idProduct=b002
[    1.855662] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.855668] usb 2-1.5: Product: 1.3M HD WebCam
[    1.855672] usb 2-1.5: Manufacturer: AAB1K0D9J
[    1.966860] udevd[345]: starting version 175
[    2.060275] ACPI: Requesting acpi_cpufreq
[    2.060559] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:21/PNP0C09:00/PNP0C0D:00/input/input1
[    2.062041] ACPI: Lid Switch [LID]
[    2.067737] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    2.067744] ACPI: Power Button [PWRF]
[    2.077699] iTCO_vendor_support: vendor-support=0
[    2.079228] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    2.079319] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0560)
[    2.081288] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.082612] intel ips 0000:00:1f.6: No CPUID match found.
[    2.082615] intel ips 0000:00:1f.6: IPS not supported on this CPU
[    2.086794] [drm] Initialized drm 1.1.0 20060810
[    2.097333] cfg80211: Calling CRDA to update world regulatory domain
[    2.122706] input: PC Speaker as /devices/platform/pcspkr/input/input3
[    2.169792] acpi device:06: registered as cooling_device2
[    2.169873] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    2.169927] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.201983] udevd[457]: renamed network interface eth0 to eth2
[    2.207957] Linux media interface: v0.10
[    2.230986] cfg80211: World regulatory domain updated:
[    2.230990] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    2.230994] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    2.230997] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    2.231000] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    2.231003] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    2.231006] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    2.327159] ACPI: Battery Slot [BAT0] (battery present)
[    2.331453] ACPI: AC Adapter [AC] (on-line)
[    2.335529] Linux video capture interface: v2.00
[    2.338013] ath9k 0000:03:00.0: setting latency timer to 64
[    2.349738] i915 0000:00:02.0: setting latency timer to 64
[    2.376736] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[    2.376741] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.376743] [drm] Driver supports precise vblank timestamp query.
[    2.376786] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.423380] uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (058f:b002)
[    2.428395] input: 1.3M HD WebCam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input5
[    2.428526] usbcore: registered new interface driver uvcvideo
[    2.428528] USB Video Class driver (1.1.1)
[    2.429850] ath: EEPROM regdomain: 0x65
[    2.429852] ath: EEPROM indicates we should expect a direct regpair map
[    2.429855] ath: Country alpha2 being used: 00
[    2.429857] ath: Regpair used: 0x65
[    2.436472] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    2.437026] Registered led device: ath9k-phy0
[    2.437035] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90000660000, irq=17
[    2.577838] udevd[397]: renamed network interface wlan0 to wlan1
[    2.619570] fbcon: inteldrmfb (fb0) is primary device
[    2.810381] Console: switching to colour frame buffer device 200x56
[    2.823258] fb0: inteldrmfb frame buffer device
[    2.823262] drm: registered panic notifier
[    2.823342] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.823549] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[    2.823578] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    2.880029] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[    2.889179] HDMI status: Codec=3 Pin=4 Presence_Detect=0 ELD_Valid=0
[    2.889410] input: HDA Intel HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    2.889633] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    3.454910] EXT4-fs (sda6): re-mounted. Opts: (null)
[    3.520265] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[    3.557182] loop: module loaded
[    3.584714] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000
[    3.657418] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[    4.171673] FAT-fs (sda5): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[    4.674507] RPC: Registered named UNIX socket transport module.
[    4.674514] RPC: Registered udp transport module.
[    4.674517] RPC: Registered tcp transport module.
[    4.674521] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    4.683283] FS-Cache: Loaded
[    4.697210] FS-Cache: Netfs 'nfs' registered for caching
[    4.705771] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    5.766512] Bluetooth: Core ver 2.16
[    5.766532] NET: Registered protocol family 31
[    5.766534] Bluetooth: HCI device and connection manager initialized
[    5.766536] Bluetooth: HCI socket layer initialized
[    5.766538] Bluetooth: L2CAP socket layer initialized
[    5.766543] Bluetooth: SCO socket layer initialized
[    5.777992] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    5.777995] Bluetooth: BNEP filters: protocol multicast
[    5.785514] Bluetooth: RFCOMM TTY layer initialized
[    5.785519] Bluetooth: RFCOMM socket layer initialized
[    5.785521] Bluetooth: RFCOMM ver 1.11
[    5.830710] lp: driver loaded but no devices found
[    5.832398] tg3 0000:02:00.0: irq 46 for MSI/MSI-X
[    5.839485] ADDRCONF(NETDEV_UP): eth2: link is not ready
[    5.844695] ppdev: user-space parallel port driver
[    5.901822] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[    6.559003] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10
[    6.772545] tg3 0000:02:00.0: eth2: Link is down
[    7.772139] tg3 0000:02:00.0: eth2: Link is up at 100 Mbps, full duplex
[    7.772147] tg3 0000:02:00.0: eth2: Flow control is on for TX and on for RX
[    7.772925] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[   18.674606] eth2: no IPv6 routers present