blob: 67798069f531f04aa5dcdd87a6d166e1e5143f09 [file] [log] [blame]
[ 0.000000] Linux version 4.20.0-rc4-00001-gb04a3905d8a6 (martin@laptop) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #36 SMP Mon Nov 26 08:09:59 CET 2018
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.20.0-rc4-00001-gb04a3905d8a6 root=UUID=5e6b38be-bc16-475b-8de3-1e5acbc60d52 ro iomem=relaxed
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff23fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bff24000-0x00000000c29fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043d5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 232566G/232566G, BIOS CBET4000 4.8-2253-g717f4d5e14 11/23/2018
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2893.538 MHz processor
[ 0.001218] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001220] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001223] last_pfn = 0x43d600 max_arch_pfn = 0x400000000
[ 0.001227] MTRR default type: write-back
[ 0.001228] MTRR fixed ranges enabled:
[ 0.001229] 00000-9FFFF write-back
[ 0.001230] A0000-BFFFF uncachable
[ 0.001230] C0000-FFFFF write-back
[ 0.001231] MTRR variable ranges enabled:
[ 0.001232] 0 base 0C0000000 mask FF0000000 uncachable
[ 0.001233] 1 base 0D0000000 mask FF0000000 write-combining
[ 0.001234] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.001234] 3 disabled
[ 0.001234] 4 disabled
[ 0.001235] 5 disabled
[ 0.001235] 6 disabled
[ 0.001236] 7 disabled
[ 0.001236] 8 disabled
[ 0.001236] 9 disabled
[ 0.001985] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002433] last_pfn = 0xbff24 max_arch_pfn = 0x400000000
[ 0.012105] Base memory trampoline at [(____ptrval____)] 99000 size 24576
[ 0.012110] BRK [0x167c01000, 0x167c01fff] PGTABLE
[ 0.012112] BRK [0x167c02000, 0x167c02fff] PGTABLE
[ 0.012113] BRK [0x167c03000, 0x167c03fff] PGTABLE
[ 0.012132] BRK [0x167c04000, 0x167c04fff] PGTABLE
[ 0.012134] BRK [0x167c05000, 0x167c05fff] PGTABLE
[ 0.012180] BRK [0x167c06000, 0x167c06fff] PGTABLE
[ 0.012189] BRK [0x167c07000, 0x167c07fff] PGTABLE
[ 0.012201] BRK [0x167c08000, 0x167c08fff] PGTABLE
[ 0.012334] RAMDISK: [mem 0x353f1000-0x369effff]
[ 0.012339] ACPI: Early table checksum verification disabled
[ 0.012396] ACPI: RSDP 0x00000000000F6770 000024 (v02 CORE )
[ 0.012399] ACPI: XSDT 0x00000000BFF480E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.012404] ACPI: FACP 0x00000000BFF4BB00 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.012409] ACPI: DSDT 0x00000000BFF48280 00387B (v02 COREv4 COREBOOT 20110725 INTL 20180531)
[ 0.012412] ACPI: FACS 0x00000000BFF48240 000040
[ 0.012414] ACPI: FACS 0x00000000BFF48240 000040
[ 0.012416] ACPI: SSDT 0x00000000BFF4BC00 0019AE (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.012419] ACPI: MCFG 0x00000000BFF4D5B0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.012422] ACPI: TCPA 0x00000000BFF4D5F0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.012424] ACPI: APIC 0x00000000BFF4D630 00006C (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.012427] ACPI: DMAR 0x00000000BFF4D6A0 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.012429] ACPI: HPET 0x00000000BFF4F750 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.012436] ACPI: Local APIC address 0xfee00000
[ 0.012511] No NUMA configuration found
[ 0.012512] Faking a node at [mem 0x0000000000000000-0x000000043d5fffff]
[ 0.012516] NODE_DATA(0) allocated [mem 0x43d5ef000-0x43d5f3fff]
[ 0.012543] Zone ranges:
[ 0.012544] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.012546] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.012547] Normal [mem 0x0000000100000000-0x000000043d5fffff]
[ 0.012548] Device empty
[ 0.012549] Movable zone start for each node
[ 0.012550] Early memory node ranges
[ 0.012551] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.012552] node 0: [mem 0x0000000000100000-0x00000000bff23fff]
[ 0.012552] node 0: [mem 0x0000000100000000-0x000000043d5fffff]
[ 0.012561] Zeroed struct page in unavailable ranges: 318 pages
[ 0.012562] Initmem setup node 0 [mem 0x0000000000001000-0x000000043d5fffff]
[ 0.012563] On node 0 totalpages: 4183234
[ 0.012564] DMA zone: 64 pages used for memmap
[ 0.012565] DMA zone: 21 pages reserved
[ 0.012565] DMA zone: 3998 pages, LIFO batch:0
[ 0.012660] DMA32 zone: 12221 pages used for memmap
[ 0.012661] DMA32 zone: 782116 pages, LIFO batch:63
[ 0.031207] Normal zone: 53080 pages used for memmap
[ 0.031209] Normal zone: 3397120 pages, LIFO batch:63
[ 0.108130] Reserving Intel graphics memory at [mem 0xc0a00000-0xc29fffff]
[ 0.108323] ACPI: PM-Timer IO Port: 0x508
[ 0.108325] ACPI: Local APIC address 0xfee00000
[ 0.108340] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.108342] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.108344] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.108346] ACPI: IRQ0 used by override.
[ 0.108347] ACPI: IRQ9 used by override.
[ 0.108349] Using ACPI (MADT) for SMP configuration information
[ 0.108351] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.108356] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.108365] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.108367] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.108367] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.108368] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.108370] PM: Registered nosave memory: [mem 0xbff24000-0xc29fffff]
[ 0.108370] PM: Registered nosave memory: [mem 0xc2a00000-0xefffffff]
[ 0.108371] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.108372] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
[ 0.108373] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.108374] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[ 0.108375] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.108375] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[ 0.108377] [mem 0xc2a00000-0xefffffff] available for PCI devices
[ 0.108378] Booting paravirtualized kernel on bare hardware
[ 0.108381] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.196779] random: get_random_bytes called from start_kernel+0x96/0x4c1 with crng_init=0
[ 0.196786] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.196957] percpu: Embedded 44 pages/cpu @(____ptrval____) s142488 r8192 d29544 u524288
[ 0.196963] pcpu-alloc: s142488 r8192 d29544 u524288 alloc=1*2097152
[ 0.196964] pcpu-alloc: [0] 0 1 2 3
[ 0.196980] Built 1 zonelists, mobility grouping on. Total pages: 4117848
[ 0.196981] Policy zone: Normal
[ 0.196983] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.20.0-rc4-00001-gb04a3905d8a6 root=UUID=5e6b38be-bc16-475b-8de3-1e5acbc60d52 ro iomem=relaxed
[ 0.200494] Calgary: detecting Calgary via BIOS EBDA area
[ 0.200495] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.242688] Memory: 16356680K/16732936K available (10245K kernel code, 1139K rwdata, 3160K rodata, 1592K init, 2432K bss, 376256K reserved, 0K cma-reserved)
[ 0.242771] Kernel/User page tables isolation: enabled
[ 0.242786] ftrace: allocating 31189 entries in 122 pages
[ 0.254371] rcu: Hierarchical RCU implementation.
[ 0.254374] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.254375] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.254376] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.257190] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
[ 0.257779] Console: colour dummy device 80x25
[ 0.257889] printk: console [tty0] enabled
[ 0.257905] ACPI: Core revision 20181003
[ 0.258045] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.258057] hpet clockevent registered
[ 0.258062] APIC: Switch to symmetric I/O mode setup
[ 0.258064] DMAR: Host address width 36
[ 0.258066] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.258071] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.258074] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.258078] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.258081] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.258083] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.258085] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.258510] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.258514] x2apic enabled
[ 0.258521] Switched APIC routing to cluster x2apic.
[ 0.258966] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.278061] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b56a89ddf, max_idle_ns: 440795259072 ns
[ 0.278079] Calibrating delay loop (skipped), value calculated using timer frequency.. 5787.07 BogoMIPS (lpj=11574152)
[ 0.278083] pid_max: default: 32768 minimum: 301
[ 0.278124] LSM: Security Framework initializing
[ 0.278127] Yama: becoming mindful.
[ 0.278133] AppArmor: AppArmor disabled by boot time parameter
[ 0.280491] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.281677] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.281738] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.281777] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.281977] mce: CPU supports 7 MCE banks
[ 0.281986] CPU0: Thermal monitoring enabled (TM1)
[ 0.281995] process: using mwait in idle threads
[ 0.281999] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.282000] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.282003] Spectre V2 : Mitigation: Full generic retpoline
[ 0.282004] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.282006] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.282008] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.282010] Spectre V2 : Spectre v2 cross-process SMT mitigation: Enabling STIBP
[ 0.282013] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.282171] Freeing SMP alternatives memory: 32K
[ 0.283823] TSC deadline timer enabled
[ 0.283826] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.283917] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.283939] ... version: 3
[ 0.283941] ... bit width: 48
[ 0.283942] ... generic registers: 4
[ 0.283944] ... value mask: 0000ffffffffffff
[ 0.283945] ... max period: 00007fffffffffff
[ 0.283947] ... fixed-purpose events: 3
[ 0.283948] ... event mask: 000000070000000f
[ 0.283981] rcu: Hierarchical SRCU implementation.
[ 0.284469] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.284512] smp: Bringing up secondary CPUs ...
[ 0.284594] x86: Booting SMP configuration:
[ 0.284597] .... node #0, CPUs: #1 #2 #3
[ 0.288489] smp: Brought up 1 node, 4 CPUs
[ 0.288489] smpboot: Max logical packages: 1
[ 0.288489] smpboot: Total of 4 processors activated (23148.30 BogoMIPS)
[ 0.290444] devtmpfs: initialized
[ 0.290444] x86/mm: Memory block size: 128MB
[ 0.291282] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.291282] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.291282] pinctrl core: initialized pinctrl subsystem
[ 0.291282] NET: Registered protocol family 16
[ 0.291282] audit: initializing netlink subsys (disabled)
[ 0.291282] audit: type=2000 audit(1543235454.032:1): state=initialized audit_enabled=0 res=1
[ 0.291282] cpuidle: using governor ladder
[ 0.291282] cpuidle: using governor menu
[ 0.291282] ACPI: bus type PCI registered
[ 0.291282] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.291282] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.291282] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.291282] PCI: Using configuration type 1 for base access
[ 0.291282] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.291282] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.291282] ACPI: Added _OSI(Module Device)
[ 0.291282] ACPI: Added _OSI(Processor Device)
[ 0.291282] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.291282] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.291282] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.291282] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.295860] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.296735] ACPI: EC: EC started
[ 0.296738] ACPI: EC: interrupt blocked
[ 0.297002] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.297005] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.297008] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.297010] ACPI: Interpreter enabled
[ 0.297026] ACPI: (supports S0 S3 S4 S5)
[ 0.297028] ACPI: Using IOAPIC for interrupt routing
[ 0.297045] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.297165] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.300452] ACPI: Power Resource [FPWR] (off)
[ 0.300732] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.300738] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.300783] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability LTR]
[ 0.300792] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.300844] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6bff])
[ 0.300995] PCI host bridge to bus 0000:00
[ 0.300998] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.301001] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.301003] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.301006] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.301009] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.301011] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.301014] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.301017] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.301020] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.301022] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.301025] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.301028] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.301031] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.301034] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.301037] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.301040] pci_bus 0000:00: root bus resource [mem 0xc2a00001-0xefffffff window]
[ 0.301043] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.301046] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.301054] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.301136] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.301147] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit]
[ 0.301152] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.301156] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.301226] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.301235] pci 0000:00:04.0: reg 0x10: [mem 0xe1630000-0xe1637fff 64bit]
[ 0.301324] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.301347] pci 0000:00:14.0: reg 0x10: [mem 0xe1620000-0xe162ffff 64bit]
[ 0.301413] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.301511] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.301607] pci 0000:00:16.0: reg 0x10: [mem 0xe1642000-0xe164200f 64bit]
[ 0.301932] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.302051] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.302070] pci 0000:00:19.0: reg 0x10: [mem 0xe1600000-0xe161ffff]
[ 0.302079] pci 0000:00:19.0: reg 0x14: [mem 0xe163c000-0xe163cfff]
[ 0.302087] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f]
[ 0.302144] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.302210] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.302231] pci 0000:00:1a.0: reg 0x10: [mem 0xe163f000-0xe163f3ff]
[ 0.302312] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.302384] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.302404] pci 0000:00:1b.0: reg 0x10: [mem 0xe1638000-0xe163bfff 64bit]
[ 0.302474] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.302549] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.302689] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.302789] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.302931] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.303029] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.303193] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.303291] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.303313] pci 0000:00:1d.0: reg 0x10: [mem 0xe1640000-0xe16403ff]
[ 0.303393] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.303465] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.303628] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.303648] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087]
[ 0.303656] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093]
[ 0.303664] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f]
[ 0.303672] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097]
[ 0.303680] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.303688] pci 0000:00:1f.2: reg 0x24: [mem 0xe163e000-0xe163e7ff]
[ 0.303730] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.303796] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.303815] pci 0000:00:1f.3: reg 0x10: [mem 0xe1641000-0xe16410ff 64bit]
[ 0.303834] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.303911] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[ 0.303934] pci 0000:00:1f.6: reg 0x10: [mem 0xe163d000-0xe163dfff 64bit]
[ 0.304140] pci 0000:01:00.0: [1180:e822] type 00 class 0x080501
[ 0.304182] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.304249] pci 0000:01:00.0: reg 0x10: [mem 0xe1400000-0xe14000ff]
[ 0.304559] pci 0000:01:00.0: supports D1 D2
[ 0.304560] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.304658] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:1c.0 (capable of 7.876 Gb/s with 8 GT/s x1 link)
[ 0.304791] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.304798] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff]
[ 0.304898] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[ 0.304975] pci 0000:02:00.0: reg 0x10: [mem 0xe1500000-0xe150ffff 64bit]
[ 0.305253] pci 0000:02:00.0: supports D1
[ 0.305254] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.305352] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:1c.1 (capable of 7.876 Gb/s with 8 GT/s x1 link)
[ 0.305474] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.305482] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff]
[ 0.305548] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.305554] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.305559] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff]
[ 0.305567] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[ 0.305716] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.305760] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.305801] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.305842] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.305882] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.305922] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.305962] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.306002] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.306627] ACPI: EC: interrupt unblocked
[ 0.306645] ACPI: EC: event unblocked
[ 0.306653] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.306657] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.306724] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.306724] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.306724] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.306724] vgaarb: loaded
[ 0.306724] pps_core: LinuxPPS API ver. 1 registered
[ 0.306724] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.306724] PTP clock support registered
[ 0.306724] EDAC MC: Ver: 3.0.0
[ 0.306724] PCI: Using ACPI for IRQ routing
[ 0.307553] PCI: pci_cache_line_size set to 64 bytes
[ 0.307631] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.307632] e820: reserve RAM buffer [mem 0xbff24000-0xbfffffff]
[ 0.307633] e820: reserve RAM buffer [mem 0x43d600000-0x43fffffff]
[ 0.307730] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.307730] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.310081] clocksource: Switched to clocksource tsc-early
[ 0.318774] VFS: Disk quotas dquot_6.6.0
[ 0.318795] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.318861] pnp: PnP ACPI init
[ 0.318989] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.318993] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.318996] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.318999] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.319001] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.319004] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.319007] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.319009] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.319012] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.319015] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.319021] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.319436] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.319442] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.319477] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.319481] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.319485] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.319502] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.319532] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.319553] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.319575] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.319592] pnp: PnP ACPI: found 7 devices
[ 0.325228] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.325272] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.325281] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff]
[ 0.325294] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.325301] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff]
[ 0.325314] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.325318] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.325325] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff]
[ 0.325332] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[ 0.325342] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.325343] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.325345] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.325346] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.325347] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 0.325348] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[ 0.325349] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.325350] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.325351] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.325353] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.325354] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.325355] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.325356] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.325357] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.325358] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.325360] pci_bus 0000:00: resource 19 [mem 0xc2a00001-0xefffffff window]
[ 0.325361] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 0.325362] pci_bus 0000:01: resource 1 [mem 0xe1400000-0xe14fffff]
[ 0.325363] pci_bus 0000:02: resource 1 [mem 0xe1500000-0xe15fffff]
[ 0.325365] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.325366] pci_bus 0000:03: resource 1 [mem 0xe0800000-0xe0ffffff]
[ 0.325367] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xe07fffff 64bit pref]
[ 0.325447] NET: Registered protocol family 2
[ 0.325574] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.325617] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.325790] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.325911] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.325941] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.325981] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.326054] NET: Registered protocol family 1
[ 0.326076] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.326550] PCI: CLS 64 bytes, default 64
[ 0.326584] Unpacking initramfs...
[ 0.652477] Freeing initrd memory: 22524K
[ 0.652523] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.652526] software IO TLB: mapped [mem 0xbbf24000-0xbff24000] (64MB)
[ 0.653091] Initialise system trusted keyrings
[ 0.653138] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 0.653166] zbud: loaded
[ 0.947355] Key type asymmetric registered
[ 0.947359] Asymmetric key parser 'x509' registered
[ 0.947374] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.947405] io scheduler noop registered
[ 0.947407] io scheduler deadline registered
[ 0.947423] io scheduler cfq registered (default)
[ 0.947425] io scheduler mq-deadline registered
[ 0.947427] io scheduler kyber registered
[ 0.947695] pcieport 0000:00:1c.0: Signaling PME with IRQ 26
[ 0.947908] pcieport 0000:00:1c.1: Signaling PME with IRQ 27
[ 0.948110] pcieport 0000:00:1c.2: Signaling PME with IRQ 28
[ 0.948138] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.948269] intel_idle: MWAIT substates: 0x21120
[ 0.948270] intel_idle: v0.4.1 model 0x3A
[ 0.948437] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.949002] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.949521] Linux agpgart interface v0.103
[ 0.954120] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 1.002488] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.002491] AMD IOMMUv2 functionality not available on this system
[ 1.002868] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.004607] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.004613] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.004774] mousedev: PS/2 mouse device common for all mice
[ 1.004808] rtc_cmos 00:03: RTC can wake from S4
[ 1.004971] rtc_cmos 00:03: registered as rtc0
[ 1.004986] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.004997] intel_pstate: Intel P-state driver initializing
[ 1.005190] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.005547] NET: Registered protocol family 10
[ 1.005912] Segment Routing with IPv6
[ 1.005947] mip6: Mobile IPv6
[ 1.005952] NET: Registered protocol family 17
[ 1.005959] mpls_gso: MPLS GSO support
[ 1.006399] microcode: sig=0x306a9, pf=0x10, revision=0x20
[ 1.006542] microcode: Microcode Update Driver: v2.2.
[ 1.006558] sched_clock: Marking stable (1005837198, 696104)->(1012099233, -5565931)
[ 1.006976] registered taskstats version 1
[ 1.006985] Loading compiled-in X.509 certificates
[ 1.007020] zswap: loaded using pool lzo/zbud
[ 1.007173] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.007209] ima: Allocated hash algorithm: sha256
[ 1.142884] rtc_cmos 00:03: setting system clock to 2018-11-26 12:30:55 UTC (1543235455)
[ 1.145117] Freeing unused kernel image memory: 1592K
[ 1.162103] Write protecting the kernel read-only data: 16384k
[ 1.162938] Freeing unused kernel image memory: 2016K
[ 1.163325] Freeing unused kernel image memory: 936K
[ 1.177680] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.177686] x86/mm: Checking user space page tables
[ 1.183594] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.183597] Run /init as init process
[ 1.267146] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.267214] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.267224] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.294645] ACPI: bus type USB registered
[ 1.294674] usbcore: registered new interface driver usbfs
[ 1.294689] usbcore: registered new interface driver hub
[ 1.294713] usbcore: registered new device driver usb
[ 1.295167] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.295172] ACPI: Thermal Zone [THM0] (49 C)
[ 1.296494] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.297956] ehci-pci: EHCI PCI platform driver
[ 1.298366] sdhci: Secure Digital Host Controller Interface driver
[ 1.298370] sdhci: Copyright(c) Pierre Ossman
[ 1.298432] SCSI subsystem initialized
[ 1.298793] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.298804] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.298820] ehci-pci 0000:00:1a.0: debug port 2
[ 1.299535] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e822] (rev 7)
[ 1.302733] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.303740] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.303893] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe163f000
[ 1.306466] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 1.307090] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[ 1.308186] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.308189] ACPI: Thermal Zone [THM1] (27 C)
[ 1.318082] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.318137] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
[ 1.318141] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.318143] usb usb1: Product: EHCI Host Controller
[ 1.318145] usb usb1: Manufacturer: Linux 4.20.0-rc4-00001-gb04a3905d8a6 ehci_hcd
[ 1.318147] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.318243] hub 1-0:1.0: USB hub found
[ 1.318250] hub 1-0:1.0: 3 ports detected
[ 1.318347] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.318358] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.319419] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930
[ 1.319427] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.319574] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
[ 1.319579] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.319582] usb usb2: Product: xHCI Host Controller
[ 1.319585] usb usb2: Manufacturer: Linux 4.20.0-rc4-00001-gb04a3905d8a6 xhci-hcd
[ 1.319589] usb usb2: SerialNumber: 0000:00:14.0
[ 1.319734] hub 2-0:1.0: USB hub found
[ 1.319745] hub 2-0:1.0: 4 ports detected
[ 1.319906] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.319912] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.319917] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.319919] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.319925] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.319939] ehci-pci 0000:00:1d.0: debug port 2
[ 1.319959] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.20
[ 1.319964] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.319968] usb usb3: Product: xHCI Host Controller
[ 1.319971] usb usb3: Manufacturer: Linux 4.20.0-rc4-00001-gb04a3905d8a6 xhci-hcd
[ 1.319974] usb usb3: SerialNumber: 0000:00:14.0
[ 1.320075] hub 3-0:1.0: USB hub found
[ 1.320088] hub 3-0:1.0: 4 ports detected
[ 1.322419] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.322423] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.322486] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.323691] libata version 3.00 loaded.
[ 1.323849] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.324347] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe1640000
[ 1.325015] ahci 0000:00:1f.2: version 3.0
[ 1.325174] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.335281] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[ 1.335289] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.335903] scsi host0: ahci
[ 1.336028] scsi host1: ahci
[ 1.336170] scsi host2: ahci
[ 1.338086] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.338123] scsi host3: ahci
[ 1.338260] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
[ 1.338265] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.338269] usb usb4: Product: EHCI Host Controller
[ 1.338272] usb usb4: Manufacturer: Linux 4.20.0-rc4-00001-gb04a3905d8a6 ehci_hcd
[ 1.338276] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.338405] hub 4-0:1.0: USB hub found
[ 1.338406] scsi host4: ahci
[ 1.338414] hub 4-0:1.0: 3 ports detected
[ 1.338864] scsi host5: ahci
[ 1.338918] ata1: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e100 irq 31
[ 1.338924] ata2: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e180 irq 31
[ 1.338929] ata3: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e200 irq 31
[ 1.338932] ata4: DUMMY
[ 1.338935] ata5: DUMMY
[ 1.338937] ata6: DUMMY
[ 1.468012] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.593063] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:5f:1b:41
[ 1.593067] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.593124] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 1.594153] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 1.652623] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.652998] ata1.00: supports DRM functions and may not be fully accessible
[ 1.653849] ata1.00: ATA-10: Crucial_CT525MX300SSD1, M0CR060, max UDMA/133
[ 1.653860] ata1.00: 1025610768 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.654101] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.656196] ata1.00: supports DRM functions and may not be fully accessible
[ 1.659028] ata1.00: configured for UDMA/133
[ 1.666101] tsc: Refined TSC clocksource calibration: 2893.426 MHz
[ 1.666119] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b500ca33a, max_idle_ns: 440795203665 ns
[ 1.666170] clocksource: Switched to clocksource tsc
[ 1.669569] scsi 0:0:0:0: Direct-Access ATA Crucial_CT525MX3 R060 PQ: 0 ANSI: 5
[ 1.674111] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.810471] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.810483] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.810729] hub 1-1:1.0: USB hub found
[ 1.810797] hub 1-1:1.0: 6 ports detected
[ 1.834476] usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.834488] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.834918] hub 4-1:1.0: USB hub found
[ 1.835062] hub 4-1:1.0: 8 ports detected
[ 1.915164] random: fast init done
[ 1.984537] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.077218] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[ 2.098107] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[ 2.107559] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[ 2.165941] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905
[ 2.165964] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 2.203304] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[ 2.209810] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12
[ 2.209822] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.209829] usb 1-1.4: Product: BCM20702A0
[ 2.209834] usb 1-1.4: Manufacturer: Broadcom Corp
[ 2.209840] usb 1-1.4: SerialNumber: 7CE9D3E5DCBD
[ 2.294102] usb 1-1.5: new full-speed USB device number 4 using ehci-pci
[ 2.300618] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.306192] ata1.00: Enabling discard_zeroes_data
[ 2.306329] sd 0:0:0:0: [sda] 1025610768 512-byte logical blocks: (525 GB/489 GiB)
[ 2.306348] sd 0:0:0:0: [sda] Write Protect is off
[ 2.306353] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.306378] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.306503] ata1.00: Enabling discard_zeroes_data
[ 2.307464] sda: sda1 sda2 < sda5 >
[ 2.307610] ata1.00: Enabling discard_zeroes_data
[ 2.307717] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.360670] PM: Image not found (code -22)
[ 2.403067] usb 1-1.5: New USB device found, idVendor=13d3, idProduct=3304, bcdDevice= 0.01
[ 2.403072] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.412206] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.482117] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
[ 2.524239] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 2.542346] systemd[1]: Detected architecture x86-64.
[ 2.544421] systemd[1]: Set hostname to <laptop>.
[ 2.597670] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2ea, bcdDevice= 5.18
[ 2.597680] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.597685] usb 1-1.6: Product: Integrated Camera
[ 2.597688] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.630762] systemd[1]: Created slice User and Session Slice.
[ 2.630936] systemd[1]: Listening on Syslog Socket.
[ 2.631039] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.631175] systemd[1]: Listening on Journal Audit Socket.
[ 2.631261] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 2.631652] systemd[1]: Created slice System Slice.
[ 2.632544] systemd[1]: Mounting Debug File System...
[ 2.739180] lp: driver loaded but no devices found
[ 2.753711] ppdev: user-space parallel port driver
[ 2.824276] Key type encrypted registered
[ 2.827877] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 2.835358] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 2.870396] systemd-journald[235]: Received request to flush runtime journal from PID 1
[ 2.936233] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0E:00/input/input4
[ 2.936255] ACPI: Sleep Button [SLPB]
[ 2.936308] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0D:00/input/input5
[ 2.936318] ACPI: Lid Switch [LID]
[ 2.936371] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 2.936381] ACPI: Power Button [PWRF]
[ 2.983431] ACPI: AC Adapter [AC] (on-line)
[ 2.994097] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 2.994237] battery: ACPI: Battery Slot [BAT1] (battery absent)
[ 2.999389] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.008426] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20181003/utaddress-213)
[ 3.008439] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.008445] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181003/utaddress-213)
[ 3.008452] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.008455] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181003/utaddress-213)
[ 3.008462] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.008465] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181003/utaddress-213)
[ 3.008472] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.008475] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 3.012644] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.038533] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
[ 3.039066] Non-volatile memory driver v1.3
[ 3.051965] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.055215] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 3.060045] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 3.060055] cfg80211: failed to load regulatory.db
[ 3.064674] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 3.064679] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 3.064680] thinkpad_acpi: ThinkPad BIOS CBET4000 4.8-2253-g717f4d5e14, EC G2HT35WW-3.22
[ 3.064682] thinkpad_acpi: Lenovo ThinkPad X230, model 232566G
[ 3.066713] thinkpad_acpi: radio switch found; radios are enabled
[ 3.066813] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 3.066876] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 3.066878] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 3.068213] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 3.074060] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 3.074164] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 3.075495] thinkpad_acpi: battery 1 registered (start 0, stop 0)
[ 3.075498] battery: new extension: ThinkPad Battery Extension
[ 3.075549] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
[ 3.096591] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 3.096598] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 3.096601] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 3.096603] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 3.102393] [drm] Replacing VGA console driver
[ 3.113338] Error: Driver 'pcspkr' is already registered, aborting...
[ 3.133249] cryptd: max_cpu_qlen set to 1000
[ 3.135405] media: Linux media interface: v0.10
[ 3.141429] videodev: Linux video capture interface: v2.00
[ 3.148066] AVX version of gcm_enc/dec engaged.
[ 3.148073] AES CTR mode by8 optimization enabled
[ 3.152858] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.152863] [drm] Driver supports precise vblank timestamp query.
[ 3.153106] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.156589] ath: phy0: Set BT/WLAN RX diversity capability
[ 3.209665] ath: phy0: ASPM enabled: 0x43
[ 3.209672] ath: EEPROM regdomain: 0x60
[ 3.209673] ath: EEPROM indicates we should expect a direct regpair map
[ 3.209674] ath: Country alpha2 being used: 00
[ 3.209675] ath: Regpair used: 0x60
[ 3.221970] Bluetooth: Core ver 2.22
[ 3.221984] NET: Registered protocol family 31
[ 3.221986] Bluetooth: HCI device and connection manager initialized
[ 3.221990] Bluetooth: HCI socket layer initialized
[ 3.221993] Bluetooth: L2CAP socket layer initialized
[ 3.221997] Bluetooth: SCO socket layer initialized
[ 3.231317] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea)
[ 3.232818] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 3.233105] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffb9b601fc0000, irq=17
[ 3.239714] [drm] Initialized i915 1.6.0 20180921 for 0000:00:02.0 on minor 0
[ 3.239854] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.240362] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 3.240367] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 3.240372] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 3.240376] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 3.240451] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input9
[ 3.240521] usbcore: registered new interface driver uvcvideo
[ 3.240524] USB Video Class driver (1.1.1)
[ 3.247225] Adding 16731132k swap on /dev/sda5. Priority:-2 extents:1 across:16731132k SSFS
[ 3.263475] usbcore: registered new interface driver btusb
[ 3.264652] acpi device:0d: registered as cooling_device5
[ 3.264718] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 3.265764] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 3.376162] Bluetooth: hci0: BCM: chip id 63
[ 3.377158] Bluetooth: hci0: BCM: features 0x07
[ 3.393164] Bluetooth: hci0: laptop
[ 3.394163] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 3.394180] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
[ 3.394183] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
[ 3.472747] fbcon: inteldrmfb (fb0) is primary device
[ 3.510286] usb 1-1.5: Direct firmware load for ath3k-1.fw failed with error -2
[ 3.510290] Bluetooth: Firmware file "ath3k-1.fw" not found
[ 3.510296] ath3k: probe of 1-1.5:1.0 failed with error -2
[ 3.510338] usbcore: registered new interface driver ath3k
[ 3.564171] iTCO_vendor_support: vendor-support=0
[ 3.604999] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 3.605001] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.605002] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 3.605003] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 3.605004] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 3.605005] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 3.605006] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 3.605007] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 3.619600] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 3.619860] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 3.619909] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 3.619961] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 3.620009] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 3.620057] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 3.620108] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 3.620155] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 3.647460] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 3.647508] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 3.647614] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.666891] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[ 3.723935] intel_rapl: Found RAPL domain package
[ 3.723936] intel_rapl: Found RAPL domain core
[ 3.723936] intel_rapl: Found RAPL domain uncore
[ 4.309696] Console: switching to colour frame buffer device 172x48
[ 4.341927] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 4.938488] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.939710] Bluetooth: BNEP filters: protocol multicast
[ 4.940877] Bluetooth: BNEP socket layer initialized
[ 4.994079] mei_me 0000:00:16.0: wait hw ready failed
[ 4.995127] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 4.996167] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 5.342103] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 5.602260] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 5.607152] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 5.623941] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 5.647980] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 5.831800] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 6.256454] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 6.260289] tun: Universal TUN/TAP device driver, 1.6
[ 6.322166] virbr0: port 1(virbr0-nic) entered blocking state
[ 6.322169] virbr0: port 1(virbr0-nic) entered disabled state
[ 6.322277] device virbr0-nic entered promiscuous mode
[ 6.469377] virbr0: port 1(virbr0-nic) entered blocking state
[ 6.469382] virbr0: port 1(virbr0-nic) entered listening state
[ 6.533045] virbr0: port 1(virbr0-nic) entered disabled state
[ 7.010183] mei_me 0000:00:16.0: wait hw ready failed
[ 7.010192] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 7.010209] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 9.026135] mei_me 0000:00:16.0: wait hw ready failed
[ 9.026147] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 9.026157] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
[ 9.026161] mei_me 0000:00:16.0: reset failed ret = -19
[ 9.026164] mei_me 0000:00:16.0: link layer initialization failed.
[ 9.026169] mei_me 0000:00:16.0: init hw failure.
[ 9.026332] mei_me 0000:00:16.0: initialization failed.
[ 11.694533] random: crng init done
[ 11.694545] random: 7 urandom warning(s) missed due to ratelimiting
[ 12.056912] Bridge firewalling registered
[ 12.085248] Initializing XFRM netlink socket
[ 12.180711] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[ 13.636292] Bluetooth: RFCOMM TTY layer initialized
[ 13.636303] Bluetooth: RFCOMM socket layer initialized
[ 13.636314] Bluetooth: RFCOMM ver 1.11
[ 19.444450] fuse init (API version 7.28)
[ 62.870138] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[ 62.870149] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 62.870481] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[ 62.870493] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 66.022363] PM: suspend entry (deep)
[ 66.022376] PM: Syncing filesystems ... done.
[ 66.025761] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 66.027664] OOM killer disabled.
[ 66.027666] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 66.028784] printk: Suspending console(s) (use no_console_suspend to debug)
[ 66.198257] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 66.201822] sd 0:0:0:0: [sda] Stopping disk
[ 66.394199] e1000e: EEE TX LPI TIMER: 00000011
[ 66.490591] ACPI: EC: interrupt blocked
[ 66.530612] ACPI: Preparing to enter system sleep state S3
[ 66.533503] ACPI: EC: event blocked
[ 66.533503] ACPI: EC: EC stopped
[ 66.533504] PM: Saving platform NVS memory
[ 66.533506] Disabling non-boot CPUs ...
[ 66.546600] IRQ 19: no longer affine to CPU1
[ 66.546606] IRQ 23: no longer affine to CPU1
[ 66.546612] IRQ 26: no longer affine to CPU1
[ 66.546616] IRQ 27: no longer affine to CPU1
[ 66.546621] IRQ 29: no longer affine to CPU1
[ 66.548216] smpboot: CPU 1 is now offline
[ 66.566583] IRQ 31: no longer affine to CPU2
[ 66.568204] smpboot: CPU 2 is now offline
[ 66.582515] IRQ 1: no longer affine to CPU3
[ 66.582521] IRQ 8: no longer affine to CPU3
[ 66.582524] IRQ 9: no longer affine to CPU3
[ 66.582528] IRQ 12: no longer affine to CPU3
[ 66.583556] smpboot: CPU 3 is now offline
[ 66.586210] ACPI: Low-level resume complete
[ 66.586247] ACPI: EC: EC started
[ 66.586248] PM: Restoring platform NVS memory
[ 66.586591] Enabling non-boot CPUs ...
[ 66.586993] x86: Booting SMP configuration:
[ 66.586994] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 66.589542] cache: parent cpu1 should not be sleeping
[ 66.589850] CPU1 is up
[ 66.590285] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 66.592758] cache: parent cpu2 should not be sleeping
[ 66.593112] CPU2 is up
[ 66.593541] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 66.596020] cache: parent cpu3 should not be sleeping
[ 66.596400] CPU3 is up
[ 66.599793] ACPI: Waking up from system sleep state S3
[ 66.602203] ACPI: EC: interrupt unblocked
[ 66.640329] sdhci-pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 66.663060] ACPI: EC: event unblocked
[ 66.665213] ath: phy0: ASPM enabled: 0x43
[ 66.665823] sd 0:0:0:0: [sda] Starting disk
[ 66.919782] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[ 66.978235] ata3: SATA link down (SStatus 0 SControl 300)
[ 66.978268] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 66.981330] ata1.00: supports DRM functions and may not be fully accessible
[ 66.986269] ata2: SATA link down (SStatus 0 SControl 300)
[ 67.050285] ata1.00: supports DRM functions and may not be fully accessible
[ 67.105663] ata1.00: configured for UDMA/133
[ 67.107855] usb 1-1.5: reset full-speed USB device number 4 using ehci-pci
[ 67.118849] ata1.00: Enabling discard_zeroes_data
[ 67.295831] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
[ 67.371042] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[ 67.402133] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[ 67.508469] OOM killer enabled.
[ 67.508473] Restarting tasks ... done.
[ 67.543859] video LNXVIDEO:00: Restoring backlight state
[ 67.587856] PM: suspend exit
[ 67.637509] Bluetooth: hci0: BCM: chip id 63
[ 67.638508] Bluetooth: hci0: BCM: features 0x07
[ 67.654514] Bluetooth: hci0: BCM20702A
[ 67.655517] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 67.655543] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
[ 67.655556] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
[ 67.759362] e1000e: enp0s25 NIC Link is Down
[ 67.760946] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 68.020143] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 68.023139] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 68.042558] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 68.066897] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 68.125987] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 73.031823] usb 1-1.2: new high-speed USB device number 6 using ehci-pci
[ 73.145398] usb 1-1.2: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00
[ 73.145404] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 73.145406] usb 1-1.2: Product: USB Flash Disk
[ 73.145409] usb 1-1.2: Manufacturer: General
[ 73.145411] usb 1-1.2: SerialNumber: 0351417070001918
[ 73.169065] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[ 73.169222] scsi host6: usb-storage 1-1.2:1.0
[ 73.169374] usbcore: registered new interface driver usb-storage
[ 73.171933] usbcore: registered new interface driver uas
[ 74.393108] scsi 6:0:0:0: Direct-Access General USB Flash Disk 1100 PQ: 0 ANSI: 6
[ 74.393703] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 74.394748] sd 6:0:0:0: [sdb] 31481856 512-byte logical blocks: (16.1 GB/15.0 GiB)
[ 74.395768] sd 6:0:0:0: [sdb] Write Protect is off
[ 74.395781] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 74.396854] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 74.403260] sdb: sdb1
[ 74.407112] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 74.647248] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 102.506323] usb 1-1.2: USB disconnect, device number 6
[ 140.879510] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[ 140.879519] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 140.879824] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[ 140.879838] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 144.018484] PM: suspend entry (deep)
[ 144.018488] PM: Syncing filesystems ... done.
[ 144.063447] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 144.066402] OOM killer disabled.
[ 144.066405] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 144.067681] printk: Suspending console(s) (use no_console_suspend to debug)
[ 144.236061] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 144.239597] sd 0:0:0:0: [sda] Stopping disk
[ 144.432027] e1000e: EEE TX LPI TIMER: 00000011
[ 144.528461] ACPI: EC: interrupt blocked
[ 144.568368] ACPI: Preparing to enter system sleep state S3
[ 144.571286] ACPI: EC: event blocked
[ 144.571286] ACPI: EC: EC stopped
[ 144.571287] PM: Saving platform NVS memory
[ 144.571289] Disabling non-boot CPUs ...
[ 144.584317] irq_migrate_all_off_this_cpu: 4 callbacks suppressed
[ 144.584319] IRQ 17: no longer affine to CPU1
[ 144.584325] IRQ 19: no longer affine to CPU1
[ 144.584329] IRQ 21: no longer affine to CPU1
[ 144.584335] IRQ 23: no longer affine to CPU1
[ 144.584341] IRQ 26: no longer affine to CPU1
[ 144.584345] IRQ 27: no longer affine to CPU1
[ 144.584350] IRQ 29: no longer affine to CPU1
[ 144.585365] smpboot: CPU 1 is now offline
[ 144.600279] IRQ 31: no longer affine to CPU2
[ 144.601304] smpboot: CPU 2 is now offline
[ 144.616152] IRQ 1: no longer affine to CPU3
[ 144.616158] IRQ 8: no longer affine to CPU3
[ 144.617198] smpboot: CPU 3 is now offline
[ 144.619774] ACPI: Low-level resume complete
[ 144.619812] ACPI: EC: EC started
[ 144.619813] PM: Restoring platform NVS memory
[ 144.620154] Enabling non-boot CPUs ...
[ 144.620572] x86: Booting SMP configuration:
[ 144.620573] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 144.623145] cache: parent cpu1 should not be sleeping
[ 144.623447] CPU1 is up
[ 144.623879] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 144.626380] cache: parent cpu2 should not be sleeping
[ 144.626738] CPU2 is up
[ 144.627176] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 144.629689] cache: parent cpu3 should not be sleeping
[ 144.630071] CPU3 is up
[ 144.633474] ACPI: Waking up from system sleep state S3
[ 144.635771] pci 0000:00:16.0: Refused to change power state, currently in D3
[ 144.635889] ACPI: EC: interrupt unblocked
[ 144.674059] sdhci-pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 144.675870] ACPI: EC: event unblocked
[ 144.678338] ath: phy0: ASPM enabled: 0x43
[ 144.678502] sd 0:0:0:0: [sda] Starting disk
[ 144.933456] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
[ 144.991908] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 144.991934] ata3: SATA link down (SStatus 0 SControl 300)
[ 144.991969] ata2: SATA link down (SStatus 0 SControl 300)
[ 144.993625] ata1.00: supports DRM functions and may not be fully accessible
[ 145.064334] ata1.00: supports DRM functions and may not be fully accessible
[ 145.121326] ata1.00: configured for UDMA/133
[ 145.125517] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[ 145.136453] ata1.00: Enabling discard_zeroes_data
[ 145.313512] usb 1-1.5: reset full-speed USB device number 4 using ehci-pci
[ 145.383548] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[ 145.414228] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[ 145.520424] OOM killer enabled.
[ 145.520428] Restarting tasks ... done.
[ 145.553418] video LNXVIDEO:00: Restoring backlight state
[ 145.589601] PM: suspend exit
[ 145.635583] Bluetooth: hci0: BCM: chip id 63
[ 145.636588] Bluetooth: hci0: BCM: features 0x07
[ 145.652647] Bluetooth: hci0: BCM20702A
[ 145.653608] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 145.653634] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
[ 145.653640] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
[ 145.760959] e1000e: enp0s25 NIC Link is Down
[ 145.762668] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 146.021809] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 146.024527] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 146.043943] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 146.068270] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 146.129975] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 147.170682] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 147.234227] wlp2s0: authenticate with 2c:59:8a:70:7a:57
[ 147.248521] wlp2s0: send auth to 2c:59:8a:70:7a:57 (try 1/3)
[ 147.253226] wlp2s0: authenticated
[ 147.253405] wlp2s0: associate with 2c:59:8a:70:7a:57 (try 1/3)
[ 147.315352] wlp2s0: RX AssocResp from 2c:59:8a:70:7a:57 (capab=0x431 status=0 aid=1)
[ 147.315584] wlp2s0: associated
[ 147.342441] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 264.805655] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[ 264.805667] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 264.805966] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[ 264.805981] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 264.856316] wlp2s0: deauthenticating from 2c:59:8a:70:7a:57 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 265.094810] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 268.021181] PM: suspend entry (deep)
[ 268.021185] PM: Syncing filesystems ... done.
[ 268.074134] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 268.076350] OOM killer disabled.
[ 268.076351] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 268.077569] printk: Suspending console(s) (use no_console_suspend to debug)
[ 268.220927] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 268.224420] sd 0:0:0:0: [sda] Stopping disk
[ 268.420549] e1000e: EEE TX LPI TIMER: 00000011
[ 268.513380] ACPI: EC: interrupt blocked
[ 268.553306] ACPI: Preparing to enter system sleep state S3
[ 268.556365] ACPI: EC: event blocked
[ 268.556366] ACPI: EC: EC stopped
[ 268.556367] PM: Saving platform NVS memory
[ 268.556368] Disabling non-boot CPUs ...
[ 268.569397] irq_migrate_all_off_this_cpu: 4 callbacks suppressed
[ 268.569399] IRQ 19: no longer affine to CPU1
[ 268.569405] IRQ 23: no longer affine to CPU1
[ 268.569411] IRQ 26: no longer affine to CPU1
[ 268.569416] IRQ 27: no longer affine to CPU1
[ 268.569421] IRQ 29: no longer affine to CPU1
[ 268.569427] IRQ 33: no longer affine to CPU1
[ 268.570441] smpboot: CPU 1 is now offline
[ 268.585335] IRQ 31: no longer affine to CPU2
[ 268.586362] smpboot: CPU 2 is now offline
[ 268.601215] IRQ 1: no longer affine to CPU3
[ 268.601221] IRQ 8: no longer affine to CPU3
[ 268.601225] IRQ 9: no longer affine to CPU3
[ 268.602265] smpboot: CPU 3 is now offline
[ 268.604887] ACPI: Low-level resume complete
[ 268.604926] ACPI: EC: EC started
[ 268.604927] PM: Restoring platform NVS memory
[ 268.605263] Enabling non-boot CPUs ...
[ 268.605688] x86: Booting SMP configuration:
[ 268.605689] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 268.608262] cache: parent cpu1 should not be sleeping
[ 268.608577] CPU1 is up
[ 268.609037] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 268.611540] cache: parent cpu2 should not be sleeping
[ 268.611900] CPU2 is up
[ 268.612353] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 268.614875] cache: parent cpu3 should not be sleeping
[ 268.615267] CPU3 is up
[ 268.618668] ACPI: Waking up from system sleep state S3
[ 268.620958] pci 0000:00:16.0: Refused to change power state, currently in D3
[ 268.621058] ACPI: EC: interrupt unblocked
[ 268.659102] sdhci-pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 268.660877] ACPI: EC: event unblocked
[ 268.662184] ath: phy0: ASPM enabled: 0x43
[ 268.666576] sd 0:0:0:0: [sda] Starting disk
[ 268.922533] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[ 268.976982] ata2: SATA link down (SStatus 0 SControl 300)
[ 268.977014] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 268.980999] ata3: SATA link down (SStatus 0 SControl 300)
[ 268.984597] ata1.00: supports DRM functions and may not be fully accessible
[ 269.053424] ata1.00: supports DRM functions and may not be fully accessible
[ 269.109266] ata1.00: configured for UDMA/133
[ 269.110542] usb 1-1.5: reset full-speed USB device number 4 using ehci-pci
[ 269.122509] ata1.00: Enabling discard_zeroes_data
[ 269.298559] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
[ 269.366018] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[ 269.396752] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[ 269.502901] OOM killer enabled.
[ 269.502905] Restarting tasks ... done.
[ 269.536044] video LNXVIDEO:00: Restoring backlight state
[ 269.582693] PM: suspend exit
[ 269.620485] Bluetooth: hci0: BCM: chip id 63
[ 269.621530] Bluetooth: hci0: BCM: features 0x07
[ 269.637618] Bluetooth: hci0: BCM20702A
[ 269.638569] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 269.638612] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
[ 269.638622] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
[ 269.754081] e1000e: enp0s25 NIC Link is Down
[ 269.755802] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 270.018755] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 270.021224] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 270.040662] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 270.065513] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 270.117895] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 294.048093] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 324.059698] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 324.114848] wlp2s0: authenticate with 2c:59:8a:70:7a:57
[ 324.129368] wlp2s0: send auth to 2c:59:8a:70:7a:57 (try 1/3)
[ 324.131874] wlp2s0: authenticated
[ 324.134485] wlp2s0: associate with 2c:59:8a:70:7a:57 (try 1/3)
[ 324.183082] wlp2s0: RX AssocResp from 2c:59:8a:70:7a:57 (capab=0x431 status=0 aid=1)
[ 324.183311] wlp2s0: associated
[ 324.191022] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 347.715529] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[ 347.715540] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 347.715838] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[ 347.715855] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 347.757364] wlp2s0: deauthenticating from 2c:59:8a:70:7a:57 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 347.792750] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 350.997206] PM: suspend entry (deep)
[ 350.997210] PM: Syncing filesystems ... done.
[ 351.009855] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 351.011922] OOM killer disabled.
[ 351.011923] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 351.013092] printk: Suspending console(s) (use no_console_suspend to debug)
[ 351.155049] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 351.158582] sd 0:0:0:0: [sda] Stopping disk
[ 351.358384] e1000e: EEE TX LPI TIMER: 00000011
[ 351.455336] ACPI: EC: interrupt blocked
[ 351.495151] ACPI: Preparing to enter system sleep state S3
[ 351.498136] ACPI: EC: event blocked
[ 351.498136] ACPI: EC: EC stopped
[ 351.498137] PM: Saving platform NVS memory
[ 351.498139] Disabling non-boot CPUs ...
[ 351.511112] irq_migrate_all_off_this_cpu: 4 callbacks suppressed
[ 351.511115] IRQ 17: no longer affine to CPU1
[ 351.511122] IRQ 19: no longer affine to CPU1
[ 351.511127] IRQ 23: no longer affine to CPU1
[ 351.511134] IRQ 26: no longer affine to CPU1
[ 351.511138] IRQ 27: no longer affine to CPU1
[ 351.511144] IRQ 29: no longer affine to CPU1
[ 351.512160] smpboot: CPU 1 is now offline
[ 351.527075] IRQ 31: no longer affine to CPU2
[ 351.528096] smpboot: CPU 2 is now offline
[ 351.542945] IRQ 1: no longer affine to CPU3
[ 351.542950] IRQ 8: no longer affine to CPU3
[ 351.542954] IRQ 9: no longer affine to CPU3
[ 351.543996] smpboot: CPU 3 is now offline
[ 351.546740] ACPI: Low-level resume complete
[ 351.546778] ACPI: EC: EC started
[ 351.546779] PM: Restoring platform NVS memory
[ 351.547115] Enabling non-boot CPUs ...
[ 351.547553] x86: Booting SMP configuration:
[ 351.547554] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 351.550125] cache: parent cpu1 should not be sleeping
[ 351.550438] CPU1 is up
[ 351.550900] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 351.553407] cache: parent cpu2 should not be sleeping
[ 351.553762] CPU2 is up
[ 351.554227] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 351.556739] cache: parent cpu3 should not be sleeping
[ 351.557118] CPU3 is up
[ 351.560523] ACPI: Waking up from system sleep state S3
[ 351.562855] pci 0000:00:16.0: Refused to change power state, currently in D3
[ 351.562970] ACPI: EC: interrupt unblocked
[ 351.604382] sdhci-pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 351.606251] ACPI: EC: event unblocked
[ 351.607562] ath: phy0: ASPM enabled: 0x43
[ 351.607940] sd 0:0:0:0: [sda] Starting disk
[ 351.864080] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
[ 351.922439] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 351.922600] ata2: SATA link down (SStatus 0 SControl 300)
[ 351.922629] ata3: SATA link down (SStatus 0 SControl 300)
[ 351.926397] ata1.00: supports DRM functions and may not be fully accessible
[ 351.995755] ata1.00: supports DRM functions and may not be fully accessible
[ 352.051181] ata1.00: configured for UDMA/133
[ 352.055959] usb 1-1.5: reset full-speed USB device number 4 using ehci-pci
[ 352.065424] ata1.00: Enabling discard_zeroes_data
[ 352.243862] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[ 352.311886] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[ 352.343127] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[ 352.449801] OOM killer enabled.
[ 352.449805] Restarting tasks ... done.
[ 352.477599] video LNXVIDEO:00: Restoring backlight state
[ 352.527850] PM: suspend exit
[ 352.569935] Bluetooth: hci0: BCM: chip id 63
[ 352.570881] Bluetooth: hci0: BCM: features 0x07
[ 352.586917] Bluetooth: hci0: BCM20702A
[ 352.590928] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 352.590954] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
[ 352.590959] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
[ 352.703058] e1000e: enp0s25 NIC Link is Down
[ 352.704889] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 352.963642] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 352.965980] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 352.985500] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 353.011106] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 353.078529] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 354.218910] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 354.265581] wlp2s0: authenticate with 2c:59:8a:70:7a:57
[ 354.280011] wlp2s0: send auth to 2c:59:8a:70:7a:57 (try 1/3)
[ 354.282721] wlp2s0: authenticated
[ 354.286595] wlp2s0: associate with 2c:59:8a:70:7a:57 (try 1/3)
[ 354.336956] wlp2s0: RX AssocResp from 2c:59:8a:70:7a:57 (capab=0x431 status=0 aid=1)
[ 354.337174] wlp2s0: associated
[ 354.342646] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready