[    0.000000] Linux version 4.18.0-rc8-00001-ge7419c4da6fb (martin@laptop) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #14 SMP Mon Aug 6 14:16:16 CEST 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-rc8-00001-ge7419c4da6fb root=UUID=5e6b38be-bc16-475b-8de3-1e5acbc60d52 ro iomem=relaxed
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff0dfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bff0e000-0x00000000c29fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043d5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 2325QL5/2325QL5, BIOS CBET4000 4.8-1053-g4591bb6f7b-dirty 08/06/2018
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x43d600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0C0000000 mask FF0000000 uncachable
[    0.000000]   1 base 0D0000000 mask FF0000000 write-combining
[    0.000000]   2 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] last_pfn = 0xbff0e max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [(____ptrval____)] 99000 size 24576
[    0.000000] BRK [0x19d044000, 0x19d044fff] PGTABLE
[    0.000000] BRK [0x19d045000, 0x19d045fff] PGTABLE
[    0.000000] BRK [0x19d046000, 0x19d046fff] PGTABLE
[    0.000000] BRK [0x19d047000, 0x19d047fff] PGTABLE
[    0.000000] BRK [0x19d048000, 0x19d048fff] PGTABLE
[    0.000000] BRK [0x19d049000, 0x19d049fff] PGTABLE
[    0.000000] BRK [0x19d04a000, 0x19d04afff] PGTABLE
[    0.000000] BRK [0x19d04b000, 0x19d04bfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35451000-0x36a1ffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6810 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000BFF320E0 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000BFF35B10 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000BFF32280 00388C (v02 COREv4 COREBOOT 20110725 INTL 20180531)
[    0.000000] ACPI: FACS 0x00000000BFF32240 000040
[    0.000000] ACPI: FACS 0x00000000BFF32240 000040
[    0.000000] ACPI: SSDT 0x00000000BFF35C10 0019AE (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: MCFG 0x00000000BFF375C0 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: TCPA 0x00000000BFF37600 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x00000000BFF37640 00006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DMAR 0x00000000BFF376B0 0000A8 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000BFF39760 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000043d5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x43d5ef000-0x43d5f3fff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000043d5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bff0dfff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000043d5fffff]
[    0.000000] Reserved but unavailable: 340 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043d5fffff]
[    0.000000] On node 0 totalpages: 4183212
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12221 pages used for memmap
[    0.000000]   DMA32 zone: 782094 pages, LIFO batch:31
[    0.000000]   Normal zone: 53080 pages used for memmap
[    0.000000]   Normal zone: 3397120 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at [mem 0xc0a00000-0xc29fffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbff0e000-0xc29fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc2a00000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[    0.000000] [mem 0xc2a00000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x94/0x4d3 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 44 pages/cpu @(____ptrval____) s142488 r8192 d29544 u524288
[    0.000000] pcpu-alloc: s142488 r8192 d29544 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4117826
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-rc8-00001-ge7419c4da6fb root=UUID=5e6b38be-bc16-475b-8de3-1e5acbc60d52 ro iomem=relaxed
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16358640K/16732848K available (10252K kernel code, 1207K rwdata, 3180K rodata, 1564K init, 660K bss, 374208K reserved, 0K cma-reserved)
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 30825 entries in 121 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180531
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] DMAR: Host address width 36
[    0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.000000] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.000000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.000000] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.000000] x2apic enabled
[    0.000000] Switched APIC routing to cluster x2apic.
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 2893.348 MHz processor
[    0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b4b6e5e55, max_idle_ns: 440795245218 ns
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.69 BogoMIPS (lpj=11573392)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor disabled by boot time parameter
[    0.029860] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.031133] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.031259] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.031354] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.031613] CPU: Physical Processor ID: 0
[    0.031670] CPU: Processor Core ID: 0
[    0.031732] mce: CPU supports 7 MCE banks
[    0.031795] CPU0: Thermal monitoring enabled (TM1)
[    0.031858] process: using mwait in idle threads
[    0.031918] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.031976] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.032005] Spectre V2 : Mitigation: Full generic retpoline
[    0.032063] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.032134] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.032195] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.032346] Freeing SMP alternatives memory: 28K
[    0.033337] TSC deadline timer enabled
[    0.033340] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.033501] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.033594] ... version:                3
[    0.033651] ... bit width:              48
[    0.033708] ... generic registers:      4
[    0.033764] ... value mask:             0000ffffffffffff
[    0.033821] ... max period:             00007fffffffffff
[    0.033880] ... fixed-purpose events:   3
[    0.033936] ... event mask:             000000070000000f
[    0.034025] Hierarchical SRCU implementation.
[    0.034594] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.034670] smp: Bringing up secondary CPUs ...
[    0.034809] x86: Booting SMP configuration:
[    0.034866] .... node  #0, CPUs:      #1 #2 #3
[    0.040058] smp: Brought up 1 node, 4 CPUs
[    0.040121] smpboot: Max logical packages: 1
[    0.040179] smpboot: Total of 4 processors activated (23146.78 BogoMIPS)
[    0.043258] devtmpfs: initialized
[    0.043258] x86/mm: Memory block size: 128MB
[    0.045142] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.045142] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.045142] pinctrl core: initialized pinctrl subsystem
[    0.045142] NET: Registered protocol family 16
[    0.045142] audit: initializing netlink subsys (disabled)
[    0.045142] audit: type=2000 audit(1533565517.044:1): state=initialized audit_enabled=0 res=1
[    0.045142] cpuidle: using governor ladder
[    0.045142] cpuidle: using governor menu
[    0.045142] ACPI: bus type PCI registered
[    0.045142] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.045142] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.045142] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.045142] PCI: Using configuration type 1 for base access
[    0.045142] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.045142] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.045142] ACPI: Added _OSI(Module Device)
[    0.045142] ACPI: Added _OSI(Processor Device)
[    0.045142] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.048004] ACPI: Added _OSI(Processor Aggregator Device)
[    0.048064] ACPI: Added _OSI(Linux-Dell-Video)
[    0.050605] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.051956] ACPI: EC: EC started
[    0.052004] ACPI: EC: interrupt blocked
[    0.052337] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.052396] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.052467] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.052538] ACPI: Interpreter enabled
[    0.052608] ACPI: (supports S0 S3 S4 S5)
[    0.052665] ACPI: Using IOAPIC for interrupt routing
[    0.052737] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.052916] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.056323] ACPI: Power Resource [FPWR] (off)
[    0.056658] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.056722] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.056836] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability LTR]
[    0.056914] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.057181] PCI host bridge to bus 0000:00
[    0.057240] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.057300] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.057360] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.057431] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.057502] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.057573] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.057643] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.057715] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.057786] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.057856] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.057926] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.057997] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.058068] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.058138] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.058212] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.058212] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.058212] pci_bus 0000:00: root bus resource [mem 0xc2a00001-0xefffffff window]
[    0.058212] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.058212] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.058212] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.058212] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.058212] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit]
[    0.058212] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.058212] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.058212] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[    0.058212] pci 0000:00:04.0: reg 0x10: [mem 0xe1630000-0xe1637fff 64bit]
[    0.058212] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.058212] pci 0000:00:14.0: reg 0x10: [mem 0xe1620000-0xe162ffff 64bit]
[    0.058212] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.058212] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.058212] pci 0000:00:16.0: reg 0x10: [mem 0xe1642000-0xe164200f 64bit]
[    0.058212] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.058212] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.058212] pci 0000:00:19.0: reg 0x10: [mem 0xe1600000-0xe161ffff]
[    0.058212] pci 0000:00:19.0: reg 0x14: [mem 0xe163c000-0xe163cfff]
[    0.058212] pci 0000:00:19.0: reg 0x18: [io  0x3040-0x305f]
[    0.058212] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.058212] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.058212] pci 0000:00:1a.0: reg 0x10: [mem 0xe163f000-0xe163f3ff]
[    0.058212] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.058212] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.058212] pci 0000:00:1b.0: reg 0x10: [mem 0xe1638000-0xe163bfff 64bit]
[    0.058212] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.058212] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.058212] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.058212] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.058231] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.058327] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.058467] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.058563] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.058585] pci 0000:00:1d.0: reg 0x10: [mem 0xe1640000-0xe16403ff]
[    0.058665] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.058737] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[    0.058901] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.058920] pci 0000:00:1f.2: reg 0x10: [io  0x3080-0x3087]
[    0.058928] pci 0000:00:1f.2: reg 0x14: [io  0x3090-0x3093]
[    0.058936] pci 0000:00:1f.2: reg 0x18: [io  0x3088-0x308f]
[    0.058944] pci 0000:00:1f.2: reg 0x1c: [io  0x3094-0x3097]
[    0.058952] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.058960] pci 0000:00:1f.2: reg 0x24: [mem 0xe163e000-0xe163e7ff]
[    0.059003] pci 0000:00:1f.2: PME# supported from D3hot
[    0.059067] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.059086] pci 0000:00:1f.3: reg 0x10: [mem 0xe1641000-0xe16410ff 64bit]
[    0.059106] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.059185] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[    0.059208] pci 0000:00:1f.6: reg 0x10: [mem 0xe163d000-0xe163dfff 64bit]
[    0.059412] pci 0000:01:00.0: [1180:e822] type 00 class 0x080501
[    0.059452] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[    0.059567] pci 0000:01:00.0: reg 0x10: [mem 0xe1400000-0xe14000ff]
[    0.059873] pci 0000:01:00.0: supports D1 D2
[    0.059874] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.060078] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.060143] pci 0000:00:1c.0:   bridge window [mem 0xe1400000-0xe14fffff]
[    0.060236] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[    0.060297] pci 0000:02:00.0: reg 0x10: [mem 0xe1500000-0xe150ffff 64bit]
[    0.060503] pci 0000:02:00.0: supports D1
[    0.060504] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.060661] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.060727] pci 0000:00:1c.1:   bridge window [mem 0xe1500000-0xe15fffff]
[    0.060810] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.060872] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.060877] pci 0000:00:1c.2:   bridge window [mem 0xe0800000-0xe0ffffff]
[    0.060885] pci 0000:00:1c.2:   bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[    0.061036] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.061139] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.061241] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.061342] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.061443] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.061544] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.061645] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.061745] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.064006] ACPI: EC: interrupt unblocked
[    0.064006] ACPI: EC: event unblocked
[    0.064006] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.064006] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.064009] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.064066] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.064138] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.064197] vgaarb: loaded
[    0.064284] pps_core: LinuxPPS API ver. 1 registered
[    0.064342] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.064416] PTP clock support registered
[    0.064477] EDAC MC: Ver: 3.0.0
[    0.064620] PCI: Using ACPI for IRQ routing
[    0.065009] PCI: pci_cache_line_size set to 64 bytes
[    0.065092] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.065094] e820: reserve RAM buffer [mem 0xbff0e000-0xbfffffff]
[    0.065095] e820: reserve RAM buffer [mem 0x43d600000-0x43fffffff]
[    0.065188] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.065188] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.068005] clocksource: Switched to clocksource tsc-early
[    0.076327] VFS: Disk quotas dquot_6.6.0
[    0.076401] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.076512] pnp: PnP ACPI init
[    0.076700] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.076762] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.076825] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.076886] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.076948] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.077009] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.077072] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.077133] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.077193] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[    0.077254] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[    0.077319] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.077724] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.077789] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.077824] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.077884] system 00:02: [io  0x0480-0x04bf] has been reserved
[    0.077946] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.077963] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.077990] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.078012] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.078034] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[    0.078050] pnp: PnP ACPI: found 7 devices
[    0.083843] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.083957] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.084024] pci 0000:00:1c.0:   bridge window [mem 0xe1400000-0xe14fffff]
[    0.084096] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.084160] pci 0000:00:1c.1:   bridge window [mem 0xe1500000-0xe15fffff]
[    0.084231] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.084290] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.084355] pci 0000:00:1c.2:   bridge window [mem 0xe0800000-0xe0ffffff]
[    0.084420] pci 0000:00:1c.2:   bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[    0.084499] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.084501] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.084502] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.084503] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.084504] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.084506] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.084507] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.084508] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.084509] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.084510] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.084512] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.084513] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.084514] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.084515] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.084516] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.084517] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.084519] pci_bus 0000:00: resource 20 [mem 0xc2a00001-0xefffffff window]
[    0.084520] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[    0.084521] pci_bus 0000:01: resource 1 [mem 0xe1400000-0xe14fffff]
[    0.084523] pci_bus 0000:02: resource 1 [mem 0xe1500000-0xe15fffff]
[    0.084524] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.084525] pci_bus 0000:03: resource 1 [mem 0xe0800000-0xe0ffffff]
[    0.084526] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xe07fffff 64bit pref]
[    0.084609] NET: Registered protocol family 2
[    0.084790] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[    0.084903] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.085144] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.085323] TCP: Hash tables configured (established 131072 bind 65536)
[    0.085414] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.085511] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.085636] NET: Registered protocol family 1
[    0.085705] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.086255] PCI: CLS 64 bytes, default 64
[    0.086289] Unpacking initramfs...
[    0.413567] Freeing initrd memory: 22332K
[    0.413714] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.413776] software IO TLB [mem 0xbbf0e000-0xbff0e000] (64MB) mapped at [(____ptrval____)-(____ptrval____)]
[    0.414406] Initialise system trusted keyrings
[    0.414514] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    0.414598] zbud: loaded
[    0.414853] pstore: using deflate compression
[    0.701751] Key type asymmetric registered
[    0.701810] Asymmetric key parser 'x509' registered
[    0.701884] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.701979] io scheduler noop registered
[    0.702035] io scheduler deadline registered
[    0.702104] io scheduler cfq registered (default)
[    0.702163] io scheduler mq-deadline registered
[    0.702220] io scheduler kyber registered
[    0.702965] pcieport 0000:00:1c.0: Signaling PME with IRQ 26
[    0.703047] pcieport 0000:00:1c.1: Signaling PME with IRQ 27
[    0.703126] pcieport 0000:00:1c.2: Signaling PME with IRQ 28
[    0.703206] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.703325] intel_idle: MWAIT substates: 0x21120
[    0.703326] intel_idle: v0.4.1 model 0x3A
[    0.703457] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.703902] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.704304] Linux agpgart interface v0.103
[    0.708043] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[    0.752313] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.752374] AMD IOMMUv2 functionality not available on this system
[    0.752794] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.754703] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.754765] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.755081] mousedev: PS/2 mouse device common for all mice
[    0.755185] rtc_cmos 00:03: RTC can wake from S4
[    0.755400] rtc_cmos 00:03: registered as rtc0
[    0.755471] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.755560] intel_pstate: Intel P-state driver initializing
[    0.755830] ledtrig-cpu: registered to indicate activity on CPUs
[    0.756309] NET: Registered protocol family 10
[    0.756479] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.757090] Segment Routing with IPv6
[    0.757187] mip6: Mobile IPv6
[    0.757253] NET: Registered protocol family 17
[    0.757324] mpls_gso: MPLS GSO support
[    0.757766] microcode: sig=0x306a9, pf=0x10, revision=0x20
[    0.757966] microcode: Microcode Update Driver: v2.2.
[    0.757984] sched_clock: Marking stable (757958562, 0)->(735790198, 22168364)
[    0.760105] registered taskstats version 1
[    0.760173] Loading compiled-in X.509 certificates
[    0.760268] zswap: loaded using pool lzo/zbud
[    0.772110] ima: Allocated hash algorithm: sha256
[    0.880722] rtc_cmos 00:03: setting system clock to 2018-08-06 14:25:17 UTC (1533565517)
[    0.884276] Freeing unused kernel memory: 1564K
[    0.896049] Write protecting the kernel read-only data: 16384k
[    0.896795] Freeing unused kernel memory: 2008K
[    0.899690] Freeing unused kernel memory: 916K
[    0.913572] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.913629] x86/mm: Checking user space page tables
[    0.919480] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.988488] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.988639] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.988713] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.017344] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.017408] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.017546] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.019524] ACPI: bus type USB registered
[    1.019603] usbcore: registered new interface driver usbfs
[    1.019671] usbcore: registered new interface driver hub
[    1.019805] usbcore: registered new device driver usb
[    1.020631] thermal LNXTHERM:00: registered as thermal_zone0
[    1.020691] ACPI: Thermal Zone [THM0] (53 C)
[    1.021822] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.021876] SCSI subsystem initialized
[    1.023312] thermal LNXTHERM:01: registered as thermal_zone1
[    1.023326] ehci-pci: EHCI PCI platform driver
[    1.023373] ACPI: Thermal Zone [THM1] (27 C)
[    1.028096] libata version 3.00 loaded.
[    1.029153] ahci 0000:00:1f.2: version 3.0
[    1.029876] sdhci: Secure Digital Host Controller Interface driver
[    1.029939] sdhci: Copyright(c) Pierre Ossman
[    1.030777] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e822] (rev 7)
[    1.034179] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.034247] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.034302] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.034376] ehci-pci 0000:00:1a.0: debug port 2
[    1.034377] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.035629] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[    1.038625] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.038868] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe163f000
[    1.039166] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[    1.048113] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[    1.048189] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    1.048838] scsi host0: ahci
[    1.049006] scsi host1: ahci
[    1.049753] scsi host2: ahci
[    1.049937] scsi host3: ahci
[    1.050059] scsi host4: ahci
[    1.050174] scsi host5: ahci
[    1.050257] ata1: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e100 irq 30
[    1.050327] ata2: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e180 irq 30
[    1.050397] ata3: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e200 irq 30
[    1.050466] ata4: DUMMY
[    1.050519] ata5: DUMMY
[    1.050573] ata6: DUMMY
[    1.052016] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.052176] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    1.052248] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.052315] usb usb1: Product: EHCI Host Controller
[    1.052372] usb usb1: Manufacturer: Linux 4.18.0-rc8-00001-ge7419c4da6fb ehci_hcd
[    1.052440] usb usb1: SerialNumber: 0000:00:1a.0
[    1.052602] hub 1-0:1.0: USB hub found
[    1.052666] hub 1-0:1.0: 3 ports detected
[    1.052940] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.053003] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.054146] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930
[    1.054225] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.054368] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    1.054442] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.054514] usb usb2: Product: xHCI Host Controller
[    1.054574] usb usb2: Manufacturer: Linux 4.18.0-rc8-00001-ge7419c4da6fb xhci-hcd
[    1.054646] usb usb2: SerialNumber: 0000:00:14.0
[    1.054843] hub 2-0:1.0: USB hub found
[    1.054912] hub 2-0:1.0: 4 ports detected
[    1.055137] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.055143] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.055212] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.055272] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    1.055338] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    1.055434] ehci-pci 0000:00:1d.0: debug port 2
[    1.055566] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[    1.055680] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.055792] usb usb3: Product: xHCI Host Controller
[    1.055881] usb usb3: Manufacturer: Linux 4.18.0-rc8-00001-ge7419c4da6fb xhci-hcd
[    1.055993] usb usb3: SerialNumber: 0000:00:14.0
[    1.056271] hub 3-0:1.0: USB hub found
[    1.056368] hub 3-0:1.0: 4 ports detected
[    1.059437] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.059449] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe1640000
[    1.076021] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.076165] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    1.076247] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.076326] usb usb4: Product: EHCI Host Controller
[    1.076390] usb usb4: Manufacturer: Linux 4.18.0-rc8-00001-ge7419c4da6fb ehci_hcd
[    1.076469] usb usb4: SerialNumber: 0000:00:1d.0
[    1.076722] hub 4-0:1.0: USB hub found
[    1.076790] hub 4-0:1.0: 3 ports detected
[    1.164846] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    1.290278] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:7b:c3:aa
[    1.290351] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.290458] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[    1.291141] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    1.366556] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.366883] ata1.00: supports DRM functions and may not be fully accessible
[    1.367787] ata1.00: ATA-10: Crucial_CT525MX300SSD1,  M0CR060, max UDMA/133
[    1.367865] ata1.00: 1025610768 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.370237] ata1.00: supports DRM functions and may not be fully accessible
[    1.373124] ata1.00: configured for UDMA/133
[    1.383729] scsi 0:0:0:0: Direct-Access     ATA      Crucial_CT525MX3 R060 PQ: 0 ANSI: 5
[    1.392037] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.412039] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    1.440039] tsc: Refined TSC clocksource calibration: 2893.427 MHz
[    1.440124] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b502105a9, max_idle_ns: 440795323709 ns
[    1.440266] clocksource: Switched to clocksource tsc
[    1.548440] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    1.548534] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.548999] hub 1-1:1.0: USB hub found
[    1.549130] hub 1-1:1.0: 6 ports detected
[    1.568439] usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    1.568534] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.568976] hub 4-1:1.0: USB hub found
[    1.569132] hub 4-1:1.0: 8 ports detected
[    1.698559] ata2: SATA link down (SStatus 0 SControl 300)
[    1.727156] random: fast init done
[    1.774882] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[    1.805809] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[    1.836051] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[    1.866163] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905
[    1.866276] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    1.904434] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    1.948165] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12
[    1.948258] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.948346] usb 1-1.4: Product: BCM20702A0
[    1.948413] usb 1-1.4: Manufacturer: Broadcom Corp
[    1.948482] usb 1-1.4: SerialNumber: 9C2A70849024
[    2.014513] ata3: SATA link down (SStatus 0 SControl 300)
[    2.020005] ata1.00: Enabling discard_zeroes_data
[    2.020209] sd 0:0:0:0: [sda] 1025610768 512-byte logical blocks: (525 GB/489 GiB)
[    2.020294] sd 0:0:0:0: [sda] Write Protect is off
[    2.020353] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.020370] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.021739] ata1.00: Enabling discard_zeroes_data
[    2.022692]  sda: sda1 sda2 < sda5 >
[    2.022903] ata1.00: Enabling discard_zeroes_data
[    2.023213] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.032018] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[    2.078897] PM: Image not found (code -22)
[    2.147612] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2ea, bcdDevice= 5.18
[    2.147682] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.147746] usb 1-1.6: Product: Integrated Camera
[    2.147801] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[    2.148892] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.255874] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    2.276407] systemd[1]: Detected architecture x86-64.
[    2.279151] systemd[1]: Set hostname to <laptop>.
[    2.357295] systemd[1]: Listening on LVM2 poll daemon socket.
[    2.357818] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    2.358260] systemd[1]: Listening on udev Control Socket.
[    2.358726] systemd[1]: Listening on Journal Audit Socket.
[    2.359124] systemd[1]: Reached target Remote File Systems.
[    2.359562] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.360051] systemd[1]: Listening on Journal Socket.
[    2.503561] lp: driver loaded but no devices found
[    2.506019] ppdev: user-space parallel port driver
[    2.529967] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    2.530793] Key type encrypted registered
[    2.532985] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    2.578109] systemd-journald[210]: Received request to flush runtime journal from PID 1
[    2.688706] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0E:00/input/input4
[    2.688809] ACPI: Sleep Button [SLPB]
[    2.688923] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0D:00/input/input5
[    2.689004] ACPI: Lid Switch [LID]
[    2.689109] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    2.689182] ACPI: Power Button [PWRF]
[    2.722330] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
[    2.724867] ACPI: AC Adapter [AC] (on-line)
[    2.738378] ACPI: Battery Slot [BAT0] (battery present)
[    2.738580] ACPI: Battery Slot [BAT1] (battery absent)
[    2.740271] Non-volatile memory driver v1.3
[    2.740304] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.784636] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.785800] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.795786] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    2.795863] cfg80211: failed to load regulatory.db
[    2.816259] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    2.832766] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[    2.832827] thinkpad_acpi: http://ibm-acpi.sf.net/
[    2.832886] thinkpad_acpi: ThinkPad BIOS CBET4000 4.8-1053-g4591bb6f7b-dirty, EC G2HT35WW-3.22
[    2.832959] thinkpad_acpi: Lenovo ThinkPad X230, model 2325QL5
[    2.834853] thinkpad_acpi: radio switch found; radios are enabled
[    2.835071] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[    2.835224] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    2.835299] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    2.836605] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[    2.838840] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    2.838960] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    2.843416] thinkpad_acpi: battery 1 registered (start 0, stop 0)
[    2.843426] battery: new extension: ThinkPad Battery Extension
[    2.844786] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    2.844801] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
[    2.844863] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    2.844991] RAPL PMU: hw unit of domain package 2^-16 Joules
[    2.845099] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    2.846156] Error: Driver 'pcspkr' is already registered, aborting...
[    2.893742] [drm] Replacing VGA console driver
[    2.894269] media: Linux media interface: v0.10
[    2.894906] Console: switching to colour dummy device 80x25
[    2.902977] cryptd: max_cpu_qlen set to 1000
[    2.903733] videodev: Linux video capture interface: v2.00
[    2.921809] AVX version of gcm_enc/dec engaged.
[    2.921815] AES CTR mode by8 optimization enabled
[    2.928766] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea)
[    2.934329] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[    2.934336] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[    2.934340] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[    2.934344] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[    2.934424] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input9
[    2.934500] usbcore: registered new interface driver uvcvideo
[    2.934503] USB Video Class driver (1.1.1)
[    2.946631] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.946636] [drm] Driver supports precise vblank timestamp query.
[    2.946920] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.952376] ath: phy0: ASPM enabled: 0x43
[    2.952381] ath: EEPROM regdomain: 0x60
[    2.952382] ath: EEPROM indicates we should expect a direct regpair map
[    2.952383] ath: Country alpha2 being used: 00
[    2.952384] ath: Regpair used: 0x60
[    2.967181] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    2.967409] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffa925c20b0000, irq=17
[    3.008348] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0
[    3.008522] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.014409] iTCO_vendor_support: vendor-support=0
[    3.015030] alg: No test for pcbc(aes) (pcbc-aes-aesni)
[    3.017964] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.018052] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[    3.018190] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.025384] Bluetooth: Core ver 2.22
[    3.025405] NET: Registered protocol family 31
[    3.025408] Bluetooth: HCI device and connection manager initialized
[    3.025413] Bluetooth: HCI socket layer initialized
[    3.025417] Bluetooth: L2CAP socket layer initialized
[    3.025424] Bluetooth: SCO socket layer initialized
[    3.032839] acpi device:0d: registered as cooling_device5
[    3.032918] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[    3.034369] usbcore: registered new interface driver btusb
[    3.034625] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.043890] Adding 16731132k swap on /dev/sda5.  Priority:-2 extents:1 across:16731132k SSFS
[    3.150234] Bluetooth: hci0: BCM: chip id 63
[    3.151232] Bluetooth: hci0: BCM: features 0x07
[    3.167236] Bluetooth: hci0: laptop
[    3.168241] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[    3.168264] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
[    3.168269] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
[    3.198238] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    3.198244] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.198247] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[    3.198249] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    3.198251] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    3.198254] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    3.198256] snd_hda_codec_realtek hdaudioC0D0:      Dock Mic=0x19
[    3.198258] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    3.243120] fbcon: inteldrmfb (fb0) is primary device
[    3.283412] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    3.283642] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    3.283681] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    3.283719] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    3.283756] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    3.283788] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    3.283823] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    3.283856] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[    3.296086] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[    3.296120] intel_rapl: Found RAPL domain package
[    3.296121] intel_rapl: Found RAPL domain core
[    3.296122] intel_rapl: Found RAPL domain uncore
[    4.061117] Console: switching to colour frame buffer device 170x48
[    4.083163] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.501734] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.502820] Bluetooth: BNEP filters: protocol multicast
[    4.504093] Bluetooth: BNEP socket layer initialized
[    4.736015] mei_me 0000:00:16.0: wait hw ready failed
[    4.736576] mei_me 0000:00:16.0: hw_start failed ret = -62
[    4.737130] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[    4.957442] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    5.220400] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    5.239593] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    5.255112] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    5.278051] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    5.377121] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    6.501392] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    6.583004] wlp2s0: authenticate with 2c:59:8a:70:7a:57
[    6.596829] wlp2s0: send auth to 2c:59:8a:70:7a:57 (try 1/3)
[    6.600765] wlp2s0: authenticated
[    6.604112] wlp2s0: associate with 2c:59:8a:70:7a:57 (try 1/3)
[    6.672282] wlp2s0: RX AssocResp from 2c:59:8a:70:7a:57 (capab=0x431 status=0 aid=2)
[    6.672486] wlp2s0: associated
[    6.695050] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[    6.756096] mei_me 0000:00:16.0: wait hw ready failed
[    6.756106] mei_me 0000:00:16.0: hw_start failed ret = -62
[    6.756124] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[    8.768084] mei_me 0000:00:16.0: wait hw ready failed
[    8.768094] mei_me 0000:00:16.0: hw_start failed ret = -62
[    8.768103] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
[    8.768107] mei_me 0000:00:16.0: reset failed ret = -19
[    8.768111] mei_me 0000:00:16.0: link layer initialization failed.
[    8.768115] mei_me 0000:00:16.0: init hw failure.
[    8.768269] mei_me 0000:00:16.0: initialization failed.
[    9.132195] random: crng init done
[    9.132203] random: 7 urandom warning(s) missed due to ratelimiting
[   10.970749] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   10.971592] Bridge firewalling registered
[   11.070451] Initializing XFRM netlink socket
[   11.104846] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[   11.325194] Bluetooth: RFCOMM TTY layer initialized
[   11.325201] Bluetooth: RFCOMM socket layer initialized
[   11.325206] Bluetooth: RFCOMM ver 1.11
[   18.284951] fuse init (API version 7.27)