blob: f433f02227155789034ea92ba9fc0290aec78cf3 [file] [log] [blame]
[ 0.000000] Linux version 5.3.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 9.2.1 20191130 (Debian 9.2.1-21)) #1 SMP Debian 5.3.15-1 (2019-12-07)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.3.0-3-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff24fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ff25000-0x00000000829fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047b5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: LENOVO 23532NU/23532NU, BIOS CBET4000 4.11-454-gb4a68a5a28 12/16/2019
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2893.462 MHz processor
[ 0.002030] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.002031] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.002034] last_pfn = 0x47b600 max_arch_pfn = 0x400000000
[ 0.002039] MTRR default type: write-back
[ 0.002039] MTRR fixed ranges enabled:
[ 0.002040] 00000-9FFFF write-back
[ 0.002041] A0000-BFFFF uncachable
[ 0.002042] C0000-FFFFF write-back
[ 0.002043] MTRR variable ranges enabled:
[ 0.002044] 0 base 080000000 mask FC0000000 uncachable
[ 0.002045] 1 base 0C0000000 mask FF0000000 uncachable
[ 0.002045] 2 base 0D0000000 mask FF0000000 write-combining
[ 0.002046] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.002046] 4 disabled
[ 0.002047] 5 disabled
[ 0.002047] 6 disabled
[ 0.002048] 7 disabled
[ 0.002048] 8 disabled
[ 0.002048] 9 disabled
[ 0.002326] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002678] last_pfn = 0x7ff25 max_arch_pfn = 0x400000000
[ 0.012030] BRK [0x131a01000, 0x131a01fff] PGTABLE
[ 0.012032] BRK [0x131a02000, 0x131a02fff] PGTABLE
[ 0.012033] BRK [0x131a03000, 0x131a03fff] PGTABLE
[ 0.012063] BRK [0x131a04000, 0x131a04fff] PGTABLE
[ 0.012064] BRK [0x131a05000, 0x131a05fff] PGTABLE
[ 0.012163] BRK [0x131a06000, 0x131a06fff] PGTABLE
[ 0.012190] BRK [0x131a07000, 0x131a07fff] PGTABLE
[ 0.012381] RAMDISK: [mem 0x30d9f000-0x346c6fff]
[ 0.012387] ACPI: Early table checksum verification disabled
[ 0.012390] ACPI: RSDP 0x00000000000F6750 000024 (v02 COREv4)
[ 0.012393] ACPI: XSDT 0x000000007FF4B0E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.012398] ACPI: FACP 0x000000007FF4EC40 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.012402] ACPI: DSDT 0x000000007FF4B280 0039C0 (v02 COREv4 COREBOOT 20110725 INTL 20190703)
[ 0.012405] ACPI: FACS 0x000000007FF4B240 000040
[ 0.012407] ACPI: FACS 0x000000007FF4B240 000040
[ 0.012409] ACPI: SSDT 0x000000007FF4ED40 001B03 (v02 COREv4 COREBOOT 0000002A CORE 20190703)
[ 0.012412] ACPI: MCFG 0x000000007FF50850 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.012415] ACPI: TCPA 0x000000007FF50890 000032 (v02 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.012417] ACPI: APIC 0x000000007FF508D0 00006C (v02 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.012419] ACPI: DMAR 0x000000007FF50940 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.012422] ACPI: HPET 0x000000007FF52A10 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.012429] ACPI: Local APIC address 0xfee00000
[ 0.012500] No NUMA configuration found
[ 0.012501] Faking a node at [mem 0x0000000000000000-0x000000047b5fffff]
[ 0.012504] NODE_DATA(0) allocated [mem 0x47b5ee000-0x47b5f2fff]
[ 0.012532] Zone ranges:
[ 0.012533] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.012535] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.012536] Normal [mem 0x0000000100000000-0x000000047b5fffff]
[ 0.012537] Device empty
[ 0.012537] Movable zone start for each node
[ 0.012538] Early memory node ranges
[ 0.012539] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.012540] node 0: [mem 0x0000000000100000-0x000000007ff24fff]
[ 0.012541] node 0: [mem 0x0000000100000000-0x000000047b5fffff]
[ 0.012551] Zeroed struct page in unavailable ranges: 317 pages
[ 0.012552] Initmem setup node 0 [mem 0x0000000000001000-0x000000047b5fffff]
[ 0.012554] On node 0 totalpages: 4175043
[ 0.012555] DMA zone: 64 pages used for memmap
[ 0.012555] DMA zone: 21 pages reserved
[ 0.012556] DMA zone: 3998 pages, LIFO batch:0
[ 0.012605] DMA32 zone: 8125 pages used for memmap
[ 0.012606] DMA32 zone: 519973 pages, LIFO batch:63
[ 0.020870] Normal zone: 57048 pages used for memmap
[ 0.020871] Normal zone: 3651072 pages, LIFO batch:63
[ 0.062055] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff]
[ 0.062285] ACPI: PM-Timer IO Port: 0x508
[ 0.062287] ACPI: Local APIC address 0xfee00000
[ 0.062303] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.062305] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.062307] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.062308] ACPI: IRQ0 used by override.
[ 0.062309] ACPI: IRQ9 used by override.
[ 0.062311] Using ACPI (MADT) for SMP configuration information
[ 0.062312] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.062316] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.062326] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.062327] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.062328] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.062329] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.062330] PM: Registered nosave memory: [mem 0x7ff25000-0x829fffff]
[ 0.062331] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff]
[ 0.062332] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.062333] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
[ 0.062333] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.062334] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[ 0.062335] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.062335] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[ 0.062337] [mem 0x82a00000-0xefffffff] available for PCI devices
[ 0.062338] Booting paravirtualized kernel on bare hardware
[ 0.062341] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.146701] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.146877] percpu: Embedded 53 pages/cpu s178200 r8192 d30696 u524288
[ 0.146883] pcpu-alloc: s178200 r8192 d30696 u524288 alloc=1*2097152
[ 0.146883] pcpu-alloc: [0] 0 1 2 3
[ 0.146902] Built 1 zonelists, mobility grouping on. Total pages: 4109785
[ 0.146903] Policy zone: Normal
[ 0.146905] Kernel command line: BOOT_IMAGE=/vmlinuz-5.3.0-3-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed
[ 0.147695] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.148070] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.148117] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.151116] Calgary: detecting Calgary via BIOS EBDA area
[ 0.151121] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.189508] Memory: 16263180K/16700172K available (10243K kernel code, 1197K rwdata, 3556K rodata, 1660K init, 2096K bss, 436992K reserved, 0K cma-reserved)
[ 0.189611] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.189622] Kernel/User page tables isolation: enabled
[ 0.189634] ftrace: allocating 33172 entries in 130 pages
[ 0.201020] rcu: Hierarchical RCU implementation.
[ 0.201022] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.201023] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.201024] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.204030] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
[ 0.204239] random: crng done (trusting CPU's manufacturer)
[ 0.205815] Console: colour VGA+ 80x25
[ 0.211317] printk: console [tty0] enabled
[ 0.211386] ACPI: Core revision 20190703
[ 0.211503] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.211590] APIC: Switch to symmetric I/O mode setup
[ 0.211648] DMAR: Host address width 36
[ 0.211704] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.211764] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.211834] DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff
[ 0.211891] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.211948] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.212019] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.212077] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.212135] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.212601] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.212659] x2apic enabled
[ 0.212718] Switched APIC routing to cluster x2apic.
[ 0.213206] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.231590] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b522c3b27, max_idle_ns: 440795215977 ns
[ 0.231666] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.92 BogoMIPS (lpj=11573848)
[ 0.231741] pid_max: default: 32768 minimum: 301
[ 0.231818] LSM: Security Framework initializing
[ 0.231878] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.231953] AppArmor: AppArmor initialized
[ 0.232010] TOMOYO Linux initialized
[ 0.232102] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.232198] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.232484] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.232549] process: using mwait in idle threads
[ 0.232606] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.232663] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.232722] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.232794] Spectre V2 : Mitigation: Full generic retpoline
[ 0.232849] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.232919] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.232980] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.233049] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.233109] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.233184] MDS: Mitigation: Clear CPU buffers
[ 0.233385] Freeing SMP alternatives memory: 24K
[ 0.235016] TSC deadline timer enabled
[ 0.235019] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.235188] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.235266] ... version: 3
[ 0.235320] ... bit width: 48
[ 0.235375] ... generic registers: 4
[ 0.235431] ... value mask: 0000ffffffffffff
[ 0.235489] ... max period: 00007fffffffffff
[ 0.235544] ... fixed-purpose events: 3
[ 0.235600] ... event mask: 000000070000000f
[ 0.235663] rcu: Hierarchical SRCU implementation.
[ 0.235663] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.235663] smp: Bringing up secondary CPUs ...
[ 0.235663] x86: Booting SMP configuration:
[ 0.235663] .... node #0, CPUs: #1
[ 0.235744] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.235913] #2 #3
[ 0.241724] smp: Brought up 1 node, 4 CPUs
[ 0.241724] smpboot: Max logical packages: 1
[ 0.241724] smpboot: Total of 4 processors activated (23147.69 BogoMIPS)
[ 0.241724] devtmpfs: initialized
[ 0.241724] x86/mm: Memory block size: 128MB
[ 0.244998] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.244998] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.244998] pinctrl core: initialized pinctrl subsystem
[ 0.244998] NET: Registered protocol family 16
[ 0.244998] audit: initializing netlink subsys (disabled)
[ 0.244998] audit: type=2000 audit(1576533827.032:1): state=initialized audit_enabled=0 res=1
[ 0.244998] cpuidle: using governor ladder
[ 0.244998] cpuidle: using governor menu
[ 0.244998] ACPI: bus type PCI registered
[ 0.244998] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.245274] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.245346] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.245412] PCI: Using configuration type 1 for base access
[ 0.245488] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.248365] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.395860] alg: No test for lzo-rle (lzo-rle-generic)
[ 0.395860] alg: No test for lzo-rle (lzo-rle-scomp)
[ 0.395860] ACPI: Added _OSI(Module Device)
[ 0.395860] ACPI: Added _OSI(Processor Device)
[ 0.395860] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.395903] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.395958] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.396015] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.396071] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.398125] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.400234] ACPI: EC: EC started
[ 0.400288] ACPI: EC: interrupt blocked
[ 0.400612] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.400669] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.400739] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
[ 0.400807] ACPI: Interpreter enabled
[ 0.400876] ACPI: (supports S0 S3 S4 S5)
[ 0.400931] ACPI: Using IOAPIC for interrupt routing
[ 0.401000] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.401180] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.404376] ACPI: Power Resource [FPWR] (off)
[ 0.404680] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.404739] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.404847] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.404926] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.405039] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
[ 0.405115] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff window] (conflicts with Adapter ROM [mem 0x000cf800-0x000d05ff])
[ 0.405321] PCI host bridge to bus 0000:00
[ 0.405379] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.405438] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.405497] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.405565] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.405633] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.405703] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.405770] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.405838] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.405906] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.405976] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.406046] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.406117] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.406188] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.406257] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.406325] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window]
[ 0.406395] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.406464] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.406528] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.406661] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.406729] pci 0000:00:02.0: reg 0x10: [mem 0xe2400000-0xe27fffff 64bit]
[ 0.406792] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.406862] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.406982] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.407048] pci 0000:00:04.0: reg 0x10: [mem 0xe2b30000-0xe2b37fff 64bit]
[ 0.407190] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.407270] pci 0000:00:14.0: reg 0x10: [mem 0xe2b20000-0xe2b2ffff 64bit]
[ 0.407393] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.407516] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.407592] pci 0000:00:19.0: reg 0x10: [mem 0xe2b00000-0xe2b1ffff]
[ 0.407655] pci 0000:00:19.0: reg 0x14: [mem 0xe2b3c000-0xe2b3cfff]
[ 0.407673] pci 0000:00:19.0: reg 0x18: [io 0x4040-0x405f]
[ 0.407786] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.407905] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.407984] pci 0000:00:1a.0: reg 0x10: [mem 0xe2b3f000-0xe2b3f3ff]
[ 0.408121] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.408244] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.408323] pci 0000:00:1b.0: reg 0x10: [mem 0xe2b38000-0xe2b3bfff 64bit]
[ 0.408451] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.408578] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400
[ 0.408785] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.408872] pci 0000:00:1c.0: Enabling MPC IRBNCE
[ 0.408930] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 0.409061] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400
[ 0.409292] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.409375] pci 0000:00:1c.1: Enabling MPC IRBNCE
[ 0.409433] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled
[ 0.409563] pci 0000:00:1c.2: [8086:1e18] type 01 class 0x060400
[ 0.409798] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.409880] pci 0000:00:1c.2: Enabling MPC IRBNCE
[ 0.409940] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
[ 0.410069] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.410147] pci 0000:00:1d.0: reg 0x10: [mem 0xe2b40000-0xe2b403ff]
[ 0.410282] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.410405] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.410619] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.410695] pci 0000:00:1f.2: reg 0x10: [io 0x4080-0x4087]
[ 0.410756] pci 0000:00:1f.2: reg 0x14: [io 0x4090-0x4093]
[ 0.410821] pci 0000:00:1f.2: reg 0x18: [io 0x4088-0x408f]
[ 0.410884] pci 0000:00:1f.2: reg 0x1c: [io 0x4094-0x4097]
[ 0.410947] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.411009] pci 0000:00:1f.2: reg 0x24: [mem 0xe2b3e000-0xe2b3e7ff]
[ 0.411109] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.411225] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.411300] pci 0000:00:1f.3: reg 0x10: [mem 0xe2b41000-0xe2b410ff 64bit]
[ 0.411377] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.411507] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[ 0.411587] pci 0000:00:1f.6: reg 0x10: [mem 0xe2b3d000-0xe2b3dfff 64bit]
[ 0.411868] pci 0000:01:00.0: [14e4:43a0] type 00 class 0x028000
[ 0.412021] pci 0000:01:00.0: reg 0x10: [mem 0xe2a00000-0xe2a07fff 64bit]
[ 0.412139] pci 0000:01:00.0: reg 0x18: [mem 0xe2800000-0xe29fffff 64bit]
[ 0.412445] pci 0000:01:00.0: supports D1 D2
[ 0.412500] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.412824] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.412888] pci 0000:00:1c.0: bridge window [mem 0xe2800000-0xe2afffff]
[ 0.413226] pci 0000:02:00.0: [1180:e822] type 00 class 0x080500
[ 0.413518] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.413822] pci 0000:02:00.0: reg 0x10: [mem 0xe0800000-0xe08000ff]
[ 0.414392] pci 0000:02:00.0: supports D1 D2
[ 0.414448] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.414882] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.414942] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.415003] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff]
[ 0.415070] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.415205] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.415264] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.415327] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff]
[ 0.415392] pci 0000:00:1c.2: bridge window [mem 0xe1400000-0xe1bfffff 64bit pref]
[ 0.415602] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.415701] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.415795] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.415889] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.415984] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.416077] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.416169] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.416261] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.416907] ACPI: EC: interrupt unblocked
[ 0.416970] ACPI: EC: event unblocked
[ 0.417029] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.417096] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events
[ 0.417209] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.417209] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.417209] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.417209] vgaarb: loaded
[ 0.417209] EDAC MC: Ver: 3.0.0
[ 0.417209] PCI: Using ACPI for IRQ routing
[ 0.417209] PCI: pci_cache_line_size set to 64 bytes
[ 0.419876] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.419878] e820: reserve RAM buffer [mem 0x7ff25000-0x7fffffff]
[ 0.419878] e820: reserve RAM buffer [mem 0x47b600000-0x47bffffff]
[ 0.420447] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.420508] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.422586] clocksource: Switched to clocksource tsc-early
[ 0.429216] VFS: Disk quotas dquot_6.6.0
[ 0.429288] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.429442] AppArmor: AppArmor Filesystem Enabled
[ 0.429513] pnp: PnP ACPI init
[ 0.429702] pnp 00:00: [Firmware Bug]: PNP resource [mem 0xf0000000-0x12fffffff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
[ 0.429814] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.429873] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.429932] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.431195] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.431254] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.431315] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.431374] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.431433] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.431493] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.431554] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.431618] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.432025] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.432088] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.432120] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.432178] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.432239] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.432257] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.432282] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.432301] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.432322] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.432339] pnp: PnP ACPI: found 7 devices
[ 0.433602] thermal_sys: Registered thermal governor 'fair_share'
[ 0.433603] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.433660] thermal_sys: Registered thermal governor 'step_wise'
[ 0.433717] thermal_sys: Registered thermal governor 'user_space'
[ 0.438268] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.438428] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.438492] pci 0000:00:1c.0: bridge window [mem 0xe2800000-0xe2afffff]
[ 0.438561] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.438621] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.438684] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff]
[ 0.438747] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.438823] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.438882] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.438945] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff]
[ 0.439006] pci 0000:00:1c.2: bridge window [mem 0xe1400000-0xe1bfffff 64bit pref]
[ 0.439084] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.439143] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.439201] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.439261] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.439319] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.439377] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.439437] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff window]
[ 0.439496] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff window]
[ 0.439555] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff window]
[ 0.439615] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff window]
[ 0.439678] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff window]
[ 0.439738] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff window]
[ 0.439796] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff window]
[ 0.439856] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff window]
[ 0.439916] pci_bus 0000:00: resource 18 [mem 0x82a00000-0xefffffff window]
[ 0.439976] pci_bus 0000:00: resource 19 [mem 0xfed40000-0xfed44fff window]
[ 0.440035] pci_bus 0000:01: resource 1 [mem 0xe2800000-0xe2afffff]
[ 0.440095] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.440152] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe08fffff]
[ 0.440210] pci_bus 0000:02: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.440280] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.440337] pci_bus 0000:03: resource 1 [mem 0xe1c00000-0xe23fffff]
[ 0.440396] pci_bus 0000:03: resource 2 [mem 0xe1400000-0xe1bfffff 64bit pref]
[ 0.440529] NET: Registered protocol family 2
[ 0.440708] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.440796] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.441010] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.441181] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.441261] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.441346] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.441475] NET: Registered protocol family 1
[ 0.441533] NET: Registered protocol family 44
[ 0.441596] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.442328] PCI: CLS 64 bytes, default 64
[ 0.442422] Trying to unpack rootfs image as initramfs...
[ 1.172020] Freeing initrd memory: 58528K
[ 1.172127] DMAR: No ATSR found
[ 1.172210] DMAR: dmar0: Using Queued invalidation
[ 1.172270] DMAR: dmar1: Using Queued invalidation
[ 1.242399] pci 0000:00:00.0: Adding to iommu group 0
[ 1.245300] pci 0000:00:02.0: Adding to iommu group 1
[ 1.245797] pci 0000:00:02.0: Using iommu direct mapping
[ 1.245883] pci 0000:00:04.0: Adding to iommu group 2
[ 1.245970] pci 0000:00:14.0: Adding to iommu group 3
[ 1.246063] pci 0000:00:19.0: Adding to iommu group 4
[ 1.246149] pci 0000:00:1a.0: Adding to iommu group 5
[ 1.246238] pci 0000:00:1b.0: Adding to iommu group 6
[ 1.246326] pci 0000:00:1c.0: Adding to iommu group 7
[ 1.246416] pci 0000:00:1c.1: Adding to iommu group 8
[ 1.246503] pci 0000:00:1c.2: Adding to iommu group 9
[ 1.246594] pci 0000:00:1d.0: Adding to iommu group 10
[ 1.246694] pci 0000:00:1f.0: Adding to iommu group 11
[ 1.246761] pci 0000:00:1f.2: Adding to iommu group 11
[ 1.246827] pci 0000:00:1f.3: Adding to iommu group 11
[ 1.246893] pci 0000:00:1f.6: Adding to iommu group 11
[ 1.246988] pci 0000:01:00.0: Adding to iommu group 12
[ 1.247082] pci 0000:02:00.0: Adding to iommu group 13
[ 1.247321] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 1.249186] Initialise system trusted keyrings
[ 1.249252] Key type blacklist registered
[ 1.249343] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 1.250422] zbud: loaded
[ 1.250713] Platform Keyring initialized
[ 1.250771] Key type asymmetric registered
[ 1.250828] Asymmetric key parser 'x509' registered
[ 1.250892] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 1.250998] io scheduler mq-deadline registered
[ 1.251296] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26
[ 1.251563] pcieport 0000:00:1c.1: PME: Signaling with IRQ 27
[ 1.251649] pcieport 0000:00:1c.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 1.252001] pcieport 0000:00:1c.2: PME: Signaling with IRQ 28
[ 1.252090] pcieport 0000:00:1c.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 1.252285] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.252355] intel_idle: MWAIT substates: 0x21120
[ 1.252356] intel_idle: v0.4.1 model 0x3A
[ 1.252494] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.254023] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.254084] ACPI: Thermal Zone [THM0] (62 C)
[ 1.254925] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.254985] ACPI: Thermal Zone [THM1] (27 C)
[ 1.255116] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.255557] Linux agpgart interface v0.103
[ 1.255654] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.255722] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 1.255962] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.257604] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.257665] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.257795] mousedev: PS/2 mouse device common for all mice
[ 1.257886] rtc_cmos 00:03: RTC can wake from S4
[ 1.258082] rtc_cmos 00:03: registered as rtc0
[ 1.258164] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.258240] intel_pstate: Intel P-state driver initializing
[ 1.258506] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.259125] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.259405] NET: Registered protocol family 10
[ 1.277953] Segment Routing with IPv6
[ 1.278068] mip6: Mobile IPv6
[ 1.278134] NET: Registered protocol family 17
[ 1.278276] mpls_gso: MPLS GSO support
[ 1.278822] microcode: sig=0x306a9, pf=0x10, revision=0x21
[ 1.278940] microcode: Microcode Update Driver: v2.2.
[ 1.278959] sched_clock: Marking stable (1271271609, 7452057)->(1285600074, -6876408)
[ 1.279480] registered taskstats version 1
[ 1.279547] Loading compiled-in X.509 certificates
[ 1.315839] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.315923] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 1.316000] zswap: loaded using pool lzo/zbud
[ 1.316091] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.316418] rtc_cmos 00:03: setting system clock to 2019-12-16T22:03:48 UTC (1576533828)
[ 1.317503] Freeing unused kernel image memory: 1660K
[ 1.343815] Write protecting the kernel read-only data: 16384k
[ 1.344867] Freeing unused kernel image memory: 2036K
[ 1.345304] Freeing unused kernel image memory: 540K
[ 1.360882] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.360941] x86/mm: Checking user space page tables
[ 1.366765] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.366823] Run /init as init process
[ 1.486836] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input2
[ 1.487315] ACPI: Sleep Button [SLPB]
[ 1.487437] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input3
[ 1.487521] ACPI: Lid Switch [LID]
[ 1.487637] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.487723] ACPI: Power Button [PWRF]
[ 1.498952] pps_core: LinuxPPS API ver. 1 registered
[ 1.499012] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.500441] PTP clock support registered
[ 1.521478] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20190703/utaddress-204)
[ 1.521574] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.521648] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190703/utaddress-204)
[ 1.522902] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.522975] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190703/utaddress-204)
[ 1.523065] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.523137] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190703/utaddress-204)
[ 1.523227] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.523300] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.523465] sdhci: Secure Digital Host Controller Interface driver
[ 1.523525] sdhci: Copyright(c) Pierre Ossman
[ 1.526457] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.526517] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.526733] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.529874] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 7)
[ 1.530452] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.530723] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 1.532858] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.539966] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[ 1.541884] ACPI: bus type USB registered
[ 1.541964] usbcore: registered new interface driver usbfs
[ 1.542031] usbcore: registered new interface driver hub
[ 1.542112] usbcore: registered new device driver usb
[ 1.542931] SCSI subsystem initialized
[ 1.547476] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.548632] ehci-pci: EHCI PCI platform driver
[ 1.548836] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.548899] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.548986] ehci-pci 0000:00:1a.0: debug port 2
[ 1.553679] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.553763] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe2b3f000
[ 1.557836] cryptd: max_cpu_qlen set to 1000
[ 1.568653] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.568778] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[ 1.568852] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.568926] usb usb1: Product: EHCI Host Controller
[ 1.568985] usb usb1: Manufacturer: Linux 5.3.0-3-amd64 ehci_hcd
[ 1.569045] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.569491] hub 1-0:1.0: USB hub found
[ 1.569558] hub 1-0:1.0: 3 ports detected
[ 1.570019] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.570087] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.571267] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930
[ 1.571346] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.571559] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[ 1.571630] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.571707] usb usb2: Product: xHCI Host Controller
[ 1.571711] libata version 3.00 loaded.
[ 1.571765] usb usb2: Manufacturer: Linux 5.3.0-3-amd64 xhci-hcd
[ 1.571826] usb usb2: SerialNumber: 0000:00:14.0
[ 1.571997] hub 2-0:1.0: USB hub found
[ 1.572063] hub 2-0:1.0: 4 ports detected
[ 1.572263] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.572271] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.572332] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 1.572386] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.572480] ehci-pci 0000:00:1d.0: debug port 2
[ 1.572531] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.572712] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
[ 1.572829] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.572940] usb usb4: Product: xHCI Host Controller
[ 1.573027] usb usb4: Manufacturer: Linux 5.3.0-3-amd64 xhci-hcd
[ 1.573114] usb usb4: SerialNumber: 0000:00:14.0
[ 1.573288] hub 4-0:1.0: USB hub found
[ 1.573377] hub 4-0:1.0: 4 ports detected
[ 1.576505] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.576576] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe2b40000
[ 1.589695] ahci 0000:00:1f.2: version 3.0
[ 1.589878] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.590352] AVX version of gcm_enc/dec engaged.
[ 1.590412] AES CTR mode by8 optimization enabled
[ 1.591682] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.591927] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[ 1.592002] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.592075] usb usb3: Product: EHCI Host Controller
[ 1.592134] usb usb3: Manufacturer: Linux 5.3.0-3-amd64 ehci_hcd
[ 1.592194] usb usb3: SerialNumber: 0000:00:1d.0
[ 1.592386] hub 3-0:1.0: USB hub found
[ 1.592453] hub 3-0:1.0: 3 ports detected
[ 1.600039] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
[ 1.600117] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.633864] scsi host0: ahci
[ 1.634855] scsi host1: ahci
[ 1.635000] scsi host2: ahci
[ 1.635131] scsi host3: ahci
[ 1.635261] scsi host4: ahci
[ 1.635388] scsi host5: ahci
[ 1.635492] ata1: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e100 irq 31
[ 1.635564] ata2: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e180 irq 31
[ 1.635633] ata3: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e200 irq 31
[ 1.635707] ata4: DUMMY
[ 1.635762] ata5: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e300 irq 31
[ 1.635833] ata6: DUMMY
[ 1.644167] [drm] VT-d active for gfx access
[ 1.644233] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 1.645419] Console: switching to colour dummy device 80x25
[ 1.645486] [drm] DMAR active, disabling use of stolen memory
[ 1.655982] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.695672] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.695677] [drm] Driver supports precise vblank timestamp query.
[ 1.695923] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.751464] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:46:56:66
[ 1.751475] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.751528] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 1.752956] e1000e 0000:00:19.0 eno0: renamed from eth0
[ 1.755225] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0
[ 1.755366] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.781117] acpi device:0d: registered as cooling_device5
[ 1.781225] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 1.907700] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.915714] usb 2-3: new high-speed USB device number 2 using xhci_hcd
[ 1.927699] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.950154] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.951132] ata1.00: ATA-9: KINGSTON SKC400S37512G, SAFM001B, max UDMA/133
[ 1.951142] ata1.00: 1000215216 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 1.951387] ata1.00: configured for UDMA/133
[ 1.951650] scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC400S 001B PQ: 0 ANSI: 5
[ 2.065431] usb 2-3: New USB device found, idVendor=2109, idProduct=2813, bcdDevice= 2.21
[ 2.065436] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.065440] usb 2-3: Product: USB2.0 Hub
[ 2.065442] usb 2-3: Manufacturer: VIA Labs, Inc.
[ 2.066331] hub 2-3:1.0: USB hub found
[ 2.066518] hub 2-3:1.0: 4 ports detected
[ 2.067976] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 2.067981] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.068127] hub 1-1:1.0: USB hub found
[ 2.068226] hub 1-1:1.0: 6 ports detected
[ 2.082712] fbcon: i915drmfb (fb0) is primary device
[ 2.088551] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 2.088553] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.089043] hub 3-1:1.0: USB hub found
[ 2.089257] hub 3-1:1.0: 8 ports detected
[ 2.252500] usb 4-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 2.252521] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
[ 2.255709] tsc: Refined TSC clocksource calibration: 2893.426 MHz
[ 2.255728] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b500ca33a, max_idle_ns: 440795203665 ns
[ 2.255778] clocksource: Switched to clocksource tsc
[ 2.266716] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.304123] ata2.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133
[ 2.304126] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 2.314384] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262
[ 2.314393] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 2.353883] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 2.353951] ata2.00: configured for UDMA/133
[ 2.355712] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[ 2.363504] scsi 1:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5
[ 2.387760] usb 3-1.5: new high-speed USB device number 3 using ehci-pci
[ 2.396112] usb 4-3: New USB device found, idVendor=2109, idProduct=0813, bcdDevice= 2.21
[ 2.396116] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.396118] usb 4-3: Product: USB3.0 Hub
[ 2.396120] usb 4-3: Manufacturer: VIA Labs, Inc.
[ 2.399232] hub 4-3:1.0: USB hub found
[ 2.399467] hub 4-3:1.0: 4 ports detected
[ 2.465449] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01
[ 2.465453] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.465455] usb 1-1.3: Product: Biometric Coprocessor
[ 2.465457] usb 1-1.3: Manufacturer: Auth
[ 2.496751] usb 3-1.5: New USB device found, idVendor=17ef, idProduct=100a, bcdDevice= 0.00
[ 2.496755] usb 3-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.497297] hub 3-1.5:1.0: USB hub found
[ 2.497453] hub 3-1.5:1.0: 6 ports detected
[ 2.543755] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[ 2.655107] usb 1-1.4: config 1 interface 1 altsetting 0 endpoint 0x83 has wMaxPacketSize 0, skipping
[ 2.655110] usb 1-1.4: config 1 interface 1 altsetting 0 endpoint 0x3 has wMaxPacketSize 0, skipping
[ 2.656515] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12
[ 2.656519] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.656521] usb 1-1.4: Product: BCM20702A0
[ 2.656524] usb 1-1.4: Manufacturer: Broadcom Corp
[ 2.656525] usb 1-1.4: SerialNumber: B8763FA9D32E
[ 2.678740] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.679145] ata3.00: supports DRM functions and may not be fully accessible
[ 2.679248] ata3.00: ATA-11: KINGSTON SUV500MS240G, 003056RI, max UDMA/133
[ 2.679251] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 2.680075] ata3.00: Trusted Computing capability qword not valid!
[ 2.680683] ata3.00: supports DRM functions and may not be fully accessible
[ 2.681619] ata3.00: Trusted Computing capability qword not valid!
[ 2.681626] ata3.00: configured for UDMA/133
[ 2.682188] scsi 2:0:0:0: Direct-Access ATA KINGSTON SUV500M 56RI PQ: 0 ANSI: 5
[ 2.735749] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
[ 2.787759] usb 3-1.5.1: new full-speed USB device number 4 using ehci-pci
[ 2.841873] Console: switching to colour frame buffer device 240x67
[ 2.852076] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11
[ 2.852080] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.852083] usb 1-1.6: Product: Integrated Camera
[ 2.852084] usb 1-1.6: Manufacturer: Ricoh Company Ltd.
[ 2.886275] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 2.901720] usb 3-1.5.1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10
[ 2.904607] usb 3-1.5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.907449] usb 3-1.5.1: Product: USB Receiver
[ 2.910281] usb 3-1.5.1: Manufacturer: Logitech
[ 2.920654] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.931319] usbcore: registered new interface driver usbhid
[ 2.933326] usbhid: USB HID core driver
[ 2.937153] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.1/3-1.5.1:1.0/0003:046D:C52B.0001/input/input8
[ 2.991744] usb 3-1.5.3: new high-speed USB device number 5 using ehci-pci
[ 2.993648] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 2.996438] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.998146] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input0
[ 2.998672] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.1/3-1.5.1:1.1/0003:046D:C52B.0002/input/input9
[ 2.998860] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.1/3-1.5.1:1.1/0003:046D:C52B.0002/input/input10
[ 3.022119] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 3.022133] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
[ 3.022138] sd 2:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 3.022140] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 3.022150] sd 2:0:0:0: [sdc] Write Protect is off
[ 3.022151] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.022165] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.022529] sdc: sdc1 sdc2 sdc3
[ 3.022811] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 3.024257] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 3.024881] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.026017] sd 0:0:0:0: [sda] Write Protect is off
[ 3.027863] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.027890] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.029453] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.043716] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.046565] sda: sda1 sda2 < sda5 >
[ 3.049023] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.053069] sdb: sdb1
[ 3.055022] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.059731] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.1/3-1.5.1:1.1/0003:046D:C52B.0002/input/input11
[ 3.061521] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input1
[ 3.063436] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input2
[ 3.104346] usb 3-1.5.3: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00
[ 3.105900] usb 3-1.5.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.107653] hub 3-1.5.3:1.0: USB hub found
[ 3.109497] hub 3-1.5.3:1.0: 3 ports detected
[ 3.191691] usb 3-1.5.6: new high-speed USB device number 6 using ehci-pci
[ 3.216274] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input2
[ 3.282312] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
[ 3.304275] usb 3-1.5.6: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00
[ 3.306445] usb 3-1.5.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.309811] hub 3-1.5.6:1.0: USB hub found
[ 3.311842] hub 3-1.5.6:1.0: 4 ports detected
[ 3.344743] input: Logitech Unifying Device. Wireless PID:1028 Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.1/3-1.5.1:1.2/0003:046D:C52B.0003/0003:046D:1028.0004/input/input13
[ 3.350510] hid-generic 0003:046D:1028.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on usb-0000:00:1d.0-1.5.1/input2:1
[ 3.399678] usb 3-1.5.3.3: new full-speed USB device number 7 using ehci-pci
[ 3.438230] input: Logitech M570 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.1/3-1.5.1:1.2/0003:046D:C52B.0003/0003:046D:1028.0004/input/input17
[ 3.440799] logitech-hidpp-device 0003:046D:1028.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M570] on usb-0000:00:1d.0-1.5.1/input2:1
[ 3.563670] raid6: sse2x4 gen() 11371 MB/s
[ 3.631668] raid6: sse2x4 xor() 6995 MB/s
[ 3.699672] raid6: sse2x2 gen() 13034 MB/s
[ 3.767669] raid6: sse2x2 xor() 8859 MB/s
[ 3.835667] raid6: sse2x1 gen() 10964 MB/s
[ 3.903671] raid6: sse2x1 xor() 7645 MB/s
[ 3.905130] raid6: using algorithm sse2x2 gen() 13034 MB/s
[ 3.906570] raid6: .... xor() 8859 MB/s, rmw enabled
[ 3.908020] raid6: using ssse3x2 recovery algorithm
[ 3.909452] usb 3-1.5.3.3: device descriptor read/64, error -32
[ 3.911613] xor: automatically using best checksumming function avx
[ 3.914603] async_tx: api initialized (async)
[ 4.093595] device-mapper: uevent: version 1.0.3
[ 4.095889] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[ 4.171814] usb 3-1.5.3.3: New USB device found, idVendor=056d, idProduct=0002, bcdDevice=75.30
[ 4.175468] usb 3-1.5.3.3: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[ 4.179146] usb 3-1.5.3.3: Product: EIZO USB HID Monitor
[ 4.181147] usb 3-1.5.3.3: Manufacturer: EIZO
[ 4.211765] usb 3-1.5.2: new full-speed USB device number 8 using ehci-pci
[ 4.328221] usb 3-1.5.2: New USB device found, idVendor=04b4, idProduct=4042, bcdDevice= 1.03
[ 4.331828] usb 3-1.5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.340736] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.2/3-1.5.2:1.0/0003:04B4:4042.0005/input/input18
[ 4.400239] hid-generic 0003:04B4:4042.0005: input,hidraw2: USB HID v1.11 Keyboard [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input0
[ 4.405327] usb 3-1.5.6.1: new high-speed USB device number 9 using ehci-pci
[ 4.414465] input: HID 04b4:4042 Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.2/3-1.5.2:1.1/0003:04B4:4042.0006/input/input19
[ 4.416907] input: HID 04b4:4042 System Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.2/3-1.5.2:1.1/0003:04B4:4042.0006/input/input20
[ 4.475914] input: HID 04b4:4042 Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.2/3-1.5.2:1.1/0003:04B4:4042.0006/input/input21
[ 4.481256] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.2/3-1.5.2:1.1/0003:04B4:4042.0006/input/input22
[ 4.487415] input: HID 04b4:4042 Keyboard as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.2/3-1.5.2:1.1/0003:04B4:4042.0006/input/input23
[ 4.489348] hid-generic 0003:056D:0002.0007: hiddev1,hidraw3: USB HID v1.10 Device [EIZO EIZO USB HID Monitor] on usb-0000:00:1d.0-1.5.3.3/input0
[ 4.491070] hid-generic 0003:04B4:4042.0006: input,hiddev2,hidraw4: USB HID v1.11 Mouse [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input1
[ 4.516551] usb 3-1.5.6.1: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00
[ 4.520464] usb 3-1.5.6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.524900] hub 3-1.5.6.1:1.0: USB hub found
[ 4.529305] hub 3-1.5.6.1:1.0: 4 ports detected
[ 4.819764] usb 3-1.5.6.1.2: new full-speed USB device number 10 using ehci-pci
[ 4.939084] usb 3-1.5.6.1.2: New USB device found, idVendor=067b, idProduct=2305, bcdDevice= 2.02
[ 4.943020] usb 3-1.5.6.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.945399] usb 3-1.5.6.1.2: Product: IEEE-1284 Controller
[ 4.947781] usb 3-1.5.6.1.2: Manufacturer: Prolific Technology Inc.
[ 5.047789] usb 3-1.5.6.1.3: new full-speed USB device number 11 using ehci-pci
[ 5.161710] usb 3-1.5.6.1.3: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 4.00
[ 5.165548] usb 3-1.5.6.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.169322] usb 3-1.5.6.1.3: Product: USB-Serial Controller D
[ 5.173040] usb 3-1.5.6.1.3: Manufacturer: Prolific Technology Inc.
[ 14.596126] PM: Image not found (code -22)
[ 14.601321] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[ 14.601324] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[ 14.601328] PM: Marking nosave pages: [mem 0x7ff25000-0xffffffff]
[ 14.603757] PM: Basic memory bitmaps created
[ 14.604660] PM: Basic memory bitmaps freed
[ 14.605460] video LNXVIDEO:00: Restoring backlight state
[ 14.735236] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 14.795651] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 14.961838] systemd[1]: Inserted module 'autofs4'
[ 14.988372] systemd[1]: systemd 244-3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 15.008004] systemd[1]: Detected architecture x86-64.
[ 15.017395] systemd[1]: Set hostname to <TP-T430s>.
[ 15.130503] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 15.161667] systemd[1]: /lib/systemd/system/thinkfan.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/thinkfan.pid → /run/thinkfan.pid; please update the unit file accordingly.
[ 15.164024] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
[ 15.183399] systemd[1]: /lib/systemd/system/fancontrol.service:10: PIDFile= references a path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly.
[ 15.186250] systemd[1]: /lib/systemd/system/docker.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock → /run/docker.sock; please update the unit file accordingly.
[ 15.193483] systemd[1]: /etc/systemd/system/anydesk.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly.
[ 15.214803] systemd[1]: /lib/systemd/system/pcscd.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/pcscd/pcscd.comm → /run/pcscd/pcscd.comm; please update the unit file accordingly.
[ 15.224367] systemd[1]: Created slice system-getty.slice.
[ 15.226594] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[ 15.231967] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 15.236947] systemd[1]: Created slice system-tor.slice.
[ 15.241304] systemd[1]: Created slice User and Session Slice.
[ 15.245421] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 15.249520] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 15.253369] systemd[1]: Reached target User and Group Name Lookups.
[ 15.257305] systemd[1]: Reached target Remote File Systems.
[ 15.259034] systemd[1]: Reached target Slices.
[ 15.262942] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 15.266801] systemd[1]: Listening on LVM2 poll daemon socket.
[ 15.270874] systemd[1]: Listening on Syslog Socket.
[ 15.274293] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 15.277955] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 15.281755] systemd[1]: Listening on Journal Audit Socket.
[ 15.285397] systemd[1]: Listening on Journal Socket (/dev/log).
[ 15.289116] systemd[1]: Listening on Journal Socket.
[ 15.292796] systemd[1]: Listening on udev Control Socket.
[ 15.296411] systemd[1]: Listening on udev Kernel Socket.
[ 15.300832] systemd[1]: Mounting Huge Pages File System...
[ 15.304641] systemd[1]: Mounting POSIX Message Queue File System...
[ 15.308471] systemd[1]: Mounting Kernel Debug File System...
[ 15.312263] systemd[1]: Starting Availability of block devices...
[ 15.316083] systemd[1]: Starting Set the console keyboard layout...
[ 15.320048] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 15.324099] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 15.327821] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 15.327867] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 15.329508] systemd[1]: Starting Journal Service...
[ 15.344329] systemd[1]: Starting Load Kernel Modules...
[ 15.347043] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 15.356044] systemd[1]: Starting udev Coldplug all Devices...
[ 15.360444] systemd[1]: Mounted Huge Pages File System.
[ 15.361969] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 15.366501] systemd[1]: Mounted POSIX Message Queue File System.
[ 15.370390] systemd[1]: Mounted Kernel Debug File System.
[ 15.373440] loop: module loaded
[ 15.376410] systemd[1]: Started Availability of block devices.
[ 15.379199] systemd[1]: Started Set the console keyboard layout.
[ 15.383690] systemd[1]: Started Create list of static device nodes for the current kernel.
[ 15.388104] systemd[1]: Started Remount Root and Kernel File Systems.
[ 15.389730] lp: driver loaded but no devices found
[ 15.394433] systemd[1]: Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 15.396062] ppdev: user-space parallel port driver
[ 15.401815] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 15.402900] systemd[1]: Starting Load/Save Random Seed...
[ 15.408273] systemd[1]: Starting Create System Users...
[ 15.412431] systemd[1]: Started Load Kernel Modules.
[ 15.416444] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[ 15.416542] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
[ 15.417563] systemd[1]: Starting Apply Kernel Variables...
[ 15.433285] systemd[1]: Started Load/Save Random Seed.
[ 15.437553] systemd[1]: Started Apply Kernel Variables.
[ 15.447614] systemd[1]: Started Create System Users.
[ 15.451147] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 15.474288] systemd[1]: Started Create Static Device Nodes in /dev.
[ 15.476619] systemd[1]: Reached target Local File Systems (Pre).
[ 15.484391] systemd[1]: Mounting Mount unit for core18, revision 1265...
[ 15.488412] systemd[1]: Mounting Mount unit for core18, revision 1279...
[ 15.492017] systemd[1]: Mounting Mount unit for sdlpop, revision 211...
[ 15.496496] systemd[1]: Mounting Mount unit for snapd, revision 5643...
[ 15.501213] systemd[1]: Mounting Mount unit for snapd, revision 5754...
[ 15.505184] systemd[1]: Starting udev Kernel Device Manager...
[ 15.509604] systemd[1]: Started udev Coldplug all Devices.
[ 15.514981] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[ 15.524376] systemd[1]: Started Helper to synchronize boot up for ifupdown.
[ 15.532186] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 15.580510] systemd[1]: Mounted Mount unit for core18, revision 1265.
[ 15.583891] systemd[1]: Mounted Mount unit for core18, revision 1279.
[ 15.586372] systemd[1]: Mounted Mount unit for sdlpop, revision 211.
[ 15.600093] systemd[1]: Mounted Mount unit for snapd, revision 5643.
[ 15.603562] systemd[1]: Mounted Mount unit for snapd, revision 5754.
[ 15.642314] systemd[1]: Started udev Kernel Device Manager.
[ 15.647495] systemd[1]: Starting Show Plymouth Boot Screen...
[ 15.671321] systemd[1]: plymouth-start.service: Succeeded.
[ 15.673865] systemd[1]: Started Show Plymouth Boot Screen.
[ 15.676734] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
[ 15.676863] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
[ 15.765361] systemd[1]: Started Journal Service.
[ 15.778536] systemd-journald[493]: Received client request to flush runtime journal.
[ 15.828970] ACPI: AC Adapter [AC] (on-line)
[ 15.840738] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 15.843076] battery: ACPI: Battery Slot [BAT1] (battery absent)
[ 15.850241] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 15.886709] Non-volatile memory driver v1.3
[ 15.892806] iTCO_vendor_support: vendor-support=0
[ 15.895268] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 15.898234] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 15.900714] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 15.910315] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 15.927729] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 15.931647] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.028131] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 16.028423] input: PC Speaker as /devices/platform/pcspkr/input/input24
[ 16.030198] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 16.030199] thinkpad_acpi: ThinkPad BIOS CBET4000 4.11-454-gb4a68a5a28, EC G7HT39WW-3.22
[ 16.030200] thinkpad_acpi: Lenovo ThinkPad T430s, model 23532NU
[ 16.038648] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 16.040398] thinkpad_acpi: radio switch found; radios are enabled
[ 16.040625] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 16.044619] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 16.045050] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 16.046668] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 16.048787] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 16.052762] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 16.093691] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 16.131643] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 16.155842] wl: loading out-of-tree module taints kernel.
[ 16.157808] wl: module license 'MIXED/Proprietary' taints kernel.
[ 16.159779] Disabling lock debugging due to kernel taint
[ 16.169417] wl: module verification failed: signature and/or required key missing - tainting kernel
[ 16.169828] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 16.173613] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 16.175659] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 16.177682] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 16.179680] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 16.182175] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 16.184137] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 16.187440] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 16.203366] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
[ 16.217344] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 16.219637] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 16.223508] thinkpad_acpi: battery 1 registered (start 0, stop 100)
[ 16.223521] battery: new extension: ThinkPad Battery Extension
[ 16.255562] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26
[ 16.257730] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27
[ 16.259764] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input28
[ 16.261826] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input25
[ 16.261828] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input29
[ 16.266219] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input30
[ 16.269495] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input31
[ 16.271591] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input32
[ 16.274880] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input33
[ 16.279608] wlan0: Broadcom BCM43a0 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)
[ 16.375755] Adding 16699388k swap on /dev/mapper/TP--T430s--vg-swap_1. Priority:-2 extents:1 across:16699388k SSFS
[ 16.454831] wl 0000:01:00.0 wlp1s0: renamed from wlan0
[ 16.525266] intel_rapl_common: Found RAPL domain package
[ 16.527223] intel_rapl_common: Found RAPL domain core
[ 16.529085] intel_rapl_common: Found RAPL domain uncore
[ 16.700849] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 16.707295] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 16.864108] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 16.921263] audit: type=1400 audit(1576533844.099:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1227 comm="apparmor_parser"
[ 16.923199] audit: type=1400 audit(1576533844.099:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1227 comm="apparmor_parser"
[ 16.925243] audit: type=1400 audit(1576533844.099:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1227 comm="apparmor_parser"
[ 16.927203] audit: type=1400 audit(1576533844.103:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld" pid=1228 comm="apparmor_parser"
[ 16.929067] audit: type=1400 audit(1576533844.107:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1226 comm="apparmor_parser"
[ 16.931943] audit: type=1400 audit(1576533844.111:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=1229 comm="apparmor_parser"
[ 16.935019] audit: type=1400 audit(1576533844.111:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=1245 comm="apparmor_parser"
[ 16.937016] audit: type=1400 audit(1576533844.111:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=1243 comm="apparmor_parser"
[ 16.940132] audit: type=1400 audit(1576533844.119:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1249 comm="apparmor_parser"
[ 16.943430] audit: type=1400 audit(1576533844.119:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1248 comm="apparmor_parser"
[ 17.051147] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input34
[ 17.181371] Process accounting resumed
[ 18.178771] vboxdrv: Found 4 processor cores
[ 18.215234] vboxdrv: TSC mode is Invariant, tentative frequency 2893425233 Hz
[ 18.216579] vboxdrv: Successfully loaded version 6.1.0_Debian (interface 0x002d0001)
[ 18.425667] VBoxNetFlt: Successfully started.
[ 18.440610] VBoxNetAdp: Successfully started.
[ 18.966601] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 19.060793] mc: Linux media interface: v0.10
[ 19.106168] Bluetooth: Core ver 2.22
[ 19.113239] NET: Registered protocol family 31
[ 19.114518] Bluetooth: HCI device and connection manager initialized
[ 19.116427] Bluetooth: HCI socket layer initialized
[ 19.117602] Bluetooth: L2CAP socket layer initialized
[ 19.119019] Bluetooth: SCO socket layer initialized
[ 19.133937] videodev: Linux video capture interface: v2.00
[ 19.149851] usbcore: registered new interface driver btusb
[ 19.260385] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.261727] Bluetooth: BNEP filters: protocol multicast
[ 19.263064] Bluetooth: BNEP socket layer initialized
[ 19.266163] Bluetooth: hci0: BCM: chip id 63
[ 19.269005] Bluetooth: hci0: BCM: features 0x07
[ 19.271919] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5)
[ 19.287007] Bluetooth: hci0: TP-T430s
[ 19.289000] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669
[ 19.292554] bluetooth hci0: firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21e6.hcd
[ 19.312547] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 19.313949] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 19.315860] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 19.317352] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 19.319144] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input35
[ 19.322543] usbcore: registered new interface driver uvcvideo
[ 19.323945] USB Video Class driver (1.1.1)
[ 20.157991] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669
[ 20.173998] Bluetooth: hci0: Broadcom Bluetooth Device
[ 20.315031] Bluetooth: RFCOMM TTY layer initialized
[ 20.315037] Bluetooth: RFCOMM socket layer initialized
[ 20.315042] Bluetooth: RFCOMM ver 1.11
[ 20.826448] usbcore: registered new interface driver usbserial_generic
[ 20.826458] usbserial: USB Serial support registered for generic
[ 20.834391] usbcore: registered new interface driver pl2303
[ 20.835822] usbserial: USB Serial support registered for pl2303
[ 20.838794] pl2303 3-1.5.6.1.3:1.0: pl2303 converter detected
[ 20.848373] usb 3-1.5.6.1.3: pl2303 converter now attached to ttyUSB0
[ 20.857391] usblp 3-1.5.6.1.2:1.0: usblp3: USB Bidirectional printer dev 10 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
[ 20.857426] usbcore: registered new interface driver usblp
[ 22.972207] rfkill: input handler disabled
[ 24.725478] e1000e: eno0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 24.725521] IPv6: ADDRCONF(NETDEV_CHANGE): eno0: link becomes ready
[ 24.986206] logitech-hidpp-device 0003:046D:1028.0004: HID++ 1.0 device connected.
[ 25.254042] kauditd_printk_skb: 32 callbacks suppressed
[ 25.254043] audit: type=1400 audit(1576533852.431:44): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=3015 comm="apparmor_parser"
[ 25.391031] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 25.393898] Bridge firewalling registered
[ 25.641739] Initializing XFRM netlink socket
[ 29.617457] rfkill: input handler enabled
[ 30.749433] e1000e: eno0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 33.622922] rfkill: input handler disabled