blob: a7c7c7ca0a510adb3e1c097a1d309df01e28f890 [file] [log] [blame]
[ 0.000000] Linux version 4.17.4-1-ARCH (builduser@heftig-469) (gcc version 8.1.1 20180531 (GCC)) #1 SMP PREEMPT Tue Jul 3 15:45:09 UTC 2018
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/sda4 rw iomem=relaxed intel_iommu=on acpi_backlight=native
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff22fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ff23000-0x000000008e9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 2347B85/2347B85, BIOS CBET4000 4.8-704-gd837e66007 07/03/2018
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x26f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 0D0000000 mask FF0000000 write-combining
[ 0.000000] 2 base 100000000 mask F00000000 write-back
[ 0.000000] 3 base 200000000 mask F80000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0x7ff23 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576
[ 0.000000] BRK [0x236660000, 0x236660fff] PGTABLE
[ 0.000000] BRK [0x236661000, 0x236661fff] PGTABLE
[ 0.000000] BRK [0x236662000, 0x236662fff] PGTABLE
[ 0.000000] BRK [0x236663000, 0x236663fff] PGTABLE
[ 0.000000] BRK [0x236664000, 0x236664fff] PGTABLE
[ 0.000000] BRK [0x236665000, 0x236665fff] PGTABLE
[ 0.000000] BRK [0x236666000, 0x236666fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x36a19000-0x37503fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F66B0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x000000007FF490E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x000000007FF4C800 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x000000007FF49280 003577 (v03 COREv4 COREBOOT 20141018 INTL 20161222)
[ 0.000000] ACPI: FACS 0x000000007FF49240 000040
[ 0.000000] ACPI: FACS 0x000000007FF49240 000040
[ 0.000000] ACPI: SSDT 0x000000007FF4C900 002F80 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x000000007FF4F880 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x000000007FF4F8C0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x000000007FF4F900 00008C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DMAR 0x000000007FF4F990 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x000000007FF4FA40 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000026f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x26f5f7000-0x26f5fafff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000026f5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ff22fff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000026f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000026f5fffff]
[ 0.000000] On node 0 totalpages: 2028737
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8125 pages used for memmap
[ 0.000000] DMA32 zone: 519971 pages, LIFO batch:31
[ 0.000000] Normal zone: 23512 pages used for memmap
[ 0.000000] Normal zone: 1504768 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 319 pages
[ 0.000000] Reserving Intel graphics memory at [mem 0x80a00000-0x8e9fffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ff23000-0x8e9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8ea00000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[ 0.000000] e820: [mem 0x8ea00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x95/0x535 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1997015
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/sda4 rw iomem=relaxed intel_iommu=on acpi_backlight=native
[ 0.000000] DMAR: IOMMU enabled
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7886236K/8114948K available (10252K kernel code, 1290K rwdata, 3488K rodata, 1476K init, 608K bss, 228712K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 32653 entries in 128 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[ 0.000000] RCU priority boosting: priority 1 delay 500 ms.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[ 0.000000] Offload RCU callbacks from CPUs: (none).
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180313
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] DMAR: Host address width 36
[ 0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.000000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.000000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.000000] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.000000] x2apic enabled
[ 0.000000] Switched APIC routing to cluster x2apic.
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.016666] tsc: Fast TSC calibration using PIT
[ 0.019999] tsc: Detected 2693.799 MHz processor
[ 0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26d45c7a9a6, max_idle_ns: 440795299559 ns
[ 0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5389.08 BogoMIPS (lpj=8979330)
[ 0.019999] pid_max: default: 32768 minimum: 301
[ 0.019999] Security Framework initialized
[ 0.019999] Yama: becoming mindful.
[ 0.024305] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.024960] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.024991] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.025013] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.025215] CPU: Physical Processor ID: 0
[ 0.025216] CPU: Processor Core ID: 0
[ 0.025224] mce: CPU supports 9 MCE banks
[ 0.025240] CPU0: Thermal monitoring enabled (TM1)
[ 0.025251] process: using mwait in idle threads
[ 0.025254] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.025255] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.025256] Spectre V2 : Mitigation: Full generic retpoline
[ 0.025257] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.025257] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.025258] Speculative Store Bypass: Vulnerable
[ 0.025347] Freeing SMP alternatives memory: 28K
[ 0.025954] TSC deadline timer enabled
[ 0.025957] smpboot: CPU0: Intel(R) Core(TM) i7-3740QM CPU @ 2.70GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.033375] mce: [Hardware Error]: Machine check events logged
[ 0.033379] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 7: ee2000000003110a
[ 0.033390] mce: [Hardware Error]: TSC 0 ADDR feffff40 MISC 1040000086
[ 0.033411] mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1531223159 SOCKET 0 APIC 0 microcode 1f
[ 0.033414] mce: [Hardware Error]: Machine check events logged
[ 0.033415] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 8: ee2000000003110a
[ 0.033418] mce: [Hardware Error]: TSC 0 ADDR fefe8000 MISC 3880000086
[ 0.033422] mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1531223159 SOCKET 0 APIC 0 microcode 1f
[ 0.040014] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.040058] ... version: 3
[ 0.040059] ... bit width: 48
[ 0.040060] ... generic registers: 4
[ 0.040075] ... value mask: 0000ffffffffffff
[ 0.040076] ... max period: 00007fffffffffff
[ 0.040076] ... fixed-purpose events: 3
[ 0.040077] ... event mask: 000000070000000f
[ 0.043347] Hierarchical SRCU implementation.
[ 0.053568] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.056685] smp: Bringing up secondary CPUs ...
[ 0.080028] x86: Booting SMP configuration:
[ 0.080030] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.226354] smp: Brought up 1 node, 8 CPUs
[ 0.226354] smpboot: Max logical packages: 1
[ 0.226354] smpboot: Total of 8 processors activated (43118.65 BogoMIPS)
[ 0.227017] devtmpfs: initialized
[ 0.227017] x86/mm: Memory block size: 128MB
[ 0.227321] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.227321] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.227321] pinctrl core: initialized pinctrl subsystem
[ 0.227321] RTC time: 11:45:59, date: 07/10/18
[ 0.227321] NET: Registered protocol family 16
[ 0.227321] cpuidle: using governor ladder
[ 0.233347] cpuidle: using governor menu
[ 0.233415] ACPI: bus type PCI registered
[ 0.233417] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.233484] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.233487] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.233496] PCI: Using configuration type 1 for base access
[ 0.233522] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.234264] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.234264] ACPI: Added _OSI(Module Device)
[ 0.234264] ACPI: Added _OSI(Processor Device)
[ 0.234264] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.234264] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.234264] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.236678] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.237987] ACPI: EC: EC started
[ 0.237987] ACPI: EC: interrupt blocked
[ 0.238059] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.238061] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.238063] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.238063] ACPI: Interpreter enabled
[ 0.238081] ACPI: (supports S0 S3 S4 S5)
[ 0.238082] ACPI: Using IOAPIC for interrupt routing
[ 0.238103] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.238249] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.242580] ACPI: Power Resource [FPWR] (off)
[ 0.242993] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.242998] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.243063] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.243074] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.246691] PCI host bridge to bus 0000:00
[ 0.246693] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.246695] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.246696] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.246698] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.246699] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.246700] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.246701] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.246703] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.246704] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.246705] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.246706] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.246708] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.246709] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.246710] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.246711] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.246713] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.246714] pci_bus 0000:00: root bus resource [mem 0x8ea00001-0xefffffff window]
[ 0.246715] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.246717] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.246726] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.246833] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.246844] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit]
[ 0.246850] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.246855] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.246958] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.246983] pci 0000:00:14.0: reg 0x10: [mem 0xe1620000-0xe162ffff 64bit]
[ 0.247051] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.247137] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.247157] pci 0000:00:19.0: reg 0x10: [mem 0xe1600000-0xe161ffff]
[ 0.247166] pci 0000:00:19.0: reg 0x14: [mem 0xe1634000-0xe1634fff]
[ 0.247174] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f]
[ 0.247234] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.247312] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.247334] pci 0000:00:1a.0: reg 0x10: [mem 0xe1636000-0xe16363ff]
[ 0.247416] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.247501] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.247523] pci 0000:00:1b.0: reg 0x10: [mem 0xe1630000-0xe1633fff 64bit]
[ 0.247599] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.247690] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.247830] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.247860] pci 0000:00:1c.0: Enabling MPC IRBNCE
[ 0.247863] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 0.247955] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.248094] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.248119] pci 0000:00:1c.1: Enabling MPC IRBNCE
[ 0.248122] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled
[ 0.248214] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.248355] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.248380] pci 0000:00:1c.2: Enabling MPC IRBNCE
[ 0.248382] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
[ 0.248475] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.248497] pci 0000:00:1d.0: reg 0x10: [mem 0xe1637000-0xe16373ff]
[ 0.248580] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.248663] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.248842] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.248862] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087]
[ 0.248871] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093]
[ 0.248879] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f]
[ 0.248887] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097]
[ 0.248896] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.248905] pci 0000:00:1f.2: reg 0x24: [mem 0xe1635000-0xe16357ff]
[ 0.248949] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.249028] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.249047] pci 0000:00:1f.3: reg 0x10: [mem 0xe1638000-0xe16380ff 64bit]
[ 0.249068] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.249248] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
[ 0.249288] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.249340] pci 0000:01:00.0: reg 0x10: [mem 0xe1400000-0xe14000ff]
[ 0.249650] pci 0000:01:00.0: supports D1 D2
[ 0.249652] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.249849] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.249855] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff]
[ 0.250104] pci 0000:02:00.0: [8086:0085] type 00 class 0x028000
[ 0.250343] pci 0000:02:00.0: reg 0x10: [mem 0xe1500000-0xe1501fff 64bit]
[ 0.251120] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.251555] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.251564] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff]
[ 0.251651] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.251656] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.251661] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff]
[ 0.251670] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[ 0.251886] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.251952] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.252016] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.252079] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.252142] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.252205] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.252268] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.252330] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.253057] ACPI: EC: interrupt unblocked
[ 0.253074] ACPI: EC: event unblocked
[ 0.253081] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.253082] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.253139] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.253139] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.253139] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.253139] vgaarb: loaded
[ 0.253139] pps_core: LinuxPPS API ver. 1 registered
[ 0.253139] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.253139] PTP clock support registered
[ 0.253139] EDAC MC: Ver: 3.0.0
[ 0.253407] PCI: Using ACPI for IRQ routing
[ 0.254893] PCI: pci_cache_line_size set to 64 bytes
[ 0.255001] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.255002] e820: reserve RAM buffer [mem 0x7ff23000-0x7fffffff]
[ 0.255003] e820: reserve RAM buffer [mem 0x26f600000-0x26fffffff]
[ 0.255087] NetLabel: Initializing
[ 0.255088] NetLabel: domain hash size = 128
[ 0.255088] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.255101] NetLabel: unlabeled traffic allowed by default
[ 0.255105] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.255105] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.256688] clocksource: Switched to clocksource tsc-early
[ 0.267034] VFS: Disk quotas dquot_6.6.0
[ 0.267051] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.267118] pnp: PnP ACPI init
[ 0.267309] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.267311] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.267312] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.267314] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.267315] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.267317] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.267318] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.267320] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.267321] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.267323] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.267328] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.267884] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.267889] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.267924] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.267925] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.267929] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.267948] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.267982] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.268007] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.268034] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.268057] pnp: PnP ACPI: found 7 devices
[ 0.273692] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.273734] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.273742] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff]
[ 0.273753] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.273760] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff]
[ 0.273772] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.273775] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.273782] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff]
[ 0.273786] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[ 0.273795] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.273797] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.273798] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.273800] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.273801] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.273802] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.273804] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.273805] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.273806] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.273808] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.273809] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.273810] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.273812] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.273813] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.273814] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.273816] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.273817] pci_bus 0000:00: resource 20 [mem 0x8ea00001-0xefffffff window]
[ 0.273818] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.273820] pci_bus 0000:01: resource 1 [mem 0xe1400000-0xe14fffff]
[ 0.273821] pci_bus 0000:02: resource 1 [mem 0xe1500000-0xe15fffff]
[ 0.273823] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.273824] pci_bus 0000:03: resource 1 [mem 0xe0800000-0xe0ffffff]
[ 0.273825] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xe07fffff 64bit pref]
[ 0.273910] NET: Registered protocol family 2
[ 0.274036] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.274063] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.274175] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.274305] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.274334] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.274355] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.274402] NET: Registered protocol family 1
[ 0.274413] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.274989] PCI: CLS 64 bytes, default 64
[ 0.275022] Unpacking initramfs...
[ 0.411189] Freeing initrd memory: 11180K
[ 0.411227] DMAR: No RMRR found
[ 0.411228] DMAR: No ATSR found
[ 0.411268] DMAR: dmar0: Using Queued invalidation
[ 0.411274] DMAR: dmar1: Using Queued invalidation
[ 0.411285] DMAR: Setting RMRR:
[ 0.411286] DMAR: Prepare 0-16MiB unity mapping for LPC
[ 0.411372] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
[ 0.411459] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 0.411511] iommu: Adding device 0000:00:00.0 to group 0
[ 0.411518] iommu: Adding device 0000:00:02.0 to group 1
[ 0.411525] iommu: Adding device 0000:00:14.0 to group 2
[ 0.411532] iommu: Adding device 0000:00:19.0 to group 3
[ 0.411538] iommu: Adding device 0000:00:1a.0 to group 4
[ 0.411545] iommu: Adding device 0000:00:1b.0 to group 5
[ 0.411553] iommu: Adding device 0000:00:1c.0 to group 6
[ 0.411560] iommu: Adding device 0000:00:1c.1 to group 7
[ 0.411567] iommu: Adding device 0000:00:1c.2 to group 8
[ 0.411575] iommu: Adding device 0000:00:1d.0 to group 9
[ 0.411589] iommu: Adding device 0000:00:1f.0 to group 10
[ 0.411596] iommu: Adding device 0000:00:1f.2 to group 10
[ 0.411603] iommu: Adding device 0000:00:1f.3 to group 10
[ 0.411610] iommu: Adding device 0000:01:00.0 to group 11
[ 0.411617] iommu: Adding device 0000:02:00.0 to group 12
[ 0.411757] DMAR: DRHD: handling fault status reg 3
[ 0.411765] DMAR: [DMA Write] Request device [00:02.0] fault addr 80b40000 [fault reason 01] Present bit in root entry is clear
[ 0.412500] DMAR: DRHD: handling fault status reg 3
[ 0.412503] DMAR: [DMA Write] Request device [00:02.0] fault addr 80b80000 [fault reason 01] Present bit in root entry is clear
[ 0.412508] DMAR: DRHD: handling fault status reg 2
[ 0.412511] DMAR: [DMA Write] Request device [00:02.0] fault addr 80bbf000 [fault reason 01] Present bit in root entry is clear
[ 0.413205] Scanning for low memory corruption every 60 seconds
[ 0.413248] DMAR: DRHD: handling fault status reg 3
[ 0.413252] DMAR: [DMA Write] Request device [00:02.0] fault addr 80bc0000 [fault reason 01] Present bit in root entry is clear
[ 0.413256] DMAR: DRHD: handling fault status reg 3
[ 0.413259] DMAR: [DMA Write] Request device [00:02.0] fault addr 80bfc000 [fault reason 01] Present bit in root entry is clear
[ 0.413726] Initialise system trusted keyrings
[ 0.413738] Key type blacklist registered
[ 0.413787] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[ 0.413996] DMAR: DRHD: handling fault status reg 3
[ 0.414000] DMAR: [DMA Write] Request device [00:02.0] fault addr 80c00000 [fault reason 01] Present bit in root entry is clear
[ 0.414853] zbud: loaded
[ 0.415115] pstore: using lz4hc compression
[ 0.416054] Key type asymmetric registered
[ 0.416055] Asymmetric key parser 'x509' registered
[ 0.416079] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.416112] io scheduler noop registered
[ 0.416113] io scheduler deadline registered
[ 0.416148] io scheduler cfq registered (default)
[ 0.416149] io scheduler mq-deadline registered
[ 0.416150] io scheduler kyber registered
[ 0.416155] io scheduler bfq registered
[ 0.416977] pcieport 0000:00:1c.0: Signaling PME with IRQ 26
[ 0.416998] pcieport 0000:00:1c.1: Signaling PME with IRQ 27
[ 0.417019] pcieport 0000:00:1c.2: Signaling PME with IRQ 28
[ 0.417042] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.417108] vesafb: mode is 1600x900x32, linelength=6400, pages=0
[ 0.417109] vesafb: scrolling: redraw
[ 0.417111] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.417123] vesafb: framebuffer at 0xd0000000, mapped to 0x (ptrval), using 5632k, total 5632k
[ 0.417585] random: fast init done
[ 0.439400] random: crng init done
[ 0.453877] Console: switching to colour frame buffer device 200x56
[ 0.490358] fb0: VESA VGA frame buffer device
[ 0.490374] intel_idle: MWAIT substates: 0x21120
[ 0.490375] intel_idle: v0.4.1 model 0x3A
[ 0.490637] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.490687] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:28/PNP0C09:00/PNP0C0E:00/input/input0
[ 0.490700] ACPI: Sleep Button [SLPB]
[ 0.490732] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:28/PNP0C09:00/PNP0C0D:00/input/input1
[ 0.490738] ACPI: Lid Switch [LID]
[ 0.490773] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.490779] ACPI: Power Button [PWRF]
[ 0.505814] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.505816] ACPI: Thermal Zone [THM0] (50 C)
[ 0.506734] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.506735] ACPI: Thermal Zone [THM1] (27 C)
[ 0.506896] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.508224] intel_pstate: Intel P-state driver initializing
[ 0.508541] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.508986] NET: Registered protocol family 10
[ 0.516667] Segment Routing with IPv6
[ 0.516728] NET: Registered protocol family 17
[ 0.517735] RAS: Correctable Errors collector initialized.
[ 0.517793] microcode: sig=0x306a9, pf=0x10, revision=0x1f
[ 0.518005] microcode: Microcode Update Driver: v2.2.
[ 0.518024] sched_clock: Marking stable (517995368, 0)->(505149362, 12846006)
[ 0.518474] registered taskstats version 1
[ 0.518486] Loading compiled-in X.509 certificates
[ 0.518522] zswap: loaded using pool lzo/zbud
[ 0.524135] Key type big_key registered
[ 0.524646] Magic number: 10:159:782
[ 0.524737] hctosys: unable to open rtc device (rtc0)
[ 0.528582] Freeing unused kernel memory: 1476K
[ 0.528586] Write protecting the kernel read-only data: 16384k
[ 0.529502] Freeing unused kernel memory: 2016K
[ 0.532005] Freeing unused kernel memory: 608K
[ 0.556884] Linux agpgart interface v0.103
[ 0.593027] i915: unknown parameter 'enable_rc6' ignored
[ 0.593029] Setting dangerous option enable_fbc - tainting kernel
[ 0.593031] i915: unknown parameter 'semaphores' ignored
[ 0.593613] [drm] VT-d active for gfx access
[ 0.593615] checking generic (d0000000 580000) vs hw (d0000000 10000000)
[ 0.593616] fb: switching to inteldrmfb from VESA VGA
[ 0.593632] Console: switching to colour dummy device 80x25
[ 0.593700] [drm] Replacing VGA console driver
[ 0.593709] [drm] DMAR active, disabling use of stolen memory
[ 0.646715] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.646716] [drm] Driver supports precise vblank timestamp query.
[ 0.646986] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.740021] [drm] Initialized i915 1.6.0 20180308 for 0000:00:02.0 on minor 0
[ 0.740163] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.740291] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 0.973556] fbcon: inteldrmfb (fb0) is primary device
[ 0.977693] [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* uncleared fifo underrun on pipe A
[ 0.977763] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
[ 0.977834] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A
[ 0.977897] [drm:cpt_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun
[ 0.991506] Console: switching to colour frame buffer device 200x56
[ 1.016111] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.082952] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.084523] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.084581] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.091453] ACPI: bus type USB registered
[ 1.091474] usbcore: registered new interface driver usbfs
[ 1.091482] usbcore: registered new interface driver hub
[ 1.091517] usbcore: registered new device driver usb
[ 1.093052] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.093072] sdhci: Secure Digital Host Controller Interface driver
[ 1.093073] sdhci: Copyright(c) Pierre Ossman
[ 1.093147] SCSI subsystem initialized
[ 1.096120] ehci-pci: EHCI PCI platform driver
[ 1.096292] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.096298] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.096313] ehci-pci 0000:00:1a.0: debug port 2
[ 1.097636] libata version 3.00 loaded.
[ 1.098095] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 1.098626] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 1.098758] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[ 1.100269] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.100281] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe1636000
[ 1.100724] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.113349] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.113411] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[ 1.113412] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.113413] usb usb1: Product: EHCI Host Controller
[ 1.113414] usb usb1: Manufacturer: Linux 4.17.4-1-ARCH ehci_hcd
[ 1.113415] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.113611] hub 1-0:1.0: USB hub found
[ 1.113619] hub 1-0:1.0: 3 ports detected
[ 1.113805] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.113809] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.113821] ehci-pci 0000:00:1d.0: debug port 2
[ 1.117786] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.117796] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe1637000
[ 1.130017] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.130066] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[ 1.130068] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.130069] usb usb2: Product: EHCI Host Controller
[ 1.130070] usb usb2: Manufacturer: Linux 4.17.4-1-ARCH ehci_hcd
[ 1.130071] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.130218] hub 2-0:1.0: USB hub found
[ 1.130225] hub 2-0:1.0: 3 ports detected
[ 1.130449] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.130453] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.131575] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930
[ 1.131580] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.131702] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[ 1.131703] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.131704] usb usb3: Product: xHCI Host Controller
[ 1.131705] usb usb3: Manufacturer: Linux 4.17.4-1-ARCH xhci-hcd
[ 1.131706] usb usb3: SerialNumber: 0000:00:14.0
[ 1.131790] hub 3-0:1.0: USB hub found
[ 1.131801] hub 3-0:1.0: 4 ports detected
[ 1.131923] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.131925] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.131927] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.131956] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17
[ 1.131957] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.131958] usb usb4: Product: xHCI Host Controller
[ 1.131959] usb usb4: Manufacturer: Linux 4.17.4-1-ARCH xhci-hcd
[ 1.131960] usb usb4: SerialNumber: 0000:00:14.0
[ 1.132036] hub 4-0:1.0: USB hub found
[ 1.132047] hub 4-0:1.0: 4 ports detected
[ 1.132198] ahci 0000:00:1f.2: version 3.0
[ 1.132322] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.142452] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
[ 1.142455] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.143170] scsi host0: ahci
[ 1.143452] scsi host1: ahci
[ 1.143594] scsi host2: ahci
[ 1.143822] scsi host3: ahci
[ 1.143957] scsi host4: ahci
[ 1.144080] scsi host5: ahci
[ 1.144123] ata1: SATA max UDMA/133 abar m2048@0xe1635000 port 0xe1635100 irq 31
[ 1.144125] ata2: SATA max UDMA/133 abar m2048@0xe1635000 port 0xe1635180 irq 31
[ 1.144127] ata3: SATA max UDMA/133 abar m2048@0xe1635000 port 0xe1635200 irq 31
[ 1.144128] ata4: DUMMY
[ 1.144130] ata5: SATA max UDMA/133 abar m2048@0xe1635000 port 0xe1635300 irq 31
[ 1.144130] ata6: DUMMY
[ 1.410080] tsc: Refined TSC clocksource calibration: 2693.879 MHz
[ 1.410096] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d4a7f100e, max_idle_ns: 440795249411 ns
[ 1.410150] clocksource: Switched to clocksource tsc
[ 1.443458] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.457343] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.457643] ata1.00: supports DRM functions and may not be fully accessible
[ 1.458143] ata1.00: disabling queued TRIM support
[ 1.458148] ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0DB6Q, max UDMA/133
[ 1.458152] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.458927] ata1.00: supports DRM functions and may not be fully accessible
[ 1.459345] ata1.00: disabling queued TRIM support
[ 1.459816] ata1.00: configured for UDMA/133
[ 1.460073] usb 3-4: new high-speed USB device number 2 using xhci_hcd
[ 1.460095] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.470393] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DB6Q PQ: 0 ANSI: 5
[ 1.590796] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.590802] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.591369] hub 1-1:1.0: USB hub found
[ 1.591507] hub 1-1:1.0: 6 ports detected
[ 1.603091] usb 3-4: New USB device found, idVendor=413c, idProduct=818e, bcdDevice= 0.00
[ 1.603096] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.603099] usb 3-4: Product: DW5560
[ 1.603102] usb 3-4: Manufacturer: Dell
[ 1.603104] usb 3-4: SerialNumber: 4F06E142AECAC2M0
[ 1.607158] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.607164] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.607755] hub 2-1:1.0: USB hub found
[ 1.607875] hub 2-1:1.0: 8 ports detected
[ 1.784257] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.785849] ata2.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133
[ 1.785854] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.787525] ata2.00: configured for UDMA/133
[ 1.788162] scsi 1:0:0:0: Direct-Access ATA HGST HTS541010A9 A560 PQ: 0 ANSI: 5
[ 1.870113] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.974062] usb 1-1.1: New USB device found, idVendor=17ef, idProduct=1003, bcdDevice= 1.00
[ 1.974068] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.974071] usb 1-1.1: Product: Integrated Smart Card Reader
[ 1.974074] usb 1-1.1: Manufacturer: Lenovo
[ 2.046775] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
[ 2.101119] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.145437] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01
[ 2.145442] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.145445] usb 1-1.3: Product: Biometric Coprocessor
[ 2.145448] usb 1-1.3: Manufacturer: Auth
[ 2.216780] usb 1-1.4: new full-speed USB device number 5 using ehci-pci
[ 2.318045] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12
[ 2.318051] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.318054] usb 1-1.4: Product: BCM20702A0
[ 2.318056] usb 1-1.4: Manufacturer: Broadcom Corp
[ 2.318059] usb 1-1.4: SerialNumber: 0C84DCD85B24
[ 2.393442] usb 1-1.6: new high-speed USB device number 6 using ehci-pci
[ 2.414374] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.425477] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 2.425492] sd 0:0:0:0: [sda] Write Protect is off
[ 2.425495] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.425515] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.425540] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.425543] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 2.425564] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.425568] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.425599] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.426947] sda: sda1 sda2 sda3 sda4
[ 2.428013] sd 0:0:0:0: [sda] supports TCG Opal
[ 2.428018] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.498072] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2db, bcdDevice= 5.64
[ 2.498078] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.498081] usb 1-1.6: Product: Integrated Camera
[ 2.498084] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.714080] sdb: sdb1
[ 2.715024] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.143343] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 3.367984] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[ 3.414365] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[ 3.430731] systemd[1]: Detected architecture x86-64.
[ 3.436058] systemd[1]: Set hostname to <ThinkPad-T430>.
[ 3.705367] systemd[1]: Reached target Login Prompts.
[ 3.705553] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 3.705820] systemd[1]: Listening on LVM2 poll daemon socket.
[ 3.705964] systemd[1]: Listening on udev Control Socket.
[ 3.707766] systemd[1]: Created slice system-getty.slice.
[ 3.708049] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.708151] systemd[1]: Reached target Swap.
[ 3.737934] acpi_call: loading out-of-tree module taints kernel.
[ 3.752388] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.752418] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 3.758343] EXT4-fs (sda4): re-mounted. Opts: data=ordered
[ 3.758488] i2c /dev entries driver
[ 3.767693] fuse init (API version 7.26)
[ 3.796616] intel_rapl: Found RAPL domain package
[ 3.796617] intel_rapl: Found RAPL domain core
[ 3.796618] intel_rapl: Found RAPL domain uncore
[ 3.807568] usbcore: registered new interface driver xpad
[ 3.833460] systemd-journald[318]: Received request to flush runtime journal from PID 1
[ 4.084490] rtc_cmos 00:03: RTC can wake from S4
[ 4.084672] rtc_cmos 00:03: registered as rtc0
[ 4.084700] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 4.096199] ACPI: Battery Slot [BAT0] (battery present)
[ 4.096349] ACPI: Battery Slot [BAT1] (battery absent)
[ 4.143921] ACPI: AC Adapter [AC] (off-line)
[ 4.146228] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 4.146229] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 4.146230] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 4.146231] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 4.146502] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 4.146504] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 4.146577] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 4.151131] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 4.155002] Non-volatile memory driver v1.3
[ 4.156950] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 4.162094] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 4.162095] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 4.162095] thinkpad_acpi: ThinkPad BIOS CBET4000 4.8-704-gd837e66007, EC G1HT32WW-3.22
[ 4.162096] thinkpad_acpi: Lenovo ThinkPad T430, model 2347B85
[ 4.162592] thinkpad_acpi: radio switch found; radios are enabled
[ 4.162702] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 4.162714] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 4.162715] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 4.165075] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 4.166612] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 4.166686] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 4.168540] thinkpad_acpi: battery 1 registered (start 0, stop 0)
[ 4.168546] battery: new extension: ThinkPad Battery Extension
[ 4.168594] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
[ 4.268322] iTCO_vendor_support: vendor-support=0
[ 4.268950] gpio_ich: GPIO from 436 to 511 on gpio_ich
[ 4.269217] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.269246] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 4.269314] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.285377] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 4.399358] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 28:d2:44:12:10:56
[ 4.399371] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 4.399406] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 4.399690] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 4.400764] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.400959] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 4.409066] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 4.426893] cryptd: max_cpu_qlen set to 1000
[ 4.433094] AVX version of gcm_enc/dec engaged.
[ 4.433095] AES CTR mode by8 optimization enabled
[ 4.445968] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3202: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 4.445971] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.445973] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 4.445975] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 4.445976] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 4.445978] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 4.445980] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 4.445981] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 4.466572] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.466631] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 4.466873] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.466928] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.466983] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 4.467038] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 4.467091] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 4.467143] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 4.467195] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 4.477004] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 4.477929] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 4.477934] cfg80211: failed to load regulatory.db
[ 4.495064] Intel(R) Wireless WiFi driver for Linux
[ 4.495066] Copyright(c) 2003- 2015 Intel Corporation
[ 4.499107] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 4.624020] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG enabled
[ 4.624025] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 4.624027] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 4.624032] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[ 4.662079] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 4.673939] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 4.813886] device-mapper: uevent: version 1.0.3
[ 4.813943] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[ 4.831786] NET: Registered protocol family 38
[ 4.843413] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
[ 4.850361] AVX2 instructions are not detected.
[ 4.903497] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262
[ 4.903503] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 4.941171] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 4.944411] mousedev: PS/2 mouse device common for all mice
[ 4.978746] AVX2 instructions are not detected.
[ 5.407020] cdc_acm 3-4:1.1: ttyACM0: USB ACM device
[ 5.407295] cdc_acm 3-4:1.3: ttyACM1: USB ACM device
[ 5.407539] cdc_acm 3-4:1.9: ttyACM2: USB ACM device
[ 5.411563] usbcore: registered new interface driver cdc_acm
[ 5.411565] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 5.414384] cdc_wdm 3-4:1.5: cdc-wdm0: USB WDM device
[ 5.414456] cdc_wdm 3-4:1.8: cdc-wdm1: USB WDM device
[ 5.414494] usbcore: registered new interface driver cdc_wdm
[ 5.428413] usbcore: registered new interface driver cdc_ncm
[ 5.459482] cdc_mbim 3-4:1.6: cdc-wdm2: USB WDM device
[ 5.459654] cdc_mbim 3-4:1.6 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-4, CDC MBIM, 42:90:05:ac:84:17
[ 5.459710] usbcore: registered new interface driver cdc_mbim
[ 5.461326] cdc_mbim 3-4:1.6 wwp0s20u4i6: renamed from wwan0
[ 5.564933] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 5.715729] media: Linux media interface: v0.10
[ 5.731273] Linux video capture interface: v2.00
[ 5.755015] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input17
[ 5.771118] Bluetooth: Core ver 2.22
[ 5.771136] NET: Registered protocol family 31
[ 5.771136] Bluetooth: HCI device and connection manager initialized
[ 5.771140] Bluetooth: HCI socket layer initialized
[ 5.771142] Bluetooth: L2CAP socket layer initialized
[ 5.771149] Bluetooth: SCO socket layer initialized
[ 5.779049] usbcore: registered new interface driver btusb
[ 5.817629] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2db)
[ 5.824138] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.824140] Bluetooth: BNEP filters: protocol multicast
[ 5.824143] Bluetooth: BNEP socket layer initialized
[ 5.824779] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 5.824782] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 5.824783] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 5.824785] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 5.824866] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input18
[ 5.824987] usbcore: registered new interface driver uvcvideo
[ 5.824988] USB Video Class driver (1.1.1)
[ 5.888557] Bluetooth: hci0: BCM: chip id 63
[ 5.889558] Bluetooth: hci0: BCM: features 0x07
[ 5.895430] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 5.905593] Bluetooth: hci0: BCM20702A
[ 5.906578] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 5.906725] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
[ 5.906727] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
[ 6.147265] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 6.156991] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 6.169841] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 6.464987] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 6.546242] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 6.572505] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 6.868710] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 6.957569] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 6.959287] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 6.965395] tun: Universal TUN/TAP device driver, 1.6
[ 6.966039] virbr0: port 1(virbr0-nic) entered blocking state
[ 6.966097] virbr0: port 1(virbr0-nic) entered disabled state
[ 6.966147] device virbr0-nic entered promiscuous mode
[ 7.084294] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 7.107873] virbr0: port 1(virbr0-nic) entered blocking state
[ 7.107875] virbr0: port 1(virbr0-nic) entered listening state
[ 7.151622] virbr0: port 1(virbr0-nic) entered disabled state
[ 7.154201] virbr1: port 1(virbr1-nic) entered blocking state
[ 7.154214] virbr1: port 1(virbr1-nic) entered disabled state
[ 7.154286] device virbr1-nic entered promiscuous mode
[ 7.216690] virbr1: port 1(virbr1-nic) entered blocking state
[ 7.216694] virbr1: port 1(virbr1-nic) entered listening state
[ 7.263429] virbr1: port 1(virbr1-nic) entered disabled state
[ 7.948855] Bluetooth: RFCOMM TTY layer initialized
[ 7.948861] Bluetooth: RFCOMM socket layer initialized
[ 7.948866] Bluetooth: RFCOMM ver 1.11
[ 8.998623] Adding 524284k swap on /var/lib/systemd-swap/swapfc/1. Priority:-2 extents:56 across:57556988k SSFS
[ 10.399066] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 10.695496] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 10.776206] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 14.065457] wlp2s0: authenticate with 76:da:38:06:df:d9
[ 14.067804] wlp2s0: send auth to 76:da:38:06:df:d9 (try 1/3)
[ 14.131835] wlp2s0: authenticated
[ 14.131968] wlp2s0: waiting for beacon from 76:da:38:06:df:d9
[ 14.230017] wlp2s0: associate with 76:da:38:06:df:d9 (try 1/3)
[ 14.244950] wlp2s0: RX AssocResp from 76:da:38:06:df:d9 (capab=0x411 status=0 aid=1)
[ 14.265800] wlp2s0: associated
[ 14.274906] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 14.330805] wlp2s0: Limiting TX power to 17 (20 - 3) dBm as advertised by 76:da:38:06:df:d9
[ 15.791193] rfkill: input handler disabled
[ 19.429023] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[ 19.527746] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[ 25.223563] usb 1-1.4: USB disconnect, device number 5