blob: 43c70aba61af9f2026e98b978a8a9aee6ed1d2d3 [file] [log] [blame]
[ 0.000000] Linux version 5.10.0-19-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.149-2 (2022-10-21)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.10.0-19-amd64 root=/dev/mapper/red--vg-root ro iomem=relaxed
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff00fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ff01000-0x00000000829fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047d5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: LENOVO 2349NY1/2349NY1, BIOS CBET4000 4.16-1239-gd5c31acee4 05/30/2022
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2195.069 MHz processor
[ 0.000842] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000846] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000852] last_pfn = 0x47d600 max_arch_pfn = 0x400000000
[ 0.000857] MTRR default type: uncachable
[ 0.000858] MTRR fixed ranges enabled:
[ 0.000860] 00000-9FFFF write-back
[ 0.000861] A0000-BFFFF uncachable
[ 0.000863] C0000-FFFFF write-back
[ 0.000863] MTRR variable ranges enabled:
[ 0.000865] 0 base 000000000 mask F80000000 write-back
[ 0.000867] 1 base 090000000 mask FF0000000 write-combining
[ 0.000868] 2 base 100000000 mask F00000000 write-back
[ 0.000869] 3 base 200000000 mask E00000000 write-back
[ 0.000871] 4 base 400000000 mask F80000000 write-back
[ 0.000872] 5 base 47D600000 mask FFFE00000 uncachable
[ 0.000873] 6 base 47D800000 mask FFF800000 uncachable
[ 0.000874] 7 base 47E000000 mask FFE000000 uncachable
[ 0.000875] 8 disabled
[ 0.000876] 9 disabled
[ 0.001243] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001848] last_pfn = 0x7ff01 max_arch_pfn = 0x400000000
[ 0.016634] RAMDISK: [mem 0x32639000-0x35313fff]
[ 0.016638] ACPI: Early table checksum verification disabled
[ 0.016642] ACPI: RSDP 0x00000000000F6770 000024 (v02 COREv4)
[ 0.016648] ACPI: XSDT 0x000000007FF2B0E0 000054 (v01 COREv4 COREBOOT 00000000 CORE 20210331)
[ 0.016655] ACPI: FACP 0x000000007FF2EB70 000114 (v06 COREv4 COREBOOT 00000000 CORE 20210331)
[ 0.016663] ACPI: DSDT 0x000000007FF2B280 0038E4 (v02 COREv4 COREBOOT 20141018 INTL 20210331)
[ 0.016668] ACPI: FACS 0x000000007FF2B240 000040
[ 0.016672] ACPI: FACS 0x000000007FF2B240 000040
[ 0.016677] ACPI: SSDT 0x000000007FF2EC90 002919 (v02 COREv4 COREBOOT 0000002A CORE 20210331)
[ 0.016681] ACPI: MCFG 0x000000007FF315B0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20210331)
[ 0.016686] ACPI: TCPA 0x000000007FF315F0 000032 (v02 COREv4 COREBOOT 00000000 CORE 20210331)
[ 0.016691] ACPI: APIC 0x000000007FF31630 00008C (v03 COREv4 COREBOOT 00000000 CORE 20210331)
[ 0.016696] ACPI: HPET 0x000000007FF316C0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20210331)
[ 0.016700] ACPI: Reserving FACP table memory at [mem 0x7ff2eb70-0x7ff2ec83]
[ 0.016702] ACPI: Reserving DSDT table memory at [mem 0x7ff2b280-0x7ff2eb63]
[ 0.016703] ACPI: Reserving FACS table memory at [mem 0x7ff2b240-0x7ff2b27f]
[ 0.016705] ACPI: Reserving FACS table memory at [mem 0x7ff2b240-0x7ff2b27f]
[ 0.016706] ACPI: Reserving SSDT table memory at [mem 0x7ff2ec90-0x7ff315a8]
[ 0.016708] ACPI: Reserving MCFG table memory at [mem 0x7ff315b0-0x7ff315eb]
[ 0.016709] ACPI: Reserving TCPA table memory at [mem 0x7ff315f0-0x7ff31621]
[ 0.016711] ACPI: Reserving APIC table memory at [mem 0x7ff31630-0x7ff316bb]
[ 0.016712] ACPI: Reserving HPET table memory at [mem 0x7ff316c0-0x7ff316f7]
[ 0.016723] ACPI: Local APIC address 0xfee00000
[ 0.016781] No NUMA configuration found
[ 0.016783] Faking a node at [mem 0x0000000000000000-0x000000047d5fffff]
[ 0.016796] NODE_DATA(0) allocated [mem 0x47d5c9000-0x47d5f2fff]
[ 0.017389] Zone ranges:
[ 0.017391] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.017393] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.017395] Normal [mem 0x0000000100000000-0x000000047d5fffff]
[ 0.017397] Device empty
[ 0.017399] Movable zone start for each node
[ 0.017404] Early memory node ranges
[ 0.017405] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.017407] node 0: [mem 0x0000000000100000-0x000000007ff00fff]
[ 0.017409] node 0: [mem 0x0000000100000000-0x000000047d5fffff]
[ 0.017413] Initmem setup node 0 [mem 0x0000000000001000-0x000000047d5fffff]
[ 0.017415] On node 0 totalpages: 4183199
[ 0.017417] DMA zone: 64 pages used for memmap
[ 0.017418] DMA zone: 21 pages reserved
[ 0.017419] DMA zone: 3998 pages, LIFO batch:0
[ 0.017421] DMA32 zone: 8125 pages used for memmap
[ 0.017422] DMA32 zone: 519937 pages, LIFO batch:63
[ 0.017423] Normal zone: 57176 pages used for memmap
[ 0.017424] Normal zone: 3659264 pages, LIFO batch:63
[ 0.017428] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.017476] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.024270] On node 0, zone Normal: 255 pages in unavailable ranges
[ 0.024416] On node 0, zone Normal: 10752 pages in unavailable ranges
[ 0.024426] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff]
[ 0.024641] ACPI: PM-Timer IO Port: 0x508
[ 0.024644] ACPI: Local APIC address 0xfee00000
[ 0.024663] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.024666] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.024668] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.024670] ACPI: IRQ0 used by override.
[ 0.024672] ACPI: IRQ9 used by override.
[ 0.024674] Using ACPI (MADT) for SMP configuration information
[ 0.024677] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.024682] TSC deadline timer available
[ 0.024684] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.024698] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.024700] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.024702] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.024703] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.024705] PM: hibernation: Registered nosave memory: [mem 0x7ff01000-0x829fffff]
[ 0.024707] PM: hibernation: Registered nosave memory: [mem 0x82a00000-0xefffffff]
[ 0.024708] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.024709] PM: hibernation: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
[ 0.024711] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.024712] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xffffffff]
[ 0.024714] [mem 0x82a00000-0xefffffff] available for PCI devices
[ 0.024716] Booting paravirtualized kernel on bare hardware
[ 0.024720] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.029884] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.030130] percpu: Embedded 58 pages/cpu s200664 r8192 d28712 u262144
[ 0.030137] pcpu-alloc: s200664 r8192 d28712 u262144 alloc=1*2097152
[ 0.030139] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.030176] Built 1 zonelists, mobility grouping on. Total pages: 4117813
[ 0.030177] Policy zone: Normal
[ 0.030180] Kernel command line: BOOT_IMAGE=/vmlinuz-5.10.0-19-amd64 root=/dev/mapper/red--vg-root ro iomem=relaxed
[ 0.031233] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.031726] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.031847] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.049880] Memory: 2115000K/16732796K available (12295K kernel code, 2536K rwdata, 7584K rodata, 2648K init, 3444K bss, 435676K reserved, 0K cma-reserved)
[ 0.050205] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.050227] Kernel/User page tables isolation: enabled
[ 0.050247] ftrace: allocating 36480 entries in 143 pages
[ 0.073304] ftrace: allocated 143 pages with 5 groups
[ 0.073462] rcu: Hierarchical RCU implementation.
[ 0.073465] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.073467] Rude variant of Tasks RCU enabled.
[ 0.073468] Tracing variant of Tasks RCU enabled.
[ 0.073469] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.073471] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.079101] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[ 0.079327] random: crng init done
[ 0.079351] spurious 8259A interrupt: IRQ7.
[ 0.079671] Console: colour dummy device 80x25
[ 0.079887] printk: console [tty0] enabled
[ 0.079907] ACPI: Core revision 20200925
[ 0.079987] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.080005] APIC: Switch to symmetric I/O mode setup
[ 0.080078] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.080478] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.100005] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa400bcc32, max_idle_ns: 440795223142 ns
[ 0.100012] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.13 BogoMIPS (lpj=8780276)
[ 0.100019] pid_max: default: 32768 minimum: 301
[ 0.100054] LSM: Security Framework initializing
[ 0.100067] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.100099] AppArmor: AppArmor initialized
[ 0.100103] TOMOYO Linux initialized
[ 0.100150] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.100184] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.100506] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.100524] process: using mwait in idle threads
[ 0.100529] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.100532] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.100537] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.100541] Spectre V2 : Mitigation: Retpolines
[ 0.100544] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.100547] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.100550] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.100553] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.100557] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.100560] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.100565] MDS: Mitigation: Clear CPU buffers
[ 0.100568] MMIO Stale Data: Unknown: No mitigations
[ 0.100570] SRBDS: Vulnerable: No microcode
[ 0.113859] Freeing SMP alternatives memory: 32K
[ 0.115878] smpboot: CPU0: Intel(R) Core(TM) i7-3632QM CPU @ 2.20GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.116010] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.116010] ... version: 3
[ 0.116010] ... bit width: 48
[ 0.116010] ... generic registers: 4
[ 0.116010] ... value mask: 0000ffffffffffff
[ 0.116010] ... max period: 00007fffffffffff
[ 0.116010] ... fixed-purpose events: 3
[ 0.116010] ... event mask: 000000070000000f
[ 0.116010] rcu: Hierarchical SRCU implementation.
[ 0.116010] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.116010] smp: Bringing up secondary CPUs ...
[ 0.116010] x86: Booting SMP configuration:
[ 0.116010] .... node #0, CPUs: #1
[ 0.116033] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.116192] #2 #3 #4 #5 #6 #7
[ 0.128082] smp: Brought up 1 node, 8 CPUs
[ 0.128082] smpboot: Max logical packages: 1
[ 0.128082] smpboot: Total of 8 processors activated (35121.10 BogoMIPS)
[ 0.152741] node 0 deferred pages initialised in 24ms
[ 0.156066] devtmpfs: initialized
[ 0.156067] x86/mm: Memory block size: 128MB
[ 0.157401] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.157401] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.157401] pinctrl core: initialized pinctrl subsystem
[ 0.157401] NET: Registered protocol family 16
[ 0.157401] audit: initializing netlink subsys (disabled)
[ 0.157401] audit: type=2000 audit(1671011552.076:1): state=initialized audit_enabled=0 res=1
[ 0.157401] thermal_sys: Registered thermal governor 'fair_share'
[ 0.157401] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.157401] thermal_sys: Registered thermal governor 'step_wise'
[ 0.157401] thermal_sys: Registered thermal governor 'user_space'
[ 0.157401] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.157401] cpuidle: using governor ladder
[ 0.157401] cpuidle: using governor menu
[ 0.157401] ACPI: bus type PCI registered
[ 0.157401] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.157401] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.157401] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.157401] PCI: Using configuration type 1 for base access
[ 0.157401] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.157401] Kprobes globally optimized
[ 0.157401] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.352473] ACPI: Added _OSI(Module Device)
[ 0.352473] ACPI: Added _OSI(Processor Device)
[ 0.352473] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.352473] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.352473] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.352473] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.352473] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.355337] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.356629] ACPI: EC: EC started
[ 0.356632] ACPI: EC: interrupt blocked
[ 0.356923] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.356927] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
[ 0.356930] ACPI: Interpreter enabled
[ 0.356949] ACPI: (supports S0 S3 S4 S5)
[ 0.356952] ACPI: Using IOAPIC for interrupt routing
[ 0.356974] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.357128] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.361257] ACPI: Power Resource [FPWR] (off)
[ 0.361602] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.361610] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.361665] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.361677] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.361768] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6dff])
[ 0.361950] PCI host bridge to bus 0000:00
[ 0.361954] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.361958] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.361961] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.361964] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.361967] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.361971] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.361974] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.361977] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.361980] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.361983] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.361987] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.361990] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.361993] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.361996] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.362000] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.362003] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window]
[ 0.362006] pci_bus 0000:00: root bus resource [mem 0x47d600001-0xfffffffff window]
[ 0.362010] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.362013] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.362028] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.362141] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.362154] pci 0000:00:02.0: reg 0x10: [mem 0x82c00000-0x82ffffff 64bit]
[ 0.362163] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.362169] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x103f]
[ 0.362291] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.362313] pci 0000:00:14.0: reg 0x10: [mem 0x83820000-0x8382ffff 64bit]
[ 0.362388] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.362531] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.362615] pci 0000:00:16.0: reg 0x10: [mem 0x83839000-0x8383900f 64bit]
[ 0.362953] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.363096] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.363113] pci 0000:00:19.0: reg 0x10: [mem 0x83800000-0x8381ffff]
[ 0.363123] pci 0000:00:19.0: reg 0x14: [mem 0x83834000-0x83834fff]
[ 0.363133] pci 0000:00:19.0: reg 0x18: [io 0x1040-0x105f]
[ 0.363198] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.363282] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.363300] pci 0000:00:1a.0: reg 0x10: [mem 0x83836000-0x838363ff]
[ 0.363390] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.363489] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.363509] pci 0000:00:1b.0: reg 0x10: [mem 0x83830000-0x83833fff 64bit]
[ 0.363594] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.363707] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.363861] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.363994] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.364147] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.364284] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.364465] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.364573] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.364592] pci 0000:00:1d.0: reg 0x10: [mem 0x83837000-0x838373ff]
[ 0.364682] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.364781] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.364975] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.364991] pci 0000:00:1f.2: reg 0x10: [io 0x1080-0x1087]
[ 0.365000] pci 0000:00:1f.2: reg 0x14: [io 0x1090-0x1093]
[ 0.365010] pci 0000:00:1f.2: reg 0x18: [io 0x1088-0x108f]
[ 0.365019] pci 0000:00:1f.2: reg 0x1c: [io 0x1094-0x1097]
[ 0.365029] pci 0000:00:1f.2: reg 0x20: [io 0x1060-0x107f]
[ 0.365039] pci 0000:00:1f.2: reg 0x24: [mem 0x83835000-0x838357ff]
[ 0.365084] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.365171] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.365192] pci 0000:00:1f.3: reg 0x10: [mem 0x83838000-0x838380ff 64bit]
[ 0.365215] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.365452] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.365466] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
[ 0.365519] pci 0000:01:00.0: reg 0x10: [mem 0x82a00000-0x82a000ff]
[ 0.365849] pci 0000:01:00.0: supports D1 D2
[ 0.365852] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.366095] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.366106] pci 0000:00:1c.0: bridge window [mem 0x82a00000-0x82afffff]
[ 0.366237] pci 0000:02:00.0: [168c:002a] type 00 class 0x028000
[ 0.366297] pci 0000:02:00.0: reg 0x10: [mem 0x82b00000-0x82b0ffff 64bit]
[ 0.366600] pci 0000:02:00.0: supports D1
[ 0.366603] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.366794] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.366817] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.366824] pci 0000:00:1c.1: bridge window [mem 0x82b00000-0x82bfffff]
[ 0.366894] pci 0000:00:1c.2: PCI bridge to [bus 03-0b]
[ 0.366900] pci 0000:00:1c.2: bridge window [io 0x2000-0x3fff]
[ 0.366906] pci 0000:00:1c.2: bridge window [mem 0x83000000-0x837fffff]
[ 0.366914] pci 0000:00:1c.2: bridge window [mem 0x47d600000-0x48d5fffff 64bit pref]
[ 0.367104] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.367161] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.367215] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.367268] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.367321] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.367373] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.367425] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.367479] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.368269] ACPI: EC: interrupt unblocked
[ 0.368272] ACPI: EC: event unblocked
[ 0.368279] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.368281] ACPI: EC: GPE=0x11
[ 0.368285] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC initialization complete
[ 0.368288] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events
[ 0.368353] iommu: Default domain type: Translated
[ 0.368372] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.368372] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.368372] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.368372] vgaarb: loaded
[ 0.368372] EDAC MC: Ver: 3.0.0
[ 0.368372] NetLabel: Initializing
[ 0.368372] NetLabel: domain hash size = 128
[ 0.368372] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.368372] NetLabel: unlabeled traffic allowed by default
[ 0.368372] PCI: Using ACPI for IRQ routing
[ 0.369868] PCI: pci_cache_line_size set to 64 bytes
[ 0.369874] pci 0000:00:1c.2: can't claim BAR 15 [mem 0x47d600000-0x48d5fffff 64bit pref]: no compatible bridge window
[ 0.369879] pci 0000:00:1c.2: [mem 0x47d600000-0x48d5fffff 64bit pref] clipped to [mem 0x47d600001-0x48d5fffff 64bit pref]
[ 0.369885] pci 0000:00:1c.2: bridge window [mem 0x47d600001-0x48d5fffff 64bit pref]
[ 0.369959] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.369961] e820: reserve RAM buffer [mem 0x7ff01000-0x7fffffff]
[ 0.369962] e820: reserve RAM buffer [mem 0x47d600000-0x47fffffff]
[ 0.369986] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.369995] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.372040] clocksource: Switched to clocksource tsc-early
[ 0.383888] VFS: Disk quotas dquot_6.6.0
[ 0.383914] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.384058] AppArmor: AppArmor Filesystem Enabled
[ 0.384080] pnp: PnP ACPI init
[ 0.384286] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.384290] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.384293] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.384296] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.384300] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.384303] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.384306] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.384309] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.384312] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.384316] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.384324] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.384779] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.384787] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.384828] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.384831] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.384837] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.384858] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.384888] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.384916] pnp 00:05: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[ 0.384947] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.384962] pnp: PnP ACPI: found 7 devices
[ 0.390934] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.391007] NET: Registered protocol family 2
[ 0.391181] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.393855] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.393970] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.394232] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.394328] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.394389] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.394445] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.394519] NET: Registered protocol family 1
[ 0.394527] NET: Registered protocol family 44
[ 0.394542] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.394551] pci 0000:00:1c.0: bridge window [mem 0x82a00000-0x82afffff]
[ 0.394561] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.394567] pci 0000:00:1c.1: bridge window [mem 0x82b00000-0x82bfffff]
[ 0.394578] pci 0000:00:1c.2: PCI bridge to [bus 03-0b]
[ 0.394582] pci 0000:00:1c.2: bridge window [io 0x2000-0x3fff]
[ 0.394589] pci 0000:00:1c.2: bridge window [mem 0x83000000-0x837fffff]
[ 0.394595] pci 0000:00:1c.2: bridge window [mem 0x47d600001-0x48d5fffff 64bit pref]
[ 0.394605] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.394608] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.394611] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.394613] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.394616] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 0.394619] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[ 0.394622] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.394625] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.394628] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.394631] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.394634] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.394637] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.394640] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.394643] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.394646] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.394649] pci_bus 0000:00: resource 19 [mem 0x82a00000-0xefffffff window]
[ 0.394652] pci_bus 0000:00: resource 20 [mem 0x47d600001-0xfffffffff window]
[ 0.394655] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.394658] pci_bus 0000:01: resource 1 [mem 0x82a00000-0x82afffff]
[ 0.394661] pci_bus 0000:02: resource 1 [mem 0x82b00000-0x82bfffff]
[ 0.394663] pci_bus 0000:03: resource 0 [io 0x2000-0x3fff]
[ 0.394666] pci_bus 0000:03: resource 1 [mem 0x83000000-0x837fffff]
[ 0.394669] pci_bus 0000:03: resource 2 [mem 0x47d600001-0x48d5fffff 64bit pref]
[ 0.394742] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.395303] PCI: CLS 64 bytes, default 64
[ 0.395360] Trying to unpack rootfs image as initramfs...
[ 1.257471] Freeing initrd memory: 45932K
[ 1.257651] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.257655] software IO TLB: mapped [mem 0x000000007bf01000-0x000000007ff01000] (64MB)
[ 1.258271] Initialise system trusted keyrings
[ 1.258283] Key type blacklist registered
[ 1.258339] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 1.259564] zbud: loaded
[ 1.259748] integrity: Platform Keyring initialized
[ 1.259753] Key type asymmetric registered
[ 1.259756] Asymmetric key parser 'x509' registered
[ 1.259765] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.259810] io scheduler mq-deadline registered
[ 1.260600] pcieport 0000:00:1c.0: PME: Signaling with IRQ 24
[ 1.260810] pcieport 0000:00:1c.1: PME: Signaling with IRQ 25
[ 1.261013] pcieport 0000:00:1c.2: PME: Signaling with IRQ 26
[ 1.261047] pcieport 0000:00:1c.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 1.261183] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.261198] intel_idle: MWAIT substates: 0x21120
[ 1.261200] intel_idle: v0.5.1 model 0x3A
[ 1.261623] intel_idle: Local APIC timer is reliable in all C-states
[ 1.264009] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.264024] ACPI: Thermal Zone [THM0] (50 C)
[ 1.265266] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.265272] ACPI: Thermal Zone [THM1] (27 C)
[ 1.265430] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.266229] Linux agpgart interface v0.103
[ 1.266269] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[ 1.266807] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.268290] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.268297] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.268453] mousedev: PS/2 mouse device common for all mice
[ 1.268497] rtc_cmos 00:03: RTC can wake from S4
[ 1.268743] rtc_cmos 00:03: registered as rtc0
[ 1.268814] rtc_cmos 00:03: setting system clock to 2022-12-14T09:52:33 UTC (1671011553)
[ 1.268844] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.268857] intel_pstate: Intel P-state driver initializing
[ 1.269587] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.269793] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.269952] NET: Registered protocol family 10
[ 1.277451] Segment Routing with IPv6
[ 1.277506] mip6: Mobile IPv6
[ 1.277513] NET: Registered protocol family 17
[ 1.277595] mpls_gso: MPLS GSO support
[ 1.278485] microcode: sig=0x306a9, pf=0x10, revision=0x21
[ 1.278586] microcode: Microcode Update Driver: v2.2.
[ 1.278590] IPI shorthand broadcast: enabled
[ 1.278611] sched_clock: Marking stable (1277690411, 691874)->(1289432758, -11050473)
[ 1.278753] registered taskstats version 1
[ 1.278757] Loading compiled-in X.509 certificates
[ 1.310624] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.310657] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f'
[ 1.310705] zswap: loaded using pool lzo/zbud
[ 1.311091] Key type ._fscrypt registered
[ 1.311095] Key type .fscrypt registered
[ 1.311097] Key type fscrypt-provisioning registered
[ 1.311143] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.312400] Freeing unused kernel image (initmem) memory: 2648K
[ 1.344051] Write protecting the kernel read-only data: 22528k
[ 1.344606] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 1.344772] Freeing unused kernel image (rodata/data gap) memory: 608K
[ 1.393638] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.393642] x86/mm: Checking user space page tables
[ 1.437087] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.437093] Run /init as init process
[ 1.437095] with arguments:
[ 1.437096] /init
[ 1.437096] with environment:
[ 1.437097] HOME=/
[ 1.437097] TERM=linux
[ 1.437098] BOOT_IMAGE=/vmlinuz-5.10.0-19-amd64
[ 1.551878] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0E:00/input/input2
[ 1.564067] ACPI: Sleep Button [SLPB]
[ 1.564153] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0D:00/input/input3
[ 1.564210] ACPI: Lid Switch [LID]
[ 1.564290] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.564344] ACPI: Power Button [PWRF]
[ 1.569043] pps_core: LinuxPPS API ver. 1 registered
[ 1.569051] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.574684] SCSI subsystem initialized
[ 1.575237] cryptd: max_cpu_qlen set to 1000
[ 1.575506] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20200925/utaddress-204)
[ 1.575517] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.575523] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20200925/utaddress-204)
[ 1.575531] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.575534] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20200925/utaddress-204)
[ 1.575541] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.575545] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20200925/utaddress-204)
[ 1.575553] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.575557] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.580156] ACPI: bus type USB registered
[ 1.580190] usbcore: registered new interface driver usbfs
[ 1.580202] usbcore: registered new interface driver hub
[ 1.580218] usbcore: registered new device driver usb
[ 1.582127] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 1.582289] battery: ACPI: Battery Slot [BAT1] (battery absent)
[ 1.586495] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.586719] i2c i2c-0: 2/2 memory slots populated (from DMI)
[ 1.587017] sdhci: Secure Digital Host Controller Interface driver
[ 1.587022] sdhci: Copyright(c) Pierre Ossman
[ 1.587626] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.588366] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 1.589144] ehci-pci: EHCI PCI platform driver
[ 1.589329] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.589340] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.589358] ehci-pci 0000:00:1a.0: debug port 2
[ 1.593265] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.593385] i2c i2c-0: Successfully instantiated SPD at 0x51
[ 1.594242] PTP clock support registered
[ 1.594361] ehci-pci 0000:00:1a.0: irq 19, io mem 0x83836000
[ 1.598049] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 1.598290] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 1.598471] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[ 1.599206] AVX version of gcm_enc/dec engaged.
[ 1.599211] AES CTR mode by8 optimization enabled
[ 1.608837] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.608918] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.608924] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.608928] usb usb1: Product: EHCI Host Controller
[ 1.608932] usb usb1: Manufacturer: Linux 5.10.0-19-amd64 ehci_hcd
[ 1.608937] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.608944] libata version 3.00 loaded.
[ 1.610150] hub 1-0:1.0: USB hub found
[ 1.610166] hub 1-0:1.0: 3 ports detected
[ 1.610515] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.610527] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.610543] ehci-pci 0000:00:1d.0: debug port 2
[ 1.612932] e1000e: Intel(R) PRO/1000 Network Driver
[ 1.612937] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.613104] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.614471] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.614494] ehci-pci 0000:00:1d.0: irq 18, io mem 0x83837000
[ 1.617598] ahci 0000:00:1f.2: version 3.0
[ 1.617796] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.627900] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
[ 1.627911] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.628831] scsi host0: ahci
[ 1.629027] scsi host1: ahci
[ 1.629162] scsi host2: ahci
[ 1.629291] scsi host3: ahci
[ 1.629426] scsi host4: ahci
[ 1.629545] scsi host5: ahci
[ 1.629609] ata1: SATA max UDMA/133 abar m2048@0x83835000 port 0x83835100 irq 28
[ 1.629615] ata2: SATA max UDMA/133 abar m2048@0x83835000 port 0x83835180 irq 28
[ 1.629621] ata3: SATA max UDMA/133 abar m2048@0x83835000 port 0x83835200 irq 28
[ 1.629625] ata4: DUMMY
[ 1.629629] ata5: SATA max UDMA/133 abar m2048@0x83835000 port 0x83835300 irq 28
[ 1.629633] ata6: DUMMY
[ 1.632029] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.632169] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.632174] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.632177] usb usb2: Product: EHCI Host Controller
[ 1.632179] usb usb2: Manufacturer: Linux 5.10.0-19-amd64 ehci_hcd
[ 1.632181] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.632337] hub 2-0:1.0: USB hub found
[ 1.632349] hub 2-0:1.0: 3 ports detected
[ 1.632480] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.632493] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.633559] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930
[ 1.633567] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.633734] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.633738] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.633741] usb usb3: Product: xHCI Host Controller
[ 1.633743] usb usb3: Manufacturer: Linux 5.10.0-19-amd64 xhci-hcd
[ 1.633745] usb usb3: SerialNumber: 0000:00:14.0
[ 1.633886] hub 3-0:1.0: USB hub found
[ 1.633906] hub 3-0:1.0: 4 ports detected
[ 1.634066] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.634070] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.634075] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.634140] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 1.634144] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.634146] usb usb4: Product: xHCI Host Controller
[ 1.634148] usb usb4: Manufacturer: Linux 5.10.0-19-amd64 xhci-hcd
[ 1.634150] usb usb4: SerialNumber: 0000:00:14.0
[ 1.634240] hub 4-0:1.0: USB hub found
[ 1.634256] hub 4-0:1.0: 4 ports detected
[ 1.718563] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.731990] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 1.783467] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.816658] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:21:cc:db:db:61
[ 1.816666] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.816728] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 1.851310] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0
[ 1.851481] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.872082] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.881090] acpi device:0d: registered as cooling_device9
[ 1.881183] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 1.892054] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.892059] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[ 1.943112] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.032598] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 2.032606] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.032895] hub 1-1:1.0: USB hub found
[ 2.033107] hub 1-1:1.0: 6 ports detected
[ 2.043655] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.26
[ 2.043671] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.043677] usb 3-3: Product: USB2.0 Hub
[ 2.043681] usb 3-3: Manufacturer: GenesysLogic
[ 2.045037] hub 3-3:1.0: USB hub found
[ 2.045593] hub 3-3:1.0: 4 ports detected
[ 2.049162] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 2.049178] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.049922] hub 2-1:1.0: USB hub found
[ 2.050393] hub 2-1:1.0: 8 ports detected
[ 2.172125] usb 4-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 2.198619] usb 4-3: New USB device found, idVendor=05e3, idProduct=0620, bcdDevice=92.26
[ 2.198624] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.198628] usb 4-3: Product: USB3.1 Hub
[ 2.198631] usb 4-3: Manufacturer: GenesysLogic
[ 2.200431] hub 4-3:1.0: USB hub found
[ 2.200705] hub 4-3:1.0: 4 ports detected
[ 2.258135] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.292020] tsc: Refined TSC clocksource calibration: 2195.017 MHz
[ 2.292030] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa3cf9c5dc, max_idle_ns: 440795212634 ns
[ 2.292049] clocksource: Switched to clocksource tsc
[ 2.303621] fbcon: i915drmfb (fb0) is primary device
[ 2.307876] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
[ 2.324066] usb 1-1.6: new high-speed USB device number 3 using ehci-pci
[ 2.336072] usb 3-3.1: new high-speed USB device number 3 using xhci_hcd
[ 2.352064] usb 2-1.8: new high-speed USB device number 3 using ehci-pci
[ 2.369109] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262
[ 2.369118] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 2.407595] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 2.445189] usb 3-3.1: New USB device found, idVendor=152d, idProduct=2338, bcdDevice= 1.00
[ 2.445206] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 2.445208] usb 3-3.1: Product: USB to ATA/ATAPI bridge
[ 2.445210] usb 3-3.1: Manufacturer: JMicron
[ 2.445212] usb 3-3.1: SerialNumber: 000000000000
[ 2.451602] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2db, bcdDevice= 5.64
[ 2.451605] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.451607] usb 1-1.6: Product: Integrated Camera
[ 2.451609] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.460731] usb 2-1.8: New USB device found, idVendor=17ef, idProduct=100a, bcdDevice= 0.00
[ 2.460735] usb 2-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.461328] hub 2-1.8:1.0: USB hub found
[ 2.461465] hub 2-1.8:1.0: 7 ports detected
[ 2.524069] usb 3-3.4: new full-speed USB device number 4 using xhci_hcd
[ 2.574935] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.581196] ata3.00: ATA-10: Dogfish SSD 1TB, T0519A0, max UDMA/133
[ 2.581200] ata3.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 2.590820] ata3.00: configured for UDMA/133
[ 2.601294] scsi 2:0:0:0: Direct-Access ATA Dogfish SSD 1TB 9A0 PQ: 0 ANSI: 5
[ 2.630598] usb 3-3.4: New USB device found, idVendor=046d, idProduct=0a49, bcdDevice= 0.30
[ 2.630601] usb 3-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.630603] usb 3-3.4: Product: Logitech H820e
[ 2.630605] usb 3-3.4: Manufacturer: Logitech Inc
[ 2.630607] usb 3-3.4: SerialNumber: 0000000000
[ 2.748077] usb 2-1.8.2: new full-speed USB device number 4 using ehci-pci
[ 2.866597] usb 2-1.8.2: New USB device found, idVendor=17ef, idProduct=6047, bcdDevice= 3.30
[ 2.866601] usb 2-1.8.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.866603] usb 2-1.8.2: Product: ThinkPad Compact USB Keyboard with TrackPoint
[ 2.866605] usb 2-1.8.2: Manufacturer: Lenovo
[ 2.915051] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.050318] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 3.250062] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
[ 3.310594] Console: switching to colour frame buffer device 200x56
[ 3.357702] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 3.376977] e1000e 0000:00:19.0 eno0: renamed from eth0
[ 3.386585] usb-storage 3-3.1:1.0: USB Mass Storage device detected
[ 3.387695] scsi host6: usb-storage 3-3.1:1.0
[ 3.388918] usbcore: registered new interface driver usb-storage
[ 3.389096] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 3.391406] sd 2:0:0:0: [sda] Write Protect is off
[ 3.391458] hid: raw HID events driver (C) Jiri Kosina
[ 3.392471] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.393491] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.407673] usbcore: registered new interface driver usbhid
[ 3.408732] usbhid: USB HID core driver
[ 3.437829] sda: sda1 sda2 < sda5 >
[ 3.488860] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.492064] input: Logitech Inc Logitech H820e Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4:1.3/0003:046D:0A49.0001/input/input8
[ 3.492067] usbcore: registered new interface driver uas
[ 3.552103] input: Logitech Inc Logitech H820e as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4:1.3/0003:046D:0A49.0001/input/input9
[ 3.553610] hid-generic 0003:046D:0A49.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Logitech Inc Logitech H820e] on usb-0000:00:14.0-3.4/input3
[ 3.556434] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.0/0003:17EF:6047.0002/input/input10
[ 3.616279] lenovo 0003:17EF:6047.0002: input,hidraw1: USB HID v1.00 Keyboard [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-0000:00:1d.0-1.8.2/input0
[ 3.619568] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.1/0003:17EF:6047.0003/input/input11
[ 3.680147] lenovo 0003:17EF:6047.0003: input,hiddev1,hidraw2: USB HID v1.00 Mouse [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-0000:00:1d.0-1.8.2/input1
[ 3.887362] device-mapper: uevent: version 1.0.3
[ 3.888851] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[ 4.400908] scsi 6:0:0:0: Direct-Access ST1000LM 035-1RK172 PQ: 0 ANSI: 2 CCS
[ 4.404876] sd 6:0:0:0: [sdb] 244190646 4096-byte logical blocks: (1.00 TB/932 GiB)
[ 4.408368] sd 6:0:0:0: [sdb] Write Protect is off
[ 4.411251] sd 6:0:0:0: [sdb] Mode Sense: 28 00 00 00
[ 4.411611] sd 6:0:0:0: [sdb] No Caching mode page found
[ 4.414483] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 4.466167] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 14.284912] usb 3-3.1: USB disconnect, device number 3
[ 20.545476] PM: Image not found (code -22)
[ 20.720348] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 20.794029] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 21.017799] systemd[1]: Inserted module 'autofs4'
[ 21.041848] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 21.060350] systemd[1]: Detected architecture x86-64.
[ 21.066995] systemd[1]: Set hostname to <red>.
[ 21.334024] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 21.370741] systemd[1]: Queued start job for default target Graphical Interface.
[ 21.389518] systemd[1]: Created slice system-getty.slice.
[ 21.389941] systemd[1]: Created slice system-modprobe.slice.
[ 21.390303] systemd[1]: Created slice Cryptsetup Units Slice.
[ 21.390610] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 21.390916] systemd[1]: Created slice system-tor.slice.
[ 21.391195] systemd[1]: Created slice User and Session Slice.
[ 21.391285] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 21.391480] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 21.391568] systemd[1]: Reached target User and Group Name Lookups.
[ 21.391600] systemd[1]: Reached target Remote File Systems.
[ 21.391626] systemd[1]: Reached target Slices.
[ 21.391730] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 21.391865] systemd[1]: Listening on LVM2 poll daemon socket.
[ 21.391970] systemd[1]: Listening on Syslog Socket.
[ 21.392100] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 21.392174] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 21.392364] systemd[1]: Listening on Journal Audit Socket.
[ 21.392477] systemd[1]: Listening on Journal Socket (/dev/log).
[ 21.392599] systemd[1]: Listening on Journal Socket.
[ 21.392743] systemd[1]: Listening on udev Control Socket.
[ 21.392870] systemd[1]: Listening on udev Kernel Socket.
[ 21.393651] systemd[1]: Mounting Huge Pages File System...
[ 21.394467] systemd[1]: Mounting POSIX Message Queue File System...
[ 21.395356] systemd[1]: Mounting Kernel Debug File System...
[ 21.396190] systemd[1]: Mounting Kernel Trace File System...
[ 21.396391] systemd[1]: Finished Availability of block devices.
[ 21.397300] systemd[1]: Starting Set the console keyboard layout...
[ 21.398123] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 21.398905] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 21.399674] systemd[1]: Starting Load Kernel Module configfs...
[ 21.400488] systemd[1]: Starting Load Kernel Module drm...
[ 21.401312] systemd[1]: Starting Load Kernel Module fuse...
[ 21.405442] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 21.405536] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 21.407403] systemd[1]: Starting Journal Service...
[ 21.410112] systemd[1]: Starting Load Kernel Modules...
[ 21.410937] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 21.411909] systemd[1]: Starting Coldplug All udev Devices...
[ 21.414460] systemd[1]: Mounted Huge Pages File System.
[ 21.414666] systemd[1]: Mounted POSIX Message Queue File System.
[ 21.414827] systemd[1]: Mounted Kernel Debug File System.
[ 21.414984] systemd[1]: Mounted Kernel Trace File System.
[ 21.415489] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 21.415946] systemd[1]: Finished Set the console keyboard layout.
[ 21.416267] systemd[1]: modprobe@configfs.service: Succeeded.
[ 21.416443] systemd[1]: Finished Load Kernel Module configfs.
[ 21.416704] systemd[1]: modprobe@drm.service: Succeeded.
[ 21.416880] systemd[1]: Finished Load Kernel Module drm.
[ 21.418286] systemd[1]: Mounting Kernel Configuration File System...
[ 21.420287] systemd[1]: Mounted Kernel Configuration File System.
[ 21.429334] fuse: init (API version 7.32)
[ 21.430061] systemd[1]: modprobe@fuse.service: Succeeded.
[ 21.430276] systemd[1]: Finished Load Kernel Module fuse.
[ 21.431300] systemd[1]: Mounting FUSE Control File System...
[ 21.433716] systemd[1]: Mounted FUSE Control File System.
[ 21.448881] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 21.450198] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 21.451882] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 21.451923] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 21.452785] systemd[1]: Starting Load/Save Random Seed...
[ 21.453608] systemd[1]: Starting Create System Users...
[ 21.461899] lp: driver loaded but no devices found
[ 21.493314] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 21.513712] systemd[1]: Started Journal Service.
[ 21.514256] ppdev: user-space parallel port driver
[ 21.522551] systemd-journald[468]: Received client request to flush runtime journal.
[ 21.794305] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 21.794540] ACPI: AC Adapter [AC] (on-line)
[ 21.836805] iTCO_vendor_support: vendor-support=0
[ 21.847413] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 21.847809] input: PC Speaker as /devices/platform/pcspkr/input/input12
[ 21.850977] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 21.851024] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 21.851142] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 21.854694] at24 0-0050: supply vcc not found, using dummy regulator
[ 21.857055] at24 0-0050: 256 byte spd EEPROM, read-only
[ 21.857095] at24 0-0051: supply vcc not found, using dummy regulator
[ 21.857708] at24 0-0051: 256 byte spd EEPROM, read-only
[ 21.946419] mc: Linux media interface: v0.10
[ 22.001538] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 22.003543] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 22.003550] ext2 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[ 22.136123] Adding 999420k swap on /dev/mapper/red--vg-swap_1. Priority:-2 extents:1 across:999420k SSFS
[ 22.144566] audit: type=1400 audit(1671011574.371:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=605 comm="apparmor_parser"
[ 22.145466] audit: type=1400 audit(1671011574.371:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=602 comm="apparmor_parser"
[ 22.145472] audit: type=1400 audit(1671011574.371:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=602 comm="apparmor_parser"
[ 22.145821] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 22.145824] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 22.145825] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 22.145826] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 22.148512] audit: type=1400 audit(1671011574.375:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=604 comm="apparmor_parser"
[ 22.148962] audit: type=1400 audit(1671011574.375:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=607 comm="apparmor_parser"
[ 22.148967] audit: type=1400 audit(1671011574.375:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=607 comm="apparmor_parser"
[ 22.148970] audit: type=1400 audit(1671011574.375:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=607 comm="apparmor_parser"
[ 22.153660] audit: type=1400 audit(1671011574.379:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=606 comm="apparmor_parser"
[ 22.153694] audit: type=1400 audit(1671011574.379:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=616 comm="apparmor_parser"
[ 22.154070] audit: type=1400 audit(1671011574.379:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=609 comm="apparmor_parser"
[ 23.856091] mei_me 0000:00:16.0: wait hw ready failed
[ 23.856099] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 23.856116] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 25.872058] mei_me 0000:00:16.0: wait hw ready failed
[ 25.872066] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 25.872085] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 26.479852] rfkill: input handler disabled
[ 27.888029] mei_me 0000:00:16.0: wait hw ready failed
[ 27.888035] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 27.888045] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
[ 27.888047] mei_me 0000:00:16.0: reset failed ret = -19
[ 27.888049] mei_me 0000:00:16.0: link layer initialization failed.
[ 27.888052] mei_me 0000:00:16.0: init hw failure.
[ 27.888121] mei_me 0000:00:16.0: initialization failed.
[ 27.892658] Non-volatile memory driver v1.3
[ 27.913993] videodev: Linux video capture interface: v2.00
[ 27.914878] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 27.914882] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 27.914885] thinkpad_acpi: ThinkPad BIOS CBET4000 4.16-1239-gd5c31acee4, EC G1HT36WW-3.22
[ 27.914886] thinkpad_acpi: Lenovo ThinkPad T430, model 2349NY1
[ 27.915364] thinkpad_acpi: radio switch found; radios are enabled
[ 27.915483] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 27.915495] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 27.915496] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 27.919585] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 27.919707] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 27.921749] thinkpad_acpi: battery 1 registered (start 0, stop 100)
[ 27.921757] battery: new extension: ThinkPad Battery Extension
[ 27.921823] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input13
[ 27.965739] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 27.966076] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 27.966146] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2db)
[ 27.966383] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 27.966689] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 27.972257] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input14
[ 27.972373] usbcore: registered new interface driver uvcvideo
[ 27.972374] USB Video Class driver (1.1.1)
[ 27.973669] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[ 27.982133] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[ 28.020056] intel_rapl_common: Found RAPL domain package
[ 28.020061] intel_rapl_common: Found RAPL domain core
[ 28.020063] intel_rapl_common: Found RAPL domain uncore
[ 28.030427] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 28.033559] usbcore: registered new interface driver snd-usb-audio
[ 28.081566] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3202: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 28.081572] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 28.081575] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 28.081578] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 28.081580] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 28.081582] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 28.081584] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 28.081586] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 28.133799] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 28.133856] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 28.133906] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 28.133952] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 28.134020] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 28.134085] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ 28.134148] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[ 28.134200] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[ 28.152649] ath: phy0: Enable WAR for ASPM D3/L1
[ 28.587222] ath: EEPROM regdomain: 0x6b
[ 28.587225] ath: EEPROM indicates we should expect a direct regpair map
[ 28.587227] ath: Country alpha2 being used: 00
[ 28.587227] ath: Regpair used: 0x6b
[ 28.587240] ------------[ cut here ]------------
[ 28.587250] WARNING: CPU: 0 PID: 522 at drivers/net/wireless/ath/regd.c:244 ath_regd_init.cold+0xda/0x13c [ath]
[ 28.587251] Modules linked in: ath9k(+) ath9k_common ath9k_hw snd_hda_codec_hdmi snd_hda_codec_realtek ath snd_hda_codec_generic snd_hda_intel snd_intel_dspcfg intel_rapl_msr mac80211 soundwire_intel intel_rapl_common soundwire_generic_allocation snd_soc_core snd_compress uvcvideo soundwire_cadence cfg80211 snd_hda_codec videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 snd_usb_audio videobuf2_common snd_hda_core thinkpad_acpi snd_usbmidi_lib videodev snd_hwdep snd_rawmidi x86_pkg_temp_thermal soundwire_bus intel_powerclamp snd_seq_device nvram coretemp overlay kvm_intel kvm irqbypass rapl snd_pcm intel_cstate joydev ledtrig_audio mc snd_timer intel_uncore libarc4 serio_raw at24 snd iTCO_wdt mei_me pcspkr sg intel_pmc_bxt soundcore mei iTCO_vendor_support watchdog rfkill ac tpm_tis tpm_tis_core tpm evdev rng_core cuse msr parport_pc ppdev lp parport fuse configfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic dm_crypt dm_mod hid_lenovo hid_generic uas usbhid hid sd_mod
[ 28.587303] usb_storage crc32_pclmul t10_pi crc32c_intel crc_t10dif crct10dif_generic crct10dif_pclmul crct10dif_common ghash_clmulni_intel i915 i2c_algo_bit xhci_pci drm_kms_helper ahci xhci_hcd libahci e1000e cec libata aesni_intel sdhci_pci ptp ehci_pci cqhci ehci_hcd sdhci i2c_i801 libaes drm crypto_simd usbcore lpc_ich scsi_mod psmouse pps_core mmc_core cryptd glue_helper i2c_smbus usb_common fan battery video button
[ 28.587331] CPU: 0 PID: 522 Comm: systemd-udevd Not tainted 5.10.0-19-amd64 #1 Debian 5.10.149-2
[ 28.587332] Hardware name: LENOVO 2349NY1/2349NY1, BIOS CBET4000 4.16-1239-gd5c31acee4 05/30/2022
[ 28.587335] RIP: 0010:ath_regd_init.cold+0xda/0x13c [ath]
[ 28.587338] Code: e6 4c 89 c7 f3 a5 eb 84 49 8b 54 24 10 0f b7 12 66 83 fa 6c 77 14 66 83 fa 64 77 1f 74 53 66 83 fa 63 74 56 66 83 fa 5f 77 59 <0f> 0b 48 c7 c6 80 84 22 c1 83 cf 0b 89 7d 38 eb 8b 83 ea 65 be 01
[ 28.587340] RSP: 0018:ffffad0940523b18 EFLAGS: 00010246
[ 28.587341] RAX: 0000000000000000 RBX: ffff9a69c932c018 RCX: 0000000000000006
[ 28.587343] RDX: 0000000000000000 RSI: ffffffffc12285c0 RDI: 0000000000000000
[ 28.587344] RBP: ffff9a69c61d0300 R08: ffff9a69c932c168 R09: ffffad0940523920
[ 28.587345] R10: ffffad0940523918 R11: ffffffffb42cb448 R12: ffff9a69c932c150
[ 28.587346] R13: ffff9a69c61d0800 R14: ffff9a69c932c018 R15: 0000000000000000
[ 28.587348] FS: 00007fef649698c0(0000) GS:ffff9a6d2d200000(0000) knlGS:0000000000000000
[ 28.587349] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 28.587350] CR2: 000056051fb40018 CR3: 0000000150014006 CR4: 00000000001706f0
[ 28.587351] Call Trace:
[ 28.587361] ? ath9k_op_ps_wakeup+0x10/0x10 [ath9k]
[ 28.587368] ath9k_init_device+0xcbf/0xe10 [ath9k]
[ 28.587372] ? request_threaded_irq+0xf8/0x160
[ 28.587378] ath_pci_probe+0x1df/0x290 [ath9k]
[ 28.587382] ? pinctrl_put+0x40/0x40
[ 28.587386] local_pci_probe+0x42/0x80
[ 28.587389] ? _cond_resched+0x16/0x50
[ 28.587391] pci_device_probe+0x101/0x1b0
[ 28.587395] really_probe+0x222/0x480
[ 28.587397] driver_probe_device+0xe5/0x150
[ 28.587400] device_driver_attach+0xa9/0xb0
[ 28.587403] __driver_attach+0xb5/0x170
[ 28.587404] ? device_driver_attach+0xb0/0xb0
[ 28.587406] ? device_driver_attach+0xb0/0xb0
[ 28.587408] bus_for_each_dev+0x78/0xc0
[ 28.587410] bus_add_driver+0x13a/0x200
[ 28.587413] driver_register+0x8b/0xe0
[ 28.587418] ? set_use_msi+0x19/0x19 [ath9k]
[ 28.587423] ath9k_init+0xa/0xfe7 [ath9k]
[ 28.587427] do_one_initcall+0x44/0x1d0
[ 28.587430] ? do_init_module+0x23/0x250
[ 28.587433] ? kmem_cache_alloc_trace+0xf5/0x200
[ 28.587436] do_init_module+0x4c/0x250
[ 28.587438] __do_sys_finit_module+0xb1/0x120
[ 28.587442] do_syscall_64+0x33/0x80
[ 28.587444] entry_SYSCALL_64_after_hwframe+0x61/0xc6
[ 28.587446] RIP: 0033:0x7fef64e203a9
[ 28.587448] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b7 8a 0d 00 f7 d8 64 89 01 48
[ 28.587450] RSP: 002b:00007fffb6a0aed8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 28.587451] RAX: ffffffffffffffda RBX: 0000560afea0bce0 RCX: 00007fef64e203a9
[ 28.587452] RDX: 0000000000000000 RSI: 00007fef64fbde2d RDI: 0000000000000014
[ 28.587453] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000560afea11cd0
[ 28.587455] R10: 0000000000000014 R11: 0000000000000246 R12: 00007fef64fbde2d
[ 28.587456] R13: 0000000000000000 R14: 0000560afea203f0 R15: 0000560afea0bce0
[ 28.587458] ---[ end trace b1523565e1314a2c ]---
[ 28.593766] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 28.594252] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffad09414b0000, irq=17
[ 28.616145] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[ 31.645713] rfkill: input handler enabled
[ 33.461583] wlp2s0: authenticate with 78:d2:94:52:25:d0
[ 33.481790] wlp2s0: send auth to 78:d2:94:52:25:d0 (try 1/3)
[ 33.497129] wlp2s0: authenticated
[ 33.500037] wlp2s0: associate with 78:d2:94:52:25:d0 (try 1/3)
[ 33.501876] wlp2s0: RX AssocResp from 78:d2:94:52:25:d0 (capab=0x431 status=0 aid=2)
[ 33.502032] wlp2s0: associated
[ 33.532808] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 34.516109] rfkill: input handler disabled
[ 36.243370] kauditd_printk_skb: 13 callbacks suppressed
[ 36.243371] audit: type=1400 audit(1671011588.467:25): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=2022 comm="apparmor_parser"
[ 36.584561] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 36.586742] Bridge firewalling registered
[ 36.661893] Initializing XFRM netlink socket
[ 49.196836] traps: pool-tracker-st[1392] trap int3 ip:7fdca2baaca7 sp:7fdc9dd2d9a0 error:0 in libglib-2.0.so.0.6600.8[7fdca2b6e000+88000]