[    0.000000] Linux version 4.16.13-gentoo (root@localhost) (gcc version 6.3.0 (Gentoo 6.3.0 p1.0)) #3 SMP Sun Jun 3 23:43:51 MSK 2018
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.16.13-gentoo root=/dev/mapper/vg-root ro root=/dev/ram0 real_root=/dev/mapper/vg-root crypt_root=/dev/sdc3 dolvm thinkpad_acpi.fan_control=1 "acpi_osi=!Windows 2012" root_trim=yes
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff3ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ff40000-0x000000007fffffff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000080000000-0x00000000829fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047b5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 4236W9B/4236W9B, BIOS CBET4000 4.8-361-gc07f8fbe6f 06/04/2018
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x47b600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 080000000 mask FC0000000 uncachable
[    0.000000]   1 base 0C0000000 mask FF0000000 uncachable
[    0.000000]   2 base 0D0000000 mask FF0000000 write-combining
[    0.000000]   3 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0x7ff40 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 99000 size 24576
[    0.000000] BRK [0x02bff000, 0x02bfffff] PGTABLE
[    0.000000] BRK [0x02c00000, 0x02c00fff] PGTABLE
[    0.000000] BRK [0x02c01000, 0x02c01fff] PGTABLE
[    0.000000] BRK [0x02c02000, 0x02c02fff] PGTABLE
[    0.000000] BRK [0x02c03000, 0x02c03fff] PGTABLE
[    0.000000] BRK [0x02c04000, 0x02c04fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x37ad3000-0x37d60fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x000000007FF520E0 000054 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x000000007FF557C0 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x000000007FF52280 003534 (v02 COREv4 COREBOOT 20110725 INTL 20161222)
[    0.000000] ACPI: FACS 0x000000007FF52240 000040
[    0.000000] ACPI: FACS 0x000000007FF52240 000040
[    0.000000] ACPI: SSDT 0x000000007FF558C0 002D15 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: MCFG 0x000000007FF585E0 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: TCPA 0x000000007FF58620 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x000000007FF58660 00008C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x000000007FF5A6F0 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000047b5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x47b5ef000-0x47b5f2fff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000047b5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007ff3ffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000047b5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000047b5fffff]
[    0.000000] On node 0 totalpages: 4175071
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8125 pages used for memmap
[    0.000000]   DMA32 zone: 520000 pages, LIFO batch:31
[    0.000000]   Normal zone: 57048 pages used for memmap
[    0.000000]   Normal zone: 3651072 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 97 pages
[    0.000000] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ff40000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0x829fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xffffffff]
[    0.000000] e820: [mem 0x82a00000-0xefffffff] available for PCI devices
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x8b/0x43a with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 43 pages/cpu @        (ptrval) s138072 r8192 d29864 u262144
[    0.000000] pcpu-alloc: s138072 r8192 d29864 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4109812
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.16.13-gentoo root=/dev/mapper/vg-root ro root=/dev/ram0 real_root=/dev/mapper/vg-root crypt_root=/dev/sdc3 dolvm thinkpad_acpi.fan_control=1 "acpi_osi=!Windows 2012" root_trim=yes
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16339292K/16700284K available (14364K kernel code, 1518K rwdata, 3648K rodata, 1280K init, 692K bss, 360992K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180105
[    0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.005000] tsc: Fast TSC calibration using PIT
[    0.006000] tsc: Detected 2194.936 MHz processor
[    0.006000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa3831d69f, max_idle_ns: 440795214968 ns
[    0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.87 BogoMIPS (lpj=2194936)
[    0.006000] pid_max: default: 32768 minimum: 301
[    0.006000] Security Framework initialized
[    0.006000] SELinux:  Initializing.
[    0.006000] SELinux:  Starting in permissive mode
[    0.009027] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.010362] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.010509] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.010624] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.010898] CPU: Physical Processor ID: 0
[    0.010971] CPU: Processor Core ID: 0
[    0.011010] mce: CPU supports 9 MCE banks
[    0.011098] CPU0: Thermal monitoring enabled (TM1)
[    0.011181] process: using mwait in idle threads
[    0.011255] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.011330] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.011407] Spectre V2 : Vulnerable: Minimal generic ASM retpoline
[    0.011482] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.011584] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.011661] Speculative Store Bypass: Vulnerable
[    0.011859] Freeing SMP alternatives memory: 44K
[    0.012162] TSC deadline timer enabled
[    0.012165] smpboot: CPU0: Intel(R) Core(TM) i7-3632QM CPU @ 2.20GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.012357] mce: [Hardware Error]: Machine check events logged
[    0.012456] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 7: ee2000000003110a
[    0.012602] mce: [Hardware Error]: TSC 0 ADDR feffff40 MISC 1040000086 
[    0.012704] mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1528321207 SOCKET 0 APIC 0 microcode 1f
[    0.012853] mce: [Hardware Error]: Machine check events logged
[    0.012951] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 8: ee2000000003110a
[    0.013000] mce: [Hardware Error]: TSC 0 ADDR feffff00 MISC 1040000086 
[    0.013003] mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1528321207 SOCKET 0 APIC 0 microcode 1f
[    0.013186] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.013360] ... version:                3
[    0.013455] ... bit width:              48
[    0.013549] ... generic registers:      4
[    0.013645] ... value mask:             0000ffffffffffff
[    0.013742] ... max period:             00007fffffffffff
[    0.013839] ... fixed-purpose events:   3
[    0.013934] ... event mask:             000000070000000f
[    0.014035] Hierarchical SRCU implementation.
[    0.014252] smp: Bringing up secondary CPUs ...
[    0.014408] x86: Booting SMP configuration:
[    0.014504] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.022022] smp: Brought up 1 node, 8 CPUs
[    0.022200] smpboot: Max logical packages: 1
[    0.022296] smpboot: Total of 8 processors activated (35118.97 BogoMIPS)
[    0.023392] devtmpfs: initialized
[    0.023392] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.023392] kworker/u16:0 (51) used greatest stack depth: 14232 bytes left
[    0.024014] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.024281] RTC time: 21:40:07, date: 06/06/18
[    0.024453] NET: Registered protocol family 16
[    0.024710] audit: initializing netlink subsys (disabled)
[    0.024812] audit: type=2000 audit(1528321207.024:1): state=initialized audit_enabled=0 res=1
[    0.024812] cpuidle: using governor ladder
[    0.025010] cpuidle: using governor menu
[    0.025221] ACPI: bus type PCI registered
[    0.025379] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.025531] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.025638] PCI: Using configuration type 1 for base access
[    0.025849] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.030407] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.030408] cryptd: max_cpu_qlen set to 1000
[    0.030408] ACPI: Added _OSI(Module Device)
[    0.030408] ACPI: Added _OSI(Processor Device)
[    0.030408] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.030408] ACPI: Added _OSI(Processor Aggregator Device)
[    0.030454] ACPI: Deleted _OSI(Windows 2012)
[    0.031087] ACPI: Executed 1 blocks of module-level executable AML code
[    0.033734] ACPI: EC: EC started
[    0.033829] ACPI: EC: interrupt blocked
[    0.033975] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.034003] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.034150] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.034297] ACPI: Interpreter enabled
[    0.034409] ACPI: (supports S0 S3 S4 S5)
[    0.034503] ACPI: Using IOAPIC for interrupt routing
[    0.034621] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.034886] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.040013] ACPI: Power Resource [FPWR] (off)
[    0.040215] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.040318] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.040508] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.040664] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.040887] PCI host bridge to bus 0000:00
[    0.040986] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.041003] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.041103] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.041250] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.041398] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.041545] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.041693] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.041840] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.041987] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.042002] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.042148] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.042295] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.042442] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.042588] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.042736] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.042883] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.043002] pci_bus 0000:00: root bus resource [mem 0x82a00001-0xefffffff window]
[    0.043148] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.043296] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.043402] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.043493] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.043505] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit]
[    0.043512] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.043516] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.044008] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[    0.044008] pci 0000:00:04.0: reg 0x10: [mem 0xe1620000-0xe1627fff 64bit]
[    0.044015] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.044015] pci 0000:00:19.0: reg 0x10: [mem 0xe1600000-0xe161ffff]
[    0.044015] pci 0000:00:19.0: reg 0x14: [mem 0xe162c000-0xe162cfff]
[    0.044015] pci 0000:00:19.0: reg 0x18: [io  0x3040-0x305f]
[    0.044015] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.044015] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.044015] pci 0000:00:1a.0: reg 0x10: [mem 0xe162f000-0xe162f3ff]
[    0.044015] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.044038] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.044061] pci 0000:00:1b.0: reg 0x10: [mem 0xe1628000-0xe162bfff 64bit]
[    0.044136] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.044207] pci 0000:00:1c.0: [8086:1c12] type 01 class 0x060400
[    0.044297] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.044367] pci 0000:00:1c.1: [8086:1c16] type 01 class 0x060400
[    0.044456] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.045008] pci 0000:00:1c.3: [8086:1c18] type 01 class 0x060400
[    0.045008] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.045011] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.045011] pci 0000:00:1d.0: reg 0x10: [mem 0xe1630000-0xe16303ff]
[    0.045011] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.045012] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[    0.045091] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.045112] pci 0000:00:1f.2: reg 0x10: [io  0x3080-0x3087]
[    0.045120] pci 0000:00:1f.2: reg 0x14: [io  0x3090-0x3093]
[    0.045128] pci 0000:00:1f.2: reg 0x18: [io  0x3088-0x308f]
[    0.045137] pci 0000:00:1f.2: reg 0x1c: [io  0x3094-0x3097]
[    0.045145] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.045153] pci 0000:00:1f.2: reg 0x24: [mem 0xe162e000-0xe162e7ff]
[    0.045198] pci 0000:00:1f.2: PME# supported from D3hot
[    0.045262] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.045282] pci 0000:00:1f.3: reg 0x10: [mem 0xe1631000-0xe16310ff 64bit]
[    0.045303] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.045382] pci 0000:00:1f.6: [8086:1c24] type 00 class 0x118000
[    0.045407] pci 0000:00:1f.6: reg 0x10: [mem 0xe162d000-0xe162dfff 64bit]
[    0.046011] pci 0000:01:00.0: [168c:0034] type 00 class 0x028000
[    0.046011] pci 0000:01:00.0: reg 0x10: [mem 0xe1400000-0xe147ffff 64bit]
[    0.046011] pci 0000:01:00.0: reg 0x30: [mem 0xe1480000-0xe148ffff pref]
[    0.046011] pci 0000:01:00.0: supports D1 D2
[    0.046011] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.049041] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.049160] pci 0000:00:1c.0:   bridge window [mem 0xe1400000-0xe14fffff]
[    0.049215] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.049314] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.049318] pci 0000:00:1c.1:   bridge window [mem 0xe0800000-0xe0ffffff]
[    0.049324] pci 0000:00:1c.1:   bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[    0.049416] pci 0000:03:00.0: [1180:e822] type 00 class 0x080501
[    0.049454] pci 0000:03:00.0: MMC controller base frequency changed to 50Mhz.
[    0.049606] pci 0000:03:00.0: reg 0x10: [mem 0xe1500000-0xe15000ff]
[    0.049919] pci 0000:03:00.0: supports D1 D2
[    0.049920] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.053042] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.053161] pci 0000:00:1c.3:   bridge window [mem 0xe1500000-0xe15fffff]
[    0.053329] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.053474] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.053617] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.053760] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.053901] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.054041] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.054182] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.054321] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.055190] ACPI: EC: interrupt unblocked
[    0.055292] ACPI: EC: event unblocked
[    0.055392] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.055537] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.056019] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.056106] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.056106] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.056106] vgaarb: loaded
[    0.057008] SCSI subsystem initialized
[    0.057031] libata version 3.00 loaded.
[    0.057047] ACPI: bus type USB registered
[    0.057160] usbcore: registered new interface driver usbfs
[    0.057264] usbcore: registered new interface driver hub
[    0.057385] usbcore: registered new device driver usb
[    0.057496] Linux video capture interface: v2.00
[    0.057599] pps_core: LinuxPPS API ver. 1 registered
[    0.057599] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.057599] PTP clock support registered
[    0.058020] EDAC MC: Ver: 3.0.0
[    0.058187] Advanced Linux Sound Architecture Driver Initialized.
[    0.058190] PCI: Using ACPI for IRQ routing
[    0.060153] PCI: pci_cache_line_size set to 64 bytes
[    0.060219] e820: reserve RAM buffer [mem 0x7ff40000-0x7fffffff]
[    0.060220] e820: reserve RAM buffer [mem 0x47b600000-0x47bffffff]
[    0.060317] Bluetooth: Core ver 2.22
[    0.060420] NET: Registered protocol family 31
[    0.060517] Bluetooth: HCI device and connection manager initialized
[    0.060616] Bluetooth: HCI socket layer initialized
[    0.060713] Bluetooth: L2CAP socket layer initialized
[    0.060814] Bluetooth: SCO socket layer initialized
[    0.060916] NetLabel: Initializing
[    0.061002] NetLabel:  domain hash size = 128
[    0.061097] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.061210] NetLabel:  unlabeled traffic allowed by default
[    0.061322] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.061322] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.064020] clocksource: Switched to clocksource tsc-early
[    0.073617] VFS: Disk quotas dquot_6.6.0
[    0.073731] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.075425] pnp: PnP ACPI init
[    0.075658] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.075759] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.075859] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.075959] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.076063] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.076163] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.076263] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.076362] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.076463] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[    0.076562] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[    0.076670] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.077185] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.077293] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.077337] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.077438] system 00:02: [io  0x0480-0x04bf] has been reserved
[    0.077541] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.077566] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.077602] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.077633] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.077664] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[    0.077689] pnp: PnP ACPI: found 7 devices
[    0.082341] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.082525] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.082628] pci 0000:00:1c.0:   bridge window [mem 0xe1400000-0xe14fffff]
[    0.082735] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.082833] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.082934] pci 0000:00:1c.1:   bridge window [mem 0xe0800000-0xe0ffffff]
[    0.083040] pci 0000:00:1c.1:   bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[    0.083191] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.083294] pci 0000:00:1c.3:   bridge window [mem 0xe1500000-0xe15fffff]
[    0.083404] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.083405] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.083407] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.083408] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.083409] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.083410] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.083412] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.083413] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.083414] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.083415] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.083416] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.083417] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.083418] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.083420] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.083421] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.083422] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.083423] pci_bus 0000:00: resource 20 [mem 0x82a00001-0xefffffff window]
[    0.083424] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[    0.083426] pci_bus 0000:01: resource 1 [mem 0xe1400000-0xe14fffff]
[    0.083427] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.083428] pci_bus 0000:02: resource 1 [mem 0xe0800000-0xe0ffffff]
[    0.083429] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe07fffff 64bit pref]
[    0.083430] pci_bus 0000:03: resource 1 [mem 0xe1500000-0xe15fffff]
[    0.083499] NET: Registered protocol family 2
[    0.083735] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[    0.083926] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.084292] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.084508] TCP: Hash tables configured (established 131072 bind 65536)
[    0.084644] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.084783] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.084953] NET: Registered protocol family 1
[    0.085139] RPC: Registered named UNIX socket transport module.
[    0.085237] RPC: Registered udp transport module.
[    0.085333] RPC: Registered tcp transport module.
[    0.085429] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.085621] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.086063] PCI: CLS 64 bytes, default 64
[    0.086100] Unpacking initramfs...
[    0.378258] Freeing initrd memory: 2616K
[    0.378359] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.378459] software IO TLB [mem 0x7bf40000-0x7ff40000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    0.378782] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    0.378930] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    0.379032] RAPL PMU: hw unit of domain package 2^-16 Joules
[    0.379131] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    0.380145] Scanning for low memory corruption every 60 seconds
[    0.381240] Initialise system trusted keyrings
[    0.381362] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    0.383218] NFS: Registering the id_resolver key type
[    0.383319] Key type id_resolver registered
[    0.383414] Key type id_legacy registered
[    0.383512] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.383614] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.383915] SELinux:  Registering netfilter hooks
[    0.384851] NET: Registered protocol family 38
[    0.384967] Key type asymmetric registered
[    0.385065] Asymmetric key parser 'x509' registered
[    0.385190] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.386672] io scheduler noop registered
[    0.386768] io scheduler deadline registered
[    0.386907] io scheduler cfq registered (default)
[    0.387008] io scheduler mq-deadline registered
[    0.387104] io scheduler kyber registered
[    0.387819] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
[    0.387940] pcieport 0000:00:1c.1: Signaling PME with IRQ 25
[    0.388071] pcieport 0000:00:1c.3: Signaling PME with IRQ 26
[    0.396625] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.397116] Non-volatile memory driver v1.3
[    0.397231] Linux agpgart interface v0.103
[    0.397619] ACPI: AC Adapter [AC] (on-line)
[    0.397769] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:27/PNP0C09:00/PNP0C0E:00/input/input0
[    0.397936] ACPI: Sleep Button [SLPB]
[    0.398069] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:27/PNP0C09:00/PNP0C0D:00/input/input1
[    0.398227] ACPI: Lid Switch [LID]
[    0.398352] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.398504] ACPI: Power Button [PWRF]
[    0.399216] Monitor-Mwait will be used to enter C-1 state
[    0.399219] Monitor-Mwait will be used to enter C-2 state
[    0.399222] Monitor-Mwait will be used to enter C-3 state
[    0.401934] thermal LNXTHERM:00: registered as thermal_zone0
[    0.402038] ACPI: Thermal Zone [THM0] (53 C)
[    0.403088] thermal LNXTHERM:01: registered as thermal_zone1
[    0.403187] ACPI: Thermal Zone [THM1] (27 C)
[    0.403827] [drm] Replacing VGA console driver
[    0.405130] Console: switching to colour dummy device 80x25
[    0.413769] ACPI: Battery Slot [BAT0] (battery present)
[    0.413892] ACPI: Battery Slot [BAT1] (battery absent)
[    0.458159] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.458166] [drm] Driver supports precise vblank timestamp query.
[    0.458448] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    0.499536] [drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 0
[    0.499677] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    0.500784] acpi device:0b: registered as cooling_device9
[    0.500838] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    0.502924] loop: module loaded
[    0.503013] ahci 0000:00:1f.2: version 3.0
[    0.503154] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.514073] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1f impl SATA mode
[    0.514080] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    0.514635] scsi host0: ahci
[    0.514871] scsi host1: ahci
[    0.514974] scsi host2: ahci
[    0.515051] scsi host3: ahci
[    0.515117] scsi host4: ahci
[    0.515198] scsi host5: ahci
[    0.515231] ata1: SATA max UDMA/133 abar m2048@0xe162e000 port 0xe162e100 irq 28
[    0.515235] ata2: SATA max UDMA/133 abar m2048@0xe162e000 port 0xe162e180 irq 28
[    0.515239] ata3: SATA max UDMA/133 abar m2048@0xe162e000 port 0xe162e200 irq 28
[    0.515243] ata4: SATA max UDMA/133 abar m2048@0xe162e000 port 0xe162e280 irq 28
[    0.515247] ata5: SATA max UDMA/133 abar m2048@0xe162e000 port 0xe162e300 irq 28
[    0.515249] ata6: DUMMY
[    0.515339] SSFDC read-only Flash Translation layer
[    0.515357] MACsec IEEE 802.1AE
[    0.515389] tun: Universal TUN/TAP device driver, 1.6
[    0.515435] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    0.515442] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.515463] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    0.515467] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.515534] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    0.622546] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    0.676037] fbcon: inteldrmfb (fb0) is primary device
[    0.717542] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:21:cc:c0:af:a4
[    0.717545] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    0.717598] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[    0.717620] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    0.717621] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.717707] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.717708] ehci-pci: EHCI PCI platform driver
[    0.717798] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.717953] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.717966] ehci-pci 0000:00:1a.0: debug port 2
[    0.721850] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.721863] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe162f000
[    0.728031] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.728094] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.728095] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.728096] usb usb1: Product: EHCI Host Controller
[    0.728097] usb usb1: Manufacturer: Linux 4.16.13-gentoo ehci_hcd
[    0.728098] usb usb1: SerialNumber: 0000:00:1a.0
[    0.728294] hub 1-0:1.0: USB hub found
[    0.728300] hub 1-0:1.0: 3 ports detected
[    0.728467] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.728590] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.728602] ehci-pci 0000:00:1d.0: debug port 2
[    0.732500] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.732512] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe1630000
[    0.739030] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.739083] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.739084] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.739085] usb usb2: Product: EHCI Host Controller
[    0.739086] usb usb2: Manufacturer: Linux 4.16.13-gentoo ehci_hcd
[    0.739087] usb usb2: SerialNumber: 0000:00:1d.0
[    0.739276] hub 2-0:1.0: USB hub found
[    0.739282] hub 2-0:1.0: 3 ports detected
[    0.739378] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.739382] ohci-pci: OHCI PCI platform driver
[    0.739391] uhci_hcd: USB Universal Host Controller Interface driver
[    0.739424] usbcore: registered new interface driver usblp
[    0.739438] usbcore: registered new interface driver usb-storage
[    0.739456] usbcore: registered new interface driver usbserial_generic
[    0.739467] usbserial: USB Serial support registered for generic
[    0.739475] usbcore: registered new interface driver usb_debug
[    0.739483] usbserial: USB Serial support registered for debug
[    0.739487] usbserial: USB Serial support registered for xhci_dbc
[    0.739499] usbcore: registered new interface driver pl2303
[    0.739508] usbserial: USB Serial support registered for pl2303
[    0.739520] usbcore: registered new interface driver usb_serial_simple
[    0.739527] usbserial: USB Serial support registered for carelink
[    0.739535] usbserial: USB Serial support registered for zio
[    0.739540] usbserial: USB Serial support registered for funsoft
[    0.739545] usbserial: USB Serial support registered for flashloader
[    0.739550] usbserial: USB Serial support registered for google
[    0.739555] usbserial: USB Serial support registered for libtransistor
[    0.739563] usbserial: USB Serial support registered for vivopay
[    0.739575] usbserial: USB Serial support registered for moto_modem
[    0.739583] usbserial: USB Serial support registered for motorola_tetra
[    0.739592] usbserial: USB Serial support registered for novatel_gps
[    0.739600] usbserial: USB Serial support registered for hp4x
[    0.739607] usbserial: USB Serial support registered for suunto
[    0.739611] usbserial: USB Serial support registered for siemens_mpi
[    0.739646] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.745495] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.745498] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.745632] mousedev: PS/2 mouse device common for all mice
[    0.746059] rtc_cmos 00:03: RTC can wake from S4
[    0.746178] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.746206] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.746333] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.746991] usbcore: registered new interface driver uvcvideo
[    0.746991] USB Video Class driver (1.1.1)
[    0.747092] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    0.747168] device-mapper: multipath round-robin: version 1.2.0 loaded
[    0.747169] device-mapper: multipath queue-length: version 0.2.0 loaded
[    0.747170] device-mapper: multipath service-time: version 0.3.0 loaded
[    0.747184] intel_pstate: Intel P-state driver initializing
[    0.747449] sdhci: Secure Digital Host Controller Interface driver
[    0.747449] sdhci: Copyright(c) Pierre Ossman
[    0.747469] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 8)
[    0.747850] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[    0.748083] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
[    0.748255] hidraw: raw HID events driver (C) Jiri Kosina
[    0.748646] usbcore: registered new interface driver usbhid
[    0.748647] usbhid: USB HID core driver
[    0.748898] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    0.748899] thinkpad_acpi: http://ibm-acpi.sf.net/
[    0.748900] thinkpad_acpi: ThinkPad BIOS CBET4000 4.8-361-gc07f8fbe6f, EC 83HT30WW-3.20
[    0.748901] thinkpad_acpi: Lenovo ThinkPad T420, model 4236W9B
[    0.749383] thinkpad_acpi: radio switch found; radios are enabled
[    0.749509] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[    0.749527] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    0.749528] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    0.750479] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.751076] thinkpad_acpi: warning: userspace override of important firmware LEDs is enabled
[    0.752328] random: fast init done
[    0.752569] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    0.752674] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    0.754382] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[    0.755176] u32 classifier
[    0.755177]     Actions configured
[    0.755748] Initializing XFRM netlink socket
[    0.755950] NET: Registered protocol family 10
[    0.756335] Segment Routing with IPv6
[    0.756537] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.756740] NET: Registered protocol family 17
[    0.756745] NET: Registered protocol family 15
[    0.756758] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    0.756890] Bluetooth: RFCOMM socket layer initialized
[    0.756896] Bluetooth: RFCOMM ver 1.11
[    0.756899] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    0.756902] Bluetooth: HIDP socket layer initialized
[    0.756926] l2tp_core: L2TP core driver, V2.0
[    0.756927] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[    0.756936] l2tp_netlink: L2TP netlink interface
[    0.756953] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[    0.756953] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[    0.757020] Key type dns_resolver registered
[    0.757788] microcode: sig=0x306a9, pf=0x10, revision=0x1f
[    0.757883] microcode: Microcode Update Driver: v2.2.
[    0.757902] AVX version of gcm_enc/dec engaged.
[    0.757903] AES CTR mode by8 optimization enabled
[    0.768594] sched_clock: Marking stable (768587055, 0)->(781842276, -13255221)
[    0.769019] registered taskstats version 1
[    0.769020] Loading compiled-in X.509 certificates
[    0.769320]   Magic number: 6:810:701
[    0.821073] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.821917] ata1.00: ATA-9: WDC WD10JPVX-00JC3T0, 01.01A01, max UDMA/133
[    0.821919] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    0.822849] ata1.00: configured for UDMA/133
[    0.976009] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops 0xffffffff820b0d80)
[    0.988088] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
[    0.988582] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[    0.988584] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    0.988585] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[    0.988586] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[    0.988588] snd_hda_codec_conexant hdaudioC0D0:    dig-out=0x20/0x22
[    0.988589] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[    0.988590] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x23
[    0.988592] snd_hda_codec_conexant hdaudioC0D0:      Dock Mic=0x1a
[    0.990081] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[    0.993458] snd_hda_codec_generic hdaudioC0D3: ignore pin 0x7, too many assigned pins
[    0.993461] snd_hda_codec_generic hdaudioC0D3: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[    0.993462] snd_hda_codec_generic hdaudioC0D3:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    0.993464] snd_hda_codec_generic hdaudioC0D3:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    0.993465] snd_hda_codec_generic hdaudioC0D3:    mono: mono_out=0x0
[    0.993466] snd_hda_codec_generic hdaudioC0D3:    dig-out=0x5/0x6
[    0.993467] snd_hda_codec_generic hdaudioC0D3:    inputs:
[    0.995301] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    0.995369] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    0.995434] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    0.995497] input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    0.995559] input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    0.998666] Console: switching to colour frame buffer device 200x56
[    1.049048] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.049872] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.057012] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.136467] console [netcon0] enabled
[    1.136593] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10JPVX-00J 1A01 PQ: 0 ANSI: 5
[    1.137331] netconsole: network logging started
[    1.138785] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.138914] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.138916] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.138933] sd 0:0:0:0: [sda] Write Protect is off
[    1.138935] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.138960] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.139751] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    1.151689] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    1.152609] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    1.153148] ALSA device list:
[    1.153519] platform regulatory.0: Falling back to user helper
[    1.154425]   #0: HDA Intel PCH at 0xe1628000 irq 30
[    1.156629]   #5: ThinkPad Console Audio Control at EC reg 0x30, fw 83HT30WW-3.20
[    1.202466] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.204357] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.205595] hub 1-1:1.0: USB hub found
[    1.206691] hub 1-1:1.0: 6 ports detected
[    1.207312] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.264505] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.266385] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.268940] hub 2-1:1.0: USB hub found
[    1.271225] hub 2-1:1.0: 8 ports detected
[    1.439093] tsc: Refined TSC clocksource calibration: 2195.013 MHz
[    1.441225] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa3cbf1da7, max_idle_ns: 440795275681 ns
[    1.443444] clocksource: Switched to clocksource tsc
[    1.452974] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.456118] ata2.00: ATA-9: WDC WD20NPVZ-00WFZT0, 01.01A01, max UDMA/133
[    1.458525] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.461739] ata2.00: configured for UDMA/133
[    1.463116] scsi 1:0:0:0: Direct-Access     ATA      WDC WD20NPVZ-00W 1A01 PQ: 0 ANSI: 5
[    1.464310] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.464349] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    1.466906] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    1.468324] sd 1:0:0:0: [sdb] Write Protect is off
[    1.470419] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.470442] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.479041] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[    1.533950] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.545115] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[    1.564727] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    1.568337] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[    1.570778] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.572321] usb 1-1.4: Product: Broadcom Bluetooth Device
[    1.573830] usb 1-1.4: Manufacturer: Broadcom Corp
[    1.575318] usb 1-1.4: SerialNumber: 402CF4E05EB0
[    1.590487] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7
[    1.627766] usb 2-1.3: string descriptor 0 read error: -22
[    1.630169] usb 2-1.3: New USB device found, idVendor=0489, idProduct=e04e
[    1.632545] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.699027] usb 2-1.5: new full-speed USB device number 4 using ehci-pci
[    1.773227] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.786112] usb 2-1.5: New USB device found, idVendor=17ef, idProduct=1003
[    1.788503] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.788612] ata3.00: ATA-8: KINGSTON SMS200S3240G, 60AABBF0, max UDMA/133
[    1.790853] usb 2-1.5: Product: Integrated Smart Card Reader
[    1.790856] usb 2-1.5: Manufacturer: Lenovo
[    1.797930] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.805524] ata3.00: configured for UDMA/133
[    1.808157] scsi 2:0:0:0: Direct-Access     ATA      KINGSTON SMS200S BBF0 PQ: 0 ANSI: 5
[    1.811166] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    1.811314] sd 2:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    1.814437] sd 2:0:0:0: [sdc] Write Protect is off
[    1.815539] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.815559] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.818117]  sdc: sdc1 sdc2 sdc3
[    1.819489] sd 2:0:0:0: [sdc] Attached SCSI disk
[    2.117598] ata4: SATA link down (SStatus 0 SControl 300)
[    2.429576] ata5: SATA link down (SStatus 0 SControl 300)
[    2.433678] Freeing unused kernel memory: 1280K
[    2.436019] Write protecting the kernel read-only data: 20480k
[    2.439302] Freeing unused kernel memory: 1972K
[    2.443463] Freeing unused kernel memory: 448K
[    3.533803] fuse init (API version 7.26)
[    3.534130] modprobe (4044) used greatest stack depth: 14216 bytes left
[    3.772212] random: lvm: uninitialized urandom read (4 bytes read)
[    3.894788] lvm (4326) used greatest stack depth: 13656 bytes left
[    5.248690] random: crng init done
[   13.016456] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[   13.016619] mount (4378) used greatest stack depth: 13592 bytes left
[   13.026239] init (4387) used greatest stack depth: 13544 bytes left
[   13.161646] loadkeys (4403) used greatest stack depth: 13480 bytes left
[   13.161996] init-early.sh (4400) used greatest stack depth: 13232 bytes left
[   14.670752] udevd[4955]: starting version 3.2.5
[   14.689183] udevd[4955]: specified group 'colord' unknown
[   14.723420] udevd[4956]: starting eudev-3.2.5
[   14.787022] udevd[4956]: specified group 'colord' unknown
[   14.802795] udevadm (4992) used greatest stack depth: 13112 bytes left
[   14.819499] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[   14.857359] ath: phy0: ASPM enabled: 0x43
[   14.857362] ath: EEPROM regdomain: 0x6c
[   14.857363] ath: EEPROM indicates we should expect a direct regpair map
[   14.857365] ath: Country alpha2 being used: 00
[   14.857365] ath: Regpair used: 0x6c
[   14.858103] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   14.858424] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90001c00000, irq=17
[   14.886979] ath9k 0000:01:00.0 wlp1s0: renamed from wlan0
[   14.892913] vboxdrv: loading out-of-tree module taints kernel.
[   14.894152] vboxdrv: Found 8 processor cores
[   14.895910] usbcore: registered new interface driver btusb
[   14.911166] vboxdrv: TSC mode is Invariant, tentative frequency 2195013503 Hz
[   14.911167] vboxdrv: Successfully loaded version 5.1.36 (interface 0x002a0000)
[   14.912449] VBoxNetFlt: Successfully started.
[   14.918091] VBoxNetAdp: Successfully started.
[   14.929135] VBoxPciLinuxInit
[   14.929142] vboxpci: pci-stub module not available, cannot detach PCI devices
[   14.929143] vboxpci: IOMMU not found (not registered)
[   15.023925] hdaps: supported laptop not found!
[   15.023927] hdaps: driver init failed (ret=-19)!
[   15.072365] i2c /dev entries driver
[   15.113469] usbcore: registered new interface driver cdc_ether
[   15.126939] usbcore: registered new interface driver cdc_acm
[   15.126940] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   15.139516] usbcore: registered new interface driver ipheth
[   15.151831] usbcore: registered new interface driver cdc_subset
[   15.176845] usbcore: registered new interface driver rndis_host
[   15.350322] Intel(R) Wireless WiFi driver for Linux
[   15.350324] Copyright(c) 2003- 2015 Intel Corporation
[   16.493747] EXT4-fs (dm-3): re-mounted. Opts: discard
[   16.616887] Adding 4194300k swap on /dev/mapper/vg-swap.  Priority:-2 extents:1 across:4194300k SS
[   17.344814] ip (6045) used greatest stack depth: 12872 bytes left
[   21.272650] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[   33.388082] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   33.388266] ip (6490) used greatest stack depth: 12800 bytes left
[   37.616928] wlp1s0: authenticate with 64:d1:54:78:39:b7
[   37.630509] wlp1s0: send auth to 64:d1:54:78:39:b7 (try 1/3)
[   37.631433] wlp1s0: authenticated
[   37.632040] wlp1s0: associate with 64:d1:54:78:39:b7 (try 1/3)
[   37.634710] wlp1s0: RX AssocResp from 64:d1:54:78:39:b7 (capab=0x431 status=0 aid=2)
[   37.634855] wlp1s0: associated
[   37.652447] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[   62.431040] cfg80211: failed to load regulatory.db
[   62.431049] cfg80211: failed to load regulatory.db
[   62.431053] cfg80211: failed to load regulatory.db
[   62.431100] cfg80211: failed to load regulatory.db
[  155.785099] usb 2-1.1: new low-speed USB device number 5 using ehci-pci
[  155.867316] usb 2-1.1: New USB device found, idVendor=04ca, idProduct=0061
[  155.867321] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  155.867323] usb 2-1.1: Product: USB Optical Mouse
[  155.867326] usb 2-1.1: Manufacturer: PixArt
[  155.869687] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:04CA:0061.0001/input/input13
[  155.869915] hid-generic 0003:04CA:0061.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0