[    0.000000] Linux version 4.9.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170321 (Debian 6.3.0-11) ) #1 SMP Debian 4.9.18-1 (2017-03-30)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.0-2-amd64 root=UUID=77460594-bbda-42b7-a1d9-13c1e52e356e ro quiet iomem=relaxed
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x000000007ff0dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ff0e000-0x000000007fffffff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008e9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000046f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 4180DW1/4180DW1, BIOS CBET4000 4.5-1640-g7e438af995 04/25/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x46f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 080000000 mask FC0000000 uncachable
[    0.000000]   1 base 0C0000000 mask FE0000000 uncachable
[    0.000000]   2 base 0E0000000 mask FF0000000 write-combining
[    0.000000]   3 base 0F0000000 mask FF0000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x7ff0e max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff88bd40099000] 99000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x247f2b000, 0x247f2bfff] PGTABLE
[    0.000000] BRK [0x247f2c000, 0x247f2cfff] PGTABLE
[    0.000000] BRK [0x247f2d000, 0x247f2dfff] PGTABLE
[    0.000000] BRK [0x247f2e000, 0x247f2efff] PGTABLE
[    0.000000] BRK [0x247f2f000, 0x247f2ffff] PGTABLE
[    0.000000] BRK [0x247f30000, 0x247f30fff] PGTABLE
[    0.000000] BRK [0x247f31000, 0x247f31fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35c83000-0x36e38fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F64B0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x000000007FF220E0 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x000000007FF256F0 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x000000007FF22280 00346D (v02 COREv4 COREBOOT 20110725 INTL 20161222)
[    0.000000] ACPI: FACS 0x000000007FF22240 000040
[    0.000000] ACPI: FACS 0x000000007FF22240 000040
[    0.000000] ACPI: SSDT 0x000000007FF257F0 00171C (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: MCFG 0x000000007FF26F10 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: TCPA 0x000000007FF26F50 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x000000007FF26F90 00006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DMAR 0x000000007FF27000 0000A8 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x000000007FF270B0 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000046f5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x46f5ee000-0x46f5f2fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000046f5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x000000007ff0dfff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000046f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000046f5fffff]
[    0.000000] On node 0 totalpages: 4124845
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 159 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8109 pages used for memmap
[    0.000000]   DMA32 zone: 518926 pages, LIFO batch:31
[    0.000000]   Normal zone: 56280 pages used for memmap
[    0.000000]   Normal zone: 3601920 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x0000000080a00000-0x000000008e9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ff0e000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0x8e9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x8ea00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[    0.000000] e820: [mem 0x8ea00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff88c1af200000 s103384 r8192 d31784 u524288
[    0.000000] pcpu-alloc: s103384 r8192 d31784 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 4060233
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-2-amd64 root=UUID=77460594-bbda-42b7-a1d9-13c1e52e356e ro quiet iomem=relaxed
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16140328K/16499380K available (6143K kernel code, 1129K rwdata, 2844K rodata, 1392K init, 684K bss, 359052K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:456 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2494.258 MHz processor
[    0.000026] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.51 BogoMIPS (lpj=9977032)
[    0.000028] pid_max: default: 32768 minimum: 301
[    0.000042] ACPI: Core revision 20160831
[    0.002811] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.002856] Security Framework initialized
[    0.002857] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.002864] AppArmor: AppArmor disabled by boot time parameter
[    0.003683] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.006793] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.008163] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.008178] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.008472] CPU: Physical Processor ID: 0
[    0.008473] CPU: Processor Core ID: 0
[    0.008478] mce: CPU supports 7 MCE banks
[    0.008487] CPU0: Thermal monitoring enabled (TM1)
[    0.008495] process: using mwait in idle threads
[    0.008498] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.008499] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.008893] Freeing SMP alternatives memory: 24K (ffffffffb2078000 - ffffffffb207e000)
[    0.011220] ftrace: allocating 25004 entries in 98 pages
[    0.023328] smpboot: Max logical packages: 2
[    0.023338] DMAR: Host address width 36
[    0.023339] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.023344] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.023345] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.023349] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.023350] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.023351] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.023352] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.023684] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.023686] x2apic enabled
[    0.023692] Switched APIC routing to cluster x2apic.
[    0.024155] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.063845] TSC deadline timer enabled
[    0.063848] smpboot: CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.063851] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.063881] ... version:                3
[    0.063882] ... bit width:              48
[    0.063883] ... generic registers:      4
[    0.063883] ... value mask:             0000ffffffffffff
[    0.063884] ... max period:             00007fffffffffff
[    0.063884] ... fixed-purpose events:   3
[    0.063885] ... event mask:             000000070000000f
[    0.064457] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.064566] x86: Booting SMP configuration:
[    0.064567] .... node  #0, CPUs:      #1 #2 #3
[    0.305977] x86: Booted up 1 node, 4 CPUs
[    0.305980] smpboot: Total of 4 processors activated (19957.54 BogoMIPS)
[    0.309349] devtmpfs: initialized
[    0.309419] x86/mm: Memory block size: 128MB
[    0.313066] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.313076] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.313116] pinctrl core: initialized pinctrl subsystem
[    0.313228] NET: Registered protocol family 16
[    0.324830] cpuidle: using governor ladder
[    0.340840] cpuidle: using governor menu
[    0.340913] ACPI: bus type PCI registered
[    0.340916] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.341010] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.341012] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.341020] PCI: Using configuration type 1 for base access
[    0.341056] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.357068] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.357294] ACPI: Added _OSI(Module Device)
[    0.357294] ACPI: Added _OSI(Processor Device)
[    0.357295] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.357296] ACPI: Added _OSI(Processor Aggregator Device)
[    0.357441] ACPI: Executed 1 blocks of module-level executable AML code
[    0.359528] ACPI : EC: EC started
[    0.359529] ACPI : EC: interrupt blocked
[    0.359577] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.359578] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.359580] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.359580] ACPI: Interpreter enabled
[    0.359597] ACPI: (supports S0 S3 S4 S5)
[    0.359597] ACPI: Using IOAPIC for interrupt routing
[    0.359618] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.364933] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.364937] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.364986] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.364995] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.365047] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c69ff])
[    0.365196] PCI host bridge to bus 0000:00
[    0.365198] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.365200] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.365201] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.365202] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.365203] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.365204] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.365205] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.365206] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.365207] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.365208] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.365209] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.365211] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.365212] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.365213] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.365214] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.365215] pci_bus 0000:00: root bus resource [mem 0x8ea00000-0xf7ffffff window]
[    0.365216] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.365218] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.365225] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.365316] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.365343] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.365412] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[    0.365421] pci 0000:00:02.0: reg 0x10: [mem 0xf1400000-0xf17fffff 64bit]
[    0.365426] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.365429] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.365508] pci 0000:00:04.0: [8086:0103] type 00 class 0x118000
[    0.365517] pci 0000:00:04.0: reg 0x10: [mem 0xf1a20000-0xf1a27fff 64bit]
[    0.365620] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.365635] pci 0000:00:19.0: reg 0x10: [mem 0xf1a00000-0xf1a1ffff]
[    0.365643] pci 0000:00:19.0: reg 0x14: [mem 0xf1a2c000-0xf1a2cfff]
[    0.365652] pci 0000:00:19.0: reg 0x18: [io  0x3040-0x305f]
[    0.365711] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.365783] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.365800] pci 0000:00:1a.0: reg 0x10: [mem 0xf1a2f000-0xf1a2f3ff]
[    0.365883] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.365922] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.365965] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.365982] pci 0000:00:1b.0: reg 0x10: [mem 0xf1a28000-0xf1a2bfff 64bit]
[    0.366059] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.366102] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.366144] pci 0000:00:1c.0: [8086:1c12] type 01 class 0x060400
[    0.366219] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.366300] pci 0000:00:1c.1: [8086:1c16] type 01 class 0x060400
[    0.366374] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.366458] pci 0000:00:1c.3: [8086:1c18] type 01 class 0x060400
[    0.366584] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.366678] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.366696] pci 0000:00:1d.0: reg 0x10: [mem 0xf1a30000-0xf1a303ff]
[    0.366779] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.366817] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.366860] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[    0.367027] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.367044] pci 0000:00:1f.2: reg 0x10: [io  0x3080-0x3087]
[    0.367052] pci 0000:00:1f.2: reg 0x14: [io  0x3090-0x3093]
[    0.367060] pci 0000:00:1f.2: reg 0x18: [io  0x3088-0x308f]
[    0.367069] pci 0000:00:1f.2: reg 0x1c: [io  0x3094-0x3097]
[    0.367077] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.367085] pci 0000:00:1f.2: reg 0x24: [mem 0xf1a2e000-0xf1a2e7ff]
[    0.367130] pci 0000:00:1f.2: PME# supported from D3hot
[    0.367202] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.367218] pci 0000:00:1f.3: reg 0x10: [mem 0xf1a31000-0xf1a310ff 64bit]
[    0.367239] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.367328] pci 0000:00:1f.6: [8086:1c24] type 00 class 0x118000
[    0.367348] pci 0000:00:1f.6: reg 0x10: [mem 0xf1a2d000-0xf1a2dfff 64bit]
[    0.367490] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.367570] pci 0000:02:00.0: [168c:0030] type 00 class 0x028000
[    0.367618] pci 0000:02:00.0: reg 0x10: [mem 0xf1800000-0xf181ffff 64bit]
[    0.367702] pci 0000:02:00.0: reg 0x30: [mem 0xf1820000-0xf182ffff pref]
[    0.367821] pci 0000:02:00.0: supports D1
[    0.367822] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[    0.378056] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.378070] pci 0000:00:1c.0:   bridge window [mem 0xf1800000-0xf18fffff]
[    0.378204] pci 0000:03:00.0: [1912:0015] type 00 class 0x0c0330
[    0.378260] pci 0000:03:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[    0.378526] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.390065] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.390079] pci 0000:00:1c.1:   bridge window [mem 0xf1900000-0xf19fffff]
[    0.390237] pci 0000:04:00.0: [1180:e822] type 00 class 0x080501
[    0.390271] pci 0000:04:00.0: MMC controller base frequency changed to 50Mhz.
[    0.390309] pci 0000:04:00.0: reg 0x10: [mem 0xf0800000-0xf08000ff]
[    0.390612] pci 0000:04:00.0: supports D1 D2
[    0.390613] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.402072] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.402080] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.402089] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf08fffff]
[    0.402103] pci 0000:00:1c.3:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.402248] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.402296] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.402340] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.402385] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.402431] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.402475] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.402519] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.402564] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.403317] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.403435] ACPI : EC: interrupt unblocked
[    0.403441] ACPI : EC: event unblocked
[    0.403447] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.403448] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.403551] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.403552] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.403554] vgaarb: loaded
[    0.403555] vgaarb: bridge control possible 0000:00:02.0
[    0.403627] PCI: Using ACPI for IRQ routing
[    0.405110] PCI: pci_cache_line_size set to 64 bytes
[    0.405196] e820: reserve RAM buffer [mem 0x7ff0e000-0x7fffffff]
[    0.405197] e820: reserve RAM buffer [mem 0x46f600000-0x46fffffff]
[    0.405347] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.405352] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.407374] clocksource: Switched to clocksource hpet
[    0.413845] VFS: Disk quotas dquot_6.6.0
[    0.413874] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.413960] pnp: PnP ACPI init
[    0.414059] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.414061] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.414062] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.414063] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.414065] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.414066] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.414068] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.414069] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.414070] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
[    0.414072] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
[    0.414075] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.414622] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.414625] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.414668] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.414669] system 00:02: [io  0x0480-0x04bf] has been reserved
[    0.414671] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.414695] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.414730] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.414760] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.414791] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[    0.414810] pnp: PnP ACPI: found 7 devices
[    0.421258] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.421296] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.421303] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.421308] pci 0000:00:1c.0:   bridge window [mem 0xf1800000-0xf18fffff]
[    0.421319] pci 0000:03:00.0: BAR 0: assigned [mem 0xf1900000-0xf1901fff 64bit]
[    0.421349] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.421354] pci 0000:00:1c.1:   bridge window [mem 0xf1900000-0xf19fffff]
[    0.421362] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.421365] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.421372] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf08fffff]
[    0.421376] pci 0000:00:1c.3:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.421385] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.421386] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.421388] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.421389] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.421390] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[    0.421391] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[    0.421392] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.421393] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.421394] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.421396] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.421397] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.421398] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.421399] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.421400] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[    0.421401] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.421403] pci_bus 0000:00: resource 19 [mem 0x8ea00000-0xf7ffffff window]
[    0.421404] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[    0.421405] pci_bus 0000:02: resource 1 [mem 0xf1800000-0xf18fffff]
[    0.421407] pci_bus 0000:03: resource 1 [mem 0xf1900000-0xf19fffff]
[    0.421408] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    0.421409] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf08fffff]
[    0.421410] pci_bus 0000:04: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.421499] NET: Registered protocol family 2
[    0.421693] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.421916] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.422039] TCP: Hash tables configured (established 131072 bind 65536)
[    0.422073] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.422122] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.422218] NET: Registered protocol family 1
[    0.422235] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.422686] pci 0000:03:00.0: enabling device (0000 -> 0002)
[    0.423146] PCI: CLS 64 bytes, default 64
[    0.423195] Unpacking initramfs...
[    0.737669] Freeing initrd memory: 18136K (ffff88bd75c83000 - ffff88bd76e39000)
[    0.737714] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.737716] software IO TLB [mem 0x7bf0e000-0x7ff0e000] (64MB) mapped at [ffff88bdbbf0e000-ffff88bdbff0dfff]
[    0.738066] audit: initializing netlink subsys (disabled)
[    0.738082] audit: type=2000 audit(1493282998.732:1): initialized
[    0.738379] Initialise system trusted keyrings
[    0.738471] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    0.738513] zbud: loaded
[    0.785555] Key type asymmetric registered
[    0.785556] Asymmetric key parser 'x509' registered
[    0.785575] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.785605] io scheduler noop registered
[    0.785606] io scheduler deadline registered
[    0.785622] io scheduler cfq registered (default)
[    0.786380] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    0.786382] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded
[    0.786403] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.786404] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.786408] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[    0.786424] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.786425] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.786429] pcie_pme 0000:00:1c.1:pcie001: service driver pcie_pme loaded
[    0.786448] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.786449] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    0.786454] pcie_pme 0000:00:1c.3:pcie001: service driver pcie_pme loaded
[    0.786462] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.786475] pciehp 0000:00:1c.3:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.786503] pciehp 0000:00:1c.3:pcie004: service driver pciehp loaded
[    0.786508] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.786521] efifb: probing for efifb
[    0.786532] efifb: framebuffer at 0xe0000000, using 5632k, total 5632k
[    0.786533] efifb: mode is 1600x900x32, linelength=6400, pages=1
[    0.786534] efifb: scrolling: redraw
[    0.786535] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.789747] Console: switching to colour frame buffer device 200x56
[    0.792843] fb0: EFI VGA frame buffer device
[    0.792850] intel_idle: MWAIT substates: 0x21120
[    0.792852] intel_idle: v0.4.1 model 0x2A
[    0.793014] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.793378] GHES: HEST is not enabled!
[    0.793430] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.793833] Linux agpgart interface v0.103
[    0.793875] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.793875] AMD IOMMUv2 functionality not available on this system
[    0.794218] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.797184] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.797188] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.797340] mousedev: PS/2 mouse device common for all mice
[    0.797368] rtc_cmos 00:03: RTC can wake from S4
[    0.797524] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.797558] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.797570] intel_pstate: Intel P-state driver initializing
[    0.797771] ledtrig-cpu: registered to indicate activity on CPUs
[    0.798323] NET: Registered protocol family 10
[    0.798988] mip6: Mobile IPv6
[    0.798993] NET: Registered protocol family 17
[    0.799000] mpls_gso: MPLS GSO support
[    0.799590] microcode: sig=0x206a7, pf=0x10, revision=0x29
[    0.799825] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.800334] registered taskstats version 1
[    0.800337] Loading compiled-in X.509 certificates
[    0.801248] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.804277] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    0.805154] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    0.805199] zswap: loaded using pool lzo/zbud
[    0.806079] rtc_cmos 00:03: setting system clock to 2017-04-27 08:49:59 UTC (1493282999)
[    0.806214] PM: Hibernation image not present or could not be loaded.
[    0.810108] Freeing unused kernel memory: 1392K (ffffffffb1f1c000 - ffffffffb2078000)
[    0.810111] Write protecting the kernel read-only data: 12288k
[    0.811554] Freeing unused kernel memory: 2032K (ffff88bf87604000 - ffff88bf87800000)
[    0.819517] Freeing unused kernel memory: 1252K (ffff88bf87ac7000 - ffff88bf87c00000)
[    0.833952] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.859972] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.860094] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.860110] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.860127] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.861543] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.861604] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.863738] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.863833] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.863859] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.864332] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.899301] thermal LNXTHERM:00: registered as thermal_zone0
[    0.899302] ACPI: Thermal Zone [THM0] (64 C)
[    0.899555] pps_core: LinuxPPS API ver. 1 registered
[    0.899556] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.900205] thermal LNXTHERM:01: registered as thermal_zone1
[    0.900206] ACPI: Thermal Zone [THM1] (27 C)
[    0.900342] PTP clock support registered
[    0.906998] ACPI: bus type USB registered
[    0.907026] usbcore: registered new interface driver usbfs
[    0.907038] usbcore: registered new interface driver hub
[    0.907069] usbcore: registered new device driver usb
[    0.907326] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    0.907327] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.907435] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    0.907458] sdhci: Secure Digital Host Controller Interface driver
[    0.907459] sdhci: Copyright(c) Pierre Ossman
[    0.908724] sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e822] (rev 8)
[    0.909540] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.910279] ehci-pci: EHCI PCI platform driver
[    0.912918] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.912925] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
[    0.913113] mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA
[    0.918282] xhci_hcd 0000:03:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[    0.918576] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.918577] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.918579] usb usb1: Product: xHCI Host Controller
[    0.918580] usb usb1: Manufacturer: Linux 4.9.0-2-amd64 xhci-hcd
[    0.918581] usb usb1: SerialNumber: 0000:03:00.0
[    0.918721] hub 1-0:1.0: USB hub found
[    0.918734] hub 1-0:1.0: 2 ports detected
[    0.918858] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.918862] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[    0.924733] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.924761] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.924763] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.924764] usb usb2: Product: xHCI Host Controller
[    0.924766] usb usb2: Manufacturer: Linux 4.9.0-2-amd64 xhci-hcd
[    0.924767] usb usb2: SerialNumber: 0000:03:00.0
[    0.925031] hub 2-0:1.0: USB hub found
[    0.925045] hub 2-0:1.0: 2 ports detected
[    0.927550] SCSI subsystem initialized
[    0.929725] AVX version of gcm_enc/dec engaged.
[    0.929727] AES CTR mode by8 optimization enabled
[    0.934686] libata version 3.00 loaded.
[    0.937957] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.065734] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    1.191642] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:21:cc:be:13:ad
[    1.191647] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.191714] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[    1.192173] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.192195] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.192224] ehci-pci 0000:00:1a.0: debug port 2
[    1.196156] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.196215] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf1a2f000
[    1.211507] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.211661] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.211665] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.211669] usb usb3: Product: EHCI Host Controller
[    1.211672] usb usb3: Manufacturer: Linux 4.9.0-2-amd64 ehci_hcd
[    1.211674] usb usb3: SerialNumber: 0000:00:1a.0
[    1.212196] hub 3-0:1.0: USB hub found
[    1.212211] hub 3-0:1.0: 3 ports detected
[    1.212847] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.212860] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    1.212883] ehci-pci 0000:00:1d.0: debug port 2
[    1.216813] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.216860] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf1a30000
[    1.231520] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.231653] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    1.231657] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.231660] usb usb4: Product: EHCI Host Controller
[    1.231663] usb usb4: Manufacturer: Linux 4.9.0-2-amd64 ehci_hcd
[    1.231665] usb usb4: SerialNumber: 0000:00:1d.0
[    1.232161] hub 4-0:1.0: USB hub found
[    1.232176] hub 4-0:1.0: 3 ports detected
[    1.233018] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.235383] ahci 0000:00:1f.2: version 3.0
[    1.235970] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.246168] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1f impl SATA mode
[    1.246174] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    1.247941] scsi host0: ahci
[    1.248258] scsi host1: ahci
[    1.248594] scsi host2: ahci
[    1.248823] scsi host3: ahci
[    1.249052] scsi host4: ahci
[    1.249261] scsi host5: ahci
[    1.249398] ata1: SATA max UDMA/133 abar m2048@0xf1a2e000 port 0xf1a2e100 irq 36
[    1.249404] ata2: SATA max UDMA/133 abar m2048@0xf1a2e000 port 0xf1a2e180 irq 36
[    1.249408] ata3: SATA max UDMA/133 abar m2048@0xf1a2e000 port 0xf1a2e200 irq 36
[    1.249412] ata4: SATA max UDMA/133 abar m2048@0xf1a2e000 port 0xf1a2e280 irq 36
[    1.249416] ata5: SATA max UDMA/133 abar m2048@0xf1a2e000 port 0xf1a2e300 irq 36
[    1.249418] ata6: DUMMY
[    1.539546] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    1.559518] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    1.563544] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.564472] ata1.00: ATA-9: WDC WD5000LPVX-22V0TT0, 01.01A01, max UDMA/133
[    1.564478] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.565327] ata1.00: configured for UDMA/133
[    1.565996] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000LPVX-2 1A01 PQ: 0 ANSI: 5
[    1.688258] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[    1.688264] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.688962] hub 3-1:1.0: USB hub found
[    1.690191] hub 3-1:1.0: 6 ports detected
[    1.708280] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[    1.708286] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.708946] hub 4-1:1.0: USB hub found
[    1.709094] hub 4-1:1.0: 8 ports detected
[    1.763553] tsc: Refined TSC clocksource calibration: 2494.333 MHz
[    1.763573] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f45085418, max_idle_ns: 440795285711 ns
[    1.911530] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.915075] ata2.00: ATAPI: HL-DT-ST DVDRAM GT50N, LT20, max UDMA/33
[    1.920674] ata2.00: configured for UDMA/33
[    1.929941] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT50N     LT20 PQ: 0 ANSI: 5
[    1.975544] usb 3-1.4: new full-speed USB device number 3 using ehci-pci
[    2.089366] usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[    2.089372] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.089376] usb 3-1.4: Product: Broadcom Bluetooth Device
[    2.089379] usb 3-1.4: Manufacturer: Broadcom Corp
[    2.089381] usb 3-1.4: SerialNumber: 7CE9D3BDD6A4
[    2.167545] usb 3-1.6: new high-speed USB device number 4 using ehci-pci
[    2.259482] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.260349] ata3.00: ATA-8: SanDisk SD5SF2032G1010E, 10.01.10, max UDMA/133
[    2.260355] ata3.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.261304] ata3.00: configured for UDMA/133
[    2.262026] scsi 2:0:0:0: Direct-Access     ATA      SanDisk SD5SF203 1.10 PQ: 0 ANSI: 5
[    2.282349] usb 3-1.6: New USB device found, idVendor=04f2, idProduct=b221
[    2.282355] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.282358] usb 3-1.6: Product: Integrated Camera
[    2.282361] usb 3-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[    2.615648] ata4: SATA link down (SStatus 0 SControl 300)
[    2.787864] clocksource: Switched to clocksource tsc
[    2.931512] ata5: SATA link down (SStatus 0 SControl 300)
[    2.942824] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    2.942832] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.942939] sd 0:0:0:0: [sda] Write Protect is off
[    2.942947] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.942995] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.943518] sd 2:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[    2.943709] sd 2:0:0:0: [sdb] Write Protect is off
[    2.943714] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.943770] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.950652]  sdb: sdb1 sdb2 sdb3 sdb5 sdb6 sdb7
[    2.951755] sd 2:0:0:0: [sdb] Attached SCSI disk
[    2.958482] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.958485] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.958808] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.962879] random: fast init done
[    2.993475]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
[    2.994630] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.685676] PM: Starting manual resume from disk
[    3.685683] PM: Hibernation image partition 8:2 present
[    3.685684] PM: Looking for hibernation image.
[    3.685928] PM: Image not found (code -22)
[    3.685930] PM: Hibernation image not present or could not be loaded.
[    3.792930] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[    4.153858] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.178744] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    4.178929] systemd[1]: Detected architecture x86-64.
[    4.196788] systemd[1]: Set hostname to <universi-lnvx60>.
[    4.700435] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.700547] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.700687] systemd[1]: Listening on Journal Audit Socket.
[    4.700713] systemd[1]: Reached target User and Group Name Lookups.
[    4.700759] systemd[1]: Listening on fsck to fsckd communication Socket.
[    4.700820] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    4.700886] systemd[1]: Listening on Journal Socket.
[    4.775729] EXT4-fs (sdb5): re-mounted. Opts: discard,user_xattr,errors=remount-ro
[    4.807623] lp: driver loaded but no devices found
[    4.814869] ppdev: user-space parallel port driver
[    4.863712] loop: module loaded
[    4.870475] RPC: Registered named UNIX socket transport module.
[    4.870476] RPC: Registered udp transport module.
[    4.870477] RPC: Registered tcp transport module.
[    4.870477] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    5.066860] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input4
[    5.066864] ACPI: Sleep Button [SLPB]
[    5.067023] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input5
[    5.067113] ACPI: Lid Switch [LID]
[    5.067154] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    5.067156] ACPI: Power Button [PWRF]
[    5.080346] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.094165] ACPI: AC Adapter [AC] (on-line)
[    5.095586] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[    5.107275] ACPI: Battery Slot [BAT0] (battery present)
[    5.108763] ACPI: Battery Slot [BAT1] (battery absent)
[    5.121750] [drm] Initialized
[    5.122854] Non-volatile memory driver v1.3
[    5.129598] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.131577] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    5.131662] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    5.132585] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20160831/utaddress-247)
[    5.132589] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.132592] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[    5.132594] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.132595] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[    5.132597] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.132597] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[    5.132600] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.132601] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    5.153231] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    5.153232] thinkpad_acpi: http://ibm-acpi.sf.net/
[    5.153233] thinkpad_acpi: ThinkPad BIOS CBET4000 4.5-1640-g7e438af995, EC 83HT30WW-3.20
[    5.153234] thinkpad_acpi: Lenovo ThinkPad T420, model 4180DW1
[    5.156125] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[    5.156185] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    5.156186] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    5.157995] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    5.158127] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    5.159110] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[    5.217041] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
[    5.217516] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[    5.217518] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.217520] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[    5.217522] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[    5.217523] snd_hda_codec_conexant hdaudioC0D0:    dig-out=0x20/0x22
[    5.217524] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[    5.217526] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x23
[    5.217528] snd_hda_codec_conexant hdaudioC0D0:      Dock Mic=0x1a
[    5.219069] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[    5.248535] [drm] Memory usable by graphics device = 2048M
[    5.248538] checking generic (e0000000 580000) vs hw (e0000000 10000000)
[    5.248539] fb: switching to inteldrmfb from EFI VGA
[    5.248586] Console: switching to colour dummy device 80x25
[    5.250389] [drm] Replacing VGA console driver
[    5.251184] input: PC Speaker as /devices/platform/pcspkr/input/input9
[    5.257684] media: Linux media interface: v0.10
[    5.257749] Bluetooth: Core ver 2.22
[    5.257762] NET: Registered protocol family 31
[    5.257763] Bluetooth: HCI device and connection manager initialized
[    5.257766] Bluetooth: HCI socket layer initialized
[    5.257768] Bluetooth: L2CAP socket layer initialized
[    5.257774] Bluetooth: SCO socket layer initialized
[    5.268059] Linux video capture interface: v2.00
[    5.288514] random: crng init done
[    5.292441] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    5.292444] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    5.292444] RAPL PMU: hw unit of domain package 2^-16 Joules
[    5.292445] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    5.292532] usbcore: registered new interface driver btusb
[    5.307589] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.307590] [drm] Driver supports precise vblank timestamp query.
[    5.307596] i915 0000:00:02.0: Invalid PCI ROM data signature: expecting 0x52494350, got 0xe935aa55
[    5.307602] [drm] failed to find VBIOS tables
[    5.307865] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    5.351569] ath: phy0: ASPM enabled: 0x43
[    5.351572] ath: EEPROM regdomain: 0x6a
[    5.351572] ath: EEPROM indicates we should expect a direct regpair map
[    5.351574] ath: Country alpha2 being used: 00
[    5.351575] ath: Regpair used: 0x6a
[    5.354811] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b221)
[    5.356979] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    5.357893] uvcvideo 3-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[    5.357897] uvcvideo 3-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[    5.357899] uvcvideo 3-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[    5.358053] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input13
[    5.358132] usbcore: registered new interface driver uvcvideo
[    5.358133] USB Video Class driver (1.1.1)
[    5.359839] acpi device:03: registered as cooling_device4
[    5.359921] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
[    5.364830] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    5.365088] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffa1f742200000, irq=17
[    5.460319] iTCO_vendor_support: vendor-support=0
[    5.468853] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    5.468894] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0560)
[    5.468974] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.476928] intel_rapl: Found RAPL domain package
[    5.476930] intel_rapl: Found RAPL domain core
[    5.476931] intel_rapl: Found RAPL domain uncore
[    5.554593] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.554602] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    5.565241] EXT4-fs (sdb3): mounting ext2 file system using the ext4 subsystem
[    5.576953] EXT4-fs (sdb3): mounted filesystem without journal. Opts: user_xattr
[    5.584105] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    5.612488] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    5.619732] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    5.619785] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    5.619832] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    5.619880] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    5.619927] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    5.619974] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    5.741122] fbcon: inteldrmfb (fb0) is primary device
[    5.863048] Adding 14871548k swap on /dev/sda2.  Priority:-1 extents:1 across:14871548k FS
[    6.430298] Console: switching to colour frame buffer device 200x56
[    6.455509] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    7.352793] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: user_xattr
[    7.443707] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    7.452625] systemd-journald[233]: Received request to flush runtime journal from PID 1
[    7.634757] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: user_xattr
[    7.667418] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: user_xattr
[    8.196920] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: user_xattr
[    8.342703] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: user_xattr
[    8.798492] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    8.798494] Bluetooth: BNEP filters: protocol multicast
[    8.798499] Bluetooth: BNEP socket layer initialized
[   10.420258] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.683854] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.690947] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   10.703130] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   10.720788] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   10.938095] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.630784] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.657314] wlan0: authenticate with f8:1a:67:5a:c4:75
[   14.671593] wlan0: send auth to f8:1a:67:5a:c4:75 (try 1/3)
[   14.672939] wlan0: authenticated
[   14.675820] wlan0: associate with f8:1a:67:5a:c4:75 (try 1/3)
[   14.677328] wlan0: RX AssocResp from f8:1a:67:5a:c4:75 (capab=0x11 status=0 aid=1)
[   14.677455] wlan0: associated
[   14.677463] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   14.694272] ath: EEPROM regdomain: 0x809c
[   14.694274] ath: EEPROM indicates we should expect a country code
[   14.694275] ath: doing EEPROM country->regdmn map search
[   14.694276] ath: country maps to regdmn code: 0x52
[   14.694277] ath: Country alpha2 being used: CN
[   14.694277] ath: Regpair used: 0x52
[   14.694278] ath: regdomain 0x809c dynamically updated by country IE
[   28.216364] Bluetooth: RFCOMM TTY layer initialized
[   28.216371] Bluetooth: RFCOMM socket layer initialized
[   28.216376] Bluetooth: RFCOMM ver 1.11
[   35.165465] systemd[1]: apt-daily.timer: Adding 57min 35.936577s random time.
[   37.607533] systemd[1]: apt-daily.timer: Adding 7min 42.417747s random time.