[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
[    0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-03,v3,hard,nointr,tcp ip=10.100.1.12::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt 
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bffa0000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 01/16/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 base 0080000000 mask FFC0000000 write-back
[    0.000000]   2 base 00F8000000 mask FFFC000000 write-combining
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000140000000 aka 5120M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xbffa0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f0c70-0x000f0c7f] mapped at [ffff8800000f0c70]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[    0.000000]  [mem 0x13fe00000-0x13fffffff] page 2M
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[    0.000000]  [mem 0x13c000000-0x13fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[    0.000000]  [mem 0x100000000-0x13bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbff9ffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xbfdfffff] page 2M
[    0.000000]  [mem 0xbfe00000-0xbff9ffff] page 4k
[    0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0E10 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000BFFB90E0 00006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000BFFBB8D0 000074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000BFFB9280 002648 (v02 ASUS   COREBOOT 00000001 INTL 20150619)
[    0.000000] ACPI: FACS 0x00000000BFFB9240 000040
[    0.000000] ACPI: SSDT 0x00000000BFFBB9D0 0006BD (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: TCPA 0x00000000BFFBC090 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x00000000BFFBC0D0 00008E (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000BFFBC160 0000E8 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000BFFBC250 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000BFFBC280 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000BFFBC2C0 0000E8 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000BFFBC3B0 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x11 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x12 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x13 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=2
[    0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
[    0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[    0.000000]   NODE_DATA [mem 0x13fff7000-0x13fffbfff]
[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x13fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xbff9ffff]
[    0.000000]   node   0: [mem 0x100000000-0x13fffffff]
[    0.000000] On node 0 totalpages: 1048382
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10695 pages used for memmap
[    0.000000]   DMA32 zone: 782240 pages, LIFO batch:31
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbffa0000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:2
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1034026
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-03,v3,hard,nointr,tcp ip=10.100.1.12::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt 
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xeb80000000-0xeb81ffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[    0.000000] Memory: 3983824K/4193528K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 209704K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:712 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3015.547 MHz processor
[    0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[    0.016000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6031.09 BogoMIPS (lpj=12062188)
[    0.020001] pid_max: default: 32768 minimum: 301
[    0.024011] ACPI: Core revision 20140424
[    0.029305] ACPI: All ACPI Tables successfully acquired
[    0.032231] Security Framework initialized
[    0.036013] AppArmor: AppArmor disabled by boot time parameter
[    0.040001] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.048123] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.057863] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.061246] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.064011] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.072355] Initializing cgroup subsys memory
[    0.076009] Initializing cgroup subsys devices
[    0.080010] Initializing cgroup subsys freezer
[    0.084003] Initializing cgroup subsys net_cls
[    0.088007] Initializing cgroup subsys blkio
[    0.092005] Initializing cgroup subsys perf_event
[    0.096002] Initializing cgroup subsys net_prio
[    0.100027] tseg: 0000000000
[    0.100034] CPU: Physical Processor ID: 0
[    0.104001] CPU: Processor Core ID: 0
[    0.108002] mce: CPU supports 5 MCE banks
[    0.112008] LVT offset 0 assigned for vector 0xf9
[    0.116004] process: using AMD E400 aware idle routine
[    0.120003] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
tlb_flushall_shift: 6
[    0.128078] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
[    0.136689] ftrace: allocating 21601 entries in 85 pages
[    0.148434] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.194546] smpboot: CPU0: Dual-Core AMD Opteron(tm) Processor 8222 (fam: 0f, model: 41, stepping: 03)
[    0.204000] Performance Events: AMD PMU driver.
[    0.204003] ... version:                0
[    0.208000] ... bit width:              48
[    0.212000] ... generic registers:      4
[    0.216000] ... value mask:             0000ffffffffffff
[    0.220000] ... max period:             00007fffffffffff
[    0.224000] ... fixed-purpose events:   0
[    0.228000] ... event mask:             000000000000000f
[    0.233562] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.236154] x86: Booting SMP configuration:
[    0.240001] .... node  #0, CPUs:      #1 #2 #3
[    0.512114] x86: Booted up 1 node, 4 CPUs
[    0.516001] smpboot: Total of 4 processors activated (24123.62 BogoMIPS)
[    0.524104] devtmpfs: initialized
[    0.533274] pinctrl core: initialized pinctrl subsystem
[    0.536094] NET: Registered protocol family 16
[    0.540134] cpuidle: using governor ladder
[    0.544002] cpuidle: using governor menu
[    0.548005] node 0 link 1: io port [1000, 5fff]
[    0.548007] TOM: 00000000c0000000 aka 3072M
[    0.552002] node 0 link 1: mmio [a0000, bffff]
[    0.552004] node 0 link 1: mmio [fc000000, fc5fffff]
[    0.552006] node 0 link 1: mmio [f8000000, fbffffff]
[    0.552007] TOM2: 0000000140000000 aka 5120M
[    0.556002] bus: [bus 00-08] on node 0 link 1
[    0.556003] bus: 00 [io  0x0000-0xffff]
[    0.556005] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.556006] bus: 00 [mem 0xc0000000-0xffffffff]
[    0.556007] bus: 00 [mem 0x140000000-0xfcffffffff]
[    0.556055] ACPI: bus type PCI registered
[    0.560002] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.564093] PCI: Using configuration type 1 for base access
[    0.584084] ACPI: Added _OSI(Module Device)
[    0.588002] ACPI: Added _OSI(Processor Device)
[    0.592001] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.596001] ACPI: Added _OSI(Processor Aggregator Device)
[    0.604923] ACPI: Interpreter enabled
[    0.608009] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.616001] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[    0.626188] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[    0.636004] ACPI: (supports S0 S1 S5)
[    0.639662] ACPI: Using IOAPIC for interrupt routing
[    0.640027] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.649280] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-08])
[    0.652006] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.656011] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.661572] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.664005] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.668114] PCI host bridge to bus 0000:00
[    0.672003] pci_bus 0000:00: root bus resource [bus 00-08]
[    0.676002] pci_bus 0000:00: root bus resource [io  0x0d00-0x5fff]
[    0.680001] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[    0.684001] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc5fffff]
[    0.688001] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.692001] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.696010] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.696125] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[    0.696131] pci 0000:00:01.0: reg 0x10: [io  0x4c00-0x4c7f]
[    0.696205] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.696211] pci 0000:00:01.1: reg 0x10: [io  0x5000-0x501f]
[    0.696220] pci 0000:00:01.1: reg 0x20: [io  0x4c80-0x4cbf]
[    0.696223] pci 0000:00:01.1: reg 0x24: [io  0x4cc0-0x4cff]
[    0.696235] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.696302] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.696308] pci 0000:00:02.0: reg 0x10: [mem 0xfc500000-0xfc500fff]
[    0.696327] pci 0000:00:02.0: supports D1 D2
[    0.696329] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.696361] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.700042] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.700048] pci 0000:00:02.1: reg 0x10: [mem 0xfc503000-0xfc5030ff]
[    0.700073] pci 0000:00:02.1: supports D1 D2
[    0.700075] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.700107] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.704045] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.704057] pci 0000:00:06.0: reg 0x20: [io  0x5020-0x502f]
[    0.704064] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.708001] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.712004] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.716001] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.720063] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.720069] pci 0000:00:07.0: reg 0x10: [io  0x5050-0x5057]
[    0.720073] pci 0000:00:07.0: reg 0x14: [io  0x5070-0x5073]
[    0.720076] pci 0000:00:07.0: reg 0x18: [io  0x5058-0x505f]
[    0.720079] pci 0000:00:07.0: reg 0x1c: [io  0x5074-0x5077]
[    0.720083] pci 0000:00:07.0: reg 0x20: [io  0x5030-0x503f]
[    0.720086] pci 0000:00:07.0: reg 0x24: [mem 0xfc501000-0xfc501fff]
[    0.720151] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.720156] pci 0000:00:08.0: reg 0x10: [io  0x5060-0x5067]
[    0.720160] pci 0000:00:08.0: reg 0x14: [io  0x5078-0x507b]
[    0.720163] pci 0000:00:08.0: reg 0x18: [io  0x5068-0x506f]
[    0.720167] pci 0000:00:08.0: reg 0x1c: [io  0x507c-0x507f]
[    0.720170] pci 0000:00:08.0: reg 0x20: [io  0x5040-0x504f]
[    0.720174] pci 0000:00:08.0: reg 0x24: [mem 0xfc502000-0xfc502fff]
[    0.720238] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[    0.720280] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.724041] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.724062] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.724093] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.728042] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.728062] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.728093] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.732041] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.732060] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.732091] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.736041] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.736060] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.736093] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.740047] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[    0.740114] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[    0.740176] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[    0.740237] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[    0.740301] pci 0000:00:19.0: [1022:1100] type 00 class 0x060000
[    0.740369] pci 0000:00:19.1: [1022:1101] type 00 class 0x060000
[    0.740429] pci 0000:00:19.2: [1022:1102] type 00 class 0x060000
[    0.740491] pci 0000:00:19.3: [1022:1103] type 00 class 0x060000
[    0.740590] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[    0.740599] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.740604] pci 0000:01:04.0: reg 0x14: [mem 0xfc200000-0xfc23ffff]
[    0.740610] pci 0000:01:04.0: reg 0x18: [io  0x3000-0x307f]
[    0.740640] pci 0000:01:04.0: supports D1 D2
[    0.740691] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.744002] pci 0000:00:09.0:   bridge window [io  0x3000-0x3fff]
[    0.744005] pci 0000:00:09.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    0.744007] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    0.744057] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[    0.744069] pci 0000:02:00.0: reg 0x10: [mem 0xfc300000-0xfc30ffff 64bit]
[    0.744092] pci 0000:02:00.0: reg 0x30: [mem 0x0d080000-0x0d08ffff pref]
[    0.744132] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.744184] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.748007] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.752003] pci 0000:00:0b.0:   bridge window [mem 0xfc300000-0xfc3fffff]
[    0.752053] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[    0.752065] pci 0000:03:00.0: reg 0x10: [mem 0xfc400000-0xfc40ffff 64bit]
[    0.752126] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.752177] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.756005] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.760003] pci 0000:00:0c.0:   bridge window [mem 0xfc400000-0xfc4fffff]
[    0.760041] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.764046] pci 0000:05:00.0: [111d:8018] type 01 class 0x060400
[    0.764086] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[    0.764133] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.768004] pci 0000:00:0e.0: PCI bridge to [bus 05-08]
[    0.772002] pci 0000:00:0e.0:   bridge window [io  0x1000-0x2fff]
[    0.772004] pci 0000:00:0e.0:   bridge window [mem 0xfc000000-0xfc1fffff]
[    0.772049] pci 0000:06:00.0: [111d:8018] type 01 class 0x060400
[    0.772097] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[    0.772144] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.776008] pci 0000:06:01.0: [111d:8018] type 01 class 0x060400
[    0.780001] pci 0000:06:01.0: PME# supported from D0 D3hot D3cold
[    0.780048] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.784020] pci 0000:05:00.0: PCI bridge to [bus 06-08]
[    0.788005] pci 0000:05:00.0:   bridge window [io  0x1000-0x2fff]
[    0.788009] pci 0000:05:00.0:   bridge window [mem 0xfc000000-0xfc1fffff]
[    0.788069] pci 0000:07:00.0: [8086:10bc] type 00 class 0x020000
[    0.788081] pci 0000:07:00.0: reg 0x10: [mem 0xfc000000-0xfc01ffff]
[    0.788091] pci 0000:07:00.0: reg 0x14: [mem 0xfc020000-0xfc03ffff]
[    0.788100] pci 0000:07:00.0: reg 0x18: [io  0x1000-0x101f]
[    0.788131] pci 0000:07:00.0: reg 0x30: [mem 0xfc040000-0xfc05ffff pref]
[    0.788173] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[    0.788234] pci 0000:07:00.1: [8086:10bc] type 00 class 0x020000
[    0.788246] pci 0000:07:00.1: reg 0x10: [mem 0xfc060000-0xfc07ffff]
[    0.788255] pci 0000:07:00.1: reg 0x14: [mem 0xfc080000-0xfc09ffff]
[    0.788264] pci 0000:07:00.1: reg 0x18: [io  0x1020-0x103f]
[    0.788296] pci 0000:07:00.1: reg 0x30: [mem 0xfc0a0000-0xfc0bffff pref]
[    0.788337] pci 0000:07:00.1: PME# supported from D0 D3hot D3cold
[    0.788391] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.792009] pci 0000:06:00.0: PCI bridge to [bus 07]
[    0.796005] pci 0000:06:00.0:   bridge window [io  0x1000-0x1fff]
[    0.796009] pci 0000:06:00.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.796071] pci 0000:08:00.0: [8086:10bc] type 00 class 0x020000
[    0.796083] pci 0000:08:00.0: reg 0x10: [mem 0xfc100000-0xfc11ffff]
[    0.796092] pci 0000:08:00.0: reg 0x14: [mem 0xfc120000-0xfc13ffff]
[    0.796102] pci 0000:08:00.0: reg 0x18: [io  0x2000-0x201f]
[    0.796133] pci 0000:08:00.0: reg 0x30: [mem 0xfc140000-0xfc15ffff pref]
[    0.796175] pci 0000:08:00.0: PME# supported from D0 D3hot
[    0.796236] pci 0000:08:00.1: [8086:10bc] type 00 class 0x020000
[    0.796248] pci 0000:08:00.1: reg 0x10: [mem 0xfc160000-0xfc17ffff]
[    0.796258] pci 0000:08:00.1: reg 0x14: [mem 0xfc180000-0xfc19ffff]
[    0.796267] pci 0000:08:00.1: reg 0x18: [io  0x2020-0x203f]
[    0.796298] pci 0000:08:00.1: reg 0x30: [mem 0xfc1a0000-0xfc1bffff pref]
[    0.796340] pci 0000:08:00.1: PME# supported from D0 D3hot
[    0.796395] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.800009] pci 0000:06:01.0: PCI bridge to [bus 08]
[    0.804005] pci 0000:06:01.0:   bridge window [io  0x2000-0x2fff]
[    0.804009] pci 0000:06:01.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.804044] pci_bus 0000:00: on NUMA node 0
[    0.804101] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    0.812051] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    0.817547] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.825217] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.832246] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    0.838710] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[    0.842710] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    0.848988] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[    0.853547] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[    0.862432] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    0.869599] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    0.876243] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[    0.881541] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[    0.888909] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[    0.896245] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[    0.902710] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[    0.906710] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.915177] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[    0.921598] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[    0.928017] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[    0.933876] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[    0.940401] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.944091] vgaarb: setting as boot device: PCI:0000:01:04.0
[    0.948000] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[    0.956008] vgaarb: loaded
[    0.960001] vgaarb: bridge control possible 0000:01:04.0
[    0.964118] PCI: Using ACPI for IRQ routing
[    0.972004] PCI: pci_cache_line_size set to 64 bytes
[    0.972064] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.972067] e820: reserve RAM buffer [mem 0xbffa0000-0xbfffffff]
[    0.972257] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.976005] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    0.984191] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.992042] Switched to clocksource hpet
[    1.004759] pnp: PnP ACPI init
[    1.007847] ACPI: bus type PNP registered
[    1.012252] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.012303] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.012357] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.012410] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.012438] pnp 00:04: [dma 2]
[    1.012462] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.012477] pnp: PnP ACPI: found 5 devices
[    1.016576] ACPI: bus type PNP unregistered
[    1.027985] pci 0000:02:00.0: can't claim BAR 6 [mem 0x0d080000-0x0d08ffff pref]: no compatible bridge window
[    1.037947] pci 0000:00:09.0: PCI bridge to [bus 01]
[    1.042907] pci 0000:00:09.0:   bridge window [io  0x3000-0x3fff]
[    1.048999] pci 0000:00:09.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    1.055784] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    1.063009] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc310000-0xfc31ffff pref]
[    1.070226] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.075189] pci 0000:00:0b.0:   bridge window [mem 0xfc300000-0xfc3fffff]
[    1.081975] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    1.086940] pci 0000:00:0c.0:   bridge window [mem 0xfc400000-0xfc4fffff]
[    1.093727] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    1.098697] pci 0000:06:00.0: PCI bridge to [bus 07]
[    1.103659] pci 0000:06:00.0:   bridge window [io  0x1000-0x1fff]
[    1.109754] pci 0000:06:00.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    1.116544] pci 0000:06:01.0: PCI bridge to [bus 08]
[    1.121503] pci 0000:06:01.0:   bridge window [io  0x2000-0x2fff]
[    1.127599] pci 0000:06:01.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    1.134388] pci 0000:05:00.0: PCI bridge to [bus 06-08]
[    1.139608] pci 0000:05:00.0:   bridge window [io  0x1000-0x2fff]
[    1.145704] pci 0000:05:00.0:   bridge window [mem 0xfc000000-0xfc1fffff]
[    1.152493] pci 0000:00:0e.0: PCI bridge to [bus 05-08]
[    1.157713] pci 0000:00:0e.0:   bridge window [io  0x1000-0x2fff]
[    1.163806] pci 0000:00:0e.0:   bridge window [mem 0xfc000000-0xfc1fffff]
[    1.170594] pci_bus 0000:00: resource 4 [io  0x0d00-0x5fff]
[    1.170596] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
[    1.170598] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc5fffff]
[    1.170599] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[    1.170601] pci_bus 0000:00: resource 8 [io  0x0000-0x0cf7]
[    1.170604] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    1.170606] pci_bus 0000:01: resource 1 [mem 0xfc200000-0xfc2fffff]
[    1.170608] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[    1.170610] pci_bus 0000:02: resource 1 [mem 0xfc300000-0xfc3fffff]
[    1.170612] pci_bus 0000:03: resource 1 [mem 0xfc400000-0xfc4fffff]
[    1.170615] pci_bus 0000:05: resource 0 [io  0x1000-0x2fff]
[    1.170617] pci_bus 0000:05: resource 1 [mem 0xfc000000-0xfc1fffff]
[    1.170619] pci_bus 0000:06: resource 0 [io  0x1000-0x2fff]
[    1.170621] pci_bus 0000:06: resource 1 [mem 0xfc000000-0xfc1fffff]
[    1.170623] pci_bus 0000:07: resource 0 [io  0x1000-0x1fff]
[    1.170625] pci_bus 0000:07: resource 1 [mem 0xfc000000-0xfc0fffff]
[    1.170627] pci_bus 0000:08: resource 0 [io  0x2000-0x2fff]
[    1.170629] pci_bus 0000:08: resource 1 [mem 0xfc100000-0xfc1fffff]
[    1.170702] NET: Registered protocol family 2
[    1.175376] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    1.182799] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    1.189714] TCP: Hash tables configured (established 32768 bind 32768)
[    1.196324] TCP: reno registered
[    1.199560] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.205613] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.212221] NET: Registered protocol family 1
[    1.216864] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    1.222840] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.228680] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.234187] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.239675] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    1.245250] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.250758] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.256246] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    1.261820] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.267333] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.272816] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    1.278391] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.283905] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.289387] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    1.294962] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.300462] pci 0000:01:04.0: Video device with shadowed ROM
[    1.300487] PCI: CLS 64 bytes, default 64
[    1.300567] Unpacking initramfs...
[    1.467868] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
[    1.475517] PCI-DMA: Disabling AGP.
[    1.479155] PCI-DMA: aperture base @ b4000000 size 65536 KB
[    1.484725] PCI-DMA: using GART IOMMU.
[    1.488479] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.498662] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.506470] microcode: AMD CPU family 0xf not supported
[    1.512086] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    1.518325] audit: initializing netlink subsys (disabled)
[    1.523762] audit: type=2000 audit(1452946087.520:1): initialized
[    1.530287] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.536664] zbud: loaded
[    1.539397] VFS: Disk quotas dquot_6.5.2
[    1.543342] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.549850] msgmni has been set to 7926
[    1.554118] alg: No test for stdrng (krng)
[    1.558264] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.565728] io scheduler noop registered
[    1.569652] io scheduler deadline registered
[    1.573968] io scheduler cfq registered (default)
[    1.578971] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.584558] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.591254] GHES: HEST is not enabled!
[    1.595089] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.621622] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.649230] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.656953] Linux agpgart interface v0.103
[    1.661162] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[    1.671421] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.676395] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.681673] mousedev: PS/2 mouse device common for all mice
[    1.687334] rtc_cmos rtc_cmos: RTC can wake from S4
[    1.692366] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    1.698739] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    1.706580] ledtrig-cpu: registered to indicate activity on CPUs
[    1.712672] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    1.719108] AMD IOMMUv2 functionality not available on this system
[    1.725392] TCP: cubic registered
[    1.728780] NET: Registered protocol family 10
[    1.733524] mip6: Mobile IPv6
[    1.736496] NET: Registered protocol family 17
[    1.740941] mpls_gso: MPLS GSO support
[    1.745101] registered taskstats version 1
[    1.749795] rtc_cmos rtc_cmos: setting system clock to 2016-01-16 12:08:09 UTC (1452946089)
[    1.758203] PM: Hibernation image not present or could not be loaded.
[    1.759474] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
[    1.767332] Write protecting the kernel read-only data: 8192k
[    1.775485] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
[    1.783769] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    1.800249] systemd-udevd[72]: starting version 215
[    1.805523] random: systemd-udevd urandom read with 3 bits of entropy available
[    1.822246] pps_core: LinuxPPS API ver. 1 registered
[    1.827218] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.836918] PTP clock support registered
[    1.841117] ACPI: bus type USB registered
[    1.846989] tg3.c:v3.137 (May 11, 2014)
[    1.850914] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[    1.851099] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.851101] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[    1.851272] usbcore: registered new interface driver usbfs
[    1.851285] usbcore: registered new interface driver hub
[    1.851370] ACPI: PCI Interrupt Link [LNND] enabled at IRQ 19
[    1.851499] e1000e 0000:07:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.851596] usbcore: registered new device driver usb
[    1.851781] e1000e 0000:07:00.0: irq 40 for MSI/MSI-X
[    1.899364] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[    1.905204] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.911905] ehci-pci: EHCI PCI platform driver
[    1.916463] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.916501] ehci-pci 0000:00:02.1: EHCI Host Controller
[    1.916508] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    1.916518] ehci-pci 0000:00:02.1: debug port 1
[    1.916554] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    1.916575] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc503000
[    1.928029] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    1.928091] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.928093] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.928094] usb usb1: Product: EHCI Host Controller
[    1.928095] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    1.928096] usb usb1: SerialNumber: 0000:00:02.1
[    1.928364] hub 1-0:1.0: USB hub found
[    1.928371] hub 1-0:1.0: 10 ports detected
[    1.988876] ohci-pci: OHCI PCI platform driver
[    1.993382] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    1.998955] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.006376] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc500000
[    2.010268] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:23:54:37:d4:d3
[    2.010270] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.010271] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.010272] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.010339] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[    2.010431] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[    2.025022] e1000e 0000:07:00.0 eth1: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:c9
[    2.025024] e1000e 0000:07:00.0 eth1: Intel(R) PRO/1000 Network Connection
[    2.025103] e1000e 0000:07:00.0 eth1: MAC: 0, PHY: 4, PBA No: D72468-003
[    2.025281] ACPI: PCI Interrupt Link [LNIC] enabled at IRQ 18
[    2.025394] e1000e 0000:07:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    2.025419] e1000e 0000:07:00.1: irq 41 for MSI/MSI-X
[    2.119016] tg3 0000:03:00.0 eth2: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:23:54:37:d5:e9
[    2.129267] tg3 0000:03:00.0 eth2: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.138997] tg3 0000:03:00.0 eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.146822] tg3 0000:03:00.0 eth2: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.155615] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.162397] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.169614] usb usb2: Product: OHCI PCI host controller
[    2.174832] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.180925] usb usb2: SerialNumber: 0000:00:02.0
[    2.185722] hub 2-0:1.0: USB hub found
[    2.189482] hub 2-0:1.0: 10 ports detected
[    2.200796] e1000e 0000:07:00.1 eth3: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:c8
[    2.208715] e1000e 0000:07:00.1 eth3: Intel(R) PRO/1000 Network Connection
[    2.215663] e1000e 0000:07:00.1 eth3: MAC: 0, PHY: 4, PBA No: D72468-003
[    2.222496] e1000e 0000:08:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    2.231813] e1000e 0000:08:00.0: irq 42 for MSI/MSI-X
[    2.404736] e1000e 0000:08:00.0 eth4: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:cb
[    2.412648] e1000e 0000:08:00.0 eth4: Intel(R) PRO/1000 Network Connection
[    2.419597] e1000e 0000:08:00.0 eth4: MAC: 0, PHY: 4, PBA No: D72468-003
[    2.426385] e1000e 0000:08:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    2.435696] e1000e 0000:08:00.1: irq 43 for MSI/MSI-X
[    2.608723] e1000e 0000:08:00.1 eth5: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:ca
[    2.616636] e1000e 0000:08:00.1 eth5: Intel(R) PRO/1000 Network Connection
[    2.623583] e1000e 0000:08:00.1 eth5: MAC: 0, PHY: 4, PBA No: D72468-003
[    2.634030] FS-Cache: Loaded
[    2.639961] RPC: Registered named UNIX socket transport module.
[    2.646416] RPC: Registered udp transport module.
[    2.652500] RPC: Registered tcp transport module.
[    2.658580] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.669240] FS-Cache: Netfs 'nfs' registered for caching
[    2.680435] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[    2.728089] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.416318] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
[    4.419547] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[    4.419547] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    5.167707] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    5.181205] systemd[1]: Detected architecture 'x86-64'.
[    5.400562] systemd[1]: Inserted module 'autofs4'
[    5.406046] systemd[1]: Set hostname to <cb-test-tgt>.
[    5.477384] random: nonblocking pool is initialized
[    5.617475] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[    5.630222] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    5.645476] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    5.653205] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.660778] systemd[1]: Expecting device dev-ttyS0.device...
[    5.676127] systemd[1]: Starting Remote File Systems (Pre).
[    5.692074] systemd[1]: Reached target Remote File Systems (Pre).
[    5.698202] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    5.720044] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.729452] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    5.737484] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.745406] systemd[1]: Starting Paths.
[    5.760058] systemd[1]: Reached target Paths.
[    5.764455] systemd[1]: Starting Encrypted Volumes.
[    5.780055] systemd[1]: Reached target Encrypted Volumes.
[    5.785469] systemd[1]: Starting Swap.
[    5.800044] systemd[1]: Reached target Swap.
[    5.804322] systemd[1]: Starting Root Slice.
[    5.816045] systemd[1]: Created slice Root Slice.
[    5.820764] systemd[1]: Starting User and Session Slice.
[    5.836054] systemd[1]: Created slice User and Session Slice.
[    5.841815] systemd[1]: Starting Delayed Shutdown Socket.
[    5.856055] systemd[1]: Listening on Delayed Shutdown Socket.
[    5.861815] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    5.880056] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.887030] systemd[1]: Starting Journal Socket (/dev/log).
[    5.904055] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.909998] systemd[1]: Starting udev Kernel Socket.
[    5.924042] systemd[1]: Listening on udev Kernel Socket.
[    5.929372] systemd[1]: Starting udev Control Socket.
[    5.944042] systemd[1]: Listening on udev Control Socket.
[    5.949453] systemd[1]: Starting Journal Socket.
[    5.964042] systemd[1]: Listening on Journal Socket.
[    5.969030] systemd[1]: Starting System Slice.
[    5.984045] systemd[1]: Created slice System Slice.
[    5.988933] systemd[1]: Starting system-getty.slice.
[    6.004055] systemd[1]: Created slice system-getty.slice.
[    6.009470] systemd[1]: Starting system-serial\x2dgetty.slice.
[    6.024055] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    6.030354] systemd[1]: Starting Increase datagram queue length...
[    6.048667] systemd[1]: Mounting Huge Pages File System...
[    6.064658] systemd[1]: Starting udev Coldplug all Devices...
[    6.311681] systemd[1]: Starting Load Kernel Modules...
[    6.324669] systemd[1]: Mounting POSIX Message Queue File System...
[    6.342942] systemd[1]: Started Set Up Additional Binary Formats.
[    6.349191] systemd[1]: Mounting Debug File System...
[    6.365056] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.388523] systemd[1]: Starting Slices.
[    6.400053] systemd[1]: Reached target Slices.
[    6.404527] systemd[1]: Starting Remount Root and Kernel File Systems...
[    6.432098] systemd[1]: Mounted Debug File System.
[    6.448056] systemd[1]: Mounted POSIX Message Queue File System.
[    6.464106] systemd[1]: Mounted Huge Pages File System.
[    6.480063] systemd[1]: Started Increase datagram queue length.
[    6.496078] systemd[1]: Started Load Kernel Modules.
[    6.516078] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    6.536106] systemd[1]: Started Remount Root and Kernel File Systems.
[    6.552065] systemd[1]: Started udev Coldplug all Devices.
[    6.583051] systemd[1]: Started Various fixups to make systemd work better on Debian.
[    6.590916] systemd[1]: Starting Load/Save Random Seed...
[    6.604950] systemd[1]: Starting Create Static Device Nodes in /dev...
[    6.620945] systemd[1]: Mounted Configuration File System.
[    6.626501] systemd[1]: Starting Apply Kernel Variables...
[    6.640776] systemd[1]: Mounted FUSE Control File System.
[    6.646254] systemd[1]: Starting Syslog Socket.
[    6.660065] systemd[1]: Listening on Syslog Socket.
[    6.665003] systemd[1]: Starting Sockets.
[    6.676045] systemd[1]: Reached target Sockets.
[    6.680600] systemd[1]: Starting Journal Service...
[    6.704085] systemd[1]: Started Journal Service.
[    6.895756] systemd-udevd[152]: starting version 215
[    7.090004] systemd-journald[150]: Received request to flush runtime journal from PID 1
[    7.545948] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.553760] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    7.562118] ACPI: Power Button [PWRB]
[    7.565835] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    7.573630] ACPI: Power Button [PWRF]
[    7.595902] FDC 0 is a post-1991 82077
[    7.656187] systemd-udevd[183]: renamed network interface eth1 to eth6
[    7.664531] SCSI subsystem initialized
[    7.668828] i2c i2c-0: nForce2 SMBus adapter at 0x4c80
[    7.674116] i2c i2c-1: nForce2 SMBus adapter at 0x4cc0
[    7.680573] EDAC MC: Ver: 3.0.0
[    7.680645] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[    7.680704] k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141
[    7.714575] libata version 3.00 loaded.
[    7.715424] MCE: In-kernel MCE decoding enabled.
[    7.725085] sata_nv 0000:00:07.0: version 3.5
[    7.725308] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[    7.731818] scsi0 : sata_nv
[    7.734728] AMD64 EDAC driver v3.4.0
[    7.739368] scsi1 : sata_nv
[    7.742231] ata1: SATA max UDMA/133 cmd 0x5050 ctl 0x5070 bmdma 0x5030 irq 21
[    7.749373] ata2: SATA max UDMA/133 cmd 0x5058 ctl 0x5074 bmdma 0x5038 irq 21
[    7.756772] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[    7.762973] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    7.763036] scsi2 : sata_nv
[    7.763144] scsi3 : sata_nv
[    7.763186] ata3: SATA max UDMA/133 cmd 0x5060 ctl 0x5078 bmdma 0x5040 irq 20
[    7.763187] ata4: SATA max UDMA/133 cmd 0x5068 ctl 0x507c bmdma 0x5048 irq 20
[    7.763215] pata_amd 0000:00:06.0: version 0.4.1
[    7.763603] scsi4 : pata_amd
[    7.763707] scsi5 : pata_amd
[    7.763749] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5020 irq 14
[    7.763750] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x5028 irq 15
[    7.763790] EDAC amd64: DRAM ECC enabled.
[    7.763796] EDAC amd64: K8 revF or later detected (node 0).
[    7.763806] EDAC MC: DCT0 chip selects:
[    7.763806] EDAC amd64: MC: 0:     0MB 1:     0MB
[    7.763807] EDAC amd64: MC: 2:     0MB 3:     0MB
[    7.763808] EDAC amd64: MC: 4:  1024MB 5:  1024MB
[    7.763808] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[    7.763832] EDAC amd64: CS4: Registered DDR2 RAM
[    7.763832] EDAC amd64: CS5: Registered DDR2 RAM
[    7.763833] EDAC amd64: CS6: Registered DDR2 RAM
[    7.763833] EDAC amd64: CS7: Registered DDR2 RAM
[    7.764018] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)
[    7.764026] EDAC amd64: DRAM ECC disabled.
[    7.869343] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
[    7.894407] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[    7.958439] kvm: Nested Virtualization enabled
[    7.969021] powernow_k8: fid 0x16 (3000 MHz), vid 0xa
[    7.974098] powernow_k8: fid 0x14 (2800 MHz), vid 0xc
[    7.979196] powernow_k8: fid 0x12 (2600 MHz), vid 0xe
[    7.984252] powernow_k8: fid 0x10 (2400 MHz), vid 0x10
[    7.989401] powernow_k8: fid 0xe (2200 MHz), vid 0x12
[    7.994452] powernow_k8: fid 0xc (2000 MHz), vid 0x12
[    7.999512] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
[    8.004666] powernow_k8: fid 0x16 (3000 MHz), vid 0xa
[    8.009726] powernow_k8: fid 0x14 (2800 MHz), vid 0xc
[    8.014789] powernow_k8: fid 0x12 (2600 MHz), vid 0xe
[    8.019845] powernow_k8: fid 0x10 (2400 MHz), vid 0x10
[    8.024992] powernow_k8: fid 0xe (2200 MHz), vid 0x12
[    8.030042] powernow_k8: fid 0xc (2000 MHz), vid 0x12
[    8.035120] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
[    8.041599] powernow_k8: Found 1 Dual-Core AMD Opteron(tm) Processor 8222 (4 cpu cores) (version 2.20.00)
[    8.072024] ata1: SATA link down (SStatus 0 SControl 300)
[    8.084036] ata3: SATA link down (SStatus 0 SControl 300)
[    8.388084] ata2: SATA link down (SStatus 0 SControl 300)
[    8.704042] ata4: SATA link down (SStatus 0 SControl 300)
[    8.944051] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   39.276789] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****