[    0.000000] Linux version 5.16.0-rc4-00117-gdcb05836d4a2 (root@45e877da5b3e) (gcc (Debian 11.2.0-12) 11.2.0, GNU ld (GNU Binutils for Debian) 2.37) #233 SMP PREEMPT Wed Dec 8 14:42:25 UTC 2021
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.16.0-rc4-00117-gdcb05836d4a2 root=/dev/sda3 rw quiet noisapnp cryptomgr.notests ipv6.disable_ipv6=1 selinux=0
[    0.000000] random: get_random_u32 called from bsp_init_amd+0x142/0x210 with crng_init=0
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1776
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005fe45fff] usable
[    0.000000] BIOS-e820: [mem 0x000000005fe46000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.0 present.
[    0.000000] DMI: ASUS F2A85-M_PRO/F2A85-M_PRO, BIOS 4.15-444-g7e43e27052 12/09/2021
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Initial usec timer 6083696
[    0.000000] tsc: Detected 3900.029 MHz processor
[    0.000592] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000596] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000599] last_pfn = 0x17f000 max_arch_pfn = 0x400000000
[    0.000732] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000935] last_pfn = 0x5fe46 max_arch_pfn = 0x400000000
[    0.004746] Using GB pages for direct mapping
[    0.004928] ACPI: Early table checksum verification disabled
[    0.004932] ACPI: RSDP 0x00000000000F6850 000024 (v02 COREv4)
[    0.004936] ACPI: XSDT 0x000000005FE4C0E0 000074 (v01 COREv4 COREBOOT 00000000 CORE 20200925)
[    0.004942] ACPI: FACP 0x000000005FE4DBC0 000114 (v06 COREv4 COREBOOT 00000000 CORE 20200925)
[    0.004948] ACPI: DSDT 0x000000005FE4C280 00193A (v02 COREv4 COREBOOT 00010001 INTL 20200925)
[    0.004952] ACPI: FACS 0x000000005FE4C240 000040
[    0.004954] ACPI: FACS 0x000000005FE4C240 000040
[    0.004957] ACPI: SSDT 0x000000005FE4DCE0 00008A (v02 COREv4 COREBOOT 0000002A CORE 20200925)
[    0.004960] ACPI: MCFG 0x000000005FE4DD70 00003C (v01 COREv4 COREBOOT 00000000 CORE 20200925)
[    0.004962] ACPI: APIC 0x000000005FE4DDB0 000062 (v03 COREv4 COREBOOT 00000000 CORE 20200925)
[    0.004965] ACPI: HPET 0x000000005FE4DE20 000038 (v01 COREv4 COREBOOT 00000000 CORE 20200925)
[    0.004968] ACPI: HEST 0x000000005FE4DE60 0001D0 (v01 COREv4 COREBOOT 00000000 CORE 20200925)
[    0.004971] ACPI: IVRS 0x000000005FE4E030 000070 (v02 AMD    AMDIOMMU 00000001 AMD  00000000)
[    0.004974] ACPI: SSDT 0x000000005FE4E0A0 00051F (v02 AMD    ALIB     00000001 MSFT 04000000)
[    0.004977] ACPI: SSDT 0x000000005FE4E5C0 0006B2 (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.004980] ACPI: VFCT 0x000000005FE4EC80 00F269 (v01 COREv4 COREBOOT 00000000 CORE 20200925)
[    0.004983] ACPI: Reserving FACP table memory at [mem 0x5fe4dbc0-0x5fe4dcd3]
[    0.004984] ACPI: Reserving DSDT table memory at [mem 0x5fe4c280-0x5fe4dbb9]
[    0.004985] ACPI: Reserving FACS table memory at [mem 0x5fe4c240-0x5fe4c27f]
[    0.004986] ACPI: Reserving FACS table memory at [mem 0x5fe4c240-0x5fe4c27f]
[    0.004987] ACPI: Reserving SSDT table memory at [mem 0x5fe4dce0-0x5fe4dd69]
[    0.004988] ACPI: Reserving MCFG table memory at [mem 0x5fe4dd70-0x5fe4ddab]
[    0.004989] ACPI: Reserving APIC table memory at [mem 0x5fe4ddb0-0x5fe4de11]
[    0.004990] ACPI: Reserving HPET table memory at [mem 0x5fe4de20-0x5fe4de57]
[    0.004991] ACPI: Reserving HEST table memory at [mem 0x5fe4de60-0x5fe4e02f]
[    0.004992] ACPI: Reserving IVRS table memory at [mem 0x5fe4e030-0x5fe4e09f]
[    0.004993] ACPI: Reserving SSDT table memory at [mem 0x5fe4e0a0-0x5fe4e5be]
[    0.004994] ACPI: Reserving SSDT table memory at [mem 0x5fe4e5c0-0x5fe4ec71]
[    0.004995] ACPI: Reserving VFCT table memory at [mem 0x5fe4ec80-0x5fe5dee8]
[    0.005051] No NUMA configuration found
[    0.005052] Faking a node at [mem 0x0000000000000000-0x000000017effffff]
[    0.005057] NODE_DATA(0) allocated [mem 0x17efe9000-0x17effffff]
[    0.017158] Zone ranges:
[    0.017159]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.017162]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.017163]   Normal   [mem 0x0000000100000000-0x000000017effffff]
[    0.017165]   Device   empty
[    0.017166] Movable zone start for each node
[    0.017167] Early memory node ranges
[    0.017168]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.017169]   node   0: [mem 0x0000000000100000-0x000000005fe45fff]
[    0.017171]   node   0: [mem 0x0000000100000000-0x000000017effffff]
[    0.017173] Initmem setup node 0 [mem 0x0000000000001000-0x000000017effffff]
[    0.017179] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.017235] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.029765] On node 0, zone Normal: 442 pages in unavailable ranges
[    0.029831] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.029954] ACPI: PM-Timer IO Port: 0x818
[    0.029961] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.029969] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.029972] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.029974] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.029978] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.029979] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.029984] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.029985] smpboot: smpboot: XXX end of prefill_possible_map
[    0.029986] After prefill_possible_map
[    0.029987] After init_cpu_to_node
[    0.029987] After init_gi_nodes
[    0.029989] After io_apic_init_mappings
[    0.029990] After x86_init.hyper.guest_late_init
[    0.030000] [mem 0x80000000-0xf7ffffff] available for PCI devices
[    0.030001] After e820
[    0.030003] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.034017] After unwind_init
[    0.034018] After setup_arch
[    0.034029] After setup_command_line
[    0.034030] After setup_nr_cpu_ids
[    0.034031] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[    0.034487] percpu: Embedded 54 pages/cpu s182040 r8192 d30952 u1048576
[    0.034503] pcpu-alloc: s182040 r8192 d30952 u1048576 alloc=1*2097152
[    0.034506] pcpu-alloc: [0] 0 1 
[    0.034532] After setup_per_cpu_areas
[    0.034534] After smp_perpare_boot_cpu
[    0.034535] After boot_cpu_hotplug_init
[    0.034538] Fallback order for Node 0: 0 
[    0.034541] Built 1 zonelists, mobility grouping on.  Total pages: 898444
[    0.034542] Policy zone: Normal
[    0.034544] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.16.0-rc4-00117-gdcb05836d4a2 root=/dev/sda3 rw quiet noisapnp cryptomgr.notests ipv6.disable_ipv6=1 selinux=0
[    0.034627] Unknown kernel command line parameters "noisapnp BOOT_IMAGE=/boot/vmlinuz-5.16.0-rc4-00117-gdcb05836d4a2", will be passed to user space.
[    0.035411] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.035805] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.035835] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.076197] Memory: 3483300K/3651472K available (14344K kernel code, 2321K rwdata, 4212K rodata, 1688K init, 6340K bss, 167912K reserved, 0K cma-reserved)
[    0.076636] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.076671] After mm_init
[    0.076672] ftrace: allocating 35324 entries in 138 pages
[    0.088945] ftrace: allocated 138 pages with 3 groups
[    0.089060] Dynamic Preempt: full
[    0.089061] After sched_init
[    0.089133] rcu: Preemptible hierarchical RCU implementation.
[    0.089134] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
[    0.089136] 	Trampoline variant of Tasks RCU enabled.
[    0.089137] 	Rude variant of Tasks RCU enabled.
[    0.089137] 	Tracing variant of Tasks RCU enabled.
[    0.089138] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.089139] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.089151] After rcu_init
[    0.097979] NR_IRQS: 4352, nr_irqs: 440, preallocated irqs: 16
[    0.098329] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.098366] random: crng_init_try_arch_early failed with i = 4, X86_FEATURE_RDRAND = no
[    0.098369] random: crng_init_try_arch_early failed with i = 5, X86_FEATURE_RDRAND = no
[    0.098370] random: crng_init_try_arch_early failed with i = 6, X86_FEATURE_RDRAND = no
[    0.098371] random: crng_init_try_arch_early failed with i = 7, X86_FEATURE_RDRAND = no
[    0.098372] random: crng_init_try_arch_early failed with i = 8, X86_FEATURE_RDRAND = no
[    0.098372] random: crng_init_try_arch_early failed with i = 9, X86_FEATURE_RDRAND = no
[    0.098373] random: crng_init_try_arch_early failed with i = 10, X86_FEATURE_RDRAND = no
[    0.098374] random: crng_init_try_arch_early failed with i = 11, X86_FEATURE_RDRAND = no
[    0.098375] random: crng_init_try_arch_early failed with i = 12, X86_FEATURE_RDRAND = no
[    0.098376] random: crng_init_try_arch_early failed with i = 13, X86_FEATURE_RDRAND = no
[    0.098377] random: crng_init_try_arch_early failed with i = 14, X86_FEATURE_RDRAND = no
[    0.098378] random: crng_init_try_arch_early failed with i = 15, X86_FEATURE_RDRAND = no
[    0.098378] After add_latent_entropy
[    0.098381] After add_device_randomness
[    0.098382] After boot_init_stack_canary
[    0.098439] spurious 8259A interrupt: IRQ7.
[    0.100440] Console: colour VGA+ 80x25
[    0.100451] printk: console [tty0] enabled
[    0.100492] ACPI: Core revision 20210930
[    0.100713] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.100730] APIC: Switch to symmetric I/O mode setup
[    0.135815] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.140731] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x706eee329b8, max_idle_ns: 881591225733 ns
[    0.140740] Calibrating delay loop (skipped), value calculated using timer frequency.. 7800.05 BogoMIPS (lpj=3900029)
[    0.140744] pid_max: default: 32768 minimum: 301
[    0.140854] LSM: Security Framework initializing
[    0.140971] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.140988] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.141589] Bit 30 in CPUID ECX not set.
[    0.141616] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.141618] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.141623] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.141625] Spectre V2 : Mitigation: Full AMD retpoline
[    0.141626] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.141628] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.141630] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.145056] Freeing SMP alternatives memory: 40K
[    0.145060] After check_bugs
[    0.145061] After acpi_subsystem_init
[    0.145062] After arch_post_acpi_subsys_init
[    0.145063] After rcu_scheduler_starting
[    0.145139] After find_task_by_pid_ns and PF_NO_SETAFFINITY
[    0.145146] After numa_default_policy
[    0.145170] After rcu_read_lock
[    0.145171] After rcu_read_unlock
[    0.145172] After kthreadd_done
[    0.145183] smpboot: Start of smp_prepare_cpus_common
[    0.145185] smpboot: smpboot: zalloc 0
[    0.145186] smpboot: smpboot: zalloc 1
[    0.145187] smpboot: smpboot: After set_sched_topology()
[    0.145189] smpboot: smpboot: After smp_sanity_check()
[    0.145189] smpboot: smpboot: Before x86_init.timers.setup_percpu_clockev()
[    0.197736] random: random: 1
[    0.197736] random: random: 2
[    0.197737] random: random: 3
[    0.197737] random: random: 4
[    0.247196] smpboot: smpboot: After x86_init.timers.setup_percpu_clockev()
[    0.247196] smpboot: smp_get_logical_apicid()
[    0.247197] smpboot: CPU0: AMD A6-6400K APU with Radeon(tm) HD Graphics (family: 0x15, model: 0x13, stepping: 0x1)
[    0.247527] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.247532] ... version:                0
[    0.247533] ... bit width:              48
[    0.247533] ... generic registers:      6
[    0.247534] ... value mask:             0000ffffffffffff
[    0.247535] ... max period:             00007fffffffffff
[    0.247536] ... fixed-purpose events:   0
[    0.247537] ... event mask:             000000000000003f
[    0.247636] rcu: Hierarchical SRCU implementation.
[    0.248106] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.248196] smp: Bringing up secondary CPUs ...
[    0.248426] x86: Booting SMP configuration:
[    0.248427] .... node  #0, CPUs:      #1
[    0.036388] Bit 30 in CPUID ECX not set.
[    0.248769] After schedule_preempt_disabled
[    0.248821] smp: Brought up 1 node, 2 CPUs
[    0.248821] smpboot: Max logical packages: 1
[    0.248821] smpboot: Total of 2 processors activated (15600.11 BogoMIPS)
[    0.250159] devtmpfs: initialized
[    0.250159] x86/mm: Memory block size: 128MB
[    0.252910] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.252918] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.253073] pinctrl core: initialized pinctrl subsystem
[    0.253206] PM: RTC time: 10:39:28, date: 2021-12-09
[    0.253497] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.253570] audit: initializing netlink subsys (disabled)
[    0.253785] audit: type=2000 audit(1639046368.120:1): state=initialized audit_enabled=0 res=1
[    0.254102] thermal_sys: Registered thermal governor 'fair_share'
[    0.254103] thermal_sys: Registered thermal governor 'bang_bang'
[    0.254104] thermal_sys: Registered thermal governor 'step_wise'
[    0.254105] thermal_sys: Registered thermal governor 'user_space'
[    0.254124] cpuidle: using governor menu
[    0.254458] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.254463] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.254769] PCI: Using configuration type 1 for base access
[    0.260193] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.260193] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.260193] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.260845] cryptd: max_cpu_qlen set to 1000
[    0.260943] ACPI: Added _OSI(Module Device)
[    0.260945] ACPI: Added _OSI(Processor Device)
[    0.260946] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.260947] ACPI: Added _OSI(Processor Aggregator Device)
[    0.260952] ACPI: Added _OSI(Linux-Dell-Video)
[    0.260956] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.260960] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.273413] ACPI: DSDT successfully acquired and loaded

[    0.278240] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.281741] ACPI: Interpreter enabled
[    0.281741] ACPI: PM: (supports S0 S1 S3 S5)
[    0.281741] ACPI: Using IOAPIC for interrupt routing
[    0.281741] HEST: Table parsing has been initialized.
[    0.281741] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.281923] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.296048] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.296063] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.296266] acpi PNP0A03:00: _OSC: OS now controls [PME AER PCIeCapability LTR]
[    0.296300] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.296503] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7 window]; [io  0x03b0-0x03df window] ignored
[    0.296983] PCI host bridge to bus 0000:00
[    0.296987] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.296991] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.296995] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff]
[    0.296999] pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff]
[    0.297003] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.297037] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[    0.297345] pci 0000:00:00.2: [1022:1419] type 00 class 0x080600
[    0.297491] pci 0000:00:01.0: [1002:9996] type 00 class 0x030000
[    0.297500] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[    0.297505] pci 0000:00:01.0: reg 0x14: [io  0x1000-0x10ff]
[    0.297509] pci 0000:00:01.0: reg 0x18: [mem 0xf0180000-0xf01bffff]
[    0.297525] pci 0000:00:01.0: enabling Extended Tags
[    0.297557] pci 0000:00:01.0: supports D1 D2
[    0.297687] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[    0.297695] pci 0000:00:01.1: reg 0x10: [mem 0xf01c0000-0xf01c3fff]
[    0.297715] pci 0000:00:01.1: enabling Extended Tags
[    0.297749] pci 0000:00:01.1: supports D1 D2
[    0.297888] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[    0.297902] pci 0000:00:11.0: reg 0x10: [io  0x1410-0x1417]
[    0.297910] pci 0000:00:11.0: reg 0x14: [io  0x1420-0x1423]
[    0.297919] pci 0000:00:11.0: reg 0x18: [io  0x1418-0x141f]
[    0.297926] pci 0000:00:11.0: reg 0x1c: [io  0x1424-0x1427]
[    0.297934] pci 0000:00:11.0: reg 0x20: [io  0x1400-0x140f]
[    0.297941] pci 0000:00:11.0: reg 0x24: [mem 0xf01cc000-0xf01cc7ff]
[    0.298252] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[    0.298265] pci 0000:00:12.0: reg 0x10: [mem 0xf01c8000-0xf01c8fff]
[    0.298610] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[    0.298623] pci 0000:00:12.2: reg 0x10: [mem 0xf01cd000-0xf01cd0ff]
[    0.298693] pci 0000:00:12.2: supports D1 D2
[    0.298694] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.298695] pci 0000:00:12.2: pme_poll = true
[    0.298696] pci 0000:00:12.2: after device_set_wakeup_capable()
[    0.298699] pci 0000:00:12.2: after pci_pme_active()
[    0.299016] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[    0.299029] pci 0000:00:13.0: reg 0x10: [mem 0xf01c9000-0xf01c9fff]
[    0.299372] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[    0.299385] pci 0000:00:13.2: reg 0x10: [mem 0xf01ce000-0xf01ce0ff]
[    0.299456] pci 0000:00:13.2: supports D1 D2
[    0.299457] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.299458] pci 0000:00:13.2: pme_poll = true
[    0.299459] pci 0000:00:13.2: after device_set_wakeup_capable()
[    0.299462] pci 0000:00:13.2: after pci_pme_active()
[    0.299786] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[    0.301057] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[    0.301075] pci 0000:00:14.2: reg 0x10: [mem 0xf01c4000-0xf01c7fff 64bit]
[    0.301135] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.301137] pci 0000:00:14.2: pme_poll = true
[    0.301138] pci 0000:00:14.2: after device_set_wakeup_capable()
[    0.301141] pci 0000:00:14.2: after pci_pme_active()
[    0.301434] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[    0.301780] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[    0.302118] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
[    0.302132] pci 0000:00:14.5: reg 0x10: [mem 0xf01ca000-0xf01cafff]
[    0.302479] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
[    0.302507] pci 0000:00:15.0: enabling Extended Tags
[    0.302554] pci 0000:00:15.0: supports D1 D2
[    0.302938] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
[    0.302970] pci 0000:00:15.1: enabling Extended Tags
[    0.303016] pci 0000:00:15.1: supports D1 D2
[    0.303387] pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
[    0.303414] pci 0000:00:15.2: enabling Extended Tags
[    0.303461] pci 0000:00:15.2: supports D1 D2
[    0.303598] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
[    0.303611] pci 0000:00:16.0: reg 0x10: [mem 0xf01cb000-0xf01cbfff]
[    0.303962] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
[    0.303975] pci 0000:00:16.2: reg 0x10: [mem 0xf01cf000-0xf01cf0ff]
[    0.304046] pci 0000:00:16.2: supports D1 D2
[    0.304048] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.304049] pci 0000:00:16.2: pme_poll = true
[    0.304050] pci 0000:00:16.2: after device_set_wakeup_capable()
[    0.304053] pci 0000:00:16.2: after pci_pme_active()
[    0.304351] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[    0.304477] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[    0.304599] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[    0.304718] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[    0.305007] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[    0.305132] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[    0.305264] pci_bus 0000:01: extended config space not accessible
[    0.305360] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[    0.305370] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.305374] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.305378] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000dffff] (subtractive decode)
[    0.305382] pci 0000:00:14.4:   bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
[    0.305463] pci 0000:00:15.0: PCI bridge to [bus 02]
[    0.305586] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.305623] pci 0000:03:00.0: reg 0x10: [mem 0xf0000000-0xf0007fff 64bit]
[    0.305816] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.305817] pci 0000:03:00.0: pme_poll = true
[    0.305818] pci 0000:03:00.0: after device_set_wakeup_capable()
[    0.305824] pci 0000:03:00.0: after pci_pme_active()
[    0.305862] pci 0000:03:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:15.1 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[    0.308782] pci 0000:00:15.1: PCI bridge to [bus 03]
[    0.308793] pci 0000:00:15.1:   bridge window [mem 0xf0000000-0xf00fffff]
[    0.308802] pci 0000:00:15.2: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.308965] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[    0.308983] pci 0000:04:00.0: reg 0x10: [io  0x0000-0x00ff]
[    0.309004] pci 0000:04:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
[    0.309018] pci 0000:04:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    0.309135] pci 0000:04:00.0: supports D1 D2
[    0.309136] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.309138] pci 0000:04:00.0: pme_poll = true
[    0.309139] pci 0000:04:00.0: after device_set_wakeup_capable()
[    0.309143] pci 0000:04:00.0: after pci_pme_active()
[    0.311787] pci 0000:00:15.2: PCI bridge to [bus 04-ff]
[    0.311797] pci 0000:00:15.2:   bridge window [io  0x0000-0x0fff]
[    0.311800] pci 0000:00:15.2:   bridge window [mem 0x00000000-0x000fffff]
[    0.311805] pci 0000:00:15.2:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    0.311808] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04
[    0.312840] ACPI: PCI: Interrupt link INTA configured for IRQ 0
[    0.313076] ACPI: PCI: Interrupt link INTB configured for IRQ 0
[    0.313302] ACPI: PCI: Interrupt link INTC configured for IRQ 0
[    0.313531] ACPI: PCI: Interrupt link INTD configured for IRQ 0
[    0.313792] ACPI: PCI: Interrupt link INTE configured for IRQ 0
[    0.314038] ACPI: PCI: Interrupt link INTF configured for IRQ 0
[    0.314264] ACPI: PCI: Interrupt link INTG configured for IRQ 0
[    0.314488] ACPI: PCI: Interrupt link INTH configured for IRQ 0
[    0.314556] iommu: Default domain type: Translated 
[    0.314556] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.314717] SCSI subsystem initialized
[    0.314797] libata version 3.00 loaded.
[    0.315760] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[    0.315760] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.315760] pci 0000:00:01.0: vgaarb: bridge control possible
[    0.315762] vgaarb: loaded
[    0.315838] ACPI: bus type USB registered
[    0.315902] usbcore: registered new interface driver usbfs
[    0.315937] usbcore: registered new interface driver hub
[    0.315958] usbcore: registered new device driver usb
[    0.316133] PCI: Using ACPI for IRQ routing
[    0.318275] PCI: pci_cache_line_size set to 64 bytes
[    0.318327] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.318334] e820: reserve RAM buffer [mem 0x5fe46000-0x5fffffff]
[    0.318337] e820: reserve RAM buffer [mem 0x17f000000-0x17fffffff]
[    0.318385] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.318390] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.319838] clocksource: Switched to clocksource tsc-early
[    0.357808] VFS: Disk quotas dquot_6.6.0
[    0.357861] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.358106] pnp: PnP ACPI init
[    0.358742] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
[    0.359544] pnp: PnP ACPI: found 2 devices
[    0.369976] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.370189] NET: Registered PF_INET protocol family
[    0.370338] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.371260] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.371276] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.371339] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.371444] TCP: Hash tables configured (established 32768 bind 32768)
[    0.371524] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.371549] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.372347] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.372390] pci 0000:00:15.2: BAR 15: assigned [mem 0x80000000-0x800fffff 64bit pref]
[    0.372395] pci 0000:00:15.2: BAR 13: assigned [io  0x2000-0x2fff]
[    0.372399] pci 0000:00:14.4: PCI bridge to [bus 01]
[    0.372410] pci 0000:00:15.0: PCI bridge to [bus 02]
[    0.372417] pci 0000:00:15.1: PCI bridge to [bus 03]
[    0.372421] pci 0000:00:15.1:   bridge window [mem 0xf0000000-0xf00fffff]
[    0.372433] pci 0000:04:00.0: BAR 4: assigned [mem 0x80000000-0x80003fff 64bit pref]
[    0.372445] pci 0000:04:00.0: BAR 2: assigned [mem 0x80004000-0x80004fff 64bit pref]
[    0.372456] pci 0000:04:00.0: BAR 0: assigned [io  0x2000-0x20ff]
[    0.372462] pci 0000:00:15.2: PCI bridge to [bus 04]
[    0.372464] pci 0000:00:15.2:   bridge window [io  0x2000-0x2fff]
[    0.372468] pci 0000:00:15.2:   bridge window [mem 0x80000000-0x800fffff 64bit pref]
[    0.372474] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.372476] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.372478] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff]
[    0.372479] pci_bus 0000:00: resource 7 [mem 0x80000000-0xffffffff]
[    0.372481] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7 window]
[    0.372482] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff window]
[    0.372484] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000dffff]
[    0.372485] pci_bus 0000:01: resource 7 [mem 0x80000000-0xffffffff]
[    0.372487] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf00fffff]
[    0.372488] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    0.372489] pci_bus 0000:04: resource 2 [mem 0x80000000-0x800fffff 64bit pref]
[    0.372598] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.372677] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0
[    0.373147] pci 0000:00:12.0: AMD USB device
[    0.373173] pci 0000:00:12.0: AMD USB ohci handoff
[    0.373873] pci 0000:00:12.2: AMD USB device
[    0.373888] pci 0000:00:12.2: AMD USB ehci handoff
[    0.374212] pci 0000:00:12.2: PME# does not work under D3, disabling it
[    0.374573] pci 0000:00:13.0: AMD USB device
[    0.374589] pci 0000:00:13.0: AMD USB ohci handoff
[    0.375282] pci 0000:00:13.2: AMD USB device
[    0.375297] pci 0000:00:13.2: AMD USB ehci handoff
[    0.375615] pci 0000:00:13.2: PME# does not work under D3, disabling it
[    0.376017] pci 0000:00:14.5: AMD USB device
[    0.376034] pci 0000:00:14.5: AMD USB ohci handoff
[    0.376721] pci 0000:00:16.0: AMD USB device
[    0.376738] pci 0000:00:16.0: AMD USB ohci handoff
[    0.377645] pci 0000:00:16.2: AMD USB device
[    0.377665] pci 0000:00:16.2: AMD USB ehci handoff
[    0.378049] pci 0000:00:16.2: PME# does not work under D3, disabling it
[    0.378549] pci 0000:03:00.0: AMD USB xhci handoff
[    0.378654] PCI: CLS 64 bytes, default 64
[    0.378679] pci 0000:00:00.2: AMD-Vi: Applying erratum 746 workaround
[    0.379274] pci 0000:00:01.0: Adding to iommu group 0
[    0.379305] pci 0000:00:01.1: Adding to iommu group 0
[    0.379355] pci 0000:00:11.0: Adding to iommu group 1
[    0.379408] pci 0000:00:12.0: Adding to iommu group 2
[    0.379436] pci 0000:00:12.2: Adding to iommu group 2
[    0.379490] pci 0000:00:13.0: Adding to iommu group 3
[    0.379519] pci 0000:00:13.2: Adding to iommu group 3
[    0.379578] pci 0000:00:14.0: Adding to iommu group 4
[    0.379607] pci 0000:00:14.2: Adding to iommu group 4
[    0.379636] pci 0000:00:14.3: Adding to iommu group 4
[    0.379681] pci 0000:00:14.4: Adding to iommu group 5
[    0.379726] pci 0000:00:14.5: Adding to iommu group 6
[    0.379785] pci 0000:00:15.0: Adding to iommu group 7
[    0.379818] pci 0000:00:15.1: Adding to iommu group 7
[    0.379849] pci 0000:00:15.2: Adding to iommu group 7
[    0.379901] pci 0000:00:16.0: Adding to iommu group 8
[    0.379932] pci 0000:00:16.2: Adding to iommu group 8
[    0.380007] pci 0000:00:18.0: Adding to iommu group 9
[    0.380038] pci 0000:00:18.1: Adding to iommu group 9
[    0.380069] pci 0000:00:18.2: Adding to iommu group 9
[    0.380099] pci 0000:00:18.3: Adding to iommu group 9
[    0.380128] pci 0000:00:18.4: Adding to iommu group 9
[    0.380159] pci 0000:00:18.5: Adding to iommu group 9
[    0.380183] pci 0000:03:00.0: Adding to iommu group 7
[    0.380207] pci 0000:04:00.0: Adding to iommu group 7
[    0.385924] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[    0.385929] AMD-Vi: Extended features (0x800000853): PreF PPR GT IA
[    0.385934] AMD-Vi: Interrupt remapping enabled
[    0.386188] software IO TLB: tearing down default memory pool
[    0.388142] LVT offset 0 assigned for vector 0x400
[    0.388194] perf: AMD IBS detected (0x000000ff)
[    0.388203] amd_uncore: 4  amd_nb counters detected
[    0.389766] Initialise system trusted keyrings
[    0.389885] workingset: timestamp_bits=37 max_order=20 bucket_order=0
[    0.397841] zbud: loaded
[    0.399638] NET: Registered PF_ALG protocol family
[    0.399647] Key type asymmetric registered
[    0.399648] Asymmetric key parser 'x509' registered
[    0.399768] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.399867] io scheduler mq-deadline registered
[    0.399869] io scheduler kyber registered
[    0.399938] alg: self-tests disabled
[    0.400852] pcieport 0000:00:15.0: PME: Signaling with IRQ 25
[    0.401173] pcieport 0000:00:15.1: PME: Signaling with IRQ 26
[    0.401280] pcieport 0000:00:15.2: enabling device (0000 -> 0003)
[    0.401782] pcieport 0000:00:15.2: PME: Signaling with IRQ 27
[    0.402251] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.404854] ACPI: button: Power Button [PWRF]
[    0.404973] ACPI: \_SB_.P000: Found 2 idle states
[    0.405241] ACPI: \_SB_.P001: Found 2 idle states
[    0.407336] thermal LNXTHERM:00: registered as thermal_zone0
[    0.407340] ACPI: thermal: Thermal Zone [TZ00] (6 C)
[    0.407473] GHES: Failed to enable APEI firmware first mode.
[    0.407903] Non-volatile memory driver v1.3
[    0.408053] AMD-Vi: AMD IOMMUv2 loaded and initialized
[    0.408485] ahci 0000:00:11.0: version 3.0
[    0.409079] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0x40 impl SATA mode
[    0.409084] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pio 
[    0.411684] scsi host0: ahci
[    0.412252] scsi host1: ahci
[    0.412660] scsi host2: ahci
[    0.413069] scsi host3: ahci
[    0.413463] scsi host4: ahci
[    0.413855] scsi host5: ahci
[    0.414267] scsi host6: ahci
[    0.414656] scsi host7: ahci
[    0.414887] ata1: DUMMY
[    0.414888] ata2: DUMMY
[    0.414890] ata3: DUMMY
[    0.414890] ata4: DUMMY
[    0.414891] ata5: DUMMY
[    0.414892] ata6: DUMMY
[    0.414894] ata7: SATA max UDMA/133 abar m2048@0xf01cc000 port 0xf01cc400 irq 19
[    0.414896] ata8: DUMMY
[    0.415123] ACPI: bus type drm_connector registered
[    0.415561] libphy: Fixed MDIO Bus: probed
[    0.415603] i8042: PNP: No PS/2 controller found.
[    0.415604] i8042: Probing ports directly.
[    0.417729] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.417814] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.417973] mousedev: PS/2 mouse device common for all mice
[    0.418092] rtc_cmos 00:01: RTC can wake from S4
[    0.418530] rtc_cmos 00:01: registered as rtc0
[    0.418553] rtc_cmos 00:01: setting system clock to 2021-12-09T10:39:28 UTC (1639046368)
[    0.418617] rtc_cmos 00:01: alarms up to one day, y3k, 114 bytes nvram, hpet irqs
[    0.418739] device-mapper: uevent: version 1.0.3
[    0.418941] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    0.419311] hid: raw HID events driver (C) Jiri Kosina
[    0.419391] usbcore: registered new interface driver usbhid
[    0.419393] usbhid: USB HID core driver
[    0.419504] Initializing XFRM netlink socket
[    0.419513] NET: Registered PF_PACKET protocol family
[    0.419521] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending.
[    0.419889] microcode: CPU0: patch_level=0x0600111f
[    0.419901] microcode: CPU1: patch_level=0x0600111f
[    0.419994] microcode: Microcode Update Driver: v2.2.
[    0.419999] IPI shorthand broadcast: enabled
[    0.420009] AVX version of gcm_enc/dec engaged.
[    0.420042] AES CTR mode by8 optimization enabled
[    0.420473] sched_clock: Marking stable (385059878, 35388202)->(422660268, -2212188)
[    0.420786] registered taskstats version 1
[    0.420805] Loading compiled-in X.509 certificates
[    0.422038] Loaded X.509 cert 'Build time autogenerated kernel key: 91b5e042fe2c53b9e28e9b8228b2a1504b5ab494'
[    0.422205] zswap: loaded using pool lzo/zbud
[    0.422387] kmemleak: Kernel memory leak detector initialized (mem pool available: 15686)
[    0.422389] kmemleak: Automatic memory scanning thread started
[    0.422389] debug_vm_pgtable: [debug_vm_pgtable         ]: Validating architecture page table helpers
[    0.427010] Key type encrypted registered
[    0.429475] PM:   Magic number: 1:904:678
[    0.725837] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.726127] ata7.00: ATA-9: SanDisk SDSSDP064G, 2.0.0, max UDMA/133
[    0.726130] ata7.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 32)
[    0.727398] ata7.00: configured for UDMA/133
[    0.727761] scsi 6:0:0:0: Direct-Access     ATA      SanDisk SDSSDP06 0    PQ: 0 ANSI: 5
[    0.728290] sd 6:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[    0.728305] sd 6:0:0:0: [sda] Write Protect is off
[    0.728309] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.728327] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.729869]  sda: sda1 sda2 sda3
[    0.730481] sd 6:0:0:0: [sda] Attached SCSI disk
[    0.731076] random: random: 1
[    0.731078] random: random: 2
[    0.731078] random: random: 3
[    0.731079] random: random: 4
[    0.740903] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    0.740938] VFS: Mounted root (ext4 filesystem) on device 8:3.
[    0.742749] devtmpfs: mounted
[    0.742765] After kernel_init_freeable
[    0.746415] Freeing unused kernel image (initmem) memory: 1688K
[    0.754852] Write protecting the kernel read-only data: 22528k
[    0.755442] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    0.755990] Freeing unused kernel image (rodata/data gap) memory: 1932K
[    0.789410] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.789414] rodata_test: all tests were successful
[    0.789415] After mark_readonly
[    0.789416] After pti_finalize
[    0.789428] rcu_end_inkernel_boot
[    0.789435] Run /sbin/init as init process
[    0.789436]   with arguments:
[    0.789437]     /sbin/init
[    0.789438]     noisapnp
[    0.789439]   with environment:
[    0.789440]     HOME=/
[    0.789440]     TERM=linux
[    0.789441]     BOOT_IMAGE=/boot/vmlinuz-5.16.0-rc4-00117-gdcb05836d4a2
[    0.800022] random: random: 1
[    0.800026] random: random: 2
[    0.800026] random: random: 3
[    0.800027] random: random: 4
[    0.824284] random: random: 1
[    0.824287] random: random: 2
[    0.824288] random: random: 3
[    0.824289] random: random: 4
[    0.824289] random: fast init done
[    0.944026] systemd[1]: Inserted module 'autofs4'
[    0.963894] NET: Registered PF_INET6 protocol family
[    0.964585] Segment Routing with IPv6
[    0.964603] In-situ OAM (IOAM) with IPv6
[    0.989829] systemd[1]: systemd 249.7-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP -LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    0.990093] systemd[1]: Detected architecture x86-64.
[    0.991378] systemd[1]: Hostname set to <kodi>.
[    1.182121] systemd[1]: Queued start job for default target Graphical Interface.
[    1.182438] random: systemd: uninitialized urandom read (16 bytes read)
[    1.184499] systemd[1]: Created slice Slice /system/getty.
[    1.184627] random: systemd: uninitialized urandom read (16 bytes read)
[    1.185311] systemd[1]: Created slice Slice /system/modprobe.
[    1.185338] random: systemd: uninitialized urandom read (16 bytes read)
[    1.186515] systemd[1]: Created slice User and Session Slice.
[    1.186684] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    1.186848] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    1.187242] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    1.187286] systemd[1]: Reached target Local Encrypted Volumes.
[    1.187344] systemd[1]: Reached target Path Units.
[    1.187375] systemd[1]: Reached target Remote File Systems.
[    1.187402] systemd[1]: Reached target Slice Units.
[    1.187438] systemd[1]: Reached target Swaps.
[    1.187492] systemd[1]: Reached target Local Verity Protected Volumes.
[    1.187714] systemd[1]: Listening on fsck to fsckd communication Socket.
[    1.187838] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    1.188102] systemd[1]: Listening on Journal Audit Socket.
[    1.188300] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.188512] systemd[1]: Listening on Journal Socket.
[    1.188732] systemd[1]: Listening on Network Service Netlink Socket.
[    1.189274] systemd[1]: Listening on udev Control Socket.
[    1.189459] systemd[1]: Listening on udev Kernel Socket.
[    1.191505] systemd[1]: Mounting Huge Pages File System...
[    1.194176] systemd[1]: Mounting POSIX Message Queue File System...
[    1.196895] systemd[1]: Mounting Kernel Debug File System...
[    1.199639] systemd[1]: Mounting Kernel Trace File System...
[    1.202568] systemd[1]: Starting Create List of Static Device Nodes...
[    1.206985] systemd[1]: Starting Load Kernel Module configfs...
[    1.209599] systemd[1]: Starting Load Kernel Module drm...
[    1.212233] systemd[1]: Starting Load Kernel Module fuse...
[    1.216499] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    1.216587] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    1.216630] systemd[1]: Reached target Local File Systems.
[    1.216699] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped.
[    1.221020] systemd[1]: Starting Journal Service...
[    1.221144] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    1.223726] systemd[1]: Starting Load/Save Random Seed...
[    1.226350] systemd[1]: Starting Apply Kernel Variables...
[    1.229116] systemd[1]: Starting Create System Users...
[    1.239092] fuse: init (API version 7.35)
[    1.239947] systemd[1]: Starting Coldplug All udev Devices...
[    1.257001] systemd[1]: Mounted Huge Pages File System.
[    1.257242] systemd[1]: Mounted POSIX Message Queue File System.
[    1.257450] systemd[1]: Mounted Kernel Debug File System.
[    1.257633] systemd[1]: Mounted Kernel Trace File System.
[    1.258325] systemd[1]: Finished Create List of Static Device Nodes.
[    1.259046] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    1.259348] systemd-journald[133]: /etc/systemd/journald.conf.d/storage.conf:2: Failed to parse storage setting, ignoring: volative
[    1.259648] systemd[1]: Finished Load Kernel Module configfs.
[    1.260566] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    1.261147] systemd[1]: Finished Load Kernel Module drm.
[    1.261704] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    1.262296] systemd[1]: Finished Load Kernel Module fuse.
[    1.267561] systemd[1]: Finished Apply Kernel Variables.
[    1.273183] systemd[1]: Mounting FUSE Control File System...
[    1.280935] systemd[1]: Mounting Kernel Configuration File System...
[    1.289008] systemd[1]: Finished Create System Users.
[    1.289406] systemd[1]: Mounted FUSE Control File System.
[    1.294384] systemd[1]: Starting Create Static Device Nodes in /dev...
[    1.297394] systemd[1]: Mounted Kernel Configuration File System.
[    1.339168] systemd[1]: Finished Create Static Device Nodes in /dev.
[    1.344304] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    1.362636] systemd[1]: Started Journal Service.
[    1.376684] systemd-journald[133]: Received client request to flush runtime journal.
[    1.445761] tsc: Refined TSC clocksource calibration: 3900.220 MHz
[    1.445769] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x70705438231, max_idle_ns: 881590769372 ns
[    1.445812] clocksource: Switched to clocksource tsc
[    1.556585] acpi_cpufreq: overriding BIOS provided _PSD data
[    1.758018] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.764046] sd 6:0:0:0: Attached scsi generic sg0 type 0
[    1.768308] ehci-pci: EHCI PCI platform driver
[    1.768845] QUIRK: Enable AMD PLL fix
[    1.768889] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.768918] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.768932] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.768940] ehci-pci 0000:00:12.2: debug port 1
[    1.769059] ehci-pci 0000:00:12.2: irq 17, io mem 0xf01cd000
[    1.776759] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.776967] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16
[    1.776970] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.776972] usb usb1: Product: EHCI Host Controller
[    1.776974] usb usb1: Manufacturer: Linux 5.16.0-rc4-00117-gdcb05836d4a2 ehci_hcd
[    1.776976] usb usb1: SerialNumber: 0000:00:12.2
[    1.777431] hub 1-0:1.0: USB hub found
[    1.777456] hub 1-0:1.0: 5 ports detected
[    1.780230] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.780253] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.780264] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.780273] ehci-pci 0000:00:13.2: debug port 1
[    1.780355] ehci-pci 0000:00:13.2: irq 17, io mem 0xf01ce000
[    1.783858] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    1.783864] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
[    1.786568] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.786755] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.786960] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16
[    1.786963] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.786966] usb usb2: Product: EHCI Host Controller
[    1.786968] usb usb2: Manufacturer: Linux 5.16.0-rc4-00117-gdcb05836d4a2 ehci_hcd
[    1.786969] usb usb2: SerialNumber: 0000:00:13.2
[    1.794319] hub 2-0:1.0: USB hub found
[    1.794345] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    1.794356] hub 2-0:1.0: 5 ports detected
[    1.795176] ehci-pci 0000:00:16.2: EHCI Host Controller
[    1.795199] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[    1.795211] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.795220] ehci-pci 0000:00:16.2: debug port 1
[    1.795303] ehci-pci 0000:00:16.2: irq 17, io mem 0xf01cf000
[    1.801771] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    1.802017] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16
[    1.802020] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.802023] usb usb3: Product: EHCI Host Controller
[    1.802025] usb usb3: Manufacturer: Linux 5.16.0-rc4-00117-gdcb05836d4a2 ehci_hcd
[    1.802027] usb usb3: SerialNumber: 0000:00:16.2
[    1.802460] hub 3-0:1.0: USB hub found
[    1.802485] hub 3-0:1.0: 4 ports detected
[    1.834053] ohci-pci: OHCI PCI platform driver
[    1.834696] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.834718] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[    1.834851] ohci-pci 0000:00:12.0: irq 18, io mem 0xf01c8000
[    1.836659] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.836697] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.836797] ohci-pci 0000:00:13.0: irq 18, io mem 0xf01c9000
[    1.837314] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.837339] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[    1.837415] ohci-pci 0000:00:14.5: irq 18, io mem 0xf01ca000
[    1.853985] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    1.860333] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[    1.860421] ohci-pci 0000:00:16.0: irq 18, io mem 0xf01cb000
[    1.872313] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.872339] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
[    1.899343] r8169 0000:04:00.0: enabling device (0000 -> 0003)
[    1.901977] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.16
[    1.901992] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.901997] usb usb4: Product: OHCI PCI host controller
[    1.902001] usb usb4: Manufacturer: Linux 5.16.0-rc4-00117-gdcb05836d4a2 ohci_hcd
[    1.902006] usb usb4: SerialNumber: 0000:00:12.0
[    1.921287] hub 4-0:1.0: USB hub found
[    1.921322] hub 4-0:1.0: 5 ports detected
[    1.922662] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.16
[    1.922668] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.922670] usb usb6: Product: OHCI PCI host controller
[    1.922672] usb usb6: Manufacturer: Linux 5.16.0-rc4-00117-gdcb05836d4a2 ohci_hcd
[    1.922674] usb usb6: SerialNumber: 0000:00:14.5
[    1.926146] hub 6-0:1.0: USB hub found
[    1.928920] hub 6-0:1.0: 2 ports detected
[    1.929649] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.16
[    1.929652] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.929654] usb usb5: Product: OHCI PCI host controller
[    1.929656] usb usb5: Manufacturer: Linux 5.16.0-rc4-00117-gdcb05836d4a2 ohci_hcd
[    1.929658] usb usb5: SerialNumber: 0000:00:13.0
[    1.930119] hub 5-0:1.0: USB hub found
[    1.930146] hub 5-0:1.0: 5 ports detected
[    1.931266] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.16
[    1.931275] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.931280] usb usb7: Product: OHCI PCI host controller
[    1.931286] usb usb7: Manufacturer: Linux 5.16.0-rc4-00117-gdcb05836d4a2 ohci_hcd
[    1.931289] usb usb7: SerialNumber: 0000:00:16.0
[    1.931812] xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000
[    1.932115] hub 7-0:1.0: USB hub found
[    1.932142] hub 7-0:1.0: 4 ports detected
[    1.936862] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16
[    1.936868] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.936871] usb usb8: Product: xHCI Host Controller
[    1.936873] usb usb8: Manufacturer: Linux 5.16.0-rc4-00117-gdcb05836d4a2 xhci-hcd
[    1.936874] usb usb8: SerialNumber: 0000:03:00.0
[    1.959208] hub 8-0:1.0: USB hub found
[    1.959250] hub 8-0:1.0: 2 ports detected
[    1.959572] libphy: r8169: probed
[    1.968302] r8169 0000:04:00.0 eth0: RTL8168f/8111f, 08:60:6e:74:7a:51, XID 480, IRQ 28
[    1.968311] r8169 0000:04:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    1.969045] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.969066] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9
[    1.969079] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed
[    1.969161] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.969286] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.16
[    1.969290] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.969292] usb usb9: Product: xHCI Host Controller
[    1.969294] usb usb9: Manufacturer: Linux 5.16.0-rc4-00117-gdcb05836d4a2 xhci-hcd
[    1.969296] usb usb9: SerialNumber: 0000:03:00.0
[    2.001556] [drm] radeon kernel modesetting enabled.
[    2.001626] radeon 0000:00:01.0: vgaarb: deactivate vga console
[    2.005474] hub 9-0:1.0: USB hub found
[    2.005508] hub 9-0:1.0: 2 ports detected
[    2.006509] Console: switching to colour dummy device 80x25
[    2.007913] [drm] initializing kernel modesetting (ARUBA 0x1002:0x9996 0x1002:0x9996 0x00).
[    2.007984] ATOM BIOS: 113
[    2.008085] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[    2.008089] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[    2.008098] [drm] Detected VRAM RAM=512M, BAR=256M
[    2.008099] [drm] RAM width 64bits DDR
[    2.008190] [drm] radeon: 512M of VRAM memory ready
[    2.008195] [drm] radeon: 1024M of GTT memory ready.
[    2.008234] [drm] Loading ARUBA Microcode
[    2.048810] 1
[    2.048856] 2
[    2.049335] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[    2.049344] 3
[    2.049345] 4
[    2.049346] 5
[    2.049346] 7
[    2.049351] 8
[    2.049352] 9
[    2.049417] 1
[    2.049453] 2
[    2.049945] 3
[    2.049947] 4
[    2.049948] 5
[    2.049948] 7
[    2.049950] 8
[    2.049950] 9
[    2.071192] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input1
[    2.071485] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input2
[    2.077327] [drm] Internal thermal controller without fan control
[    2.077671] [drm] radeon: dpm initialized
[    2.086035] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
[    2.086091] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    2.112823] snd_hda_codec_realtek hdaudioC1D0: ALC892: SKU not ready 0x00000100
[    2.113582] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
[    2.113588] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.113592] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    2.113594] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    2.113596] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0
[    2.113598] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    2.113600] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    2.113602] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    2.113603] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    2.113605] snd_hda_codec_realtek hdaudioC1D0:      CD=0x1c
[    2.137408] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input3
[    2.137642] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input4
[    2.137914] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input5
[    2.138235] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
[    2.138538] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
[    2.138902] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
[    2.139475] input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[    2.139797] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[    2.149902] [drm] GART: Restore entries: num cpu pages 262144, num gpu pages 262144
[    2.154993] [drm] GART: Done restoring entries
[    2.154997] [drm] PCIE GART of 1024M enabled (table at 0x00000000001D6000).
[    2.155224] radeon 0000:00:01.0: WB enabled
[    2.155228] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00
[    2.155606] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18
[    2.167772] usb 4-1: new low-speed USB device number 2 using ohci-pci
[    2.215059] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18
[    2.215066] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c
[    2.215068] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04
[    2.215070] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08
[    2.215072] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c
[    2.215074] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10
[    2.222126] r8169 0000:04:00.0 enp4s0: renamed from eth0
[    2.234035] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[    2.234222] radeon 0000:00:01.0: radeon: using MSI.
[    2.234289] [drm] radeon: irq initialized.
[    2.305621] r8169 0000:04:00.0: Direct firmware load for rtl_nic/rtl8168f-1.fw failed with error -2
[    2.305630] r8169 0000:04:00.0: Unable to load firmware rtl_nic/rtl8168f-1.fw (-2)
[    2.306523] RTL8211E Gigabit Ethernet r8169-0-400:00: attached PHY driver (mii_bus:phy_addr=r8169-0-400:00, irq=MAC)
[    2.308727] [drm] ring test on 0 succeeded in 2 usecs
[    2.311507] [drm] ring test on 3 succeeded in 1 usecs
[    2.311519] [drm] ring test on 4 succeeded in 3 usecs
[    2.332514] usb 4-1: New USB device found, idVendor=046d, idProduct=c016, bcdDevice= 3.40
[    2.332521] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.332524] usb 4-1: Product: Optical USB Mouse
[    2.332526] usb 4-1: Manufacturer: Logitech
[    2.340108] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/0003:046D:C016.0001/input/input11
[    2.340507] hid-generic 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:12.0-1/input0
[    2.361004] [drm] ring test on 5 succeeded in 2 usecs
[    2.363026] [drm] UVD initialized successfully.
[    2.370578] r8169 0000:04:00.0 enp4s0: Link is Down
[    2.480862] [drm] ring test on 6 succeeded in 18 usecs
[    2.480876] [drm] ring test on 7 succeeded in 3 usecs
[    2.480878] [drm] VCE initialized successfully.
[    2.481055] [drm] ib test on ring 0 succeeded in 0 usecs
[    2.481105] [drm] ib test on ring 3 succeeded in 0 usecs
[    2.481151] [drm] ib test on ring 4 succeeded in 0 usecs
[    2.493760] [drm] ib test on ring 5 succeeded
[    2.506761] [drm] ib test on ring 6 succeeded in 1 usecs
[    2.517758] [drm] ib test on ring 7 succeeded in 1 usecs
[    2.521546] [drm] Radeon Display Connectors
[    2.521550] [drm] Connector 0:
[    2.521551] [drm]   DP-1
[    2.521552] [drm]   HPD1
[    2.521553] [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[    2.521556] [drm]   Encoders:
[    2.521557] [drm]     DFP1: INTERNAL_UNIPHY2
[    2.521558] [drm] Connector 1:
[    2.521559] [drm]   VGA-1
[    2.521560] [drm]   HPD2
[    2.521560] [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[    2.521562] [drm]   Encoders:
[    2.521563] [drm]     CRT1: INTERNAL_UNIPHY2
[    2.521564] [drm]     CRT1: NUTMEG
[    2.521565] [drm] Connector 2:
[    2.521566] [drm]   HDMI-A-1
[    2.521566] [drm]   HPD3
[    2.521567] [drm]   DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[    2.521569] [drm]   Encoders:
[    2.521570] [drm]     DFP2: INTERNAL_UNIPHY
[    2.581753] random: crng init done
[    2.581756] random: 7 urandom warning(s) missed due to ratelimiting
[    2.654343] [drm] fb mappable at 0xE03E9000
[    2.654350] [drm] vram apper at 0xE0000000
[    2.654352] [drm] size 5242880
[    2.654354] [drm] fb depth is 24
[    2.654356] [drm]    pitch is 5120
[    2.655200] fbcon: radeon (fb0) is primary device
[    2.742704] Console: switching to colour frame buffer device 160x64
[    2.746687] radeon 0000:00:01.0: [drm] fb0: radeon frame buffer device
[    2.752993] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[    2.897760] usb 4-2: new low-speed USB device number 3 using ohci-pci
[    2.930090] [drm] amdgpu kernel modesetting enabled.
[    3.062592] usb 4-2: New USB device found, idVendor=413c, idProduct=2106, bcdDevice= 1.01
[    3.062602] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.062607] usb 4-2: Product: Dell QuietKey Keyboard
[    3.062610] usb 4-2: Manufacturer: DELL
[    3.070902] input: DELL Dell QuietKey Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/0003:413C:2106.0002/input/input12
[    3.124032] hid-generic 0003:413C:2106.0002: input,hidraw1: USB HID v1.10 Keyboard [DELL Dell QuietKey Keyboard] on usb-0000:00:12.0-2/input0
[    4.934658] r8169 0000:04:00.0 enp4s0: Link is Up - 1Gbps/Full - flow control rx/tx
[    4.934677] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready