[    0.030013] smpboot: SMP motherboard not detected
[    0.031012] smpboot: Local APIC not detected. Using dummy APIC emulation.
[    0.032010] smpboot: SMP disabled
[    0.033011] Performance Events: no PMU driver, software events only.
[    0.036493] Brought up 1 CPUs
[    0.037018] smpboot: Total of 1 processors activated (996.14 BogoMIPS)
[    0.039790] devtmpfs: initialized
[    0.042398] NET: Registered protocol family 16
[    0.047365] PCI: PCI BIOS revision 2.10 entry at 0xfd4b7, last bus=0
[    0.048014] PCI: Using configuration type 1 for base access
[    0.068549] bio: create slab <bio-0> at 0
[    0.070201] ACPI: Interpreter disabled.
[    0.072369] vgaarb: loaded
[    0.074402] SCSI subsystem initialized
[    0.076606] PCI: Probing PCI hardware
[    0.077042] PCI: root bus 00: using default resources
[    0.077057] PCI: Probing PCI hardware (bus 00)
[    0.077296] PCI host bridge to bus 0000:00
[    0.078052] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.079023] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.080034] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.081212] pci 0000:00:01.0: [1022:2080] type 00 class 0x060000
[    0.081355] pci 0000:00:01.0: reg 10: [io  0xac1c-0xac1f]
[    0.082384] pci 0000:00:01.2: [1022:2082] type 00 class 0x101000
[    0.082631] pci 0000:00:01.2: reg 10: [mem 0xfe020000-0xfe023fff]
[    0.083930] pci 0000:00:09.0: [1106:3053] type 00 class 0x020000
[    0.083974] pci 0000:00:09.0: reg 10: [io  0x1000-0x10ff]
[    0.084047] pci 0000:00:09.0: reg 14: [mem 0xfe029000-0xfe0290ff]
[    0.084158] pci 0000:00:09.0: supports D1 D2
[    0.084181] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.084251] pci 0000:00:0a.0: [1106:3053] type 00 class 0x020000
[    0.084294] pci 0000:00:0a.0: reg 10: [io  0x1400-0x14ff]
[    0.084328] pci 0000:00:0a.0: reg 14: [mem 0xfe029100-0xfe0291ff]
[    0.084437] pci 0000:00:0a.0: supports D1 D2
[    0.084459] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.084516] pci 0000:00:0b.0: [1106:3053] type 00 class 0x020000
[    0.084559] pci 0000:00:0b.0: reg 10: [io  0x1800-0x18ff]
[    0.084593] pci 0000:00:0b.0: reg 14: [mem 0xfe029200-0xfe0292ff]
[    0.084702] pci 0000:00:0b.0: supports D1 D2
[    0.084723] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.084785] pci 0000:00:0c.0: [168c:1014] type 00 class 0x020000
[    0.084829] pci 0000:00:0c.0: reg 10: [mem 0xfe000000-0xfe00ffff]
[    0.085099] pci 0000:00:0f.0: [1022:2090] type 00 class 0x060100
[    0.085415] pci 0000:00:0f.0: reg 10: [io  0x24b0-0x24b7]
[    0.085680] pci 0000:00:0f.0: reg 14: [io  0x1c00-0x1cff]
[    0.085946] pci 0000:00:0f.0: reg 18: [io  0x2400-0x243f]
[    0.086249] pci 0000:00:0f.0: reg 1c: [io  0x2480-0x249f]
[    0.086520] pci 0000:00:0f.0: reg 20: [io  0x2000-0x207f]
[    0.086804] pci 0000:00:0f.0: reg 24: [io  0x2440-0x247f]
[    0.087406] pci 0000:00:0f.2: [1022:209a] type 00 class 0x010180
[    0.088324] pci 0000:00:0f.2: reg 20: [io  0x24a0-0x24af]
[    0.089098] pci 0000:00:0f.4: [1022:2094] type 00 class 0x0c0310
[    0.089446] pci 0000:00:0f.4: reg 10: [mem 0xfe026000-0xfe026fff]
[    0.090983] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
[    0.091328] pci 0000:00:0f.5: [1022:2095] type 00 class 0x0c0320
[    0.091669] pci 0000:00:0f.5: reg 10: [mem 0xfe027000-0xfe027fff]
[    0.093214] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
[    0.093452] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.096681] PCI: pci_cache_line_size set to 32 bytes
[    0.097072] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.097089] e820: reserve RAM buffer [mem 0x0f7b0000-0x0fffffff]
[    0.098308] Switching to clocksource pit
[    0.099485] pnp: PnP ACPI: disabled
[    0.120842] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.120961] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.121108] NET: Registered protocol family 2
[    0.123046] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.124351] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[    0.125759] TCP: Hash tables configured (established 2048 bind 2048)
[    0.126985] TCP: reno registered
[    0.128712] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.129240] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.130311] NET: Registered protocol family 1
[    0.131783] RPC: Registered named UNIX socket transport module.
[    0.132566] RPC: Registered udp transport module.
[    0.133693] RPC: Registered tcp transport module.
[    0.134811] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.135763] PCI: CLS 64 bytes, default 32
[    0.136050] Trying to unpack rootfs image as initramfs...
[    1.321930] Freeing initrd memory: 6152k freed
[    1.330423] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.332807] microcode: AMD CPU family 0x5 not supported
[    1.352496] NFS: Registering the id_resolver key type
[    1.353802] Key type id_resolver registered
[    1.355465] Key type id_legacy registered
[    1.356587] msgmni has been set to 480
[    1.358199] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.359403] io scheduler noop registered
[    1.360189] io scheduler deadline registered
[    1.361036] io scheduler cfq registered (default)
[    1.496627] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.498084] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[    1.500151] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[    1.503176] Linux agpgart interface v0.103
[    1.517891] brd: module loaded
[    1.519261] ACPI Exception: AE_BAD_PARAMETER, Thread 3464682432 could not acquire Mutex [0x1] (20121018/utmutex-278)
[    1.522245] ACPI Exception: AE_BAD_PARAMETER, Thread 3464682432 could not acquire Mutex [0x1] (20121018/utmutex-278)
[    1.525212] cs5535-gpio cs5535-gpio: reserved resource region [io  0x1c00-0x1cff]
[    1.526972] ACPI Exception: AE_BAD_PARAMETER, Thread 3464682432 could not acquire Mutex [0x1] (20121018/utmutex-278)
[    1.529917] ACPI Exception: AE_BAD_PARAMETER, Thread 3464682432 could not acquire Mutex [0x1] (20121018/utmutex-278)
[    1.533905] ACPI Exception: AE_BAD_PARAMETER, Thread 3464682432 could not acquire Mutex [0x1] (20121018/utmutex-278)
[    1.537883] cs5535-mfd 0000:00:0f.0: 5 devices registered.
[    1.539564] Uniform Multi-Platform E-IDE driver
[    1.540590] ide-gd driver 1.18
[    1.542086] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.546178] i8042: No controller found
[    1.548095] mousedev: PS/2 mouse device common for all mice
[    1.549388] cpuidle: using governor ladder
[    1.549703] cpuidle: using governor menu
[    1.552930] TCP: cubic registered
[    1.553910] NET: Registered protocol family 17
[    1.555435] Key type dns_resolver registered
[    1.556369] Using IPI No-Shortcut mode
[    1.560543] Freeing unused kernel memory: 404k freed
[    1.562304] Write protecting the kernel text: 2920k
[    1.563086] Write protecting the kernel read-only data: 964k
[    1.633105] udevd[900]: starting version 175
[    1.831504] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[    1.876356] via-rhine 0000:00:09.0 eth0: VIA Rhine III (Management Adapter) at 0xfe029000, 00:0d:b9:15:6b:e0, IRQ 10
[    1.877708] via-rhine 0000:00:09.0 eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1
[    1.899687] via-rhine 0000:00:0a.0 eth1: VIA Rhine III (Management Adapter) at 0xfe029100, 00:0d:b9:15:6b:e1, IRQ 11
[    1.902032] via-rhine 0000:00:0a.0 eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000
[    1.938725] amd74xx 0000:00:0f.2: UDMA100 controller
[    1.939667] amd74xx 0000:00:0f.2: IDE controller (0x1022:0x209a rev 0x01)
[    1.941187] amd74xx 0000:00:0f.2: IDE port disabled
[    1.941987] amd74xx 0000:00:0f.2: not 100% native mode: will probe irqs later
[    1.943525]     ide0: BM-DMA at 0x24a0-0x24a7
[    1.943618] Probing IDE interface ide0...
[    1.982216] usbcore: registered new interface driver usbfs
[    1.997778] usbcore: registered new interface driver hub
[    2.009781] usbcore: registered new device driver usb
[    2.050872] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.112723] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.252847] hda: HMS360404D5CF00, CFA DISK drive
[    2.331615] Switching to clocksource tsc
[    2.866607] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[    3.527326] hda: UDMA/33 mode selected
[    3.577206] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    3.638015] hda: max request size: 128KiB
[    3.650071] hda: 7999488 sectors (4095 MB) w/128KiB Cache, CHS=7936/16/63
[    3.817826] hda: cache flushes supported
[    3.839594]  hda: hda1
[    3.857913] via-rhine 0000:00:0b.0 eth2: VIA Rhine III (Management Adapter) at 0xfe029200, 00:0d:b9:15:6b:e2, IRQ 9
[    3.890009] via-rhine 0000:00:0b.0 eth2: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000
[    3.920018] ohci_hcd 0000:00:0f.4: setting latency timer to 64
[    3.920062] ohci_hcd 0000:00:0f.4: OHCI Host Controller
[    3.947528] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 1
[    3.969806] ohci_hcd 0000:00:0f.4: irq 9, io mem 0xfe026000
[    4.015215] Clocksource tsc unstable (delta = 183941627 ns)
[    4.032041] Switching to clocksource pit
[    4.095359] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    4.096734] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.097410] usb usb1: Product: OHCI Host Controller
[    4.099076] usb usb1: Manufacturer: Linux 3.8.11-voyage ohci_hcd
[    4.100116] usb usb1: SerialNumber: 0000:00:0f.4
[    4.102146] hub 1-0:1.0: USB hub found
[    4.102476] hub 1-0:1.0: 4 ports detected
[    4.123812] libata version 3.00 loaded.
[   10.048823] udevd[1128]: starting version 175
[   10.735994] AMD Geode RNG detected
[   10.855341] cs5535-mfgpt cs5535-mfgpt: reserved resource region [io  0x2400-0x243f]
[   10.856409] cs5535-mfgpt cs5535-mfgpt: 2 MFGPT timers available
[   10.938272] cs5535-smb cs5535-smb: SCx200 device 'CS5535 ACB0' registered
[   11.133227] geode-aes: GEODE AES engine enabled.
[   11.136133] ehci-pci: EHCI PCI platform driver
[   11.139359] ehci-pci 0000:00:0f.5: setting latency timer to 64
[   11.139408] ehci-pci 0000:00:0f.5: EHCI Host Controller
[   11.146374] ehci-pci 0000:00:0f.5: new USB bus registered, assigned bus number 2
[   11.154596] ehci-pci 0000:00:0f.5: cache line size of 64 is not supported
[   11.154651] ehci-pci 0000:00:0f.5: irq 9, io mem 0xfe027000
[   11.166797] ehci-pci 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[   11.168234] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[   11.169733] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   11.170416] usb usb2: Product: EHCI Host Controller
[   11.172115] usb usb2: Manufacturer: Linux 3.8.11-voyage ehci_hcd
[   11.173144] usb usb2: SerialNumber: 0000:00:0f.5
[   11.186958] hub 2-0:1.0: USB hub found
[   11.191933] hub 2-0:1.0: 4 ports detected
[   11.272629] input: PC Speaker as /devices/platform/pcspkr/input/input0
[   11.764744] cfg80211: Calling CRDA to update world regulatory domain
[   12.915269] Error: Driver 'pcspkr' is already registered, aborting...
[   12.960770] ath5k 0000:00:0c.0: registered as 'phy0'
[   14.022768] cfg80211: World regulatory domain updated:
[   14.024231] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   14.024765] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.026008] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.027250] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.028492] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.028739] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.059709] ath: EEPROM regdomain: 0x61
[   14.059725] ath: EEPROM indicates we should expect a direct regpair map
[   14.059750] ath: Country alpha2 being used: 00
[   14.059763] ath: Regpair used: 0x61
[   14.151466] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   14.152993] ath5k: phy0: Atheros AR5212 chip found (MAC: 0x56, PHY: 0x41)
[   14.154380] ath5k: phy0: RF5111 5GHz radio found (0x17)
[   14.155076] ath5k: phy0: RF2111 2GHz radio found (0x23)
[   15.160212] EXT2-fs (hda1): warning: mounting unchecked fs, running e2fsck is recommended
[   15.988988] cs5535-mfgpt cs5535-mfgpt: registered timer 0
[   23.079235] NET: Registered protocol family 10
[   87.700578] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[  111.290164] EXT2-fs (hda1): warning: mounting unchecked fs, running e2fsck is recommended