blob: f844d267b4abf6eee787fa6b7c11d898c501fdbb [file] [log] [blame]
[ 0.000000] Linux version 4.9.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2 (2017-06-12)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.0-3-amd64 root=UUID=a994a1c5-a911-48bd-a468-4aa6a9728001 ro quiet iomem=relaxed
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000c0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fb28fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fb29000-0x000000007fbfffff] type 16
[ 0.000000] BIOS-e820: [mem 0x000000007fc00000-0x000000008fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 7470AE7/7470AE7, BIOS CBET4000 4.6-608-g083504b66b 06/30/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x270000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 07FC00000 mask FFFC00000 uncachable
[ 0.000000] 1 base 080000000 mask FC0000000 uncachable
[ 0.000000] 2 base 0C0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 0D0000000 mask FF0000000 write-combining
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x7fb29 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f0710-0x000f071f] mapped at [ffff97ff800f0710]
[ 0.000000] Base memory trampoline at [ffff97ff80099000] 99000 size 24576
[ 0.000000] BRK [0x2a92e000, 0x2a92efff] PGTABLE
[ 0.000000] BRK [0x2a92f000, 0x2a92ffff] PGTABLE
[ 0.000000] BRK [0x2a930000, 0x2a930fff] PGTABLE
[ 0.000000] BRK [0x2a931000, 0x2a931fff] PGTABLE
[ 0.000000] BRK [0x2a932000, 0x2a932fff] PGTABLE
[ 0.000000] BRK [0x2a933000, 0x2a933fff] PGTABLE
[ 0.000000] BRK [0x2a934000, 0x2a934fff] PGTABLE
[ 0.000000] BRK [0x2a935000, 0x2a935fff] PGTABLE
[ 0.000000] BRK [0x2a936000, 0x2a936fff] PGTABLE
[ 0.000000] BRK [0x2a937000, 0x2a937fff] PGTABLE
[ 0.000000] BRK [0x2a938000, 0x2a938fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3584f000-0x36c1efff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F08B0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x000000007FB3A0E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x000000007FB3D710 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x000000007FB3A280 003486 (v03 COREv4 COREBOOT 20090419 INTL 20161222)
[ 0.000000] ACPI: FACS 0x000000007FB3A240 000040
[ 0.000000] ACPI: SSDT 0x000000007FB3D810 0005A0 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x000000007FB3DDB0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x000000007FB3DDF0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x000000007FB3DE30 000068 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DMAR 0x000000007FB3DEA0 000078 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x000000007FB3DF20 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000026fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x26fff9000-0x26fffdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000026fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007fb28fff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000026fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000026fffffff]
[ 0.000000] On node 0 totalpages: 2030280
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8109 pages used for memmap
[ 0.000000] DMA32 zone: 518953 pages, LIFO batch:31
[ 0.000000] Normal zone: 23552 pages used for memmap
[ 0.000000] Normal zone: 1507328 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x0000000080000000-0x000000008fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7fb29000-0x7fbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7fc00000-0x8fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
[ 0.000000] e820: [mem 0x90000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff9801efc00000 s103512 r8192 d31656 u1048576
[ 0.000000] pcpu-alloc: s103512 r8192 d31656 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1998533
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-3-amd64 root=UUID=a994a1c5-a911-48bd-a468-4aa6a9728001 ro quiet iomem=relaxed
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7891856K/8121120K available (6187K kernel code, 1137K rwdata, 2856K rodata, 1392K init, 688K bss, 229264K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[ 0.000000] NR_IRQS:33024 nr_irqs:440 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1866.824 MHz processor
[ 0.004014] Calibrating delay loop (skipped), value calculated using timer frequency.. 3733.64 BogoMIPS (lpj=7467296)
[ 0.004018] pid_max: default: 32768 minimum: 301
[ 0.004044] ACPI: Core revision 20160831
[ 0.010772] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.010858] Security Framework initialized
[ 0.010861] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.010870] AppArmor: AppArmor disabled by boot time parameter
[ 0.011739] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.016166] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.018282] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.018298] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.018873] CPU: Physical Processor ID: 0
[ 0.018875] CPU: Processor Core ID: 0
[ 0.018877] mce: CPU supports 6 MCE banks
[ 0.018887] CPU0: Thermal monitoring enabled (TM2)
[ 0.018893] process: using mwait in idle threads
[ 0.018899] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.018900] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.019396] Freeing SMP alternatives memory: 24K (ffffffffbbe7a000 - ffffffffbbe80000)
[ 0.024026] ftrace: allocating 25177 entries in 99 pages
[ 0.036118] smpboot: Max logical packages: 1
[ 0.036124] DMAR: Host address width 36
[ 0.036126] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.036138] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020e30260 ecap 1000
[ 0.036140] DMAR: DRHD base: 0x000000fed91000 flags: 0x0
[ 0.036147] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c0000020630260 ecap 1000
[ 0.036148] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[ 0.036154] DMAR: dmar2: reg_base_addr fed93000 ver 1:0 cap c9008020630260 ecap 1000
[ 0.036532] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.080000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz (family: 0x6, model: 0x17, stepping: 0x6)
[ 0.080000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.080000] ... version: 2
[ 0.080000] ... bit width: 40
[ 0.080000] ... generic registers: 2
[ 0.080000] ... value mask: 000000ffffffffff
[ 0.080000] ... max period: 000000007fffffff
[ 0.080000] ... fixed-purpose events: 3
[ 0.080000] ... event mask: 0000000700000003
[ 0.080000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.080000] x86: Booting SMP configuration:
[ 0.080000] .... node #0, CPUs: #1
[ 0.158031] x86: Booted up 1 node, 2 CPUs
[ 0.158031] smpboot: Total of 2 processors activated (7467.11 BogoMIPS)
[ 0.160474] devtmpfs: initialized
[ 0.160474] x86/mm: Memory block size: 128MB
[ 0.168004] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.168004] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.168004] pinctrl core: initialized pinctrl subsystem
[ 0.168004] NET: Registered protocol family 16
[ 0.180006] cpuidle: using governor ladder
[ 0.192004] cpuidle: using governor menu
[ 0.192043] ACPI: bus type PCI registered
[ 0.192045] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.192153] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.192156] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.192168] PCI: Using configuration type 1 for base access
[ 0.204060] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.204082] ACPI: Added _OSI(Module Device)
[ 0.204083] ACPI: Added _OSI(Processor Device)
[ 0.204085] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.204086] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.204321] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.208358] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.209803] ACPI : EC: EC started
[ 0.209804] ACPI : EC: interrupt blocked
[ 0.209899] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.209902] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.209904] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.209905] ACPI: Interpreter enabled
[ 0.209931] ACPI: (supports S0 S3 S4 S5)
[ 0.209932] ACPI: Using IOAPIC for interrupt routing
[ 0.209966] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.223718] acpi ACPI0003:01: ACPI dock station (docks/bays count: 1)
[ 0.224226] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.224232] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.224305] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.224318] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.224391] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c67ff])
[ 0.224704] PCI host bridge to bus 0000:00
[ 0.224707] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.224709] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.224711] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.224713] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.224715] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.224718] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.224720] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.224722] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.224724] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.224726] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.224728] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.224730] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.224732] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.224735] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.224737] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.224739] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfebfffff window]
[ 0.224741] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.224744] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.224755] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.224783] DMAR: Forcing write-buffer flush capability
[ 0.224784] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.224927] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.224942] pci 0000:00:02.0: reg 0x10: [mem 0xe1400000-0xe17fffff 64bit]
[ 0.224951] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.224957] pci 0000:00:02.0: reg 0x20: [io 0x3400-0x3407]
[ 0.225111] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.225124] pci 0000:00:02.1: reg 0x10: [mem 0xe1800000-0xe18fffff 64bit]
[ 0.225325] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000
[ 0.225349] pci 0000:00:19.0: reg 0x10: [mem 0xe1b00000-0xe1b1ffff]
[ 0.225361] pci 0000:00:19.0: reg 0x14: [mem 0xe1b24000-0xe1b24fff]
[ 0.225373] pci 0000:00:19.0: reg 0x18: [io 0x3000-0x301f]
[ 0.225467] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.225603] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.225662] pci 0000:00:1a.0: reg 0x20: [io 0x3020-0x303f]
[ 0.225809] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.225883] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.225943] pci 0000:00:1a.1: reg 0x20: [io 0x3040-0x305f]
[ 0.226089] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.226163] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.226223] pci 0000:00:1a.2: reg 0x20: [io 0x3060-0x307f]
[ 0.226368] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.226451] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.226474] pci 0000:00:1a.7: reg 0x10: [mem 0xe1b26000-0xe1b263ff]
[ 0.226588] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.226669] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.226748] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.226773] pci 0000:00:1b.0: reg 0x10: [mem 0xe1b20000-0xe1b23fff 64bit]
[ 0.226887] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.226973] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.227049] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.227155] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.227312] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.227425] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.227583] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.227696] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.227857] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[ 0.227970] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.228137] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.228197] pci 0000:00:1d.0: reg 0x20: [io 0x3080-0x309f]
[ 0.228345] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.228419] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.228480] pci 0000:00:1d.1: reg 0x20: [io 0x30a0-0x30bf]
[ 0.228625] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.228701] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.228760] pci 0000:00:1d.2: reg 0x20: [io 0x30c0-0x30df]
[ 0.228904] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.228988] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.229013] pci 0000:00:1d.7: reg 0x10: [mem 0xe1b27000-0xe1b273ff]
[ 0.229126] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.229203] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.229276] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.229474] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[ 0.229753] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.229778] pci 0000:00:1f.2: reg 0x10: [io 0x3408-0x340f]
[ 0.229790] pci 0000:00:1f.2: reg 0x14: [io 0x3418-0x341b]
[ 0.229802] pci 0000:00:1f.2: reg 0x18: [io 0x3410-0x3417]
[ 0.229814] pci 0000:00:1f.2: reg 0x1c: [io 0x341c-0x341f]
[ 0.229826] pci 0000:00:1f.2: reg 0x20: [io 0x30e0-0x30ff]
[ 0.229838] pci 0000:00:1f.2: reg 0x24: [mem 0xe1b25000-0xe1b257ff]
[ 0.229908] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.230052] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.230076] pci 0000:00:1f.3: reg 0x10: [mem 0xe1b28000-0xe1b280ff 64bit]
[ 0.230108] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.230336] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.230457] pci 0000:02:00.0: [168c:0030] type 00 class 0x028000
[ 0.230515] pci 0000:02:00.0: reg 0x10: [mem 0xe1900000-0xe191ffff 64bit]
[ 0.230625] pci 0000:02:00.0: reg 0x30: [mem 0xe1920000-0xe192ffff pref]
[ 0.230778] pci 0000:02:00.0: supports D1
[ 0.230780] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.240028] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.240037] pci 0000:00:1c.1: bridge window [mem 0xe1900000-0xe19fffff]
[ 0.240154] pci 0000:03:00.0: [168c:0030] type 00 class 0x028000
[ 0.240210] pci 0000:03:00.0: reg 0x10: [mem 0xe1a00000-0xe1a1ffff 64bit]
[ 0.240326] pci 0000:03:00.0: reg 0x30: [mem 0xe1a20000-0xe1a2ffff pref]
[ 0.240478] pci 0000:03:00.0: supports D1
[ 0.240480] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.252027] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.252035] pci 0000:00:1c.2: bridge window [mem 0xe1a00000-0xe1afffff]
[ 0.252160] acpiphp: Slot [1] registered
[ 0.252200] pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.252246] pci 0000:04:00.0: reg 0x10: [mem 0xe0800000-0xe0807fff 64bit]
[ 0.252472] pci 0000:04:00.0: PME# supported from D3hot
[ 0.264023] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.264029] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.264034] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe08fffff]
[ 0.264042] pci 0000:00:1c.3: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.264233] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.264248] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.264250] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.264252] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.264255] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[ 0.264257] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[ 0.264259] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
[ 0.264261] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.264264] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.264266] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.264268] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.264271] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.264273] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.264275] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[ 0.264278] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[ 0.264280] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[ 0.264282] pci 0000:00:1e.0: bridge window [mem 0x90000000-0xfebfffff window] (subtractive decode)
[ 0.264285] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[ 0.264496] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.264585] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.264671] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.264756] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.264841] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.264926] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.265012] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.265097] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.267309] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.267473] ACPI : EC: interrupt unblocked
[ 0.267483] ACPI : EC: event unblocked
[ 0.267492] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.267494] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.267637] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.267637] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.267637] vgaarb: loaded
[ 0.267637] vgaarb: bridge control possible 0000:00:02.0
[ 0.267637] PCI: Using ACPI for IRQ routing
[ 0.268245] PCI: pci_cache_line_size set to 64 bytes
[ 0.268352] e820: reserve RAM buffer [mem 0x7fb29000-0x7fffffff]
[ 0.268534] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.268534] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.268534] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.272028] clocksource: Switched to clocksource hpet
[ 0.284297] VFS: Disk quotas dquot_6.6.0
[ 0.284338] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.284478] pnp: PnP ACPI init
[ 0.284666] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.284669] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.284672] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.284674] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.284677] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.284680] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.284683] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.284685] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.284691] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.285441] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.285446] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.285535] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.285538] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.285540] system 00:02: [io 0x0580-0x05bf] has been reserved
[ 0.285544] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.285593] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.285660] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.285717] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.285879] pnp: PnP ACPI: found 6 devices
[ 0.294047] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.294109] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.294127] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.294134] pci 0000:00:1c.1: bridge window [mem 0xe1900000-0xe19fffff]
[ 0.294145] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.294151] pci 0000:00:1c.2: bridge window [mem 0xe1a00000-0xe1afffff]
[ 0.294162] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.294166] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.294172] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe08fffff]
[ 0.294177] pci 0000:00:1c.3: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.294186] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.294202] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.294204] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.294206] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.294209] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.294211] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 0.294213] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[ 0.294215] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.294217] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.294219] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.294222] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.294224] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.294226] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.294228] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.294230] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.294232] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.294234] pci_bus 0000:00: resource 19 [mem 0x90000000-0xfebfffff window]
[ 0.294236] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 0.294239] pci_bus 0000:02: resource 1 [mem 0xe1900000-0xe19fffff]
[ 0.294242] pci_bus 0000:03: resource 1 [mem 0xe1a00000-0xe1afffff]
[ 0.294244] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.294246] pci_bus 0000:04: resource 1 [mem 0xe0000000-0xe08fffff]
[ 0.294248] pci_bus 0000:04: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.294251] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.294253] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.294255] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.294257] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.294259] pci_bus 0000:05: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 0.294261] pci_bus 0000:05: resource 9 [mem 0x000cc000-0x000cffff window]
[ 0.294264] pci_bus 0000:05: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.294266] pci_bus 0000:05: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.294268] pci_bus 0000:05: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.294270] pci_bus 0000:05: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.294272] pci_bus 0000:05: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.294274] pci_bus 0000:05: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.294276] pci_bus 0000:05: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.294279] pci_bus 0000:05: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.294281] pci_bus 0000:05: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.294283] pci_bus 0000:05: resource 19 [mem 0x90000000-0xfebfffff window]
[ 0.294285] pci_bus 0000:05: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 0.294427] NET: Registered protocol family 2
[ 0.294710] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.295009] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.295471] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.295529] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.295596] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.295713] NET: Registered protocol family 1
[ 0.295734] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.298363] PCI: CLS 64 bytes, default 64
[ 0.298430] Unpacking initramfs...
[ 0.883564] Freeing initrd memory: 20288K (ffff97ffb584f000 - ffff97ffb6c1f000)
[ 0.883680] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.883684] software IO TLB [mem 0x7bb29000-0x7fb29000] (64MB) mapped at [ffff97fffbb29000-ffff97ffffb28fff]
[ 0.884323] audit: initializing netlink subsys (disabled)
[ 0.884359] audit: type=2000 audit(1499269660.884:1): initialized
[ 0.884989] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.885027] zbud: loaded
[ 0.886053] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.886100] io scheduler noop registered
[ 0.886101] io scheduler deadline registered
[ 0.886128] io scheduler cfq registered (default)
[ 0.887436] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.887442] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[ 0.887478] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.887480] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.887485] pcie_pme 0000:00:1c.1:pcie001: service driver pcie_pme loaded
[ 0.887513] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.887515] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.887520] pcie_pme 0000:00:1c.2:pcie001: service driver pcie_pme loaded
[ 0.887549] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.887552] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.887557] pcie_pme 0000:00:1c.3:pcie001: service driver pcie_pme loaded
[ 0.887574] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.887584] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.887607] efifb: probing for efifb
[ 0.887625] efifb: framebuffer at 0xd0000000, using 5120k, total 5120k
[ 0.887627] efifb: mode is 1440x900x32, linelength=5760, pages=1
[ 0.887628] efifb: scrolling: redraw
[ 0.887630] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.892361] Console: switching to colour frame buffer device 180x56
[ 0.896857] fb0: EFI VGA frame buffer device
[ 0.896945] intel_idle: does not run on family 6 model 23
[ 0.905267] Monitor-Mwait will be used to enter C-1 state
[ 0.905280] Monitor-Mwait will be used to enter C-2 state
[ 0.905291] Monitor-Mwait will be used to enter C-3 state
[ 0.905302] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.905695] GHES: HEST is not enabled!
[ 0.905825] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.906605] Linux agpgart interface v0.103
[ 0.906822] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.906823] AMD IOMMUv2 functionality not available on this system
[ 0.907137] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.918884] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.918890] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.919157] mousedev: PS/2 mouse device common for all mice
[ 0.919224] rtc_cmos 00:03: RTC can wake from S4
[ 0.919436] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.919468] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.919523] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.919823] NET: Registered protocol family 10
[ 0.920162] mip6: Mobile IPv6
[ 0.920165] NET: Registered protocol family 17
[ 0.920168] mpls_gso: MPLS GSO support
[ 0.920438] microcode: sig=0x10676, pf=0x80, revision=0x0
[ 0.920502] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.920768] registered taskstats version 1
[ 0.920789] zswap: loaded using pool lzo/zbud
[ 0.920937] ima: No TPM chip found, activating TPM-bypass!
[ 0.921464] rtc_cmos 00:03: setting system clock to 2017-07-05 15:47:41 UTC (1499269661)
[ 0.921515] PM: Hibernation image not present or could not be loaded.
[ 0.923643] Freeing unused kernel memory: 1392K (ffffffffbbd1e000 - ffffffffbbe7a000)
[ 0.923645] Write protecting the kernel read-only data: 12288k
[ 0.924648] Freeing unused kernel memory: 1988K (ffff97ffaa00f000 - ffff97ffaa200000)
[ 0.926175] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.929390] Freeing unused kernel memory: 1240K (ffff97ffaa4ca000 - ffff97ffaa600000)
[ 0.938486] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.090737] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.090879] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.090896] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.090916] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.092226] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.092283] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.095339] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.095474] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.095499] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.096236] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.150063] pps_core: LinuxPPS API ver. 1 registered
[ 1.150065] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.150205] ACPI: bus type USB registered
[ 1.150244] usbcore: registered new interface driver usbfs
[ 1.150262] usbcore: registered new interface driver hub
[ 1.150311] usbcore: registered new device driver usb
[ 1.150999] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.151437] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.151665] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.151675] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.151687] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 1.151728] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00003020
[ 1.152311] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.152314] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.152316] usb usb1: Product: UHCI Host Controller
[ 1.152319] usb usb1: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[ 1.152320] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.152532] hub 1-0:1.0: USB hub found
[ 1.152542] hub 1-0:1.0: 2 ports detected
[ 1.152857] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.152865] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 1.152873] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 1.152907] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00003040
[ 1.152975] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.152978] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.152980] usb usb2: Product: UHCI Host Controller
[ 1.152982] usb usb2: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[ 1.152984] usb usb2: SerialNumber: 0000:00:1a.1
[ 1.153158] hub 2-0:1.0: USB hub found
[ 1.153167] hub 2-0:1.0: 2 ports detected
[ 1.153473] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.153481] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 1.153491] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 1.153523] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00003060
[ 1.153589] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.153592] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.153594] usb usb3: Product: UHCI Host Controller
[ 1.153596] usb usb3: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[ 1.153598] usb usb3: SerialNumber: 0000:00:1a.2
[ 1.154755] hub 3-0:1.0: USB hub found
[ 1.154767] hub 3-0:1.0: 2 ports detected
[ 1.155760] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.155768] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.155777] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.155801] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080
[ 1.155870] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.155873] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.155875] usb usb4: Product: UHCI Host Controller
[ 1.155877] usb usb4: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[ 1.155879] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.156315] hub 4-0:1.0: USB hub found
[ 1.156325] hub 4-0:1.0: 2 ports detected
[ 1.156648] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.156657] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 1.156666] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.156689] ehci-pci: EHCI PCI platform driver
[ 1.156691] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000030a0
[ 1.156954] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.156957] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.156959] usb usb5: Product: UHCI Host Controller
[ 1.156961] usb usb5: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[ 1.156963] usb usb5: SerialNumber: 0000:00:1d.1
[ 1.157148] hub 5-0:1.0: USB hub found
[ 1.157157] hub 5-0:1.0: 2 ports detected
[ 1.157604] PTP clock support registered
[ 1.157811] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.157822] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 1.157832] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.157857] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000030c0
[ 1.157944] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.157947] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.157949] usb usb6: Product: UHCI Host Controller
[ 1.157951] usb usb6: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[ 1.157953] usb usb6: SerialNumber: 0000:00:1d.2
[ 1.158140] hub 6-0:1.0: USB hub found
[ 1.158150] hub 6-0:1.0: 2 ports detected
[ 1.158937] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 1.158945] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 7
[ 1.158959] ehci-pci 0000:00:1a.7: debug port 1
[ 1.159423] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.159424] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.162870] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 1.164121] ehci-pci 0000:00:1a.7: irq 18, io mem 0xe1b26000
[ 1.175735] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.175737] ACPI: Thermal Zone [THM0] (61 C)
[ 1.180102] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.180175] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.180178] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.180180] usb usb7: Product: EHCI Host Controller
[ 1.180182] usb usb7: Manufacturer: Linux 4.9.0-3-amd64 ehci_hcd
[ 1.180184] usb usb7: SerialNumber: 0000:00:1a.7
[ 1.180390] hub 7-0:1.0: USB hub found
[ 1.180401] hub 7-0:1.0: 6 ports detected
[ 1.182614] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.182616] ACPI: Thermal Zone [THM1] (49 C)
[ 1.183427] SCSI subsystem initialized
[ 1.186525] libata version 3.00 loaded.
[ 1.208162] hub 1-0:1.0: USB hub found
[ 1.208175] hub 1-0:1.0: 2 ports detected
[ 1.236175] hub 2-0:1.0: USB hub found
[ 1.236188] hub 2-0:1.0: 2 ports detected
[ 1.264145] hub 3-0:1.0: USB hub found
[ 1.264158] hub 3-0:1.0: 2 ports detected
[ 1.264476] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.264486] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8
[ 1.274506] xhci_hcd 0000:04:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[ 1.274731] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.274734] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.274736] usb usb8: Product: xHCI Host Controller
[ 1.274738] usb usb8: Manufacturer: Linux 4.9.0-3-amd64 xhci-hcd
[ 1.274740] usb usb8: SerialNumber: 0000:04:00.0
[ 1.274974] hub 8-0:1.0: USB hub found
[ 1.274989] hub 8-0:1.0: 2 ports detected
[ 1.275173] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.275178] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 9
[ 1.275208] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.275237] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.275240] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.275242] usb usb9: Product: xHCI Host Controller
[ 1.275244] usb usb9: Manufacturer: Linux 4.9.0-3-amd64 xhci-hcd
[ 1.275246] usb usb9: SerialNumber: 0000:04:00.0
[ 1.275467] hub 9-0:1.0: USB hub found
[ 1.275481] hub 9-0:1.0: 2 ports detected
[ 1.356285] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.356294] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 10
[ 1.356310] ehci-pci 0000:00:1d.7: debug port 1
[ 1.360224] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.360231] ehci-pci 0000:00:1d.7: irq 16, io mem 0xe1b27000
[ 1.376090] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.376142] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.376145] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.376147] usb usb10: Product: EHCI Host Controller
[ 1.376150] usb usb10: Manufacturer: Linux 4.9.0-3-amd64 ehci_hcd
[ 1.376152] usb usb10: SerialNumber: 0000:00:1d.7
[ 1.376375] hub 10-0:1.0: USB hub found
[ 1.376385] hub 10-0:1.0: 6 ports detected
[ 1.404103] hub 4-0:1.0: USB hub found
[ 1.404112] hub 4-0:1.0: 2 ports detected
[ 1.432136] hub 5-0:1.0: USB hub found
[ 1.432145] hub 5-0:1.0: 2 ports detected
[ 1.460120] hub 6-0:1.0: USB hub found
[ 1.460129] hub 6-0:1.0: 2 ports detected
[ 1.460443] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.494931] random: fast init done
[ 1.662675] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:16:18:ee:48
[ 1.662678] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.662706] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
[ 1.662902] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.663891] ahci 0000:00:1f.2: version 3.0
[ 1.664128] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.664158] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 1.664161] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ccc
[ 1.665045] scsi host0: ahci
[ 1.665281] scsi host1: ahci
[ 1.665463] scsi host2: ahci
[ 1.665647] scsi host3: ahci
[ 1.665743] ata1: SATA max UDMA/133 abar m2048@0xe1b25000 port 0xe1b25100 irq 32
[ 1.665746] ata2: SATA max UDMA/133 abar m2048@0xe1b25000 port 0xe1b25180 irq 32
[ 1.665748] ata3: DUMMY
[ 1.665749] ata4: DUMMY
[ 1.704048] usb 2-2: new full-speed USB device number 2 using uhci_hcd
[ 1.884026] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x35d1805da15, max_idle_ns: 881590793498 ns
[ 1.886160] usb 2-2: New USB device found, idVendor=0a5c, idProduct=21e6
[ 1.886162] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.886165] usb 2-2: Product: BCM20702A0
[ 1.886167] usb 2-2: Manufacturer: Broadcom Corp
[ 1.886169] usb 2-2: SerialNumber: 2CD05A7FAEEC
[ 1.979732] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.982079] ata1.00: NCQ Send/Recv Log not supported
[ 1.982081] ata1.00: ATA-9: SAMSUNG MZMTE512HMHP-000MV, EXT42M0Q, max UDMA/133
[ 1.982083] ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.982726] ata1.00: NCQ Send/Recv Log not supported
[ 1.982783] ata1.00: configured for UDMA/133
[ 1.983023] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZMTE512 2M0Q PQ: 0 ANSI: 5
[ 2.038765] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 2.056413] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input2
[ 2.327871] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.331971] ata2.00: ATAPI: HL-DT-ST DVDRW GS22N, CP06, max UDMA/133
[ 2.336794] ata2.00: configured for UDMA/133
[ 2.342232] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRW GS22N CP06 PQ: 0 ANSI: 5
[ 2.357532] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
[ 2.357632] sd 0:0:0:0: [sda] Write Protect is off
[ 2.357636] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.357681] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.361281] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10
[ 2.363113] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.371141] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
[ 2.371142] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.371325] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.400040] usb 7-5: new high-speed USB device number 3 using ehci-pci
[ 2.548452] usb 7-5: New USB device found, idVendor=0424, idProduct=2514
[ 2.548455] usb 7-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.548737] hub 7-5:1.0: USB hub found
[ 2.548800] hub 7-5:1.0: 4 ports detected
[ 2.699226] md: linear personality registered for level -1
[ 2.702210] md: multipath personality registered for level -4
[ 2.704030] md: raid0 personality registered for level 0
[ 2.706039] md: raid1 personality registered for level 1
[ 2.804019] raid6: sse2x1 gen() 2572 MB/s
[ 2.872015] raid6: sse2x1 xor() 2702 MB/s
[ 2.940018] raid6: sse2x2 gen() 3420 MB/s
[ 3.008010] raid6: sse2x2 xor() 3330 MB/s
[ 3.076009] raid6: sse2x4 gen() 4664 MB/s
[ 3.144016] raid6: sse2x4 xor() 3763 MB/s
[ 3.144018] raid6: using algorithm sse2x4 gen() 4664 MB/s
[ 3.144019] raid6: .... xor() 3763 MB/s, rmw enabled
[ 3.144020] raid6: using ssse3x2 recovery algorithm
[ 3.144306] xor: measuring software checksum speed
[ 3.184009] prefetch64-sse: 6374.000 MB/sec
[ 3.224008] generic_sse: 5677.000 MB/sec
[ 3.224010] xor: using function: prefetch64-sse (6374.000 MB/sec)
[ 3.224289] async_tx: api initialized (async)
[ 3.227964] md: raid6 personality registered for level 6
[ 3.227966] md: raid5 personality registered for level 5
[ 3.227968] md: raid4 personality registered for level 4
[ 3.234250] md: raid10 personality registered for level 10
[ 3.282687] Btrfs loaded, crc32c=crc32c-generic
[ 3.520947] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 3.649808] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.656674] systemd[1]: systemd 233 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN default-hierarchy=hybrid)
[ 3.656841] systemd[1]: Detected architecture x86-64.
[ 3.657037] systemd[1]: Set hostname to <universi-if9ee1>.
[ 3.818907] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.819052] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.819171] systemd[1]: Listening on Journal Audit Socket.
[ 3.819235] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.819268] systemd[1]: Reached target System Time Synchronized.
[ 3.819292] systemd[1]: Reached target Swap.
[ 3.819318] systemd[1]: Reached target Libvirt guests shutdown.
[ 3.874182] RPC: Registered named UNIX socket transport module.
[ 3.874183] RPC: Registered udp transport module.
[ 3.874183] RPC: Registered tcp transport module.
[ 3.874184] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.881000] EXT4-fs (sda4): re-mounted. Opts: discard,user_xattr,errors=remount-ro
[ 3.897801] lp: driver loaded but no devices found
[ 3.905962] ppdev: user-space parallel port driver
[ 3.956837] drbd: initialized. Version: 8.4.7 (api:1/proto:86-101)
[ 3.956840] drbd: srcversion: 0904DF2CCF7283ACE07D07A
[ 3.956841] drbd: registered as block device major 147
[ 4.183276] ACPI: AC Adapter [AC] (on-line)
[ 4.185282] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.187234] acpi device:04: registered as cooling_device2
[ 4.187332] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 4.214515] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input4
[ 4.214520] ACPI: Sleep Button [SLPB]
[ 4.215232] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input5
[ 4.215241] ACPI: Lid Switch [LID]
[ 4.215325] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 4.215328] ACPI: Power Button [PWRF]
[ 4.232155] ACPI: Battery Slot [BAT0] (battery present)
[ 4.232353] ACPI: Battery Slot [BAT1] (battery absent)
[ 4.238341] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.269929] [drm] Initialized
[ 4.277015] Non-volatile memory driver v1.3
[ 4.282223] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 4.282224] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 4.282226] thinkpad_acpi: ThinkPad BIOS CBET4000 4.6-608-g083504b66b, EC 7XHT25WW-3.6
[ 4.282227] thinkpad_acpi: Lenovo ThinkPad X200s, model 7470AE7
[ 4.297098] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 4.297118] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 4.297119] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 4.313086] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 4.313360] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 4.316352] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[ 4.318240] ath: phy0: Killer Wireless card detected
[ 4.324081] pci 0000:00:00.0: Intel GM45 Chipset
[ 4.324104] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 4.325890] pci 0000:00:00.0: detected 262144K stolen memory
[ 4.325926] [drm] Memory usable by graphics device = 2048M
[ 4.325930] checking generic (d0000000 500000) vs hw (d0000000 10000000)
[ 4.325931] fb: switching to inteldrmfb from EFI VGA
[ 4.325998] Console: switching to colour dummy device 80x25
[ 4.328078] [drm] Replacing VGA console driver
[ 4.328333] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.328334] [drm] Driver supports precise vblank timestamp query.
[ 4.328339] i915 0000:00:02.0: Invalid PCI ROM data signature: expecting 0x52494350, got 0xe934aa55
[ 4.328346] [drm] failed to find VBIOS tables
[ 4.328642] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.342345] ath: phy0: ASPM enabled: 0x43
[ 4.342348] ath: EEPROM regdomain: 0x60
[ 4.342349] ath: EEPROM indicates we should expect a direct regpair map
[ 4.342351] ath: Country alpha2 being used: 00
[ 4.342352] ath: Regpair used: 0x60
[ 4.359107] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.359448] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffab55817e0000, irq=17
[ 4.369481] ath: phy1: ASPM enabled: 0x43
[ 4.369484] ath: EEPROM regdomain: 0x6a
[ 4.369485] ath: EEPROM indicates we should expect a direct regpair map
[ 4.369487] ath: Country alpha2 being used: 00
[ 4.369488] ath: Regpair used: 0x6a
[ 4.371983] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 4.372887] ieee80211 phy1: Atheros AR9300 Rev:3 mem=0xffffab5581000000, irq=18
[ 4.512123] [drm] RC6 disabled, disabling runtime PM support
[ 4.512831] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 4.523810] snd_hda_codec_conexant hdaudioC0D0: CX20561 (Hermosa): BIOS auto-probing.
[ 4.526300] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20160831/utaddress-247)
[ 4.526306] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.526309] ACPI Warning: SystemIO range 0x00000000000005B0-0x00000000000005BF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20160831/utaddress-247)
[ 4.526313] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.526314] ACPI Warning: SystemIO range 0x0000000000000580-0x00000000000005AF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20160831/utaddress-247)
[ 4.526317] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.526318] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.526654] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20561 (Hermosa): line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
[ 4.526656] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.526658] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x19/0x16/0x0/0x0/0x0)
[ 4.526660] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 4.526661] snd_hda_codec_conexant hdaudioC0D0: dig-out=0x1c/0x0
[ 4.526663] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 4.526665] snd_hda_codec_conexant hdaudioC0D0: Mic=0x18
[ 4.526667] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1d
[ 4.526668] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x17
[ 4.530387] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ 4.536963] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.537361] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.537406] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.537451] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.537494] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 4.574514] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.574558] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.763526] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[ 4.772813] EXT4-fs (sda3): mounted filesystem without journal. Opts: discard,user_xattr
[ 4.794813] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 4.821158] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 4.824885] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 4.825299] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 4.825305] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 4.861302] systemd-journald[236]: Received request to flush runtime journal from PID 1
[ 4.868405] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 4.880703] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 4.923852] input: PC Speaker as /devices/platform/pcspkr/input/input13
[ 4.982301] intel_powerclamp: No package C-state available
[ 5.209960] random: crng init done
[ 5.229495] iTCO_vendor_support: vendor-support=0
[ 5.230074] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 5.230129] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0560)
[ 5.230371] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.501647] Bluetooth: Core ver 2.22
[ 5.502072] NET: Registered protocol family 31
[ 5.502073] Bluetooth: HCI device and connection manager initialized
[ 5.502077] Bluetooth: HCI socket layer initialized
[ 5.502080] Bluetooth: L2CAP socket layer initialized
[ 5.502088] Bluetooth: SCO socket layer initialized
[ 5.545924] usbcore: registered new interface driver btusb
[ 5.565177] Bluetooth: hci0: BCM: chip id 63
[ 5.597159] Bluetooth: hci0: universi-if9ee1
[ 5.599160] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 5.603326] bluetooth hci0: firmware: failed to load brcm/BCM20702A1-0a5c-21e6.hcd (-2)
[ 5.603335] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
[ 5.603339] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
[ 5.671733] nfc: nfc_init: NFC Core ver 0.1
[ 5.672738] NET: Registered protocol family 39
[ 5.830500] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.830502] Bluetooth: BNEP filters: protocol multicast
[ 5.830507] Bluetooth: BNEP socket layer initialized
[ 6.348910] fbcon: inteldrmfb (fb0) is primary device
[ 7.336443] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 7.384639] Ebtables v2.0 registered
[ 7.907747] Console: switching to colour frame buffer device 180x56
[ 9.959041] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 14.242984] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.456285] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.474160] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 14.484846] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 14.500919] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 14.511511] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 14.520532] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 14.534128] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 15.282695] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 15.297497] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.071137] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.135302] wlan0: authenticate with f8:1a:67:5a:c4:75
[ 19.145927] wlan0: send auth to f8:1a:67:5a:c4:75 (try 1/3)
[ 19.148487] wlan0: authenticated
[ 19.152024] wlan0: associate with f8:1a:67:5a:c4:75 (try 1/3)
[ 19.153642] wlan0: RX AssocResp from f8:1a:67:5a:c4:75 (capab=0x11 status=0 aid=1)
[ 19.153756] wlan0: associated
[ 19.153804] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 19.212329] ath: EEPROM regdomain: 0x809c
[ 19.212331] ath: EEPROM indicates we should expect a country code
[ 19.212332] ath: doing EEPROM country->regdmn map search
[ 19.212333] ath: country maps to regdmn code: 0x52
[ 19.212335] ath: Country alpha2 being used: CN
[ 19.212335] ath: Regpair used: 0x52
[ 19.212337] ath: regdomain 0x809c dynamically updated by country IE
[ 19.212364] ath: EEPROM regdomain: 0x809c
[ 19.212365] ath: EEPROM indicates we should expect a country code
[ 19.212366] ath: doing EEPROM country->regdmn map search
[ 19.212367] ath: country maps to regdmn code: 0x52
[ 19.212368] ath: Country alpha2 being used: CN
[ 19.212369] ath: Regpair used: 0x52
[ 19.212370] ath: regdomain 0x809c dynamically updated by country IE
[ 21.380495] thinkpad_ec: loading out-of-tree module taints kernel.
[ 21.381000] thinkpad_ec: thinkpad_ec 0.42 loaded.
[ 21.381993] tp_smapi 0.42 loading...
[ 21.382001] SMAPI not supported (ID=0x67)
[ 21.382005] tp_smapi init failed (ret=-6)!
[ 21.475524] tp_smapi 0.42 loading...
[ 21.475533] SMAPI not supported (ID=0x67)
[ 21.475537] tp_smapi init failed (ret=-6)!
[ 23.324049] Bluetooth: RFCOMM TTY layer initialized
[ 23.324056] Bluetooth: RFCOMM socket layer initialized
[ 23.324063] Bluetooth: RFCOMM ver 1.11