

coreboot-4.4-1882-g5b6bdcc Mon Oct 17 13:09:42 UTC 2016 romstage starting...
Disabling Watchdog reboot... done.
SMBus controller enabled.
Setting up static northbridge registers... done.
Initializing Graphics...
Back from haswell_early_initialization()
CPU id(40651) ucode:0000001c Intel(R) Celeron(R) 2955U @ 1.40GHz
AES NOT supported, TXT NOT supported, VT supported
PCH type: LP Mainstream, device id: 9c45, rev id 4
SPD index 1
CBFS: 'Master Header Locator' located CBFS at [400100:7fffc0)
CBFS: Locating 'spd.bin'
CBFS: Found @ offset db00 size 700
Starting UEFI PEI System Agent
CBFS: 'Master Header Locator' located CBFS at [400100:7fffc0)
CBFS: Locating 'mrc.cache'
CBFS: Found @ offset fec0 size 10000
find_current_mrc_cache_local: picked entry 0 from cache block
prepare_mrc_cache: at ffc10010, size fe0 checksum a5ef
CBFS: 'Master Header Locator' located CBFS at [400100:7fffc0)
CBFS: Locating 'mrc.bin'
CBFS: Found @ offset 39fec0 size 2e6e4
System Agent: Starting up...
System Agent: Initializing PCH
install_ppi: overwrite GUID {ed097352-9041-445a-80b6-b29d509e8845}
install_ppi: overwrite GUID {908c7f8b-5c48-47fb-8357-f5fd4e235276}
System Agent: Initializing PCH (SMBUS)
System Agent: Initializing PCH (USB)
System Agent: Initializing PCH (SA Init)
System Agent: Initializing PCH (Me UMA)
System Agent: Initializing Memory
Copy SPD for Channel 0 Dimm 0
Copy SPD for Channel 1 Dimm 0
System Agent: Done.
Sanity checking heap.
System Agent Version 1.6.1 Build 2
memcfg DDR3 clock 1600 MHz
memcfg channel assignment: A: 0, B  1, C  2
memcfg channel[0] config (00780008):
   ECC inactive
   enhanced interleave mode on
   rank interleave on
   DIMMA 2048 MB width x16 single rank, selected
   DIMMB 0 MB width x16 single rank
memcfg channel[1] config (00780008):
   ECC inactive
   enhanced interleave mode on
   rank interleave on
   DIMMA 2048 MB width x16 single rank, selected
   DIMMB 0 MB width x16 single rank
ME: FW Partition Table      : OK
ME: Bringup Loader Failure  : NO
ME: Firmware Init Complete  : NO
ME: Manufacturing Mode      : NO
ME: Boot Options Present    : NO
ME: Update In Progress      : NO
ME: Current Working State   : Normal
ME: Current Operation State : M0 with UMA
ME: Current Operation Mode  : Normal
ME: Error Code              : No Error
ME: Progress Phase          : BUP Phase
ME: Power Management Event  : Clean Moff->Mx wake
ME: Progress Phase State    : M0 kernel load
CBMEM:
IMD: root @ 7f7ff000 254 entries.
IMD: root @ 7f7fec00 62 entries.
Relocate MRC DATA from ff7d0304 to 7f7dd000 (4064 bytes)
CBFS: 'Master Header Locator' located CBFS at [400100:7fffc0)
CBFS: Locating 'fallback/ramstage'
CBFS: Found @ offset 2a380 size 15f23
Decompressing stage fallback/ramstage @ 0x7f798fc0 (256720 bytes)
Loading module at 7f799000 with entry 7f799000. filesize: 0x2db90 memsize: 0x3ea90
Processing 3128 relocs. Offset value of 0x7f699000
SeaBIOS (version rel-1.9.3-0-ge2fc41e)
BUILD: gcc: (coreboot toolchain v1.43 August 31st, 2016) 5.3.0 binutils: (GNU Binutils) 2.26.1
Found coreboot cbmem console @ 7f7de000
Found mainboard GOOGLE Peppy
Relocating init from 0x000e5480 to 0x7f6bfbc0 (size 45984)
Found CBFS header at 0xffc00138
multiboot: eax=7f7c6200, ebx=7f7c61b4
Found 15 PCI devices (max PCI bus is 01)
Copying SMBIOS entry point from 0x7f70b000 to 0x000f0800
Copying ACPI RSDP from 0x7f71c000 to 0x000f07d0
Using pmtimer, ioport 0x1008
Scan for VGA option rom
Running option rom at c000:0003
pmm call arg1=0
Turning on vga text mode console
SeaBIOS (version rel-1.9.3-0-ge2fc41e)
XHCI init on dev 00:14.0: regs @ 0xe0500000, 13 ports, 32 slots, 32 byte contexts
XHCI    protocol USB  2.00, 8 ports (offset 1), def 3018
XHCI    protocol USB  3.00, 4 ports (offset 10), def 1000
XHCI    extcap 0xc1 @ e0508040
XHCI    extcap 0xc0 @ e0508070
XHCI    extcap 0x1 @ e0508460
XHCI    extcap 0xa @ e0508480
EHCI init on dev 00:1d.0 (regs=0xe0520020)
Found 0 lpt ports
Found 0 serial ports
AHCI controller at 1f.2, iobase e051f000, irq 10
Searching bootorder for: /rom@img/memtest
Searching bootorder for: /rom@img/nvramcui
Searching bootorder for: /rom@img/coreinfo
Searching bootorder for: /pci@i0cf8/*@1f,2/drive@0/disk@0
AHCI/0: registering: "AHCI/0: KINGSTON SNS4151S332G ATA-10 Hard-Disk (30533 MiBytes)"
PS2 keyboard initialized
XHCI no devices found
Initialized USB HUB (0 ports used)
All threads complete.
Scan for option roms

Press ESC for boot menu.

Select boot device:

1. AHCI/0: KINGSTON SNS4151S332G ATA-10 Hard-Disk (30533 MiByt
2. Payload [memtest]
3. Payload [nvramcui]
4. Payload [coreinfo]

Searching bootorder for: HALT
drive 0x000f0760: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=62533296
Space available for UMB: c7800-ec800, f0000-f0760
Returned 188416 bytes of ZoneHigh
e820 map has 9 items:
  0: 0000000000000000 - 000000000009fc00 = 1 RAM
  1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
  2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
  3: 0000000000100000 - 000000007f6f9000 = 1 RAM
  4: 000000007f6f9000 - 0000000082200000 = 2 RESERVED
  5: 00000000f0000000 - 00000000f4000000 = 2 RESERVED
  6: 00000000fed10000 - 00000000fed1a000 = 2 RESERVED
  7: 00000000fed84000 - 00000000fed85000 = 2 RESERVED
  8: 0000000100000000 - 000000017ce00000 = 1 RAM
enter handle_19:
  NULL
Booting from Hard Disk...
Booting from 0000:7c00