[    0.375042] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.375043] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
[    0.375045] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
[    0.375047] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.375545] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.375547] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.375587] system 00:02: [io  0x0500-0x057f] could not be reserved
[    0.375589] system 00:02: [io  0x0480-0x04bf] has been reserved
[    0.375591] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.375616] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.375653] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.375685] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.375697] pnp: PnP ACPI: found 6 devices
[    0.380289] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.380291] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[    0.380295] pci 0000:00:1c.3: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.380296] pci 0000:00:1c.3: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.380306] pci 0000:00:1c.3: BAR 9: assigned [mem 0xc2a00000-0xc2bfffff 64bit pref]
[    0.380308] pci 0000:00:1c.3: BAR 7: assigned [io  0x2000-0x2fff]
[    0.380310] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.380316] pci 0000:00:1c.0:   bridge window [mem 0xe0400000-0xe04fffff]
[    0.380324] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.380335] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.380339] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.380345] pci 0000:00:1c.3:   bridge window [mem 0xe0500000-0xe05fffff]
[    0.380350] pci 0000:00:1c.3:   bridge window [mem 0xc2a00000-0xc2bfffff 64bit pref]
[    0.380359] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.380360] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.380361] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.380363] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.380364] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff]
[    0.380365] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff]
[    0.380367] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[    0.380368] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[    0.380369] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[    0.380370] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[    0.380371] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[    0.380373] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[    0.380374] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[    0.380375] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[    0.380376] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff]
[    0.380377] pci_bus 0000:00: resource 19 [mem 0xc2a00000-0xfebfffff]
[    0.380379] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff]
[    0.380380] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff]
[    0.380382] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.380383] pci_bus 0000:03: resource 1 [mem 0xe0500000-0xe05fffff]
[    0.380384] pci_bus 0000:03: resource 2 [mem 0xc2a00000-0xc2bfffff 64bit pref]
[    0.380403] NET: Registered protocol family 2
[    0.380527] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.380619] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.380790] TCP: Hash tables configured (established 65536 bind 65536)
[    0.380809] TCP: reno registered
[    0.380812] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.380835] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.380894] NET: Registered protocol family 1
[    0.380903] pci 0000:00:02.0: Video device with shadowed ROM
[    0.381216] PCI: CLS 64 bytes, default 64
[    0.381255] Unpacking initramfs...
[    0.786585] Freeing initrd memory: 4080K (ffff8800377f8000 - ffff880037bf4000)
[    0.786589] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.786591] software IO TLB [mem 0xbbea8000-0xbfea8000] (64MB) mapped at [ffff8800bbea8000-ffff8800bfea7fff]
[    0.787003] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.792007] AVX version of gcm_enc/dec engaged.
[    0.792909] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    0.793809] sha1_ssse3: Using AVX optimized SHA-1 implementation
[    0.793906] alg: No test for crc32 (crc32-pclmul)
[    0.793915] sha256_ssse3: Using AVX optimized SHA-256 implementation
[    0.794074] sha512_ssse3: Using AVX optimized SHA-512 implementation
[    0.799119] AVX2 or AES-NI instructions are not detected.
[    0.799122] AVX2 instructions are not detected.
[    0.799309] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.799328] audit: initializing netlink subsys (disabled)
[    0.799345] audit: type=2000 audit(1413634795.790:1): initialized
[    0.801118] zpool: loaded
[    0.801119] zbud: loaded
[    0.801268] VFS: Disk quotas dquot_6.5.2
[    0.801301] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.801666] fuse init (API version 7.23)
[    0.801798] msgmni has been set to 15781
[    0.805358] alg: No test for crc32 (crc32-table)
[    0.805489] alg: No test for lz4 (lz4-generic)
[    0.805527] alg: No test for lz4hc (lz4hc-generic)
[    0.805565] alg: No test for stdrng (krng)
[    0.809282] NET: Registered protocol family 38
[    0.809322] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.809358] io scheduler noop registered
[    0.809359] io scheduler deadline registered
[    0.809388] io scheduler cfq registered (default)
[    0.809581] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.809718] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[    0.809791] pcieport 0000:00:1c.3: enabling device (0106 -> 0107)
[    0.809871] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
[    0.810021] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.810023] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.810028] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.810045] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.810049] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.810071] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.810072] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.810073] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
[    0.810074] pci 0000:03:00.2: Signaling PME through PCIe PME interrupt
[    0.810075] pci 0000:03:00.3: Signaling PME through PCIe PME interrupt
[    0.810080] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.810152] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.810657] Non-volatile memory driver v1.3
[    0.810739] Linux agpgart interface v0.103
[    0.810901] intel_idle: MWAIT substates: 0x21120
[    0.810902] intel_idle: v0.4 model 0x2A
[    0.810902] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.811358] ACPI: AC Adapter [AC] (on-line)
[    0.811478] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/PNP0C09:00/PNP0C0E:00/input/input0
[    0.811497] ACPI: Sleep Button [SLPB]
[    0.811566] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/PNP0C09:00/PNP0C0D:00/input/input1
[    0.811665] ACPI: Lid Switch [LID]
[    0.811709] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.811711] ACPI: Power Button [PWRF]
[    0.812810] thermal LNXTHERM:00: registered as thermal_zone0
[    0.812811] ACPI: Thermal Zone [THM0] (55 C)
[    0.813469] thermal LNXTHERM:01: registered as thermal_zone1
[    0.813470] ACPI: Thermal Zone [THM1] (27 C)
[    0.813518] ioatdma: Intel(R) QuickData Technology Driver 4.00
[    0.813587] [drm] Initialized drm 1.1.0 20060810
[    0.814164] [drm] Memory usable by graphics device = 2048M
[    0.814165] [drm] Replacing VGA console driver
[    0.814670] Console: switching to colour dummy device 80x25
[    0.824515] ACPI: Battery Slot [BAT0] (battery present)
[    0.824633] ACPI: Battery Slot [BAT1] (battery absent)
[    0.893485] i915 0000:00:02.0: irq 27 for MSI/MSI-X
[    0.893492] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.893492] [drm] Driver supports precise vblank timestamp query.
[    0.893495] [drm] failed to find VBIOS tables
[    0.893549] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    0.945110] fbcon: inteldrmfb (fb0) is primary device
[    1.668107] Console: switching to colour frame buffer device 200x56
[    1.671064] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.671066] i915 0000:00:02.0: registered panic notifier
[    1.674959] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.714839] acpi device:06: registered as cooling_device4
[    1.714906] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    1.714951] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
[    1.715849] loop: module loaded
[    1.716030] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\PMIO) (20140724/utaddress-258)
[    1.716036] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.716039] ACPI Warning: SystemIO range 0x00000000000004c0-0x00000000000004cf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140724/utaddress-258)
[    1.716042] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.716043] ACPI Warning: SystemIO range 0x00000000000004b0-0x00000000000004bf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140724/utaddress-258)
[    1.716045] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.716046] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004af conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140724/utaddress-258)
[    1.716048] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.716049] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    1.716116] SCSI Media Changer driver v0.25 
[    1.716149] ahci 0000:00:1f.2: version 3.0
[    1.716250] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[    1.716271] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.734609] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1f impl SATA mode
[    1.734612] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    1.735316] scsi host0: ahci
[    1.735459] scsi host1: ahci
[    1.735563] scsi host2: ahci
[    1.735670] scsi host3: ahci
[    1.735774] scsi host4: ahci
[    1.735884] scsi host5: ahci
[    1.735965] ata1: SATA max UDMA/133 abar m2048@0xe0626000 port 0xe0626100 irq 28
[    1.735969] ata2: SATA max UDMA/133 abar m2048@0xe0626000 port 0xe0626180 irq 28
[    1.735972] ata3: SATA max UDMA/133 abar m2048@0xe0626000 port 0xe0626200 irq 28
[    1.735975] ata4: SATA max UDMA/133 abar m2048@0xe0626000 port 0xe0626280 irq 28
[    1.735978] ata5: SATA max UDMA/133 abar m2048@0xe0626000 port 0xe0626300 irq 28
[    1.735980] ata6: DUMMY
[    1.736033] Intel(R) Wireless WiFi driver for Linux, in-tree:
[    1.736033] Copyright(c) 2003- 2014 Intel Corporation
[    1.736432] iwlwifi 0000:01:00.0: irq 29 for MSI/MSI-X
[    1.736531] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2
[    1.736539] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2
[    1.736546] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-6000-4.ucode failed with error -2
[    1.736548] iwlwifi 0000:01:00.0: request for firmware file 'iwlwifi-6000-4.ucode' failed.
[    1.736579] iwlwifi 0000:01:00.0: no suitable firmware found!
[    1.736835] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.736836] ehci-pci: EHCI PCI platform driver
[    1.736922] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.736928] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.736941] ehci-pci 0000:00:1a.0: debug port 2
[    1.740851] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.740864] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe0626800
[    1.754623] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.754663] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.754664] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.754666] usb usb1: Product: EHCI Host Controller
[    1.754667] usb usb1: Manufacturer: Linux 3.17.1-gentoo ehci_hcd
[    1.754668] usb usb1: SerialNumber: 0000:00:1a.0
[    1.754807] hub 1-0:1.0: USB hub found
[    1.754815] hub 1-0:1.0: 3 ports detected
[    1.755037] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.755042] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.755053] ehci-pci 0000:00:1d.0: debug port 2
[    1.758942] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.758955] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe0626c00
[    1.774635] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.774667] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.774669] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.774670] usb usb2: Product: EHCI Host Controller
[    1.774671] usb usb2: Manufacturer: Linux 3.17.1-gentoo ehci_hcd
[    1.774672] usb usb2: SerialNumber: 0000:00:1d.0
[    1.774815] hub 2-0:1.0: USB hub found
[    1.774821] hub 2-0:1.0: 3 ports detected
[    1.774990] ehci-platform: EHCI generic platform driver
[    1.774999] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.775002] ohci-pci: OHCI PCI platform driver
[    1.775012] ohci-platform: OHCI generic platform driver
[    1.775019] uhci_hcd: USB Universal Host Controller Interface driver
[    1.775065] usbcore: registered new interface driver usb-storage
[    1.775105] usbcore: registered new interface driver usbserial
[    1.775119] usbcore: registered new interface driver usbserial_generic
[    1.775131] usbserial: USB Serial support registered for generic
[    1.775144] usbcore: registered new interface driver cp210x
[    1.775158] usbserial: USB Serial support registered for cp210x
[    1.775175] usbcore: registered new interface driver ftdi_sio
[    1.775187] usbserial: USB Serial support registered for FTDI USB Serial Device
[    1.775217] usbcore: registered new interface driver usb_serial_simple
[    1.775229] usbserial: USB Serial support registered for zio
[    1.775239] usbserial: USB Serial support registered for funsoft
[    1.775251] usbserial: USB Serial support registered for flashloader
[    1.775263] usbserial: USB Serial support registered for vivopay
[    1.775274] usbserial: USB Serial support registered for moto_modem
[    1.775285] usbserial: USB Serial support registered for hp4x
[    1.775297] usbserial: USB Serial support registered for suunto
[    1.775309] usbserial: USB Serial support registered for siemens_mpi
[    1.775322] usbcore: registered new interface driver ti_usb_3410_5052
[    1.775334] usbserial: USB Serial support registered for TI USB 3410 1 port adapter
[    1.775347] usbserial: USB Serial support registered for TI USB 5052 2 port adapter
[    1.775398] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.780849] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.780885] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.781059] mousedev: PS/2 mouse device common for all mice
[    1.781362] rtc_cmos 00:03: RTC can wake from S4
[    1.781512] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.781548] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.781562] i2c /dev entries driver
[    1.782071] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.782126] Intel P-state driver initializing.
[    1.782307] hidraw: raw HID events driver (C) Jiri Kosina
[    1.782562] usbcore: registered new interface driver usbhid
[    1.782566] usbhid: USB HID core driver
[    1.783647] Netfilter messages via NETLINK v0.30.
[    1.783664] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
[    1.783780] ipip: IPv4 over IPv4 tunneling driver
[    1.784174] TCP: cubic registered
[    1.784183] Initializing XFRM netlink socket
[    1.784680] tsc: Refined TSC clocksource calibration: 2691.262 MHz
[    1.784701] snd_hda_intel 0000:00:1b.0: irq 29 for MSI/MSI-X
[    1.784747] NET: Registered protocol family 10
[    1.784938] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.785150] mip6: Mobile IPv6
[    1.785400] ip6_gre: GRE over IPv6 tunneling driver
[    1.785632] NET: Registered protocol family 17
[    1.785642] NET: Registered protocol family 15
[    1.786766] registered taskstats version 1
[    1.787517] rtc_cmos 00:03: setting system clock to 2014-10-18 12:19:57 UTC (1413634797)
[    1.787530] ALSA device list:
[    1.787531]   No soundcards found.
[    1.793981] sound hdaudioC0D0: CX20590: BIOS auto-probing.
[    1.794520] sound hdaudioC0D0: autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[    1.794525] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    1.794530] sound hdaudioC0D0:    hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[    1.794534] sound hdaudioC0D0:    mono: mono_out=0x0
[    1.794537] sound hdaudioC0D0:    inputs:
[    1.794543] sound hdaudioC0D0:      Mic=0x1b
[    1.794548] sound hdaudioC0D0:      Internal Mic=0x23
[    1.794552] sound hdaudioC0D0:      Dock Mic=0x1a
[    1.795958] sound hdaudioC0D0: Enable sync_write for stable communication
[    1.799698] thinkpad_acpi: Thinkpad ACPI has no SSMS interface.
[    1.801840] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    1.801986] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    1.802138] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    1.802287] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    1.802436] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    1.802633] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    1.802806] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    2.075136] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.085131] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.087209] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[    2.087216] ata1.00: ATA-9: Samsung SSD 840 EVO 500GB, EXT0BB0Q, max UDMA/133
[    2.087221] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.087554] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[    2.087565] ata1.00: configured for UDMA/133
[    2.105632] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 840  BB0Q PQ: 0 ANSI: 5
[    2.106437] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.106503] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.106723] sd 0:0:0:0: [sda] Write Protect is off
[    2.106733] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.106813] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.107893]  sda: sda1 sda2
[    2.108930] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.226043] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.226051] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.226760] hub 1-1:1.0: USB hub found
[    2.226964] hub 1-1:1.0: 6 ports detected
[    2.345526] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.455664] ata2: SATA link down (SStatus 0 SControl 300)
[    2.496394] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.496400] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.497109] hub 2-1:1.0: USB hub found
[    2.497180] hub 2-1:1.0: 8 ports detected
[    2.575984] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[    2.687630] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016
[    2.687639] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.687643] usb 1-1.3: Product: Biometric Coprocessor
[    2.687647] usb 1-1.3: Manufacturer: UPEK
[    2.766236] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[    2.786336] Switched to clocksource tsc
[    2.826141] ata3: SATA link down (SStatus 0 SControl 300)
[    2.837269] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 578367
[    2.837284] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    2.881637] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[    2.881644] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.881649] usb 1-1.4: Product: Broadcom Bluetooth Device
[    2.881653] usb 1-1.4: Manufacturer: Broadcom Corp
[    2.881656] usb 1-1.4: SerialNumber: EC55F9FD938E
[    2.899182] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    3.176626] ata4: SATA link down (SStatus 0 SControl 300)
[    3.527074] ata5: SATA link down (SStatus 0 SControl 300)
[    3.530043] Freeing unused kernel memory: 876K (ffffffff81eac000 - ffffffff81f87000)
[    3.530049] Write protecting the kernel read-only data: 14336k
[    3.543692] Freeing unused kernel memory: 2004K (ffff88000180b000 - ffff880001a00000)
[    3.554886] Freeing unused kernel memory: 1696K (ffff880001c58000 - ffff880001e00000)
[    3.809979] systemd-udevd[1753]: starting version 216
[    3.810182] random: systemd-udevd urandom read with 25 bits of entropy available
[    8.752320] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    9.070946] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input14
[   60.151886] random: nonblocking pool is initialized
[   83.194128] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[   83.729754] systemd[1]: [/usr/lib64/systemd/system/rtkit-daemon.service:27] Unknown lvalue 'ControlGroup' in section 'Service'
[   83.764967] systemd[1]: Cannot add dependency job for unit udisks2.service, ignoring: Unit udisks2.service failed to load: No such file or directory.
[   83.816044] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[   83.822679] Adding 16777212k swap on /dev/mapper/linux-swap.  Priority:-1 extents:1 across:16777212k SSFS
[   83.908220] EXT4-fs (dm-1): re-mounted. Opts: (null)
[   84.115447] systemd-udevd[3170]: starting version 216
[   84.164166] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[   84.168174] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
[   84.184148] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[   84.187572] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[   84.202487] systemd-journald[2488]: Received request to flush runtime journal from PID 1
[   84.590103] pps_core: LinuxPPS API ver. 1 registered
[   84.590106] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[   84.590821] PTP clock support registered
[   84.591568] thinkpad_acpi: Thinkpad ACPI has no SSMS interface.
[   84.603005] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[   84.603007] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[   84.604036] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[   84.604054] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
[   84.636259] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[   84.639302] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[   84.639327] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
[   84.639487] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
[   84.639550] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   84.816215] e1000e 0000:00:19.0 eth0: registered PHC clock
[   84.816219] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:53:54:52
[   84.816221] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[   84.816280] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[   84.946202] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[   85.006033] systemd-udevd[3201]: renamed network interface eth0 to enp0s25
[   85.236389] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
[   85.346407] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
[   85.346555] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[  109.776367] traps: notification-da[3456] trap int3 ip:7f74245544b5 sp:7fffd4b79650 error:0
[  459.011283] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[  459.011296] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[  459.011345] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[  464.818707] e1000e: enp0s25 NIC Link is Down
[  484.148007] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[  484.148020] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO