[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
[    0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt 
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.1-774-g285111f-dirty 10/17/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000F8000000 mask FFFFFC000000 write-combining
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000180000000 aka 6144M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
[    0.000000]  [mem 0x17fe00000-0x17fffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
[    0.000000]  [mem 0x17c000000-0x17fdfffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
[    0.000000]  [mem 0x100000000-0x17bffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0xbfdfffff] page 2M
[    0.000000]  [mem 0xbfe00000-0xbff9afff] page 4k
[    0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000BFFB68D0 000074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000BFFB4280 002644 (v02 ASUS   COREBOOT 00000001 INTL 20150204)
[    0.000000] ACPI: FACS 0x00000000BFFB4240 000040
[    0.000000] ACPI: SSDT 0x00000000BFFB69D0 000E57 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: TCPA 0x00000000BFFB7830 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x00000000BFFB7870 0000C6 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000BFFB7940 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000BFFB7AB8 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000BFFB7AF0 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000BFFB7B30 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000BFFB7CA8 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xbfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
[    0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=3
[    0.000000] NUMA: node 2 [mem 0x00100000-0xbfffffff] overlaps with node 0 [mem 0x00100000-0xbfffffff]
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of physical nodes 2
[    0.000000] Node 0 MemBase 0000000000000000 Limit 0000000140000000
[    0.000000] Node 1 MemBase 0000000140000000 Limit 0000000180000000
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[    0.000000]   NODE_DATA [mem 0x13fffb000-0x13fffffff]
[    0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
[    0.000000]   NODE_DATA [mem 0x17fff9000-0x17fffdfff]
[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
[    0.000000]  [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x17fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xbff9afff]
[    0.000000]   node   0: [mem 0x100000000-0x13fffffff]
[    0.000000]   node   1: [mem 0x140000000-0x17fffffff]
[    0.000000] On node 0 totalpages: 1048377
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10695 pages used for memmap
[    0.000000]   DMA32 zone: 782235 pages, LIFO batch:31
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] On node 1 totalpages: 262144
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
[    0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 
[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1292581
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt 
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xb5fa000000-0xb5fbffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[    0.000000] Memory: 5017492K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224592K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1909.674 MHz processor
[    0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.34 BogoMIPS (lpj=7638696)
[    0.010795] pid_max: default: 32768 minimum: 301
[    0.015450] ACPI: Core revision 20140424
[    0.021822] ACPI: All ACPI Tables successfully acquired
[    0.027179] Security Framework initialized
[    0.031306] AppArmor: AppArmor disabled by boot time parameter
[    0.037141] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.044881] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.058133] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.067916] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.074816] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.082670] Initializing cgroup subsys memory
[    0.087046] Initializing cgroup subsys devices
[    0.091506] Initializing cgroup subsys freezer
[    0.095969] Initializing cgroup subsys net_cls
[    0.100427] Initializing cgroup subsys blkio
[    0.104714] Initializing cgroup subsys perf_event
[    0.109423] Initializing cgroup subsys net_prio
[    0.114002] tseg: 0000000000
[    0.114016] CPU: Physical Processor ID: 0
[    0.118035] CPU: Processor Core ID: 0
[    0.121722] mce: CPU supports 6 MCE banks
[    0.125753] LVT offset 0 assigned for vector 0xf9
[    0.130481] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.145822] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
[    0.154827] ftrace: allocating 21601 entries in 85 pages
[    0.170235] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.215749] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
[    0.332519] Performance Events: AMD PMU driver.
[    0.337097] ... version:                0
[    0.341111] ... bit width:              48
[    0.345209] ... generic registers:      4
[    0.349220] ... value mask:             0000ffffffffffff
[    0.354529] ... max period:             00007fffffffffff
[    0.359840] ... fixed-purpose events:   0
[    0.363869] ... event mask:             000000000000000f
[    0.371791] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.379995] x86: Booting SMP configuration:
[    0.384189] .... node  #0, CPUs:      #1 #2 #3
[    0.428528] .... node  #1, CPUs:   #4 #5 #6 #7
[    0.581176] x86: Booted up 2 nodes, 8 CPUs
[    0.585480] smpboot: Total of 8 processors activated (30556.58 BogoMIPS)
[    0.598062] devtmpfs: initialized
[    0.609965] pinctrl core: initialized pinctrl subsystem
[    0.615356] NET: Registered protocol family 16
[    0.620017] cpuidle: using governor ladder
[    0.624122] cpuidle: using governor menu
[    0.628058] node 0 link 1: io port [1000, 3fff]
[    0.628062] TOM: 00000000c0000000 aka 3072M
[    0.632257] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
[    0.632261] node 0 link 1: mmio [fc000000, fc3fffff]
[    0.632264] node 0 link 1: mmio [f8000000, fbffffff]
[    0.632266] TOM2: 0000000180000000 aka 6144M
[    0.636545] bus: [bus 00-05] on node 0 link 1
[    0.636547] bus: 00 [io  0x0000-0xffff]
[    0.636548] bus: 00 [mem 0xd0000000-0xffffffff]
[    0.636550] bus: 00 [mem 0x180000000-0xfcffffffff]
[    0.636654] ACPI: bus type PCI registered
[    0.640667] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.647265] PCI: Using configuration type 1 for base access
[    0.652839] PCI: Using configuration type 1 for extended access
[    0.659370] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.665636] mtrr: probably your BIOS does not setup all CPUs.
[    0.671387] mtrr: corrected configuration.
[    0.685305] ACPI: Added _OSI(Module Device)
[    0.689499] ACPI: Added _OSI(Processor Device)
[    0.693949] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.698660] ACPI: Added _OSI(Processor Aggregator Device)
[    0.707701] ACPI: Interpreter enabled
[    0.711384] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.720649] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[    0.729904] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[    0.739184] ACPI: (supports S0 S1 S5)
[    0.742855] ACPI: Using IOAPIC for interrupt routing
[    0.747863] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.776807] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[    0.783001] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.791213] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.832054] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.842068] PCI host bridge to bus 0000:00
[    0.846172] pci_bus 0000:00: root bus resource [bus 00-05]
[    0.851661] pci_bus 0000:00: root bus resource [io  0x0d00-0x3fff]
[    0.857839] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.864717] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[    0.871588] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
[    0.878458] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.884649] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.884840] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[    0.884847] pci 0000:00:01.0: reg 0x10: [io  0x2c00-0x2c7f]
[    0.884976] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.884987] pci 0000:00:01.1: reg 0x10: [io  0x3000-0x301f]
[    0.885011] pci 0000:00:01.1: reg 0x20: [io  0x2c80-0x2cbf]
[    0.885030] pci 0000:00:01.1: reg 0x24: [io  0x2cc0-0x2cff]
[    0.885083] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.885195] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.885205] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
[    0.885232] pci 0000:00:02.0: supports D1 D2
[    0.885261] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.885344] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.891063] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.891078] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
[    0.891131] pci 0000:00:02.1: supports D1 D2
[    0.891138] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.891192] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.896920] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.896954] pci 0000:00:06.0: reg 0x20: [io  0x3020-0x302f]
[    0.896975] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.904112] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.910645] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.917782] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.924407] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.924418] pci 0000:00:07.0: reg 0x10: [io  0x3050-0x3057]
[    0.924422] pci 0000:00:07.0: reg 0x14: [io  0x3070-0x3073]
[    0.924427] pci 0000:00:07.0: reg 0x18: [io  0x3058-0x305f]
[    0.924432] pci 0000:00:07.0: reg 0x1c: [io  0x3074-0x3077]
[    0.924436] pci 0000:00:07.0: reg 0x20: [io  0x3030-0x303f]
[    0.924441] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
[    0.924583] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.924590] pci 0000:00:08.0: reg 0x10: [io  0x3060-0x3067]
[    0.924603] pci 0000:00:08.0: reg 0x14: [io  0x3078-0x307b]
[    0.924622] pci 0000:00:08.0: reg 0x18: [io  0x3068-0x306f]
[    0.924627] pci 0000:00:08.0: reg 0x1c: [io  0x307c-0x307f]
[    0.924642] pci 0000:00:08.0: reg 0x20: [io  0x3040-0x304f]
[    0.924665] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
[    0.924781] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[    0.924913] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.930630] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.930680] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.930730] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.936454] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.936507] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.936582] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.942299] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.942349] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.942400] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.948125] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.948174] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.948230] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.953967] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.954115] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.954223] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.954338] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.954469] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.954594] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[    0.954738] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[    0.954867] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[    0.954989] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[    0.955127] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[    0.955313] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[    0.955333] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.955342] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
[    0.955349] pci 0000:01:04.0: reg 0x18: [io  0x1000-0x107f]
[    0.955396] pci 0000:01:04.0: supports D1 D2
[    0.955514] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.960488] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    0.960492] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.960495] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    0.960610] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[    0.960649] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
[    0.960693] pci 0000:02:00.0: reg 0x30: [mem 0x21400000-0x2140ffff pref]
[    0.960768] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.960874] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.970873] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.975841] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.975941] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[    0.975968] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
[    0.976078] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.976180] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.986180] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.991149] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    0.991225] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.996277] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.001281] pci_bus 0000:00: on NUMA node 0
[    1.001388] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    1.007557] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    1.013711] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    1.021019] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    1.028314] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    1.035604] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[    1.042908] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    1.049057] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[    1.055203] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[    1.062498] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    1.069800] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    1.077102] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[    1.083239] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[    1.089411] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[    1.096708] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[    1.104014] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[    1.111323] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.119858] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[    1.126322] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[    1.132789] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[    1.139264] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[    1.145998] ACPI: Enabled 1 GPEs in block 00 to 1F
[    1.151114] vgaarb: setting as boot device: PCI:0000:01:04.0
[    1.156779] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[    1.164877] vgaarb: loaded
[    1.167591] vgaarb: bridge control possible 0000:01:04.0
[    1.173067] PCI: Using ACPI for IRQ routing
[    1.177264] PCI: pci_cache_line_size set to 64 bytes
[    1.177322] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.177325] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
[    1.177645] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.184698] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    1.189760] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    1.198436] Switched to clocksource hpet
[    1.214014] pnp: PnP ACPI init
[    1.217122] ACPI: bus type PNP registered
[    1.221693] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.221774] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.221874] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.221953] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.221992] pnp 00:04: [dma 2]
[    1.222038] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.222060] pnp: PnP ACPI: found 5 devices
[    1.226174] ACPI: bus type PNP unregistered
[    1.238200] pci 0000:02:00.0: can't claim BAR 6 [mem 0x21400000-0x2140ffff pref]: no compatible bridge window
[    1.248155] pci 0000:00:09.0: PCI bridge to [bus 01]
[    1.253132] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    1.259233] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    1.266023] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    1.273257] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
[    1.280482] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.285457] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    1.292251] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    1.297221] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    1.304016] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    1.308990] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.313965] pci_bus 0000:00: resource 4 [io  0x0d00-0x3fff]
[    1.313968] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[    1.313970] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
[    1.313973] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
[    1.313976] pci_bus 0000:00: resource 8 [io  0x0000-0x0cf7]
[    1.313979] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    1.313981] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[    1.313984] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[    1.313987] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
[    1.313989] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
[    1.314125] NET: Registered protocol family 2
[    1.318993] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.326689] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.334029] TCP: Hash tables configured (established 65536 bind 65536)
[    1.340643] TCP: reno registered
[    1.343899] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.350114] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.356901] NET: Registered protocol family 1
[    1.361656] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    1.367745] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.373647] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.379195] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.384693] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    1.390277] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.395817] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.401317] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    1.406900] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.412446] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.417957] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    1.423543] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.429101] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.434616] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    1.440201] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.445722] pci 0000:01:04.0: Video device with shadowed ROM
[    1.445730] PCI: CLS 64 bytes, default 64
[    1.445838] Unpacking initramfs...
[    1.678964] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
[    1.686802] PCI-DMA: Disabling AGP.
[    1.691875] PCI-DMA: aperture base @ b4000000 size 65536 KB
[    1.697460] PCI-DMA: using GART IOMMU.
[    1.701218] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.713258] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.721444] microcode: CPU0: patch_level=0x00000000
[    1.726335] microcode: CPU1: patch_level=0x00000000
[    1.731230] microcode: CPU2: patch_level=0x00000000
[    1.736132] microcode: CPU3: patch_level=0x00000000
[    1.741037] microcode: CPU4: patch_level=0x01000096
[    1.745935] microcode: CPU5: patch_level=0x00000000
[    1.750829] microcode: CPU6: patch_level=0x00000000
[    1.755724] microcode: CPU7: patch_level=0x00000000
[    1.760710] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.769510] LVT offset 1 assigned for vector 0x400
[    1.774326] IBS: LVT offset 1 assigned
[    1.778114] perf: AMD IBS detected (0x00000007)
[    1.783265] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.789657] audit: initializing netlink subsys (disabled)
[    1.795085] audit: type=2000 audit(1445068109.528:1): initialized
[    1.801960] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.808361] zbud: loaded
[    1.811245] VFS: Disk quotas dquot_6.5.2
[    1.815212] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.821758] msgmni has been set to 9945
[    1.826139] alg: No test for stdrng (krng)
[    1.830301] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.837798] io scheduler noop registered
[    1.841734] io scheduler deadline registered
[    1.846096] io scheduler cfq registered (default)
[    1.851018] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[    1.851141] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[    1.851266] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[    1.851390] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[    1.851553] aer 0000:00:0b.0:pcie02: service driver aer loaded
[    1.851581] aer 0000:00:0c.0:pcie02: service driver aer loaded
[    1.851607] aer 0000:00:0d.0:pcie02: service driver aer loaded
[    1.851633] aer 0000:00:0e.0:pcie02: service driver aer loaded
[    1.851653] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    1.858623] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.865159] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    1.865170] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    1.872132] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.878665] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    1.878676] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[    1.885639] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[    1.885649] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[    1.892614] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[    1.892645] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.898252] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.904990] GHES: HEST is not enabled!
[    1.908874] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.935463] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.963146] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.971082] Linux agpgart interface v0.103
[    1.975396] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[    1.985894] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.990887] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.996171] mousedev: PS/2 mouse device common for all mice
[    2.001846] rtc_cmos rtc_cmos: RTC can wake from S4
[    2.007055] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    2.013450] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    2.021312] ledtrig-cpu: registered to indicate activity on CPUs
[    2.027519] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.033965] AMD IOMMUv2 functionality not available on this system
[    2.040294] TCP: cubic registered
[    2.043754] NET: Registered protocol family 10
[    2.048626] mip6: Mobile IPv6
[    2.051619] NET: Registered protocol family 17
[    2.052156] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.064687] mpls_gso: MPLS GSO support
[    2.069288] registered taskstats version 1
[    2.074175] rtc_cmos rtc_cmos: setting system clock to 2015-10-17 07:48:31 UTC (1445068111)
[    2.082597] PM: Hibernation image not present or could not be loaded.
[    2.084394] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
[    2.092246] Write protecting the kernel read-only data: 8192k
[    2.101440] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
[    2.110030] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    2.134024] systemd-udevd[99]: starting version 215
[    2.139826] random: systemd-udevd urandom read with 4 bits of entropy available
[    2.171026] pps_core: LinuxPPS API ver. 1 registered
[    2.176007] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.185542] ACPI: bus type USB registered
[    2.189772] usbcore: registered new interface driver usbfs
[    2.189824] PTP clock support registered
[    2.199296] usbcore: registered new interface driver hub
[    2.204851] usbcore: registered new device driver usb
[    2.204942] tg3.c:v3.137 (May 11, 2014)
[    2.204954] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[    2.205160] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[    2.226188] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.233295] ehci-pci: EHCI PCI platform driver
[    2.238059] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.238098] ehci-pci 0000:00:02.1: EHCI Host Controller
[    2.238115] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    2.238136] ehci-pci 0000:00:02.1: debug port 1
[    2.238181] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    2.238210] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
[    2.250132] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.250193] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.250195] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.250196] usb usb1: Product: EHCI Host Controller
[    2.250198] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.250199] usb usb1: SerialNumber: 0000:00:02.1
[    2.250621] hub 1-0:1.0: USB hub found
[    2.250631] hub 1-0:1.0: 10 ports detected
[    2.311043] ohci-pci: OHCI PCI platform driver
[    2.315729] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    2.321324] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.328781] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
[    2.341299] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[    2.351565] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.361302] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.369132] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.375940] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[    2.381749] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[    2.392106] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.398902] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.406125] usb usb2: Product: OHCI PCI host controller
[    2.411359] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.417458] usb usb2: SerialNumber: 0000:00:02.0
[    2.422335] hub 2-0:1.0: USB hub found
[    2.426109] hub 2-0:1.0: 10 ports detected
[    2.470469] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[    2.480734] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.490468] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.498300] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.511800] FS-Cache: Loaded
[    2.518770] RPC: Registered named UNIX socket transport module.
[    2.525377] RPC: Registered udp transport module.
[    2.531464] RPC: Registered tcp transport module.
[    2.537554] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.550096] FS-Cache: Netfs 'nfs' registered for caching
[    2.565291] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[    2.610101] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    2.709936] tsc: Refined TSC clocksource calibration: 1909.786 MHz
[    3.713686] Switched to clocksource tsc
[    4.224458] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
[    4.230986] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[    4.237880] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   12.182722] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[   12.196402] systemd[1]: Detected architecture 'x86-64'.
[   15.677612] random: nonblocking pool is initialized
[   17.119315] systemd[1]: Inserted module 'autofs4'
[   17.158578] systemd[1]: Set hostname to <cb-test-tgt>.
[   26.040100] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[   26.052817] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[   26.068209] systemd[1]: Expecting device dev-ttyS0.device...
[   26.081995] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[   26.089799] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   26.097410] systemd[1]: Starting Remote File Systems (Pre).
[   26.113859] systemd[1]: Reached target Remote File Systems (Pre).
[   26.120000] systemd[1]: Starting Encrypted Volumes.
[   26.133849] systemd[1]: Reached target Encrypted Volumes.
[   26.139281] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[   26.147327] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   26.155261] systemd[1]: Starting Paths.
[   26.169927] systemd[1]: Reached target Paths.
[   26.174405] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[   26.197862] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   26.207280] systemd[1]: Starting Swap.
[   26.221924] systemd[1]: Reached target Swap.
[   26.226271] systemd[1]: Starting Root Slice.
[   26.237819] systemd[1]: Created slice Root Slice.
[   26.242549] systemd[1]: Starting User and Session Slice.
[   26.257830] systemd[1]: Created slice User and Session Slice.
[   26.263615] systemd[1]: Starting Delayed Shutdown Socket.
[   26.277814] systemd[1]: Listening on Delayed Shutdown Socket.
[   26.283587] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[   26.301796] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   26.308778] systemd[1]: Starting Journal Socket (/dev/log).
[   26.325797] systemd[1]: Listening on Journal Socket (/dev/log).
[   26.331764] systemd[1]: Starting udev Kernel Socket.
[   26.345795] systemd[1]: Listening on udev Kernel Socket.
[   26.351150] systemd[1]: Starting udev Control Socket.
[   26.365784] systemd[1]: Listening on udev Control Socket.
[   26.371215] systemd[1]: Starting Journal Socket.
[   26.385772] systemd[1]: Listening on Journal Socket.
[   26.390798] systemd[1]: Starting System Slice.
[   26.405763] systemd[1]: Created slice System Slice.
[   26.410676] systemd[1]: Starting system-getty.slice.
[   26.425758] systemd[1]: Created slice system-getty.slice.
[   26.431180] systemd[1]: Starting system-serial\x2dgetty.slice.
[   26.445753] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   26.452081] systemd[1]: Starting Increase datagram queue length...
[   26.470942] systemd[1]: Mounting Debug File System...
[   26.486688] systemd[1]: Mounting POSIX Message Queue File System...
[   26.627963] systemd[1]: Starting Load Kernel Modules...
[   26.760987] systemd[1]: Started Set Up Additional Binary Formats.
[   26.772347] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   26.795250] systemd[1]: Starting udev Coldplug all Devices...
[   26.811135] systemd[1]: Mounting Huge Pages File System...
[   26.827107] systemd[1]: Starting Slices.
[   26.841680] systemd[1]: Reached target Slices.
[   26.846366] systemd[1]: Starting Remount Root and Kernel File Systems...
[   29.064869] systemd[1]: Started Increase datagram queue length.
[   29.071279] systemd[1]: Starting Syslog Socket.
[   29.084905] systemd[1]: Listening on Syslog Socket.
[   29.089860] systemd[1]: Starting Sockets.
[   29.104872] systemd[1]: Reached target Sockets.
[   29.109492] systemd[1]: Starting Journal Service...
[   29.136895] systemd[1]: Started Journal Service.
[   35.127915] systemd-udevd[189]: starting version 215
[   37.030393] systemd-journald[172]: Received request to flush runtime journal from PID 1
[   48.825965] nfs: server 10.100.1.1 not responding, still trying
[   48.833005] nfs: server 10.100.1.1 not responding, still trying
[   48.840298] nfs: server 10.100.1.1 not responding, still trying
[   48.847629] nfs: server 10.100.1.1 not responding, still trying
[   48.853782] nfs: server 10.100.1.1 not responding, still trying
[   48.859720] nfs: server 10.100.1.1 not responding, still trying
[   48.865654] nfs: server 10.100.1.1 not responding, still trying
[   48.871585] nfs: server 10.100.1.1 not responding, still trying
[   48.973942] nfs: server 10.100.1.1 OK
[   48.983287] nfs: server 10.100.1.1 OK
[   48.992245] nfs: server 10.100.1.1 OK
[   49.081866] nfs: server 10.100.1.1 OK
[   49.115735] nfs: server 10.100.1.1 OK
[   49.144612] nfs: server 10.100.1.1 OK
[   49.165573] nfs: server 10.100.1.1 OK
[   49.222957] nfs: server 10.100.1.1 OK
[   53.098203] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[   53.106023] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[   53.164392] EDAC MC: Ver: 3.0.0
[   53.801774] MCE: In-kernel MCE decoding enabled.
[   53.945440] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   53.958090] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[   53.966474] ACPI: Power Button [PWRB]
[   53.970229] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   53.977632] ACPI: Power Button [PWRF]
[   54.259995] FDC 0 is a post-1991 82077
[   54.264151] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[   54.269435] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[   54.431611] AMD64 EDAC driver v3.4.0
[   54.435280] EDAC amd64: DRAM ECC enabled.
[   54.439311] EDAC amd64: F10h detected (node 0).
[   54.443866] EDAC MC: DCT0 chip selects:
[   54.443869] EDAC amd64: MC: 0:     0MB 1:     0MB
[   54.448579] EDAC amd64: MC: 2:     0MB 3:     0MB
[   54.453291] EDAC amd64: MC: 4:     0MB 5:     0MB
[   54.458004] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   54.462717] EDAC MC: DCT1 chip selects:
[   54.462719] EDAC amd64: MC: 0:     0MB 1:     0MB
[   54.467429] EDAC amd64: MC: 2:     0MB 3:     0MB
[   54.472144] EDAC amd64: MC: 4:     0MB 5:     0MB
[   54.476856] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   54.481568] EDAC amd64: using x4 syndromes.
[   54.485763] EDAC amd64: MCT channel count: 2
[   54.490075] EDAC amd64: CS6: Registered DDR2 RAM
[   54.494706] EDAC amd64: CS7: Registered DDR2 RAM
[   54.499544] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[   54.509263] EDAC amd64: DRAM ECC enabled.
[   54.513319] EDAC amd64: F10h detected (node 1).
[   54.517902] EDAC MC: DCT0 chip selects:
[   54.517904] EDAC amd64: MC: 0:  1024MB 1:     0MB
[   54.522620] EDAC amd64: MC: 2:     0MB 3:     0MB
[   54.527332] EDAC amd64: MC: 4:     0MB 5:     0MB
[   54.532046] EDAC amd64: MC: 6:     0MB 7:     0MB
[   54.536757] EDAC MC: DCT1 chip selects:
[   54.536759] EDAC amd64: MC: 0:     0MB 1:     0MB
[   54.541471] EDAC amd64: MC: 2:     0MB 3:     0MB
[   54.546183] EDAC amd64: MC: 4:     0MB 5:     0MB
[   54.550897] EDAC amd64: MC: 6:     0MB 7:     0MB
[   54.555609] EDAC amd64: using x4 syndromes.
[   54.559803] EDAC amd64: MCT channel count: 1
[   54.564118] EDAC amd64: CS0: Registered DDR2 RAM
[   54.568932] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
[   54.578650] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[   54.743031] SCSI subsystem initialized
[   54.814623] acpi-cpufreq: overriding BIOS provided _PSD data
[   55.158936] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   55.187154] libata version 3.00 loaded.
[   55.267164] pata_amd 0000:00:06.0: version 0.4.1
[   55.268240] scsi0 : pata_amd
[   55.271446] scsi1 : pata_amd
[   55.274459] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[   55.281432] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[   55.386628] sata_nv 0000:00:07.0: version 3.5
[   55.387003] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[   55.393585] scsi2 : sata_nv
[   55.396664] scsi3 : sata_nv
[   55.399562] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[   55.406713] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[   55.414137] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[   55.420428] scsi4 : sata_nv
[   55.423397] scsi5 : sata_nv
[   55.426274] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[   55.433416] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[   55.723590] ata3: SATA link down (SStatus 0 SControl 300)
[   55.751564] ata5: SATA link down (SStatus 0 SControl 300)
[   56.039493] ata4: SATA link down (SStatus 0 SControl 300)
[   56.355369] ata6: SATA link down (SStatus 0 SControl 300)
[   57.026188] kvm: Nested Virtualization enabled
[   57.031060] kvm: Nested Paging enabled
[   97.640628] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****