[    0.000000] Linux version 4.9.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170425 (Debian 6.3.0-16) ) #1 SMP Debian 4.9.25-1 (2017-05-02)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.0-3-amd64 root=UUID=a994a1c5-a911-48bd-a468-4aa6a9728001 ro quiet iomem=relaxed
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000c0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fb28fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007fb29000-0x000000007fbfffff] type 16
[    0.000000] BIOS-e820: [mem 0x000000007fc00000-0x000000008fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 7470AE7/7470AE7, BIOS CBET4000 4.6-234-ge63ba791dd 05/27/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x270000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 07FC00000 mask FFFC00000 uncachable
[    0.000000]   1 base 080000000 mask FC0000000 uncachable
[    0.000000]   2 base 0C0000000 mask FF0000000 uncachable
[    0.000000]   3 base 0D0000000 mask FF0000000 write-combining
[    0.000000]   4 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x7fb29 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f0710-0x000f071f] mapped at [ffff898f400f0710]
[    0.000000] Base memory trampoline at [ffff898f40099000] 99000 size 24576
[    0.000000] BRK [0x22e72e000, 0x22e72efff] PGTABLE
[    0.000000] BRK [0x22e72f000, 0x22e72ffff] PGTABLE
[    0.000000] BRK [0x22e730000, 0x22e730fff] PGTABLE
[    0.000000] BRK [0x22e731000, 0x22e731fff] PGTABLE
[    0.000000] BRK [0x22e732000, 0x22e732fff] PGTABLE
[    0.000000] BRK [0x22e733000, 0x22e733fff] PGTABLE
[    0.000000] BRK [0x22e734000, 0x22e734fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35869000-0x36c2bfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F08B0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x000000007FB3A0E0 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x000000007FB3D710 0000F4 (v03 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x000000007FB3A280 003486 (v03 COREv4 COREBOOT 20090419 INTL 20161222)
[    0.000000] ACPI: FACS 0x000000007FB3A240 000040
[    0.000000] ACPI: SSDT 0x000000007FB3D810 0005A0 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: MCFG 0x000000007FB3DDB0 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: TCPA 0x000000007FB3DDF0 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x000000007FB3DE30 000068 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DMAR 0x000000007FB3DEA0 000078 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x000000007FB3DF20 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000026fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x26fff6000-0x26fffafff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000026fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007fb28fff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000026fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000026fffffff]
[    0.000000] On node 0 totalpages: 2030280
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8109 pages used for memmap
[    0.000000]   DMA32 zone: 518953 pages, LIFO batch:31
[    0.000000]   Normal zone: 23552 pages used for memmap
[    0.000000]   Normal zone: 1507328 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x0000000080000000-0x000000008fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7fb29000-0x7fbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7fc00000-0x8fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x90000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
[    0.000000] e820: [mem 0x90000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff8991afc00000 s103512 r8192 d31656 u1048576
[    0.000000] pcpu-alloc: s103512 r8192 d31656 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1998533
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-3-amd64 root=UUID=a994a1c5-a911-48bd-a468-4aa6a9728001 ro quiet iomem=relaxed
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7891896K/8121120K available (6179K kernel code, 1136K rwdata, 2852K rodata, 1392K init, 688K bss, 229224K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.000000] NR_IRQS:33024 nr_irqs:440 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1866.761 MHz processor
[    0.004014] Calibrating delay loop (skipped), value calculated using timer frequency.. 3733.52 BogoMIPS (lpj=7467044)
[    0.004018] pid_max: default: 32768 minimum: 301
[    0.004045] ACPI: Core revision 20160831
[    0.010191] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.010276] Security Framework initialized
[    0.010279] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.010289] AppArmor: AppArmor disabled by boot time parameter
[    0.011168] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.015496] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.017601] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.017617] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.018193] CPU: Physical Processor ID: 0
[    0.018194] CPU: Processor Core ID: 0
[    0.018197] mce: CPU supports 6 MCE banks
[    0.018207] CPU0: Thermal monitoring enabled (TM2)
[    0.018213] process: using mwait in idle threads
[    0.018219] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.018221] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.018725] Freeing SMP alternatives memory: 24K (ffffffff9347a000 - ffffffff93480000)
[    0.024027] ftrace: allocating 25141 entries in 99 pages
[    0.036122] smpboot: Max logical packages: 1
[    0.036128] DMAR: Host address width 36
[    0.036130] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.036142] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020e30260 ecap 1000
[    0.036144] DMAR: DRHD base: 0x000000fed91000 flags: 0x0
[    0.036151] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c0000020630260 ecap 1000
[    0.036152] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[    0.036158] DMAR: dmar2: reg_base_addr fed93000 ver 1:0 cap c9008020630260 ecap 1000
[    0.036538] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.080000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     L9400  @ 1.86GHz (family: 0x6, model: 0x17, stepping: 0x6)
[    0.080000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.080000] ... version:                2
[    0.080000] ... bit width:              40
[    0.080000] ... generic registers:      2
[    0.080000] ... value mask:             000000ffffffffff
[    0.080000] ... max period:             000000007fffffff
[    0.080000] ... fixed-purpose events:   3
[    0.080000] ... event mask:             0000000700000003
[    0.080000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.080000] x86: Booting SMP configuration:
[    0.080000] .... node  #0, CPUs:      #1
[    0.158032] x86: Booted up 1 node, 2 CPUs
[    0.158032] smpboot: Total of 2 processors activated (7466.97 BogoMIPS)
[    0.160477] devtmpfs: initialized
[    0.160477] x86/mm: Memory block size: 128MB
[    0.168004] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.168004] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.168004] pinctrl core: initialized pinctrl subsystem
[    0.168004] NET: Registered protocol family 16
[    0.180005] cpuidle: using governor ladder
[    0.192004] cpuidle: using governor menu
[    0.192042] ACPI: bus type PCI registered
[    0.192044] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.192154] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.192157] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.192169] PCI: Using configuration type 1 for base access
[    0.204061] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.204082] ACPI: Added _OSI(Module Device)
[    0.204084] ACPI: Added _OSI(Processor Device)
[    0.204085] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.204087] ACPI: Added _OSI(Processor Aggregator Device)
[    0.204325] ACPI: Executed 1 blocks of module-level executable AML code
[    0.208381] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.209830] ACPI : EC: EC started
[    0.209831] ACPI : EC: interrupt blocked
[    0.209927] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.209930] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.209932] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.209933] ACPI: Interpreter enabled
[    0.209959] ACPI: (supports S0 S3 S4 S5)
[    0.209960] ACPI: Using IOAPIC for interrupt routing
[    0.209994] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.223296] acpi ACPI0003:01: ACPI dock station (docks/bays count: 1)
[    0.223800] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.223806] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.223881] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.223894] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.223967] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c67ff])
[    0.224290] PCI host bridge to bus 0000:00
[    0.224293] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.224295] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.224298] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.224300] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.224302] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.224304] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.224306] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.224308] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.224310] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.224312] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.224314] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.224316] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.224319] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.224321] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.224323] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.224325] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfebfffff window]
[    0.224327] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.224330] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.224341] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[    0.224371] DMAR: Forcing write-buffer flush capability
[    0.224372] DMAR: Disabling IOMMU for graphics on this chipset
[    0.224515] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[    0.224529] pci 0000:00:02.0: reg 0x10: [mem 0xe1400000-0xe17fffff 64bit]
[    0.224538] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.224545] pci 0000:00:02.0: reg 0x20: [io  0x3400-0x3407]
[    0.224698] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[    0.224710] pci 0000:00:02.1: reg 0x10: [mem 0xe1800000-0xe18fffff 64bit]
[    0.224911] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000
[    0.224935] pci 0000:00:19.0: reg 0x10: [mem 0xe1b00000-0xe1b1ffff]
[    0.224947] pci 0000:00:19.0: reg 0x14: [mem 0xe1b24000-0xe1b24fff]
[    0.224959] pci 0000:00:19.0: reg 0x18: [io  0x3000-0x301f]
[    0.225053] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.225188] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.225248] pci 0000:00:1a.0: reg 0x20: [io  0x3020-0x303f]
[    0.225396] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.225470] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.225530] pci 0000:00:1a.1: reg 0x20: [io  0x3040-0x305f]
[    0.225677] pci 0000:00:1a.1: System wakeup disabled by ACPI
[    0.225751] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[    0.225811] pci 0000:00:1a.2: reg 0x20: [io  0x3060-0x307f]
[    0.225956] pci 0000:00:1a.2: System wakeup disabled by ACPI
[    0.226038] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.226062] pci 0000:00:1a.7: reg 0x10: [mem 0xe1b26000-0xe1b263ff]
[    0.226176] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.226255] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.226333] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.226359] pci 0000:00:1b.0: reg 0x10: [mem 0xe1b20000-0xe1b23fff 64bit]
[    0.226475] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.226561] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.226637] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.226743] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.226901] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[    0.227015] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.227172] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[    0.227286] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.227448] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[    0.227561] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.227723] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.227783] pci 0000:00:1d.0: reg 0x20: [io  0x3080-0x309f]
[    0.227931] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.228009] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.228069] pci 0000:00:1d.1: reg 0x20: [io  0x30a0-0x30bf]
[    0.228216] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.228291] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.228352] pci 0000:00:1d.2: reg 0x20: [io  0x30c0-0x30df]
[    0.228497] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.228581] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.228605] pci 0000:00:1d.7: reg 0x10: [mem 0xe1b27000-0xe1b273ff]
[    0.228718] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.228796] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.228869] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.229066] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[    0.229345] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[    0.229370] pci 0000:00:1f.2: reg 0x10: [io  0x3408-0x340f]
[    0.229382] pci 0000:00:1f.2: reg 0x14: [io  0x3418-0x341b]
[    0.229394] pci 0000:00:1f.2: reg 0x18: [io  0x3410-0x3417]
[    0.229406] pci 0000:00:1f.2: reg 0x1c: [io  0x341c-0x341f]
[    0.229418] pci 0000:00:1f.2: reg 0x20: [io  0x30e0-0x30ff]
[    0.229431] pci 0000:00:1f.2: reg 0x24: [mem 0xe1b25000-0xe1b257ff]
[    0.229501] pci 0000:00:1f.2: PME# supported from D3hot
[    0.229644] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.229668] pci 0000:00:1f.3: reg 0x10: [mem 0xe1b28000-0xe1b280ff 64bit]
[    0.229700] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.229928] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.230050] pci 0000:02:00.0: [168c:0030] type 00 class 0x028000
[    0.230108] pci 0000:02:00.0: reg 0x10: [mem 0xe1900000-0xe191ffff 64bit]
[    0.230226] pci 0000:02:00.0: reg 0x30: [mem 0xe1920000-0xe192ffff pref]
[    0.230374] pci 0000:02:00.0: supports D1
[    0.230376] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[    0.240028] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.240037] pci 0000:00:1c.1:   bridge window [mem 0xe1900000-0xe19fffff]
[    0.240154] pci 0000:03:00.0: [168c:0030] type 00 class 0x028000
[    0.240212] pci 0000:03:00.0: reg 0x10: [mem 0xe1a00000-0xe1a1ffff 64bit]
[    0.240330] pci 0000:03:00.0: reg 0x30: [mem 0xe1a20000-0xe1a2ffff pref]
[    0.240480] pci 0000:03:00.0: supports D1
[    0.240481] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[    0.252027] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.252035] pci 0000:00:1c.2:   bridge window [mem 0xe1a00000-0xe1afffff]
[    0.252161] acpiphp: Slot [1] registered
[    0.252201] pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.252247] pci 0000:04:00.0: reg 0x10: [mem 0xe0800000-0xe0807fff 64bit]
[    0.252472] pci 0000:04:00.0: PME# supported from D3hot
[    0.264023] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.264029] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.264034] pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe08fffff]
[    0.264042] pci 0000:00:1c.3:   bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[    0.264234] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.264248] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.264251] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.264253] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.264255] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[    0.264258] pci 0000:00:1e.0:   bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[    0.264260] pci 0000:00:1e.0:   bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
[    0.264262] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.264264] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.264266] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.264269] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.264271] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.264273] pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.264276] pci 0000:00:1e.0:   bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[    0.264278] pci 0000:00:1e.0:   bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[    0.264280] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[    0.264282] pci 0000:00:1e.0:   bridge window [mem 0x90000000-0xfebfffff window] (subtractive decode)
[    0.264285] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[    0.264498] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.264588] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.264675] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.264763] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.264849] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.264936] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.265022] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.265108] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.267420] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.267583] ACPI : EC: interrupt unblocked
[    0.267594] ACPI : EC: event unblocked
[    0.267603] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.267606] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.267752] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.267752] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.267752] vgaarb: loaded
[    0.267752] vgaarb: bridge control possible 0000:00:02.0
[    0.267752] PCI: Using ACPI for IRQ routing
[    0.268407] PCI: pci_cache_line_size set to 64 bytes
[    0.268511] e820: reserve RAM buffer [mem 0x7fb29000-0x7fffffff]
[    0.268708] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.268708] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.268708] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.272011] clocksource: Switched to clocksource hpet
[    0.284418] VFS: Disk quotas dquot_6.6.0
[    0.284460] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.284608] pnp: PnP ACPI init
[    0.284791] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.284794] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.284797] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.284799] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.284802] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.284805] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.284808] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.284810] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.284816] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.285524] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.285529] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.285618] system 00:02: [io  0x0800-0x080f] has been reserved
[    0.285621] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.285623] system 00:02: [io  0x0580-0x05bf] has been reserved
[    0.285627] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.285675] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.285743] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.285801] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.286017] pnp: PnP ACPI: found 6 devices
[    0.294182] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.294244] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.294262] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.294269] pci 0000:00:1c.1:   bridge window [mem 0xe1900000-0xe19fffff]
[    0.294279] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.294286] pci 0000:00:1c.2:   bridge window [mem 0xe1a00000-0xe1afffff]
[    0.294297] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.294300] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.294307] pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe08fffff]
[    0.294312] pci 0000:00:1c.3:   bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[    0.294320] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.294336] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.294339] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.294341] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.294343] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.294345] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[    0.294347] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[    0.294350] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.294352] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.294354] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.294356] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.294358] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.294361] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.294363] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.294365] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[    0.294367] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.294369] pci_bus 0000:00: resource 19 [mem 0x90000000-0xfebfffff window]
[    0.294371] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[    0.294374] pci_bus 0000:02: resource 1 [mem 0xe1900000-0xe19fffff]
[    0.294377] pci_bus 0000:03: resource 1 [mem 0xe1a00000-0xe1afffff]
[    0.294379] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    0.294381] pci_bus 0000:04: resource 1 [mem 0xe0000000-0xe08fffff]
[    0.294383] pci_bus 0000:04: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref]
[    0.294386] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.294388] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.294390] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.294392] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.294394] pci_bus 0000:05: resource 8 [mem 0x000c8000-0x000cbfff window]
[    0.294397] pci_bus 0000:05: resource 9 [mem 0x000cc000-0x000cffff window]
[    0.294399] pci_bus 0000:05: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.294401] pci_bus 0000:05: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.294403] pci_bus 0000:05: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.294405] pci_bus 0000:05: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.294407] pci_bus 0000:05: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.294410] pci_bus 0000:05: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.294412] pci_bus 0000:05: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.294414] pci_bus 0000:05: resource 17 [mem 0x000ec000-0x000effff window]
[    0.294416] pci_bus 0000:05: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.294418] pci_bus 0000:05: resource 19 [mem 0x90000000-0xfebfffff window]
[    0.294420] pci_bus 0000:05: resource 20 [mem 0xfed40000-0xfed44fff window]
[    0.294561] NET: Registered protocol family 2
[    0.294842] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.295143] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.295614] TCP: Hash tables configured (established 65536 bind 65536)
[    0.295673] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.295741] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.295859] NET: Registered protocol family 1
[    0.295880] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.298543] PCI: CLS 64 bytes, default 64
[    0.298614] Unpacking initramfs...
[    0.884165] Freeing initrd memory: 20236K (ffff898f75869000 - ffff898f76c2c000)
[    0.884357] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.884361] software IO TLB [mem 0x7bb29000-0x7fb29000] (64MB) mapped at [ffff898fbbb29000-ffff898fbfb28fff]
[    0.884971] audit: initializing netlink subsys (disabled)
[    0.885007] audit: type=2000 audit(1495975570.884:1): initialized
[    0.885647] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    0.885686] zbud: loaded
[    0.886718] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.886763] io scheduler noop registered
[    0.886765] io scheduler deadline registered
[    0.886792] io scheduler cfq registered (default)
[    0.888144] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.888150] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[    0.888186] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.888188] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.888193] pcie_pme 0000:00:1c.1:pcie001: service driver pcie_pme loaded
[    0.888221] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    0.888224] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.888229] pcie_pme 0000:00:1c.2:pcie001: service driver pcie_pme loaded
[    0.888258] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.888260] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    0.888265] pcie_pme 0000:00:1c.3:pcie001: service driver pcie_pme loaded
[    0.888283] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.888293] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.888315] efifb: probing for efifb
[    0.888333] efifb: framebuffer at 0xd0000000, using 5120k, total 5120k
[    0.888335] efifb: mode is 1440x900x32, linelength=5760, pages=1
[    0.888335] efifb: scrolling: redraw
[    0.888337] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.893042] Console: switching to colour frame buffer device 180x56
[    0.897538] fb0: EFI VGA frame buffer device
[    0.897551] intel_idle: does not run on family 6 model 23
[    0.905879] Monitor-Mwait will be used to enter C-1 state
[    0.905896] Monitor-Mwait will be used to enter C-2 state
[    0.905910] Monitor-Mwait will be used to enter C-3 state
[    0.905922] tsc: Marking TSC unstable due to TSC halts in idle
[    0.906325] GHES: HEST is not enabled!
[    0.906459] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.907238] Linux agpgart interface v0.103
[    0.907451] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.907452] AMD IOMMUv2 functionality not available on this system
[    0.907767] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.919441] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.919447] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.919715] mousedev: PS/2 mouse device common for all mice
[    0.919781] rtc_cmos 00:03: RTC can wake from S4
[    0.919993] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.920044] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.920100] ledtrig-cpu: registered to indicate activity on CPUs
[    0.920403] NET: Registered protocol family 10
[    0.920727] mip6: Mobile IPv6
[    0.920730] NET: Registered protocol family 17
[    0.920733] mpls_gso: MPLS GSO support
[    0.920988] microcode: sig=0x10676, pf=0x80, revision=0x0
[    0.921053] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.921288] registered taskstats version 1
[    0.921307] zswap: loaded using pool lzo/zbud
[    0.921458] ima: No TPM chip found, activating TPM-bypass!
[    0.921984] rtc_cmos 00:03: setting system clock to 2017-05-28 12:46:11 UTC (1495975571)
[    0.922036] PM: Hibernation image not present or could not be loaded.
[    0.924187] Freeing unused kernel memory: 1392K (ffffffff9331e000 - ffffffff9347a000)
[    0.924188] Write protecting the kernel read-only data: 12288k
[    0.925246] Freeing unused kernel memory: 1996K (ffff89916de0d000 - ffff89916e000000)
[    0.927004] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.930046] Freeing unused kernel memory: 1244K (ffff89916e2c9000 - ffff89916e400000)
[    0.939135] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.092959] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.093077] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.093094] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.093114] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.094371] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.094425] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.096812] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.096915] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.096940] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.097514] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.144105] ACPI: bus type USB registered
[    1.144149] usbcore: registered new interface driver usbfs
[    1.144167] usbcore: registered new interface driver hub
[    1.144208] usbcore: registered new device driver usb
[    1.144896] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.145335] uhci_hcd: USB Universal Host Controller Interface driver
[    1.145571] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.145582] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.145592] uhci_hcd 0000:00:1a.0: detected 2 ports
[    1.145633] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00003020
[    1.146121] pps_core: LinuxPPS API ver. 1 registered
[    1.146123] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.146410] PTP clock support registered
[    1.148259] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    1.148263] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.148265] usb usb1: Product: UHCI Host Controller
[    1.148267] usb usb1: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[    1.148269] usb usb1: SerialNumber: 0000:00:1a.0
[    1.148451] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.148452] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.148551] hub 1-0:1.0: USB hub found
[    1.148561] hub 1-0:1.0: 2 ports detected
[    1.148909] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.148917] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    1.148927] uhci_hcd 0000:00:1a.1: detected 2 ports
[    1.148967] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00003040
[    1.149039] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.149041] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.149044] usb usb2: Product: UHCI Host Controller
[    1.149046] usb usb2: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[    1.149048] usb usb2: SerialNumber: 0000:00:1a.1
[    1.149904] hub 2-0:1.0: USB hub found
[    1.149914] hub 2-0:1.0: 2 ports detected
[    1.150222] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.150230] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[    1.150239] uhci_hcd 0000:00:1a.2: detected 2 ports
[    1.150271] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00003060
[    1.150344] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.150347] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.150349] usb usb3: Product: UHCI Host Controller
[    1.150351] usb usb3: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[    1.150353] usb usb3: SerialNumber: 0000:00:1a.2
[    1.150995] hub 3-0:1.0: USB hub found
[    1.151005] hub 3-0:1.0: 2 ports detected
[    1.151315] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.151323] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    1.151333] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.151356] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080
[    1.152058] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.152061] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.152063] usb usb4: Product: UHCI Host Controller
[    1.152065] usb usb4: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[    1.152067] usb usb4: SerialNumber: 0000:00:1d.0
[    1.152686] ehci-pci: EHCI PCI platform driver
[    1.152783] hub 4-0:1.0: USB hub found
[    1.152793] hub 4-0:1.0: 2 ports detected
[    1.153108] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.153116] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[    1.153125] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.153148] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000030a0
[    1.153933] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.153936] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.153938] usb usb5: Product: UHCI Host Controller
[    1.153940] usb usb5: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[    1.153942] usb usb5: SerialNumber: 0000:00:1d.1
[    1.154961] hub 5-0:1.0: USB hub found
[    1.154971] hub 5-0:1.0: 2 ports detected
[    1.155283] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.155291] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[    1.155299] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.155323] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000030c0
[    1.155534] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.155537] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.155539] usb usb6: Product: UHCI Host Controller
[    1.155541] usb usb6: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[    1.155543] usb usb6: SerialNumber: 0000:00:1d.2
[    1.155737] hub 6-0:1.0: USB hub found
[    1.155747] hub 6-0:1.0: 2 ports detected
[    1.156299] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.166889] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.166899] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 7
[    1.172698] thermal LNXTHERM:00: registered as thermal_zone0
[    1.172700] ACPI: Thermal Zone [THM0] (61 C)
[    1.173979] thermal LNXTHERM:01: registered as thermal_zone1
[    1.173981] ACPI: Thermal Zone [THM1] (51 C)
[    1.177242] xhci_hcd 0000:04:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[    1.177475] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[    1.177478] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.177481] usb usb7: Product: xHCI Host Controller
[    1.177483] usb usb7: Manufacturer: Linux 4.9.0-3-amd64 xhci-hcd
[    1.177485] usb usb7: SerialNumber: 0000:04:00.0
[    1.177685] hub 7-0:1.0: USB hub found
[    1.177699] hub 7-0:1.0: 2 ports detected
[    1.177872] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.177879] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8
[    1.177909] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.177938] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
[    1.177941] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.177943] usb usb8: Product: xHCI Host Controller
[    1.177945] usb usb8: Manufacturer: Linux 4.9.0-3-amd64 xhci-hcd
[    1.177947] usb usb8: SerialNumber: 0000:04:00.0
[    1.178120] hub 8-0:1.0: USB hub found
[    1.178134] hub 8-0:1.0: 2 ports detected
[    1.179718] SCSI subsystem initialized
[    1.188246] libata version 3.00 loaded.
[    1.362439] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:16:18:ee:48
[    1.362442] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.362470] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
[    1.476040] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[    1.476053] usb 2-2: new full-speed USB device number 2 using uhci_hcd
[    1.626362] usb 3-1: not running at top speed; connect to a high speed hub
[    1.633352] usb 3-1: New USB device found, idVendor=17ef, idProduct=1005
[    1.633355] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.635423] hub 3-1:1.0: USB hub found
[    1.637345] hub 3-1:1.0: 4 ports detected
[    1.659463] random: fast init done
[    1.665028] usb 2-2: New USB device found, idVendor=0a5c, idProduct=21e6
[    1.665031] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.665033] usb 2-2: Product: BCM20702A0
[    1.665035] usb 2-2: Manufacturer: Broadcom Corp
[    1.665037] usb 2-2: SerialNumber: 2CD05A7FAEEC
[    1.667498] usb 2-2: USB disconnect, device number 2
[    1.669087] usb 3-1: USB disconnect, device number 2
[    1.669468] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    1.669477] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 9
[    1.669492] ehci-pci 0000:00:1a.7: debug port 1
[    1.673423] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    1.673431] ehci-pci 0000:00:1a.7: irq 18, io mem 0xe1b26000
[    1.688092] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.688165] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[    1.688168] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.688170] usb usb9: Product: EHCI Host Controller
[    1.688172] usb usb9: Manufacturer: Linux 4.9.0-3-amd64 ehci_hcd
[    1.688174] usb usb9: SerialNumber: 0000:00:1a.7
[    1.688411] hub 9-0:1.0: USB hub found
[    1.688421] hub 9-0:1.0: 6 ports detected
[    1.716168] hub 1-0:1.0: USB hub found
[    1.716177] hub 1-0:1.0: 2 ports detected
[    1.744164] hub 2-0:1.0: USB hub found
[    1.744174] hub 2-0:1.0: 2 ports detected
[    1.772131] hub 3-0:1.0: USB hub found
[    1.772140] hub 3-0:1.0: 2 ports detected
[    1.856210] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.856218] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 10
[    1.856233] ehci-pci 0000:00:1d.7: debug port 1
[    1.860157] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.860171] ehci-pci 0000:00:1d.7: irq 16, io mem 0xe1b27000
[    1.876079] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.876239] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[    1.876242] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.876244] usb usb10: Product: EHCI Host Controller
[    1.876246] usb usb10: Manufacturer: Linux 4.9.0-3-amd64 ehci_hcd
[    1.876248] usb usb10: SerialNumber: 0000:00:1d.7
[    1.876453] hub 10-0:1.0: USB hub found
[    1.876464] hub 10-0:1.0: 6 ports detected
[    1.904126] hub 4-0:1.0: USB hub found
[    1.904138] hub 4-0:1.0: 2 ports detected
[    1.916069] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x35d108dd44b, max_idle_ns: 881590682275 ns
[    1.932132] hub 5-0:1.0: USB hub found
[    1.932145] hub 5-0:1.0: 2 ports detected
[    1.960189] hub 6-0:1.0: USB hub found
[    1.960202] hub 6-0:1.0: 2 ports detected
[    1.960490] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.962322] ahci 0000:00:1f.2: version 3.0
[    1.962544] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.962573] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    1.962576] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ccc 
[    1.964093] scsi host0: ahci
[    1.964282] scsi host1: ahci
[    1.964437] scsi host2: ahci
[    1.964605] scsi host3: ahci
[    1.964700] ata1: SATA max UDMA/133 abar m2048@0xe1b25000 port 0xe1b25100 irq 32
[    1.964703] ata2: SATA max UDMA/133 abar m2048@0xe1b25000 port 0xe1b25180 irq 32
[    1.964704] ata3: DUMMY
[    1.964706] ata4: DUMMY
[    2.007684] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    2.026418] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input2
[    2.212031] usb 2-2: new full-speed USB device number 3 using uhci_hcd
[    2.279649] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.281937] ata1.00: NCQ Send/Recv Log not supported
[    2.281939] ata1.00: ATA-9: SAMSUNG MZMTE512HMHP-000MV, EXT42M0Q, max UDMA/133
[    2.281941] ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.282610] ata1.00: NCQ Send/Recv Log not supported
[    2.282683] ata1.00: configured for UDMA/133
[    2.282928] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG MZMTE512 2M0Q PQ: 0 ANSI: 5
[    2.398094] usb 2-2: New USB device found, idVendor=0a5c, idProduct=21e6
[    2.398097] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.398099] usb 2-2: Product: BCM20702A0
[    2.398101] usb 2-2: Manufacturer: Broadcom Corp
[    2.398103] usb 2-2: SerialNumber: 2CD05A7FAEEC
[    2.627667] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.631725] ata2.00: ATAPI: HL-DT-ST DVDRW  GS22N, CP06, max UDMA/133
[    2.636566] ata2.00: configured for UDMA/133
[    2.645093] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRW  GS22N     CP06 PQ: 0 ANSI: 5
[    2.661370] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
[    2.661463] sd 0:0:0:0: [sda] Write Protect is off
[    2.661466] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.661490] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.664980]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10
[    2.666063] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.675095] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
[    2.675096] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.675281] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.908060] usb 9-5: new high-speed USB device number 3 using ehci-pci
[    3.056382] usb 9-5: New USB device found, idVendor=17ef, idProduct=1005
[    3.056385] usb 9-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.056670] hub 9-5:1.0: USB hub found
[    3.056733] hub 9-5:1.0: 4 ports detected
[    3.207799] md: linear personality registered for level -1
[    3.209657] md: multipath personality registered for level -4
[    3.211734] md: raid0 personality registered for level 0
[    3.213757] md: raid1 personality registered for level 1
[    3.312018] raid6: sse2x1   gen()  2579 MB/s
[    3.380019] raid6: sse2x1   xor()  2700 MB/s
[    3.448011] raid6: sse2x2   gen()  4231 MB/s
[    3.516016] raid6: sse2x2   xor()  3325 MB/s
[    3.584016] raid6: sse2x4   gen()  4730 MB/s
[    3.652016] raid6: sse2x4   xor()  3751 MB/s
[    3.652017] raid6: using algorithm sse2x4 gen() 4730 MB/s
[    3.652018] raid6: .... xor() 3751 MB/s, rmw enabled
[    3.652020] raid6: using ssse3x2 recovery algorithm
[    3.652279] xor: measuring software checksum speed
[    3.692012]    prefetch64-sse:  6396.000 MB/sec
[    3.732010]    generic_sse:  5669.000 MB/sec
[    3.732012] xor: using function: prefetch64-sse (6396.000 MB/sec)
[    3.732298] async_tx: api initialized (async)
[    3.735511] md: raid6 personality registered for level 6
[    3.735513] md: raid5 personality registered for level 5
[    3.735515] md: raid4 personality registered for level 4
[    3.741607] md: raid10 personality registered for level 10
[    3.794601] Btrfs loaded, crc32c=crc32c-generic
[    4.046511] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    4.166001] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.173085] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    4.173258] systemd[1]: Detected architecture x86-64.
[    4.173439] systemd[1]: Set hostname to <universi-if9ee1>.
[    4.321964] systemd[1]: fancontrol.service: Cannot add dependency job, ignoring: Unit fancontrol.service is masked.
[    4.321996] systemd[1]: postgresql.service: Cannot add dependency job, ignoring: Unit postgresql.service is masked.
[    4.322034] systemd[1]: isatapd.service: Cannot add dependency job, ignoring: Unit isatapd.service is masked.
[    4.322121] systemd[1]: dnssec-triggerd.service: Cannot add dependency job, ignoring: Unit dnssec-triggerd.service is masked.
[    4.323448] systemd[1]: Reached target User and Group Name Lookups.
[    4.323593] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    4.323655] systemd[1]: Listening on Syslog Socket.
[    4.374391] EXT4-fs (sda4): re-mounted. Opts: discard,user_xattr,errors=remount-ro
[    4.408262] RPC: Registered named UNIX socket transport module.
[    4.408264] RPC: Registered udp transport module.
[    4.408265] RPC: Registered tcp transport module.
[    4.408266] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    4.411467] lp: driver loaded but no devices found
[    4.427126] ppdev: user-space parallel port driver
[    4.482776] drbd: initialized. Version: 8.4.7 (api:1/proto:86-101)
[    4.482779] drbd: srcversion: 0904DF2CCF7283ACE07D07A 
[    4.482780] drbd: registered as block device major 147
[    4.711360] ACPI: AC Adapter [AC] (on-line)
[    4.711395] ACPI Exception: AE_NOT_FOUND, Error reading AC Adapter state (20160831/ac-128)
[    4.712248] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input3
[    4.712254] ACPI: Sleep Button [SLPB]
[    4.712478] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input4
[    4.712487] ACPI: Lid Switch [LID]
[    4.712569] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    4.712572] ACPI: Power Button [PWRF]
[    4.718315] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.722153] acpi device:04: registered as cooling_device2
[    4.722253] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    4.761240] Non-volatile memory driver v1.3
[    4.767219] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.774987] ACPI: Battery Slot [BAT0] (battery present)
[    4.775936] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    4.775976] thinkpad_acpi: http://ibm-acpi.sf.net/
[    4.775977] thinkpad_acpi: ThinkPad BIOS CBET4000 4.6-234-ge63ba791dd, EC 7XHT25WW-3.6
[    4.775978] thinkpad_acpi: Lenovo ThinkPad X200s, model 7470AE7
[    4.776517] ACPI: Battery Slot [BAT1] (battery absent)
[    4.783176] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[    4.783198] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    4.783199] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    4.790710] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    4.791029] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    4.793739] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[    4.812289] [drm] Initialized
[    4.813906] snd_hda_codec_conexant hdaudioC0D0: CX20561 (Hermosa): BIOS auto-probing.
[    4.814469] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20561 (Hermosa): line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
[    4.814471] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.814474] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=2 (0x19/0x16/0x0/0x0/0x0)
[    4.814475] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[    4.814477] snd_hda_codec_conexant hdaudioC0D0:    dig-out=0x1c/0x0
[    4.814479] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[    4.814481] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x18
[    4.814483] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x1d
[    4.814485] snd_hda_codec_conexant hdaudioC0D0:      Dock Mic=0x17
[    4.815577] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[    4.842693] ath: phy0: Killer Wireless card detected
[    4.846869] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    4.847252] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    4.847309] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    4.847362] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    4.847414] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    4.867988] ath: phy0: ASPM enabled: 0x43
[    4.867992] ath: EEPROM regdomain: 0x60
[    4.867993] ath: EEPROM indicates we should expect a direct regpair map
[    4.867995] ath: Country alpha2 being used: 00
[    4.867996] ath: Regpair used: 0x60
[    4.871483] pci 0000:00:00.0: Intel GM45 Chipset
[    4.871506] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    4.873309] pci 0000:00:00.0: detected 262144K stolen memory
[    4.875872] [drm] Memory usable by graphics device = 2048M
[    4.875877] checking generic (d0000000 500000) vs hw (d0000000 10000000)
[    4.875878] fb: switching to inteldrmfb from EFI VGA
[    4.875938] Console: switching to colour dummy device 80x25
[    4.876336] [drm] Replacing VGA console driver
[    4.876429] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.876430] [drm] Driver supports precise vblank timestamp query.
[    4.876436] i915 0000:00:02.0: Invalid PCI ROM data signature: expecting 0x52494350, got 0xe934aa55
[    4.876442] [drm] failed to find VBIOS tables
[    4.876755] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.887264] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    4.887607] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffb6c501780000, irq=17
[    4.897358] ath: phy1: ASPM enabled: 0x43
[    4.897360] ath: EEPROM regdomain: 0x6a
[    4.897361] ath: EEPROM indicates we should expect a direct regpair map
[    4.897363] ath: Country alpha2 being used: 00
[    4.897364] ath: Regpair used: 0x6a
[    4.898919] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[    4.899231] ieee80211 phy1: Atheros AR9300 Rev:3 mem=0xffffb6c501020000, irq=18
[    5.062857] [drm] RC6 disabled, disabling runtime PM support
[    5.063536] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    5.063661] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20160831/utaddress-247)
[    5.063667] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.063670] ACPI Warning: SystemIO range 0x00000000000005B0-0x00000000000005BF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20160831/utaddress-247)
[    5.063674] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.063675] ACPI Warning: SystemIO range 0x0000000000000580-0x00000000000005AF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20160831/utaddress-247)
[    5.063678] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.063679] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    5.116073] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.116116] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    5.262487] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[    5.270548] EXT4-fs (sda3): mounted filesystem without journal. Opts: discard,user_xattr
[    5.308699] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    5.323796] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    5.333917] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    5.357824] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    5.368247] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    5.402592] systemd-journald[242]: Received request to flush runtime journal from PID 1
[    5.421773] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    5.422182] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    5.445497] input: PC Speaker as /devices/platform/pcspkr/input/input13
[    5.508686] intel_powerclamp: No package C-state available
[    5.745989] iTCO_vendor_support: vendor-support=0
[    5.746415] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    5.746468] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0560)
[    5.748372] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.790693] random: crng init done
[    6.049054] Bluetooth: Core ver 2.22
[    6.049072] NET: Registered protocol family 31
[    6.049073] Bluetooth: HCI device and connection manager initialized
[    6.049078] Bluetooth: HCI socket layer initialized
[    6.049081] Bluetooth: L2CAP socket layer initialized
[    6.049088] Bluetooth: SCO socket layer initialized
[    6.073893] usbcore: registered new interface driver btusb
[    6.089241] Bluetooth: hci0: BCM: chip id 63
[    6.121089] Bluetooth: hci0: BCM20702A
[    6.123079] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[    6.123267] bluetooth hci0: firmware: failed to load brcm/BCM20702A1-0a5c-21e6.hcd (-2)
[    6.123276] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
[    6.123278] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
[    6.201553] nfc: nfc_init: NFC Core ver 0.1
[    6.201580] NET: Registered protocol family 39
[    6.290358] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.290360] Bluetooth: BNEP filters: protocol multicast
[    6.290365] Bluetooth: BNEP socket layer initialized
[    6.895605] fbcon: inteldrmfb (fb0) is primary device
[    7.685022] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    7.721441] Ebtables v2.0 registered
[   10.535273] Console: switching to colour frame buffer device 180x56
[   10.559224] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   12.402217] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.608155] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.646130] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   12.656864] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   12.673139] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   12.706797] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   12.715808] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   12.729553] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   13.613082] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   13.634437] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.371659] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.446020] wlan0: authenticate with f8:1a:67:5a:c4:75
[   17.456471] wlan0: send auth to f8:1a:67:5a:c4:75 (try 1/3)
[   17.459192] wlan0: authenticated
[   17.460020] wlan0: associate with f8:1a:67:5a:c4:75 (try 1/3)
[   17.461580] wlan0: RX AssocResp from f8:1a:67:5a:c4:75 (capab=0x11 status=0 aid=1)
[   17.461678] wlan0: associated
[   17.461713] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   17.492605] ath: EEPROM regdomain: 0x8348
[   17.492607] ath: EEPROM indicates we should expect a country code
[   17.492609] ath: doing EEPROM country->regdmn map search
[   17.492610] ath: country maps to regdmn code: 0x3a
[   17.492611] ath: Country alpha2 being used: US
[   17.492612] ath: Regpair used: 0x3a
[   17.492613] ath: regdomain 0x8348 dynamically updated by country IE
[   17.492642] ath: EEPROM regdomain: 0x8348
[   17.492643] ath: EEPROM indicates we should expect a country code
[   17.492644] ath: doing EEPROM country->regdmn map search
[   17.492645] ath: country maps to regdmn code: 0x3a
[   17.492646] ath: Country alpha2 being used: US
[   17.492647] ath: Regpair used: 0x3a
[   17.492648] ath: regdomain 0x8348 dynamically updated by country IE
[   19.111697] thinkpad_ec: loading out-of-tree module taints kernel.
[   19.112192] thinkpad_ec: thinkpad_ec 0.42 loaded.
[   19.113389] tp_smapi 0.42 loading...
[   19.113396] SMAPI not supported (ID=0x67)
[   19.113400] tp_smapi init failed (ret=-6)!
[   19.167758] tp_smapi 0.42 loading...
[   19.167767] SMAPI not supported (ID=0x67)
[   19.167772] tp_smapi init failed (ret=-6)!
[   21.669069] Bluetooth: RFCOMM TTY layer initialized
[   21.669077] Bluetooth: RFCOMM socket layer initialized
[   21.669083] Bluetooth: RFCOMM ver 1.11
[  358.024018] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  673.020278] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  988.024954] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 1303.027474] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 1618.025043] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 1933.020395] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 2248.020087] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 2563.020350] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 2878.024104] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 3193.024667] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 3508.024375] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 3823.027319] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 4138.020031] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready