[    0.000000] Linux version 4.6.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.0 20160609 (Debian 5.4.0-6) ) #1 SMP Debian 4.6.4-1 (2016-07-18)
[    0.000000] Command line: BOOT_IMAGE=(ahci0,msdos2)/vmlinuz root=/dev/mapper/cryptdisk rootflags=subvol=@ ro quiet
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bff11fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bff12000-0x00000000bfffffff] type 16
[    0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000c29fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023c5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 4294CTO/4294CTO, BIOS CBET4000 4.5-720-g010ecf8 12/28/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x23c600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0C0000000 mask FE0000000 uncachable
[    0.000000]   1 base 0E0000000 mask FF0000000 write-combining
[    0.000000]   2 base 0F0000000 mask FF0000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0xbff12 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x01d36000, 0x01d36fff] PGTABLE
[    0.000000] BRK [0x01d37000, 0x01d37fff] PGTABLE
[    0.000000] BRK [0x01d38000, 0x01d38fff] PGTABLE
[    0.000000] BRK [0x01d39000, 0x01d39fff] PGTABLE
[    0.000000] BRK [0x01d3a000, 0x01d3afff] PGTABLE
[    0.000000] BRK [0x01d3b000, 0x01d3bfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35ab1000-0x36d4ffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000BFF260E0 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000BFF29660 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000BFF26280 0033DC (v02 COREv4 COREBOOT 20110725 INTL 20160318)
[    0.000000] ACPI: FACS 0x00000000BFF26240 000040
[    0.000000] ACPI: FACS 0x00000000BFF26240 000040
[    0.000000] ACPI: SSDT 0x00000000BFF29760 0016F4 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: MCFG 0x00000000BFF2AE60 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: TCPA 0x00000000BFF2AEA0 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x00000000BFF2AEE0 00006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DMAR 0x00000000BFF2AF50 0000A8 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000BFF2B000 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023c5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x23c5f6000-0x23c5fafff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000023c5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x00000000bff11fff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000023c5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023c5fffff]
[    0.000000] On node 0 totalpages: 2080945
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 159 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12205 pages used for memmap
[    0.000000]   DMA32 zone: 781074 pages, LIFO batch:31
[    0.000000]   Normal zone: 20248 pages used for memmap
[    0.000000]   Normal zone: 1295872 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xc0a00000-0xc29fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbff12000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xc29fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc2a00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[    0.000000] e820: [mem 0xc2a00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 32 pages/cpu @ffff88023c200000 s93720 r8192 d29160 u524288
[    0.000000] pcpu-alloc: s93720 r8192 d29160 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2048269
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=(ahci0,msdos2)/vmlinuz root=/dev/mapper/cryptdisk rootflags=subvol=@ ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8092596K/8323780K available (5932K kernel code, 1090K rwdata, 2700K rodata, 1336K init, 824K bss, 231184K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:456 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2494.251 MHz processor
[    0.000032] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.50 BogoMIPS (lpj=9977004)
[    0.000035] pid_max: default: 32768 minimum: 301
[    0.000044] ACPI: Core revision 20160108
[    0.002583] ACPI Error: [PCI0.LPCB] Namespace lookup failure, AE_NOT_FOUND (20160108/dswload-210)
[    0.002589] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160108/psobject-227)
[    0.002608] ACPI Exception: AE_NOT_FOUND, (SSDT:COREBOOT) while loading table (20160108/tbxfload-227)
[    0.002610] ACPI Error: 1 table load failures, 1 successful (20160108/tbxfload-247)
[    0.002644] Security Framework initialized
[    0.002646] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.002652] AppArmor: AppArmor disabled by boot time parameter
[    0.003158] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.004775] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.005500] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.005511] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.005849] Disabling memory control group subsystem
[    0.005876] CPU: Physical Processor ID: 0
[    0.005877] CPU: Processor Core ID: 0
[    0.005882] mce: CPU supports 7 MCE banks
[    0.005893] CPU0: Thermal monitoring enabled (TM1)
[    0.005900] process: using mwait in idle threads
[    0.005903] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.005905] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.006286] Freeing SMP alternatives memory: 24K (ffffffff81c60000 - ffffffff81c66000)
[    0.008257] ftrace: allocating 24381 entries in 96 pages
[    0.018959] smpboot: Max logical packages: 2
[    0.018963] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.018968] DMAR: Host address width 36
[    0.018969] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.018979] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.018980] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.018984] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.018986] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.018987] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.018989] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.019320] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.019323] x2apic enabled
[    0.019329] Switched APIC routing to cluster x2apic.
[    0.019781] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.059471] TSC deadline timer enabled
[    0.059475] smpboot: CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.059497] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.059518] ... version:                3
[    0.059519] ... bit width:              48
[    0.059519] ... generic registers:      4
[    0.059520] ... value mask:             0000ffffffffffff
[    0.059521] ... max period:             0000ffffffffffff
[    0.059522] ... fixed-purpose events:   3
[    0.059523] ... event mask:             000000070000000f
[    0.060055] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.060150] x86: Booting SMP configuration:
[    0.060151] .... node  #0, CPUs:      #1 #2 #3
[    0.301625] x86: Booted up 1 node, 4 CPUs
[    0.301628] smpboot: Total of 4 processors activated (19957.42 BogoMIPS)
[    0.304877] devtmpfs: initialized
[    0.304945] x86/mm: Memory block size: 128MB
[    0.308504] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.308573] pinctrl core: initialized pinctrl subsystem
[    0.308715] NET: Registered protocol family 16
[    0.320592] cpuidle: using governor ladder
[    0.325604] cpuidle: using governor menu
[    0.325747] ACPI: bus type PCI registered
[    0.325749] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.325832] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.325834] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.325844] PCI: Using configuration type 1 for base access
[    0.325868] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.333822] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.334069] ACPI: Added _OSI(Module Device)
[    0.334071] ACPI: Added _OSI(Processor Device)
[    0.334072] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.334073] ACPI: Added _OSI(Processor Aggregator Device)
[    0.334283] ACPI: Executed 1 blocks of module-level executable AML code
[    0.335518] ACPI : EC: EC started
[    0.335563] ACPI: Interpreter enabled
[    0.335578] ACPI: (supports S0 S3 S4 S5)
[    0.335580] ACPI: Using IOAPIC for interrupt routing
[    0.335601] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.339431] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.339436] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.339484] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.339492] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.339685] PCI host bridge to bus 0000:00
[    0.339688] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.339689] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.339691] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.339692] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.339694] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.339695] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.339697] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.339698] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.339700] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.339701] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.339703] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.339704] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.339706] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.339707] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.339709] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.339711] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.339712] pci_bus 0000:00: root bus resource [mem 0xc2a00000-0xf7ffffff window]
[    0.339714] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.339716] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.339723] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.339811] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[    0.339820] pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf13fffff 64bit]
[    0.339826] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.339830] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.339905] pci 0000:00:04.0: [8086:0103] type 00 class 0x118000
[    0.339914] pci 0000:00:04.0: reg 0x10: [mem 0xf1620000-0xf1627fff 64bit]
[    0.340016] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.340030] pci 0000:00:19.0: reg 0x10: [mem 0xf1600000-0xf161ffff]
[    0.340039] pci 0000:00:19.0: reg 0x14: [mem 0xf162c000-0xf162cfff]
[    0.340048] pci 0000:00:19.0: reg 0x18: [io  0x3040-0x305f]
[    0.340108] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.340178] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.340196] pci 0000:00:1a.0: reg 0x10: [mem 0xf162e000-0xf162e3ff]
[    0.340279] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.340315] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.340358] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.340375] pci 0000:00:1b.0: reg 0x10: [mem 0xf1628000-0xf162bfff 64bit]
[    0.340447] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.340486] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.340528] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.340603] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.340678] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.340759] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.340835] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.340913] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.340993] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.341116] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.341203] pci 0000:00:1c.5: [8086:1c1c] type 01 class 0x060400
[    0.341315] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.341402] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.341420] pci 0000:00:1d.0: reg 0x10: [mem 0xf162f000-0xf162f3ff]
[    0.341504] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.341540] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.341584] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[    0.341758] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.341776] pci 0000:00:1f.2: reg 0x10: [io  0x3080-0x3087]
[    0.341785] pci 0000:00:1f.2: reg 0x14: [io  0x3090-0x3093]
[    0.341794] pci 0000:00:1f.2: reg 0x18: [io  0x3088-0x308f]
[    0.341802] pci 0000:00:1f.2: reg 0x1c: [io  0x3094-0x3097]
[    0.341811] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.341820] pci 0000:00:1f.2: reg 0x24: [mem 0xf162d000-0xf162d7ff]
[    0.341865] pci 0000:00:1f.2: PME# supported from D3hot
[    0.341933] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.341949] pci 0000:00:1f.3: reg 0x10: [mem 0xf1630000-0xf16300ff 64bit]
[    0.341970] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.342097] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.342181] pci 0000:02:00.0: [168c:0034] type 00 class 0x028000
[    0.342223] pci 0000:02:00.0: reg 0x10: [mem 0xf1400000-0xf147ffff 64bit]
[    0.342307] pci 0000:02:00.0: reg 0x30: [mem 0xf1480000-0xf148ffff pref]
[    0.342422] pci 0000:02:00.0: supports D1 D2
[    0.342423] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.349667] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.349682] pci 0000:00:1c.1:   bridge window [mem 0xf1400000-0xf14fffff]
[    0.349776] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.349781] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.349785] pci 0000:00:1c.3:   bridge window [mem 0xf0800000-0xf0ffffff]
[    0.349791] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[    0.349889] pci 0000:04:00.0: [1180:e823] type 00 class 0x080501
[    0.349923] pci 0000:04:00.0: MMC controller base frequency changed to 50Mhz.
[    0.349961] pci 0000:04:00.0: reg 0x10: [mem 0xf1500000-0xf15000ff]
[    0.350266] pci 0000:04:00.0: supports D1 D2
[    0.350267] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.357670] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.357686] pci 0000:00:1c.4:   bridge window [mem 0xf1500000-0xf15fffff]
[    0.357787] pci 0000:00:1c.5: PCI bridge to [bus 05]
[    0.357920] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.357969] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.358015] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.358059] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.358104] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.358148] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.358191] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.358236] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.358894] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[    0.358979] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.358981] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.358983] vgaarb: loaded
[    0.358984] vgaarb: bridge control possible 0000:00:02.0
[    0.359075] PCI: Using ACPI for IRQ routing
[    0.360535] PCI: pci_cache_line_size set to 64 bytes
[    0.360603] e820: reserve RAM buffer [mem 0xbff12000-0xbfffffff]
[    0.360604] e820: reserve RAM buffer [mem 0x23c600000-0x23fffffff]
[    0.360773] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.360777] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.362804] clocksource: Switched to clocksource hpet
[    0.368636] VFS: Disk quotas dquot_6.6.0
[    0.368663] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.368802] pnp: PnP ACPI init
[    0.368894] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.368896] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.368898] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.368900] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.368901] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.368903] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.368905] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.368907] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.368908] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
[    0.368910] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
[    0.368914] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.369434] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.369437] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.369477] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.369479] system 00:02: [io  0x0480-0x04bf] has been reserved
[    0.369481] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.369504] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.369538] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.369565] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.369573] pnp: PnP ACPI: found 6 devices
[    0.375961] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.376018] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.376032] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.376038] pci 0000:00:1c.1:   bridge window [mem 0xf1400000-0xf14fffff]
[    0.376048] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.376051] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.376056] pci 0000:00:1c.3:   bridge window [mem 0xf0800000-0xf0ffffff]
[    0.376061] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[    0.376067] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.376074] pci 0000:00:1c.4:   bridge window [mem 0xf1500000-0xf15fffff]
[    0.376086] pci 0000:00:1c.5: PCI bridge to [bus 05]
[    0.376104] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.376106] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.376107] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.376109] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.376110] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.376111] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.376113] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.376114] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.376116] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.376117] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.376119] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.376120] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.376122] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.376123] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.376125] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.376126] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.376128] pci_bus 0000:00: resource 20 [mem 0xc2a00000-0xf7ffffff window]
[    0.376129] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[    0.376131] pci_bus 0000:02: resource 1 [mem 0xf1400000-0xf14fffff]
[    0.376133] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.376134] pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf0ffffff]
[    0.376135] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf07fffff 64bit pref]
[    0.376137] pci_bus 0000:04: resource 1 [mem 0xf1500000-0xf15fffff]
[    0.376195] NET: Registered protocol family 2
[    0.376370] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.376505] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.376633] TCP: Hash tables configured (established 65536 bind 65536)
[    0.376662] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.376689] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.376775] NET: Registered protocol family 1
[    0.376793] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.377201] PCI: CLS 64 bytes, default 64
[    0.377254] Unpacking initramfs...
[    0.713075] Freeing initrd memory: 19068K (ffff880035ab1000 - ffff880036d50000)
[    0.713098] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.713101] software IO TLB [mem 0xbbf12000-0xbff12000] (64MB) mapped at [ffff8800bbf12000-ffff8800bff11fff]
[    0.713155] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    0.713156] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    0.713157] RAPL PMU: hw unit of domain package 2^-16 Joules
[    0.713158] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    0.713544] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.713577] audit: initializing netlink subsys (disabled)
[    0.713595] audit: type=2000 audit(1482923217.708:1): initialized
[    0.714026] Initialise system trusted keyring
[    0.714117] workingset: timestamp_bits=37 max_order=21 bucket_order=0
[    0.714137] zbud: loaded
[    0.761414] Key type asymmetric registered
[    0.761417] Asymmetric key parser 'x509' registered
[    0.761438] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.761470] io scheduler noop registered
[    0.761473] io scheduler deadline registered
[    0.761488] io scheduler cfq registered (default)
[    0.762315] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.762320] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.762345] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.762346] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.762351] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.762373] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.762377] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.762404] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    0.762406] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    0.762411] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    0.762437] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[    0.762443] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[    0.762450] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.762463] pciehp 0000:00:1c.3:pcie04: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.762490] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
[    0.762495] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.762516] intel_idle: MWAIT substates: 0x21120
[    0.762517] intel_idle: v0.4.1 model 0x2A
[    0.762673] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.762694] GHES: HEST is not enabled!
[    0.762759] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.763169] Linux agpgart interface v0.103
[    0.763220] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.763221] AMD IOMMUv2 functionality not available on this system
[    0.763562] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.768907] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.768912] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.769049] mousedev: PS/2 mouse device common for all mice
[    0.769092] rtc_cmos 00:03: RTC can wake from S4
[    0.769220] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.769252] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.769264] Intel P-state driver initializing.
[    0.773425] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.823029] ledtrig-cpu: registered to indicate activity on CPUs
[    0.823750] NET: Registered protocol family 10
[    0.824466] mip6: Mobile IPv6
[    0.824479] NET: Registered protocol family 17
[    0.824493] mpls_gso: MPLS GSO support
[    0.825244] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
[    0.825269] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29
[    0.825283] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29
[    0.825306] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
[    0.825529] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.826314] registered taskstats version 1
[    0.826373] Loading compiled-in X.509 certificates
[    0.830349] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    0.831326] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    0.831410] zswap: loaded using pool lzo/zbud
[    0.832483] rtc_cmos 00:03: setting system clock to 2016-12-28 11:06:58 UTC (1482923218)
[    0.832689] PM: Hibernation image not present or could not be loaded.
[    0.836260] Freeing unused kernel memory: 1336K (ffffffff81b12000 - ffffffff81c60000)
[    0.836264] Write protecting the kernel read-only data: 10240k
[    0.836808] Freeing unused kernel memory: 196K (ffff8800015cf000 - ffff880001600000)
[    0.845199] Freeing unused kernel memory: 1396K (ffff8800018a3000 - ffff880001a00000)
[    0.863067] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.974943] random: systemd-udevd urandom read with 1 bits of entropy available
[    1.013538] fjes: module verification failed: signature and/or required key missing - tainting kernel
[    1.014003] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.024261] thermal LNXTHERM:00: registered as thermal_zone0
[    1.024266] ACPI: Thermal Zone [THM0] (54 C)
[    1.024497] pps_core: LinuxPPS API ver. 1 registered
[    1.024501] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.024848] PTP clock support registered
[    1.025228] thermal LNXTHERM:01: registered as thermal_zone1
[    1.025232] ACPI: Thermal Zone [THM1] (27 C)
[    1.026526] ACPI: bus type USB registered
[    1.026550] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.026554] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.026571] usbcore: registered new interface driver usbfs
[    1.026591] usbcore: registered new interface driver hub
[    1.026621] usbcore: registered new device driver usb
[    1.026666] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.027145] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.027365] ehci-pci: EHCI PCI platform driver
[    1.028871] sdhci: Secure Digital Host Controller Interface driver
[    1.028874] sdhci: Copyright(c) Pierre Ossman
[    1.029238] sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e823] (rev 4)
[    1.030861] mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA
[    1.034738] SCSI subsystem initialized
[    1.037488] libata version 3.00 loaded.
[    1.039709] AVX version of gcm_enc/dec engaged.
[    1.039712] AES CTR mode by8 optimization enabled
[    1.057191] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[    1.291099] e1000e 0000:00:19.0 eth0: registered PHC clock
[    1.291115] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:c9:0a:e5
[    1.291123] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.291189] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[    1.291979] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.292007] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.292038] ehci-pci 0000:00:1a.0: debug port 2
[    1.293187] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    1.295953] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.296009] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf162e000
[    1.308201] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.308315] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.308321] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.308325] usb usb1: Product: EHCI Host Controller
[    1.308328] usb usb1: Manufacturer: Linux 4.6.0-1-amd64 ehci_hcd
[    1.308331] usb usb1: SerialNumber: 0000:00:1a.0
[    1.308766] hub 1-0:1.0: USB hub found
[    1.308784] hub 1-0:1.0: 3 ports detected
[    1.309265] ahci 0000:00:1f.2: version 3.0
[    1.309696] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.319847] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[    1.319856] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    1.321158] scsi host0: ahci
[    1.321388] scsi host1: ahci
[    1.321597] scsi host2: ahci
[    1.322815] scsi host3: ahci
[    1.323052] scsi host4: ahci
[    1.323268] scsi host5: ahci
[    1.323385] ata1: SATA max UDMA/133 abar m2048@0xf162d000 port 0xf162d100 irq 32
[    1.323390] ata2: SATA max UDMA/133 abar m2048@0xf162d000 port 0xf162d180 irq 32
[    1.323395] ata3: SATA max UDMA/133 abar m2048@0xf162d000 port 0xf162d200 irq 32
[    1.323397] ata4: DUMMY
[    1.323400] ata5: DUMMY
[    1.323401] ata6: DUMMY
[    1.323702] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.323718] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.323743] ehci-pci 0000:00:1d.0: debug port 2
[    1.327660] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.327692] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf162f000
[    1.338883] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.338959] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.338963] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.338966] usb usb2: Product: EHCI Host Controller
[    1.338969] usb usb2: Manufacturer: Linux 4.6.0-1-amd64 ehci_hcd
[    1.338972] usb usb2: SerialNumber: 0000:00:1d.0
[    1.339259] hub 2-0:1.0: USB hub found
[    1.339271] hub 2-0:1.0: 3 ports detected
[    1.618951] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.634692] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.636719] ata1.00: supports DRM functions and may not be fully accessible
[    1.636835] ata1.00: disabling queued TRIM support
[    1.636840] ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0DB6Q, max UDMA/133
[    1.636845] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.637041] ata1.00: supports DRM functions and may not be fully accessible
[    1.637117] ata1.00: disabling queued TRIM support
[    1.637125] ata1.00: configured for UDMA/133
[    1.637689] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 840  DB6Q PQ: 0 ANSI: 5
[    1.650928] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.711121] tsc: Refined TSC clocksource calibration: 2494.333 MHz
[    1.711130] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f45085418, max_idle_ns: 440795285711 ns
[    1.751708] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.751718] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.752396] hub 1-1:1.0: USB hub found
[    1.752622] hub 1-1:1.0: 6 ports detected
[    1.783579] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.783588] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.784149] hub 2-1:1.0: USB hub found
[    1.784370] hub 2-1:1.0: 8 ports detected
[    1.970730] ata2: SATA link down (SStatus 0 SControl 300)
[    2.022965] usb 1-1.2: new full-speed USB device number 3 using ehci-pci
[    2.030799] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[    2.054968] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[    2.118095] usb 1-1.2: New USB device found, idVendor=1050, idProduct=0116
[    2.118104] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.118109] usb 1-1.2: Product: Yubikey NEO OTP+U2F+CCID
[    2.118112] usb 1-1.2: Manufacturer: Yubico
[    2.122260] hidraw: raw HID events driver (C) Jiri Kosina
[    2.124922] usbcore: registered new interface driver usbhid
[    2.124931] usbhid: USB HID core driver
[    2.125429] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00/0x0, board id: 1611, fw id: 774180
[    2.125453] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    2.126463] input: Yubico Yubikey NEO OTP+U2F+CCID as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:1050:0116.0001/input/input3
[    2.150088] usb 2-1.3: string descriptor 0 read error: -22
[    2.150160] usb 2-1.3: New USB device found, idVendor=04ca, idProduct=3006
[    2.150164] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.179431] hid-generic 0003:1050:0116.0001: input,hidraw0: USB HID v1.10 Keyboard [Yubico Yubikey NEO OTP+U2F+CCID] on usb-0000:00:1a.0-1.2/input0
[    2.179978] hid-generic 0003:1050:0116.0002: hiddev0,hidraw1: USB HID v1.10 Device [Yubico Yubikey NEO OTP+U2F+CCID] on usb-0000:00:1a.0-1.2/input1
[    2.185671] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    2.194992] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
[    2.222963] usb 2-1.4: new high-speed USB device number 4 using ehci-pci
[    2.282594] ata3: SATA link down (SStatus 0 SControl 300)
[    2.289351] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    2.289548] sd 0:0:0:0: [sda] Write Protect is off
[    2.289555] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.289627] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.292141]  sda: sda1 sda2
[    2.292219] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016
[    2.292226] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.292230] usb 1-1.3: Product: Biometric Coprocessor
[    2.292235] usb 1-1.3: Manufacturer: UPEK
[    2.293084] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.326861] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=190d
[    2.326894] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.326898] usb 2-1.4: Product: F5521gw
[    2.326901] usb 2-1.4: Manufacturer: Ericsson
[    2.326904] usb 2-1.4: SerialNumber: 1B6D288CB004B6B0
[    2.363070] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
[    2.381323] device-mapper: uevent: version 1.0.3
[    2.381735] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    2.434991] usb 2-1.5: new full-speed USB device number 5 using ehci-pci
[    2.530480] usb 2-1.5: New USB device found, idVendor=056a, idProduct=00e6
[    2.530490] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.530495] usb 2-1.5: Product: ISD-V4
[    2.530499] usb 2-1.5: Manufacturer: Tablet
[    2.547991] input: Wacom ISDv4 E6 Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:056A:00E6.0003/input/input5
[    2.548276] wacom 0003:056A:00E6.0003: hidraw2: USB HID v1.11 Device [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input0
[    2.549262] input: Wacom ISDv4 E6 Finger as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:056A:00E6.0004/input/input9
[    2.549579] wacom 0003:056A:00E6.0004: hidraw3: USB HID v1.11 Mouse [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input1
[    2.711155] clocksource: Switched to clocksource tsc
[    2.887058] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b217
[    2.887071] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.887076] usb 1-1.6: Product: Integrated Camera
[    2.887081] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[    2.996556] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    3.293058] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input4
[    7.586584] random: nonblocking pool is initialized
[   10.518634] NET: Registered protocol family 38
[   29.107757] raid6: sse2x1   gen()  6739 MB/s
[   29.175757] raid6: sse2x1   xor()  6193 MB/s
[   29.243759] raid6: sse2x2   gen() 10586 MB/s
[   29.311759] raid6: sse2x2   xor()  7672 MB/s
[   29.379764] raid6: sse2x4   gen() 12307 MB/s
[   29.447765] raid6: sse2x4   xor()  9089 MB/s
[   29.447766] raid6: using algorithm sse2x4 gen() 12307 MB/s
[   29.447767] raid6: .... xor() 9089 MB/s, rmw enabled
[   29.447768] raid6: using ssse3x2 recovery algorithm
[   29.447965] xor: automatically using best checksumming function:
[   29.487764]    avx       : 21019.000 MB/sec
[   29.497509] Btrfs loaded
[   29.506733] BTRFS: device fsid af0b59fd-001b-450c-bce0-009469440833 devid 1 transid 72759 /dev/mapper/cryptdisk
[   29.516471] BTRFS info (device dm-0): disk space caching is enabled
[   29.516475] BTRFS: has skinny extents
[   29.640593] BTRFS: detected SSD devices, enabling SSD mode
[   30.022627] ip_tables: (C) 2000-2006 Netfilter Core Team
[   30.060684] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[   30.060871] systemd[1]: Detected architecture x86-64.
[   30.061222] systemd[1]: Set hostname to <cornaLaptop>.
[   30.217450] systemd[1]: snapper-timeline.timer: Cannot add dependency job, ignoring: Unit snapper-timeline.timer is masked.
[   30.217483] systemd[1]: snapper-cleanup.timer: Cannot add dependency job, ignoring: Unit snapper-cleanup.timer is masked.
[   30.217507] systemd[1]: iodined.service: Cannot add dependency job, ignoring: Unit iodined.service is masked.
[   30.217598] systemd[1]: vsftpd.service: Cannot add dependency job, ignoring: Unit vsftpd.service is masked.
[   30.218474] systemd[1]: Listening on Journal Audit Socket.
[   30.218530] systemd[1]: Reached target Swap.
[   30.218570] systemd[1]: Listening on LVM2 poll daemon socket.
[   30.218603] systemd[1]: Listening on Syslog Socket.
[   30.218618] systemd[1]: Reached target User and Group Name Lookups.
[   30.218763] systemd[1]: Created slice User and Session Slice.
[   30.218900] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   30.218945] systemd[1]: Listening on udev Control Socket.
[   30.218983] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   30.219012] systemd[1]: Listening on Journal Socket (/dev/log).
[   30.219039] systemd[1]: Listening on RPCbind Server Activation Socket.
[   30.219087] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   30.219128] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   30.219169] systemd[1]: Listening on Journal Socket.
[   30.219220] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   30.219249] systemd[1]: Listening on fsck to fsckd communication Socket.
[   30.219277] systemd[1]: Listening on udev Kernel Socket.
[   30.219303] systemd[1]: Listening on LVM2 metadata daemon socket.
[   30.219414] systemd[1]: Created slice System Slice.
[   30.232118] systemd[1]: Starting Remount Root and Kernel File Systems...
[   30.232316] systemd[1]: Created slice system-getty.slice.
[   30.233564] systemd[1]: Starting Load Kernel Modules...
[   30.234434] systemd[1]: Mounting Huge Pages File System...
[   30.234543] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[   30.235238] systemd[1]: Mounting Temporary Directory...
[   30.236523] systemd[1]: Mounting RPC Pipe File System...
[   30.237783] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   30.241200] systemd[1]: Starting Set the console keyboard layout...
[   30.241786] systemd[1]: Mounting POSIX Message Queue File System...
[   30.242549] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   30.243078] systemd[1]: Mounting Debug File System...
[   30.243610] systemd[1]: Starting Uncomplicated firewall...
[   30.244084] systemd[1]: Starting Journal Service...
[   30.273427] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   30.273458] systemd[1]: Reached target Slices.
[   30.273595] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[   30.274501] BTRFS info (device dm-0): use lzo compression
[   30.274506] BTRFS info (device dm-0): turning on discard
[   30.274507] BTRFS info (device dm-0): disk space caching is enabled
[   30.275417] systemd[1]: Mounted Temporary Directory.
[   30.275465] systemd[1]: Mounted Debug File System.
[   30.275492] systemd[1]: Mounted POSIX Message Queue File System.
[   30.275524] systemd[1]: Mounted Huge Pages File System.
[   30.275785] systemd[1]: Started Remount Root and Kernel File Systems.
[   30.276536] lp: driver loaded but no devices found
[   30.278267] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   30.279058] systemd[1]: Starting Create Static Device Nodes in /dev...
[   30.280778] ppdev: user-space parallel port driver
[   30.285368] systemd[1]: Starting udev Coldplug all Devices...
[   30.285946] systemd[1]: Starting Load/Save Random Seed...
[   30.291459] RPC: Registered named UNIX socket transport module.
[   30.291462] RPC: Registered udp transport module.
[   30.291463] RPC: Registered tcp transport module.
[   30.291464] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   30.292123] systemd[1]: Mounted RPC Pipe File System.
[   30.293462] systemd[1]: Started LVM2 metadata daemon.
[   30.296536] systemd[1]: Started Load/Save Random Seed.
[   30.304640] systemd[1]: Started Load Kernel Modules.
[   30.305349] systemd[1]: Starting Apply Kernel Variables...
[   30.310953] systemd[1]: Started Create Static Device Nodes in /dev.
[   30.311542] systemd[1]: Starting udev Kernel Device Manager...
[   30.312492] systemd[1]: Started Apply Kernel Variables.
[   30.323869] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[   30.324429] systemd[1]: Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[   30.326533] systemd[1]: Started Journal Service.
[   30.337240] systemd-journald[330]: Received request to flush runtime journal from PID 1
[   30.339275] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   30.430985] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1b/PNP0C09:00/PNP0C0E:00/input/input11
[   30.430991] ACPI: Sleep Button [SLPB]
[   30.431051] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1b/PNP0C09:00/PNP0C0D:00/input/input12
[   30.432066] ACPI: Lid Switch [LID]
[   30.432133] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input13
[   30.432137] ACPI: Power Button [PWRF]
[   30.445493] ACPI: AC Adapter [AC] (on-line)
[   30.450183] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   30.456021] Non-volatile memory driver v1.3
[   30.461458] [drm] Initialized drm 1.1.0 20060810
[   30.463822] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20160108/utaddress-255)
[   30.463831] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   30.464398] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160108/utaddress-255)
[   30.464406] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   30.464882] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160108/utaddress-255)
[   30.464890] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   30.464908] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   30.466748] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160108/utaddress-255)
[   30.466757] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   30.466760] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   30.468642] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[   30.468646] thinkpad_acpi: http://ibm-acpi.sf.net/
[   30.468648] thinkpad_acpi: ThinkPad BIOS CBET4000 4.5-720-g010ecf8, EC 8DHT34WW-3.20
[   30.468649] thinkpad_acpi: Lenovo ThinkPad X220 Tablet, model 4294CTO
[   30.468736] ACPI: Battery Slot [BAT0] (battery present)
[   30.469081] ACPI: Battery Slot [BAT1] (battery absent)
[   30.469104] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   30.477716] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[   30.478769] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input14
[   30.484055] input: PC Speaker as /devices/platform/pcspkr/input/input15
[   30.501554] [drm] Memory usable by graphics device = 2048M
[   30.501557] [drm] Replacing VGA console driver
[   30.502133] Console: switching to colour dummy device 80x25
[   30.511055] intel_rapl: Found RAPL domain package
[   30.511059] intel_rapl: Found RAPL domain core
[   30.511060] intel_rapl: Found RAPL domain uncore
[   30.520681] ath: phy0: ASPM enabled: 0x43
[   30.520686] ath: EEPROM regdomain: 0x6a
[   30.520687] ath: EEPROM indicates we should expect a direct regpair map
[   30.520690] ath: Country alpha2 being used: 00
[   30.520691] ath: Regpair used: 0x6a
[   30.522253] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
[   30.522743] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[   30.522746] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   30.522755] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[   30.522758] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[   30.522761] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[   30.522764] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x23
[   30.522767] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x1b
[   30.522770] snd_hda_codec_conexant hdaudioC0D0:      Dock Mic=0x1a
[   30.524108] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[   30.524557] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   30.524800] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90001100000, irq=17
[   30.530652] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   30.530914] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   30.530964] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   30.531011] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[   30.531062] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[   30.531107] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[   30.531156] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[   30.531203] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[   30.552358] iTCO_vendor_support: vendor-support=0
[   30.553917] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   30.553956] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0560)
[   30.554527] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   30.561837] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   30.561841] [drm] Driver supports precise vblank timestamp query.
[   30.562095] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   30.602263] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[   30.777753] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   30.811819] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[   31.137088] fbcon: inteldrmfb (fb0) is primary device
[   31.824183] Console: switching to colour frame buffer device 170x48
[   31.824343] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20160108/video-1241)
[   31.824346] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   31.824563] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input24
[   31.824805] [drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on minor 0
[   32.062902] Bluetooth: Core ver 2.21
[   32.062921] NET: Registered protocol family 31
[   32.062922] Bluetooth: HCI device and connection manager initialized
[   32.062927] Bluetooth: HCI socket layer initialized
[   32.062930] Bluetooth: L2CAP socket layer initialized
[   32.062939] Bluetooth: SCO socket layer initialized
[   32.064066] media: Linux media interface: v0.10
[   32.068674] Linux video capture interface: v2.00
[   32.128670] usbcore: registered new interface driver btusb
[   32.131381] usb 2-1.3: firmware: direct-loading firmware ar3k/AthrBT_0x11020000.dfu
[   32.132357] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
[   32.133947] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[   32.133950] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[   32.133953] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[   32.134114] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input25
[   32.134254] usbcore: registered new interface driver uvcvideo
[   32.134256] USB Video Class driver (1.1.1)
[   32.171231] usb 2-1.3: firmware: direct-loading firmware ar3k/ramps_0x11020000_40.dfu
[   32.175191] usbcore: registered new interface driver ath3k
[   32.306181] usb 2-1.3: USB disconnect, device number 3
[   32.507879] usb 2-1.3: new full-speed USB device number 6 using ehci-pci
[   32.602721] usb 2-1.3: string descriptor 0 read error: -22
[   32.602731] usb 2-1.3: New USB device found, idVendor=04ca, idProduct=3006
[   32.602734] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   32.728940] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   33.019707] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   33.206000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   33.206004] Bluetooth: BNEP filters: protocol multicast
[   33.206008] Bluetooth: BNEP socket layer initialized
[   33.276094] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   33.282419] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   33.294547] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   33.317869] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   33.349156] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[   33.350399] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[   33.353664] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[   33.357647] usbcore: registered new interface driver cdc_acm
[   33.357651] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   33.357876] cdc_wdm 2-1.4:1.5: cdc-wdm1: USB WDM device
[   33.378400] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[   33.378838] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[   33.378875] usbcore: registered new interface driver cdc_ncm
[   33.379355] cdc_wdm 2-1.4:1.8: cdc-wdm2: USB WDM device
[   33.379383] usbcore: registered new interface driver cdc_wdm
[   33.387278] usbcore: registered new interface driver cdc_mbim
[   33.391566] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[   33.407111] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2
[   33.407120] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2
[   33.407123] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2
[   33.407125] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2
[   33.407128] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2
[   33.439816] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   33.488814] Ebtables v2.0 registered
[   33.729298] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[   33.733564] tun: Universal TUN/TAP device driver, 1.6
[   33.733568] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   33.784148] virbr0: port 1(virbr0-nic) entered blocking state
[   33.784155] virbr0: port 1(virbr0-nic) entered disabled state
[   33.784335] device virbr0-nic entered promiscuous mode
[   33.913694] virbr0: port 1(virbr0-nic) entered blocking state
[   33.913701] virbr0: port 1(virbr0-nic) entered listening state
[   33.967004] virbr0: port 1(virbr0-nic) entered disabled state
[   34.885855] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[   34.886932] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[   35.281972] Bluetooth: RFCOMM TTY layer initialized
[   35.281981] Bluetooth: RFCOMM socket layer initialized
[   35.281988] Bluetooth: RFCOMM ver 1.11
[   36.958472] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   37.010370] wlp2s0: authenticate with 04:bd:88:62:9a:70
[   37.020188] wlp2s0: send auth to 04:bd:88:62:9a:70 (try 1/3)
[   37.022799] wlp2s0: authenticated
[   37.024062] wlp2s0: associate with 04:bd:88:62:9a:70 (try 1/3)
[   37.028062] wlp2s0: RX AssocResp from 04:bd:88:62:9a:70 (capab=0x1011 status=0 aid=9)
[   37.028183] wlp2s0: associated
[   37.028222] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   37.031910] ath: EEPROM regdomain: 0x8260
[   37.031913] ath: EEPROM indicates we should expect a country code
[   37.031914] ath: doing EEPROM country->regdmn map search
[   37.031915] ath: country maps to regdmn code: 0x52
[   37.031916] ath: Country alpha2 being used: PH
[   37.031917] ath: Regpair used: 0x52
[   37.031918] ath: regdomain 0x8260 dynamically updated by country IE
[   37.088989] wlp2s0: Limiting TX power to 26 (26 - 0) dBm as advertised by 04:bd:88:62:9a:70
[   46.705948] fuse init (API version 7.24)
[   79.828215] wlp2s0: disconnect from AP 04:bd:88:62:9a:70 for new auth to 04:bd:88:62:97:d0
[   79.834716] wlp2s0: authenticate with 04:bd:88:62:97:d0
[   79.845276] wlp2s0: send auth to 04:bd:88:62:97:d0 (try 1/3)
[   79.856201] wlp2s0: authenticated
[   79.857547] wlp2s0: associate with 04:bd:88:62:97:d0 (try 1/3)
[   79.870427] wlp2s0: RX AssocResp from 04:bd:88:62:97:d0 (capab=0x1011 status=0 aid=16)
[   79.870551] wlp2s0: associated
[   79.880082] ath: EEPROM regdomain: 0x8260
[   79.880088] ath: EEPROM indicates we should expect a country code
[   79.880092] ath: doing EEPROM country->regdmn map search
[   79.880095] ath: country maps to regdmn code: 0x52
[   79.880097] ath: Country alpha2 being used: PH
[   79.880099] ath: Regpair used: 0x52
[   79.880101] ath: regdomain 0x8260 dynamically updated by country IE
[   79.940416] wlp2s0: Limiting TX power to 26 (26 - 0) dBm as advertised by 04:bd:88:62:97:d0
[  185.810476] wlp2s0: disconnect from AP 04:bd:88:62:97:d0 for new auth to 04:bd:88:62:9a:70
[  185.817335] wlp2s0: authenticate with 04:bd:88:62:9a:70
[  185.828057] wlp2s0: send auth to 04:bd:88:62:9a:70 (try 1/3)
[  185.829047] wlp2s0: authenticated
[  185.833451] wlp2s0: associate with 04:bd:88:62:9a:70 (try 1/3)
[  185.834691] wlp2s0: RX AssocResp from 04:bd:88:62:9a:70 (capab=0x1011 status=0 aid=9)
[  185.834829] wlp2s0: associated
[  185.860666] ath: EEPROM regdomain: 0x8260
[  185.860673] ath: EEPROM indicates we should expect a country code
[  185.860677] ath: doing EEPROM country->regdmn map search
[  185.860682] ath: country maps to regdmn code: 0x52
[  185.860685] ath: Country alpha2 being used: PH
[  185.860689] ath: Regpair used: 0x52
[  185.860693] ath: regdomain 0x8260 dynamically updated by country IE
[  185.881609] wlp2s0: Limiting TX power to 26 (26 - 0) dBm as advertised by 04:bd:88:62:9a:70