[    0.000000] Linux version 4.6.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.0 20160609 (Debian 5.4.0-6) ) #1 SMP Debian 4.6.4-1 (2016-07-18)
[    0.000000] Command line: BOOT_IMAGE=(crypto0)/@/vmlinuz root=/dev/mapper/cryptdisk rootflags=subvol=@ ro quiet
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bff15fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bff16000-0x00000000bfffffff] type 16
[    0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000c29fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023c5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 4294CTO/4294CTO, BIOS CBET4000 4.5-499-g0575a4f 12/06/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x23c600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0C0000000 mask FE0000000 uncachable
[    0.000000]   1 base 0E0000000 mask FF0000000 write-combining
[    0.000000]   2 base 0F0000000 mask FF0000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0xbff16 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x01d36000, 0x01d36fff] PGTABLE
[    0.000000] BRK [0x01d37000, 0x01d37fff] PGTABLE
[    0.000000] BRK [0x01d38000, 0x01d38fff] PGTABLE
[    0.000000] BRK [0x01d39000, 0x01d39fff] PGTABLE
[    0.000000] BRK [0x01d3a000, 0x01d3afff] PGTABLE
[    0.000000] BRK [0x01d3b000, 0x01d3bfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35cd3000-0x36e60fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000BFF2A0E0 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000BFF2D660 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000BFF2A280 0033DC (v02 COREv4 COREBOOT 20110725 INTL 20160318)
[    0.000000] ACPI: FACS 0x00000000BFF2A240 000040
[    0.000000] ACPI: FACS 0x00000000BFF2A240 000040
[    0.000000] ACPI: SSDT 0x00000000BFF2D760 001569 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: MCFG 0x00000000BFF2ECD0 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: TCPA 0x00000000BFF2ED10 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x00000000BFF2ED50 00006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DMAR 0x00000000BFF2EDC0 0000A8 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000BFF2EE70 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023c5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x23c5f6000-0x23c5fafff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000023c5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x00000000bff15fff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000023c5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023c5fffff]
[    0.000000] On node 0 totalpages: 2080949
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 159 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12205 pages used for memmap
[    0.000000]   DMA32 zone: 781078 pages, LIFO batch:31
[    0.000000]   Normal zone: 20248 pages used for memmap
[    0.000000]   Normal zone: 1295872 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xc0a00000-0xc29fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbff16000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xc29fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc2a00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[    0.000000] e820: [mem 0xc2a00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 32 pages/cpu @ffff88023c200000 s93720 r8192 d29160 u524288
[    0.000000] pcpu-alloc: s93720 r8192 d29160 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2048273
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=(crypto0)/@/vmlinuz root=/dev/mapper/cryptdisk rootflags=subvol=@ ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8093704K/8323796K available (5932K kernel code, 1090K rwdata, 2700K rodata, 1336K init, 824K bss, 230092K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:456 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2494.232 MHz processor
[    0.000032] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.46 BogoMIPS (lpj=9976928)
[    0.000035] pid_max: default: 32768 minimum: 301
[    0.000044] ACPI: Core revision 20160108
[    0.002945] ACPI: 2 ACPI AML tables successfully acquired and loaded

[    0.002983] Security Framework initialized
[    0.002984] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.002992] AppArmor: AppArmor disabled by boot time parameter
[    0.003499] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.005138] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.005853] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.005864] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.006202] Disabling memory control group subsystem
[    0.006230] CPU: Physical Processor ID: 0
[    0.006231] CPU: Processor Core ID: 0
[    0.006237] mce: CPU supports 7 MCE banks
[    0.006249] CPU0: Thermal monitoring enabled (TM1)
[    0.006255] process: using mwait in idle threads
[    0.006258] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.006259] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.006646] Freeing SMP alternatives memory: 24K (ffffffff81c60000 - ffffffff81c66000)
[    0.008634] ftrace: allocating 24381 entries in 96 pages
[    0.019455] smpboot: Max logical packages: 2
[    0.019459] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.019463] DMAR: Host address width 36
[    0.019465] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.019475] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.019476] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.019480] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.019482] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.019483] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.019484] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.019819] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.019822] x2apic enabled
[    0.019828] Switched APIC routing to cluster x2apic.
[    0.020279] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.059970] TSC deadline timer enabled
[    0.059973] smpboot: CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.059995] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.060016] ... version:                3
[    0.060017] ... bit width:              48
[    0.060018] ... generic registers:      4
[    0.060019] ... value mask:             0000ffffffffffff
[    0.060020] ... max period:             0000ffffffffffff
[    0.060020] ... fixed-purpose events:   3
[    0.060021] ... event mask:             000000070000000f
[    0.060556] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.060654] x86: Booting SMP configuration:
[    0.060656] .... node  #0, CPUs:      #1 #2 #3
[    0.302124] x86: Booted up 1 node, 4 CPUs
[    0.302128] smpboot: Total of 4 processors activated (19957.13 BogoMIPS)
[    0.305422] devtmpfs: initialized
[    0.305490] x86/mm: Memory block size: 128MB
[    0.308204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.308269] pinctrl core: initialized pinctrl subsystem
[    0.308411] NET: Registered protocol family 16
[    0.317122] cpuidle: using governor ladder
[    0.322098] cpuidle: using governor menu
[    0.322240] ACPI: bus type PCI registered
[    0.322242] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.322325] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.322327] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.322337] PCI: Using configuration type 1 for base access
[    0.322361] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.330317] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.330568] ACPI: Added _OSI(Module Device)
[    0.330569] ACPI: Added _OSI(Processor Device)
[    0.330570] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.330571] ACPI: Added _OSI(Processor Aggregator Device)
[    0.330792] ACPI: Executed 1 blocks of module-level executable AML code
[    0.332651] ACPI : EC: EC started
[    0.332696] ACPI: Interpreter enabled
[    0.332711] ACPI: (supports S0 S3 S4 S5)
[    0.332712] ACPI: Using IOAPIC for interrupt routing
[    0.332734] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.336973] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.336977] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.337026] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.337034] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.337231] PCI host bridge to bus 0000:00
[    0.337234] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.337236] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.337237] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.337239] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.337240] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.337242] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.337243] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.337245] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.337246] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.337248] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.337249] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.337251] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.337253] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.337254] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.337255] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.337257] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.337259] pci_bus 0000:00: root bus resource [mem 0xc2a00000-0xf7ffffff window]
[    0.337260] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.337262] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.337269] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.337357] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[    0.337366] pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf13fffff 64bit]
[    0.337372] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.337376] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.337452] pci 0000:00:04.0: [8086:0103] type 00 class 0x118000
[    0.337460] pci 0000:00:04.0: reg 0x10: [mem 0xf1620000-0xf1627fff 64bit]
[    0.337562] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.337577] pci 0000:00:19.0: reg 0x10: [mem 0xf1600000-0xf161ffff]
[    0.337586] pci 0000:00:19.0: reg 0x14: [mem 0xf162c000-0xf162cfff]
[    0.337595] pci 0000:00:19.0: reg 0x18: [io  0x3040-0x305f]
[    0.337654] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.337725] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.337743] pci 0000:00:1a.0: reg 0x10: [mem 0xf162e000-0xf162e3ff]
[    0.337826] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.337863] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.337907] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.337925] pci 0000:00:1b.0: reg 0x10: [mem 0xf1628000-0xf162bfff 64bit]
[    0.337997] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.338036] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.338078] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.338151] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.338229] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.338308] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.338385] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.338462] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.338542] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.338666] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.338753] pci 0000:00:1c.5: [8086:1c1c] type 01 class 0x060400
[    0.338866] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.338951] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.338970] pci 0000:00:1d.0: reg 0x10: [mem 0xf162f000-0xf162f3ff]
[    0.339053] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.339089] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.339130] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[    0.339296] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.339313] pci 0000:00:1f.2: reg 0x10: [io  0x3080-0x3087]
[    0.339322] pci 0000:00:1f.2: reg 0x14: [io  0x3090-0x3093]
[    0.339330] pci 0000:00:1f.2: reg 0x18: [io  0x3088-0x308f]
[    0.339339] pci 0000:00:1f.2: reg 0x1c: [io  0x3094-0x3097]
[    0.339348] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.339356] pci 0000:00:1f.2: reg 0x24: [mem 0xf162d000-0xf162d7ff]
[    0.339401] pci 0000:00:1f.2: PME# supported from D3hot
[    0.339469] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.339485] pci 0000:00:1f.3: reg 0x10: [mem 0xf1630000-0xf16300ff 64bit]
[    0.339506] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.339634] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.339719] pci 0000:02:00.0: [168c:0034] type 00 class 0x028000
[    0.339762] pci 0000:02:00.0: reg 0x10: [mem 0xf1400000-0xf147ffff 64bit]
[    0.339846] pci 0000:02:00.0: reg 0x30: [mem 0xf1480000-0xf148ffff pref]
[    0.339959] pci 0000:02:00.0: supports D1 D2
[    0.339960] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.345180] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.345196] pci 0000:00:1c.1:   bridge window [mem 0xf1400000-0xf14fffff]
[    0.345313] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.345317] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.345322] pci 0000:00:1c.3:   bridge window [mem 0xf0800000-0xf0ffffff]
[    0.345328] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[    0.345427] pci 0000:04:00.0: [1180:e823] type 00 class 0x080501
[    0.345461] pci 0000:04:00.0: MMC controller base frequency changed to 50Mhz.
[    0.345499] pci 0000:04:00.0: reg 0x10: [mem 0xf1500000-0xf15000ff]
[    0.345799] pci 0000:04:00.0: supports D1 D2
[    0.345801] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.353186] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.353202] pci 0000:00:1c.4:   bridge window [mem 0xf1500000-0xf15fffff]
[    0.353303] pci 0000:00:1c.5: PCI bridge to [bus 05]
[    0.353440] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.353489] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.353535] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.353580] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.353625] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.353669] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.353713] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.353758] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.354410] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.354458] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[    0.354545] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.354547] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.354549] vgaarb: loaded
[    0.354550] vgaarb: bridge control possible 0000:00:02.0
[    0.354644] PCI: Using ACPI for IRQ routing
[    0.356088] PCI: pci_cache_line_size set to 64 bytes
[    0.356152] e820: reserve RAM buffer [mem 0xbff16000-0xbfffffff]
[    0.356154] e820: reserve RAM buffer [mem 0x23c600000-0x23fffffff]
[    0.356326] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.356331] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.358357] clocksource: Switched to clocksource hpet
[    0.364234] VFS: Disk quotas dquot_6.6.0
[    0.364261] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.364403] pnp: PnP ACPI init
[    0.364502] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.364505] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.364506] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.364508] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.364510] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.364511] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.364513] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.364515] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.364517] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
[    0.364518] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
[    0.364522] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.365025] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.365028] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.365070] system 00:02: [io  0x0500-0x057f] could not be reserved
[    0.365072] system 00:02: [io  0x0480-0x04bf] has been reserved
[    0.365074] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.365097] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.365132] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.365160] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.365176] pnp: PnP ACPI: found 6 devices
[    0.371771] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.371828] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.371842] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.371848] pci 0000:00:1c.1:   bridge window [mem 0xf1400000-0xf14fffff]
[    0.371856] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.371859] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.371865] pci 0000:00:1c.3:   bridge window [mem 0xf0800000-0xf0ffffff]
[    0.371869] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[    0.371876] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.371883] pci 0000:00:1c.4:   bridge window [mem 0xf1500000-0xf15fffff]
[    0.371895] pci 0000:00:1c.5: PCI bridge to [bus 05]
[    0.371913] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.371914] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.371916] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.371917] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.371919] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.371920] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.371922] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.371923] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.371925] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.371926] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.371928] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.371929] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.371930] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.371932] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.371933] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.371935] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.371936] pci_bus 0000:00: resource 20 [mem 0xc2a00000-0xf7ffffff window]
[    0.371938] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[    0.371940] pci_bus 0000:02: resource 1 [mem 0xf1400000-0xf14fffff]
[    0.371941] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.371943] pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf0ffffff]
[    0.371944] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf07fffff 64bit pref]
[    0.371946] pci_bus 0000:04: resource 1 [mem 0xf1500000-0xf15fffff]
[    0.372004] NET: Registered protocol family 2
[    0.372181] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.372316] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.372447] TCP: Hash tables configured (established 65536 bind 65536)
[    0.372475] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.372503] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.372590] NET: Registered protocol family 1
[    0.372608] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.373017] PCI: CLS 64 bytes, default 64
[    0.373068] Unpacking initramfs...
[    0.690631] Freeing initrd memory: 17976K (ffff880035cd3000 - ffff880036e61000)
[    0.690711] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.690714] software IO TLB [mem 0xbbf16000-0xbff16000] (64MB) mapped at [ffff8800bbf16000-ffff8800bff15fff]
[    0.690767] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    0.690768] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    0.690769] RAPL PMU: hw unit of domain package 2^-16 Joules
[    0.690770] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    0.691156] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.691190] audit: initializing netlink subsys (disabled)
[    0.691206] audit: type=2000 audit(1481032818.692:1): initialized
[    0.691642] Initialise system trusted keyring
[    0.691740] workingset: timestamp_bits=37 max_order=21 bucket_order=0
[    0.691760] zbud: loaded
[    0.739053] Key type asymmetric registered
[    0.739057] Asymmetric key parser 'x509' registered
[    0.739080] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.739113] io scheduler noop registered
[    0.739116] io scheduler deadline registered
[    0.739130] io scheduler cfq registered (default)
[    0.739942] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.739948] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.739969] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.739971] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.739975] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.739999] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.740004] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.740029] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    0.740030] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    0.740035] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    0.740060] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[    0.740065] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[    0.740072] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.740085] pciehp 0000:00:1c.3:pcie04: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.740114] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
[    0.740119] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.740140] intel_idle: MWAIT substates: 0x21120
[    0.740141] intel_idle: v0.4.1 model 0x2A
[    0.740291] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.740315] GHES: HEST is not enabled!
[    0.740380] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.740776] Linux agpgart interface v0.103
[    0.740826] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.740827] AMD IOMMUv2 functionality not available on this system
[    0.741175] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.745853] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.745858] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.745987] mousedev: PS/2 mouse device common for all mice
[    0.746030] rtc_cmos 00:03: RTC can wake from S4
[    0.746154] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.746182] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.746193] Intel P-state driver initializing.
[    0.751027] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.802620] ledtrig-cpu: registered to indicate activity on CPUs
[    0.803550] NET: Registered protocol family 10
[    0.804042] mip6: Mobile IPv6
[    0.804050] NET: Registered protocol family 17
[    0.804062] mpls_gso: MPLS GSO support
[    0.804675] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
[    0.804698] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29
[    0.804719] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29
[    0.804734] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
[    0.804883] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.805469] registered taskstats version 1
[    0.805526] Loading compiled-in X.509 certificates
[    0.809266] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    0.810186] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    0.810251] zswap: loaded using pool lzo/zbud
[    0.811339] rtc_cmos 00:03: setting system clock to 2016-12-06 14:00:19 UTC (1481032819)
[    0.811549] PM: Hibernation image not present or could not be loaded.
[    0.815212] Freeing unused kernel memory: 1336K (ffffffff81b12000 - ffffffff81c60000)
[    0.815216] Write protecting the kernel read-only data: 10240k
[    0.815752] Freeing unused kernel memory: 196K (ffff8800015cf000 - ffff880001600000)
[    0.824138] Freeing unused kernel memory: 1396K (ffff8800018a3000 - ffff880001a00000)
[    0.842182] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.951368] random: systemd-udevd urandom read with 1 bits of entropy available
[    0.992413] fjes: module verification failed: signature and/or required key missing - tainting kernel
[    0.992932] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.002153] pps_core: LinuxPPS API ver. 1 registered
[    1.002157] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.002462] PTP clock support registered
[    1.004040] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.004044] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.004142] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.004433] ACPI: bus type USB registered
[    1.004475] usbcore: registered new interface driver usbfs
[    1.004497] usbcore: registered new interface driver hub
[    1.004534] usbcore: registered new device driver usb
[    1.005310] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.005557] ehci-pci: EHCI PCI platform driver
[    1.005739] sdhci: Secure Digital Host Controller Interface driver
[    1.005741] sdhci: Copyright(c) Pierre Ossman
[    1.006093] sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e823] (rev 4)
[    1.013648] SCSI subsystem initialized
[    1.015357] thermal LNXTHERM:00: registered as thermal_zone0
[    1.015361] ACPI: Thermal Zone [THM0] (60 C)
[    1.016982] mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA
[    1.017129] AVX version of gcm_enc/dec engaged.
[    1.017132] AES CTR mode by8 optimization enabled
[    1.017614] thermal LNXTHERM:01: registered as thermal_zone1
[    1.017618] ACPI: Thermal Zone [THM1] (27 C)
[    1.017701] libata version 3.00 loaded.
[    1.038644] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[    1.265851] e1000e 0000:00:19.0 eth0: registered PHC clock
[    1.265858] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:c9:0a:e5
[    1.265862] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.265917] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[    1.266184] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.266194] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.266209] ehci-pci 0000:00:1a.0: debug port 2
[    1.266904] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    1.270136] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.270194] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf162e000
[    1.278542] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.278639] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.278642] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.278644] usb usb1: Product: EHCI Host Controller
[    1.278645] usb usb1: Manufacturer: Linux 4.6.0-1-amd64 ehci_hcd
[    1.278647] usb usb1: SerialNumber: 0000:00:1a.0
[    1.278868] hub 1-0:1.0: USB hub found
[    1.278879] hub 1-0:1.0: 3 ports detected
[    1.279308] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.279318] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.279336] ehci-pci 0000:00:1d.0: debug port 2
[    1.284418] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.284473] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf162f000
[    1.294454] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.294562] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.294565] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.294567] usb usb2: Product: EHCI Host Controller
[    1.294570] usb usb2: Manufacturer: Linux 4.6.0-1-amd64 ehci_hcd
[    1.294572] usb usb2: SerialNumber: 0000:00:1d.0
[    1.294840] hub 2-0:1.0: USB hub found
[    1.294852] hub 2-0:1.0: 3 ports detected
[    1.297131] ahci 0000:00:1f.2: version 3.0
[    1.297366] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.307476] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[    1.307482] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    1.308880] scsi host0: ahci
[    1.309063] scsi host1: ahci
[    1.309171] scsi host2: ahci
[    1.309270] scsi host3: ahci
[    1.309366] scsi host4: ahci
[    1.309500] scsi host5: ahci
[    1.309549] ata1: SATA max UDMA/133 abar m2048@0xf162d000 port 0xf162d100 irq 32
[    1.309552] ata2: SATA max UDMA/133 abar m2048@0xf162d000 port 0xf162d180 irq 32
[    1.309555] ata3: SATA max UDMA/133 abar m2048@0xf162d000 port 0xf162d200 irq 32
[    1.309556] ata4: DUMMY
[    1.309556] ata5: DUMMY
[    1.309557] ata6: DUMMY
[    1.590534] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.606512] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.622367] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.624444] ata1.00: supports DRM functions and may not be fully accessible
[    1.624627] ata1.00: disabling queued TRIM support
[    1.624634] ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0DB6Q, max UDMA/133
[    1.624639] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.625008] ata1.00: supports DRM functions and may not be fully accessible
[    1.625268] ata1.00: disabling queued TRIM support
[    1.625281] ata1.00: configured for UDMA/133
[    1.625839] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 840  DB6Q PQ: 0 ANSI: 5
[    1.690531] tsc: Refined TSC clocksource calibration: 2494.333 MHz
[    1.690542] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f45085418, max_idle_ns: 440795285711 ns
[    1.723232] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.723242] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.723907] hub 1-1:1.0: USB hub found
[    1.724022] hub 1-1:1.0: 6 ports detected
[    1.739078] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.739088] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.739785] hub 2-1:1.0: USB hub found
[    1.739913] hub 2-1:1.0: 8 ports detected
[    1.958463] ata2: SATA link down (SStatus 0 SControl 300)
[    1.994555] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[    1.999350] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[    2.010551] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[    2.088244] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016
[    2.088253] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.088257] usb 1-1.3: Product: Biometric Coprocessor
[    2.088260] usb 1-1.3: Manufacturer: UPEK
[    2.091803] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00/0x0, board id: 1611, fw id: 774180
[    2.091826] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    2.104889] usb 2-1.3: string descriptor 0 read error: -22
[    2.104967] usb 2-1.3: New USB device found, idVendor=04ca, idProduct=3006
[    2.104972] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.150335] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    2.158551] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[    2.174565] usb 2-1.4: new high-speed USB device number 4 using ehci-pci
[    2.257369] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b217
[    2.257380] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.257384] usb 1-1.6: Product: Integrated Camera
[    2.257388] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[    2.270249] ata3: SATA link down (SStatus 0 SControl 300)
[    2.275551] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    2.275650] sd 0:0:0:0: [sda] Write Protect is off
[    2.275656] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.275712] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.277998]  sda: sda1 sda2
[    2.278526] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.281283] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=190d
[    2.281289] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.281293] usb 2-1.4: Product: F5521gw
[    2.281295] usb 2-1.4: Manufacturer: Ericsson
[    2.281298] usb 2-1.4: SerialNumber: 1B6D288CB004B6B0
[    2.371884] device-mapper: uevent: version 1.0.3
[    2.372015] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    2.386489] usb 2-1.5: new full-speed USB device number 5 using ehci-pci
[    2.480651] usb 2-1.5: New USB device found, idVendor=056a, idProduct=00e6
[    2.480654] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.480656] usb 2-1.5: Product: ISD-V4
[    2.480658] usb 2-1.5: Manufacturer: Tablet
[    2.483138] hidraw: raw HID events driver (C) Jiri Kosina
[    2.494182] usbcore: registered new interface driver usbhid
[    2.494185] usbhid: USB HID core driver
[    2.495121] input: Wacom ISDv4 E6 Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:056A:00E6.0001/input/input4
[    2.495499] wacom 0003:056A:00E6.0001: hidraw0: USB HID v1.11 Device [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input0
[    2.495763] input: Wacom ISDv4 E6 Finger as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:056A:00E6.0002/input/input8
[    2.495935] wacom 0003:056A:00E6.0002: hidraw1: USB HID v1.11 Mouse [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input1
[    2.690538] clocksource: Switched to clocksource tsc
[    2.969045] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    3.263281] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
[    5.034907] NET: Registered protocol family 38
[    8.542694] raid6: sse2x1   gen()  7785 MB/s
[    8.610696] raid6: sse2x1   xor()  6468 MB/s
[    8.678695] raid6: sse2x2   gen() 10581 MB/s
[    8.746701] raid6: sse2x2   xor()  7713 MB/s
[    8.814702] raid6: sse2x4   gen() 12309 MB/s
[    8.882707] raid6: sse2x4   xor()  9089 MB/s
[    8.882709] raid6: using algorithm sse2x4 gen() 12309 MB/s
[    8.882709] raid6: .... xor() 9089 MB/s, rmw enabled
[    8.882710] raid6: using ssse3x2 recovery algorithm
[    8.883079] xor: automatically using best checksumming function:
[    8.922704]    avx       : 21053.000 MB/sec
[    8.926055] Btrfs loaded
[    8.932900] BTRFS: device fsid af0b59fd-001b-450c-bce0-009469440833 devid 1 transid 58826 /dev/mapper/cryptdisk
[    8.941197] BTRFS info (device dm-0): disk space caching is enabled
[    8.941200] BTRFS: has skinny extents
[    9.079695] BTRFS: detected SSD devices, enabling SSD mode
[    9.414253] ip_tables: (C) 2000-2006 Netfilter Core Team
[    9.435567] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    9.435743] systemd[1]: Detected architecture x86-64.
[    9.436040] systemd[1]: Set hostname to <cornaLaptop>.
[    9.560696] systemd[1]: snapper-cleanup.timer: Cannot add dependency job, ignoring: Unit snapper-cleanup.timer is masked.
[    9.560714] systemd[1]: snapper-timeline.timer: Cannot add dependency job, ignoring: Unit snapper-timeline.timer is masked.
[    9.560736] systemd[1]: dm-event.socket: Cannot add dependency job, ignoring: Unit dm-event.socket is masked.
[    9.560892] systemd[1]: iodined.service: Cannot add dependency job, ignoring: Unit iodined.service is masked.
[    9.561731] systemd[1]: Reached target Swap.
[    9.561819] systemd[1]: Reached target User and Group Name Lookups.
[    9.561890] systemd[1]: Listening on Journal Socket.
[    9.561947] systemd[1]: Listening on Journal Socket (/dev/log).
[    9.562123] systemd[1]: Created slice User and Session Slice.
[    9.562171] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    9.562331] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    9.562374] systemd[1]: Listening on Syslog Socket.
[    9.562430] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    9.562477] systemd[1]: Listening on udev Control Socket.
[    9.562525] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    9.562617] systemd[1]: Listening on Journal Audit Socket.
[    9.562664] systemd[1]: Listening on udev Kernel Socket.
[    9.562702] systemd[1]: Listening on RPCbind Server Activation Socket.
[    9.562855] systemd[1]: Created slice System Slice.
[    9.575078] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    9.575908] systemd[1]: Mounting Huge Pages File System...
[    9.576588] systemd[1]: Mounting RPC Pipe File System...
[    9.577563] systemd[1]: Starting Journal Service...
[    9.577816] systemd[1]: Created slice system-getty.slice.
[    9.578445] systemd[1]: Starting Remount Root and Kernel File Systems...
[    9.578489] systemd[1]: Reached target Slices.
[    9.581497] systemd[1]: Starting Load Kernel Modules...
[    9.582453] systemd[1]: Mounting POSIX Message Queue File System...
[    9.586432] systemd[1]: Starting Set the console keyboard layout...
[    9.586524] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[    9.587071] systemd[1]: Mounting Temporary Directory...
[    9.587748] systemd[1]: Mounting Debug File System...
[    9.592039] BTRFS info (device dm-0): use lzo compression
[    9.592044] BTRFS info (device dm-0): turning on discard
[    9.592046] BTRFS info (device dm-0): disk space caching is enabled
[    9.593075] systemd[1]: Starting Uncomplicated firewall...
[    9.593315] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[    9.594709] systemd[1]: Mounted Temporary Directory.
[    9.594768] systemd[1]: Mounted Debug File System.
[    9.594798] systemd[1]: Mounted POSIX Message Queue File System.
[    9.594822] systemd[1]: Mounted Huge Pages File System.
[    9.595072] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    9.595909] systemd[1]: Started Remount Root and Kernel File Systems.
[    9.597052] systemd[1]: Starting Load/Save Random Seed...
[    9.598321] systemd[1]: Starting udev Coldplug all Devices...
[    9.598998] systemd[1]: Starting Create Static Device Nodes in /dev...
[    9.600982] lp: driver loaded but no devices found
[    9.602295] RPC: Registered named UNIX socket transport module.
[    9.602299] RPC: Registered udp transport module.
[    9.602300] RPC: Registered tcp transport module.
[    9.602301] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    9.603160] systemd[1]: Mounted RPC Pipe File System.
[    9.607472] ppdev: user-space parallel port driver
[    9.614372] systemd[1]: Started Load/Save Random Seed.
[    9.623653] thinkpad_ec: thinkpad_ec 0.42 loaded.
[    9.624453] hdaps: LENOVO ThinkPad X220 detected, setting orientation 4
[    9.624556] hdaps: initial mode latch is 0x05
[    9.624682] hdaps: setting ec_rate=250, filter_order=2
[    9.624897] hdaps: device successfully initialized.
[    9.624972] input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input10
[    9.625023] input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input11
[    9.625025] hdaps: driver successfully loaded.
[    9.625629] systemd[1]: Started Load Kernel Modules.
[    9.643100] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[    9.648649] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    9.650936] systemd[1]: Starting Apply Kernel Variables...
[    9.651332] systemd[1]: Started Journal Service.
[    9.660699] systemd-journald[314]: Received request to flush runtime journal from PID 1
[    9.762004] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input12
[    9.764462] ACPI: Sleep Button [SLPB]
[    9.764532] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input13
[    9.764737] ACPI: Lid Switch [LID]
[    9.764799] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input14
[    9.764856] ACPI: Power Button [PWRF]
[    9.772869] ACPI: AC Adapter [AC] (on-line)
[    9.777644] Non-volatile memory driver v1.3
[    9.780358] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    9.780361] thinkpad_acpi: http://ibm-acpi.sf.net/
[    9.780363] thinkpad_acpi: ThinkPad BIOS CBET4000 4.5-499-g0575a4f, EC 8DHT34WW-3.20
[    9.780364] thinkpad_acpi: Lenovo ThinkPad X220 Tablet, model 4294CTO
[    9.780699] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    9.780702] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    9.783633] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.791176] ACPI: Battery Slot [BAT0] (battery present)
[    9.791318] ACPI: Battery Slot [BAT1] (battery absent)
[    9.794354] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    9.794455] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    9.795343] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input15
[    9.803028] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20160108/utaddress-255)
[    9.803037] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.803041] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160108/utaddress-255)
[    9.803045] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.803047] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160108/utaddress-255)
[    9.803051] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.803052] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160108/utaddress-255)
[    9.803056] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.803057] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    9.803114] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    9.819444] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    9.823395] [drm] Initialized drm 1.1.0 20060810
[    9.824495] input: PC Speaker as /devices/platform/pcspkr/input/input16
[    9.850245] [drm] Memory usable by graphics device = 2048M
[    9.850249] [drm] Replacing VGA console driver
[    9.850989] Console: switching to colour dummy device 80x25
[    9.850990] intel_rapl: Found RAPL domain package
[    9.850991] intel_rapl: Found RAPL domain core
[    9.850991] intel_rapl: Found RAPL domain uncore
[    9.857545] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
[    9.858006] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[    9.858009] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.858011] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[    9.858012] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[    9.858016] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[    9.858019] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x23
[    9.858021] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x1b
[    9.858022] snd_hda_codec_conexant hdaudioC0D0:      Dock Mic=0x1a
[    9.861424] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[    9.866675] ath: phy0: ASPM enabled: 0x43
[    9.866679] ath: EEPROM regdomain: 0x6a
[    9.866680] ath: EEPROM indicates we should expect a direct regpair map
[    9.866682] ath: Country alpha2 being used: 00
[    9.866683] ath: Regpair used: 0x6a
[    9.897538] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    9.897930] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[    9.898001] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[    9.898078] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[    9.898173] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[    9.898482] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[    9.898551] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[    9.898616] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24
[    9.902015] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    9.902297] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90001300000, irq=17
[    9.910826] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    9.910829] [drm] Driver supports precise vblank timestamp query.
[    9.911087] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    9.959824] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    9.961922] acpi device:03: registered as cooling_device5
[    9.962423] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input25
[    9.962939] [drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on minor 0
[   10.031972] iTCO_vendor_support: vendor-support=0
[   10.032976] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   10.033022] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0560)
[   10.034155] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   10.072075] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[   10.154767] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[   10.379568] systemd[1]: apt-daily.timer: Adding 9h 13min 46.210362s random time.
[   10.476092] fbcon: inteldrmfb (fb0) is primary device
[   10.502794] systemd[1]: apt-daily.timer: Adding 1h 1min 44.008791s random time.
[   11.371625] media: Linux media interface: v0.10
[   11.373659] Bluetooth: Core ver 2.21
[   11.373678] NET: Registered protocol family 31
[   11.373679] Bluetooth: HCI device and connection manager initialized
[   11.373684] Bluetooth: HCI socket layer initialized
[   11.373688] Bluetooth: L2CAP socket layer initialized
[   11.373696] Bluetooth: SCO socket layer initialized
[   11.378472] Linux video capture interface: v2.00
[   11.440002] usbcore: registered new interface driver btusb
[   11.443159] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
[   11.443631] usb 2-1.3: firmware: direct-loading firmware ar3k/AthrBT_0x11020000.dfu
[   11.444981] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[   11.444989] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[   11.444992] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[   11.445229] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input26
[   11.445442] usbcore: registered new interface driver uvcvideo
[   11.445443] USB Video Class driver (1.1.1)
[   11.483398] usb 2-1.3: firmware: direct-loading firmware ar3k/ramps_0x11020000_40.dfu
[   11.487622] usbcore: registered new interface driver ath3k
[   11.527043] usb 2-1.3: USB disconnect, device number 3
[   11.691451] Console: switching to colour frame buffer device 170x48
[   11.726943] usb 2-1.3: new full-speed USB device number 6 using ehci-pci
[   11.821231] usb 2-1.3: string descriptor 0 read error: -22
[   11.821239] usb 2-1.3: New USB device found, idVendor=04ca, idProduct=3006
[   11.821242] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   12.148002] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   12.418154] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   12.426646] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   12.426650] Bluetooth: BNEP filters: protocol multicast
[   12.426655] Bluetooth: BNEP socket layer initialized
[   12.671238] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   12.676331] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   12.688022] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   12.711044] random: nonblocking pool is initialized
[   12.714762] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   12.715734] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[   12.715790] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[   12.715813] usbcore: registered new interface driver cdc_wdm
[   12.716980] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[   12.718548] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[   12.719532] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[   12.724921] usbcore: registered new interface driver cdc_acm
[   12.724925] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   12.752023] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[   12.752602] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[   12.752643] usbcore: registered new interface driver cdc_ncm
[   12.753801] usbcore: registered new interface driver cdc_mbim
[   12.755499] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[   12.808298] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2
[   12.808306] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2
[   12.808309] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2
[   12.808312] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2
[   12.808315] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2
[   12.821196] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   12.860484] Ebtables v2.0 registered
[   12.971208] tp_smapi 0.42 loading...
[   12.971218] SMAPI not supported (ID=0x1)
[   12.971220] tp_smapi init failed (ret=-6)!
[   13.036422] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[   13.048544] tp_smapi 0.42 loading...
[   13.048553] SMAPI not supported (ID=0x1)
[   13.048556] tp_smapi init failed (ret=-6)!
[   13.093007] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[   13.115710] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[   13.118568] tun: Universal TUN/TAP device driver, 1.6
[   13.118572] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   13.179110] virbr0: port 1(virbr0-nic) entered blocking state
[   13.179116] virbr0: port 1(virbr0-nic) entered disabled state
[   13.179259] device virbr0-nic entered promiscuous mode
[   13.295477] virbr0: port 1(virbr0-nic) entered blocking state
[   13.295482] virbr0: port 1(virbr0-nic) entered listening state
[   13.330493] virbr0: port 1(virbr0-nic) entered disabled state
[   13.441944] systemd[1]: apt-daily.timer: Adding 9h 58min 8.443443s random time.
[   13.702581] systemd[1]: apt-daily.timer: Adding 1h 39min 1.260661s random time.
[   14.253742] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[   14.254738] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[   14.693288] Bluetooth: RFCOMM TTY layer initialized
[   14.693296] Bluetooth: RFCOMM socket layer initialized
[   14.693301] Bluetooth: RFCOMM ver 1.11
[   18.857500] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   18.912246] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   18.929663] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   18.949799] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   18.958047] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   18.973825] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   18.999824] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   19.012822] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   19.028484] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   21.531808] fuse init (API version 7.24)
[   25.378956] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   25.714496] wlp2s0: authenticate with dc:eb:94:4e:d5:52
[   25.725895] wlp2s0: send auth to dc:eb:94:4e:d5:52 (try 1/3)
[   25.727608] wlp2s0: authenticated
[   25.731393] wlp2s0: associate with dc:eb:94:4e:d5:52 (try 1/3)
[   25.735164] wlp2s0: RX AssocResp from dc:eb:94:4e:d5:52 (capab=0x431 status=0 aid=14)
[   25.735268] wlp2s0: associated
[   25.735281] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   25.750234] ath: EEPROM regdomain: 0x817c
[   25.750238] ath: EEPROM indicates we should expect a country code
[   25.750239] ath: doing EEPROM country->regdmn map search
[   25.750241] ath: country maps to regdmn code: 0x37
[   25.750242] ath: Country alpha2 being used: IT
[   25.750243] ath: Regpair used: 0x37
[   25.750245] ath: regdomain 0x817c dynamically updated by country IE
[   25.871322] wlp2s0: Limiting TX power to 15 dBm as advertised by dc:eb:94:4e:d5:52
[   26.470051] systemd[1]: apt-daily.timer: Adding 1h 1min 24.651326s random time.
[   26.733242] systemd[1]: apt-daily.timer: Adding 10h 38min 40.307437s random time.
[   30.866026] ------------[ cut here ]------------
[   30.866051] WARNING: CPU: 2 PID: 0 at /build/linux-aOJbQa/linux-4.6.4/net/core/skbuff.c:4271 skb_try_coalesce+0x3f2/0x420
[   30.866057] Modules linked in: ctr(E) ccm(E) fuse(E) rfcomm(E) xt_CHECKSUM(E) iptable_mangle(E) ipt_MASQUERADE(E) nf_nat_masquerade_ipv4(E) iptable_nat(E) nf_nat_ipv4(E) tun(E) acpi_call(OE) bridge(E) stp(E) llc(E) ebtable_filter(E) ebtables(E) cdc_mbim(E) cdc_ncm(E) usbnet(E) mii(E) cdc_acm(E) cdc_wdm(E) cmac(E) ecb(E) bnep(E) ath3k(E) uvcvideo(E) videobuf2_vmalloc(E) videobuf2_memops(E) videobuf2_v4l2(E) videobuf2_core(E) btusb(E) btrtl(E) btbcm(E) btintel(E) videodev(E) media(E) bluetooth(E) crc16(E) cpufreq_userspace(E) cpufreq_stats(E) cpufreq_powersave(E) cpufreq_conservative(E) iTCO_wdt(E) iTCO_vendor_support(E) binfmt_misc(E) arc4(E) snd_hda_codec_hdmi(E) snd_hda_codec_conexant(E) snd_hda_codec_generic(E) ath9k(E) intel_rapl(E) ath9k_common(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) coretemp(E)
[   30.866159]  i915(E) ath9k_hw(E) kvm_intel(E) ath(E) snd_hda_intel(E) drm_kms_helper(E) kvm(E) mac80211(E) irqbypass(E) pcspkr(E) serio_raw(E) snd_hda_codec(E) i2c_i801(E) snd_hda_core(E) lpc_ich(E) sg(E) cfg80211(E) mfd_core(E) snd_hwdep(E) drm(E) snd_pcm(E) i2c_algo_bit(E) snd_timer(E) shpchp(E) thinkpad_acpi(E) nvram(E) snd(E) soundcore(E) rfkill(E) battery(E) ac(E) tpm_tis(E) video(E) button(E) processor(E) evdev(E) joydev(E) ip6t_REJECT(E) nf_reject_ipv6(E) nf_log_ipv6(E) xt_hl(E) ip6t_rt(E) nf_conntrack_ipv6(E) nf_defrag_ipv6(E) ipt_REJECT(E) nf_reject_ipv4(E) nf_log_ipv4(E) nf_log_common(E) xt_LOG(E) xt_limit(E) xt_tcpudp(E) xt_addrtype(E) nf_conntrack_ipv4(E) nf_defrag_ipv4(E) xt_conntrack(E) ip6table_filter(E) ip6_tables(E) nf_conntrack_netbios_ns(E) nf_conntrack_broadcast(E) nf_nat_ftp(E)
[   30.866259]  nf_nat(E) nf_conntrack_ftp(E) nf_conntrack(E) iptable_filter(E) hdaps(OE) thinkpad_ec(OE) tpm_rng(E) tpm(E) rng_core(E) parport_pc(E) ppdev(E) sunrpc(E) lp(E) parport(E) ip_tables(E) x_tables(E) autofs4(E) btrfs(E) crc32c_generic(E) xor(E) raid6_pq(E) algif_skcipher(E) af_alg(E) wacom(E) usbhid(E) hid(E) dm_crypt(E) dm_mod(E) sd_mod(E) crct10dif_pclmul(E) crc32_pclmul(E) crc32c_intel(E) ghash_clmulni_intel(E) jitterentropy_rng(E) hmac(E) drbg(E) ansi_cprng(E) ahci(E) libahci(E) aesni_intel(E) libata(E) aes_x86_64(E) lrw(E) gf128mul(E) glue_helper(E) ablk_helper(E) cryptd(E) scsi_mod(E) psmouse(E) sdhci_pci(E) sdhci(E) ehci_pci(E) ehci_hcd(E) mmc_core(E) e1000e(E) usbcore(E) ptp(E) usb_common(E) pps_core(E) thermal(E) fjes(E)
[   30.866372] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G           OE   4.6.0-1-amd64 #1 Debian 4.6.4-1
[   30.866378] Hardware name: LENOVO 4294CTO/4294CTO, BIOS CBET4000 4.5-499-g0575a4f 12/06/2016
[   30.866384]  0000000000000286 a6c93574d1739b07 ffffffff81311505 0000000000000000
[   30.866394]  0000000000000000 ffffffff8107a50e ffff8800b2d7b800 ffff8800b2d79e00
[   30.866402]  0000000000000558 ffff88023c30394c 0000000000000362 ffff8801fd469780
[   30.866411] Call Trace:
[   30.866416]  <IRQ>  [<ffffffff81311505>] ? dump_stack+0x5c/0x77
[   30.866440]  [<ffffffff8107a50e>] ? __warn+0xbe/0xe0
[   30.866449]  [<ffffffff814b8922>] ? skb_try_coalesce+0x3f2/0x420
[   30.866459]  [<ffffffff8151764f>] ? tcp_try_coalesce+0x5f/0xc0
[   30.866467]  [<ffffffff815181f2>] ? tcp_queue_rcv+0x52/0x120
[   30.866476]  [<ffffffff8151ec68>] ? tcp_rcv_established+0x448/0x770
[   30.866487]  [<ffffffff815296b3>] ? tcp_v4_do_rcv+0x133/0x1f0
[   30.866496]  [<ffffffff8152a7b0>] ? tcp_v4_rcv+0x820/0x9c0
[   30.866511]  [<ffffffffc04b0b54>] ? ipv4_confirm+0x74/0xf0 [nf_conntrack_ipv4]
[   30.866521]  [<ffffffff81504dcb>] ? ip_local_deliver_finish+0x8b/0x1c0
[   30.866529]  [<ffffffff8150509b>] ? ip_local_deliver+0x6b/0xf0
[   30.866537]  [<ffffffff81504d40>] ? ip_rcv_finish+0x390/0x390
[   30.866546]  [<ffffffff8150539c>] ? ip_rcv+0x27c/0x3b0
[   30.866554]  [<ffffffff815049b0>] ? inet_del_offload+0x40/0x40
[   30.866563]  [<ffffffff814c6eaa>] ? __netif_receive_skb_core+0x50a/0xa40
[   30.866573]  [<ffffffff814c745f>] ? netif_receive_skb_internal+0x2f/0xa0
[   30.866638]  [<ffffffffc07fa837>] ? ieee80211_deliver_skb+0x137/0x190 [mac80211]
[   30.866690]  [<ffffffffc07fc71f>] ? ieee80211_rx_handlers+0xa8f/0x24f0 [mac80211]
[   30.866740]  [<ffffffffc07fe595>] ? ieee80211_prepare_and_rx_handle+0x1d5/0xaa0 [mac80211]
[   30.866754]  [<ffffffff814b240e>] ? __kmalloc_reserve.isra.33+0x2e/0x80
[   30.866802]  [<ffffffffc07ff131>] ? ieee80211_rx_napi+0x2d1/0x860 [mac80211]
[   30.866819]  [<ffffffffc09e9482>] ? ath_rx_tasklet+0x9d2/0xcc0 [ath9k]
[   30.866833]  [<ffffffffc09e6b36>] ? ath9k_tasklet+0x1b6/0x230 [ath9k]
[   30.866843]  [<ffffffff8107f720>] ? tasklet_action+0xf0/0x100
[   30.866854]  [<ffffffff815c9278>] ? __do_softirq+0xf8/0x28e
[   30.866862]  [<ffffffff8107fe4b>] ? irq_exit+0x9b/0xa0
[   30.866871]  [<ffffffff815c8fcf>] ? do_IRQ+0x4f/0xd0
[   30.866879]  [<ffffffff815c7102>] ? common_interrupt+0x82/0x82
[   30.866883]  <EOI>  [<ffffffff8148f7e5>] ? cpuidle_enter_state+0x115/0x2c0
[   30.866900]  [<ffffffff8148f7d5>] ? cpuidle_enter_state+0x105/0x2c0
[   30.866913]  [<ffffffff810bb0a0>] ? cpu_startup_entry+0x290/0x330
[   30.866923]  [<ffffffff8104e32a>] ? start_secondary+0x15a/0x190
[   30.866945] ---[ end trace b687f8c512391ae5 ]---
[   45.549423] wlp2s0: disconnect from AP dc:eb:94:4e:d5:52 for new auth to 00:17:0f:21:25:fd
[   45.555735] wlp2s0: authenticate with 00:17:0f:21:25:fd
[   45.566134] wlp2s0: send auth to 00:17:0f:21:25:fd (try 1/3)
[   45.568649] wlp2s0: authenticated
[   45.572159] wlp2s0: associate with 00:17:0f:21:25:fd (try 1/3)
[   45.574874] wlp2s0: RX AssocResp from 00:17:0f:21:25:fd (capab=0x111 status=0 aid=5)
[   45.574999] wlp2s0: associated
[   45.579700] ath: EEPROM regdomain: 0x817c
[   45.579706] ath: EEPROM indicates we should expect a country code
[   45.579709] ath: doing EEPROM country->regdmn map search
[   45.579712] ath: country maps to regdmn code: 0x37
[   45.579715] ath: Country alpha2 being used: IT
[   45.579717] ath: Regpair used: 0x37
[   45.579720] ath: regdomain 0x817c dynamically updated by country IE
[   45.629995] wlp2s0: Limiting TX power to 17 dBm as advertised by 00:17:0f:21:25:fd
[   67.233425] wlp2s0: disconnect from AP 00:17:0f:21:25:fd for new auth to dc:eb:94:4e:d5:5d
[   67.237827] wlp2s0: authenticate with dc:eb:94:4e:d5:5d
[   67.248126] wlp2s0: send auth to dc:eb:94:4e:d5:5d (try 1/3)
[   67.249315] wlp2s0: authenticated
[   67.253345] wlp2s0: associate with dc:eb:94:4e:d5:5d (try 1/3)
[   67.256339] wlp2s0: RX AssocResp from dc:eb:94:4e:d5:5d (capab=0x111 status=0 aid=10)
[   67.259877] wlp2s0: associated
[   67.281860] ath: EEPROM regdomain: 0x817c
[   67.281862] ath: EEPROM indicates we should expect a country code
[   67.281863] ath: doing EEPROM country->regdmn map search
[   67.281864] ath: country maps to regdmn code: 0x37
[   67.281865] ath: Country alpha2 being used: IT
[   67.281866] ath: Regpair used: 0x37
[   67.281867] ath: regdomain 0x817c dynamically updated by country IE
[   67.361863] wlp2s0: Limiting TX power to 18 dBm as advertised by dc:eb:94:4e:d5:5d
[   71.632556] systemd[1]: apt-daily.timer: Adding 10h 1min 856.211ms random time.
[   72.031801] systemd[1]: apt-daily.timer: Adding 11h 15min 23.646476s random time.
[   72.254573] systemd[1]: apt-daily.timer: Adding 7h 30min 21.895810s random time.