[    0.000000] Linux version 4.9.0-3-686-pae (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u5 (2017-09-19)
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000df9cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000df9d000-0x000000000dffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: WinNET G170/G170, BIOS 4.6-1689-g0d3b11898b 10/05/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0xdf9d max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FF0000000 write-back
[    0.000000]   1 base 00E000000 mask FFE000000 uncachable
[    0.000000]   2 base 0F8000000 mask FFC000000 write-combining
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] initial memory mapped: [mem 0x00000000-0x0bdfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] BRK [0x0b995000, 0x0b995fff] PGTABLE
[    0.000000] BRK [0x0b996000, 0x0b997fff] PGTABLE
[    0.000000] BRK [0x0b998000, 0x0b998fff] PGTABLE
[    0.000000] BRK [0x0b999000, 0x0b999fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x0c729000-0x0d899fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F7110 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x000000000DFB00E0 000044 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x000000000DFB09B0 0000F4 (v04 CORE   COREBOOT 00000000 CORE 0000002A)
[    0.000000] ACPI: DSDT 0x000000000DFB0280 000724 (v02 COREv4 COREBOOT 20170227 INTL 20161222)
[    0.000000] ACPI: FACS 0x000000000DFB0240 000040
[    0.000000] ACPI: FACS 0x000000000DFB0240 000040
[    0.000000] ACPI: SSDT 0x000000000DFB0AB0 000068 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: TCPA 0x000000000DFB0B20 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x000000000DFB0B60 000054 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 223MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 0df9d000
[    0.000000]   low ram: 0 - 0df9d000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000df9cfff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000000df9cfff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000000df9cfff]
[    0.000000] On node 0 totalpages: 57147
[    0.000000] free_area_init_node: node 0, pgdat cb7e4940, node_mem_map cdda5024
[    0.000000]   DMA zone: 36 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 468 pages used for memmap
[    0.000000]   Normal zone: 53149 pages, LIFO batch:15
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option.
[    0.000000] Using ACPI for processor (LAPIC) configuration information
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x0e000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] percpu: Embedded 20 pages/cpu @cdd8e000 s50700 r0 d31220 u81920
[    0.000000] pcpu-alloc: s50700 r0 d31220 u81920 alloc=20*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 56643
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-3-686-pae root=/dev/mapper/mettigel--vg-root ro console=ttyS0,115200 noapic
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 198516K/228588K available (5819K kernel code, 646K rwdata, 1716K rodata, 752K init, 456K bss, 30072K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
                   pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
                   vmalloc : 0xce79d000 - 0xff9fe000   ( 786 MB)
                   lowmem  : 0xc0000000 - 0xcdf9d000   ( 223 MB)
                     .init : 0xcb801000 - 0xcb8bd000   ( 752 kB)
                     .data : 0xcb5af032 - 0xcb7ff9c0   (2370 kB)
                     .text : 0xcb000000 - 0xcb5af032   (5820 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[    0.000000] NR_IRQS:2304 nr_irqs:32 16
[    0.000000] CPU 0 irqstacks, hard=cc02e000 soft=cc030000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 399.027 MHz processor
[    0.000105] Calibrating delay loop (skipped), value calculated using timer frequency.. 798.05 BogoMIPS (lpj=1596108)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20160831
[    0.005445] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.008000] ACPI: setting ELCR to 0200 (from 0c21)
[    0.008328] Security Framework initialized
[    0.012025] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.016072] AppArmor: AppArmor disabled by boot time parameter
[    0.020185] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.024024] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.034252] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.036047] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.122966] Freeing SMP alternatives memory: 24K (cb8bd000 - cb8c3000)
[    0.137961] ftrace: allocating 24027 entries in 47 pages
[    0.204960] smpboot: Max logical packages: 1
[    0.208075] Enabling APIC mode:  Flat.  Using 0 I/O APICs
[    0.220014] smpboot: CPU0: Centaur VIA Eden Processor  400MHz (family: 0x6, model: 0xd, stepping: 0x0)
[    0.228026] Performance Events: no PMU driver, software events only.
[    0.241207] NMI watchdog: disabled (cpu0): hardware events not enabled
[    0.244019] NMI watchdog: Shutting down hard lockup detector on all cpus
[    0.248149] x86: Booted up 1 node, 1 CPUs
[    0.252024] smpboot: Total of 1 processors activated (798.05 BogoMIPS)
[    0.260181] devtmpfs: initialized
[    0.266826] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.268060] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.272396] pinctrl core: initialized pinctrl subsystem
[    0.277537] NET: Registered protocol family 16
[    0.285239] cpuidle: using governor ladder
[    0.288023] cpuidle: using governor menu
[    0.292329] ACPI FADT declares the system doesn't support MSI, so disable it
[    0.296017] ACPI: bus type PCI registered
[    0.300026] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.304612] PCI: Using configuration type 1 for base access
[    0.321654] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.326339] ACPI: Added _OSI(Module Device)
[    0.328054] ACPI: Added _OSI(Processor Device)
[    0.332017] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.336016] ACPI: Added _OSI(Processor Aggregator Device)
[    0.344405] ACPI: Interpreter enabled
[    0.348131] ACPI: (supports S0 S5)
[    0.351553] ACPI: Using PIC for interrupt routing
[    0.352672] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.365697] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.368066] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments]
[    0.372055] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.376040] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.381342] PCI host bridge to bus 0000:00
[    0.384043] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.388025] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.392026] pci_bus 0000:00: root bus resource [mem 0x10000000-0xfebfffff window]
[    0.396028] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.400084] pci 0000:00:00.0: [1106:0314] type 00 class 0x060000
[    0.400139] pci 0000:00:00.0: reg 0x10: [mem 0xf8000000-0xf9ffffff pref]
[    0.400843] pci 0000:00:00.1: [1106:1314] type 00 class 0x060000
[    0.401449] pci 0000:00:00.2: [1106:2314] type 00 class 0x060000
[    0.402045] pci 0000:00:00.3: [1106:3208] type 00 class 0x060000
[    0.402757] pci 0000:00:00.4: [1106:4314] type 00 class 0x060000
[    0.404285] pci 0000:00:00.7: [1106:7314] type 00 class 0x060000
[    0.404885] pci 0000:00:01.0: [1106:b198] type 01 class 0x060400
[    0.405048] pci 0000:00:01.0: supports D1
[    0.405586] pci 0000:00:0f.0: [1106:3149] type 00 class 0x01018f
[    0.405641] pci 0000:00:0f.0: reg 0x10: [io  0x1ca0-0x1ca7]
[    0.405678] pci 0000:00:0f.0: reg 0x14: [io  0x1cb0-0x1cb3]
[    0.405717] pci 0000:00:0f.0: reg 0x18: [io  0x1ca8-0x1caf]
[    0.405753] pci 0000:00:0f.0: reg 0x1c: [io  0x1cb4-0x1cb7]
[    0.405790] pci 0000:00:0f.0: reg 0x20: [io  0x1c80-0x1c8f]
[    0.405827] pci 0000:00:0f.0: reg 0x24: [io  0x1000-0x10ff]
[    0.406413] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a
[    0.406539] pci 0000:00:0f.1: reg 0x20: [io  0x1c90-0x1c9f]
[    0.406601] pci 0000:00:0f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.408029] pci 0000:00:0f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.412023] pci 0000:00:0f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.416024] pci 0000:00:0f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.420626] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
[    0.420757] pci 0000:00:10.0: reg 0x20: [io  0x1c00-0x1c1f]
[    0.420890] pci 0000:00:10.0: supports D1 D2
[    0.420906] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.421506] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
[    0.421637] pci 0000:00:10.1: reg 0x20: [io  0x1c20-0x1c3f]
[    0.421773] pci 0000:00:10.1: supports D1 D2
[    0.421789] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.424488] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
[    0.424618] pci 0000:00:10.2: reg 0x20: [io  0x1c40-0x1c5f]
[    0.424750] pci 0000:00:10.2: supports D1 D2
[    0.424766] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.425353] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
[    0.425482] pci 0000:00:10.3: reg 0x20: [io  0x1c60-0x1c7f]
[    0.425619] pci 0000:00:10.3: supports D1 D2
[    0.425635] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.426236] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
[    0.426291] pci 0000:00:10.4: reg 0x10: [mem 0xfd010000-0xfd0100ff]
[    0.426500] pci 0000:00:10.4: supports D1 D2
[    0.426516] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.427115] pci 0000:00:10.5: [1106:d104] type 00 class 0x028000
[    0.427172] pci 0000:00:10.5: reg 0x10: [mem 0xfd011000-0xfd0110ff]
[    0.427377] pci 0000:00:10.5: supports D1 D2
[    0.427393] pci 0000:00:10.5: PME# supported from D0 D1 D2 D3hot
[    0.428028] pci 0000:00:11.0: [1106:3227] type 00 class 0x060100
[    0.428207] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.432669] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
[    0.432726] pci 0000:00:11.5: reg 0x10: [io  0x1400-0x14ff]
[    0.436061] pci 0000:00:11.5: supports D1 D2
[    0.436597] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
[    0.436654] pci 0000:00:12.0: reg 0x10: [io  0x1800-0x18ff]
[    0.436692] pci 0000:00:12.0: reg 0x14: [mem 0xfd012000-0xfd0120ff]
[    0.436884] pci 0000:00:12.0: supports D1 D2
[    0.436900] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.437859] pci 0000:01:00.0: [1106:3344] type 00 class 0x030000
[    0.437912] pci 0000:01:00.0: reg 0x10: [mem 0xf4000000-0xf7ffffff pref]
[    0.437947] pci 0000:01:00.0: reg 0x14: [mem 0xfb000000-0xfbffffff]
[    0.438046] pci 0000:01:00.0: reg 0x30: [mem 0xfd000000-0xfd00ffff pref]
[    0.438146] pci 0000:01:00.0: supports D1 D2
[    0.438660] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.440040] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.440063] pci 0000:00:01.0:   bridge window [mem 0xfb000000-0xfcffffff]
[    0.440086] pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf7ffffff pref]
[    0.440124] pci_bus 0000:00: on NUMA node 0
[    0.444520] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
[    0.450540] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12)
[    0.454514] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
[    0.461902] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.472237] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.476000] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.476019] vgaarb: loaded
[    0.480019] vgaarb: bridge control possible 0000:01:00.0
[    0.485063] PCI: Using ACPI for IRQ routing
[    0.488043] PCI: pci_cache_line_size set to 64 bytes
[    0.488300] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.488316] e820: reserve RAM buffer [mem 0x0df9d000-0x0fffffff]
[    0.494213] clocksource: Switched to clocksource refined-jiffies
[    0.594194] VFS: Disk quotas dquot_6.6.0
[    0.596203] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.601057] pnp: PnP ACPI init
[    0.605020] pnp: PnP ACPI: found 0 devices
[    0.608040] PnPBIOS: Disabled by ACPI PNP
[    0.671286] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.672122] clocksource: Switched to clocksource acpi_pm
[    0.677506] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfd000000-0xfd00ffff pref]: no compatible bridge window
[    0.687665] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc00ffff pref]
[    0.694941] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.699957] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.706110] pci 0000:00:01.0:   bridge window [mem 0xfb000000-0xfcffffff]
[    0.712942] pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf7ffffff pref]
[    0.720232] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.720251] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.720272] pci_bus 0000:00: resource 6 [mem 0x10000000-0xfebfffff window]
[    0.720293] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.720311] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
[    0.720330] pci_bus 0000:01: resource 2 [mem 0xf4000000-0xf7ffffff pref]
[    0.720782] NET: Registered protocol family 2
[    0.726958] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.734104] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[    0.740686] TCP: Hash tables configured (established 2048 bind 2048)
[    0.747290] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.753204] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.760165] NET: Registered protocol family 1
[    0.764790] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.774048] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[    0.779853] PCI: setting IRQ 11 as level-triggered
[    0.786950] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[    0.792750] PCI: setting IRQ 10 as level-triggered
[    0.792782] pci 0000:00:10.2: VIA VLink IRQ fixup, from 5 to 10
[    0.801581] pci 0000:00:10.3: VIA VLink IRQ fixup, from 5 to 10
[    0.811916] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    0.817732] pci 0000:00:10.4: VIA VLink IRQ fixup, from 10 to 11
[    0.825522] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.833922] PCI: CLS 64 bytes, default 64
[    0.834464] Unpacking initramfs...
[    5.654091] Freeing initrd memory: 17860K (cc729000 - cd89a000)
[    5.661198] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    5.672142] audit: initializing netlink subsys (disabled)
[    5.677826] audit: type=2000 audit(1507211726.675:1): initialized
[    5.687528] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[    5.694264] zbud: loaded
[    5.704776] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    5.712706] io scheduler noop registered
[    5.716739] io scheduler deadline registered
[    5.721238] io scheduler cfq registered (default)
[    5.727126] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    5.732917] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    5.739991] GHES: HEST is not enabled!
[    5.744035] isapnp: Scanning for PnP cards...
[    6.103583] isapnp: No Plug & Play device found
[    6.108856] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    6.136155] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    6.165091] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    6.175717] Linux agpgart interface v0.103
[    6.181211] agpgart: Detected VIA VT3314 chipset
[    6.191360] agpgart-via 0000:00:00.0: AGP aperture is 32M @ 0xf8000000
[    6.198989] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    6.206795] serio: i8042 KBD port at 0x60,0x64 irq 1
[    6.211862] serio: i8042 AUX port at 0x60,0x64 irq 12
[    6.218729] mousedev: PS/2 mouse device common for all mice
[    6.224951] rtc_cmos rtc_cmos: RTC can wake from S4
[    6.230779] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    6.237335] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram
[    6.244500] ledtrig-cpu: registered to indicate activity on CPUs
[    6.252597] NET: Registered protocol family 10
[    6.259658] mip6: Mobile IPv6
[    6.262926] NET: Registered protocol family 17
[    6.267435] mpls_gso: MPLS GSO support
[    6.271232] mce: Unable to init device /dev/mcelog (rc: -5)
[    6.277292] microcode: no support for this CPU vendor
[    6.282404] Using IPI No-Shortcut mode
[    6.287667] registered taskstats version 1
[    6.292214] zswap: loaded using pool lzo/zbud
[    6.297158] ima: No TPM chip found, activating TPM-bypass!
[    6.304528] rtc_cmos rtc_cmos: setting system clock to 2017-10-05 13:55:28 UTC (1507211728)
[    6.313335] PM: Hibernation image not present or could not be loaded.
[    6.318259] Freeing unused kernel memory: 752K (cb801000 - cb8bd000)
[    6.325670] Write protecting the kernel text: 5824k
[    6.331301] Write protecting the kernel read-only data: 1720k
[    6.337142] NX-protecting the kernel data: 4416k
[    6.344273] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    6.557625] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    6.577440] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    6.588623] random: udevadm: uninitialized urandom read (16 bytes read)
[    6.595812] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    6.605398] random: udevadm: uninitialized urandom read (16 bytes read)
[    6.629840] random: udevadm: uninitialized urandom read (16 bytes read)
[    6.637846] random: udevadm: uninitialized urandom read (16 bytes read)
[    6.648638] random: udevadm: uninitialized urandom read (16 bytes read)
[    6.656697] random: udevadm: uninitialized urandom read (16 bytes read)
[    6.664608] random: udevadm: uninitialized urandom read (16 bytes read)
[    6.688308] tsc: Refined TSC clocksource calibration: 398.999 MHz
[    6.694515] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x5c0579e1fc, max_idle_ns: 440795207643 ns
[    7.101350] SCSI subsystem initialized
[    7.153999] ACPI: bus type USB registered
[    7.187746] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[    7.196559] usbcore: registered new interface driver usbfs
[    7.236563] usbcore: registered new interface driver hub
[    7.256564] libata version 3.00 loaded.
[    7.272588] usbcore: registered new device driver usb
[    7.282172] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0x11800, 00:e0:c5:46:8a:3e, IRQ 11
[    7.291511] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link cde1
[    7.340409] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    7.378701] ehci-pci: EHCI PCI platform driver
[    7.389532] uhci_hcd: USB Universal Host Controller Interface driver
[    7.412638] alg: skcipher: Chunk test 1 failed on encryption at page 0 for ecb-aes-padlock
[    7.421057] 00000000: 71 73 f7 db 24 93 21 6d 61 1e bb 63 42 79 db 64
[    7.427545] 00000010: 6f 82 c0 ca a3 9b fa 0b d9 08 c7 4a 90 ae 8f 5f
[    7.432723] 00000020: 5e 06 f0 5f 31 51 18 37 45 d7 ca 3a fd 6c 3f e1
[    7.437913] 00000030: dd 8d 22 65 2b 00 50 ce ba 28 67 d7 ce 0e 0d ea
[    7.443094] 00000040: 78 69 7f ae 8f 8b 69 37 75 e0 dc 96 e0 b7 f4 09
[    7.448278] 00000050: cb 6d a2 fb da af 09 f8 81 82 27 fa 45 9c 29 a4
[    7.453459] 00000060: 22 8b 78 69 5b 46 f9 39 1b cc f9 1d 09 eb bc 5c
[    7.458644] 00000070: 41 72 51 97 1d 07 49 a0 1b 8e 65 4b b2 6a 12 03
[    7.463816] 00000080: 6a 60 95 ac bd ac 1a 64 de 5a a5 f0 83 2f cb ca
[    7.468984] 00000090: 22 74 a6 6c 9b 73 ce 3f e1 8b 22 17 59 0c 47 89
[    7.474148] 000000a0: 33 a1 d6 47 03 19 4f a8 67 69 f0 5b f0 20 ad 06
[    7.479312] 000000b0: 27 81 92 d8 c5 ba 98 12 be 24 b5 2f 75 02 c2 ad
[    7.484479] 000000c0: 12 2f 07 32 ee 39 af 64 05 8f b3 d4 eb 1b 46 6e
[    7.489668] 000000d0: d9 21 f9 c4 b7 c9 45 68 b4 a1 74 9f 82 47 eb cc
[    7.494836] 000000e0: bd 0a 14 95 0f 8b a8 2f 4b 1b a7 bf 82 a6 43 0c
[    7.500034] 000000f0: b9 39 4a a8 10 6f 50 7b 25 fb 26 81 e0 2f f0 96
[    7.505210] 00000100: 8d 8b ac 92 0f f6 ed 64 63 29 4c 8e 18 13 c5 bf
[    7.510383] 00000110: fc a0 d9 bf 7c 3a 0e 29 6f d1 6c 6f a5 da bf b1
[    7.515567] 00000120: 30 ea 44 2d c3 8f 16 e1 66 fa a3 21 3e fc 13 ca
[    7.520748] 00000130: f0 f6 f0 59 bd 8f 38 50 31 cb 69 3f 96 15 d6 f5
[    7.525932] 00000140: ae ff f6 aa 41 85 4c 10 58 e3 f9 44 e6 28 da 9a
[    7.531113] 00000150: dc 6a 80 34 73 97 1b c5 ca 26 16 77 0e 60 ab 89
[    7.536290] 00000160: 0f 04 27 bd ce 3e 71 b4 a0 d7 22 7e db eb 24 70
[    7.541471] 00000170: 42 71 51 78 70 b3 e0 3d 84 8e 8d 7b d0 6d ea 92
[    7.546643] 00000180: 11 08 42 4f e5 ad 26 92 d2 00 ae a8 e3 4b 37 47
[    7.551819] 00000190: 22 c1 95 c1 63 7f cb 03 f3 e3 d7 9d 60 c7 bc ea
[    7.556992] 000001a0: 35 a2 fd 45 52 39 13 6f c1 53 f3 53 df 33 84 d7
[    7.562176] 000001b0: d2 c8 37 b0 75 e3 41 46 b3 c7 83 2e 8a bb a4 e5
[    7.567349] 000001c0: 7f 3c fd 8b eb ea 63 bd b7 46 e7 bf 09 9c 0d 0f
[    7.572533] 000001d0: 33 84 aa 1c 8d 29 b4 ac 4f ad e6 89
[    7.580640] sata_via 0000:00:0f.0: version 2.6
[    7.582310] sata_via 0000:00:0f.0: VIA VLink IRQ fixup, from 0 to 10
[    7.608689] sata_via 0000:00:0f.0: routed to hard irq line 10
[    7.647315] scsi host0: sata_via
[    7.672315] scsi host1: sata_via
[    7.679448] ata1: SATA max UDMA/133 cmd 0x1ca0 ctl 0x1cb0 bmdma 0x1c80 irq 10
[    7.686803] ata2: SATA max UDMA/133 cmd 0x1ca8 ctl 0x1cb4 bmdma 0x1c88 irq 10
[    7.742436] pata_via 0000:00:0f.1: version 0.3.4
[    7.744647] pata_via 0000:00:0f.1: VIA VLink IRQ fixup, from 255 to 11
[    7.755875] clocksource: Switched to clocksource tsc
[    7.775578] ehci-pci 0000:00:10.4: EHCI Host Controller
[    7.796512] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 1
[    7.824642] ehci-pci 0000:00:10.4: irq 11, io mem 0xfd010000
[    7.860302] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    7.880407] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    7.887327] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.894605] usb usb1: Product: EHCI Host Controller
[    7.899523] usb usb1: Manufacturer: Linux 4.9.0-3-686-pae ehci_hcd
[    7.905738] usb usb1: SerialNumber: 0000:00:10.4
[    7.910530] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    8.014003] hub 1-0:1.0: USB hub found
[    8.032345] hub 1-0:1.0: 8 ports detected
[    8.058113] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    8.079446] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    8.104381] uhci_hcd 0000:00:10.0: detected 2 ports
[    8.126194] uhci_hcd 0000:00:10.0: irq 11, io base 0x00001c00
[    8.136280] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    8.170157] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    8.177138] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.184453] usb usb2: Product: UHCI Host Controller
[    8.189380] usb usb2: Manufacturer: Linux 4.9.0-3-686-pae uhci_hcd
[    8.195619] usb usb2: SerialNumber: 0000:00:10.0
[    8.259472] padlock_aes: Using VIA PadLock ACE for AES algorithm.
[    8.273001] hub 2-0:1.0: USB hub found
[    8.277050] hub 2-0:1.0: 2 ports detected
[    8.303660] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    8.314426] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    8.322131] uhci_hcd 0000:00:10.1: detected 2 ports
[    8.327739] uhci_hcd 0000:00:10.1: irq 11, io base 0x00001c20
[    8.334097] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    8.340960] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.348227] usb usb3: Product: UHCI Host Controller
[    8.353183] usb usb3: Manufacturer: Linux 4.9.0-3-686-pae uhci_hcd
[    8.359405] usb usb3: SerialNumber: 0000:00:10.1
[    8.369451] hub 3-0:1.0: USB hub found
[    8.373485] hub 3-0:1.0: 2 ports detected
[    8.380847] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    8.386215] usb 1-2: new high-speed USB device number 2 using ehci-pci
[    8.392869] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    8.400856] uhci_hcd 0000:00:10.2: detected 2 ports
[    8.405931] uhci_hcd 0000:00:10.2: irq 10, io base 0x00001c40
[    8.412460] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    8.419360] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.426730] usb usb4: Product: UHCI Host Controller
[    8.431673] usb usb4: Manufacturer: Linux 4.9.0-3-686-pae uhci_hcd
[    8.437936] usb usb4: SerialNumber: 0000:00:10.2
[    8.447771] hub 4-0:1.0: USB hub found
[    8.451853] hub 4-0:1.0: 2 ports detected
[    8.459113] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    8.465113] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    8.472660] uhci_hcd 0000:00:10.3: detected 2 ports
[    8.477681] uhci_hcd 0000:00:10.3: irq 10, io base 0x00001c60
[    8.484403] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    8.491297] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.498603] usb usb5: Product: UHCI Host Controller
[    8.503552] usb usb5: Manufacturer: Linux 4.9.0-3-686-pae uhci_hcd
[    8.509846] usb usb5: SerialNumber: 0000:00:10.3
[    8.519820] hub 5-0:1.0: USB hub found
[    8.523907] hub 5-0:1.0: 2 ports detected
[    8.562654] usb 1-2: New USB device found, idVendor=174c, idProduct=5136
[    8.569639] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    8.576899] usb 1-2: Product: AS2105
[    8.580605] usb 1-2: Manufacturer: ASMedia
[    8.584762] usb 1-2: SerialNumber: 00000000000000000000
[    8.736934] usb-storage 1-2:1.0: USB Mass Storage device detected
[    8.756962] scsi host2: usb-storage 1-2:1.0
[    8.769975] usbcore: registered new interface driver usb-storage
[    8.799399] usbcore: registered new interface driver uas
[    9.798391] scsi 2:0:0:0: Direct-Access     ASMT     2105             0    PQ: 0 ANSI: 6
[    9.841532] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    9.865821] sd 2:0:0:0: [sda] Write Protect is off
[    9.870881] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00
[    9.876550] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   10.194282]  sda: sda1 sda2 < sda5 >
[   10.218357] sd 2:0:0:0: [sda] Attached SCSI disk
[   10.321431] random: fast init done
[   10.790353] device-mapper: uevent: version 1.0.3
[   10.799799] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[   12.415930] PM: Starting manual resume from disk
[   12.421134] PM: Hibernation image partition 254:1 present
[   12.421142] PM: Looking for hibernation image.
[   12.422335] PM: Image not found (code -22)
[   12.422349] PM: Hibernation image not present or could not be loaded.
[   13.159248] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[   14.326311] random: crng init done
[   15.075188] ip_tables: (C) 2000-2006 Netfilter Core Team
[   15.225923] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[   15.245805] systemd[1]: Detected architecture x86.
[   15.311932] systemd[1]: Set hostname to <mettigel>.
[   17.911698] systemd[1]: Listening on Journal Socket (/dev/log).
[   17.932967] systemd[1]: Listening on fsck to fsckd communication Socket.
[   17.958210] systemd[1]: Created slice User and Session Slice.
[   17.981077] systemd[1]: Listening on LVM2 metadata daemon socket.
[   18.004941] systemd[1]: Listening on Syslog Socket.
[   18.024974] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   18.050170] systemd[1]: Created slice System Slice.
[   18.645757] RPC: Registered named UNIX socket transport module.
[   18.651987] RPC: Registered udp transport module.
[   18.656779] RPC: Registered tcp transport module.
[   18.661596] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   19.062160] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[   20.243865] systemd[1]: Started Load/Save Random Seed.
[   20.435547] systemd[1]: Started Create Static Device Nodes in /dev.
[   20.563470] systemd[1]: Starting udev Kernel Device Manager...
[   20.755705] systemd[1]: Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[   21.467149] systemd[1]: Started udev Kernel Device Manager.
[   22.568432] systemd[1]: Started Journal Service.
[   22.927958] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[   23.040310] ACPI: Power Button [PWRF]
[   23.220147] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   23.635544] systemd-journald[216]: Received request to flush runtime journal from PID 1
[   23.824008] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   23.984608] sd 2:0:0:0: Attached scsi generic sg0 type 0
[   24.090000] VIA RNG detected
[   24.309703] hwmon_vid: Using 6-bit VID table for VIA Eden CPU
[   24.474546] longhaul: Option "enable" not set - Aborting
[   24.627986] padlock_sha: Using VIA PadLock ACE for SHA1/SHA256 algorithms.
[   24.647499] snd_via82xx 0000:00:11.5: VIA VLink IRQ fixup, from 10 to 11
[   27.317327] Adding 258044k swap on /dev/mapper/mettigel--vg-swap_1.  Priority:-1 extents:1 across:258044k FS
[   28.440552] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[   28.546798] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[   29.083469] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[   32.602866] tun: Universal TUN/TAP device driver, 1.6
[   32.608384] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   36.684296] longhaul: Option "enable" not set - Aborting