[    0.000000] microcode: microcode updated early to revision 0x1c, date = 2015-02-26
[    0.000000] Linux version 4.12.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.4.0 20170805 (Debian 6.4.0-3) ) #1 SMP Debian 4.12.6-1 (2017-08-12)
[    0.000000] Command line: BOOT_IMAGE=/@/boot/vmlinuz-4.12.0-1-amd64 root=UUID=a1e06779-c49b-474f-8741-2985199b7d90 ro rootflags=subvol=@ intel_iommu=on rootflags=subvol=@
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff01fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ff02000-0x00000000829fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047c5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Sapphire Pure Platinum H61/Pure Platinum H61, BIOS 4.6-1237-g3f3025d7f1 08/26/2017
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x47c600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 080000000 mask FC0000000 uncachable
[    0.000000]   1 base 0C0000000 mask FF0000000 write-combining
[    0.000000]   2 base 0D0000000 mask FFE000000 write-combining
[    0.000000]   3 base 0D2000000 mask FFE000000 uncachable
[    0.000000]   4 base 0D4000000 mask FFC000000 uncachable
[    0.000000]   5 base 0D8000000 mask FF8000000 uncachable
[    0.000000]   6 base 0E0000000 mask FF0000000 write-combining
[    0.000000]   7 base 0F0000000 mask FF0000000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x7ff02 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff99f540099000] 99000 size 24576
[    0.000000] BRK [0x1ef554000, 0x1ef554fff] PGTABLE
[    0.000000] BRK [0x1ef555000, 0x1ef555fff] PGTABLE
[    0.000000] BRK [0x1ef556000, 0x1ef556fff] PGTABLE
[    0.000000] BRK [0x1ef557000, 0x1ef557fff] PGTABLE
[    0.000000] BRK [0x1ef558000, 0x1ef558fff] PGTABLE
[    0.000000] BRK [0x1ef559000, 0x1ef559fff] PGTABLE
[    0.000000] BRK [0x1ef55a000, 0x1ef55afff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35b2d000-0x36d8dfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F08B0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x000000007FF180E0 000054 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x000000007FF1AA80 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x000000007FF18280 0027F7 (v03 COREv4 COREBOOT 20141018 INTL 20161222)
[    0.000000] ACPI: FACS 0x000000007FF18240 000040
[    0.000000] ACPI: FACS 0x000000007FF18240 000040
[    0.000000] ACPI: SSDT 0x000000007FF1AB80 00279B (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: TCPA 0x000000007FF1D320 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x000000007FF1D360 00008C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DMAR 0x000000007FF1D3F0 0000A8 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x000000007FF1D4A0 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000047c5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x47c5ee000-0x47c5f2fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000047c5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007ff01fff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000047c5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000047c5fffff]
[    0.000000] On node 0 totalpages: 4179104
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8125 pages used for memmap
[    0.000000]   DMA32 zone: 519938 pages, LIFO batch:31
[    0.000000]   Normal zone: 57112 pages used for memmap
[    0.000000]   Normal zone: 3655168 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x0000000080a00000-0x00000000829fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ff02000-0x829fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x82a00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[    0.000000] e820: [mem 0x82a00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 38 pages/cpu @ffff99f9bc200000 s114776 r8192 d32680 u262144
[    0.000000] pcpu-alloc: s114776 r8192 d32680 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 4113782
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-4.12.0-1-amd64 root=UUID=a1e06779-c49b-474f-8741-2985199b7d90 ro rootflags=subvol=@ intel_iommu=on rootflags=subvol=@
[    0.000000] DMAR: IOMMU enabled
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16352324K/16716416K available (6481K kernel code, 1145K rwdata, 2908K rodata, 1468K init, 704K bss, 364092K reserved, 0K cma-reserved)
[    0.000000] ftrace: allocating 28155 entries in 110 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:488 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 3392.038 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.07 BogoMIPS (lpj=13568152)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170303
[    0.008667] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.008759] Security Framework initialized
[    0.008813] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.008875] AppArmor: AppArmor disabled by boot time parameter
[    0.009448] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.012369] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.013738] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.013804] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.014075] CPU: Physical Processor ID: 0
[    0.014129] CPU: Processor Core ID: 0
[    0.014187] mce: CPU supports 9 MCE banks
[    0.014252] CPU0: Thermal monitoring enabled (TM1)
[    0.014315] process: using mwait in idle threads
[    0.014371] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.014427] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.014571] Freeing SMP alternatives memory: 24K
[    0.015299] smpboot: Max logical packages: 2
[    0.015358] DMAR: Host address width 36
[    0.015413] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.015476] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.015543] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.015602] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.015671] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.015729] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.015784] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.016095] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.016151] x2apic enabled
[    0.016207] Switched APIC routing to cluster x2apic.
[    0.016699] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.056450] TSC deadline timer enabled
[    0.056452] smpboot: CPU0: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.056558] mce: [Hardware Error]: Machine check events logged
[    0.056616] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 7: ee2000000003110a
[    0.056685] mce: [Hardware Error]: TSC 0 ADDR feffff40 MISC 1040000086 
[    0.056746] mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1503827169 SOCKET 0 APIC 0 microcode 1c
[    0.056815] mce: [Hardware Error]: Machine check events logged
[    0.056873] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 8: ee2000000003110a
[    0.056941] mce: [Hardware Error]: TSC 0 ADDR feffff00 MISC 1040000086 
[    0.056999] mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1503827169 SOCKET 0 APIC 0 microcode 1c
[    0.057092] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.057178] ... version:                3
[    0.057233] ... bit width:              48
[    0.057287] ... generic registers:      4
[    0.057340] ... value mask:             0000ffffffffffff
[    0.057395] ... max period:             00007fffffffffff
[    0.057451] ... fixed-purpose events:   3
[    0.057505] ... event mask:             000000070000000f
[    0.057952] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.058034] smp: Bringing up secondary CPUs ...
[    0.058153] x86: Booting SMP configuration:
[    0.058207] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.618017] smp: Brought up 1 node, 8 CPUs
[    0.618017] smpboot: Total of 8 processors activated (54280.79 BogoMIPS)
[    0.620124] sched_clock: Marking stable (620000000, 0)->(617716075, 2283925)
[    0.620523] devtmpfs: initialized
[    0.620617] x86/mm: Memory block size: 128MB
[    0.622905] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.622986] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.623090] pinctrl core: initialized pinctrl subsystem
[    0.623224] NET: Registered protocol family 16
[    0.623400] cpuidle: using governor ladder
[    0.623456] cpuidle: using governor menu
[    0.623512] PCCT header not found.
[    0.623589] ACPI: bus type PCI registered
[    0.623644] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.623739] PCI: Using configuration type 1 for base access
[    0.623838] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.624620] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.624843] ACPI: Added _OSI(Module Device)
[    0.624895] ACPI: Added _OSI(Processor Device)
[    0.624951] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.625007] ACPI: Added _OSI(Processor Aggregator Device)
[    0.625161] ACPI: Executed 1 blocks of module-level executable AML code
[    0.627482] ACPI: Interpreter enabled
[    0.627548] ACPI: (supports S0 S3 S4 S5)
[    0.627603] ACPI: Using IOAPIC for interrupt routing
[    0.627674] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.629755] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.629815] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.629887] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.629964] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.630071] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c67ff])
[    0.630253] PCI host bridge to bus 0000:00
[    0.630308] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.630366] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.630425] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.630493] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.630561] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.630629] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.630697] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.630764] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.630832] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.630900] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.630968] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.631036] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.631105] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.631174] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.631241] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.631309] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xf7ffffff window]
[    0.631377] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.631443] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.631504] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[    0.631565] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.631587] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.631630] pci 0000:00:02.0: [8086:0162] type 00 class 0x030000
[    0.631637] pci 0000:00:02.0: reg 0x10: [mem 0xf1400000-0xf17fffff 64bit]
[    0.631642] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.631645] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.631744] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.631818] pci 0000:00:16.0: reg 0x10: [mem 0xf1a08000-0xf1a0800f 64bit]
[    0.632139] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.632218] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.632234] pci 0000:00:1a.0: reg 0x10: [mem 0xf1a05000-0xf1a053ff]
[    0.632312] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.632340] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.632424] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.632437] pci 0000:00:1b.0: reg 0x10: [mem 0xf1a00000-0xf1a03fff 64bit]
[    0.632499] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.632526] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.632612] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.632716] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.632739] pci 0000:00:1c.0: Enabling MPC IRBNCE
[    0.632795] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[    0.632895] pci 0000:00:1c.1: [8086:1c18] type 01 class 0x060400
[    0.632961] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.632975] pci 0000:00:1c.1: Enabling MPC IRBNCE
[    0.633031] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled
[    0.633133] pci 0000:00:1c.4: [8086:1c1a] type 01 class 0x060400
[    0.633197] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.633212] pci 0000:00:1c.4: Enabling MPC IRBNCE
[    0.633268] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled
[    0.633371] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.633387] pci 0000:00:1d.0: reg 0x10: [mem 0xf1a06000-0xf1a063ff]
[    0.633465] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.633493] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.633575] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[    0.633715] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[    0.633730] pci 0000:00:1f.2: reg 0x10: [io  0x3060-0x3067]
[    0.633737] pci 0000:00:1f.2: reg 0x14: [io  0x3070-0x3073]
[    0.633744] pci 0000:00:1f.2: reg 0x18: [io  0x3068-0x306f]
[    0.633752] pci 0000:00:1f.2: reg 0x1c: [io  0x3074-0x3077]
[    0.633759] pci 0000:00:1f.2: reg 0x20: [io  0x3040-0x305f]
[    0.633767] pci 0000:00:1f.2: reg 0x24: [mem 0xf1a04000-0xf1a047ff]
[    0.633808] pci 0000:00:1f.2: PME# supported from D3hot
[    0.633854] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.633868] pci 0000:00:1f.3: reg 0x10: [mem 0xf1a07000-0xf1a070ff 64bit]
[    0.633886] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.633964] pci 0000:01:00.0: [10de:1401] type 00 class 0x030000
[    0.633969] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf0ffffff]
[    0.633975] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.633980] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.633984] pci 0000:01:00.0: reg 0x24: [io  0x1000-0x107f]
[    0.633988] pci 0000:01:00.0: reg 0x30: [mem 0xf1000000-0xf107ffff pref]
[    0.634027] pci 0000:01:00.1: [10de:0fba] type 00 class 0x040300
[    0.634032] pci 0000:01:00.1: reg 0x10: [mem 0xf1080000-0xf1083fff]
[    0.634090] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.634146] pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
[    0.634147] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf10fffff]
[    0.634149] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.634203] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.634335] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.634368] pci 0000:03:00.0: reg 0x10: [mem 0xf1800000-0xf1807fff 64bit]
[    0.634552] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.644045] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.644121] pci 0000:00:1c.1:   bridge window [mem 0xf1800000-0xf18fffff]
[    0.644316] pci 0000:04:00.0: [11ab:4380] type 00 class 0x020000
[    0.644496] pci 0000:04:00.0: reg 0x10: [mem 0xf1920000-0xf1923fff 64bit]
[    0.644599] pci 0000:04:00.0: reg 0x18: [io  0x2000-0x20ff]
[    0.644958] pci 0000:04:00.0: reg 0x30: [mem 0xf1900000-0xf191ffff pref]
[    0.645397] pci 0000:04:00.0: supports D1 D2
[    0.645397] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.656154] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.656213] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
[    0.656216] pci 0000:00:1c.4:   bridge window [mem 0xf1900000-0xf19fffff]
[    0.656309] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.656403] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.656494] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.656584] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.656673] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.656764] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.656854] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.656945] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.657179] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.657237] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.657309] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.657380] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.657435] pci 0000:00:02.0: vgaarb: no bridge control possible
[    0.657492] vgaarb: loaded
[    0.657572] EDAC MC: Ver: 3.0.0
[    0.657738] PCI: Using ACPI for IRQ routing
[    0.657794] PCI: pci_cache_line_size set to 64 bytes
[    0.657885] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.657886] e820: reserve RAM buffer [mem 0x7ff02000-0x7fffffff]
[    0.657886] e820: reserve RAM buffer [mem 0x47c600000-0x47fffffff]
[    0.657999] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.658059] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.660134] clocksource: Switched to clocksource hpet
[    0.666372] VFS: Disk quotas dquot_6.6.0
[    0.666441] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.666546] pnp: PnP ACPI init
[    0.666653] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.666712] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.666770] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.666827] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.666885] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.666942] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.667000] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.667058] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.667118] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[    0.667177] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[    0.667237] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.667385] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.667444] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.667471] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.667527] system 00:02: [io  0x0480-0x04bf] has been reserved
[    0.667585] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.667599] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.667612] pnp: PnP ACPI: found 4 devices
[    0.673548] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.673651] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.673709] pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
[    0.673767] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf10fffff]
[    0.673826] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.673894] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.673965] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.674023] pci 0000:00:1c.1:   bridge window [mem 0xf1800000-0xf18fffff]
[    0.674088] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.674144] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
[    0.674204] pci 0000:00:1c.4:   bridge window [mem 0xf1900000-0xf19fffff]
[    0.674269] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.674270] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.674271] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.674272] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.674272] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[    0.674273] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[    0.674274] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.674275] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.674275] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.674276] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.674277] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.674278] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.674278] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.674279] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[    0.674280] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.674281] pci_bus 0000:00: resource 19 [mem 0x82a00000-0xf7ffffff window]
[    0.674281] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[    0.674282] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.674283] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff]
[    0.674284] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.674285] pci_bus 0000:03: resource 1 [mem 0xf1800000-0xf18fffff]
[    0.674285] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    0.674286] pci_bus 0000:04: resource 1 [mem 0xf1900000-0xf19fffff]
[    0.674332] NET: Registered protocol family 2
[    0.674511] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.674724] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.674885] TCP: Hash tables configured (established 131072 bind 65536)
[    0.674969] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.675057] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.675171] NET: Registered protocol family 1
[    0.675235] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.676207] PCI: CLS 64 bytes, default 64
[    0.676232] Unpacking initramfs...
[    0.907229] Freeing initrd memory: 18820K
[    0.907316] DMAR: No RMRR found
[    0.907372] DMAR: No ATSR found
[    0.907849] DMAR: dmar0: Using Queued invalidation
[    0.907911] DMAR: dmar1: Using Queued invalidation
[    0.907976] DMAR: Setting RMRR:
[    0.908032] DMAR: Prepare 0-16MiB unity mapping for LPC
[    0.908131] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
[    0.908290] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    0.908397] iommu: Adding device 0000:00:00.0 to group 0
[    0.908464] iommu: Adding device 0000:00:01.0 to group 1
[    0.908526] iommu: Adding device 0000:00:02.0 to group 2
[    0.908590] iommu: Adding device 0000:00:16.0 to group 3
[    0.908651] iommu: Adding device 0000:00:1a.0 to group 4
[    0.908714] iommu: Adding device 0000:00:1b.0 to group 5
[    0.908777] iommu: Adding device 0000:00:1c.0 to group 6
[    0.908839] iommu: Adding device 0000:00:1c.1 to group 7
[    0.908902] iommu: Adding device 0000:00:1c.4 to group 8
[    0.908964] iommu: Adding device 0000:00:1d.0 to group 9
[    0.909033] iommu: Adding device 0000:00:1f.0 to group 10
[    0.909095] iommu: Adding device 0000:00:1f.2 to group 10
[    0.909157] iommu: Adding device 0000:00:1f.3 to group 10
[    0.909217] iommu: Adding device 0000:01:00.0 to group 1
[    0.909277] iommu: Adding device 0000:01:00.1 to group 1
[    0.909338] iommu: Adding device 0000:03:00.0 to group 11
[    0.909401] iommu: Adding device 0000:04:00.0 to group 12
[    0.910884] audit: initializing netlink subsys (disabled)
[    0.910982] audit: type=2000 audit(1503827169.910:1): state=initialized audit_enabled=0 res=1
[    0.911205] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    0.911335] zbud: loaded
[    1.156305] Key type asymmetric registered
[    1.156364] Asymmetric key parser 'x509' registered
[    1.156432] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.156531] io scheduler noop registered
[    1.156587] io scheduler deadline registered
[    1.156650] io scheduler cfq registered (default)
[    1.156707] io scheduler mq-deadline registered
[    1.157165] intel_idle: MWAIT substates: 0x1120
[    1.157166] intel_idle: v0.4.1 model 0x3A
[    1.157351] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.157788] GHES: HEST is not enabled!
[    1.157884] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.158209] Linux agpgart interface v0.103
[    1.158306] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.158364] AMD IOMMUv2 functionality not available on this system
[    1.158804] i8042: PNP: No PS/2 controller found.
[    1.158860] i8042: Probing ports directly.
[    1.916236] tsc: Refined TSC clocksource calibration: 3392.295 MHz
[    1.916303] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e5dfea93c, max_idle_ns: 440795225583 ns
[    2.195469] i8042: No controller found
[    2.195640] mousedev: PS/2 mouse device common for all mice
[    2.195722] rtc_cmos 00:03: RTC can wake from S4
[    2.195909] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    2.195996] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    2.196072] intel_pstate: Intel P-state driver initializing
[    2.196500] ledtrig-cpu: registered to indicate activity on CPUs
[    2.197589] NET: Registered protocol family 10
[    2.197930] Segment Routing with IPv6
[    2.198010] mip6: Mobile IPv6
[    2.198072] NET: Registered protocol family 17
[    2.198137] mpls_gso: MPLS GSO support
[    2.198833] microcode: sig=0x306a9, pf=0x2, revision=0x1c
[    2.199079] microcode: Microcode Update Driver: v2.2.
[    2.199359] registered taskstats version 1
[    2.199509] zswap: loaded using pool lzo/zbud
[    2.199779] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    2.200316] rtc_cmos 00:03: setting system clock to 2017-08-27 09:46:11 UTC (1503827171)
[    2.200425] PM: Hibernation image not present or could not be loaded.
[    2.202460] Freeing unused kernel memory: 1468K
[    2.202525] Write protecting the kernel read-only data: 12288k
[    2.203225] Freeing unused kernel memory: 1696K
[    2.207109] Freeing unused kernel memory: 1188K
[    2.208799] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.288178] sky2: driver version 1.30
[    2.288750] sky2 0000:04:00.0: Yukon-2 UL 2 chip revision 0
[    2.289087] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    2.289593] ACPI: bus type USB registered
[    2.290081] SCSI subsystem initialized
[    2.290186] sky2 0000:04:00.0 eth0: addr dc:9c:52:07:d2:6b
[    2.290363] usbcore: registered new interface driver usbfs
[    2.290441] usbcore: registered new interface driver hub
[    2.290528] usbcore: registered new device driver usb
[    2.291020] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.291404] libata version 3.00 loaded.
[    2.291591] ehci-pci: EHCI PCI platform driver
[    2.291789] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    2.291857] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.291944] ehci-pci 0000:00:1a.0: debug port 2
[    2.292786] AVX version of gcm_enc/dec engaged.
[    2.292873] AES CTR mode by8 optimization enabled
[    2.295970] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    2.295988] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf1a05000
[    2.308273] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.308431] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.308491] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.308560] usb usb1: Product: EHCI Host Controller
[    2.308617] usb usb1: Manufacturer: Linux 4.12.0-1-amd64 ehci_hcd
[    2.308690] usb usb1: SerialNumber: 0000:00:1a.0
[    2.308916] hub 1-0:1.0: USB hub found
[    2.309000] hub 1-0:1.0: 3 ports detected
[    2.309315] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    2.309393] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[    2.313998] xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[    2.314322] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.314385] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.314457] usb usb2: Product: xHCI Host Controller
[    2.314518] usb usb2: Manufacturer: Linux 4.12.0-1-amd64 xhci-hcd
[    2.314579] usb usb2: SerialNumber: 0000:03:00.0
[    2.314816] hub 2-0:1.0: USB hub found
[    2.314896] hub 2-0:1.0: 2 ports detected
[    2.315047] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    2.315077] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    2.315083] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    2.315097] ehci-pci 0000:00:1d.0: debug port 2
[    2.315394] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[    2.315534] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.315673] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    2.315769] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.315888] usb usb4: Product: xHCI Host Controller
[    2.315979] usb usb4: Manufacturer: Linux 4.12.0-1-amd64 xhci-hcd
[    2.316073] usb usb4: SerialNumber: 0000:03:00.0
[    2.316314] hub 4-0:1.0: USB hub found
[    2.316417] hub 4-0:1.0: 2 ports detected
[    2.319070] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    2.319083] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf1a06000
[    2.332320] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.332429] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.332495] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.332571] usb usb3: Product: EHCI Host Controller
[    2.332632] usb usb3: Manufacturer: Linux 4.12.0-1-amd64 ehci_hcd
[    2.332697] usb usb3: SerialNumber: 0000:00:1d.0
[    2.332974] hub 3-0:1.0: USB hub found
[    2.333043] hub 3-0:1.0: 3 ports detected
[    2.333280] ahci 0000:00:1f.2: version 3.0
[    2.333468] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    2.343647] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    2.343732] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    2.344679] scsi host0: ahci
[    2.345006] scsi host1: ahci
[    2.345295] scsi host2: ahci
[    2.345572] scsi host3: ahci
[    2.345856] scsi host4: ahci
[    2.346174] scsi host5: ahci
[    2.346327] ata1: SATA max UDMA/133 abar m2048@0xf1a04000 port 0xf1a04100 irq 35
[    2.346430] ata2: SATA max UDMA/133 abar m2048@0xf1a04000 port 0xf1a04180 irq 35
[    2.346510] ata3: DUMMY
[    2.346570] ata4: DUMMY
[    2.346631] ata5: SATA max UDMA/133 abar m2048@0xf1a04000 port 0xf1a04300 irq 35
[    2.346712] ata6: SATA max UDMA/133 abar m2048@0xf1a04000 port 0xf1a04380 irq 35
[    2.636320] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.659041] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.660320] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    2.673930] ata1.00: ATA-8: KINGSTON SH103S3120G, 526ABBF0, max UDMA/133
[    2.674002] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.685658] ata1.00: configured for UDMA/133
[    2.686139] scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SH103S3 BBF0 PQ: 0 ANSI: 5
[    2.784722] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.784791] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.785258] hub 1-1:1.0: USB hub found
[    2.785415] hub 1-1:1.0: 4 ports detected
[    2.808715] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[    2.808786] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.809140] hub 3-1:1.0: USB hub found
[    2.809334] hub 3-1:1.0: 6 ports detected
[    2.940506] clocksource: Switched to clocksource tsc
[    3.038749] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.053312] ata2.00: ATA-8: KINGSTON SH103S3120G, 526ABBF0, max UDMA/133
[    3.053383] ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    3.063211] ata2.00: configured for UDMA/133
[    3.063563] scsi 1:0:0:0: Direct-Access     ATA      KINGSTON SH103S3 BBF0 PQ: 0 ANSI: 5
[    3.096342] usb 3-1.1: new high-speed USB device number 3 using ehci-pci
[    3.277878] usb 3-1.1: New USB device found, idVendor=046d, idProduct=082b
[    3.277947] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.278026] usb 3-1.1: Product: Webcam C170
[    3.278088] usb 3-1.1: Manufacturer:  
[    3.360364] usb 3-1.3: new high-speed USB device number 4 using ehci-pci
[    3.406808] ata5: SATA link down (SStatus 0 SControl 300)
[    3.469016] usb 3-1.3: New USB device found, idVendor=1a40, idProduct=0101
[    3.469085] usb 3-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.469164] usb 3-1.3: Product: USB 2.0 Hub
[    3.469504] hub 3-1.3:1.0: USB hub found
[    3.469706] hub 3-1.3:1.0: 4 ports detected
[    3.548379] usb 3-1.5: new full-speed USB device number 5 using ehci-pci
[    3.657155] usb 3-1.5: New USB device found, idVendor=0cf3, idProduct=3000
[    3.657226] usb 3-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.718802] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.725362] ata6.00: ATA-7: SAMSUNG HD502HI, 1AG01118, max UDMA7
[    3.725430] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    3.732034] ata6.00: configured for UDMA/133
[    3.732342] scsi 5:0:0:0: Direct-Access     ATA      SAMSUNG HD502HI  1118 PQ: 0 ANSI: 5
[    3.767557] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    3.767601] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    3.767622] sd 1:0:0:0: [sdb] Write Protect is off
[    3.767625] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.767652] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.767753] sd 5:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    3.767780] sd 5:0:0:0: [sdc] Write Protect is off
[    3.767784] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    3.767831] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.768124] sd 0:0:0:0: [sda] Write Protect is off
[    3.768189] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.768207] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.771105]  sdb: sdb1 sdb2 sdb3 sdb4
[    3.771288]  sda: sda1 sda2 sda3 sda4
[    3.771409] sd 1:0:0:0: [sdb] Attached SCSI disk
[    3.771559] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.776385] usb 3-1.3.1: new low-speed USB device number 6 using ehci-pci
[    3.797094]  sdc: sdc1 sdc2
[    3.798061] sd 5:0:0:0: [sdc] Attached SCSI disk
[    3.820473] random: fast init done
[    3.916953] usb 3-1.3.1: New USB device found, idVendor=0518, idProduct=0001
[    3.917011] usb 3-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.917669] usb 3-1.3.1: Product: USB-compliant keyboard
[    3.917724] usb 3-1.3.1: Manufacturer: Plus More Enterprise LTD.
[    3.919932] hidraw: raw HID events driver (C) Jiri Kosina
[    3.925944] usbcore: registered new interface driver usbhid
[    3.926000] usbhid: USB HID core driver
[    3.926687] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.0/0003:0518:0001.0001/input/input0
[    3.984595] hid-generic 0003:0518:0001.0001: input,hidraw0: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.0-1.3.1/input0
[    3.984777] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.1/0003:0518:0001.0002/input/input1
[    4.000412] usb 3-1.3.3: new full-speed USB device number 7 using ehci-pci
[    4.044677] hid-generic 0003:0518:0001.0002: input,hidraw1: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.0-1.3.1/input1
[    4.135163] usb 3-1.3.3: New USB device found, idVendor=258a, idProduct=1007
[    4.135242] usb 3-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.135322] usb 3-1.3.3: Product: Game Mouse
[    4.135383] usb 3-1.3.3: Manufacturer: SINOWEALTH
[    4.136064] VFIO - User Level meta-driver version: 0.3
[    4.137124] input: SINOWEALTH Game Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3.3/3-1.3.3:1.0/0003:258A:1007.0003/input/input2
[    4.137330] hid-generic 0003:258A:1007.0003: input,hidraw2: USB HID v1.11 Mouse [SINOWEALTH Game Mouse] on usb-0000:00:1d.0-1.3.3/input0
[    4.137938] vfio-pci 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=none
[    4.140669] input: SINOWEALTH Game Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3.3/3-1.3.3:1.1/0003:258A:1007.0004/input/input3
[    4.156437] vfio_pci: add [10de:1401[ffff:ffff]] class 0x000000/00000000
[    4.176442] vfio_pci: add [10de:0fba[ffff:ffff]] class 0x000000/00000000
[    4.200508] hid-generic 0003:258A:1007.0004: input,hiddev0,hidraw3: USB HID v1.11 Keyboard [SINOWEALTH Game Mouse] on usb-0000:00:1d.0-1.3.3/input1
[    4.260416] raid6: sse2x1   gen()  9907 MB/s
[    4.328418] raid6: sse2x1   xor()  8227 MB/s
[    4.396422] raid6: sse2x2   gen() 13120 MB/s
[    4.464427] raid6: sse2x2   xor()  9420 MB/s
[    4.532434] raid6: sse2x4   gen() 15430 MB/s
[    4.600438] raid6: sse2x4   xor() 11479 MB/s
[    4.600518] raid6: using algorithm sse2x4 gen() 15430 MB/s
[    4.600574] raid6: .... xor() 11479 MB/s, rmw enabled
[    4.600629] raid6: using ssse3x2 recovery algorithm
[    4.600952] xor: automatically using best checksumming function   avx       
[    4.604523] Btrfs loaded, crc32c=crc32c-intel
[    4.657568] BTRFS: device fsid a1e06779-c49b-474f-8741-2985199b7d90 devid 1 transid 139286 /dev/sda4
[    4.657753] BTRFS: device label data devid 1 transid 26504 /dev/sdc1
[    4.664988] PM: Starting manual resume from disk
[    4.665051] PM: Hibernation image partition 8:34 present
[    4.665052] PM: Looking for hibernation image.
[    4.665240] PM: Image not found (code -22)
[    4.665241] PM: Hibernation image not present or could not be loaded.
[    4.673161] BTRFS info (device sda4): disk space caching is enabled
[    4.673235] BTRFS info (device sda4): has skinny extents
[    4.712615] BTRFS info (device sda4): detected SSD devices, enabling SSD mode
[    4.869458] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.874286] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    4.874655] systemd[1]: Detected architecture x86-64.
[    4.876834] systemd[1]: Set hostname to <debianDesktop>.
[    4.968329] systemd[1]: Listening on udev Kernel Socket.
[    4.968769] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.969139] systemd[1]: Listening on RPCbind Server Activation Socket.
[    4.969501] systemd[1]: Listening on fsck to fsckd communication Socket.
[    4.969850] systemd[1]: Reached target User and Group Name Lookups.
[    4.970221] systemd[1]: Listening on Journal Socket.
[    4.970640] systemd[1]: Listening on Journal Audit Socket.
[    4.987056] BTRFS info (device sda4): use lzo compression
[    4.987057] BTRFS info (device sda4): disk space caching is enabled
[    4.988569] lp: driver loaded but no devices found
[    4.989939] ppdev: user-space parallel port driver
[    4.993637] f71882fg: Found f71808a chip at 0x290, revision 33
[    4.993782] f71882fg f71882fg.656: Fan: 1 is in duty-cycle mode
[    4.993850] f71882fg f71882fg.656: Auto pwm controlled by raw digital data, disabling pwm auto_point sysfs attributes for fan 1
[    4.993935] f71882fg f71882fg.656: Fan: 2 is in duty-cycle mode
[    4.993952] f71882fg f71882fg.656: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    5.036316] systemd-journald[344]: Received request to flush runtime journal from PID 1
[    5.092919] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    5.092992] ACPI: Power Button [PWRF]
[    5.094441] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    5.094863] acpi device:03: registered as cooling_device8
[    5.094968] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    5.136914] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.136938] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    5.136938] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    5.136939] RAPL PMU: hw unit of domain package 2^-16 Joules
[    5.136939] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    5.137310] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    5.137312] EDAC ie31200: No ECC support
[    5.137672] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.137768] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    5.137866] sd 5:0:0:0: Attached scsi generic sg2 type 0
[    5.156733] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20170303/utaddress-247)
[    5.156828] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.156904] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170303/utaddress-247)
[    5.156993] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.157067] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170303/utaddress-247)
[    5.157157] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.157844] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170303/utaddress-247)
[    5.157937] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.158010] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    5.158884] media: Linux media interface: v0.10
[    5.163546] Linux video capture interface: v2.00
[    5.173811] wmi: Mapper loaded
[    5.179099] [drm] Memory usable by graphics device = 2048M
[    5.179151] [drm] VT-d active for gfx access
[    5.179443] [drm] Replacing VGA console driver
[    5.180094] Console: switching to colour dummy device 80x25
[    5.180142] [drm] DMAR active, disabling use of stolen memory
[    5.180189] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.180194] [drm] Driver supports precise vblank timestamp query.
[    5.180201] i915 0000:00:02.0: Invalid PCI ROM data signature: expecting 0x52494350, got 0xe934aa55
[    5.180207] [drm] Failed to find VBIOS tables (VBT)
[    5.180436] vfio-pci 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=none
[    5.180446] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    5.189447] Bluetooth: Core ver 2.22
[    5.189465] NET: Registered protocol family 31
[    5.189469] Bluetooth: HCI device and connection manager initialized
[    5.189476] Bluetooth: HCI socket layer initialized
[    5.189481] Bluetooth: L2CAP socket layer initialized
[    5.189489] Bluetooth: SCO socket layer initialized
[    5.190300] [drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on minor 0
[    5.191505] usbcore: registered new interface driver snd-usb-audio
[    5.191508] uvcvideo: Found UVC 1.00 device Webcam C170 (046d:082b)
[    5.193269] usb 3-1.5: firmware: direct-loading firmware ath3k-1.fw
[    5.193549] intel_rapl: Found RAPL domain package
[    5.193553] intel_rapl: Found RAPL domain core
[    5.193555] intel_rapl: Found RAPL domain uncore
[    5.197766] uvcvideo 3-1.1:1.0: Entity type for entity Processing 2 was not initialized!
[    5.197774] uvcvideo 3-1.1:1.0: Entity type for entity Extension 6 was not initialized!
[    5.197780] uvcvideo 3-1.1:1.0: Entity type for entity Camera 1 was not initialized!
[    5.197866] input: Webcam C170 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input7
[    5.197928] usbcore: registered new interface driver uvcvideo
[    5.197932] USB Video Class driver (1.1.1)
[    5.203518] iTCO_vendor_support: vendor-support=0
[    5.204125] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    5.204159] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[    5.205400] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    5.205409] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.205417] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    5.205423] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
[    5.205427] snd_hda_codec_realtek hdaudioC0D2:    dig-out=0x1e/0x0
[    5.205432] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[    5.205436] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
[    5.205441] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
[    5.205445] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
[    5.237870] Adding 16778236k swap on /dev/sdc2.  Priority:-1 extents:1 across:16778236k FS
[    5.240873] BTRFS info (device sdc1): use lzo compression
[    5.240878] BTRFS info (device sdc1): disk space caching is enabled
[    5.240882] BTRFS info (device sdc1): has skinny extents
[    5.281579] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.281604] fbcon: inteldrmfb (fb0) is primary device
[    5.283894] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    5.283933] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    5.283961] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    5.283989] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    5.284019] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    5.284048] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    5.284075] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    5.284108] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    5.284146] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    5.284193] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    5.344001] Console: switching to colour frame buffer device 240x67
[    5.367628] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    5.438964] usbcore: registered new interface driver ath3k
[    5.649649] usb 3-1.5: USB disconnect, device number 5
[    6.775140] random: crng init done
[    6.813001] DMAR: DRHD: handling fault status reg 2
[    6.813059] DMAR: [DMA Write] Request device [00:02.0] fault addr 7330000000 [fault reason 05] PTE Write access is not set
[    6.896634] usb 3-1.5: new full-speed USB device number 8 using ehci-pci
[    7.005617] usb 3-1.5: New USB device found, idVendor=0cf3, idProduct=3005
[    7.005666] usb 3-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    7.028333] usbcore: registered new interface driver btusb
[   11.079985] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   11.081120] Bluetooth: BNEP filters: protocol multicast
[   11.082241] Bluetooth: BNEP socket layer initialized
[   11.286749] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.291078] sky2 0000:04:00.0 eth0: enabling interface
[   11.292424] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.370573] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   12.383985] Ebtables v2.0 registered
[   13.756372] sky2 0000:04:00.0 eth0: Link is up at 1000 Mbps, full duplex, flow control both
[   13.757995] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   15.165569] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   15.166107] Bridge firewalling registered
[   15.169211] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[   15.201749] Initializing XFRM netlink socket
[   15.206251] Netfilter messages via NETLINK v0.30.
[   15.207062] ctnetlink v0.93: registering with nfnetlink.
[   15.237962] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[   15.973332] usb 3-1.1: reset high-speed USB device number 3 using ehci-pci
[   16.214091] Bluetooth: RFCOMM TTY layer initialized
[   16.214100] Bluetooth: RFCOMM socket layer initialized
[   16.214108] Bluetooth: RFCOMM ver 1.11
[   21.125200] fuse init (API version 7.26)