[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.88-1
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=952fb4da-576e-46f7-8173-64f8266e5027 ro console=ttyS0,115200 console=tty0
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003ff9f000 (usable)
[    0.000000]  BIOS-e820: 000000003ff9f000 - 0000000040000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: MSI MS-7135/MS-7135, BIOS jakllsch 05/10/2017
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x3ff9f max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 base 00F0000000 mask FFF8000000 write-combining
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [ffff8800000f6f20] f6f20
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-000000003ff9f000
[    0.000000]  0000000000 - 003fe00000 page 2M
[    0.000000]  003fe00000 - 003ff9f000 page 4k
[    0.000000] kernel direct mapping tables up to 3ff9f000 @ 1fffd000-20000000
[    0.000000] RAMDISK: 368e8000 - 3746c000
[    0.000000] ACPI: RSDP 0x00000000000F7110 00024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x000000003FFB00E0 0005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x000000003FFB1A60 00074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x000000003FFB0280 017DD (v01 CORE   CB-DSDT  00000001 INTL 20161222)
[    0.000000] ACPI: FACS 0x000000003FFB0240 00040
[    0.000000] ACPI: SSDT 0x000000003FFB1B60 0027F (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: TCPA 0x000000003FFB1DE0 00032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x000000003FFB1E20 00050 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x000000003FFB1E70 00090 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x000000003FFB1F00 0002D (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x000000003FFB1F30 00038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: Node 0 PXM 0 0-a0000
[    0.000000] SRAT: Node 0 PXM 0 100000-40000000
[    0.000000] NUMA: Initialized distance table, cnt=1
[    0.000000] NUMA: Node 0 [0,a0000) + [100000,3ff9f000) -> [0,3ff9f000)
[    0.000000] Initmem setup node 0 0000000000000000-000000003ff9f000
[    0.000000]   NODE_DATA [000000003ff99000 - 000000003ff9dfff]
[    0.000000]  [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003e600000-ffff88003f3fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003ff9f
[    0.000000] On node 0 totalpages: 261934
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3922 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 3527 pages used for memmap
[    0.000000]   DMA32 zone: 254424 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:c0000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88003fc00000 s78912 r8192 d23488 u2097152
[    0.000000] pcpu-alloc: s78912 r8192 d23488 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 258346
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=952fb4da-576e-46f7-8173-64f8266e5027 ro console=ttyS0,115200 console=tty0
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ f8000000 size 64 MB
[    0.000000] Memory: 1012976k/1048188k available (3447k kernel code, 452k absent, 34760k reserved, 3292k data, 584k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:256 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2010.000 MHz processor.
[    0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.00 BogoMIPS (lpj=8040000)
[    0.016004] pid_max: default: 32768 minimum: 301
[    0.020060] Security Framework initialized
[    0.024010] AppArmor: AppArmor disabled by boot time parameter
[    0.028103] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.032962] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.036497] Mount-cache hash table entries: 256
[    0.040198] Initializing cgroup subsys cpuacct
[    0.044009] Initializing cgroup subsys memory
[    0.048022] Initializing cgroup subsys devices
[    0.052006] Initializing cgroup subsys freezer
[    0.056006] Initializing cgroup subsys net_cls
[    0.060006] Initializing cgroup subsys blkio
[    0.064016] Initializing cgroup subsys perf_event
[    0.068041] tseg: 0000000000
[    0.068069] mce: CPU supports 5 MCE banks
[    0.072037] SMP alternatives: switching to UP code
[    0.078619] Freeing SMP alternatives: 8k freed
[    0.080016] ACPI: Core revision 20110623
[    0.088919] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.134500] CPU0: AMD Sempron(tm) Processor 3400+ stepping 02
[    0.144008] Performance Events: AMD PMU driver.
[    0.144011] ... version:                0
[    0.148010] ... bit width:              48
[    0.152010] ... generic registers:      4
[    0.156010] ... value mask:             0000ffffffffffff
[    0.160010] ... max period:             00007fffffffffff
[    0.164010] ... fixed-purpose events:   0
[    0.168011] ... event mask:             000000000000000f
[    0.172238] NMI watchdog enabled, takes one hw-pmu counter.
[    0.176041] Brought up 1 CPUs
[    0.180014] Total of 1 processors activated (4020.00 BogoMIPS).
[    0.184507] devtmpfs: initialized
[    0.191892] print_constraints: dummy: 
[    0.192089] NET: Registered protocol family 16
[    0.196159] node 0 link 0: io port [1000, 5fff]
[    0.196163] TOM: 0000000040000000 aka 1024M
[    0.200016] node 0 link 0: mmio [a0000, bffff]
[    0.200020] node 0 link 0: mmio [fc000000, fd3fffff]
[    0.200023] node 0 link 0: mmio [f0000000, f7ffffff]
[    0.200027] bus: [00, 03] on node 0 link 0
[    0.200030] bus: 00 index 0 [io  0x0000-0xffff]
[    0.200033] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[    0.200036] bus: 00 index 2 [mem 0xf8000000-0xfcffffffff]
[    0.200038] bus: 00 index 3 [mem 0x40000000-0xf7ffffff]
[    0.200051] ACPI: bus type pci registered
[    0.204099] PCI: Using configuration type 1 for base access
[    0.208986] bio: create slab <bio-0> at 0
[    0.212127] ACPI: Added _OSI(Module Device)
[    0.216019] ACPI: Added _OSI(Processor Device)
[    0.220015] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.224016] ACPI: Added _OSI(Processor Aggregator Device)
[    0.228303] ACPI: EC: Look up EC in DSDT
[    0.228644] ACPI: Executed 1 blocks of module-level executable AML code
[    0.237104] ACPI: Interpreter enabled
[    0.240020] ACPI: (supports S0 S5)
[    0.244666] ACPI: Using IOAPIC for interrupt routing
[    0.253462] ACPI: No dock devices found.
[    0.256023] HEST: Table not found.
[    0.260021] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.268063] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-03])
[    0.278140] pci_root PNP0A03:00: host bridge window [io  0x03b0-0x03df]
[    0.280020] pci_root PNP0A03:00: host bridge window [io  0x0d00-0x5fff]
[    0.284020] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xf7ffffff]
[    0.288020] pci_root PNP0A03:00: host bridge window [mem 0xfc000000-0xfd3fffff]
[    0.292020] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.296020] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.300022] pci_root PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x0000-0x0cf7] ignored
[    0.304039] pci 0000:00:00.0: [10de:005e] type 0 class 0x000580
[    0.304114] pci 0000:00:01.0: [10de:0050] type 0 class 0x000601
[    0.304122] pci 0000:00:01.0: reg 10: [io  0x5400-0x547f]
[    0.304153] pci 0000:00:01.1: [10de:0052] type 0 class 0x000c05
[    0.304161] pci 0000:00:01.1: reg 10: [io  0x5800-0x581f]
[    0.304174] pci 0000:00:01.1: reg 20: [io  0x5480-0x54bf]
[    0.304179] pci 0000:00:01.1: reg 24: [io  0x54c0-0x54ff]
[    0.304195] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.304214] pci 0000:00:02.0: [10de:005a] type 0 class 0x000c03
[    0.304222] pci 0000:00:02.0: reg 10: [mem 0xfd300000-0xfd300fff]
[    0.304249] pci 0000:00:02.0: supports D1 D2
[    0.304251] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.304267] pci 0000:00:02.1: [10de:005b] type 0 class 0x000c03
[    0.304276] pci 0000:00:02.1: reg 10: [mem 0xfd305000-0xfd3050ff]
[    0.304308] pci 0000:00:02.1: supports D1 D2
[    0.304311] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.304332] pci 0000:00:04.0: [10de:0059] type 0 class 0x000401
[    0.304339] pci 0000:00:04.0: reg 10: [io  0x4c00-0x4cff]
[    0.304345] pci 0000:00:04.0: reg 14: [io  0x5000-0x50ff]
[    0.304350] pci 0000:00:04.0: reg 18: [mem 0xfd301000-0xfd301fff]
[    0.304372] pci 0000:00:04.0: supports D1 D2
[    0.304386] pci 0000:00:06.0: [10de:0053] type 0 class 0x000101
[    0.304403] pci 0000:00:06.0: reg 20: [io  0x5820-0x582f]
[    0.304431] pci 0000:00:07.0: [10de:0054] type 0 class 0x000101
[    0.304439] pci 0000:00:07.0: reg 10: [io  0x5850-0x5857]
[    0.304444] pci 0000:00:07.0: reg 14: [io  0x5878-0x587b]
[    0.304449] pci 0000:00:07.0: reg 18: [io  0x5858-0x585f]
[    0.304454] pci 0000:00:07.0: reg 1c: [io  0x587c-0x587f]
[    0.304459] pci 0000:00:07.0: reg 20: [io  0x5830-0x583f]
[    0.304464] pci 0000:00:07.0: reg 24: [mem 0xfd302000-0xfd302fff]
[    0.304489] pci 0000:00:08.0: [10de:0055] type 0 class 0x000101
[    0.304497] pci 0000:00:08.0: reg 10: [io  0x5860-0x5867]
[    0.304502] pci 0000:00:08.0: reg 14: [io  0x5880-0x5883]
[    0.304507] pci 0000:00:08.0: reg 18: [io  0x5868-0x586f]
[    0.304512] pci 0000:00:08.0: reg 1c: [io  0x5884-0x5887]
[    0.304517] pci 0000:00:08.0: reg 20: [io  0x5840-0x584f]
[    0.304523] pci 0000:00:08.0: reg 24: [mem 0xfd303000-0xfd303fff]
[    0.304547] pci 0000:00:09.0: [10de:005c] type 1 class 0x000604
[    0.304577] pci 0000:00:0a.0: [10de:0057] type 0 class 0x000680
[    0.304587] pci 0000:00:0a.0: reg 10: [mem 0xfd304000-0xfd304fff]
[    0.304592] pci 0000:00:0a.0: reg 14: [io  0x5870-0x5877]
[    0.304622] pci 0000:00:0a.0: supports D1 D2
[    0.304625] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.304644] pci 0000:00:0d.0: [10de:005d] type 1 class 0x000604
[    0.304672] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.304690] pci 0000:00:0e.0: [10de:005d] type 1 class 0x000604
[    0.304716] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.304738] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[    0.304761] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[    0.304780] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[    0.304798] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[    0.304839] pci 0000:01:00.0: [10de:0181] type 0 class 0x000300
[    0.304851] pci 0000:01:00.0: reg 10: [mem 0xfc000000-0xfcffffff]
[    0.304858] pci 0000:01:00.0: reg 14: [mem 0xf0000000-0xf7ffffff pref]
[    0.304882] pci 0000:01:00.0: reg 30: [mem 0xfd080000-0xfd09ffff pref]
[    0.304929] pci 0000:01:09.0: [1095:3124] type 0 class 0x000106
[    0.304946] pci 0000:01:09.0: reg 10: [mem 0xfd0a8000-0xfd0a807f 64bit]
[    0.304957] pci 0000:01:09.0: reg 18: [mem 0xfd0a0000-0xfd0a7fff 64bit]
[    0.304965] pci 0000:01:09.0: reg 20: [io  0x1000-0x100f]
[    0.304978] pci 0000:01:09.0: reg 30: [mem 0xfd000000-0xfd07ffff pref]
[    0.305009] pci 0000:01:09.0: supports D1 D2
[    0.305034] pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode)
[    0.308022] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    0.308026] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfd0fffff]
[    0.308029] pci 0000:00:09.0:   bridge window [mem 0xf0000000-0xf7ffffff pref]
[    0.308033] pci 0000:00:09.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.308036] pci 0000:00:09.0:   bridge window [io  0x0d00-0x5fff] (subtractive decode)
[    0.308040] pci 0000:00:09.0:   bridge window [mem 0xf0000000-0xf7ffffff] (subtractive decode)
[    0.308043] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfd3fffff] (subtractive decode)
[    0.308047] pci 0000:00:09.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.308097] pci 0000:02:00.0: [1095:3531] type 0 class 0x000180
[    0.308128] pci 0000:02:00.0: reg 10: [mem 0xfd102000-0xfd10207f 64bit]
[    0.308154] pci 0000:02:00.0: reg 18: [mem 0xfd100000-0xfd101fff 64bit]
[    0.308171] pci 0000:02:00.0: reg 20: [io  0x2000-0x207f]
[    0.308283] pci 0000:02:00.0: supports D1 D2
[    0.316037] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[    0.320023] pci 0000:00:0d.0:   bridge window [io  0x2000-0x2fff]
[    0.320027] pci 0000:00:0d.0:   bridge window [mem 0xfd100000-0xfd1fffff]
[    0.320065] pci 0000:03:00.0: [197b:2360] type 0 class 0x000106
[    0.320087] pci 0000:03:00.0: reg 10: [io  0x3010-0x3017]
[    0.320097] pci 0000:03:00.0: reg 14: [io  0x3020-0x3023]
[    0.320108] pci 0000:03:00.0: reg 18: [io  0x3018-0x301f]
[    0.320119] pci 0000:03:00.0: reg 1c: [io  0x3024-0x3027]
[    0.320130] pci 0000:03:00.0: reg 20: [io  0x3000-0x300f]
[    0.320141] pci 0000:03:00.0: reg 24: [mem 0xfd200000-0xfd201fff]
[    0.320187] pci 0000:03:00.0: PME# supported from D3hot
[    0.320200] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.324028] pci 0000:00:0e.0: PCI bridge to [bus 03-03]
[    0.328023] pci 0000:00:0e.0:   bridge window [io  0x3000-0x3fff]
[    0.328027] pci 0000:00:0e.0:   bridge window [mem 0xfd200000-0xfd2fffff]
[    0.328040] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.328173] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIC._PRT]
[    0.328261]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    0.340752] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    0.345776] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    0.353087] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 *18 19)
[    0.357784] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 *19)
[    0.361793] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    0.369658] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0
[    0.376108] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    0.381785] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 22 *23)
[    0.388878] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 *23)
[    0.393785] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    0.402705] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    0.410073] ACPI: PCI Interrupt Link [LSA0] (IRQs *20 21 22 23)
[    0.416478] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 *21 22 23)
[    0.421793] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 *22 23)
[    0.429288] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.432031] vgaarb: loaded
[    0.436028] vgaarb: bridge control possible 0000:01:00.0
[    0.440093] PCI: Using ACPI for IRQ routing
[    0.444031] PCI: pci_cache_line_size set to 64 bytes
[    0.444100] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.444104] reserve RAM buffer: 000000003ff9f000 - 000000003fffffff 
[    0.444269] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.448034] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    0.453189] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.460123] Switching to clocksource hpet
[    0.466406] pnp: PnP ACPI init
[    0.469585] ACPI: bus type pnp registered
[    0.475545] pnp 00:00: [bus 00-03]
[    0.475548] pnp 00:00: [io  0x03b0-0x03df window]
[    0.475552] pnp 00:00: [io  0x0d00-0x5fff window]
[    0.475555] pnp 00:00: [mem 0xf0000000-0xf7ffffff window]
[    0.475558] pnp 00:00: [mem 0xfc000000-0xfd3fffff window]
[    0.475561] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.475566] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.475569] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.475625] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.475848] pnp 00:01: [io  0x0060]
[    0.475851] pnp 00:01: [io  0x0064]
[    0.475865] pnp 00:01: [irq 1]
[    0.475902] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.475935] pnp 00:02: [irq 12]
[    0.475972] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.476011] pnp 00:03: [io  0x0378-0x0387]
[    0.476019] pnp 00:03: [irq 7]
[    0.476054] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.476085] pnp 00:04: [io  0x03f0-0x03f7]
[    0.476092] pnp 00:04: [irq 6]
[    0.476095] pnp 00:04: [dma 2]
[    0.476132] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.476146] pnp: PnP ACPI: found 5 devices
[    0.480310] ACPI: ACPI bus type pnp unregistered
[    0.492077] PCI: max bus depth: 1 pci_try_num: 2
[    0.492109] pci 0000:00:09.0: PCI bridge to [bus 01-01]
[    0.497410] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    0.503571] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfd0fffff]
[    0.510426] pci 0000:00:09.0:   bridge window [mem 0xf0000000-0xf7ffffff pref]
[    0.517743] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[    0.523035] pci 0000:00:0d.0:   bridge window [io  0x2000-0x2fff]
[    0.529198] pci 0000:00:0d.0:   bridge window [mem 0xfd100000-0xfd1fffff]
[    0.536056] pci 0000:00:0e.0: PCI bridge to [bus 03-03]
[    0.541349] pci 0000:00:0e.0:   bridge window [io  0x3000-0x3fff]
[    0.551767] pci 0000:00:0e.0:   bridge window [mem 0xfd200000-0xfd2fffff]
[    0.558632] pci 0000:00:09.0: setting latency timer to 64
[    0.558638] pci 0000:00:0d.0: setting latency timer to 64
[    0.558643] pci 0000:00:0e.0: setting latency timer to 64
[    0.558647] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.558650] pci_bus 0000:00: resource 5 [io  0x0d00-0x5fff]
[    0.558653] pci_bus 0000:00: resource 6 [mem 0xf0000000-0xf7ffffff]
[    0.558656] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfd3fffff]
[    0.558659] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[    0.558663] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.558666] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfd0fffff]
[    0.558669] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff pref]
[    0.558672] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
[    0.558675] pci_bus 0000:01: resource 5 [io  0x0d00-0x5fff]
[    0.558678] pci_bus 0000:01: resource 6 [mem 0xf0000000-0xf7ffffff]
[    0.558681] pci_bus 0000:01: resource 7 [mem 0xfc000000-0xfd3fffff]
[    0.558684] pci_bus 0000:01: resource 8 [mem 0x000a0000-0x000bffff]
[    0.558687] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.558690] pci_bus 0000:02: resource 1 [mem 0xfd100000-0xfd1fffff]
[    0.558693] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    0.558696] pci_bus 0000:03: resource 1 [mem 0xfd200000-0xfd2fffff]
[    0.558760] NET: Registered protocol family 2
[    0.565368] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.573254] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[    0.582655] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.590347] TCP: Hash tables configured (established 131072 bind 65536)
[    0.597051] TCP reno registered
[    0.600267] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.606271] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.612835] NET: Registered protocol family 1
[    0.617496] ACPI: PCI Interrupt Link [LUOH] enabled at IRQ 23
[    0.623467] ACPI: PCI Interrupt Link [LUEH] enabled at IRQ 22
[    0.629341] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.634928] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.640511] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.646071] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    0.651714] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.657304] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.662857] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    0.668503] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.674070] pci 0000:01:00.0: Boot video device
[    0.674082] PCI: CLS 64 bytes, default 64
[    0.674158] Unpacking initramfs...
[    1.028240] Freeing initrd memory: 11792k freed
[    1.043977] agpgart-amd64 0000:01:00.0: AGP bridge [10de/0181]
[    1.049901] agpgart-amd64 0000:01:00.0: aperture from AGP @ f0000008fc000000 size 0 MB
[    1.057923] pci 0000:00:18.3: no usable aperture found
[    1.063128] pci 0000:00:18.3: consider rebooting with iommu=memaper=2 to get a good aperture
[    1.071789] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.079929] audit: initializing netlink socket (disabled)
[    1.085417] type=2000 audit(1494446144.084:1): initialized
[    1.108438] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.115278] VFS: Disk quotas dquot_6.5.2
[    1.119311] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.125910] msgmni has been set to 2001
[    1.130007] alg: No test for stdrng (krng)
[    1.134215] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.141709] io scheduler noop registered
[    1.145704] io scheduler deadline registered
[    1.150058] io scheduler cfq registered (default)
[    1.155022] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.160696] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.167377] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    1.174134] ERST: Table is not found!
[    1.177867] GHES: HEST is not enabled!
[    1.181782] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.208403] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.234775] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.241214] Linux agpgart interface v0.103
[    1.245504] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    1.255964] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.261001] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.266260] mousedev: PS/2 mouse device common for all mice
[    1.272000] rtc_cmos rtc_cmos: RTC can wake from S4
[    1.277090] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    1.283547] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    1.290343] cpuidle: using governor ladder
[    1.294518] cpuidle: using governor menu
[    1.298773] TCP cubic registered
[    1.302107] NET: Registered protocol family 10
[    1.307215] Mobile IPv6
[    1.309736] NET: Registered protocol family 17
[    1.314366] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.323081] Registering the dns_resolver key type
[    1.328032] PM: Hibernation image not present or could not be loaded.
[    1.328050] registered taskstats version 1
[    1.332655] rtc_cmos rtc_cmos: setting system clock to 2017-05-10 19:55:45 UTC (1494446145)
[    1.341231] Initializing network drop monitor service
[    1.348030] Freeing unused kernel memory: 584k freed
[    1.353531] Write protecting the kernel read-only data: 6144k
[    1.362898] Freeing unused kernel memory: 632k freed
[    1.371963] Freeing unused kernel memory: 680k freed
[    1.400325] udevd[45]: starting version 175
[    1.463004] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.474118] usbcore: registered new interface driver usbfs
[    1.486647] SCSI subsystem initialized
[    1.540400] ACPI: PCI Interrupt Link [LEMA] enabled at IRQ 21
[    1.556884] libata version 3.00 loaded.
[    1.571155] usbcore: registered new interface driver hub
[    1.591450] forcedeth 0000:00:0a.0: setting latency timer to 64
[    1.591957] sata_sil24 0000:01:09.0: version 1.1
[    1.592174] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19
[    1.608413] usbcore: registered new device driver usb
[    1.613947] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.625050] scsi0 : sata_sil24
[    1.639059] ahci 0000:03:00.0: version 3.0
[    1.639230] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18
[    1.647921] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.656091] scsi1 : sata_sil24
[    1.664943] scsi2 : sata_sil24
[    1.670873] scsi3 : sata_sil24
[    1.677052] ata1: SATA max UDMA/100 host m128@0xfd0a8000 port 0xfd0a0000 irq 19
[    1.684495] ata2: SATA max UDMA/100 host m128@0xfd0a8000 port 0xfd0a2000 irq 19
[    1.691902] ata3: SATA max UDMA/100 host m128@0xfd0a8000 port 0xfd0a4000 irq 19
[    1.699301] ata4: SATA max UDMA/100 host m128@0xfd0a8000 port 0xfd0a6000 irq 19
[    1.706731] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[    1.714922] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    1.722137] ahci 0000:03:00.0: setting latency timer to 64
[    1.722938] sata_sil24 0000:02:00.0: setting latency timer to 64
[    1.723371] scsi4 : ahci
[    1.726816] scsi5 : sata_sil24
[    1.730101] ata6: SATA max UDMA/100 host m128@0xfd102000 port 0xfd100000 irq 19
[    1.737677] ata5: SATA max UDMA/133 abar m8192@0xfd200000 port 0xfd200100 irq 18
[    1.746287] FDC 0 is a post-1991 82077
[    2.064027] ata5: SATA link down (SStatus 0 SControl 300)
[    2.076012] Refined TSC clocksource calibration: 2010.302 MHz.
[    2.081920] Switching to clocksource tsc
[    2.112741] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d3:16:e4:55
[    2.121190] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[    2.127998] sata_nv 0000:00:07.0: version 3.5
[    2.128177] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[    2.134081] sata_nv 0000:00:07.0: setting latency timer to 64
[    2.134650] scsi6 : sata_nv
[    2.137686] scsi7 : sata_nv
[    2.140665] ata7: SATA max UDMA/133 cmd 0x5850 ctl 0x5878 bmdma 0x5830 irq 20
[    2.147872] ata8: SATA max UDMA/133 cmd 0x5858 ctl 0x587c bmdma 0x5838 irq 20
[    2.155294] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 21
[    2.161240] sata_nv 0000:00:08.0: setting latency timer to 64
[    2.161795] scsi8 : sata_nv
[    2.164820] scsi9 : sata_nv
[    2.167785] ata9: SATA max UDMA/133 cmd 0x5860 ctl 0x5880 bmdma 0x5840 irq 21
[    2.175001] ata10: SATA max UDMA/133 cmd 0x5868 ctl 0x5884 bmdma 0x5848 irq 21
[    2.182638] pata_amd 0000:00:06.0: version 0.4.1
[    2.182697] pata_amd 0000:00:06.0: setting latency timer to 64
[    2.183391] scsi10 : pata_amd
[    2.186644] scsi11 : pata_amd
[    2.189796] ata11: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5820 irq 14
[    2.196920] ata12: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x5828 irq 15
[    2.204552] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    2.204556] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    2.210081] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    2.217597] ehci_hcd 0000:00:02.1: debug port 1
[    2.222201] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[    2.222228] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfd305000
[    2.236009] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.241859] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.248714] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.256028] usb usb1: Product: EHCI Host Controller
[    2.260968] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    2.267044] usb usb1: SerialNumber: 0000:00:02.1
[    2.272045] hub 1-0:1.0: USB hub found
[    2.275856] hub 1-0:1.0: 10 ports detected
[    2.280442] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    2.280447] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    2.285773] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.293299] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfd300000
[    2.354014] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.360869] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.368185] usb usb2: Product: OHCI Host Controller
[    2.373124] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[    2.379199] usb usb2: SerialNumber: 0000:00:02.0
[    2.384288] hub 2-0:1.0: USB hub found
[    2.388116] hub 2-0:1.0: 10 ports detected
[    2.393777] ata11.00: ATA-5: WDC WD800BB-75CAA0, 16.06V16, max UDMA/100
[    2.400483] ata11.00: 156301488 sectors, multi 0: LBA 
[    2.405691] ata11: nv_mode_filter: 0x3f39f&0xfffff->0x3f39f, BIOS=0x0 (0x0) ACPI=0x0
[    2.421046] ata11.00: configured for UDMA/100
[    2.488015] ata7: SATA link down (SStatus 0 SControl 300)
[    2.493526] ata9: SATA link down (SStatus 0 SControl 300)
[    3.800015] ata1: SATA link down (SStatus 0 SControl 0)
[    3.840031] ata6: SATA link down (SStatus 0 SControl 0)
[    5.884018] ata2: SATA link down (SStatus 0 SControl 0)
[    7.968017] ata3: SATA link down (SStatus 0 SControl 0)
[   10.052016] ata4: SATA link down (SStatus 0 SControl 0)
[   10.368009] ata8: SATA link down (SStatus 0 SControl 300)
[   10.684008] ata10: SATA link down (SStatus 0 SControl 300)
[   10.689722] scsi 10:0:0:0: Direct-Access     ATA      WDC WD800BB-75CA 16.0 PQ: 0 ANSI: 5
[   10.891249] sd 10:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[   10.899493] sd 10:0:0:0: [sda] Write Protect is off
[   10.904465] sd 10:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   10.904490] sd 10:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   10.935678]  sda: sda1 sda2
[   10.939029] sd 10:0:0:0: [sda] Attached SCSI disk
[   10.951042] sd 10:0:0:0: Attached scsi generic sg0 type 0
[   11.299367] microcode: CPU0: family 15 not supported
[   11.306750] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   11.324565] device-mapper: uevent: version 1.0.3
[   11.329837] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[   11.366704] Btrfs loaded
[   11.469423] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   13.541791] udevd[332]: starting version 175
[   14.108655] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[   14.116734] ACPI: Power Button [PWRF]
[   14.295968] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   14.506349] EDAC MC: Ver: 2.1.0
[   14.522586] MCE: In-kernel MCE decoding enabled.
[   14.538120] powernow-k8: Found 1 AMD Sempron(tm) Processor 3400+ (1 cpu cores) (version 2.20.00)
[   14.547680] AMD64 EDAC driver v3.4.0
[   14.551401] EDAC amd64: DRAM ECC disabled.
[   14.555567] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[   14.555569]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   14.555571]  (Note that use of the override may cause unknown side effects.)
[   14.582663] powernow-k8: fid 0xc (2000 MHz), vid 0x4
[   14.587725] powernow-k8: fid 0xa (1800 MHz), vid 0x8
[   14.592752] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[   14.597866] powernow-k8: failing init, change pending bit set
[   14.623546] parport_pc 00:03: reported by Plug and Play ACPI
[   14.629413] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[   14.653943] i2c i2c-0: nForce2 SMBus adapter at 0x5480
[   14.660192] i2c i2c-1: nForce2 SMBus adapter at 0x54c0
[   14.792773] ACPI: PCI Interrupt Link [LAUD] enabled at IRQ 23
[   14.798814] snd_intel8x0 0000:00:04.0: setting latency timer to 64
[   14.856602] [drm] Initialized drm 1.1.0 20060810
[   14.912411] wmi: Mapper loaded
[   14.971775] IBM TrackPoint firmware: 0x0b, buttons: 3/3
[   14.998422] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input3
[   15.011418] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 16
[   15.018406] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x018100a3)
[   15.027355] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[   15.099972] [drm] nouveau 0000:01:00.0: ... appears to be valid
[   15.105968] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[   15.112322] [drm] nouveau 0000:01:00.0: BMP BIOS found
[   15.117528] [drm] nouveau 0000:01:00.0: BMP version 5.38
[   15.122910] [drm] nouveau 0000:01:00.0: Bios version 04.18.20.21
[   15.132371] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[   15.139242] [drm] nouveau 0000:01:00.0: DCB version 2.2
[   15.144534] [drm] nouveau 0000:01:00.0: DCB outp 00: 01000300 00009c40
[   15.151128] [drm] nouveau 0000:01:00.0: DCB outp 01: 02010310 00009c40
[   15.157736] [drm] nouveau 0000:01:00.0: DCB outp 02: 01010312 00000000
[   15.164351] [drm] nouveau 0000:01:00.0: DCB outp 03: 02020321 00000003
[   15.171274] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode
[   15.178685] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x71CA
[   15.186476] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x76A5
[   15.194250] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x7310
[   15.216939] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x79CB
[   15.224692] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x79E8
[   15.232441] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0x74EF
[   15.257301] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0x7640
[   15.265398] [TTM] Zone  kernel: Available graphics memory: 513336 kiB
[   15.271950] [TTM] Initializing pool allocator
[   15.276524] [TTM] Initializing DMA pool allocator
[   15.281321] [drm] nouveau 0000:01:00.0: Detected 64MiB VRAM (DDR1)
[   15.289656] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
[   15.295653] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[   15.370246] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   15.376960] [drm] No driver support for vblank timestamp query.
[   15.394907] [drm] nouveau 0000:01:00.0: 0 available performance level(s)
[   15.401683] [drm] nouveau 0000:01:00.0: c: core 274MHz memory 405MHz
[   15.408483] [drm] nouveau 0000:01:00.0: 0xDD32: Parsing digital output script table
[   15.434883] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
[   15.462697] intel8x0_measure_ac97_clock: measured 73502 usecs (3592 samples)
[   15.469827] intel8x0: clocking to 47146
[   15.560223] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo ffff88003ba02000
[   15.569117] fbcon: nouveaufb (fb0) is primary device
[   16.233930] [drm] nouveau 0000:01:00.0: 0xDD32: Parsing digital output script table
[   16.237935] Console: switching to colour frame buffer device 160x64
[   16.259371] fb0: nouveaufb frame buffer device
[   16.263848] drm: registered panic notifier
[   16.270518] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[   18.195227] Adding 8387580k swap on /dev/sda1.  Priority:-1 extents:1 across:8387580k 
[   18.226050] EXT4-fs (sda2): re-mounted. Opts: (null)
[   18.487136] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   18.622180] loop: module loaded
[   18.746833] w83627hf: w83627hf: Found W83627THF chip at 0x290
[   20.015172] NET: Registered protocol family 8
[   20.019581] NET: Registered protocol family 20
[   23.172332] Bluetooth: Core ver 2.16
[   23.176700] NET: Registered protocol family 31
[   23.181637] Bluetooth: HCI device and connection manager initialized
[   23.188481] Bluetooth: HCI socket layer initialized
[   23.193862] Bluetooth: L2CAP socket layer initialized
[   23.200187] Bluetooth: SCO socket layer initialized
[   23.232537] Bluetooth: RFCOMM TTY layer initialized
[   23.238201] Bluetooth: RFCOMM socket layer initialized
[   23.243829] Bluetooth: RFCOMM ver 1.11
[   23.294219] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   23.300046] Bluetooth: BNEP filters: protocol multicast
[   23.436136] powernow-k8: Found 1 AMD Sempron(tm) Processor 3400+ (1 cpu cores) (version 2.20.00)
[   23.445884] powernow-k8: fid 0xc (2000 MHz), vid 0x4
[   23.451349] powernow-k8: fid 0xa (1800 MHz), vid 0x8
[   23.456778] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[   23.462303] powernow-k8: failing init, change pending bit set