[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.78-1
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=952fb4da-576e-46f7-8173-64f8266e5027 ro console=ttyS0,115200 console=tty0
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001ff9f000 (usable)
[    0.000000]  BIOS-e820: 000000001ff9f000 - 0000000020000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: MSI MS-7135/MS-7135, BIOS 4.3-821-g4488d73 04/25/2016
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x1ff9f max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFE0000000 write-back
[    0.000000]   1 base 00F0000000 mask FFF8000000 write-combining
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [ffff8800000f05e0] f05e0
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-000000001ff9f000
[    0.000000]  0000000000 - 001fe00000 page 2M
[    0.000000]  001fe00000 - 001ff9f000 page 4k
[    0.000000] kernel direct mapping tables up to 1ff9f000 @ 1ff9c000-1ff9f000
[    0.000000] RAMDISK: 1efa2000 - 1fb24000
[    0.000000] ACPI: RSDP 0x00000000000F07D0 00024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x000000001FFB00E0 0005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x000000001FFB1A10 00074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x000000001FFB0280 01784 (v01 CORE   CB-DSDT  00000001 INTL 20160318)
[    0.000000] ACPI: FACS 0x000000001FFB0240 00040
[    0.000000] ACPI: SSDT 0x000000001FFB1B10 0023B (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: TCPA 0x000000001FFB1D50 00032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x000000001FFB1D90 00050 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x000000001FFB1DE0 00090 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x000000001FFB1E70 0002D (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x000000001FFB1EA0 00038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: Node 0 PXM 0 0-a0000
[    0.000000] SRAT: Node 0 PXM 0 100000-20000000
[    0.000000] NUMA: Initialized distance table, cnt=1
[    0.000000] NUMA: Node 0 [0,a0000) + [100000,1ff9f000) -> [0,1ff9f000)
[    0.000000] Initmem setup node 0 0000000000000000-000000001ff9f000
[    0.000000]   NODE_DATA [000000001ff97000 - 000000001ff9bfff]
[    0.000000]  [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001e200000-ffff88001e9fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0001ff9f
[    0.000000] On node 0 totalpages: 130862
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3922 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 1735 pages used for memmap
[    0.000000]   DMA32 zone: 125144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:e0000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001fc00000 s78912 r8192 d23488 u2097152
[    0.000000] pcpu-alloc: s78912 r8192 d23488 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 129066
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=952fb4da-576e-46f7-8173-64f8266e5027 ro console=ttyS0,115200 console=tty0
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ f8000000 size 64 MB
[    0.000000] Memory: 494856k/523900k available (3438k kernel code, 452k absent, 28592k reserved, 3301k data, 584k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:256 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2010.290 MHz processor.
[    0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.58 BogoMIPS (lpj=8041160)
[    0.016004] pid_max: default: 32768 minimum: 301
[    0.020064] Security Framework initialized
[    0.024010] AppArmor: AppArmor disabled by boot time parameter
[    0.028066] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.032511] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.036265] Mount-cache hash table entries: 256
[    0.040200] Initializing cgroup subsys cpuacct
[    0.044009] Initializing cgroup subsys memory
[    0.048023] Initializing cgroup subsys devices
[    0.052006] Initializing cgroup subsys freezer
[    0.056006] Initializing cgroup subsys net_cls
[    0.060006] Initializing cgroup subsys blkio
[    0.064016] Initializing cgroup subsys perf_event
[    0.068045] tseg: 0000000000
[    0.068066] mce: CPU supports 5 MCE banks
[    0.072043] SMP alternatives: switching to UP code
[    0.082326] Freeing SMP alternatives: 8k freed
[    0.084016] ACPI: Core revision 20110623
[    0.089242] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.133675] CPU0: AMD Sempron(tm) Processor 3400+ stepping 02
[    0.140008] Performance Events: AMD PMU driver.
[    0.140011] ... version:                0
[    0.144009] ... bit width:              48
[    0.148009] ... generic registers:      4
[    0.152010] ... value mask:             0000ffffffffffff
[    0.156010] ... max period:             00007fffffffffff
[    0.160010] ... fixed-purpose events:   0
[    0.164010] ... event mask:             000000000000000f
[    0.168245] NMI watchdog enabled, takes one hw-pmu counter.
[    0.172040] Brought up 1 CPUs
[    0.176014] Total of 1 processors activated (4020.58 BogoMIPS).
[    0.180511] devtmpfs: initialized
[    0.187605] print_constraints: dummy: 
[    0.188090] NET: Registered protocol family 16
[    0.192156] node 0 link 0: io port [1000, 2fff]
[    0.192160] TOM: 0000000020000000 aka 512M
[    0.196016] node 0 link 0: mmio [a0000, bffff]
[    0.196020] node 0 link 0: mmio [fc000000, fd2fffff]
[    0.196023] node 0 link 0: mmio [f0000000, f7ffffff]
[    0.196027] bus: [00, 03] on node 0 link 0
[    0.196031] bus: 00 index 0 [io  0x0000-0xffff]
[    0.196034] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[    0.196038] bus: 00 index 2 [mem 0xf8000000-0xfcffffffff]
[    0.196041] bus: 00 index 3 [mem 0x20000000-0xf7ffffff]
[    0.196055] ACPI: bus type pci registered
[    0.200094] PCI: Using configuration type 1 for base access
[    0.204950] bio: create slab <bio-0> at 0
[    0.208137] ACPI: Added _OSI(Module Device)
[    0.212019] ACPI: Added _OSI(Processor Device)
[    0.216015] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.220015] ACPI: Added _OSI(Processor Aggregator Device)
[    0.224302] ACPI: EC: Look up EC in DSDT
[    0.224559] ACPI: Executed 1 blocks of module-level executable AML code
[    0.233129] ACPI: Interpreter enabled
[    0.236019] ACPI: (supports S0 S5)
[    0.240665] ACPI: Using IOAPIC for interrupt routing
[    0.248795] ACPI: No dock devices found.
[    0.252019] HEST: Table not found.
[    0.256020] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.261807] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-03])
[    0.269059] pci_root PNP0A03:00: host bridge window [io  0x03b0-0x03df]
[    0.272019] pci_root PNP0A03:00: host bridge window [io  0x0d00-0x2fff]
[    0.276019] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xf7ffffff]
[    0.280019] pci_root PNP0A03:00: host bridge window [mem 0xfc000000-0xfd2fffff]
[    0.284019] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.288020] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.292021] pci_root PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x0000-0x0cf7] ignored
[    0.296039] pci 0000:00:00.0: [10de:005e] type 0 class 0x000580
[    0.296115] pci 0000:00:01.0: [10de:0050] type 0 class 0x000601
[    0.296122] pci 0000:00:01.0: reg 10: [io  0x2400-0x247f]
[    0.296153] pci 0000:00:01.1: [10de:0052] type 0 class 0x000c05
[    0.296161] pci 0000:00:01.1: reg 10: [io  0x2800-0x281f]
[    0.296174] pci 0000:00:01.1: reg 20: [io  0x2480-0x24bf]
[    0.296180] pci 0000:00:01.1: reg 24: [io  0x24c0-0x24ff]
[    0.296195] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.296214] pci 0000:00:02.0: [10de:005a] type 0 class 0x000c03
[    0.296222] pci 0000:00:02.0: reg 10: [mem 0xfd200000-0xfd200fff]
[    0.296250] pci 0000:00:02.0: supports D1 D2
[    0.296252] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.296268] pci 0000:00:02.1: [10de:005b] type 0 class 0x000c03
[    0.296277] pci 0000:00:02.1: reg 10: [mem 0xfd205000-0xfd2050ff]
[    0.296310] pci 0000:00:02.1: supports D1 D2
[    0.296312] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.296337] pci 0000:00:04.0: [10de:0059] type 0 class 0x000401
[    0.296345] pci 0000:00:04.0: reg 10: [io  0x1c00-0x1cff]
[    0.296350] pci 0000:00:04.0: reg 14: [io  0x2000-0x20ff]
[    0.296356] pci 0000:00:04.0: reg 18: [mem 0xfd201000-0xfd201fff]
[    0.296378] pci 0000:00:04.0: supports D1 D2
[    0.296391] pci 0000:00:06.0: [10de:0053] type 0 class 0x000101
[    0.296409] pci 0000:00:06.0: reg 20: [io  0x2820-0x282f]
[    0.296437] pci 0000:00:07.0: [10de:0054] type 0 class 0x000101
[    0.296444] pci 0000:00:07.0: reg 10: [io  0x2850-0x2857]
[    0.296450] pci 0000:00:07.0: reg 14: [io  0x2878-0x287b]
[    0.296455] pci 0000:00:07.0: reg 18: [io  0x2858-0x285f]
[    0.296460] pci 0000:00:07.0: reg 1c: [io  0x287c-0x287f]
[    0.296465] pci 0000:00:07.0: reg 20: [io  0x2830-0x283f]
[    0.296471] pci 0000:00:07.0: reg 24: [mem 0xfd202000-0xfd202fff]
[    0.296495] pci 0000:00:08.0: [10de:0055] type 0 class 0x000101
[    0.296503] pci 0000:00:08.0: reg 10: [io  0x2860-0x2867]
[    0.296508] pci 0000:00:08.0: reg 14: [io  0x2880-0x2883]
[    0.296514] pci 0000:00:08.0: reg 18: [io  0x2868-0x286f]
[    0.296519] pci 0000:00:08.0: reg 1c: [io  0x2884-0x2887]
[    0.296524] pci 0000:00:08.0: reg 20: [io  0x2840-0x284f]
[    0.296529] pci 0000:00:08.0: reg 24: [mem 0xfd203000-0xfd203fff]
[    0.296554] pci 0000:00:09.0: [10de:005c] type 1 class 0x000604
[    0.296585] pci 0000:00:0a.0: [10de:0057] type 0 class 0x000680
[    0.296594] pci 0000:00:0a.0: reg 10: [mem 0xfd204000-0xfd204fff]
[    0.296600] pci 0000:00:0a.0: reg 14: [io  0x2870-0x2877]
[    0.296630] pci 0000:00:0a.0: supports D1 D2
[    0.296632] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.296652] pci 0000:00:0d.0: [10de:005d] type 1 class 0x000604
[    0.296680] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.296700] pci 0000:00:0e.0: [10de:005d] type 1 class 0x000604
[    0.296727] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.296748] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[    0.296771] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[    0.296790] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[    0.296809] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[    0.296849] pci 0000:01:00.0: [10de:0181] type 0 class 0x000300
[    0.296861] pci 0000:01:00.0: reg 10: [mem 0xfc000000-0xfcffffff]
[    0.296869] pci 0000:01:00.0: reg 14: [mem 0xf0000000-0xf7ffffff pref]
[    0.296893] pci 0000:01:00.0: reg 30: [mem 0xfd000000-0xfd01ffff pref]
[    0.296942] pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode)
[    0.300022] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfd0fffff]
[    0.300026] pci 0000:00:09.0:   bridge window [mem 0xf0000000-0xf7ffffff pref]
[    0.300029] pci 0000:00:09.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.300033] pci 0000:00:09.0:   bridge window [io  0x0d00-0x2fff] (subtractive decode)
[    0.300036] pci 0000:00:09.0:   bridge window [mem 0xf0000000-0xf7ffffff] (subtractive decode)
[    0.300040] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfd2fffff] (subtractive decode)
[    0.300044] pci 0000:00:09.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.300081] pci 0000:02:00.0: [1b73:1000] type 0 class 0x000c03
[    0.300093] pci 0000:02:00.0: reg 10: [mem 0xfd100000-0xfd10ffff]
[    0.300172] pci 0000:02:00.0: PME# supported from D0 D3hot
[    0.308033] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[    0.312024] pci 0000:00:0d.0:   bridge window [mem 0xfd100000-0xfd1fffff]
[    0.312045] pci 0000:00:0e.0: PCI bridge to [bus 03-03]
[    0.316032] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.316164] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIC._PRT]
[    0.316246]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    0.330179] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    0.336467] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    0.341778] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 *18 19)
[    0.349174] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 *19)
[    0.353778] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    0.359002] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0
[    0.365392] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    0.369782] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 22 *23)
[    0.373780] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 *23)
[    0.380477] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    0.388106] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    0.394994] ACPI: PCI Interrupt Link [LSA0] (IRQs *20 21 22 23)
[    0.397779] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 *21 22 23)
[    0.404345] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 *22 23)
[    0.409880] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.412029] vgaarb: loaded
[    0.416027] vgaarb: bridge control possible 0000:01:00.0
[    0.420093] PCI: Using ACPI for IRQ routing
[    0.424030] PCI: pci_cache_line_size set to 64 bytes
[    0.424088] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.424092] reserve RAM buffer: 000000001ff9f000 - 000000001fffffff 
[    0.424256] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.428032] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    0.433187] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.440122] Switching to clocksource hpet
[    0.446333] pnp: PnP ACPI init
[    0.449505] ACPI: bus type pnp registered
[    0.455409] pnp 00:00: [bus 00-03]
[    0.455412] pnp 00:00: [io  0x03b0-0x03df window]
[    0.455415] pnp 00:00: [io  0x0d00-0x2fff window]
[    0.455419] pnp 00:00: [mem 0xf0000000-0xf7ffffff window]
[    0.455422] pnp 00:00: [mem 0xfc000000-0xfd2fffff window]
[    0.455425] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.455428] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.455432] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.455496] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.455717] pnp 00:01: [io  0x0060]
[    0.455720] pnp 00:01: [io  0x0064]
[    0.455734] pnp 00:01: [irq 1]
[    0.455770] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.455804] pnp 00:02: [irq 12]
[    0.455839] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.455868] pnp 00:03: [io  0x0378-0x0387]
[    0.455875] pnp 00:03: [irq 7]
[    0.455911] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.455942] pnp 00:04: [io  0x03f0-0x03f7]
[    0.455949] pnp 00:04: [irq 6]
[    0.455952] pnp 00:04: [dma 2]
[    0.455987] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.455993] pnp: PnP ACPI: found 5 devices
[    0.460163] ACPI: ACPI bus type pnp unregistered
[    0.471905] PCI: max bus depth: 1 pci_try_num: 2
[    0.471936] pci 0000:00:09.0: PCI bridge to [bus 01-01]
[    0.477245] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfd0fffff]
[    0.484106] pci 0000:00:09.0:   bridge window [mem 0xf0000000-0xf7ffffff pref]
[    0.491421] pci 0000:00:0d.0: PCI bridge to [bus 02-02]
[    0.496716] pci 0000:00:0d.0:   bridge window [mem 0xfd100000-0xfd1fffff]
[    0.503571] pci 0000:00:0e.0: PCI bridge to [bus 03-03]
[    0.508875] pci 0000:00:09.0: setting latency timer to 64
[    0.508881] pci 0000:00:0d.0: setting latency timer to 64
[    0.508887] pci 0000:00:0e.0: setting latency timer to 64
[    0.508891] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.508894] pci_bus 0000:00: resource 5 [io  0x0d00-0x2fff]
[    0.508897] pci_bus 0000:00: resource 6 [mem 0xf0000000-0xf7ffffff]
[    0.508900] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfd2fffff]
[    0.508903] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[    0.508907] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfd0fffff]
[    0.508910] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff pref]
[    0.508913] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
[    0.508916] pci_bus 0000:01: resource 5 [io  0x0d00-0x2fff]
[    0.508919] pci_bus 0000:01: resource 6 [mem 0xf0000000-0xf7ffffff]
[    0.508922] pci_bus 0000:01: resource 7 [mem 0xfc000000-0xfd2fffff]
[    0.508925] pci_bus 0000:01: resource 8 [mem 0x000a0000-0x000bffff]
[    0.508928] pci_bus 0000:02: resource 1 [mem 0xfd100000-0xfd1fffff]
[    0.509001] NET: Registered protocol family 2
[    0.515484] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.522800] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[    0.534553] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.541464] TCP: Hash tables configured (established 16384 bind 16384)
[    0.548069] TCP reno registered
[    0.551272] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.557184] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.563651] NET: Registered protocol family 1
[    0.568309] ACPI: PCI Interrupt Link [LUOH] enabled at IRQ 23
[    0.574280] ACPI: PCI Interrupt Link [LUEH] enabled at IRQ 22
[    0.580157] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.585743] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.591328] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.596886] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    0.602530] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.608118] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.613674] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    0.619317] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.624886] pci 0000:01:00.0: Boot video device
[    0.625014] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19
[    0.630867] PCI: CLS 64 bytes, default 64
[    0.630944] Unpacking initramfs...
[    0.984822] Freeing initrd memory: 11784k freed
[    1.001315] agpgart-amd64 0000:01:00.0: AGP bridge [10de/0181]
[    1.007248] agpgart-amd64 0000:01:00.0: aperture from AGP @ f0000008fc000000 size 0 MB
[    1.015261] pci 0000:00:18.3: no usable aperture found
[    1.020470] pci 0000:00:18.3: consider rebooting with iommu=memaper=2 to get a good aperture
[    1.029088] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.037246] audit: initializing netlink socket (disabled)
[    1.042736] type=2000 audit(1463062487.040:1): initialized
[    1.065212] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.071908] VFS: Disk quotas dquot_6.5.2
[    1.075939] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.082536] msgmni has been set to 989
[    1.086547] alg: No test for stdrng (krng)
[    1.090750] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.098246] io scheduler noop registered
[    1.102240] io scheduler deadline registered
[    1.106597] io scheduler cfq registered (default)
[    1.111567] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.117240] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.123921] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    1.130684] ERST: Table is not found!
[    1.134412] GHES: HEST is not enabled!
[    1.138329] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.164959] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.191332] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.197767] Linux agpgart interface v0.103
[    1.202072] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    1.212542] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.217581] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.222851] mousedev: PS/2 mouse device common for all mice
[    1.228597] rtc_cmos rtc_cmos: RTC can wake from S4
[    1.233680] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    1.240143] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    1.246939] cpuidle: using governor ladder
[    1.251104] cpuidle: using governor menu
[    1.255367] TCP cubic registered
[    1.258707] NET: Registered protocol family 10
[    1.263809] Mobile IPv6
[    1.266333] NET: Registered protocol family 17
[    1.270858] Registering the dns_resolver key type
[    1.275793] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.284629] PM: Hibernation image not present or could not be loaded.
[    1.284643] registered taskstats version 1
[    1.289070] rtc_cmos rtc_cmos: setting system clock to 2016-05-12 14:14:48 UTC (1463062488)
[    1.297636] Initializing network drop monitor service
[    1.304274] Freeing unused kernel memory: 584k freed
[    1.309813] Write protecting the kernel read-only data: 6144k
[    1.318906] Freeing unused kernel memory: 640k freed
[    1.327960] Freeing unused kernel memory: 684k freed
[    1.356330] udevd[44]: starting version 175
[    1.427586] usbcore: registered new interface driver usbfs
[    1.442306] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.458810] SCSI subsystem initialized
[    1.483095] Floppy drive(s): fd0 is 1.44M
[    1.501808] ACPI: PCI Interrupt Link [LEMA] enabled at IRQ 21
[    1.509172] libata version 3.00 loaded.
[    1.530643] usbcore: registered new interface driver hub
[    1.544712] forcedeth 0000:00:0a.0: setting latency timer to 64
[    1.552243] usbcore: registered new device driver usb
[    1.558242] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.564944] xhci_hcd 0000:02:00.0: setting latency timer to 64
[    1.564949] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    1.581935] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[    1.709522] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.716387] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.723730] usb usb1: Product: xHCI Host Controller
[    1.728681] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[    1.734758] usb usb1: SerialNumber: 0000:02:00.0
[    1.739677] xHCI xhci_add_endpoint called for root hub
[    1.739681] xHCI xhci_check_bandwidth called for root hub
[    1.739757] hub 1-0:1.0: USB hub found
[    1.743589] hub 1-0:1.0: 1 port detected
[    1.747660] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    1.752967] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    1.760480] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.767336] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.774648] usb usb2: Product: xHCI Host Controller
[    1.779598] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[    1.785673] usb usb2: SerialNumber: 0000:02:00.0
[    1.790520] xHCI xhci_add_endpoint called for root hub
[    1.790524] xHCI xhci_check_bandwidth called for root hub
[    1.790595] hub 2-0:1.0: USB hub found
[    1.794421] hub 2-0:1.0: 1 port detected
[    1.801709] FDC 0 is a post-1991 82077
[    2.036016] Refined TSC clocksource calibration: 2010.302 MHz.
[    2.041927] Switching to clocksource tsc
[    2.068725] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d3:16:e4:55
[    2.077179] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[    2.084946] pata_amd 0000:00:06.0: version 0.4.1
[    2.085013] pata_amd 0000:00:06.0: setting latency timer to 64
[    2.085644] scsi0 : pata_amd
[    2.088812] scsi1 : pata_amd
[    2.091855] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2820 irq 14
[    2.098920] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2828 irq 15
[    2.106261] sata_nv 0000:00:07.0: version 3.5
[    2.106422] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[    2.112503] sata_nv 0000:00:07.0: setting latency timer to 64
[    2.113042] scsi2 : sata_nv
[    2.116069] scsi3 : sata_nv
[    2.119035] ata3: SATA max UDMA/133 cmd 0x2850 ctl 0x2878 bmdma 0x2830 irq 20
[    2.126252] ata4: SATA max UDMA/133 cmd 0x2858 ctl 0x287c bmdma 0x2838 irq 20
[    2.133676] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 21
[    2.139608] sata_nv 0000:00:08.0: setting latency timer to 64
[    2.140187] scsi4 : sata_nv
[    2.143179] scsi5 : sata_nv
[    2.146156] ata5: SATA max UDMA/133 cmd 0x2860 ctl 0x2880 bmdma 0x2840 irq 21
[    2.153365] ata6: SATA max UDMA/133 cmd 0x2868 ctl 0x2884 bmdma 0x2848 irq 21
[    2.161077] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    2.161082] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    2.166513] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
[    2.174030] ehci_hcd 0000:00:02.1: debug port 1
[    2.178633] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[    2.178661] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfd205000
[    2.196008] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.201856] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.208718] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.216031] usb usb3: Product: EHCI Host Controller
[    2.220971] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    2.227045] usb usb3: SerialNumber: 0000:00:02.1
[    2.233014] hub 3-0:1.0: USB hub found
[    2.238621] hub 3-0:1.0: 10 ports detected
[    2.277100] ata1.00: HPA detected: current 156250000, native 156301488
[    2.283704] ata1.00: ATA-5: WDC WD800BB-75CAA0, 16.06V16, max UDMA/100
[    2.290297] ata1.00: 156250000 sectors, multi 0: LBA 
[    2.295415] ata1: nv_mode_filter: 0x3f39f&0xfffff->0x3f39f, BIOS=0x0 (0x0) ACPI=0x0
[    2.309027] ata1.00: configured for UDMA/100
[    2.313497] scsi 0:0:0:0: Direct-Access     ATA      WDC WD800BB-75CA 16.0 PQ: 0 ANSI: 5
[    2.448013] ata3: SATA link down (SStatus 0 SControl 300)
[    2.486828] ata5: SATA link down (SStatus 0 SControl 300)
[    2.552008] usb 3-7: new high-speed USB device number 2 using ehci_hcd
[    2.689150] usb 3-7: New USB device found, idVendor=1058, idProduct=1140
[    2.695923] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[    2.703125] usb 3-7: Product: My Book 1140
[    2.707287] usb 3-7: Manufacturer: Western Digital
[    2.712145] usb 3-7: SerialNumber: 354C52375247444D
[    2.721847] Initializing USB Mass Storage driver...
[    2.726964] scsi6 : usb-storage 3-7:1.0
[    2.731314] usbcore: registered new interface driver usb-storage
[    2.737416] USB Mass Storage support registered.
[    2.800012] ata4: SATA link down (SStatus 0 SControl 300)
[    3.116009] ata6: SATA link down (SStatus 0 SControl 300)
[    3.122751] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.142737] sd 0:0:0:0: [sda] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    3.150818] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    3.150823] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    3.156173] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 4
[    3.163749] sd 0:0:0:0: [sda] Write Protect is off
[    3.168604] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.168628] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.177811] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfd200000
[    3.207368]  sda: sda1 sda2
[    3.210709] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.218443] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.238046] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    3.244916] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.252226] usb usb4: Product: OHCI Host Controller
[    3.257167] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[    3.263241] usb usb4: SerialNumber: 0000:00:02.0
[    3.272652] hub 4-0:1.0: USB hub found
[    3.276495] hub 4-0:1.0: 10 ports detected
[    3.604498] microcode: CPU0: family 15 not supported
[    3.611901] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    3.629791] device-mapper: uevent: version 1.0.3
[    3.635091] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    3.672245] Btrfs loaded
[    3.729276] scsi 6:0:0:0: Direct-Access     WD       My Book 1140     1019 PQ: 0 ANSI: 6
[    3.742829] scsi 6:0:0:1: Enclosure         WD       SES Device       1019 PQ: 0 ANSI: 6
[    3.763206] sd 6:0:0:0: Attached scsi generic sg1 type 0
[    3.768935] sd 6:0:0:0: [sdb] 19522816 4096-byte logical blocks: (79.9 GB/74.4 GiB)
[    3.782245] scsi 6:0:0:1: Attached scsi generic sg2 type 13
[    3.788697] sd 6:0:0:0: [sdb] Write Protect is off
[    3.793590] sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
[    3.796060] sd 6:0:0:0: [sdb] No Caching mode page found
[    3.801444] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    3.808664] sd 6:0:0:0: [sdb] 19522816 4096-byte logical blocks: (79.9 GB/74.4 GiB)
[    3.817904] sd 6:0:0:0: [sdb] No Caching mode page found
[    3.823284] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    8.869539]  sdb: unknown partition table
[    8.875436] sd 6:0:0:0: [sdb] 19522816 4096-byte logical blocks: (79.9 GB/74.4 GiB)
[    8.887574] sd 6:0:0:0: [sdb] No Caching mode page found
[    8.892989] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    8.899152] sd 6:0:0:0: [sdb] Attached SCSI disk
[    8.956499] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    9.021185] ses 6:0:0:1: Attached Enclosure device
[   11.027943] udevd[317]: starting version 175
[   11.631664] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[   11.652200] ACPI: Power Button [PWRF]
[   11.809479] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   11.997915] EDAC MC: Ver: 2.1.0
[   12.019601] MCE: In-kernel MCE decoding enabled.
[   12.028545] powernow-k8: Found 1 AMD Sempron(tm) Processor 3400+ (1 cpu cores) (version 2.20.00)
[   12.038088] powernow-k8: fid 0xc (2000 MHz), vid 0x4
[   12.043154] powernow-k8: fid 0xa (1800 MHz), vid 0x8
[   12.048183] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[   12.053299] powernow-k8: failing init, change pending bit set
[   12.126892] AMD64 EDAC driver v3.4.0
[   12.131099] EDAC amd64: DRAM ECC disabled.
[   12.135292] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[   12.135294]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   12.135296]  (Note that use of the override may cause unknown side effects.)
[   12.260139] parport_pc 00:03: reported by Plug and Play ACPI
[   12.266368] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[   12.292887] [drm] Initialized drm 1.1.0 20060810
[   12.343906] i2c i2c-0: nForce2 SMBus adapter at 0x2480
[   12.349428] i2c i2c-1: nForce2 SMBus adapter at 0x24c0
[   12.505536] wmi: Mapper loaded
[   12.860633] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 16
[   12.867399] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x018100a3)
[   12.876682] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[   12.948346] [drm] nouveau 0000:01:00.0: ... appears to be valid
[   12.954336] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[   12.960692] [drm] nouveau 0000:01:00.0: BMP BIOS found
[   12.965897] [drm] nouveau 0000:01:00.0: BMP version 5.38
[   12.971280] [drm] nouveau 0000:01:00.0: Bios version 04.18.20.21
[   12.978612] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[   12.985504] [drm] nouveau 0000:01:00.0: DCB version 2.2
[   12.990799] [drm] nouveau 0000:01:00.0: DCB outp 00: 01000300 00009c40
[   12.997392] [drm] nouveau 0000:01:00.0: DCB outp 01: 02010310 00009c40
[   13.004009] [drm] nouveau 0000:01:00.0: DCB outp 02: 01010312 00000000
[   13.010683] [drm] nouveau 0000:01:00.0: DCB outp 03: 02020321 00000003
[   13.017603] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode
[   13.025011] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x71CA
[   13.032812] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x76A5
[   13.040590] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x7310
[   13.063281] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x79CB
[   13.071035] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x79E8
[   13.078785] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0x74EF
[   13.102969] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0x7640
[   13.111068] [TTM] Zone  kernel: Available graphics memory: 254278 kiB
[   13.117616] [TTM] Initializing pool allocator
[   13.122293] [TTM] Initializing DMA pool allocator
[   13.127095] [drm] nouveau 0000:01:00.0: Detected 64MiB VRAM (DDR1)
[   13.137913] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
[   13.143937] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[   13.218883] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   13.225599] [drm] No driver support for vblank timestamp query.
[   13.237676] [drm] nouveau 0000:01:00.0: 0 available performance level(s)
[   13.244458] [drm] nouveau 0000:01:00.0: c: core 274MHz memory 405MHz
[   13.251340] [drm] nouveau 0000:01:00.0: 0xDD32: Parsing digital output script table
[   13.277474] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
[   13.306581] ACPI: PCI Interrupt Link [LAUD] enabled at IRQ 23
[   13.312439] snd_intel8x0 0000:00:04.0: setting latency timer to 64
[   13.392235] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo ffff88001d73f400
[   13.401259] fbcon: nouveaufb (fb0) is primary device
[   14.066052] [drm] nouveau 0000:01:00.0: 0xDD32: Parsing digital output script table
[   14.071654] Console: switching to colour frame buffer device 160x64
[   14.093666] fb0: nouveaufb frame buffer device
[   14.098224] drm: registered panic notifier
[   14.104841] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[   14.180013] intel8x0_measure_ac97_clock: measured 52523 usecs (2584 samples)
[   14.187119] intel8x0: clocking to 46832
[   15.873298] Adding 8387580k swap on /dev/sda1.  Priority:-1 extents:1 across:8387580k 
[   15.904611] EXT4-fs (sda2): re-mounted. Opts: (null)
[   16.165708] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   16.298380] loop: module loaded
[   16.395898] w83627hf: w83627hf: Found W83627THF chip at 0x290
[   17.734544] NET: Registered protocol family 8
[   17.738948] NET: Registered protocol family 20
[   20.782481] Bluetooth: Core ver 2.16
[   20.786881] NET: Registered protocol family 31
[   20.791867] Bluetooth: HCI device and connection manager initialized
[   20.798723] Bluetooth: HCI socket layer initialized
[   20.804099] Bluetooth: L2CAP socket layer initialized
[   20.810171] Bluetooth: SCO socket layer initialized
[   20.912115] Bluetooth: RFCOMM TTY layer initialized
[   20.917976] Bluetooth: RFCOMM socket layer initialized
[   20.923621] Bluetooth: RFCOMM ver 1.11
[   20.930880] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   20.936711] Bluetooth: BNEP filters: protocol multicast
[   21.080236] powernow-k8: Found 1 AMD Sempron(tm) Processor 3400+ (1 cpu cores) (version 2.20.00)
[   21.089695] powernow-k8: fid 0xc (2000 MHz), vid 0x4
[   21.095152] powernow-k8: fid 0xa (1800 MHz), vid 0x8
[   21.100598] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[   21.106129] powernow-k8: failing init, change pending bit set