[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13)
[    0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64 
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff99fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bff9a000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 10/28/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000F8000000 mask FFFFFC000000 write-combining
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000180000000 aka 6144M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xbff9a max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f0660-0x000f066f] mapped at [ffff8800000f0660]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
[    0.000000]  [mem 0x17fe00000-0x17fffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
[    0.000000]  [mem 0x17c000000-0x17fdfffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
[    0.000000]  [mem 0x100000000-0x17bffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbff99fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0xbfdfffff] page 2M
[    0.000000]  [mem 0xbfe00000-0xbff99fff] page 4k
[    0.000000] RAMDISK: [mem 0x7f24c000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0830 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000BFFAB0E0 00006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000BFFAD8D0 000074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000BFFAB280 002644 (v02 ASUS   COREBOOT 00000001 INTL 20150619)
[    0.000000] ACPI: FACS 0x00000000BFFAB240 000040
[    0.000000] ACPI: SSDT 0x00000000BFFAD9D0 000EEA (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: TCPA 0x00000000BFFAE8C0 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x00000000BFFAE900 0000C6 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000BFFAE9D0 000150 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000BFFAEB20 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000BFFAEB50 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000BFFAEB90 000150 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000BFFAECE0 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
[    0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=2
[    0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
[    0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[    0.000000]   NODE_DATA [mem 0x13fffb000-0x13fffffff]
[    0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
[    0.000000]   NODE_DATA [mem 0x17fff8000-0x17fffcfff]
[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
[    0.000000]  [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x17fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xbff99fff]
[    0.000000]   node   0: [mem 0x100000000-0x13fffffff]
[    0.000000]   node   1: [mem 0x140000000-0x17fffffff]
[    0.000000] On node 0 totalpages: 1048376
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10695 pages used for memmap
[    0.000000]   DMA32 zone: 782234 pages, LIFO batch:31
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] On node 1 totalpages: 262144
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbff9a000-0xcfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
[    0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 
[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1292580
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64 
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xb5ea000000-0xb5ebffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[    0.000000] Memory: 5012208K/5242080K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 229872K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour *CGA 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1909.669 MHz processor
[    0.000157] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.33 BogoMIPS (lpj=7638676)
[    0.010796] pid_max: default: 32768 minimum: 301
[    0.015441] ACPI: Core revision 20140424
[    0.021821] ACPI: All ACPI Tables successfully acquired
[    0.027169] Security Framework initialized
[    0.031289] AppArmor: AppArmor disabled by boot time parameter
[    0.037123] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.044834] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.057955] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.067656] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.074555] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.082404] Initializing cgroup subsys memory
[    0.086786] Initializing cgroup subsys devices
[    0.091247] Initializing cgroup subsys freezer
[    0.095702] Initializing cgroup subsys net_cls
[    0.100159] Initializing cgroup subsys blkio
[    0.104455] Initializing cgroup subsys perf_event
[    0.109172] Initializing cgroup subsys net_prio
[    0.113760] tseg: 0000000000
[    0.113771] CPU: Physical Processor ID: 0
[    0.117791] CPU: Processor Core ID: 0
[    0.121474] mce: CPU supports 6 MCE banks
[    0.125502] LVT offset 0 assigned for vector 0xf9
[    0.130221] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.145560] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
[    0.154568] ftrace: allocating 21614 entries in 85 pages
[    0.169881] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.215403] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
[    0.332518] Performance Events: AMD PMU driver.
[    0.337096] ... version:                0
[    0.341111] ... bit width:              48
[    0.345209] ... generic registers:      4
[    0.349219] ... value mask:             0000ffffffffffff
[    0.354520] ... max period:             00007fffffffffff
[    0.359839] ... fixed-purpose events:   0
[    0.363869] ... event mask:             000000000000000f
[    0.371744] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.379944] x86: Booting SMP configuration:
[    0.384137] .... node  #0, CPUs:      #1 #2 #3
[    0.428528] .... node  #1, CPUs:   #4 #5 #6 #7
[    0.581162] x86: Booted up 2 nodes, 8 CPUs
[    0.585464] smpboot: Total of 8 processors activated (30556.53 BogoMIPS)
[    0.597954] devtmpfs: initialized
[    0.609263] pinctrl core: initialized pinctrl subsystem
[    0.614665] NET: Registered protocol family 16
[    0.619325] cpuidle: using governor ladder
[    0.623428] cpuidle: using governor menu
[    0.627366] node 0 link 1: io port [1000, 3fff]
[    0.627369] TOM: 00000000c0000000 aka 3072M
[    0.631563] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
[    0.631567] node 0 link 1: mmio [fc000000, fc3fffff]
[    0.631570] node 0 link 1: mmio [f8000000, fbffffff]
[    0.631572] TOM2: 0000000180000000 aka 6144M
[    0.635851] bus: [bus 00-05] on node 0 link 1
[    0.635853] bus: 00 [io  0x0000-0xffff]
[    0.635855] bus: 00 [mem 0xd0000000-0xffffffff]
[    0.635856] bus: 00 [mem 0x180000000-0xfcffffffff]
[    0.635965] ACPI: bus type PCI registered
[    0.639984] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.646587] PCI: Using configuration type 1 for base access
[    0.652164] PCI: Using configuration type 1 for extended access
[    0.669338] ACPI: Added _OSI(Module Device)
[    0.673530] ACPI: Added _OSI(Processor Device)
[    0.677983] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.682694] ACPI: Added _OSI(Processor Aggregator Device)
[    0.691644] ACPI: Interpreter enabled
[    0.695332] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.704597] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[    0.713867] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[    0.723142] ACPI: (supports S0 S1 S5)
[    0.726810] ACPI: Using IOAPIC for interrupt routing
[    0.731827] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.761085] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[    0.767275] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.775486] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.816725] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.826747] PCI host bridge to bus 0000:00
[    0.830855] pci_bus 0000:00: root bus resource [bus 00-05]
[    0.836344] pci_bus 0000:00: root bus resource [io  0x0d00-0x3fff]
[    0.842531] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.849410] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[    0.856289] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
[    0.863168] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.869366] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.869572] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[    0.869580] pci 0000:00:01.0: reg 0x10: [io  0x2c00-0x2c7f]
[    0.869709] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.869717] pci 0000:00:01.1: reg 0x10: [io  0x3000-0x301f]
[    0.869735] pci 0000:00:01.1: reg 0x20: [io  0x2c80-0x2cbf]
[    0.869740] pci 0000:00:01.1: reg 0x24: [io  0x2cc0-0x2cff]
[    0.869760] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.869869] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.869877] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
[    0.869929] pci 0000:00:02.0: supports D1 D2
[    0.869939] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.869989] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.875715] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.875730] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
[    0.875771] pci 0000:00:02.1: supports D1 D2
[    0.875774] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.875819] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.881546] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.881572] pci 0000:00:06.0: reg 0x20: [io  0x3020-0x302f]
[    0.881597] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.888734] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.895267] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.902406] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.909057] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.909068] pci 0000:00:07.0: reg 0x10: [io  0x3050-0x3057]
[    0.909073] pci 0000:00:07.0: reg 0x14: [io  0x3070-0x3073]
[    0.909078] pci 0000:00:07.0: reg 0x18: [io  0x3058-0x305f]
[    0.909083] pci 0000:00:07.0: reg 0x1c: [io  0x3074-0x3077]
[    0.909087] pci 0000:00:07.0: reg 0x20: [io  0x3030-0x303f]
[    0.909092] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
[    0.909242] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.909250] pci 0000:00:08.0: reg 0x10: [io  0x3060-0x3067]
[    0.909254] pci 0000:00:08.0: reg 0x14: [io  0x3078-0x307b]
[    0.909259] pci 0000:00:08.0: reg 0x18: [io  0x3068-0x306f]
[    0.909264] pci 0000:00:08.0: reg 0x1c: [io  0x307c-0x307f]
[    0.909268] pci 0000:00:08.0: reg 0x20: [io  0x3040-0x304f]
[    0.909273] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
[    0.909381] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[    0.909469] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.915194] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.915245] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.915292] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.921011] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.921064] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.921110] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.926838] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.926877] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.926939] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.932662] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.932722] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.932796] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.938519] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.938648] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.938754] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.938903] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.939025] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.939141] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[    0.939298] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[    0.939452] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[    0.939574] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[    0.939770] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[    0.939969] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[    0.939995] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.940008] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
[    0.940023] pci 0000:01:04.0: reg 0x18: [io  0x1000-0x107f]
[    0.940071] pci 0000:01:04.0: supports D1 D2
[    0.940192] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.945172] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    0.945175] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.945178] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    0.945260] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[    0.945318] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
[    0.945344] pci 0000:02:00.0: reg 0x30: [mem 0x69c00000-0x69c0ffff pref]
[    0.945448] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.945570] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.955572] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.960541] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.960631] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[    0.960668] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
[    0.960770] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.960863] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.970867] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.975840] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    0.975915] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.980953] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    0.985939] pci_bus 0000:00: on NUMA node 0
[    0.986040] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    0.992181] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    0.998316] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    1.005618] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    1.012917] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    1.020211] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[    1.027501] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    1.033636] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[    1.039769] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[    1.047062] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    1.054365] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    1.061657] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[    1.067779] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[    1.073927] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[    1.081215] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[    1.088519] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[    1.095819] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.104340] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[    1.110789] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[    1.117243] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[    1.123699] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[    1.130454] ACPI: Enabled 1 GPEs in block 00 to 1F
[    1.135581] vgaarb: setting as boot device: PCI:0000:01:04.0
[    1.141255] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[    1.149351] vgaarb: loaded
[    1.152065] vgaarb: bridge control possible 0000:01:04.0
[    1.157538] PCI: Using ACPI for IRQ routing
[    1.161730] PCI: pci_cache_line_size set to 64 bytes
[    1.161790] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.161793] e820: reserve RAM buffer [mem 0xbff9a000-0xbfffffff]
[    1.162107] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.169164] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    1.174226] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    1.182913] Switched to clocksource hpet
[    1.198661] pnp: PnP ACPI init
[    1.201767] ACPI: bus type PNP registered
[    1.206298] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.206385] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.206467] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.206566] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.206602] pnp 00:04: [dma 2]
[    1.206650] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.206681] pnp: PnP ACPI: found 5 devices
[    1.210785] ACPI: bus type PNP unregistered
[    1.222823] pci 0000:02:00.0: can't claim BAR 6 [mem 0x69c00000-0x69c0ffff pref]: no compatible bridge window
[    1.232777] pci 0000:00:09.0: PCI bridge to [bus 01]
[    1.237754] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    1.243855] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    1.250654] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    1.257888] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
[    1.265113] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.270089] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    1.276881] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    1.281851] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    1.288645] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    1.293621] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.298595] pci_bus 0000:00: resource 4 [io  0x0d00-0x3fff]
[    1.298598] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[    1.298600] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
[    1.298603] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
[    1.298605] pci_bus 0000:00: resource 8 [io  0x0000-0x0cf7]
[    1.298608] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    1.298611] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[    1.298614] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[    1.298616] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
[    1.298619] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
[    1.298763] NET: Registered protocol family 2
[    1.303644] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.311316] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.318645] TCP: Hash tables configured (established 65536 bind 65536)
[    1.325255] TCP: reno registered
[    1.328516] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.334716] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.341515] NET: Registered protocol family 1
[    1.346266] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    1.352345] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.358263] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.363789] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.369304] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    1.374888] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.380436] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.385941] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    1.391520] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.397061] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.402566] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    1.408145] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.413680] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.419183] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    1.424763] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.430283] pci 0000:01:04.0: Video device with shadowed ROM
[    1.430292] PCI: CLS 64 bytes, default 64
[    1.430407] Unpacking initramfs...
[    1.813753] Freeing initrd memory: 14028K (ffff88007f24c000 - ffff88007ffff000)
[    1.821720] PCI-DMA: Disabling AGP.
[    1.825386] PCI-DMA: aperture base @ b4000000 size 65536 KB
[    1.830968] PCI-DMA: using GART IOMMU.
[    1.834737] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.846789] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.854958] microcode: CPU0: patch_level=0x01000084
[    1.859851] microcode: CPU1: patch_level=0x01000084
[    1.864747] microcode: CPU2: patch_level=0x01000084
[    1.869649] microcode: CPU3: patch_level=0x01000084
[    1.874552] microcode: CPU4: patch_level=0x01000084
[    1.879442] microcode: CPU5: patch_level=0x01000084
[    1.884337] microcode: CPU6: patch_level=0x01000084
[    1.889233] microcode: CPU7: patch_level=0x01000084
[    1.894227] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.903027] LVT offset 1 assigned for vector 0x400
[    1.907838] IBS: LVT offset 1 assigned
[    1.911628] perf: AMD IBS detected (0x00000007)
[    1.916789] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.923175] audit: initializing netlink subsys (disabled)
[    1.928598] audit: type=2000 audit(1477685541.648:1): initialized
[    1.935478] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.941888] zbud: loaded
[    1.944797] VFS: Disk quotas dquot_6.5.2
[    1.948769] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.955318] msgmni has been set to 9945
[    1.959698] alg: No test for stdrng (krng)
[    1.963856] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.971358] io scheduler noop registered
[    1.975296] io scheduler deadline registered
[    1.979642] io scheduler cfq registered (default)
[    1.984570] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[    1.984696] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[    1.984803] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[    1.984934] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[    1.985088] aer 0000:00:0b.0:pcie02: service driver aer loaded
[    1.985112] aer 0000:00:0c.0:pcie02: service driver aer loaded
[    1.985136] aer 0000:00:0d.0:pcie02: service driver aer loaded
[    1.985162] aer 0000:00:0e.0:pcie02: service driver aer loaded
[    1.985186] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    1.992157] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.998693] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    1.998703] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    2.005665] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    2.012199] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    2.012209] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[    2.019171] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[    2.019181] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[    2.026146] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[    2.026180] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.031791] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.038501] GHES: HEST is not enabled!
[    2.042390] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.068991] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.096657] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    2.104566] Linux agpgart interface v0.103
[    2.108893] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[    2.119452] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.124504] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.129782] mousedev: PS/2 mouse device common for all mice
[    2.135456] rtc_cmos rtc_cmos: RTC can wake from S4
[    2.140595] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    2.146993] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    2.154859] ledtrig-cpu: registered to indicate activity on CPUs
[    2.161050] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.167497] AMD IOMMUv2 functionality not available on this system
[    2.173824] TCP: cubic registered
[    2.177300] NET: Registered protocol family 10
[    2.182190] mip6: Mobile IPv6
[    2.185174] NET: Registered protocol family 17
[    2.189705] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.198361] mpls_gso: MPLS GSO support
[    2.202993] registered taskstats version 1
[    2.207869] rtc_cmos rtc_cmos: setting system clock to 2016-10-28 20:12:23 UTC (1477685543)
[    2.216292] PM: Hibernation image not present or could not be loaded.
[    2.218085] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[    2.225944] Write protecting the kernel read-only data: 8192k
[    2.235170] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
[    2.243756] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    2.276858] systemd-udevd[99]: starting version 215
[    2.282600] random: systemd-udevd urandom read with 4 bits of entropy available
[    2.311754] SCSI subsystem initialized
[    2.316323] ACPI: bus type USB registered
[    2.320476] usbcore: registered new interface driver usbfs
[    2.326156] usbcore: registered new interface driver hub
[    2.326240] pps_core: LinuxPPS API ver. 1 registered
[    2.326241] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.343442] FDC 0 is a post-1991 82077
[    2.349615] usbcore: registered new device driver usb
[    2.355029] PTP clock support registered
[    2.359532] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.359767] libata version 3.00 loaded.
[    2.366914] ehci-pci: EHCI PCI platform driver
[    2.371652] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.371771] ehci-pci 0000:00:02.1: EHCI Host Controller
[    2.371789] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    2.371811] ehci-pci 0000:00:02.1: debug port 1
[    2.371857] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    2.371889] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
[    2.382522] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.382595] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.382597] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.382598] usb usb1: Product: EHCI Host Controller
[    2.382600] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.382601] usb usb1: SerialNumber: 0000:00:02.1
[    2.382895] hub 1-0:1.0: USB hub found
[    2.382905] hub 1-0:1.0: 10 ports detected
[    2.444212] sata_nv 0000:00:07.0: version 3.5
[    2.444597] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[    2.450680] ohci-pci: OHCI PCI platform driver
[    2.451231] scsi0 : sata_nv
[    2.458334] tg3.c:v3.137 (May 11, 2014)
[    2.458371] scsi1 : sata_nv
[    2.458458] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[    2.458471] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[    2.458723] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[    2.459190] scsi2 : sata_nv
[    2.459349] scsi3 : sata_nv
[    2.459409] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[    2.459411] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[    2.459459] pata_amd 0000:00:06.0: version 0.4.1
[    2.460129] scsi4 : pata_amd
[    2.460326] scsi5 : pata_amd
[    2.460393] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[    2.460394] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[    2.524559] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[    2.530392] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    2.530636] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[    2.541736] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.549199] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
[    2.593693] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[    2.603960] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.613702] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.621531] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.630338] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[    2.636139] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[    2.641948] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.648754] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.655983] usb usb2: Product: OHCI PCI host controller
[    2.661209] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.667302] usb usb2: SerialNumber: 0000:00:02.0
[    2.672124] hub 2-0:1.0: USB hub found
[    2.675897] hub 2-0:1.0: 10 ports detected
[    2.694867] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[    2.705129] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.714865] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.722696] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.770395] ata1: SATA link down (SStatus 0 SControl 300)
[    2.770403] ata3: SATA link down (SStatus 0 SControl 300)
[    2.846357] tsc: Refined TSC clocksource calibration: 1909.786 MHz
[    3.090285] ata2: SATA link down (SStatus 0 SControl 300)
[    3.406156] ata4: SATA link down (SStatus 0 SControl 300)
[    3.596120] FS-Cache: Loaded
[    3.604025] RPC: Registered named UNIX socket transport module.
[    3.611060] RPC: Registered udp transport module.
[    3.617136] RPC: Registered tcp transport module.
[    3.623228] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.638545] FS-Cache: Netfs 'nfs' registered for caching
[    3.651527] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[    3.698146] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    3.850117] Switched to clocksource tsc
[    6.928897] tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
[    6.935515] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[    6.942399] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    7.838528] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    7.852249] systemd[1]: Detected architecture 'x86-64'.
[    7.897102] systemd[1]: Inserted module 'autofs4'
[    7.903303] systemd[1]: Set hostname to <cb-test-tgt>.
[    8.062941] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[    8.075672] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    8.091080] systemd[1]: Expecting device dev-ttyS0.device...
[    8.104677] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    8.112455] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.120058] systemd[1]: Starting Remote File Systems (Pre).
[    8.136660] systemd[1]: Reached target Remote File Systems (Pre).
[    8.142846] systemd[1]: Starting Encrypted Volumes.
[    8.156560] systemd[1]: Reached target Encrypted Volumes.
[    8.162025] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    8.184563] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.193998] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    8.202063] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    8.209992] systemd[1]: Starting Paths.
[    8.224534] systemd[1]: Reached target Paths.
[    8.228933] systemd[1]: Starting Swap.
[    8.240520] systemd[1]: Reached target Swap.
[    8.244810] systemd[1]: Starting Root Slice.
[    8.256532] systemd[1]: Created slice Root Slice.
[    8.261258] systemd[1]: Starting User and Session Slice.
[    8.276519] systemd[1]: Created slice User and Session Slice.
[    8.282285] systemd[1]: Starting Delayed Shutdown Socket.
[    8.296508] systemd[1]: Listening on Delayed Shutdown Socket.
[    8.302286] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    8.320499] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    8.327482] systemd[1]: Starting Journal Socket (/dev/log).
[    8.344493] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.350449] systemd[1]: Starting udev Kernel Socket.
[    8.364493] systemd[1]: Listening on udev Kernel Socket.
[    8.369847] systemd[1]: Starting udev Control Socket.
[    8.384483] systemd[1]: Listening on udev Control Socket.
[    8.389916] systemd[1]: Starting Journal Socket.
[    8.404476] systemd[1]: Listening on Journal Socket.
[    8.409500] systemd[1]: Starting System Slice.
[    8.424467] systemd[1]: Created slice System Slice.
[    8.429376] systemd[1]: Starting system-getty.slice.
[    8.444455] systemd[1]: Created slice system-getty.slice.
[    8.449874] systemd[1]: Starting system-serial\x2dgetty.slice.
[    8.464460] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    8.470783] systemd[1]: Starting Increase datagram queue length...
[    8.489652] systemd[1]: Starting udev Coldplug all Devices...
[    8.527465] systemd[1]: Starting Load Kernel Modules...
[    8.543857] systemd[1]: Started Set Up Additional Binary Formats.
[    8.550221] systemd[1]: Mounting Debug File System...
[    8.565970] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    8.589601] systemd[1]: Mounting POSIX Message Queue File System...
[    8.605587] systemd[1]: Mounting Huge Pages File System...
[    8.621465] systemd[1]: Starting Slices.
[    8.636480] systemd[1]: Reached target Slices.
[    8.641024] systemd[1]: Starting Remount Root and Kernel File Systems...
[    8.672456] systemd[1]: Mounted Huge Pages File System.
[    8.688391] systemd[1]: Mounted POSIX Message Queue File System.
[    8.704390] systemd[1]: Mounted Debug File System.
[    8.720444] systemd[1]: Started Increase datagram queue length.
[    8.736367] systemd[1]: Started Load Kernel Modules.
[    8.756365] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    8.780409] systemd[1]: Started Remount Root and Kernel File Systems.
[    8.796353] systemd[1]: Started udev Coldplug all Devices.
[    8.842891] systemd[1]: Started Various fixups to make systemd work better on Debian.
[    8.850796] systemd[1]: Starting Load/Save Random Seed...
[    8.866194] systemd[1]: Starting Create Static Device Nodes in /dev...
[    8.885886] systemd[1]: Starting Apply Kernel Variables...
[    8.902040] systemd[1]: Mounted Configuration File System.
[    8.907640] systemd[1]: Mounted FUSE Control File System.
[    8.913061] systemd[1]: Starting Syslog Socket.
[    8.928376] systemd[1]: Listening on Syslog Socket.
[    8.933348] systemd[1]: Starting Sockets.
[    8.948294] systemd[1]: Reached target Sockets.
[    8.952859] systemd[1]: Starting Journal Service...
[    8.980372] systemd[1]: Started Journal Service.
[    9.056926] systemd-udevd[211]: starting version 215
[    9.151114] systemd-journald[210]: Received request to flush runtime journal from PID 1
[    9.188468] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[    9.196462] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[    9.206841] EDAC MC: Ver: 3.0.0
[    9.211260] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    9.211380] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.226375] ACPI: Power Button [PWRB]
[    9.230836] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    9.230907] acpi-cpufreq: overriding BIOS provided _PSD data
[    9.244949] ACPI: Power Button [PWRF]
[    9.249756] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    9.258354] MCE: In-kernel MCE decoding enabled.
[    9.267750] kvm: Nested Virtualization enabled
[    9.268423] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[    9.268509] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[    9.284623] kvm: Nested Paging enabled
[    9.288647] AMD64 EDAC driver v3.4.0
[    9.292750] EDAC amd64: DRAM ECC enabled.
[    9.297945] EDAC amd64: F10h detected (node 0).
[    9.302549] EDAC MC: DCT0 chip selects:
[    9.302552] EDAC amd64: MC: 0:     0MB 1:     0MB
[    9.307274] EDAC amd64: MC: 2:     0MB 3:     0MB
[    9.311908] EDAC amd64: MC: 4:     0MB 5:     0MB
[    9.316628] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[    9.321343] EDAC MC: DCT1 chip selects:
[    9.321344] EDAC amd64: MC: 0:     0MB 1:     0MB
[    9.326077] EDAC amd64: MC: 2:     0MB 3:     0MB
[    9.330797] EDAC amd64: MC: 4:     0MB 5:     0MB
[    9.335519] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[    9.340317] EDAC amd64: using x4 syndromes.
[    9.344508] EDAC amd64: MCT channel count: 2
[    9.350152] EDAC amd64: CS6: Registered DDR2 RAM
[    9.354894] EDAC amd64: CS7: Registered DDR2 RAM
[    9.361177] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[    9.372410] EDAC amd64: DRAM ECC enabled.
[    9.376501] EDAC amd64: F10h detected (node 1).
[    9.381085] EDAC MC: DCT0 chip selects:
[    9.381089] EDAC amd64: MC: 0:  1024MB 1:     0MB
[    9.385812] EDAC amd64: MC: 2:     0MB 3:     0MB
[    9.390518] EDAC amd64: MC: 4:     0MB 5:     0MB
[    9.395223] EDAC amd64: MC: 6:     0MB 7:     0MB
[    9.399943] EDAC MC: DCT1 chip selects:
[    9.399944] EDAC amd64: MC: 0:     0MB 1:     0MB
[    9.399946] EDAC amd64: MC: 2:     0MB 3:     0MB
[    9.399948] EDAC amd64: MC: 4:     0MB 5:     0MB
[    9.399950] EDAC amd64: MC: 6:     0MB 7:     0MB
[    9.399958] EDAC amd64: using x4 syndromes.
[    9.399962] EDAC amd64: MCT channel count: 1
[    9.400009] EDAC amd64: CS0: Registered DDR2 RAM
[    9.400274] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
[    9.400432] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[    9.536811] random: nonblocking pool is initialized
[   39.691278] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****