[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13)
[    0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64 
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff99fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bff9a000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 06/05/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000F8000000 mask FFFFFC000000 write-combining
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000180000000 aka 6144M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xbff9a max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f0820-0x000f082f] mapped at [ffff8800000f0820]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
[    0.000000]  [mem 0x17fe00000-0x17fffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
[    0.000000]  [mem 0x17c000000-0x17fdfffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
[    0.000000]  [mem 0x100000000-0x17bffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbff99fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0xbfdfffff] page 2M
[    0.000000]  [mem 0xbfe00000-0xbff99fff] page 4k
[    0.000000] RAMDISK: [mem 0x7f24c000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F09F0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000BFFAB0E0 00006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000BFFAD8D0 000074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000BFFAB280 002644 (v02 ASUS   COREBOOT 00000001 INTL 20150619)
[    0.000000] ACPI: FACS 0x00000000BFFAB240 000040
[    0.000000] ACPI: SSDT 0x00000000BFFAD9D0 000EA6 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: TCPA 0x00000000BFFAE880 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x00000000BFFAE8C0 0000C6 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000BFFAE990 000150 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000BFFAEAE0 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000BFFAEB10 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000BFFAEB50 000150 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000BFFAECA0 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
[    0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=2
[    0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
[    0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[    0.000000]   NODE_DATA [mem 0x13fffb000-0x13fffffff]
[    0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
[    0.000000]   NODE_DATA [mem 0x17fff8000-0x17fffcfff]
[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
[    0.000000]  [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x17fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xbff99fff]
[    0.000000]   node   0: [mem 0x100000000-0x13fffffff]
[    0.000000]   node   1: [mem 0x140000000-0x17fffffff]
[    0.000000] On node 0 totalpages: 1048376
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10695 pages used for memmap
[    0.000000]   DMA32 zone: 782234 pages, LIFO batch:31
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] On node 1 totalpages: 262144
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbff9a000-0xcfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
[    0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 
[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1292580
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64 
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xf5ea000000-0xf5ebffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[    0.000000] Memory: 5012208K/5242080K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 229872K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1909.859 MHz processor
[    0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.71 BogoMIPS (lpj=7639436)
[    0.010796] pid_max: default: 32768 minimum: 301
[    0.015441] ACPI: Core revision 20140424
[    0.021814] ACPI: All ACPI Tables successfully acquired
[    0.027170] Security Framework initialized
[    0.031296] AppArmor: AppArmor disabled by boot time parameter
[    0.037141] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.044864] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.058039] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.067779] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.074678] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.082528] Initializing cgroup subsys memory
[    0.086917] Initializing cgroup subsys devices
[    0.091385] Initializing cgroup subsys freezer
[    0.095841] Initializing cgroup subsys net_cls
[    0.100306] Initializing cgroup subsys blkio
[    0.104603] Initializing cgroup subsys perf_event
[    0.109320] Initializing cgroup subsys net_prio
[    0.113899] tseg: 0000000000
[    0.113910] CPU: Physical Processor ID: 0
[    0.117931] CPU: Processor Core ID: 0
[    0.121603] mce: CPU supports 6 MCE banks
[    0.125639] LVT offset 0 assigned for vector 0xf9
[    0.130360] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.145706] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
[    0.154720] ftrace: allocating 21614 entries in 85 pages
[    0.170037] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.215554] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
[    0.332512] Performance Events: AMD PMU driver.
[    0.337081] ... version:                0
[    0.341093] ... bit width:              48
[    0.345191] ... generic registers:      4
[    0.349203] ... value mask:             0000ffffffffffff
[    0.354503] ... max period:             00007fffffffffff
[    0.359823] ... fixed-purpose events:   0
[    0.363851] ... event mask:             000000000000000f
[    0.371717] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.379918] x86: Booting SMP configuration:
[    0.384109] .... node  #0, CPUs:      #1 #2 #3
[    0.428469] .... node  #1, CPUs:   #4 #5 #6 #7
[    0.581257] x86: Booted up 2 nodes, 8 CPUs
[    0.585557] smpboot: Total of 8 processors activated (30558.12 BogoMIPS)
[    0.598062] devtmpfs: initialized
[    0.609370] pinctrl core: initialized pinctrl subsystem
[    0.614761] NET: Registered protocol family 16
[    0.619423] cpuidle: using governor ladder
[    0.623532] cpuidle: using governor menu
[    0.627470] node 0 link 1: io port [1000, 3fff]
[    0.627474] TOM: 00000000c0000000 aka 3072M
[    0.631666] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
[    0.631670] node 0 link 1: mmio [fc000000, fc3fffff]
[    0.631673] node 0 link 1: mmio [f8000000, fbffffff]
[    0.631675] TOM2: 0000000180000000 aka 6144M
[    0.635955] bus: [bus 00-05] on node 0 link 1
[    0.635957] bus: 00 [io  0x0000-0xffff]
[    0.635959] bus: 00 [mem 0xd0000000-0xffffffff]
[    0.635961] bus: 00 [mem 0x180000000-0xfcffffffff]
[    0.636069] ACPI: bus type PCI registered
[    0.640088] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.646697] PCI: Using configuration type 1 for base access
[    0.652268] PCI: Using configuration type 1 for extended access
[    0.669361] ACPI: Added _OSI(Module Device)
[    0.673558] ACPI: Added _OSI(Processor Device)
[    0.678008] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.682721] ACPI: Added _OSI(Processor Aggregator Device)
[    0.691715] ACPI: Interpreter enabled
[    0.695400] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.704666] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[    0.713936] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[    0.723207] ACPI: (supports S0 S1 S5)
[    0.726879] ACPI: Using IOAPIC for interrupt routing
[    0.731889] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.760646] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[    0.766835] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.775044] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.814418] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.824472] PCI host bridge to bus 0000:00
[    0.828576] pci_bus 0000:00: root bus resource [bus 00-05]
[    0.834066] pci_bus 0000:00: root bus resource [io  0x0d00-0x3fff]
[    0.840252] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.847132] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[    0.854009] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
[    0.860876] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.867069] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.867278] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[    0.867286] pci 0000:00:01.0: reg 0x10: [io  0x2c00-0x2c7f]
[    0.867424] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.867432] pci 0000:00:01.1: reg 0x10: [io  0x3000-0x301f]
[    0.867453] pci 0000:00:01.1: reg 0x20: [io  0x2c80-0x2cbf]
[    0.867458] pci 0000:00:01.1: reg 0x24: [io  0x2cc0-0x2cff]
[    0.867478] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.867577] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.867587] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
[    0.867627] pci 0000:00:02.0: supports D1 D2
[    0.867629] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.867675] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.873401] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.873416] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
[    0.873458] pci 0000:00:02.1: supports D1 D2
[    0.873460] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.873505] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.879234] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.879269] pci 0000:00:06.0: reg 0x20: [io  0x3020-0x302f]
[    0.879290] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.886421] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.892954] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.900091] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.906729] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.906737] pci 0000:00:07.0: reg 0x10: [io  0x3050-0x3057]
[    0.906745] pci 0000:00:07.0: reg 0x14: [io  0x3070-0x3073]
[    0.906750] pci 0000:00:07.0: reg 0x18: [io  0x3058-0x305f]
[    0.906755] pci 0000:00:07.0: reg 0x1c: [io  0x3074-0x3077]
[    0.906759] pci 0000:00:07.0: reg 0x20: [io  0x3030-0x303f]
[    0.906764] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
[    0.906871] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.906885] pci 0000:00:08.0: reg 0x10: [io  0x3060-0x3067]
[    0.906890] pci 0000:00:08.0: reg 0x14: [io  0x3078-0x307b]
[    0.906895] pci 0000:00:08.0: reg 0x18: [io  0x3068-0x306f]
[    0.906899] pci 0000:00:08.0: reg 0x1c: [io  0x307c-0x307f]
[    0.906904] pci 0000:00:08.0: reg 0x20: [io  0x3040-0x304f]
[    0.906909] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
[    0.907042] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[    0.907119] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.912841] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.912893] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.912940] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.918654] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.918734] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.918780] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.924500] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.924539] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.924598] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.930316] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.930355] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.930412] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.936150] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.936308] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.936424] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.936545] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.936679] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.936781] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[    0.936899] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[    0.937024] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[    0.937151] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[    0.937252] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[    0.937435] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[    0.937460] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.937471] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
[    0.937481] pci 0000:01:04.0: reg 0x18: [io  0x1000-0x107f]
[    0.937525] pci 0000:01:04.0: supports D1 D2
[    0.937629] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.942599] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    0.942602] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.942605] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    0.942711] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[    0.942773] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
[    0.942817] pci 0000:02:00.0: reg 0x30: [mem 0x69c00000-0x69c0ffff pref]
[    0.942895] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.942995] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.953000] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.957967] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.958065] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[    0.958106] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
[    0.958214] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.958297] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.968299] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.973268] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    0.973344] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.978392] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    0.983376] pci_bus 0000:00: on NUMA node 0
[    0.983474] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    0.989628] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    0.995767] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    1.003073] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    1.010374] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    1.017669] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[    1.024968] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    1.031089] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[    1.037218] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[    1.044507] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    1.051801] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    1.059088] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[    1.065216] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[    1.071350] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[    1.078654] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[    1.085955] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[    1.093247] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.101766] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[    1.108229] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[    1.114699] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[    1.121155] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[    1.127874] ACPI: Enabled 1 GPEs in block 00 to 1F
[    1.132990] vgaarb: setting as boot device: PCI:0000:01:04.0
[    1.138654] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[    1.146743] vgaarb: loaded
[    1.149458] vgaarb: bridge control possible 0000:01:04.0
[    1.154944] PCI: Using ACPI for IRQ routing
[    1.159139] PCI: pci_cache_line_size set to 64 bytes
[    1.159196] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.159200] e820: reserve RAM buffer [mem 0xbff9a000-0xbfffffff]
[    1.159506] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.166555] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    1.171619] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    1.180302] Switched to clocksource hpet
[    1.195833] pnp: PnP ACPI init
[    1.198943] ACPI: bus type PNP registered
[    1.203468] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.203553] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.203634] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.203730] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.203768] pnp 00:04: [dma 2]
[    1.203815] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.203836] pnp: PnP ACPI: found 5 devices
[    1.207950] ACPI: bus type PNP unregistered
[    1.219998] pci 0000:02:00.0: can't claim BAR 6 [mem 0x69c00000-0x69c0ffff pref]: no compatible bridge window
[    1.229952] pci 0000:00:09.0: PCI bridge to [bus 01]
[    1.234931] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    1.241035] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    1.247829] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    1.255066] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
[    1.262290] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.267265] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    1.274058] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    1.279028] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    1.285822] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    1.290801] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.295780] pci_bus 0000:00: resource 4 [io  0x0d00-0x3fff]
[    1.295782] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[    1.295785] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
[    1.295787] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
[    1.295790] pci_bus 0000:00: resource 8 [io  0x0000-0x0cf7]
[    1.295793] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    1.295796] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[    1.295799] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[    1.295801] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
[    1.295804] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
[    1.295942] NET: Registered protocol family 2
[    1.300844] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.308535] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.315867] TCP: Hash tables configured (established 65536 bind 65536)
[    1.322471] TCP: reno registered
[    1.325733] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.331943] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.338730] NET: Registered protocol family 1
[    1.343478] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    1.349557] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.355473] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.361002] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.366516] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    1.372099] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.377647] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.383160] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    1.388739] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.394280] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.399797] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    1.405383] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.410924] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.416441] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    1.422024] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.427547] pci 0000:01:04.0: Video device with shadowed ROM
[    1.427557] PCI: CLS 64 bytes, default 64
[    1.427666] Unpacking initramfs...
[    1.811282] Freeing initrd memory: 14028K (ffff88007f24c000 - ffff88007ffff000)
[    1.819224] PCI-DMA: Disabling AGP.
[    1.824332] PCI-DMA: aperture base @ b4000000 size 65536 KB
[    1.829918] PCI-DMA: using GART IOMMU.
[    1.833676] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.846003] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.854170] microcode: CPU0: patch_level=0x01000084
[    1.859064] microcode: CPU1: patch_level=0x01000084
[    1.863967] microcode: CPU2: patch_level=0x01000084
[    1.868869] microcode: CPU3: patch_level=0x01000084
[    1.873771] microcode: CPU4: patch_level=0x01000084
[    1.878664] microcode: CPU5: patch_level=0x01000084
[    1.883556] microcode: CPU6: patch_level=0x01000084
[    1.888452] microcode: CPU7: patch_level=0x01000084
[    1.893440] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.902239] LVT offset 1 assigned for vector 0x400
[    1.907054] IBS: LVT offset 1 assigned
[    1.910848] perf: AMD IBS detected (0x00000007)
[    1.915996] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.922384] audit: initializing netlink subsys (disabled)
[    1.927810] audit: type=2000 audit(1465160868.668:1): initialized
[    1.934681] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.941091] zbud: loaded
[    1.943997] VFS: Disk quotas dquot_6.5.2
[    1.947968] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.954508] msgmni has been set to 9945
[    1.958906] alg: No test for stdrng (krng)
[    1.963065] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.970572] io scheduler noop registered
[    1.974509] io scheduler deadline registered
[    1.978864] io scheduler cfq registered (default)
[    1.983791] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[    1.983918] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[    1.984038] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[    1.984169] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[    1.984320] aer 0000:00:0b.0:pcie02: service driver aer loaded
[    1.984345] aer 0000:00:0c.0:pcie02: service driver aer loaded
[    1.984369] aer 0000:00:0d.0:pcie02: service driver aer loaded
[    1.984390] aer 0000:00:0e.0:pcie02: service driver aer loaded
[    1.984413] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    1.991383] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.997913] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    1.997922] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    2.004886] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    2.011419] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    2.011429] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[    2.018392] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[    2.018402] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[    2.025369] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[    2.025401] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.031013] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.037727] GHES: HEST is not enabled!
[    2.041624] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.068226] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.095924] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    2.103850] Linux agpgart interface v0.103
[    2.108171] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[    2.118541] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.123601] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.128903] mousedev: PS/2 mouse device common for all mice
[    2.134584] rtc_cmos rtc_cmos: RTC can wake from S4
[    2.139714] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    2.146117] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    2.153976] ledtrig-cpu: registered to indicate activity on CPUs
[    2.160166] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.166612] AMD IOMMUv2 functionality not available on this system
[    2.172939] TCP: cubic registered
[    2.176415] NET: Registered protocol family 10
[    2.181324] mip6: Mobile IPv6
[    2.184314] NET: Registered protocol family 17
[    2.184791] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.197380] mpls_gso: MPLS GSO support
[    2.202001] registered taskstats version 1
[    2.206869] rtc_cmos rtc_cmos: setting system clock to 2016-06-05 21:07:50 UTC (1465160870)
[    2.215291] PM: Hibernation image not present or could not be loaded.
[    2.217111] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[    2.224947] Write protecting the kernel read-only data: 8192k
[    2.234179] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
[    2.242762] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    2.276826] systemd-udevd[98]: starting version 215
[    2.282594] random: systemd-udevd urandom read with 3 bits of entropy available
[    2.313393] SCSI subsystem initialized
[    2.313556] ACPI: bus type USB registered
[    2.313610] usbcore: registered new interface driver usbfs
[    2.313627] usbcore: registered new interface driver hub
[    2.313768] usbcore: registered new device driver usb
[    2.338885] pps_core: LinuxPPS API ver. 1 registered
[    2.338889] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.341116] FDC 0 is a post-1991 82077
[    2.354222] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.364150] ehci-pci: EHCI PCI platform driver
[    2.368900] PTP clock support registered
[    2.368970] ehci-pci 0000:00:02.1: EHCI Host Controller
[    2.368989] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    2.369010] ehci-pci 0000:00:02.1: debug port 1
[    2.369085] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    2.369124] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
[    2.379912] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.380001] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.380004] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.380005] usb usb1: Product: EHCI Host Controller
[    2.380006] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.380008] usb usb1: SerialNumber: 0000:00:02.1
[    2.380401] hub 1-0:1.0: USB hub found
[    2.380493] hub 1-0:1.0: 10 ports detected
[    2.439285] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.446102] libata version 3.00 loaded.
[    2.446781] ohci-pci: OHCI PCI platform driver
[    2.451948] tg3.c:v3.137 (May 11, 2014)
[    2.455803] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[    2.461663] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[    2.467724] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    2.473323] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.480783] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
[    2.522938] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[    2.533199] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.542935] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.550767] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.559598] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.566389] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.573613] usb usb2: Product: OHCI PCI host controller
[    2.578845] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.584945] usb usb2: SerialNumber: 0000:00:02.0
[    2.589599] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[    2.595390] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[    2.601423] hub 2-0:1.0: USB hub found
[    2.605190] hub 2-0:1.0: 10 ports detected
[    2.609666] pata_amd 0000:00:06.0: version 0.4.1
[    2.610402] scsi0 : pata_amd
[    2.613514] scsi1 : pata_amd
[    2.616471] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[    2.623439] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[    2.630729] sata_nv 0000:00:07.0: version 3.5
[    2.631004] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[    2.637473] scsi2 : sata_nv
[    2.640473] scsi3 : sata_nv
[    2.643339] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[    2.643968] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[    2.643971] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.643973] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.643975] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.685016] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[    2.692388] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[    2.698623] scsi4 : sata_nv
[    2.701623] scsi5 : sata_nv
[    2.704546] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[    2.711690] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[    2.843745] tsc: Refined TSC clocksource calibration: 1909.787 MHz
[    3.003707] ata3: SATA link down (SStatus 0 SControl 300)
[    3.027693] ata5: SATA link down (SStatus 0 SControl 300)
[    3.319578] ata4: SATA link down (SStatus 0 SControl 300)
[    3.635462] ata6: SATA link down (SStatus 0 SControl 300)
[    3.661059] FS-Cache: Loaded
[    3.669021] RPC: Registered named UNIX socket transport module.
[    3.676069] RPC: Registered udp transport module.
[    3.682147] RPC: Registered tcp transport module.
[    3.688239] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.701709] FS-Cache: Netfs 'nfs' registered for caching
[    3.719076] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[    3.763500] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    3.847490] Switched to clocksource tsc
[    6.520996] tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
[    6.527612] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[    6.534495] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    6.908142] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    6.921873] systemd[1]: Detected architecture 'x86-64'.
[    6.967644] systemd[1]: Inserted module 'autofs4'
[    6.974225] systemd[1]: Set hostname to <cb-test-tgt>.
[    7.132183] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[    7.144919] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    7.160321] systemd[1]: Expecting device dev-ttyS0.device...
[    7.174311] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    7.182034] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.189623] systemd[1]: Starting Remote File Systems (Pre).
[    7.206353] systemd[1]: Reached target Remote File Systems (Pre).
[    7.212529] systemd[1]: Starting Encrypted Volumes.
[    7.226262] systemd[1]: Reached target Encrypted Volumes.
[    7.231727] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    7.254263] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.263695] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    7.271754] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    7.279691] systemd[1]: Starting Paths.
[    7.294247] systemd[1]: Reached target Paths.
[    7.298643] systemd[1]: Starting Swap.
[    7.310247] systemd[1]: Reached target Swap.
[    7.314544] systemd[1]: Starting Root Slice.
[    7.326243] systemd[1]: Created slice Root Slice.
[    7.330973] systemd[1]: Starting User and Session Slice.
[    7.346221] systemd[1]: Created slice User and Session Slice.
[    7.351993] systemd[1]: Starting Delayed Shutdown Socket.
[    7.366221] systemd[1]: Listening on Delayed Shutdown Socket.
[    7.372000] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    7.390220] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.397205] systemd[1]: Starting Journal Socket (/dev/log).
[    7.414292] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.420304] systemd[1]: Starting udev Kernel Socket.
[    7.434216] systemd[1]: Listening on udev Kernel Socket.
[    7.439567] systemd[1]: Starting udev Control Socket.
[    7.454195] systemd[1]: Listening on udev Control Socket.
[    7.459629] systemd[1]: Starting Journal Socket.
[    7.474199] systemd[1]: Listening on Journal Socket.
[    7.479221] systemd[1]: Starting System Slice.
[    7.494174] systemd[1]: Created slice System Slice.
[    7.499080] systemd[1]: Starting system-getty.slice.
[    7.514184] systemd[1]: Created slice system-getty.slice.
[    7.519607] systemd[1]: Starting system-serial\x2dgetty.slice.
[    7.534168] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    7.540482] systemd[1]: Starting Increase datagram queue length...
[    7.559654] systemd[1]: Starting udev Coldplug all Devices...
[    7.588439] systemd[1]: Starting Load Kernel Modules...
[    7.605864] systemd[1]: Started Set Up Additional Binary Formats.
[    7.612117] systemd[1]: Mounting Debug File System...
[    7.627520] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.651345] systemd[1]: Mounting POSIX Message Queue File System...
[    7.667350] systemd[1]: Mounting Huge Pages File System...
[    7.683491] systemd[1]: Starting Slices.
[    7.698188] systemd[1]: Reached target Slices.
[    7.702734] systemd[1]: Starting Remount Root and Kernel File Systems...
[    7.730172] systemd[1]: Mounted Huge Pages File System.
[    7.746167] systemd[1]: Mounted POSIX Message Queue File System.
[    7.762107] systemd[1]: Mounted Debug File System.
[    7.778126] systemd[1]: Started Increase datagram queue length.
[    7.794153] systemd[1]: Started Load Kernel Modules.
[    7.814125] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    7.838118] systemd[1]: Started Remount Root and Kernel File Systems.
[    7.854072] systemd[1]: Started udev Coldplug all Devices.
[    7.899726] systemd[1]: Started Various fixups to make systemd work better on Debian.
[    7.907602] systemd[1]: Starting Load/Save Random Seed...
[    7.923809] systemd[1]: Starting Create Static Device Nodes in /dev...
[    7.943680] systemd[1]: Starting Apply Kernel Variables...
[    7.959698] systemd[1]: Mounted Configuration File System.
[    7.965307] systemd[1]: Mounted FUSE Control File System.
[    7.970732] systemd[1]: Starting Syslog Socket.
[    7.986088] systemd[1]: Listening on Syslog Socket.
[    7.991062] systemd[1]: Starting Sockets.
[    8.006014] systemd[1]: Reached target Sockets.
[    8.010581] systemd[1]: Starting Journal Service...
[    8.038078] systemd[1]: Started Journal Service.
[    8.114160] systemd-udevd[211]: starting version 215
[    8.242480] systemd-journald[210]: Received request to flush runtime journal from PID 1
[    8.254198] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[    8.262879] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[    8.263130] EDAC MC: Ver: 3.0.0
[    8.275574] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    8.284572] ACPI: Power Button [PWRB]
[    8.288493] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    8.297274] ACPI: Power Button [PWRF]
[    8.302643] MCE: In-kernel MCE decoding enabled.
[    8.309625] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.318117] acpi-cpufreq: overriding BIOS provided _PSD data
[    8.319280] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    8.331883] AMD64 EDAC driver v3.4.0
[    8.335770] EDAC amd64: DRAM ECC enabled.
[    8.340372] EDAC amd64: F10h detected (node 0).
[    8.345009] EDAC MC: DCT0 chip selects:
[    8.345012] EDAC amd64: MC: 0:     0MB 1:     0MB
[    8.349735] EDAC amd64: MC: 2:     0MB 3:     0MB
[    8.354460] EDAC amd64: MC: 4:     0MB 5:     0MB
[    8.359191] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[    8.363921] EDAC MC: DCT1 chip selects:
[    8.363923] EDAC amd64: MC: 0:     0MB 1:     0MB
[    8.368650] EDAC amd64: MC: 2:     0MB 3:     0MB
[    8.373293] EDAC amd64: MC: 4:     0MB 5:     0MB
[    8.378018] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[    8.382798] EDAC amd64: using x4 syndromes.
[    8.387027] EDAC amd64: MCT channel count: 2
[    8.391419] EDAC amd64: CS6: Registered DDR2 RAM
[    8.397379] EDAC amd64: CS7: Registered DDR2 RAM
[    8.403801] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[    8.414256] EDAC amd64: DRAM ECC enabled.
[    8.418464] EDAC amd64: F10h detected (node 1).
[    8.423049] EDAC MC: DCT0 chip selects:
[    8.423052] EDAC amd64: MC: 0:  1024MB 1:     0MB
[    8.427766] EDAC amd64: MC: 2:     0MB 3:     0MB
[    8.432485] EDAC amd64: MC: 4:     0MB 5:     0MB
[    8.432643] kvm: Nested Virtualization enabled
[    8.432647] kvm: Nested Paging enabled
[    8.445390] EDAC amd64: MC: 6:     0MB 7:     0MB
[    8.450022] EDAC MC: DCT1 chip selects:
[    8.450024] EDAC amd64: MC: 0:     0MB 1:     0MB
[    8.454777] EDAC amd64: MC: 2:     0MB 3:     0MB
[    8.459532] EDAC amd64: MC: 4:     0MB 5:     0MB
[    8.464249] EDAC amd64: MC: 6:     0MB 7:     0MB
[    8.468961] EDAC amd64: using x4 syndromes.
[    8.474541] EDAC amd64: MCT channel count: 1
[    8.480552] EDAC amd64: CS0: Registered DDR2 RAM
[    8.486387] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
[    8.497332] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[    8.497502] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[    8.497555] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[    8.607917] random: nonblocking pool is initialized
[   38.765522] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****