[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
[    0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt 
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.2-301-g48bfcdf-dirty 11/19/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000F8000000 mask FFFFFC000000 write-combining
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000180000000 aka 6144M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
[    0.000000]  [mem 0x17fe00000-0x17fffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
[    0.000000]  [mem 0x17c000000-0x17fdfffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
[    0.000000]  [mem 0x100000000-0x17bffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0xbfdfffff] page 2M
[    0.000000]  [mem 0xbfe00000-0xbff9afff] page 4k
[    0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000BFFB68D0 000074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000BFFB4280 002644 (v02 ASUS   COREBOOT 00000001 INTL 20150204)
[    0.000000] ACPI: FACS 0x00000000BFFB4240 000040
[    0.000000] ACPI: SSDT 0x00000000BFFB69D0 000EA6 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: TCPA 0x00000000BFFB7880 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x00000000BFFB78C0 0000C6 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000BFFB7990 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000BFFB7B08 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000BFFB7B40 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000BFFB7B80 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000BFFB7CF8 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xbfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
[    0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=3
[    0.000000] NUMA: node 2 [mem 0x00100000-0xbfffffff] overlaps with node 0 [mem 0x00100000-0xbfffffff]
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of physical nodes 2
[    0.000000] Node 0 MemBase 0000000000000000 Limit 0000000140000000
[    0.000000] Node 1 MemBase 0000000140000000 Limit 0000000180000000
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[    0.000000]   NODE_DATA [mem 0x13fffb000-0x13fffffff]
[    0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
[    0.000000]   NODE_DATA [mem 0x17fff9000-0x17fffdfff]
[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
[    0.000000]  [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x17fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xbff9afff]
[    0.000000]   node   0: [mem 0x100000000-0x13fffffff]
[    0.000000]   node   1: [mem 0x140000000-0x17fffffff]
[    0.000000] On node 0 totalpages: 1048377
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10695 pages used for memmap
[    0.000000]   DMA32 zone: 782235 pages, LIFO batch:31
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] On node 1 totalpages: 262144
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
[    0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 
[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1292581
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt 
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xe5ea000000-0xe5ebffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[    0.000000] Memory: 5017492K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224592K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1909.864 MHz processor
[    0.000156] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.72 BogoMIPS (lpj=7639456)
[    0.010795] pid_max: default: 32768 minimum: 301
[    0.015451] ACPI: Core revision 20140424
[    0.021814] ACPI: All ACPI Tables successfully acquired
[    0.027180] Security Framework initialized
[    0.031305] AppArmor: AppArmor disabled by boot time parameter
[    0.037141] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.044869] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.058078] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.067852] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.074756] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.082615] Initializing cgroup subsys memory
[    0.086994] Initializing cgroup subsys devices
[    0.091463] Initializing cgroup subsys freezer
[    0.095927] Initializing cgroup subsys net_cls
[    0.100385] Initializing cgroup subsys blkio
[    0.104670] Initializing cgroup subsys perf_event
[    0.109380] Initializing cgroup subsys net_prio
[    0.113960] tseg: 0000000000
[    0.113974] CPU: Physical Processor ID: 0
[    0.117991] CPU: Processor Core ID: 0
[    0.121665] mce: CPU supports 6 MCE banks
[    0.125694] LVT offset 0 assigned for vector 0xf9
[    0.130420] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.145763] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
[    0.154773] ftrace: allocating 21601 entries in 85 pages
[    0.170149] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.215666] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
[    0.332510] Performance Events: AMD PMU driver.
[    0.337081] ... version:                0
[    0.341093] ... bit width:              48
[    0.345190] ... generic registers:      4
[    0.349201] ... value mask:             0000ffffffffffff
[    0.354530] ... max period:             00007fffffffffff
[    0.359848] ... fixed-purpose events:   0
[    0.363860] ... event mask:             000000000000000f
[    0.371790] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.379992] x86: Booting SMP configuration:
[    0.384180] .... node  #0, CPUs:      #1 #2 #3
[    0.428521] .... node  #1, CPUs:   #4 #5 #6 #7
[    0.581153] x86: Booted up 2 nodes, 8 CPUs
[    0.585455] smpboot: Total of 8 processors activated (30558.10 BogoMIPS)
[    0.597940] devtmpfs: initialized
[    0.609870] pinctrl core: initialized pinctrl subsystem
[    0.615272] NET: Registered protocol family 16
[    0.619932] cpuidle: using governor ladder
[    0.624035] cpuidle: using governor menu
[    0.627973] node 0 link 1: io port [1000, 3fff]
[    0.627976] TOM: 00000000c0000000 aka 3072M
[    0.632169] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
[    0.632173] node 0 link 1: mmio [fc000000, fc3fffff]
[    0.632177] node 0 link 1: mmio [f8000000, fbffffff]
[    0.632179] TOM2: 0000000180000000 aka 6144M
[    0.636458] bus: [bus 00-05] on node 0 link 1
[    0.636460] bus: 00 [io  0x0000-0xffff]
[    0.636462] bus: 00 [mem 0xd0000000-0xffffffff]
[    0.636464] bus: 00 [mem 0x180000000-0xfcffffffff]
[    0.636569] ACPI: bus type PCI registered
[    0.640591] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.647196] PCI: Using configuration type 1 for base access
[    0.652770] PCI: Using configuration type 1 for extended access
[    0.669343] ACPI: Added _OSI(Module Device)
[    0.673541] ACPI: Added _OSI(Processor Device)
[    0.677990] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.682703] ACPI: Added _OSI(Processor Aggregator Device)
[    0.691718] ACPI: Interpreter enabled
[    0.695401] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.704673] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[    0.713936] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[    0.723210] ACPI: (supports S0 S1 S5)
[    0.726880] ACPI: Using IOAPIC for interrupt routing
[    0.731896] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.760770] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[    0.766964] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.775178] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.815913] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.825983] PCI host bridge to bus 0000:00
[    0.830092] pci_bus 0000:00: root bus resource [bus 00-05]
[    0.835582] pci_bus 0000:00: root bus resource [io  0x0d00-0x3fff]
[    0.841769] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.848647] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[    0.855518] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
[    0.862396] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.868585] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.868777] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[    0.868784] pci 0000:00:01.0: reg 0x10: [io  0x2c00-0x2c7f]
[    0.868913] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.868925] pci 0000:00:01.1: reg 0x10: [io  0x3000-0x301f]
[    0.868949] pci 0000:00:01.1: reg 0x20: [io  0x2c80-0x2cbf]
[    0.868958] pci 0000:00:01.1: reg 0x24: [io  0x2cc0-0x2cff]
[    0.869000] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.869109] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.869120] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
[    0.869146] pci 0000:00:02.0: supports D1 D2
[    0.869175] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.869237] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.874957] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.874966] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
[    0.875016] pci 0000:00:02.1: supports D1 D2
[    0.875026] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.875084] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.880813] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.880848] pci 0000:00:06.0: reg 0x20: [io  0x3020-0x302f]
[    0.880868] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.888006] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.894539] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.901677] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.908313] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.908323] pci 0000:00:07.0: reg 0x10: [io  0x3050-0x3057]
[    0.908328] pci 0000:00:07.0: reg 0x14: [io  0x3070-0x3073]
[    0.908333] pci 0000:00:07.0: reg 0x18: [io  0x3058-0x305f]
[    0.908337] pci 0000:00:07.0: reg 0x1c: [io  0x3074-0x3077]
[    0.908342] pci 0000:00:07.0: reg 0x20: [io  0x3030-0x303f]
[    0.908347] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
[    0.908452] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.908463] pci 0000:00:08.0: reg 0x10: [io  0x3060-0x3067]
[    0.908467] pci 0000:00:08.0: reg 0x14: [io  0x3078-0x307b]
[    0.908472] pci 0000:00:08.0: reg 0x18: [io  0x3068-0x306f]
[    0.908476] pci 0000:00:08.0: reg 0x1c: [io  0x307c-0x307f]
[    0.908481] pci 0000:00:08.0: reg 0x20: [io  0x3040-0x304f]
[    0.908486] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
[    0.908628] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[    0.908753] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.914474] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.914516] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.914576] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.920298] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.920354] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.920407] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.926124] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.926174] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.926226] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.931949] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.931998] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.932055] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.937785] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.937923] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.938027] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.938147] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.938342] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.938454] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[    0.938605] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[    0.938729] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[    0.938852] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[    0.938993] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[    0.939172] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[    0.939191] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.939200] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
[    0.939207] pci 0000:01:04.0: reg 0x18: [io  0x1000-0x107f]
[    0.939251] pci 0000:01:04.0: supports D1 D2
[    0.939356] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.944340] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    0.944343] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.944346] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    0.944459] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[    0.944502] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
[    0.944538] pci 0000:02:00.0: reg 0x30: [mem 0x7be00000-0x7be0ffff pref]
[    0.944615] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.944726] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.954722] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.959691] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.959801] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[    0.959836] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
[    0.959927] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.960026] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.970021] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.974992] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    0.975068] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.980114] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    0.985114] pci_bus 0000:00: on NUMA node 0
[    0.985217] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    0.991370] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    0.997529] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    1.004852] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    1.012133] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    1.019438] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[    1.026752] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    1.032893] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[    1.039043] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[    1.046367] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    1.053675] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    1.060973] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[    1.067120] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[    1.073298] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[    1.080625] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[    1.087909] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[    1.095202] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.103738] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[    1.110223] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[    1.116699] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[    1.123155] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[    1.129899] ACPI: Enabled 1 GPEs in block 00 to 1F
[    1.135015] vgaarb: setting as boot device: PCI:0000:01:04.0
[    1.140681] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[    1.148777] vgaarb: loaded
[    1.151494] vgaarb: bridge control possible 0000:01:04.0
[    1.156980] PCI: Using ACPI for IRQ routing
[    1.161177] PCI: pci_cache_line_size set to 64 bytes
[    1.161235] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.161238] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
[    1.161559] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.168609] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    1.173670] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    1.182363] Switched to clocksource hpet
[    1.197931] pnp: PnP ACPI init
[    1.201043] ACPI: bus type PNP registered
[    1.205606] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.205687] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.205786] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.205865] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.205904] pnp 00:04: [dma 2]
[    1.205950] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.205971] pnp: PnP ACPI: found 5 devices
[    1.210082] ACPI: bus type PNP unregistered
[    1.222131] pci 0000:02:00.0: can't claim BAR 6 [mem 0x7be00000-0x7be0ffff pref]: no compatible bridge window
[    1.232083] pci 0000:00:09.0: PCI bridge to [bus 01]
[    1.237053] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    1.243150] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    1.249944] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    1.257176] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
[    1.264401] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.269375] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    1.276169] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    1.281130] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    1.287936] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    1.292911] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.297893] pci_bus 0000:00: resource 4 [io  0x0d00-0x3fff]
[    1.297895] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[    1.297898] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
[    1.297900] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
[    1.297903] pci_bus 0000:00: resource 8 [io  0x0000-0x0cf7]
[    1.297907] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    1.297909] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[    1.297911] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[    1.297914] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
[    1.297917] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
[    1.298072] NET: Registered protocol family 2
[    1.302957] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.310647] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.317991] TCP: Hash tables configured (established 65536 bind 65536)
[    1.324600] TCP: reno registered
[    1.327854] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.334069] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.340861] NET: Registered protocol family 1
[    1.345607] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    1.351689] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.357596] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.363143] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.368640] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    1.374225] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.379769] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.385282] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    1.390868] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.396400] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.401912] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    1.407502] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.413055] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.418559] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    1.424127] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.429659] pci 0000:01:04.0: Video device with shadowed ROM
[    1.429667] PCI: CLS 64 bytes, default 64
[    1.429776] Unpacking initramfs...
[    1.662883] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
[    1.670724] PCI-DMA: Disabling AGP.
[    1.675807] PCI-DMA: aperture base @ b4000000 size 65536 KB
[    1.681388] PCI-DMA: using GART IOMMU.
[    1.685146] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.697182] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.705365] microcode: CPU0: patch_level=0x01000084
[    1.710256] microcode: CPU1: patch_level=0x01000084
[    1.715150] microcode: CPU2: patch_level=0x01000084
[    1.720052] microcode: CPU3: patch_level=0x01000084
[    1.724957] microcode: CPU4: patch_level=0x01000084
[    1.729857] microcode: CPU5: patch_level=0x01000084
[    1.734757] microcode: CPU6: patch_level=0x01000084
[    1.739653] microcode: CPU7: patch_level=0x01000084
[    1.744639] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.753438] LVT offset 1 assigned for vector 0x400
[    1.758252] IBS: LVT offset 1 assigned
[    1.762034] perf: AMD IBS detected (0x00000007)
[    1.767191] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.773578] audit: initializing netlink subsys (disabled)
[    1.779005] audit: type=2000 audit(1447963831.516:1): initialized
[    1.785884] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.792292] zbud: loaded
[    1.795198] VFS: Disk quotas dquot_6.5.2
[    1.799173] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.805722] msgmni has been set to 9945
[    1.810101] alg: No test for stdrng (krng)
[    1.814268] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.821765] io scheduler noop registered
[    1.825698] io scheduler deadline registered
[    1.830060] io scheduler cfq registered (default)
[    1.834986] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[    1.835111] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[    1.835238] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[    1.835362] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[    1.835524] aer 0000:00:0b.0:pcie02: service driver aer loaded
[    1.835552] aer 0000:00:0c.0:pcie02: service driver aer loaded
[    1.835578] aer 0000:00:0d.0:pcie02: service driver aer loaded
[    1.835604] aer 0000:00:0e.0:pcie02: service driver aer loaded
[    1.835624] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    1.842595] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.849130] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    1.849141] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    1.856105] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.862637] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    1.862648] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[    1.869612] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[    1.869622] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[    1.876586] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[    1.876615] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.882226] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.888961] GHES: HEST is not enabled!
[    1.892847] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.919436] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.947118] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.955047] Linux agpgart interface v0.103
[    1.959353] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[    1.969701] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.974692] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.979974] mousedev: PS/2 mouse device common for all mice
[    1.985651] rtc_cmos rtc_cmos: RTC can wake from S4
[    1.990826] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    1.997307] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    2.005181] ledtrig-cpu: registered to indicate activity on CPUs
[    2.011381] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.014294] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.026436] AMD IOMMUv2 functionality not available on this system
[    2.032773] TCP: cubic registered
[    2.036247] NET: Registered protocol family 10
[    2.041079] mip6: Mobile IPv6
[    2.044068] NET: Registered protocol family 17
[    2.048522] mpls_gso: MPLS GSO support
[    2.053096] registered taskstats version 1
[    2.057988] rtc_cmos rtc_cmos: setting system clock to 2015-11-19 20:10:33 UTC (1447963833)
[    2.066431] PM: Hibernation image not present or could not be loaded.
[    2.068231] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
[    2.076090] Write protecting the kernel read-only data: 8192k
[    2.085331] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
[    2.093923] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    2.117929] systemd-udevd[99]: starting version 215
[    2.123701] random: systemd-udevd urandom read with 3 bits of entropy available
[    2.155544] pps_core: LinuxPPS API ver. 1 registered
[    2.160526] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.170153] ACPI: bus type USB registered
[    2.174343] usbcore: registered new interface driver usbfs
[    2.174386] PTP clock support registered
[    2.183874] usbcore: registered new interface driver hub
[    2.189439] usbcore: registered new device driver usb
[    2.189528] tg3.c:v3.137 (May 11, 2014)
[    2.189541] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[    2.189748] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[    2.210751] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.217864] ehci-pci: EHCI PCI platform driver
[    2.222594] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.222656] ehci-pci 0000:00:02.1: EHCI Host Controller
[    2.222679] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    2.222700] ehci-pci 0000:00:02.1: debug port 1
[    2.222746] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    2.222777] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
[    2.234052] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.234116] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.234118] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.234120] usb usb1: Product: EHCI Host Controller
[    2.234121] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.234122] usb usb1: SerialNumber: 0000:00:02.1
[    2.234333] hub 1-0:1.0: USB hub found
[    2.234341] hub 1-0:1.0: 10 ports detected
[    2.295517] ohci-pci: OHCI PCI platform driver
[    2.300200] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    2.305826] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.313300] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
[    2.336463] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[    2.346725] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.356466] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.364297] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.371106] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[    2.376915] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[    2.380022] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.380024] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.380025] usb usb2: Product: OHCI PCI host controller
[    2.380027] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.380028] usb usb2: SerialNumber: 0000:00:02.0
[    2.380225] hub 2-0:1.0: USB hub found
[    2.380234] hub 2-0:1.0: 10 ports detected
[    2.466482] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[    2.476749] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.486484] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.494315] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.507518] FS-Cache: Loaded
[    2.514642] RPC: Registered named UNIX socket transport module.
[    2.521236] RPC: Registered udp transport module.
[    2.527330] RPC: Registered tcp transport module.
[    2.533421] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.545914] FS-Cache: Netfs 'nfs' registered for caching
[    2.559573] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[    2.605998] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    2.693858] tsc: Refined TSC clocksource calibration: 1909.787 MHz
[    3.697607] Switched to clocksource tsc
[    4.397340] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
[    4.403868] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[    4.410756] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    5.061370] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    5.075065] systemd[1]: Detected architecture 'x86-64'.
[    5.287573] systemd[1]: Inserted module 'autofs4'
[    5.293587] systemd[1]: Set hostname to <cb-test-tgt>.
[    5.372208] random: nonblocking pool is initialized
[    5.533565] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[    5.546290] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    5.561691] systemd[1]: Expecting device dev-ttyS0.device...
[    5.576925] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    5.584644] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.592230] systemd[1]: Starting Remote File Systems (Pre).
[    5.608963] systemd[1]: Reached target Remote File Systems (Pre).
[    5.615136] systemd[1]: Starting Encrypted Volumes.
[    5.628881] systemd[1]: Reached target Encrypted Volumes.
[    5.634341] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    5.656874] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.666303] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    5.674345] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.682278] systemd[1]: Starting Paths.
[    5.696857] systemd[1]: Reached target Paths.
[    5.701256] systemd[1]: Starting Swap.
[    5.712841] systemd[1]: Reached target Swap.
[    5.717133] systemd[1]: Starting Root Slice.
[    5.728842] systemd[1]: Created slice Root Slice.
[    5.733569] systemd[1]: Starting User and Session Slice.
[    5.748841] systemd[1]: Created slice User and Session Slice.
[    5.754605] systemd[1]: Starting Delayed Shutdown Socket.
[    5.768830] systemd[1]: Listening on Delayed Shutdown Socket.
[    5.774597] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    5.792843] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.799825] systemd[1]: Starting Journal Socket (/dev/log).
[    5.816817] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.822764] systemd[1]: Starting udev Kernel Socket.
[    5.836896] systemd[1]: Listening on udev Kernel Socket.
[    5.842290] systemd[1]: Starting udev Control Socket.
[    5.856804] systemd[1]: Listening on udev Control Socket.
[    5.862252] systemd[1]: Starting Journal Socket.
[    5.876782] systemd[1]: Listening on Journal Socket.
[    5.881797] systemd[1]: Starting System Slice.
[    5.896777] systemd[1]: Created slice System Slice.
[    5.901681] systemd[1]: Starting system-getty.slice.
[    5.916789] systemd[1]: Created slice system-getty.slice.
[    5.922215] systemd[1]: Starting system-serial\x2dgetty.slice.
[    5.936780] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    5.943092] systemd[1]: Starting Increase datagram queue length...
[    5.961683] systemd[1]: Starting udev Coldplug all Devices...
[    6.186099] systemd[1]: Starting Load Kernel Modules...
[    6.211648] systemd[1]: Started Set Up Additional Binary Formats.
[    6.217974] systemd[1]: Mounting Debug File System...
[    6.234476] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.258169] systemd[1]: Mounting POSIX Message Queue File System...
[    6.277935] systemd[1]: Mounting Huge Pages File System...
[    6.293803] systemd[1]: Starting Slices.
[    6.308717] systemd[1]: Reached target Slices.
[    6.313258] systemd[1]: Starting Remount Root and Kernel File Systems...
[    6.344703] systemd[1]: Mounted Huge Pages File System.
[    6.360633] systemd[1]: Mounted POSIX Message Queue File System.
[    6.376689] systemd[1]: Mounted Debug File System.
[    6.392683] systemd[1]: Started Increase datagram queue length.
[    6.408669] systemd[1]: Started Load Kernel Modules.
[    6.428652] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    6.448673] systemd[1]: Started Remount Root and Kernel File Systems.
[    6.464605] systemd[1]: Started udev Coldplug all Devices.
[    6.510687] systemd[1]: Started Various fixups to make systemd work better on Debian.
[    6.518553] systemd[1]: Starting Load/Save Random Seed...
[    6.533611] systemd[1]: Starting Create Static Device Nodes in /dev...
[    6.549578] systemd[1]: Starting Apply Kernel Variables...
[    6.565489] systemd[1]: Mounted Configuration File System.
[    6.571032] systemd[1]: Mounted FUSE Control File System.
[    6.576446] systemd[1]: Starting Syslog Socket.
[    6.588627] systemd[1]: Listening on Syslog Socket.
[    6.593609] systemd[1]: Starting Sockets.
[    6.608615] systemd[1]: Reached target Sockets.
[    6.613284] systemd[1]: Starting Journal Service...
[    6.636582] systemd[1]: Started Journal Service.
[    6.773516] systemd-udevd[192]: starting version 215
[    7.039207] systemd-journald[191]: Received request to flush runtime journal from PID 1
[    7.475493] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[    7.483398] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[    7.483658] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    7.483666] ACPI: Power Button [PWRB]
[    7.483740] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    7.483742] ACPI: Power Button [PWRF]
[    7.517497] EDAC MC: Ver: 3.0.0
[    7.521484] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.536243] FDC 0 is a post-1991 82077
[    7.564723] SCSI subsystem initialized
[    7.618447] MCE: In-kernel MCE decoding enabled.
[    7.623551] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[    7.628914] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[    7.629206] acpi-cpufreq: overriding BIOS provided _PSD data
[    7.657094] libata version 3.00 loaded.
[    7.660904] AMD64 EDAC driver v3.4.0
[    7.664629] EDAC amd64: DRAM ECC enabled.
[    7.668741] EDAC amd64: F10h detected (node 0).
[    7.673365] EDAC MC: DCT0 chip selects:
[    7.673368] EDAC amd64: MC: 0:     0MB 1:     0MB
[    7.678111] EDAC amd64: MC: 2:     0MB 3:     0MB
[    7.682861] EDAC amd64: MC: 4:     0MB 5:     0MB
[    7.687610] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[    7.688048] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    7.698864] EDAC MC: DCT1 chip selects:
[    7.698868] EDAC amd64: MC: 0:     0MB 1:     0MB
[    7.703616] EDAC amd64: MC: 2:     0MB 3:     0MB
[    7.708354] EDAC amd64: MC: 4:     0MB 5:     0MB
[    7.713093] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[    7.717831] EDAC amd64: using x4 syndromes.
[    7.722051] EDAC amd64: MCT channel count: 2
[    7.726382] EDAC amd64: CS6: Registered DDR2 RAM
[    7.731037] EDAC amd64: CS7: Registered DDR2 RAM
[    7.736233] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[    7.746606] EDAC amd64: DRAM ECC enabled.
[    7.750727] EDAC amd64: F10h detected (node 1).
[    7.755503] EDAC MC: DCT0 chip selects:
[    7.755505] EDAC amd64: MC: 0:  1024MB 1:     0MB
[    7.760286] EDAC amd64: MC: 2:     0MB 3:     0MB
[    7.765052] EDAC amd64: MC: 4:     0MB 5:     0MB
[    7.769821] EDAC amd64: MC: 6:     0MB 7:     0MB
[    7.774573] EDAC MC: DCT1 chip selects:
[    7.774575] EDAC amd64: MC: 0:     0MB 1:     0MB
[    7.779345] EDAC amd64: MC: 2:     0MB 3:     0MB
[    7.784115] EDAC amd64: MC: 4:     0MB 5:     0MB
[    7.788871] EDAC amd64: MC: 6:     0MB 7:     0MB
[    7.793557] EDAC amd64: using x4 syndromes.
[    7.797792] EDAC amd64: MCT channel count: 1
[    7.802390] EDAC amd64: CS0: Registered DDR2 RAM
[    7.808486] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
[    7.819482] sata_nv 0000:00:07.0: version 3.5
[    7.819511] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[    7.819909] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[    7.820791] scsi0 : sata_nv
[    7.839814] kvm: Nested Virtualization enabled
[    7.840172] scsi1 : sata_nv
[    7.840253] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[    7.840257] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[    7.840517] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[    7.841021] scsi2 : sata_nv
[    7.841172] scsi3 : sata_nv
[    7.841246] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[    7.841247] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[    7.886920] pata_amd 0000:00:06.0: version 0.4.1
[    7.887477] kvm: Nested Paging enabled
[    7.887566] scsi4 : pata_amd
[    7.887742] scsi5 : pata_amd
[    7.887805] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[    7.887806] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[    8.151981] ata3: SATA link down (SStatus 0 SControl 300)
[    8.151993] ata1: SATA link down (SStatus 0 SControl 300)
[    8.463894] ata2: SATA link down (SStatus 0 SControl 300)
[    8.779769] ata4: SATA link down (SStatus 0 SControl 300)
[   38.622845] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****