[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffaafff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dffab000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-9483-g8ee0777-dirty 04/26/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x160000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 base 0000F8000000 mask FFFFFC000000 write-combining
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000160000000 aka 5632M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xdffab max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15fe00000-0x15fffffff]
[    0.000000]  [mem 0x15fe00000-0x15fffffff] page 2M
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15c000000-0x15fdfffff]
[    0.000000]  [mem 0x15c000000-0x15fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
[    0.000000]  [mem 0x100000000-0x13fffffff] page 1G
[    0.000000]  [mem 0x140000000-0x15bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xdffaafff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xdfdfffff] page 2M
[    0.000000]  [mem 0xdfe00000-0xdffaafff] page 4k
[    0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000DFFB40E0 000064 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000DFFB68A0 000074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000DFFB4250 002644 (v02 ASUS   COREBOOT 00000001 INTL 20150204)
[    0.000000] ACPI: FACS 0x00000000DFFB4210 000040
[    0.000000] ACPI: SSDT 0x00000000DFFB69A0 000D57 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: APIC 0x00000000DFFB7700 0000C6 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB77D0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB7948 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000DFFB7980 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB79C0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB7B38 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff]
[    0.000000] SRAT: Node 1 PXM 1 [mem 0x120000000-0x15fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=3
[    0.000000] NUMA: node 2 [mem 0x00100000-0xdfffffff] overlaps with node 0 [mem 0x00100000-0xdfffffff]
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of physical nodes 2
[    0.000000] Node 0 MemBase 0000000000000000 Limit 0000000120000000
[    0.000000] Node 1 MemBase 0000000120000000 Limit 0000000160000000
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
[    0.000000]   NODE_DATA [mem 0x11fffb000-0x11fffffff]
[    0.000000] Initmem setup node 1 [mem 0x120000000-0x15fffffff]
[    0.000000]   NODE_DATA [mem 0x15fff9000-0x15fffdfff]
[    0.000000] [ffffea0003f00000-ffffea0003ffffff] potential offnode page_structs
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0
[    0.000000]  [ffffea0004000000-ffffea0004dfffff] PMD -> [ffff88015e600000-ffff88015f3fffff] on node 1
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x15fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xdffaafff]
[    0.000000]   node   0: [mem 0x100000000-0x11fffffff]
[    0.000000]   node   1: [mem 0x120000000-0x15fffffff]
[    0.000000] On node 0 totalpages: 1048393
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12487 pages used for memmap
[    0.000000]   DMA32 zone: 913323 pages, LIFO batch:31
[    0.000000]   Normal zone: 1792 pages used for memmap
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] On node 1 totalpages: 262144
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdffab000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xffffffff]
[    0.000000] e820: [mem 0xf0000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 
[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1292597
[    0.000000] Policy zone: Normal
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xf5fa000000-0xf5fbffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
[    0.000000] Memory: 5015508K/5242148K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 226640K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1909.856 MHz processor
[    0.000160] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.71 BogoMIPS (lpj=7639424)
[    0.010963] pid_max: default: 32768 minimum: 301
[    0.015684] ACPI: Core revision 20140424
[    0.022096] ACPI: All ACPI Tables successfully acquired
[    0.027618] Security Framework initialized
[    0.031797] AppArmor: AppArmor disabled by boot time parameter
[    0.037711] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.045520] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.058783] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.068587] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.075580] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.083538] Initializing cgroup subsys memory
[    0.088016] Initializing cgroup subsys devices
[    0.092562] Initializing cgroup subsys freezer
[    0.097096] Initializing cgroup subsys net_cls
[    0.101630] Initializing cgroup subsys blkio
[    0.105986] Initializing cgroup subsys perf_event
[    0.110784] Initializing cgroup subsys net_prio
[    0.115448] tseg: 0000000000
[    0.115462] CPU: Physical Processor ID: 0
[    0.119583] CPU: Processor Core ID: 0
[    0.124378] mce: CPU supports 6 MCE banks
[    0.128487] LVT offset 0 assigned for vector 0xf9
[    0.133280] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.148768] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
[    0.157903] ftrace: allocating 21601 entries in 85 pages
[    0.173362] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.219007] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
[    0.336304] Performance Events: AMD PMU driver.
[    0.341028] ... version:                0
[    0.345123] ... bit width:              48
[    0.349306] ... generic registers:      4
[    0.353384] ... value mask:             0000ffffffffffff
[    0.358804] ... max period:             00007fffffffffff
[    0.364182] ... fixed-purpose events:   0
[    0.368286] ... event mask:             000000000000000f
[    0.376311] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.384645] x86: Booting SMP configuration:
[    0.388915] .... node  #0, CPUs:      #1 #2 #3
[    0.433521] .... node  #1, CPUs:   #4 #5 #6 #7
[    0.585116] x86: Booted up 2 nodes, 8 CPUs
[    0.589543] smpboot: Total of 8 processors activated (30558.10 BogoMIPS)
[    0.602194] devtmpfs: initialized
[    0.614206] pinctrl core: initialized pinctrl subsystem
[    0.619689] NET: Registered protocol family 16
[    0.624425] cpuidle: using governor ladder
[    0.628598] cpuidle: using governor menu
[    0.632607] node 0 link 1: io port [1000, 3fff]
[    0.632610] TOM: 00000000e0000000 aka 3584M
[    0.636872] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.636876] node 0 link 1: mmio [fc000000, fc3fffff]
[    0.636879] node 0 link 1: mmio [f8000000, fbffffff]
[    0.636881] TOM2: 0000000160000000 aka 5632M
[    0.641223] bus: [bus 00-05] on node 0 link 1
[    0.641225] bus: 00 [io  0x0000-0xffff]
[    0.641226] bus: 00 [mem 0xf0000000-0xffffffff]
[    0.641228] bus: 00 [mem 0x160000000-0xfcffffffff]
[    0.641334] ACPI: bus type PCI registered
[    0.645422] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.652095] PCI: Using configuration type 1 for base access
[    0.657744] PCI: Using configuration type 1 for extended access
[    0.664362] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.670722] mtrr: probably your BIOS does not setup all CPUs.
[    0.676545] mtrr: corrected configuration.
[    0.693193] ACPI: Added _OSI(Module Device)
[    0.697492] ACPI: Added _OSI(Processor Device)
[    0.702005] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.706788] ACPI: Added _OSI(Processor Aggregator Device)
[    0.715675] ACPI: Interpreter enabled
[    0.719423] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.728881] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[    0.738335] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[    0.747782] ACPI: (supports S0 S1 S5)
[    0.751533] ACPI: Using IOAPIC for interrupt routing
[    0.756625] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.784824] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[    0.791097] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.799413] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.838009] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.848136] PCI host bridge to bus 0000:00
[    0.852312] pci_bus 0000:00: root bus resource [bus 00-05]
[    0.857867] pci_bus 0000:00: root bus resource [io  0x0d00-0x3fff]
[    0.864129] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[    0.871083] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
[    0.878040] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.884308] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.884505] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[    0.884512] pci 0000:00:01.0: reg 0x10: [io  0x2c00-0x2c7f]
[    0.884644] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.884652] pci 0000:00:01.1: reg 0x10: [io  0x3000-0x301f]
[    0.884677] pci 0000:00:01.1: reg 0x20: [io  0x2c80-0x2cbf]
[    0.884685] pci 0000:00:01.1: reg 0x24: [io  0x2cc0-0x2cff]
[    0.884728] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.884828] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.884844] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
[    0.884870] pci 0000:00:02.0: supports D1 D2
[    0.884882] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.884930] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.890739] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.890752] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
[    0.890794] pci 0000:00:02.1: supports D1 D2
[    0.890813] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.890882] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.896691] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.896717] pci 0000:00:06.0: reg 0x20: [io  0x3020-0x302f]
[    0.896745] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.903972] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.910588] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.917816] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.924536] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.924551] pci 0000:00:07.0: reg 0x10: [io  0x3050-0x3057]
[    0.924564] pci 0000:00:07.0: reg 0x14: [io  0x3070-0x3073]
[    0.924568] pci 0000:00:07.0: reg 0x18: [io  0x3058-0x305f]
[    0.924573] pci 0000:00:07.0: reg 0x1c: [io  0x3074-0x3077]
[    0.924578] pci 0000:00:07.0: reg 0x20: [io  0x3030-0x303f]
[    0.924583] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
[    0.924729] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.924739] pci 0000:00:08.0: reg 0x10: [io  0x3060-0x3067]
[    0.924744] pci 0000:00:08.0: reg 0x14: [io  0x3078-0x307b]
[    0.924749] pci 0000:00:08.0: reg 0x18: [io  0x3068-0x306f]
[    0.924753] pci 0000:00:08.0: reg 0x1c: [io  0x307c-0x307f]
[    0.924758] pci 0000:00:08.0: reg 0x20: [io  0x3040-0x304f]
[    0.924763] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
[    0.924921] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[    0.925041] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.930838] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.930888] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.930937] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.936734] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.936789] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.936845] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.942664] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.942718] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.942768] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.948573] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.948622] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.948679] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.954500] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.954676] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.954788] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.954907] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.955049] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.955214] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[    0.955345] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[    0.955483] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[    0.955609] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[    0.955751] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[    0.955943] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[    0.955963] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.955973] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
[    0.955980] pci 0000:01:04.0: reg 0x18: [io  0x1000-0x107f]
[    0.956027] pci 0000:01:04.0: supports D1 D2
[    0.956137] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.961182] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    0.961186] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.961189] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    0.961308] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[    0.961348] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
[    0.961383] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref]
[    0.961475] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.961559] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.971693] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.976756] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.976859] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[    0.976885] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
[    0.977000] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.977080] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.987206] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.992249] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    0.992334] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.997458] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.002544] pci_bus 0000:00: on NUMA node 0
[    1.002646] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    1.009070] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    1.015496] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    1.023190] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    1.030848] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    1.038510] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[    1.046165] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    1.052584] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[    1.059001] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[    1.066672] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    1.074345] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    1.081993] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[    1.088456] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[    1.094875] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[    1.102529] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[    1.110196] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[    1.117855] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.126959] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[    1.133671] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[    1.140387] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[    1.147087] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[    1.154090] ACPI: Enabled 1 GPEs in block 00 to 1F
[    1.159342] vgaarb: setting as boot device: PCI:0000:01:04.0
[    1.165129] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[    1.173328] vgaarb: loaded
[    1.176119] vgaarb: bridge control possible 0000:01:04.0
[    1.181674] PCI: Using ACPI for IRQ routing
[    1.185954] PCI: pci_cache_line_size set to 64 bytes
[    1.186011] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.186015] e820: reserve RAM buffer [mem 0xdffab000-0xdfffffff]
[    1.186330] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.193465] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    1.198757] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    1.207494] Switched to clocksource hpet
[    1.223015] pnp: PnP ACPI init
[    1.226232] ACPI: bus type PNP registered
[    1.230872] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.230953] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.231053] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.231133] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.231173] pnp 00:04: [dma 2]
[    1.231216] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.231238] pnp: PnP ACPI: found 5 devices
[    1.235422] ACPI: bus type PNP unregistered
[    1.247505] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window
[    1.257564] pci 0000:00:09.0: PCI bridge to [bus 01]
[    1.262611] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    1.268796] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    1.275672] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    1.283009] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
[    1.290344] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.295394] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    1.302271] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    1.307315] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    1.314190] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    1.319237] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.324281] pci_bus 0000:00: resource 4 [io  0x0d00-0x3fff]
[    1.324283] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
[    1.324286] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
[    1.324289] pci_bus 0000:00: resource 7 [io  0x0000-0x0cf7]
[    1.324292] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    1.324294] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[    1.324297] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[    1.324300] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
[    1.324303] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
[    1.324440] NET: Registered protocol family 2
[    1.329401] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.337176] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.344588] TCP: Hash tables configured (established 65536 bind 65536)
[    1.351278] TCP: reno registered
[    1.354605] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.360880] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.367742] NET: Registered protocol family 1
[    1.372583] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    1.378797] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.384775] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.390382] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.395967] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    1.401616] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.407231] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.412831] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    1.418492] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.424089] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.429674] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    1.435326] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.440937] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.446525] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    1.452176] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.457765] pci 0000:01:04.0: Video device with shadowed ROM
[    1.457773] PCI: CLS 64 bytes, default 64
[    1.457881] Unpacking initramfs...
[    1.690973] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
[    1.698923] PCI-DMA: Disabling AGP.
[    1.704114] PCI-DMA: aperture base @ d4000000 size 65536 KB
[    1.709782] PCI-DMA: using GART IOMMU.
[    1.713620] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.725736] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.734083] microcode: CPU0: patch_level=0x01000096
[    1.739079] microcode: CPU1: patch_level=0x01000096
[    1.744089] microcode: CPU2: patch_level=0x01000096
[    1.749099] microcode: CPU3: patch_level=0x01000096
[    1.754115] microcode: CPU4: patch_level=0x01000096
[    1.759118] microcode: CPU5: patch_level=0x01000096
[    1.764114] microcode: CPU6: patch_level=0x01000096
[    1.770217] microcode: CPU7: patch_level=0x01000096
[    1.775316] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.784232] LVT offset 1 assigned for vector 0x400
[    1.789129] IBS: LVT offset 1 assigned
[    1.792998] perf: AMD IBS detected (0x00000007)
[    1.798218] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.804701] audit: initializing netlink subsys (disabled)
[    1.810209] audit: type=2000 audit(1430079303.620:1): initialized
[    1.817125] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.823626] zbud: loaded
[    1.826618] VFS: Disk quotas dquot_6.5.2
[    1.830674] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.837310] msgmni has been set to 9941
[    1.841777] alg: No test for stdrng (krng)
[    1.846078] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.853725] io scheduler noop registered
[    1.857764] io scheduler deadline registered
[    1.862230] io scheduler cfq registered (default)
[    1.867235] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[    1.867369] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[    1.867511] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[    1.867633] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[    1.867780] aer 0000:00:0b.0:pcie02: service driver aer loaded
[    1.867808] aer 0000:00:0c.0:pcie02: service driver aer loaded
[    1.867834] aer 0000:00:0d.0:pcie02: service driver aer loaded
[    1.867859] aer 0000:00:0e.0:pcie02: service driver aer loaded
[    1.867879] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    1.874968] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.881588] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    1.881598] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    1.888650] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.895259] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    1.895270] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[    1.902313] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[    1.902325] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[    1.909366] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[    1.909395] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.915070] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.921900] GHES: HEST is not enabled!
[    1.925867] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.952658] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.980442] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.988462] Linux agpgart interface v0.103
[    1.992871] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[    2.003401] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.008512] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.013835] mousedev: PS/2 mouse device common for all mice
[    2.019637] rtc_cmos rtc_cmos: RTC can wake from S4
[    2.024840] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    2.031325] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    2.039299] ledtrig-cpu: registered to indicate activity on CPUs
[    2.045563] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.052113] AMD IOMMUv2 functionality not available on this system
[    2.058518] TCP: cubic registered
[    2.062087] NET: Registered protocol family 10
[    2.067043] mip6: Mobile IPv6
[    2.070117] NET: Registered protocol family 17
[    2.074714] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.083494] mpls_gso: MPLS GSO support
[    2.088216] registered taskstats version 1
[    2.093131] rtc_cmos rtc_cmos: setting system clock to 2015-04-26 20:15:05 UTC (1430079305)
[    2.101720] PM: Hibernation image not present or could not be loaded.
[    2.103543] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
[    2.111553] Write protecting the kernel read-only data: 8192k
[    2.120869] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
[    2.129600] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    2.149820] systemd-udevd[99]: starting version 215
[    2.155381] random: systemd-udevd urandom read with 4 bits of entropy available
[    2.177745] pps_core: LinuxPPS API ver. 1 registered
[    2.182847] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.192452] ACPI: bus type USB registered
[    2.196777] usbcore: registered new interface driver usbfs
[    2.196823] PTP clock support registered
[    2.206479] usbcore: registered new interface driver hub
[    2.212181] usbcore: registered new device driver usb
[    2.212313] tg3.c:v3.137 (May 11, 2014)
[    2.212326] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[    2.212533] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[    2.233863] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.241188] ehci-pci: EHCI PCI platform driver
[    2.246044] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.246120] ehci-pci 0000:00:02.1: EHCI Host Controller
[    2.246145] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    2.246168] ehci-pci 0000:00:02.1: debug port 1
[    2.246214] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    2.246246] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
[    2.255159] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.255240] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.255242] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.255243] usb usb1: Product: EHCI Host Controller
[    2.255245] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.255246] usb usb1: SerialNumber: 0000:00:02.1
[    2.255492] hub 1-0:1.0: USB hub found
[    2.255502] hub 1-0:1.0: 10 ports detected
[    2.319947] ohci-pci: OHCI PCI platform driver
[    2.324734] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    2.330492] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.338059] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
[    2.362239] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[    2.372673] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.382524] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.390460] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.397348] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[    2.401161] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.401163] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.401164] usb usb2: Product: OHCI PCI host controller
[    2.401166] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.401167] usb usb2: SerialNumber: 0000:00:02.0
[    2.401358] hub 2-0:1.0: USB hub found
[    2.401366] hub 2-0:1.0: 10 ports detected
[    2.441577] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[    2.499141] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[    2.509576] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.519430] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.527370] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.540707] FS-Cache: Loaded
[    2.547907] RPC: Registered named UNIX socket transport module.
[    2.554520] RPC: Registered udp transport module.
[    2.560597] RPC: Registered tcp transport module.
[    2.566683] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.579219] FS-Cache: Netfs 'nfs' registered for caching
[    2.592856] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[    2.639119] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    2.722988] tsc: Refined TSC clocksource calibration: 1909.787 MHz
[    3.726733] Switched to clocksource tsc
[    4.218960] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
[    4.225641] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[    4.232643] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    5.143835] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    5.157703] systemd[1]: Detected architecture 'x86-64'.
[    5.951924] random: nonblocking pool is initialized
[    5.962488] systemd[1]: Inserted module 'autofs4'
[    5.969312] systemd[1]: Set hostname to <cb-test-tgt>.
[    6.500019] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[    6.512922] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    6.528304] systemd[1]: Expecting device dev-ttyS0.device...
[    6.541822] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    6.549828] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.557541] systemd[1]: Starting Remote File Systems (Pre).
[    6.573807] systemd[1]: Reached target Remote File Systems (Pre).
[    6.580190] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    6.601700] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.611282] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    6.619474] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.627510] systemd[1]: Starting Paths.
[    6.641679] systemd[1]: Reached target Paths.
[    6.646173] systemd[1]: Starting Encrypted Volumes.
[    6.661679] systemd[1]: Reached target Encrypted Volumes.
[    6.667258] systemd[1]: Starting Swap.
[    6.681657] systemd[1]: Reached target Swap.
[    6.686068] systemd[1]: Starting Root Slice.
[    6.709678] systemd[1]: Created slice Root Slice.
[    6.714552] systemd[1]: Starting User and Session Slice.
[    6.729665] systemd[1]: Created slice User and Session Slice.
[    6.735531] systemd[1]: Starting Delayed Shutdown Socket.
[    6.749649] systemd[1]: Listening on Delayed Shutdown Socket.
[    6.755543] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    6.773620] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.780728] systemd[1]: Starting Journal Socket (/dev/log).
[    6.797611] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.803647] systemd[1]: Starting Syslog Socket.
[    6.817623] systemd[1]: Listening on Syslog Socket.
[    6.823744] systemd[1]: Starting udev Kernel Socket.
[    6.837610] systemd[1]: Listening on udev Kernel Socket.
[    6.843053] systemd[1]: Starting udev Control Socket.
[    6.857624] systemd[1]: Listening on udev Control Socket.
[    6.863177] systemd[1]: Starting Journal Socket.
[    6.877587] systemd[1]: Listening on Journal Socket.
[    6.882743] systemd[1]: Starting Sockets.
[    6.897578] systemd[1]: Reached target Sockets.
[    6.902264] systemd[1]: Starting System Slice.
[    6.917575] systemd[1]: Created slice System Slice.
[    6.922592] systemd[1]: Starting system-getty.slice.
[    6.937572] systemd[1]: Created slice system-getty.slice.
[    6.943112] systemd[1]: Starting system-serial\x2dgetty.slice.
[    6.961643] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    6.968730] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.990813] systemd[1]: Mounting Debug File System...
[    7.018474] systemd[1]: Started Set Up Additional Binary Formats.
[    7.024726] systemd[1]: Mounting Huge Pages File System...
[    7.069671] systemd[1]: Starting Load Kernel Modules...
[    7.087191] systemd[1]: Mounting POSIX Message Queue File System...
[    7.107992] systemd[1]: Starting udev Coldplug all Devices...
[    7.126801] systemd[1]: Starting Journal Service...
[    7.153528] systemd[1]: Started Journal Service.
[    7.988405] systemd-udevd[189]: starting version 215
[    8.260662] systemd-journald[168]: Received request to flush runtime journal from PID 1
[    9.022167] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[    9.030266] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[    9.039050] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    9.047767] ACPI: Power Button [PWRB]
[    9.047891] EDAC MC: Ver: 3.0.0
[    9.054936] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    9.062523] ACPI: Power Button [PWRF]
[    9.086673] SCSI subsystem initialized
[    9.112855] FDC 0 is a post-1991 82077
[    9.154966] MCE: In-kernel MCE decoding enabled.
[    9.189254] libata version 3.00 loaded.
[    9.192203] acpi-cpufreq: overriding BIOS provided _PSD data
[    9.198440] AMD64 EDAC driver v3.4.0
[    9.198704] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    9.216939] w83793 0-002f: Registered watchdog chardev major 10, minor: 130
[    9.224057] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[    9.324024] kvm: Nested Virtualization enabled
[    9.328648] kvm: Nested Paging enabled
[   12.459631] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[   12.465156] EDAC amd64: DRAM ECC enabled.
[   12.469335] EDAC amd64: F10h detected (node 0).
[   12.474056] EDAC MC: DCT0 chip selects:
[   12.474059] EDAC amd64: MC: 0:     0MB 1:     0MB
[   12.478894] EDAC amd64: MC: 2:     0MB 3:     0MB
[   12.483699] EDAC amd64: MC: 4:     0MB 5:     0MB
[   12.488510] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   12.493316] EDAC MC: DCT1 chip selects:
[   12.493320] EDAC amd64: MC: 0:     0MB 1:     0MB
[   12.498120] EDAC amd64: MC: 2:     0MB 3:     0MB
[   12.502930] EDAC amd64: MC: 4:     0MB 5:     0MB
[   12.507730] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   12.512540] EDAC amd64: using x4 syndromes.
[   12.516825] EDAC amd64: MCT channel count: 2
[   12.521259] EDAC amd64: CS6: Registered DDR2 RAM
[   12.525974] EDAC amd64: CS7: Registered DDR2 RAM
[   12.531132] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[   12.541027] EDAC amd64: DRAM ECC enabled.
[   12.545227] EDAC amd64: F10h detected (node 1).
[   12.549914] EDAC MC: DCT0 chip selects:
[   12.549918] EDAC amd64: MC: 0:  1024MB 1:     0MB
[   12.554729] EDAC amd64: MC: 2:     0MB 3:     0MB
[   12.559536] EDAC amd64: MC: 4:     0MB 5:     0MB
[   12.564343] EDAC amd64: MC: 6:     0MB 7:     0MB
[   12.569151] EDAC MC: DCT1 chip selects:
[   12.569154] EDAC amd64: MC: 0:     0MB 1:     0MB
[   12.573967] EDAC amd64: MC: 2:     0MB 3:     0MB
[   12.578779] EDAC amd64: MC: 4:     0MB 5:     0MB
[   12.583574] EDAC amd64: MC: 6:     0MB 7:     0MB
[   12.588384] EDAC amd64: using x4 syndromes.
[   12.592671] EDAC amd64: MCT channel count: 1
[   12.597126] EDAC amd64: CS0: Registered DDR2 RAM
[   12.602135] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
[   12.612059] sata_nv 0000:00:07.0: version 3.5
[   12.612074] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[   12.612456] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[   12.613183] scsi0 : sata_nv
[   12.632077] scsi1 : sata_nv
[   12.635125] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[   12.642381] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[   12.649940] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[   12.656236] scsi2 : sata_nv
[   12.659293] scsi3 : sata_nv
[   12.662246] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[   12.669478] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[   12.676802] pata_amd 0000:00:06.0: version 0.4.1
[   12.677556] scsi4 : pata_amd
[   12.680744] scsi5 : pata_amd
[   12.683799] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[   12.690910] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[   12.698219] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.959479] ata1: SATA link down (SStatus 0 SControl 300)
[   12.987460] ata3: SATA link down (SStatus 0 SControl 300)
[   13.275355] ata2: SATA link down (SStatus 0 SControl 300)
[   13.591239] ata4: SATA link down (SStatus 0 SControl 300)