[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffa8fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dffa9000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-8751-ga73dcbe-dirty 04/01/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x160000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 base 0000F8000000 mask FFFFFC000000 write-combining
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000160000000 aka 5632M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xdffa9 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15fe00000-0x15fffffff]
[    0.000000]  [mem 0x15fe00000-0x15fffffff] page 2M
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15c000000-0x15fdfffff]
[    0.000000]  [mem 0x15c000000-0x15fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
[    0.000000]  [mem 0x100000000-0x13fffffff] page 1G
[    0.000000]  [mem 0x140000000-0x15bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xdffa8fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xdfdfffff] page 2M
[    0.000000]  [mem 0xdfe00000-0xdffa8fff] page 4k
[    0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000DFFB20E0 000064 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000DFFB48A0 000074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000DFFB2250 002644 (v02 ASUS   COREBOOT 00000001 INTL 20150204)
[    0.000000] ACPI: FACS 0x00000000DFFB2210 000040
[    0.000000] ACPI: SSDT 0x00000000DFFB49A0 000D57 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: APIC 0x00000000DFFB5700 0000C6 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB57D0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB5948 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000DFFB5980 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB59C0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB5B38 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff]
[    0.000000] SRAT: Node 1 PXM 1 [mem 0x120000000-0x15fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=3
[    0.000000] NUMA: node 2 [mem 0x00100000-0xdfffffff] overlaps with node 0 [mem 0x00100000-0xdfffffff]
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of physical nodes 2
[    0.000000] Node 0 MemBase 0000000000000000 Limit 0000000120000000
[    0.000000] Node 1 MemBase 0000000120000000 Limit 0000000160000000
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
[    0.000000]   NODE_DATA [mem 0x11fffb000-0x11fffffff]
[    0.000000] Initmem setup node 1 [mem 0x120000000-0x15fffffff]
[    0.000000]   NODE_DATA [mem 0x15fff9000-0x15fffdfff]
[    0.000000] [ffffea0003f00000-ffffea0003ffffff] potential offnode page_structs
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0
[    0.000000]  [ffffea0004000000-ffffea0004dfffff] PMD -> [ffff88015e600000-ffff88015f3fffff] on node 1
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x15fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xdffa8fff]
[    0.000000]   node   0: [mem 0x100000000-0x11fffffff]
[    0.000000]   node   1: [mem 0x120000000-0x15fffffff]
[    0.000000] On node 0 totalpages: 1048391
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12487 pages used for memmap
[    0.000000]   DMA32 zone: 913321 pages, LIFO batch:31
[    0.000000]   Normal zone: 1792 pages used for memmap
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] On node 1 totalpages: 262144
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdffa9000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xffffffff]
[    0.000000] e820: [mem 0xf0000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 
[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1292595
[    0.000000] Policy zone: Normal
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xf5fa000000-0xf5fbffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
[    0.000000] Memory: 5015500K/5242140K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 226640K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1909.777 MHz processor
[    0.000161] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.55 BogoMIPS (lpj=7639108)
[    0.010954] pid_max: default: 32768 minimum: 301
[    0.015677] ACPI: Core revision 20140424
[    0.022063] ACPI: All ACPI Tables successfully acquired
[    0.027576] Security Framework initialized
[    0.031754] AppArmor: AppArmor disabled by boot time parameter
[    0.037663] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.045477] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.058793] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.068671] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.075716] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.083676] Initializing cgroup subsys memory
[    0.088141] Initializing cgroup subsys devices
[    0.092684] Initializing cgroup subsys freezer
[    0.097209] Initializing cgroup subsys net_cls
[    0.101743] Initializing cgroup subsys blkio
[    0.106109] Initializing cgroup subsys perf_event
[    0.110904] Initializing cgroup subsys net_prio
[    0.115562] tseg: 0000000000
[    0.115576] CPU: Physical Processor ID: 0
[    0.119695] CPU: Processor Core ID: 0
[    0.124474] mce: CPU supports 6 MCE banks
[    0.128592] LVT offset 0 assigned for vector 0xf9
[    0.133393] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.148872] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
[    0.158011] ftrace: allocating 21601 entries in 85 pages
[    0.173497] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.219136] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
[    0.336304] Performance Events: AMD PMU driver.
[    0.341027] ... version:                0
[    0.345103] ... bit width:              48
[    0.349278] ... generic registers:      4
[    0.353369] ... value mask:             0000ffffffffffff
[    0.358753] ... max period:             00007fffffffffff
[    0.364133] ... fixed-purpose events:   0
[    0.368209] ... event mask:             000000000000000f
[    0.376198] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.384547] x86: Booting SMP configuration:
[    0.388822] .... node  #0, CPUs:      #1 #2 #3
[    0.433398] .... node  #1, CPUs:   #4 #5 #6 #7
[    0.585063] x86: Booted up 2 nodes, 8 CPUs
[    0.589493] smpboot: Total of 8 processors activated (30557.46 BogoMIPS)
[    0.602148] devtmpfs: initialized
[    0.614171] pinctrl core: initialized pinctrl subsystem
[    0.619648] NET: Registered protocol family 16
[    0.624391] cpuidle: using governor ladder
[    0.628566] cpuidle: using governor menu
[    0.632566] node 0 link 1: io port [1000, 3fff]
[    0.632570] TOM: 00000000e0000000 aka 3584M
[    0.636829] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.636833] node 0 link 1: mmio [fc000000, fc3fffff]
[    0.636836] node 0 link 1: mmio [f8000000, fbffffff]
[    0.636839] TOM2: 0000000160000000 aka 5632M
[    0.641180] bus: [bus 00-05] on node 0 link 1
[    0.641182] bus: 00 [io  0x0000-0xffff]
[    0.641184] bus: 00 [mem 0xf0000000-0xffffffff]
[    0.641185] bus: 00 [mem 0x160000000-0xfcffffffff]
[    0.641292] ACPI: bus type PCI registered
[    0.645380] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.652062] PCI: Using configuration type 1 for base access
[    0.657710] PCI: Using configuration type 1 for extended access
[    0.664336] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.670696] mtrr: probably your BIOS does not setup all CPUs.
[    0.676521] mtrr: corrected configuration.
[    0.693210] ACPI: Added _OSI(Module Device)
[    0.697508] ACPI: Added _OSI(Processor Device)
[    0.702032] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.706815] ACPI: Added _OSI(Processor Aggregator Device)
[    0.715697] ACPI: Interpreter enabled
[    0.719449] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.728934] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[    0.738372] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[    0.747824] ACPI: (supports S0 S1 S5)
[    0.751559] ACPI: Using IOAPIC for interrupt routing
[    0.756652] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.785101] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[    0.791366] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.799680] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.837148] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.847280] PCI host bridge to bus 0000:00
[    0.851454] pci_bus 0000:00: root bus resource [bus 00-05]
[    0.857006] pci_bus 0000:00: root bus resource [io  0x0d00-0x3fff]
[    0.863266] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[    0.870218] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
[    0.877173] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.883462] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.883653] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[    0.883661] pci 0000:00:01.0: reg 0x10: [io  0x2c00-0x2c7f]
[    0.883789] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.883797] pci 0000:00:01.1: reg 0x10: [io  0x3000-0x301f]
[    0.883821] pci 0000:00:01.1: reg 0x20: [io  0x2c80-0x2cbf]
[    0.883830] pci 0000:00:01.1: reg 0x24: [io  0x2cc0-0x2cff]
[    0.883872] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.883975] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.883991] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
[    0.884017] pci 0000:00:02.0: supports D1 D2
[    0.884029] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.884077] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.889868] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.889881] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
[    0.889922] pci 0000:00:02.1: supports D1 D2
[    0.889942] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.890013] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.895826] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.895853] pci 0000:00:06.0: reg 0x20: [io  0x3020-0x302f]
[    0.895881] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.903105] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.909722] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.916950] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.923674] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.923686] pci 0000:00:07.0: reg 0x10: [io  0x3050-0x3057]
[    0.923691] pci 0000:00:07.0: reg 0x14: [io  0x3070-0x3073]
[    0.923695] pci 0000:00:07.0: reg 0x18: [io  0x3058-0x305f]
[    0.923700] pci 0000:00:07.0: reg 0x1c: [io  0x3074-0x3077]
[    0.923704] pci 0000:00:07.0: reg 0x20: [io  0x3030-0x303f]
[    0.923709] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
[    0.923898] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.923908] pci 0000:00:08.0: reg 0x10: [io  0x3060-0x3067]
[    0.923912] pci 0000:00:08.0: reg 0x14: [io  0x3078-0x307b]
[    0.923917] pci 0000:00:08.0: reg 0x18: [io  0x3068-0x306f]
[    0.923921] pci 0000:00:08.0: reg 0x1c: [io  0x307c-0x307f]
[    0.923926] pci 0000:00:08.0: reg 0x20: [io  0x3040-0x304f]
[    0.923931] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
[    0.924104] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[    0.924196] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.929989] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.930038] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.930087] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.935881] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.935936] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.935992] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.941804] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.941853] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.941905] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.947707] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.947756] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.947813] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.953635] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.953840] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.953948] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.954063] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.954201] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.954324] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[    0.954452] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[    0.954599] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[    0.954730] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[    0.954872] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[    0.955055] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[    0.955074] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.955083] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
[    0.955090] pci 0000:01:04.0: reg 0x18: [io  0x1000-0x107f]
[    0.955137] pci 0000:01:04.0: supports D1 D2
[    0.955229] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.960273] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    0.960276] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.960279] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    0.960398] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[    0.960438] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
[    0.960474] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref]
[    0.960565] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.960645] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.970773] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.975823] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.975933] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[    0.975967] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
[    0.976069] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.976151] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.986280] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.991333] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    0.991417] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.996539] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.001625] pci_bus 0000:00: on NUMA node 0
[    1.001733] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    1.008170] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    1.014571] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    1.022235] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    1.029896] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    1.037566] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[    1.045224] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    1.051648] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[    1.058056] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[    1.065739] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    1.073417] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    1.081075] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[    1.087507] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[    1.093930] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[    1.101585] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[    1.109238] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[    1.116907] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.126019] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[    1.132739] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[    1.139476] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[    1.146177] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[    1.153192] ACPI: Enabled 1 GPEs in block 00 to 1F
[    1.158450] vgaarb: setting as boot device: PCI:0000:01:04.0
[    1.164237] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[    1.172436] vgaarb: loaded
[    1.175219] vgaarb: bridge control possible 0000:01:04.0
[    1.180783] PCI: Using ACPI for IRQ routing
[    1.185063] PCI: pci_cache_line_size set to 64 bytes
[    1.185120] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.185123] e820: reserve RAM buffer [mem 0xdffa9000-0xdfffffff]
[    1.185439] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.192572] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    1.197848] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    1.206580] Switched to clocksource hpet
[    1.222127] pnp: PnP ACPI init
[    1.225351] ACPI: bus type PNP registered
[    1.229984] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.230063] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.230162] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.230241] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.230281] pnp 00:04: [dma 2]
[    1.230323] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.230345] pnp: PnP ACPI: found 5 devices
[    1.234531] ACPI: bus type PNP unregistered
[    1.246607] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window
[    1.256676] pci 0000:00:09.0: PCI bridge to [bus 01]
[    1.261728] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    1.267906] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    1.274780] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    1.282113] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
[    1.289477] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.294527] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    1.301404] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    1.306448] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    1.313325] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    1.318388] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.323440] pci_bus 0000:00: resource 4 [io  0x0d00-0x3fff]
[    1.323443] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
[    1.323446] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
[    1.323449] pci_bus 0000:00: resource 7 [io  0x0000-0x0cf7]
[    1.323452] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    1.323454] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[    1.323457] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[    1.323460] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
[    1.323463] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
[    1.323606] NET: Registered protocol family 2
[    1.328565] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.336353] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.343771] TCP: Hash tables configured (established 65536 bind 65536)
[    1.350463] TCP: reno registered
[    1.353789] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.360066] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.366927] NET: Registered protocol family 1
[    1.371762] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    1.377957] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.383935] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.389551] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.395145] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    1.400801] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.406427] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.412003] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    1.417661] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.423258] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.428842] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    1.434495] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.440096] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.445685] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    1.451327] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.456925] pci 0000:01:04.0: Video device with shadowed ROM
[    1.456933] PCI: CLS 64 bytes, default 64
[    1.457042] Unpacking initramfs...
[    1.689959] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
[    1.697955] PCI-DMA: Disabling AGP.
[    1.703164] PCI-DMA: aperture base @ d4000000 size 65536 KB
[    1.708857] PCI-DMA: using GART IOMMU.
[    1.712692] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.724825] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.733170] microcode: CPU0: patch_level=0x01000096
[    1.738171] microcode: CPU1: patch_level=0x01000096
[    1.743186] microcode: CPU2: patch_level=0x01000096
[    1.748189] microcode: CPU3: patch_level=0x01000096
[    1.753204] microcode: CPU4: patch_level=0x01000096
[    1.758195] microcode: CPU5: patch_level=0x01000096
[    1.763191] microcode: CPU6: patch_level=0x01000096
[    1.769291] microcode: CPU7: patch_level=0x01000096
[    1.774396] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.783304] LVT offset 1 assigned for vector 0x400
[    1.788195] IBS: LVT offset 1 assigned
[    1.792063] perf: AMD IBS detected (0x00000007)
[    1.797287] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.803784] audit: initializing netlink subsys (disabled)
[    1.809295] audit: type=2000 audit(1427938821.616:1): initialized
[    1.816207] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.822709] zbud: loaded
[    1.825673] VFS: Disk quotas dquot_6.5.2
[    1.829729] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.836364] msgmni has been set to 9941
[    1.840833] alg: No test for stdrng (krng)
[    1.845129] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.852775] io scheduler noop registered
[    1.856809] io scheduler deadline registered
[    1.861255] io scheduler cfq registered (default)
[    1.866252] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[    1.866387] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[    1.866520] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[    1.866641] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[    1.866803] aer 0000:00:0b.0:pcie02: service driver aer loaded
[    1.866831] aer 0000:00:0c.0:pcie02: service driver aer loaded
[    1.866856] aer 0000:00:0d.0:pcie02: service driver aer loaded
[    1.866881] aer 0000:00:0e.0:pcie02: service driver aer loaded
[    1.866902] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    1.874001] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.880617] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    1.880628] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    1.887679] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.894289] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    1.894300] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[    1.901343] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[    1.901355] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[    1.908395] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[    1.908424] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.914104] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.920930] GHES: HEST is not enabled!
[    1.924898] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.951690] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.979488] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.987541] Linux agpgart interface v0.103
[    1.991949] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[    2.002452] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.007573] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.012919] mousedev: PS/2 mouse device common for all mice
[    2.018703] rtc_cmos rtc_cmos: RTC can wake from S4
[    2.023917] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    2.030390] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    2.038346] ledtrig-cpu: registered to indicate activity on CPUs
[    2.044572] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.051111] AMD IOMMUv2 functionality not available on this system
[    2.057534] TCP: cubic registered
[    2.061074] NET: Registered protocol family 10
[    2.066028] mip6: Mobile IPv6
[    2.069104] NET: Registered protocol family 17
[    2.073722] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.082497] mpls_gso: MPLS GSO support
[    2.087206] registered taskstats version 1
[    2.092117] rtc_cmos rtc_cmos: setting system clock to 2015-04-02 01:40:23 UTC (1427938823)
[    2.100701] PM: Hibernation image not present or could not be loaded.
[    2.102538] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
[    2.110524] Write protecting the kernel read-only data: 8192k
[    2.119843] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
[    2.128584] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    2.148734] systemd-udevd[99]: starting version 215
[    2.154272] random: systemd-udevd urandom read with 3 bits of entropy available
[    2.177342] pps_core: LinuxPPS API ver. 1 registered
[    2.177385] ACPI: bus type USB registered
[    2.177441] usbcore: registered new interface driver usbfs
[    2.177462] usbcore: registered new interface driver hub
[    2.177647] usbcore: registered new device driver usb
[    2.202615] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.212180] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.219119] PTP clock support registered
[    2.223434] ehci-pci: EHCI PCI platform driver
[    2.228250] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.228353] ehci-pci 0000:00:02.1: EHCI Host Controller
[    2.228366] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    2.228388] ehci-pci 0000:00:02.1: debug port 1
[    2.228434] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    2.228461] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
[    2.238256] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.238346] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.238348] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.238350] usb usb1: Product: EHCI Host Controller
[    2.238351] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.238352] usb usb1: SerialNumber: 0000:00:02.1
[    2.238683] hub 1-0:1.0: USB hub found
[    2.238694] hub 1-0:1.0: 10 ports detected
[    2.301841] tg3.c:v3.137 (May 11, 2014)
[    2.305891] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[    2.311870] ohci-pci: OHCI PCI platform driver
[    2.311929] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[    2.322435] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    2.328170] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.335743] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
[    2.377351] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[    2.387765] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.396264] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.396266] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.396268] usb usb2: Product: OHCI PCI host controller
[    2.396269] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.396270] usb usb2: SerialNumber: 0000:00:02.0
[    2.396482] hub 2-0:1.0: USB hub found
[    2.396493] hub 2-0:1.0: 10 ports detected
[    2.435924] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.443903] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.450839] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[    2.456741] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[    2.518653] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[    2.529084] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.538940] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.546876] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.560006] FS-Cache: Loaded
[    2.567179] RPC: Registered named UNIX socket transport module.
[    2.573869] RPC: Registered udp transport module.
[    2.579944] RPC: Registered tcp transport module.
[    2.586013] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.598566] FS-Cache: Netfs 'nfs' registered for caching
[    2.612250] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[    2.658206] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    2.722078] tsc: Refined TSC clocksource calibration: 1909.786 MHz
[    3.725815] Switched to clocksource tsc
[    4.250442] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
[    4.257131] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[    4.264129] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    6.136122] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    6.150260] systemd[1]: Detected architecture 'x86-64'.
[    6.348088] random: nonblocking pool is initialized
[    6.366334] systemd[1]: Inserted module 'autofs4'
[    6.373165] systemd[1]: Set hostname to <cb-test-tgt>.
[    6.705179] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[    6.718074] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    6.733464] systemd[1]: Expecting device dev-ttyS0.device...
[    6.748834] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    6.756836] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.764573] systemd[1]: Starting Remote File Systems (Pre).
[    6.780786] systemd[1]: Reached target Remote File Systems (Pre).
[    6.787140] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    6.808782] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.818439] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    6.826681] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.834758] systemd[1]: Starting Paths.
[    6.848697] systemd[1]: Reached target Paths.
[    6.853201] systemd[1]: Starting Encrypted Volumes.
[    6.868685] systemd[1]: Reached target Encrypted Volumes.
[    6.874228] systemd[1]: Starting Swap.
[    6.888661] systemd[1]: Reached target Swap.
[    6.893054] systemd[1]: Starting Root Slice.
[    6.916698] systemd[1]: Created slice Root Slice.
[    6.921591] systemd[1]: Starting User and Session Slice.
[    6.936643] systemd[1]: Created slice User and Session Slice.
[    6.942520] systemd[1]: Starting Delayed Shutdown Socket.
[    6.956680] systemd[1]: Listening on Delayed Shutdown Socket.
[    6.962600] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    6.980650] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.987753] systemd[1]: Starting Journal Socket (/dev/log).
[    7.004671] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.010719] systemd[1]: Starting Syslog Socket.
[    7.024619] systemd[1]: Listening on Syslog Socket.
[    7.030731] systemd[1]: Starting udev Kernel Socket.
[    7.044632] systemd[1]: Listening on udev Kernel Socket.
[    7.050081] systemd[1]: Starting udev Control Socket.
[    7.064609] systemd[1]: Listening on udev Control Socket.
[    7.070169] systemd[1]: Starting Journal Socket.
[    7.084617] systemd[1]: Listening on Journal Socket.
[    7.089737] systemd[1]: Starting Sockets.
[    7.104615] systemd[1]: Reached target Sockets.
[    7.109459] systemd[1]: Starting System Slice.
[    7.124582] systemd[1]: Created slice System Slice.
[    7.129601] systemd[1]: Starting system-getty.slice.
[    7.144588] systemd[1]: Created slice system-getty.slice.
[    7.150209] systemd[1]: Starting system-serial\x2dgetty.slice.
[    7.168584] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    7.175693] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.197750] systemd[1]: Mounting Debug File System...
[    7.226336] systemd[1]: Started Set Up Additional Binary Formats.
[    7.232598] systemd[1]: Mounting Huge Pages File System...
[    7.283034] systemd[1]: Starting Load Kernel Modules...
[    7.297455] systemd[1]: Mounting POSIX Message Queue File System...
[    7.314339] systemd[1]: Starting udev Coldplug all Devices...
[    7.330428] systemd[1]: Starting Journal Service...
[    7.356595] systemd[1]: Started Journal Service.
[    7.799556] systemd-udevd[186]: starting version 215
[    8.088076] systemd-journald[167]: Received request to flush runtime journal from PID 1
[    8.742582] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[    8.750605] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[    8.760421] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    8.768933] ACPI: Power Button [PWRB]
[    8.772869] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    8.772992] EDAC MC: Ver: 3.0.0
[    8.783770] ACPI: Power Button [PWRF]
[    8.807922] FDC 0 is a post-1991 82077
[    8.816902] SCSI subsystem initialized
[    8.877879] MCE: In-kernel MCE decoding enabled.
[    8.928026] w83793 0-002f: Registered watchdog chardev major 10, minor: 130
[    8.935158] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[    9.089802] libata version 3.00 loaded.
[    9.093177] acpi-cpufreq: overriding BIOS provided _PSD data
[    9.099339] AMD64 EDAC driver v3.4.0
[    9.103491] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    9.387957] kvm: Nested Virtualization enabled
[    9.392539] kvm: Nested Paging enabled
[   12.182810] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[   12.188539] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.195524] EDAC amd64: DRAM ECC enabled.
[   12.199704] EDAC amd64: F10h detected (node 0).
[   12.204576] EDAC MC: DCT0 chip selects:
[   12.204580] EDAC amd64: MC: 0:     0MB 1:     0MB
[   12.209358] EDAC amd64: MC: 2:     0MB 3:     0MB
[   12.214131] EDAC amd64: MC: 4:     0MB 5:     0MB
[   12.218908] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   12.223678] EDAC MC: DCT1 chip selects:
[   12.223681] EDAC amd64: MC: 0:     0MB 1:     0MB
[   12.228464] EDAC amd64: MC: 2:     0MB 3:     0MB
[   12.233255] EDAC amd64: MC: 4:     0MB 5:     0MB
[   12.238042] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   12.242833] EDAC amd64: using x4 syndromes.
[   12.247110] EDAC amd64: MCT channel count: 2
[   12.251532] EDAC amd64: CS6: Registered DDR2 RAM
[   12.256240] EDAC amd64: CS7: Registered DDR2 RAM
[   12.261389] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[   12.271294] sata_nv 0000:00:07.0: version 3.5
[   12.271703] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[   12.278298] scsi0 : sata_nv
[   12.281581] scsi1 : sata_nv
[   12.284605] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[   12.291829] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[   12.299417] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[   12.305816] scsi2 : sata_nv
[   12.308956] scsi3 : sata_nv
[   12.312076] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[   12.319350] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[   12.326660] pata_amd 0000:00:06.0: version 0.4.1
[   12.327520] scsi4 : pata_amd
[   12.330785] scsi5 : pata_amd
[   12.333985] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[   12.341071] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[   12.348254] EDAC amd64: DRAM ECC enabled.
[   12.352435] EDAC amd64: F10h detected (node 1).
[   12.357115] EDAC MC: DCT0 chip selects:
[   12.357119] EDAC amd64: MC: 0:  1024MB 1:     0MB
[   12.361925] EDAC amd64: MC: 2:     0MB 3:     0MB
[   12.366739] EDAC amd64: MC: 4:     0MB 5:     0MB
[   12.371543] EDAC amd64: MC: 6:     0MB 7:     0MB
[   12.376355] EDAC MC: DCT1 chip selects:
[   12.376358] EDAC amd64: MC: 0:     0MB 1:     0MB
[   12.381159] EDAC amd64: MC: 2:     0MB 3:     0MB
[   12.385968] EDAC amd64: MC: 4:     0MB 5:     0MB
[   12.390758] EDAC amd64: MC: 6:     0MB 7:     0MB
[   12.395558] EDAC amd64: using x4 syndromes.
[   12.399837] EDAC amd64: MCT channel count: 1
[   12.404290] EDAC amd64: CS0: Registered DDR2 RAM
[   12.409343] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
[   12.419254] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[   12.610661] ata1: SATA link down (SStatus 0 SControl 300)
[   12.638652] ata3: SATA link down (SStatus 0 SControl 300)
[   12.926549] ata2: SATA link down (SStatus 0 SControl 300)
[   13.242434] ata4: SATA link down (SStatus 0 SControl 300)