lenovo/x200/4.12/2020-05-12T10_30_22Z
diff --git a/lenovo/x200/4.12/2020-05-12T10_30_22Z/cbfs.txt b/lenovo/x200/4.12/2020-05-12T10_30_22Z/cbfs.txt
new file mode 100644
index 0000000..adb7420
--- /dev/null
+++ b/lenovo/x200/4.12/2020-05-12T10_30_22Z/cbfs.txt
@@ -0,0 +1,20 @@
+FMAP REGION: COREBOOT
+Name                           Offset     Type           Size   Comp
+cbfs master header             0x0        cbfs header        32 none
+fallback/romstage              0x80       stage           54132 none
+cpu_microcode_blob.bin         0xd480     microcode       49152 none
+fallback/ramstage              0x19500    stage          101953 none
+vgaroms/seavgabios.bin         0x32380    raw             28160 none
+config                         0x39200    raw               469 none
+revision                       0x39440    raw               658 none
+fallback/dsdt.aml              0x39740    raw             15128 none
+cmos_layout.bin                0x3d2c0    cmos_layout      1696 none
+fallback/postcar               0x3d9c0    stage           18040 none
+data_ccfl.vbt                  0x42080    raw              1501 LZMA (3854 decompressed)
+data_led.vbt                   0x426c0    raw              1439 LZMA (3863 decompressed)
+fallback/payload               0x42cc0    simple elf      68644 none
+payload_config                 0x53940    raw              1728 none
+payload_revision               0x54040    raw               237 none
+etc/ps2-keyboard-spinup        0x54180    raw                 8 none
+(empty)                        0x541c0    null          1686488 none
+bootblock                      0x1efdc0   bootblock       65536 none
diff --git a/lenovo/x200/4.12/2020-05-12T10_30_22Z/config.short.txt b/lenovo/x200/4.12/2020-05-12T10_30_22Z/config.short.txt
new file mode 100644
index 0000000..2abde71
--- /dev/null
+++ b/lenovo/x200/4.12/2020-05-12T10_30_22Z/config.short.txt
@@ -0,0 +1,15 @@
+# This image was built using coreboot 4.12
+# CONFIG_COLLECT_TIMESTAMPS is not set
+# CONFIG_USE_BLOBS is not set
+CONFIG_VENDOR_LENOVO=y
+CONFIG_NO_POST=y
+CONFIG_ONBOARD_VGA_IS_PRIMARY=y
+# CONFIG_DRIVERS_INTEL_WIFI is not set
+CONFIG_HAVE_IFD_BIN=y
+CONFIG_BOARD_LENOVO_X200=y
+CONFIG_HAVE_ME_BIN=y
+CONFIG_HAVE_GBE_BIN=y
+CONFIG_GENERIC_LINEAR_FRAMEBUFFER=y
+CONFIG_LINEAR_FRAMEBUFFER_MAX_WIDTH=1280
+CONFIG_LINEAR_FRAMEBUFFER_MAX_HEIGHT=800
+CONFIG_DEFAULT_CONSOLE_LOGLEVEL_6=y
diff --git a/lenovo/x200/4.12/2020-05-12T10_30_22Z/config.txt b/lenovo/x200/4.12/2020-05-12T10_30_22Z/config.txt
new file mode 100644
index 0000000..d76987e
--- /dev/null
+++ b/lenovo/x200/4.12/2020-05-12T10_30_22Z/config.txt
@@ -0,0 +1,728 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# coreboot configuration
+#
+
+#
+# General setup
+#
+CONFIG_COREBOOT_BUILD=y
+CONFIG_LOCALVERSION=""
+CONFIG_CBFS_PREFIX="fallback"
+CONFIG_COMPILER_GCC=y
+# CONFIG_COMPILER_LLVM_CLANG is not set
+# CONFIG_ANY_TOOLCHAIN is not set
+# CONFIG_CCACHE is not set
+# CONFIG_FMD_GENPARSER is not set
+# CONFIG_UTIL_GENPARSER is not set
+# CONFIG_USE_OPTION_TABLE is not set
+CONFIG_COMPRESS_RAMSTAGE=y
+CONFIG_INCLUDE_CONFIG_FILE=y
+# CONFIG_COLLECT_TIMESTAMPS is not set
+# CONFIG_USE_BLOBS is not set
+# CONFIG_COVERAGE is not set
+# CONFIG_UBSAN is not set
+CONFIG_RELOCATABLE_RAMSTAGE=y
+# CONFIG_NO_STAGE_CACHE is not set
+CONFIG_TSEG_STAGE_CACHE=y
+# CONFIG_UPDATE_IMAGE is not set
+# CONFIG_BOOTSPLASH_IMAGE is not set
+
+#
+# Mainboard
+#
+
+#
+# Important: Run 'make distclean' before switching boards
+#
+# CONFIG_VENDOR_51NB is not set
+# CONFIG_VENDOR_ADLINK is not set
+# CONFIG_VENDOR_AMD is not set
+# CONFIG_VENDOR_AOPEN is not set
+# CONFIG_VENDOR_APPLE is not set
+# CONFIG_VENDOR_ASROCK is not set
+# CONFIG_VENDOR_ASUS is not set
+# CONFIG_VENDOR_BAP is not set
+# CONFIG_VENDOR_BIOSTAR is not set
+# CONFIG_VENDOR_CAVIUM is not set
+# CONFIG_VENDOR_COMPULAB is not set
+# CONFIG_VENDOR_ELMEX is not set
+# CONFIG_VENDOR_EMULATION is not set
+# CONFIG_VENDOR_FACEBOOK is not set
+# CONFIG_VENDOR_FOXCONN is not set
+# CONFIG_VENDOR_GETAC is not set
+# CONFIG_VENDOR_GIGABYTE is not set
+# CONFIG_VENDOR_GIZMOSPHERE is not set
+# CONFIG_VENDOR_GOOGLE is not set
+# CONFIG_VENDOR_HP is not set
+# CONFIG_VENDOR_IBASE is not set
+# CONFIG_VENDOR_INTEL is not set
+# CONFIG_VENDOR_JETWAY is not set
+# CONFIG_VENDOR_KONTRON is not set
+CONFIG_VENDOR_LENOVO=y
+# CONFIG_VENDOR_LIBRETREND is not set
+# CONFIG_VENDOR_LIPPERT is not set
+# CONFIG_VENDOR_MSI is not set
+# CONFIG_VENDOR_OCP is not set
+# CONFIG_VENDOR_OPENCELLULAR is not set
+# CONFIG_VENDOR_PACKARDBELL is not set
+# CONFIG_VENDOR_PCENGINES is not set
+# CONFIG_VENDOR_PORTWELL is not set
+# CONFIG_VENDOR_PROTECTLI is not set
+# CONFIG_VENDOR_PURISM is not set
+# CONFIG_VENDOR_RAZER is not set
+# CONFIG_VENDOR_RODA is not set
+# CONFIG_VENDOR_SAMSUNG is not set
+# CONFIG_VENDOR_SAPPHIRE is not set
+# CONFIG_VENDOR_SCALEWAY is not set
+# CONFIG_VENDOR_SIEMENS is not set
+# CONFIG_VENDOR_SIFIVE is not set
+# CONFIG_VENDOR_SUPERMICRO is not set
+# CONFIG_VENDOR_SYSTEM76 is not set
+# CONFIG_VENDOR_TI is not set
+# CONFIG_VENDOR_UP is not set
+CONFIG_BOARD_SPECIFIC_OPTIONS=y
+CONFIG_MAINBOARD_FAMILY="ThinkPad X200"
+CONFIG_MAINBOARD_PART_NUMBER="ThinkPad X200"
+CONFIG_MAINBOARD_VERSION="1.0"
+CONFIG_MAINBOARD_DIR="lenovo/x200"
+CONFIG_MAX_CPUS=2
+CONFIG_VGA_BIOS_ID="8086,2a42"
+CONFIG_DIMM_MAX=4
+CONFIG_DIMM_SPD_SIZE=256
+CONFIG_FMDFILE=""
+CONFIG_NO_POST=y
+CONFIG_MAINBOARD_VENDOR="LENOVO"
+CONFIG_ONBOARD_VGA_IS_PRIMARY=y
+# CONFIG_VGA_BIOS is not set
+CONFIG_C_ENV_BOOTBLOCK_SIZE=0x10000
+CONFIG_MAINBOARD_SMBIOS_MANUFACTURER="LENOVO"
+CONFIG_VARIANT_DIR="x200"
+CONFIG_DEVICETREE="devicetree.cb"
+CONFIG_PRERAM_CBMEM_CONSOLE_SIZE=0xc00
+CONFIG_CBFS_SIZE=0x200000
+CONFIG_USBDEBUG_HCD_INDEX=2
+CONFIG_OVERRIDE_DEVICETREE="variants/$(CONFIG_VARIANT_DIR)/overridetree.cb"
+CONFIG_PAYLOAD_CONFIGFILE=""
+CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0
+# CONFIG_VBOOT is not set
+CONFIG_VBOOT_SLOTS_RW_A=y
+CONFIG_VBOOT_VBNV_OFFSET=0x82
+CONFIG_DCACHE_RAM_BASE=0xfefc0000
+CONFIG_DCACHE_RAM_SIZE=0x8000
+CONFIG_DCACHE_BSP_STACK_SIZE=0x2000
+CONFIG_MMCONF_BASE_ADDRESS=0xf0000000
+CONFIG_MAX_ACPI_TABLE_SIZE_KB=144
+CONFIG_HAVE_INTEL_FIRMWARE=y
+CONFIG_SPI_FLASH_INCLUDE_ALL_DRIVERS=y
+CONFIG_SPI_FLASH_WINBOND=y
+# CONFIG_DRIVERS_INTEL_WIFI is not set
+CONFIG_IFD_BIN_PATH="3rdparty/blobs/mainboard/$(MAINBOARDDIR)/descriptor.bin"
+CONFIG_ME_BIN_PATH="3rdparty/blobs/mainboard/$(MAINBOARDDIR)/me.bin"
+CONFIG_GBE_BIN_PATH="3rdparty/blobs/mainboard/$(MAINBOARDDIR)/gbe.bin"
+CONFIG_SEABIOS_HARDWARE_IRQ=y
+CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="ThinkPad X200"
+CONFIG_HAVE_IFD_BIN=y
+# CONFIG_BOARD_LENOVO_G505S is not set
+# CONFIG_BOARD_LENOVO_L520 is not set
+# CONFIG_BOARD_LENOVO_S230U is not set
+# CONFIG_BOARD_LENOVO_T400 is not set
+# CONFIG_BOARD_LENOVO_T500 is not set
+# CONFIG_BOARD_LENOVO_R400 is not set
+# CONFIG_BOARD_LENOVO_R500 is not set
+# CONFIG_BOARD_LENOVO_W500 is not set
+# CONFIG_BOARD_LENOVO_T410 is not set
+# CONFIG_BOARD_LENOVO_T420 is not set
+# CONFIG_BOARD_LENOVO_T420S is not set
+# CONFIG_BOARD_LENOVO_THINKPAD_T430 is not set
+# CONFIG_BOARD_LENOVO_T430S is not set
+# CONFIG_BOARD_LENOVO_T431S is not set
+# CONFIG_BOARD_LENOVO_THINKPAD_T440P is not set
+# CONFIG_BOARD_LENOVO_T520 is not set
+# CONFIG_BOARD_LENOVO_W520 is not set
+# CONFIG_BOARD_LENOVO_T530 is not set
+# CONFIG_BOARD_LENOVO_W530 is not set
+# CONFIG_BOARD_LENOVO_T60 is not set
+# CONFIG_BOARD_LENOVO_Z61T is not set
+# CONFIG_BOARD_LENOVO_R60 is not set
+# CONFIG_BOARD_LENOVO_THINKCENTRE_A58 is not set
+# CONFIG_BOARD_LENOVO_X131E is not set
+# CONFIG_BOARD_LENOVO_X1_CARBON_GEN1 is not set
+CONFIG_BOARD_LENOVO_X200=y
+# CONFIG_BOARD_LENOVO_X301 is not set
+# CONFIG_BOARD_LENOVO_X201 is not set
+# CONFIG_BOARD_LENOVO_X220 is not set
+# CONFIG_BOARD_LENOVO_X220I is not set
+# CONFIG_BOARD_LENOVO_X1 is not set
+# CONFIG_BOARD_LENOVO_X230 is not set
+# CONFIG_BOARD_LENOVO_X230T is not set
+# CONFIG_BOARD_LENOVO_X60 is not set
+CONFIG_PS2K_EISAID="LEN0010"
+CONFIG_PS2M_EISAID="IBM3780"
+CONFIG_DRIVER_LENOVO_SERIALS=y
+# CONFIG_BOARD_LENOVO_BASEBOARD_T520 is not set
+# CONFIG_BOARD_LENOVO_BASEBOARD_T530 is not set
+# CONFIG_DRIVERS_UART_8250IO is not set
+# CONFIG_PCIEXP_L1_SUB_STATE is not set
+CONFIG_SMBIOS_ENCLOSURE_TYPE=0x09
+CONFIG_HEAP_SIZE=0x4000
+CONFIG_SUBSYSTEM_VENDOR_ID=0x0000
+CONFIG_SUBSYSTEM_DEVICE_ID=0x0000
+CONFIG_BOARD_ROMSIZE_KB_8192=y
+# CONFIG_COREBOOT_ROMSIZE_KB_64 is not set
+# CONFIG_COREBOOT_ROMSIZE_KB_128 is not set
+# CONFIG_COREBOOT_ROMSIZE_KB_256 is not set
+# CONFIG_COREBOOT_ROMSIZE_KB_512 is not set
+# CONFIG_COREBOOT_ROMSIZE_KB_1024 is not set
+# CONFIG_COREBOOT_ROMSIZE_KB_2048 is not set
+# CONFIG_COREBOOT_ROMSIZE_KB_4096 is not set
+# CONFIG_COREBOOT_ROMSIZE_KB_5120 is not set
+# CONFIG_COREBOOT_ROMSIZE_KB_6144 is not set
+CONFIG_COREBOOT_ROMSIZE_KB_8192=y
+# CONFIG_COREBOOT_ROMSIZE_KB_10240 is not set
+# CONFIG_COREBOOT_ROMSIZE_KB_12288 is not set
+# CONFIG_COREBOOT_ROMSIZE_KB_16384 is not set
+# CONFIG_COREBOOT_ROMSIZE_KB_32768 is not set
+# CONFIG_COREBOOT_ROMSIZE_KB_65536 is not set
+CONFIG_COREBOOT_ROMSIZE_KB=8192
+CONFIG_ROM_SIZE=0x00800000
+CONFIG_HAVE_POWER_STATE_AFTER_FAILURE=y
+CONFIG_HAVE_POWER_STATE_PREVIOUS_AFTER_FAILURE=y
+CONFIG_POWER_STATE_OFF_AFTER_FAILURE=y
+# CONFIG_POWER_STATE_ON_AFTER_FAILURE is not set
+# CONFIG_POWER_STATE_PREVIOUS_AFTER_FAILURE is not set
+CONFIG_MAINBOARD_POWER_FAILURE_STATE=0
+CONFIG_SYSTEM_TYPE_LAPTOP=y
+# CONFIG_SYSTEM_TYPE_TABLET is not set
+# CONFIG_SYSTEM_TYPE_DETACHABLE is not set
+# CONFIG_SYSTEM_TYPE_CONVERTIBLE is not set
+# CONFIG_CBFS_AUTOGEN_ATTRIBUTES is not set
+
+#
+# Chipset
+#
+
+#
+# SoC
+#
+CONFIG_CPU_ADDR_BITS=36
+CONFIG_EHCI_BAR=0xfef00000
+CONFIG_SMM_RESERVED_SIZE=0x100000
+CONFIG_SMM_MODULE_STACK_SIZE=0x400
+CONFIG_ACPI_CPU_STRING="\\_SB.CP%02d"
+CONFIG_X86_RESET_VECTOR=0xfffffff0
+# CONFIG_SOC_CAVIUM_CN81XX is not set
+CONFIG_ARCH_ARMV8_EXTENSION=0
+CONFIG_STACK_SIZE=0x1000
+# CONFIG_SOC_CAVIUM_COMMON is not set
+# CONFIG_SOC_INTEL_GLK is not set
+CONFIG_X86_TOP4G_BOOTMEDIA_MAP=y
+CONFIG_ROMSTAGE_ADDR=0x2000000
+CONFIG_VERSTAGE_ADDR=0x2000000
+# CONFIG_PCIEXP_ASPM is not set
+# CONFIG_PCIEXP_COMMON_CLOCK is not set
+# CONFIG_PCIEXP_CLK_PM is not set
+CONFIG_UART_PCI_ADDR=0x0
+# CONFIG_SOC_MEDIATEK_MT8173 is not set
+# CONFIG_SOC_MEDIATEK_MT8183 is not set
+# CONFIG_SOC_NVIDIA_TEGRA124 is not set
+# CONFIG_SOC_NVIDIA_TEGRA210 is not set
+# CONFIG_SOC_QUALCOMM_COMMON is not set
+# CONFIG_SOC_QC_IPQ40XX is not set
+# CONFIG_SOC_QC_IPQ806X is not set
+# CONFIG_SOC_QUALCOMM_QCS405 is not set
+# CONFIG_SOC_QUALCOMM_SC7180 is not set
+# CONFIG_SOC_QUALCOMM_SDM845 is not set
+# CONFIG_SOC_ROCKCHIP_RK3288 is not set
+# CONFIG_SOC_ROCKCHIP_RK3399 is not set
+# CONFIG_CPU_SAMSUNG_EXYNOS5250 is not set
+# CONFIG_CPU_SAMSUNG_EXYNOS5420 is not set
+# CONFIG_SOC_UCB_RISCV is not set
+
+#
+# CPU
+#
+# CONFIG_CPU_AMD_AGESA is not set
+# CONFIG_CPU_AMD_PI is not set
+# CONFIG_CPU_ARMLTD_CORTEX_A9 is not set
+CONFIG_CPU_INTEL_MODEL_1067X=y
+CONFIG_CPU_INTEL_SOCKET_BGA956=y
+CONFIG_SSE2=y
+# CONFIG_CPU_INTEL_FIRMWARE_INTERFACE_TABLE is not set
+# CONFIG_CPU_INTEL_TURBO_NOT_PACKAGE_SCOPED is not set
+CONFIG_CPU_INTEL_COMMON=y
+CONFIG_ENABLE_VMX=y
+CONFIG_SET_IA32_FC_LOCK_BIT=y
+CONFIG_CPU_INTEL_COMMON_TIMEBASE=y
+CONFIG_CPU_INTEL_COMMON_SMM=y
+CONFIG_MICROCODE_UPDATE_PRE_RAM=y
+# CONFIG_CPU_TI_AM335X is not set
+# CONFIG_PARALLEL_CPU_INIT is not set
+CONFIG_PARALLEL_MP=y
+# CONFIG_PARALLEL_MP_AP_WORK is not set
+# CONFIG_UDELAY_LAPIC is not set
+CONFIG_UDELAY_TSC=y
+CONFIG_TSC_MONOTONIC_TIMER=y
+# CONFIG_TSC_SYNC_LFENCE is not set
+CONFIG_TSC_SYNC_MFENCE=y
+# CONFIG_NO_FIXED_XIP_ROM_SIZE is not set
+CONFIG_XIP_ROM_SIZE=0x10000
+CONFIG_SETUP_XIP_CACHE=y
+CONFIG_LOGICAL_CPUS=y
+CONFIG_HAVE_SMI_HANDLER=y
+# CONFIG_NO_SMM is not set
+# CONFIG_SMM_ASEG is not set
+CONFIG_SMM_TSEG=y
+CONFIG_SMM_MODULE_HEAP_SIZE=0x4000
+CONFIG_SMM_STUB_STACK_SIZE=0x400
+CONFIG_SMM_LAPIC_REMAP_MITIGATION=y
+# CONFIG_SERIALIZED_SMM_INITIALIZATION is not set
+# CONFIG_X86_AMD_FIXED_MTRRS is not set
+# CONFIG_X86_AMD_INIT_SIPI is not set
+# CONFIG_SOC_SETS_MSRS is not set
+CONFIG_SMP=y
+CONFIG_MMX=y
+CONFIG_SSE=y
+CONFIG_SUPPORT_CPU_UCODE_IN_CBFS=y
+# CONFIG_USES_MICROCODE_HEADER_FILES is not set
+CONFIG_USE_CPU_MICROCODE_CBFS_BINS=y
+CONFIG_CPU_MICROCODE_CBFS_DEFAULT_BINS=y
+# CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_BINS is not set
+# CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_HEADER is not set
+# CONFIG_CPU_MICROCODE_CBFS_NONE is not set
+
+#
+# Northbridge
+#
+# CONFIG_NORTHBRIDGE_AMD_AGESA is not set
+# CONFIG_NORTHBRIDGE_AMD_PI is not set
+CONFIG_NORTHBRIDGE_SPECIFIC_OPTIONS=y
+CONFIG_NORTHBRIDGE_INTEL_GM45=y
+CONFIG_INTEL_GMA_BCLV_OFFSET=0x61254
+CONFIG_INTEL_GMA_BCLM_OFFSET=0x61256
+
+#
+# Southbridge
+#
+# CONFIG_AMD_SB_CIMX is not set
+# CONFIG_SOUTHBRIDGE_AMD_CIMX_SB800 is not set
+CONFIG_HPET_MIN_TICKS=0x80
+CONFIG_SOUTHBRIDGE_INTEL_COMMON_RESET=y
+CONFIG_SOUTHBRIDGE_INTEL_COMMON_RTC=y
+CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMCLIB=y
+CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMBASE=y
+CONFIG_SOUTHBRIDGE_INTEL_COMMON_GPIO=y
+CONFIG_SOUTHBRIDGE_INTEL_COMMON_SMBUS=y
+CONFIG_SOUTHBRIDGE_INTEL_COMMON_SPI=y
+# CONFIG_SOUTHBRIDGE_INTEL_COMMON_SPI_ICH7 is not set
+CONFIG_SOUTHBRIDGE_INTEL_COMMON_SPI_ICH9=y
+# CONFIG_SOUTHBRIDGE_INTEL_COMMON_SPI_SILVERMONT is not set
+CONFIG_SOUTHBRIDGE_INTEL_COMMON_PIRQ_ACPI_GEN=y
+CONFIG_SOUTHBRIDGE_INTEL_COMMON_RCBA_PIRQ=y
+# CONFIG_HAVE_INTEL_CHIPSET_LOCKDOWN is not set
+CONFIG_SOUTHBRIDGE_INTEL_COMMON_SMM=y
+CONFIG_SOUTHBRIDGE_INTEL_COMMON_USB_DEBUG=y
+CONFIG_INTEL_DESCRIPTOR_MODE_CAPABLE=y
+CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED=y
+# CONFIG_VALIDATE_INTEL_DESCRIPTOR is not set
+CONFIG_SOUTHBRIDGE_INTEL_COMMON_WATCHDOG=y
+CONFIG_SOUTHBRIDGE_INTEL_I82801IX=y
+
+#
+# Super I/O
+#
+# CONFIG_SUPERIO_ASPEED_AST2400 is not set
+# CONFIG_SUPERIO_ASPEED_COMMON_PRE_RAM is not set
+# CONFIG_SUPERIO_ASPEED_HAS_UART_DELAY_WORKAROUND is not set
+# CONFIG_SUPERIO_FINTEK_FAN_CONTROL is not set
+CONFIG_SUPERIO_NSC_PC87382=y
+
+#
+# Embedded Controllers
+#
+CONFIG_EC_ACPI=y
+# CONFIG_EC_51NB_NPCE985LA0DX is not set
+# CONFIG_EC_GOOGLE_CHROMEEC_SKUID is not set
+# CONFIG_EC_GOOGLE_WILCO is not set
+CONFIG_EC_LENOVO_H8=y
+CONFIG_SEABIOS_PS2_TIMEOUT=5000
+CONFIG_H8_BEEP_ON_DEATH=y
+CONFIG_H8_FLASH_LEDS_ON_DEATH=y
+# CONFIG_H8_SUPPORT_BT_ON_WIFI is not set
+CONFIG_H8_HAS_BAT_TRESHOLDS_IMPL=y
+# CONFIG_H8_HAS_PRIMARY_FN_KEYS is not set
+CONFIG_EC_LENOVO_PMH7=y
+
+#
+# Intel Firmware
+#
+CONFIG_HAVE_ME_BIN=y
+CONFIG_MAINBOARD_USES_IFD_GBE_REGION=y
+CONFIG_HAVE_GBE_BIN=y
+# CONFIG_MAINBOARD_USES_IFD_EC_REGION is not set
+# CONFIG_DO_NOT_TOUCH_DESCRIPTOR_REGION is not set
+# CONFIG_LOCK_MANAGEMENT_ENGINE is not set
+CONFIG_UNLOCK_FLASH_REGIONS=y
+# CONFIG_CAVIUM_BDK is not set
+# CONFIG_MAINBOARD_HAS_CHROMEOS is not set
+# CONFIG_GOOGLE_SMBIOS_MAINBOARD_VERSION is not set
+# CONFIG_UEFI_2_4_BINDING is not set
+# CONFIG_UDK_2015_BINDING is not set
+# CONFIG_UDK_2017_BINDING is not set
+# CONFIG_USE_SIEMENS_HWILIB is not set
+# CONFIG_ARM_LPAE is not set
+CONFIG_ARCH_X86=y
+CONFIG_ARCH_BOOTBLOCK_X86_32=y
+CONFIG_ARCH_VERSTAGE_X86_32=y
+CONFIG_ARCH_ROMSTAGE_X86_32=y
+CONFIG_ARCH_POSTCAR_X86_32=y
+CONFIG_ARCH_RAMSTAGE_X86_32=y
+# CONFIG_ARCH_POSTCAR_X86_64 is not set
+# CONFIG_USE_MARCH_586 is not set
+# CONFIG_AP_IN_SIPI_WAIT is not set
+# CONFIG_SIPI_VECTOR_IN_ROM is not set
+CONFIG_RAMBASE=0xe00000
+CONFIG_RAMTOP=0x1000000
+CONFIG_NUM_IPI_STARTS=2
+# CONFIG_CBMEM_TOP_BACKUP is not set
+CONFIG_PC80_SYSTEM=y
+# CONFIG_BOOTBLOCK_DEBUG_SPINLOOP is not set
+CONFIG_HAVE_CMOS_DEFAULT=y
+CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default"
+CONFIG_IOAPIC_INTERRUPTS_ON_FSB=y
+# CONFIG_IOAPIC_INTERRUPTS_ON_APIC_SERIAL_BUS is not set
+# CONFIG_HPET_ADDRESS_OVERRIDE is not set
+CONFIG_HPET_ADDRESS=0xfed00000
+CONFIG_ID_SECTION_OFFSET=0x80
+CONFIG_POSTCAR_STAGE=y
+# CONFIG_VERSTAGE_DEBUG_SPINLOOP is not set
+# CONFIG_ROMSTAGE_DEBUG_SPINLOOP is not set
+CONFIG_BOOTBLOCK_SIMPLE=y
+# CONFIG_BOOTBLOCK_NORMAL is not set
+# CONFIG_PAGING_IN_CACHE_AS_RAM is not set
+# CONFIG_IDT_IN_EVERY_STAGE is not set
+CONFIG_HAVE_CF9_RESET=y
+# CONFIG_PIRQ_ROUTE is not set
+
+#
+# Devices
+#
+CONFIG_HAVE_VGA_TEXT_FRAMEBUFFER=y
+CONFIG_HAVE_LINEAR_FRAMEBUFFER=y
+# CONFIG_MAINBOARD_HAS_NATIVE_VGA_INIT is not set
+# CONFIG_MAINBOARD_FORCE_NATIVE_VGA_INIT is not set
+CONFIG_MAINBOARD_HAS_LIBGFXINIT=y
+CONFIG_MAINBOARD_USE_LIBGFXINIT=y
+# CONFIG_VGA_ROM_RUN is not set
+# CONFIG_NO_GFX_INIT is not set
+# CONFIG_MULTIPLE_VGA_ADAPTERS is not set
+
+#
+# Display
+#
+# CONFIG_VGA_TEXT_FRAMEBUFFER is not set
+CONFIG_GENERIC_LINEAR_FRAMEBUFFER=y
+CONFIG_LINEAR_FRAMEBUFFER=y
+# CONFIG_BOOTSPLASH is not set
+CONFIG_LINEAR_FRAMEBUFFER_MAX_WIDTH=1280
+CONFIG_LINEAR_FRAMEBUFFER_MAX_HEIGHT=800
+CONFIG_PCI=y
+# CONFIG_NO_MMCONF_SUPPORT is not set
+CONFIG_MMCONF_SUPPORT=y
+# CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT is not set
+CONFIG_HT_CHAIN_UNITID_BASE=0
+CONFIG_HT_CHAIN_END_UNITID_BASE=0
+CONFIG_PCIX_PLUGIN_SUPPORT=y
+CONFIG_CARDBUS_PLUGIN_SUPPORT=y
+# CONFIG_AZALIA_PLUGIN_SUPPORT is not set
+CONFIG_PCIEXP_PLUGIN_SUPPORT=y
+# CONFIG_PCIEXP_HOTPLUG is not set
+# CONFIG_EARLY_PCI_BRIDGE is not set
+# CONFIG_CHECK_REV_IN_OPROM_NAME is not set
+# CONFIG_INTEL_GMA_ADD_VBT is not set
+# CONFIG_SOFTWARE_I2C is not set
+
+#
+# Generic Drivers
+#
+# CONFIG_DRIVERS_AS3722_RTC is not set
+CONFIG_CRB_TPM_BASE_ADDRESS=0xfed40000
+# CONFIG_MAINBOARD_HAS_CRB_TPM is not set
+# CONFIG_ELOG is not set
+# CONFIG_GIC is not set
+# CONFIG_IPMI_KCS is not set
+CONFIG_DRIVERS_LENOVO_WACOM=y
+CONFIG_DIGITIZER_AUTODETECT=y
+# CONFIG_DIGITIZER_PRESENT is not set
+# CONFIG_DIGITIZER_ABSENT is not set
+# CONFIG_RT8168_GET_MAC_FROM_VPD is not set
+# CONFIG_RT8168_SUPPORT_LEGACY_VPD_MAC is not set
+# CONFIG_RT8168_SET_LED_MODE is not set
+# CONFIG_SMMSTORE is not set
+# CONFIG_SMMSTORE_IN_CBFS is not set
+CONFIG_SPI_FLASH=y
+# CONFIG_SPI_SDCARD is not set
+CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y
+# CONFIG_BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY is not set
+# CONFIG_SPI_FLASH_DONT_INCLUDE_ALL_DRIVERS is not set
+# CONFIG_SPI_FLASH_NO_FAST_READ is not set
+CONFIG_SPI_FLASH_ADESTO=y
+CONFIG_SPI_FLASH_AMIC=y
+CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_SPI_FLASH_EON=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_SPI_FLASH_STMICRO=y
+# CONFIG_SPI_FLASH_HAS_VOLATILE_GROUP is not set
+# CONFIG_HAVE_SPI_CONSOLE_SUPPORT is not set
+CONFIG_NO_UART_ON_SUPERIO=y
+# CONFIG_UART_OVERRIDE_INPUT_CLOCK_DIVIDER is not set
+# CONFIG_UART_OVERRIDE_REFCLK is not set
+# CONFIG_DRIVERS_UART_8250MEM is not set
+# CONFIG_DRIVERS_UART_8250MEM_32 is not set
+# CONFIG_HAVE_UART_SPECIAL is not set
+# CONFIG_DRIVERS_UART_OXPCIE is not set
+# CONFIG_DRIVERS_UART_PL011 is not set
+# CONFIG_UART_USE_REFCLK_AS_INPUT_CLOCK is not set
+CONFIG_HAVE_USBDEBUG=y
+CONFIG_HAVE_USBDEBUG_OPTIONS=y
+# CONFIG_USBDEBUG is not set
+# CONFIG_VPD is not set
+# CONFIG_DRIVERS_GENERIC_WIFI is not set
+# CONFIG_DRIVERS_AMD_PI is not set
+# CONFIG_DRIVERS_GENERIC_CBFS_SERIAL is not set
+CONFIG_DRIVERS_GENERIC_IOAPIC=y
+# CONFIG_DRIVERS_GFX_GENERIC is not set
+# CONFIG_DRIVERS_I2C_MAX98373 is not set
+# CONFIG_DRIVERS_I2C_MAX98390 is not set
+# CONFIG_DRIVERS_I2C_MAX98927 is not set
+# CONFIG_DRIVERS_I2C_PCA9538 is not set
+# CONFIG_DRIVERS_I2C_PCF8523 is not set
+# CONFIG_DRIVERS_I2C_PTN3460 is not set
+# CONFIG_DRIVERS_I2C_RT1011 is not set
+# CONFIG_DRIVERS_I2C_RT5663 is not set
+# CONFIG_DRIVERS_I2C_RTD2132 is not set
+# CONFIG_DRIVERS_I2C_RX6110SA is not set
+# CONFIG_DRIVERS_I2C_SX9310 is not set
+# CONFIG_MAINBOARD_HAS_I2C_TPM_ATMEL is not set
+# CONFIG_MAINBOARD_HAS_I2C_TPM_CR50 is not set
+# CONFIG_MAINBOARD_HAS_I2C_TPM_GENERIC is not set
+# CONFIG_PLATFORM_USES_FSP2_0 is not set
+# CONFIG_PLATFORM_USES_FSP2_1 is not set
+# CONFIG_INTEL_DDI is not set
+CONFIG_INTEL_EDID=y
+CONFIG_INTEL_INT15=y
+CONFIG_INTEL_GMA_ACPI=y
+CONFIG_INTEL_GMA_BCLV_WIDTH=16
+CONFIG_INTEL_GMA_BCLM_WIDTH=16
+CONFIG_INTEL_GMA_SSC_ALTERNATE_REF=y
+# CONFIG_INTEL_GMA_SWSMISCI is not set
+CONFIG_GFX_GMA=y
+# CONFIG_GFX_GMA_PANEL_1_ON_EDP is not set
+CONFIG_GFX_GMA_PANEL_1_ON_LVDS=y
+CONFIG_GFX_GMA_DYN_CPU=y
+CONFIG_GFX_GMA_GENERATION="G45"
+CONFIG_GFX_GMA_PANEL_1_PORT="LVDS"
+CONFIG_GFX_GMA_PANEL_2_PORT="Disabled"
+CONFIG_GFX_GMA_ANALOG_I2C_PORT="PCH_DAC"
+# CONFIG_DRIVER_INTEL_I210 is not set
+# CONFIG_DRIVERS_INTEL_ISH is not set
+# CONFIG_DRIVERS_INTEL_MIPI_CAMERA is not set
+# CONFIG_HAVE_INTEL_PTT is not set
+# CONFIG_DRIVERS_LENOVO_HYBRID_GRAPHICS is not set
+# CONFIG_DRIVER_MAXIM_MAX77686 is not set
+# CONFIG_DRIVER_PARADE_PS8625 is not set
+# CONFIG_DRIVER_PARADE_PS8640 is not set
+# CONFIG_DRIVERS_PS2_KEYBOARD is not set
+CONFIG_DRIVERS_MC146818=y
+# CONFIG_LPC_TPM is not set
+# CONFIG_MAINBOARD_HAS_LPC_TPM is not set
+CONFIG_VGA=y
+# CONFIG_DRIVERS_RICOH_RCE822 is not set
+# CONFIG_DRIVER_SIEMENS_NC_FPGA is not set
+# CONFIG_NC_FPGA_NOTIFY_CB_READY is not set
+# CONFIG_DRIVERS_SIL_3114 is not set
+# CONFIG_MAINBOARD_HAS_SPI_TPM_CR50 is not set
+# CONFIG_MAINBOARD_HAS_SPI_TPM is not set
+# CONFIG_DRIVER_TI_TPS65090 is not set
+# CONFIG_DRIVERS_TI_TPS65913_RTC is not set
+# CONFIG_DRIVERS_USB_ACPI is not set
+# CONFIG_COMMONLIB_STORAGE is not set
+
+#
+# Security
+#
+
+#
+# Verified Boot (vboot)
+#
+
+#
+# Trusted Platform Module
+#
+CONFIG_USER_NO_TPM=y
+
+#
+# Memory initialization
+#
+CONFIG_PLATFORM_HAS_DRAM_CLEAR=y
+# CONFIG_SECURITY_CLEAR_DRAM_ON_REGULAR_BOOT is not set
+# CONFIG_STM is not set
+CONFIG_BOOTMEDIA_LOCK_NONE=y
+# CONFIG_BOOTMEDIA_LOCK_CONTROLLER is not set
+# CONFIG_BOOTMEDIA_LOCK_CHIP is not set
+# CONFIG_ACPI_AMD_HARDWARE_SLEEP_VALUES is not set
+CONFIG_ACPI_HAVE_PCAT_8259=y
+CONFIG_ACPI_INTEL_HARDWARE_SLEEP_VALUES=y
+CONFIG_HAVE_ACPI_TABLES=y
+# CONFIG_BOOT_DEVICE_NOT_SPI_FLASH is not set
+CONFIG_BOOT_DEVICE_SPI_FLASH=y
+CONFIG_BOOT_DEVICE_MEMORY_MAPPED=y
+CONFIG_BOOT_DEVICE_SUPPORTS_WRITES=y
+# CONFIG_RTC is not set
+
+#
+# Console
+#
+CONFIG_BOOTBLOCK_CONSOLE=y
+CONFIG_POSTCAR_CONSOLE=y
+CONFIG_SQUELCH_EARLY_SMP=y
+# CONFIG_SPKMODEM is not set
+# CONFIG_CONSOLE_NE2K is not set
+CONFIG_CONSOLE_CBMEM=y
+CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
+# CONFIG_CONSOLE_CBMEM_DUMP_TO_UART is not set
+# CONFIG_CONSOLE_SPI_FLASH is not set
+# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_8 is not set
+# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_7 is not set
+CONFIG_DEFAULT_CONSOLE_LOGLEVEL_6=y
+# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_5 is not set
+# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_4 is not set
+# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_3 is not set
+# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_2 is not set
+# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_1 is not set
+# CONFIG_DEFAULT_CONSOLE_LOGLEVEL_0 is not set
+CONFIG_DEFAULT_CONSOLE_LOGLEVEL=6
+# CONFIG_DEFAULT_POST_ON_LPC is not set
+# CONFIG_NO_EARLY_BOOTBLOCK_POSTCODES is not set
+# CONFIG_HWBASE_DEBUG_CB is not set
+CONFIG_HWBASE_DEBUG_NULL=y
+CONFIG_HAVE_ACPI_RESUME=y
+# CONFIG_DISABLE_ACPI_HIBERNATE is not set
+CONFIG_RESUME_PATH_SAME_AS_BOOT=y
+# CONFIG_NO_MONOTONIC_TIMER is not set
+CONFIG_HAVE_MONOTONIC_TIMER=y
+# CONFIG_TIMER_QUEUE is not set
+CONFIG_HAVE_OPTION_TABLE=y
+# CONFIG_PCI_IO_CFG_EXT is not set
+CONFIG_IOAPIC=y
+CONFIG_USE_WATCHDOG_ON_BOOT=y
+# CONFIG_GFXUMA is not set
+CONFIG_HAVE_MP_TABLE=y
+# CONFIG_COMMON_FADT is not set
+# CONFIG_ACPI_NHLT is not set
+
+#
+# System tables
+#
+CONFIG_GENERATE_MP_TABLE=y
+# CONFIG_GENERATE_PIRQ_TABLE is not set
+CONFIG_GENERATE_SMBIOS_TABLES=y
+CONFIG_SMBIOS_PROVIDED_BY_MOBO=y
+CONFIG_MAINBOARD_SERIAL_NUMBER="123456789"
+
+#
+# Payload
+#
+# CONFIG_PAYLOAD_NONE is not set
+# CONFIG_PAYLOAD_ELF is not set
+# CONFIG_PAYLOAD_FILO is not set
+# CONFIG_PAYLOAD_GRUB2 is not set
+# CONFIG_PAYLOAD_LINUXBOOT is not set
+CONFIG_PAYLOAD_SEABIOS=y
+# CONFIG_PAYLOAD_UBOOT is not set
+# CONFIG_PAYLOAD_YABITS is not set
+# CONFIG_PAYLOAD_LINUX is not set
+# CONFIG_PAYLOAD_TIANOCORE is not set
+CONFIG_PAYLOAD_FILE="payloads/external/SeaBIOS/seabios/out/bios.bin.elf"
+CONFIG_SEABIOS_STABLE=y
+# CONFIG_SEABIOS_MASTER is not set
+# CONFIG_SEABIOS_REVISION is not set
+# CONFIG_SEABIOS_THREAD_OPTIONROMS is not set
+CONFIG_SEABIOS_VGA_COREBOOT=y
+CONFIG_SEABIOS_BOOTORDER_FILE=""
+# CONFIG_SEABIOS_ADD_SERCON_PORT_FILE is not set
+CONFIG_PAYLOAD_VGABIOS_FILE="payloads/external/SeaBIOS/seabios/out/vgabios.bin"
+CONFIG_SEABIOS_DEBUG_LEVEL=-1
+
+#
+# Using default SeaBIOS log level
+#
+CONFIG_PAYLOAD_OPTIONS=""
+# CONFIG_PXE is not set
+# CONFIG_COMPRESSED_PAYLOAD_NONE is not set
+CONFIG_COMPRESSED_PAYLOAD_LZMA=y
+# CONFIG_COMPRESSED_PAYLOAD_LZ4 is not set
+# CONFIG_PAYLOAD_IS_FLAT_BINARY is not set
+CONFIG_COMPRESS_SECONDARY_PAYLOAD=y
+
+#
+# Secondary Payloads
+#
+# CONFIG_COREINFO_SECONDARY_PAYLOAD is not set
+# CONFIG_MEMTEST_SECONDARY_PAYLOAD is not set
+# CONFIG_NVRAMCUI_SECONDARY_PAYLOAD is not set
+# CONFIG_TINT_SECONDARY_PAYLOAD is not set
+
+#
+# Debugging
+#
+
+#
+# CPU Debug Settings
+#
+
+#
+# BLOB Debug Settings
+#
+
+#
+# General Debug Settings
+#
+# CONFIG_FATAL_ASSERTS is not set
+# CONFIG_DEBUG_CBFS is not set
+CONFIG_HAVE_DEBUG_RAM_SETUP=y
+# CONFIG_DEBUG_RAM_SETUP is not set
+CONFIG_HAVE_DEBUG_SMBUS=y
+# CONFIG_DEBUG_SMBUS is not set
+# CONFIG_DEBUG_SMI is not set
+# CONFIG_DEBUG_MALLOC is not set
+# CONFIG_DEBUG_CONSOLE_INIT is not set
+# CONFIG_DEBUG_SPI_FLASH is not set
+# CONFIG_TRACE is not set
+# CONFIG_DEBUG_BOOT_STATE is not set
+# CONFIG_DEBUG_ADA_CODE is not set
+CONFIG_HAVE_EM100_SUPPORT=y
+# CONFIG_EM100 is not set
+CONFIG_NO_EDID_FILL_FB=y
+CONFIG_RAMSTAGE_ADA=y
+CONFIG_RAMSTAGE_LIBHWBASE=y
+CONFIG_HWBASE_DYNAMIC_MMIO=y
+CONFIG_HWBASE_DEFAULT_MMCONF=0xf0000000
+CONFIG_HWBASE_DIRECT_PCIDEV=y
+CONFIG_WARNINGS_ARE_ERRORS=y
+# CONFIG_POWER_BUTTON_DEFAULT_ENABLE is not set
+# CONFIG_POWER_BUTTON_DEFAULT_DISABLE is not set
+# CONFIG_POWER_BUTTON_FORCE_ENABLE is not set
+# CONFIG_POWER_BUTTON_FORCE_DISABLE is not set
+# CONFIG_POWER_BUTTON_IS_OPTIONAL is not set
+# CONFIG_REG_SCRIPT is not set
+CONFIG_MAX_REBOOT_CNT=3
+# CONFIG_NO_XIP_EARLY_STAGES is not set
+# CONFIG_EARLY_CBMEM_LIST is not set
+CONFIG_RELOCATABLE_MODULES=y
+CONFIG_HAVE_BOOTBLOCK=y
+CONFIG_HAVE_ROMSTAGE=y
+CONFIG_HAVE_RAMSTAGE=y
diff --git a/lenovo/x200/4.12/2020-05-12T10_30_22Z/coreboot_console.txt b/lenovo/x200/4.12/2020-05-12T10_30_22Z/coreboot_console.txt
new file mode 100644
index 0000000..ded1035
--- /dev/null
+++ b/lenovo/x200/4.12/2020-05-12T10_30_22Z/coreboot_console.txt
@@ -0,0 +1,480 @@
+
+coreboot-4.12-284-g165efa1b86 Tue May 26 15:09:50 UTC 2020 bootblock starting (log level: 6)...
+FMAP: Found "FLASH" version 1.1 at 0x710000.
+FMAP: base = 0xff800000 size = 0x800000 #areas = 4
+FMAP: area COREBOOT found @ 710200 (982528 bytes)
+CBFS: Locating 'fallback/romstage'
+CBFS: Found @ offset 80 size 1067c
+BS: bootblock times (exec / console): total (unknown) / 1 ms
+
+
+coreboot-4.12-284-g165efa1b86 Tue May 26 15:09:50 UTC 2020 romstage starting (log level: 6)...
+Setting up static southbridge registers... done.
+Disabling Watchdog reboot... done.
+Setting up static northbridge registers... done.
+SMBus controller enabled
+Setting up Chipset Initialization Registers (CIR)
+SB: Resume from S3 detected.
+Intel ME early init
+Intel ME firmware is ready
+ME: Requested 32MB UMA
+FMAP: area RW_MRC_CACHE found @ 700000 (65536 bytes)
+SMM Memory Map
+SMRAM       : 0xbf800000 0x800000
+ Subregion 0: 0xbf800000 0x700000
+ Subregion 1: 0xbff00000 0x100000
+ Subregion 2: 0xc0000000 0x0
+MTRR Range: Start=bf000000 End=bf800000 (Size 800000)
+MTRR Range: Start=bf800000 End=c0000000 (Size 800000)
+MTRR Range: Start=ff800000 End=0 (Size 800000)
+BS: romstage times (exec / console): total (unknown) / 1 ms
+
+
+coreboot-4.12-284-g165efa1b86 Tue May 26 15:09:50 UTC 2020 postcar starting (log level: 6)...
+Jumping to image.
+
+
+coreboot-4.12-284-g165efa1b86 Tue May 26 15:09:50 UTC 2020 ramstage starting (log level: 6)...
+S3 Resume
+Disabling PEG10.
+Enumerating buses...
+Root Device scanning...
+CPU_CLUSTER: 0 enabled
+DOMAIN: 0000 enabled
+DOMAIN: 0000 scanning...
+PCI: pci_scan_bus for bus 00
+PCI: 00:00.0 [8086/0044] enabled
+PCI: 00:02.0 [8086/0046] enabled
+PCI: 00:16.0 [8086/3b64] enabled
+PCI: 00:16.1: Disabling device
+PCI: 00:16.2: Disabling device
+PCI: 00:16.3: Disabling device
+PCI: 00:19.0 [8086/10ea] enabled
+PCI: 00:1a.0 [8086/3b3c] enabled
+PCI: 00:1b.0 [8086/3b56] enabled
+PCI: 00:1c.0 subordinate bus PCI Express
+PCI: 00:1c.0 [8086/3b42] enabled
+PCI: 00:1c.1 subordinate bus PCI Express
+PCI: 00:1c.1 [8086/3b44] enabled
+PCI: 00:1c.2: Disabling device
+PCI: 00:1c.2 [8086/3b46] disabled No operations
+PCI: 00:1c.3 subordinate bus PCI Express
+PCI: 00:1c.3 [8086/3b48] enabled
+PCI: 00:1c.4 subordinate bus PCI Express
+PCI: 00:1c.4 [8086/3b4a] enabled
+PCI: 00:1c.5: Disabling device
+PCI: 00:1c.5 [8086/3b4c] disabled No operations
+PCI: 00:1c.6: Disabling device
+PCI: 00:1c.6 [8086/3b4e] disabled No operations
+PCI: 00:1c.7: Disabling device
+PCI: 00:1c.7 [8086/3b50] disabled No operations
+PCI: 00:1d.0 [8086/3b34] enabled
+PCI: 00:1e.0 [8086/2448] enabled
+PCI: 00:1f.0 [8086/3b07] enabled
+PCI: 00:1f.2 [8086/3b2e] enabled
+PCI: 00:1f.3 [8086/3b30] enabled
+PCI: 00:1f.4: Disabling device
+PCI: 00:1f.5: Disabling device
+PCI: 00:1f.5 [8086/3b2d] disabled No operations
+PCI: 00:1f.6 [8086/3b32] enabled
+PCI: Leftover static devices:
+PCI: 00:01.0
+PCI: 00:16.1
+PCI: 00:16.2
+PCI: 00:16.3
+PCI: 00:1f.4
+PCI: Check your devicetree.cb.
+PCI: 00:1c.0 scanning...
+PCI: pci_scan_bus for bus 01
+scan_bus: bus PCI: 00:1c.0 finished in 0 msecs
+PCI: 00:1c.1 scanning...
+PCI: pci_scan_bus for bus 02
+scan_bus: bus PCI: 00:1c.1 finished in 0 msecs
+PCI: 00:1c.3 scanning...
+PCI: pci_scan_bus for bus 03
+scan_bus: bus PCI: 00:1c.3 finished in 0 msecs
+PCI: 00:1c.4 scanning...
+PCI: pci_scan_bus for bus 04
+PCI: 04:00.0 [168c/002a] enabled
+Enabling Common Clock Configuration
+ASPM: Enabled L1
+PCIe: Max_Payload_Size adjusted to 128
+Failed to enable LTR for dev = PCI: 04:00.0
+scan_bus: bus PCI: 00:1c.4 finished in 0 msecs
+PCI: 00:1e.0 scanning...
+PCI: pci_scan_bus for bus 05
+scan_bus: bus PCI: 00:1e.0 finished in 0 msecs
+PCI: 00:1f.0 scanning...
+PNP: 164e.3 enabled
+PNP: 164e.2 disabled
+PNP: 164e.7 disabled
+PNP: 164e.19 disabled
+PNP: 0c31.0 enabled
+PMH7: ID 04 Revision 01
+PNP: 00ff.1 enabled
+H8: EC Firmware ID 6QHT34WW-3.18, Version 5.01B
+H8: BDC not installed
+H8: WWAN detection not implemented. Assuming WWAN installed
+dock is connected
+PNP: 00ff.2 enabled
+scan_bus: bus PCI: 00:1f.0 finished in 7 msecs
+PCI: 00:1f.3 scanning...
+bus: PCI: 00:1f.3[0]->I2C: 01:54 enabled
+bus: PCI: 00:1f.3[0]->I2C: 01:55 enabled
+bus: PCI: 00:1f.3[0]->I2C: 01:56 enabled
+bus: PCI: 00:1f.3[0]->I2C: 01:57 enabled
+bus: PCI: 00:1f.3[0]->I2C: 01:5c enabled
+bus: PCI: 00:1f.3[0]->I2C: 01:5d enabled
+bus: PCI: 00:1f.3[0]->I2C: 01:5e enabled
+bus: PCI: 00:1f.3[0]->I2C: 01:5f enabled
+scan_bus: bus PCI: 00:1f.3 finished in 0 msecs
+scan_bus: bus DOMAIN: 0000 finished in 7 msecs
+scan_bus: bus Root Device finished in 7 msecs
+done
+BS: BS_DEV_ENUMERATE run times (exec / console): 8 / 0 ms
+FMAP: area RW_MRC_CACHE found @ 700000 (65536 bytes)
+MRC: Checking cached data update for 'RW_MRC_CACHE'.
+Manufacturer: c2
+SF: Detected c2 2017 with sector size 0x1000, total 0x800000
+found VGA at PCI: 00:02.0
+Setting up VGA for PCI: 00:02.0
+Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000
+Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
+Allocating resources...
+Reading resources...
+Adding PCIe enhanced config space BAR 0xe0000000-0xf0000000.
+ram_before_4g_top: 0xbf800000
+TOUUD: 0x2380
+PNP: 00ff.1 missing read_resources
+PNP: 00ff.2 missing read_resources
+Done reading resources.
+skipping PNP: 164e.3@29 fixed resource, size=0!
+skipping PNP: 164e.3@f0 fixed resource, size=0!
+skipping PNP: 00ff.2@60 fixed resource, size=0!
+skipping PNP: 00ff.2@62 fixed resource, size=0!
+skipping PNP: 00ff.2@64 fixed resource, size=0!
+skipping PNP: 00ff.2@66 fixed resource, size=0!
+Setting resources...
+PCI: 00:02.0 10 <- [0x00cf800000 - 0x00cfbfffff] size 0x00400000 gran 0x16 mem64
+PCI: 00:02.0 20 <- [0x0000001840 - 0x0000001847] size 0x00000008 gran 0x03 io
+PCI: 00:16.0 10 <- [0x00cfd2a000 - 0x00cfd2a00f] size 0x00000010 gran 0x04 mem64
+PCI: 00:19.0 10 <- [0x00cfd00000 - 0x00cfd1ffff] size 0x00020000 gran 0x11 mem
+PCI: 00:19.0 14 <- [0x00cfd24000 - 0x00cfd24fff] size 0x00001000 gran 0x0c mem
+PCI: 00:19.0 18 <- [0x0000001800 - 0x000000181f] size 0x00000020 gran 0x05 io
+PCI: 00:1a.0 10 <- [0x00cfd27000 - 0x00cfd273ff] size 0x00000400 gran 0x0a mem
+PCI: 00:1b.0 10 <- [0x00cfd20000 - 0x00cfd23fff] size 0x00004000 gran 0x0e mem64
+PCI: 00:1c.0 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 01 io
+PCI: 00:1c.0 24 <- [0x00cfffffff - 0x00cffffffe] size 0x00000000 gran 0x14 bus 01 prefmem
+PCI: 00:1c.0 20 <- [0x00cfffffff - 0x00cffffffe] size 0x00000000 gran 0x14 bus 01 mem
+PCI: 00:1c.1 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 02 io
+PCI: 00:1c.1 24 <- [0x00cfffffff - 0x00cffffffe] size 0x00000000 gran 0x14 bus 02 prefmem
+PCI: 00:1c.1 20 <- [0x00cfffffff - 0x00cffffffe] size 0x00000000 gran 0x14 bus 02 mem
+PCI: 00:1c.3 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 03 io
+PCI: 00:1c.3 24 <- [0x00cfffffff - 0x00cffffffe] size 0x00000000 gran 0x14 bus 03 prefmem
+PCI: 00:1c.3 20 <- [0x00cfffffff - 0x00cffffffe] size 0x00000000 gran 0x14 bus 03 mem
+PCI: 00:1c.4 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 04 io
+PCI: 00:1c.4 24 <- [0x00cfffffff - 0x00cffffffe] size 0x00000000 gran 0x14 bus 04 prefmem
+PCI: 00:1c.4 20 <- [0x00cfc00000 - 0x00cfcfffff] size 0x00100000 gran 0x14 bus 04 mem
+PCI: 04:00.0 10 <- [0x00cfc00000 - 0x00cfc0ffff] size 0x00010000 gran 0x10 mem64
+PCI: 00:1d.0 10 <- [0x00cfd28000 - 0x00cfd283ff] size 0x00000400 gran 0x0a mem
+PCI: 00:1e.0 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 05 io
+PCI: 00:1e.0 24 <- [0x00cfffffff - 0x00cffffffe] size 0x00000000 gran 0x14 bus 05 prefmem
+PCI: 00:1e.0 20 <- [0x00cfffffff - 0x00cffffffe] size 0x00000000 gran 0x14 bus 05 mem
+PNP: 164e.3 60 <- [0x0000000200 - 0x0000000207] size 0x00000008 gran 0x03 io
+PNP: 164e.3 29 <- [0x00000000b0 - 0x00000000af] size 0x00000000 gran 0x00 irq
+PNP: 164e.3 70 <- [0x0000000005 - 0x0000000005] size 0x00000001 gran 0x00 irq
+PNP: 164e.3 f0 <- [0x0000000082 - 0x0000000081] size 0x00000000 gran 0x00 irq
+PNP: 00ff.1 missing set_resources
+PNP: 00ff.2 missing set_resources
+PCI: 00:1f.2 10 <- [0x0000001848 - 0x000000184f] size 0x00000008 gran 0x03 io
+PCI: 00:1f.2 14 <- [0x0000001858 - 0x000000185b] size 0x00000004 gran 0x02 io
+PCI: 00:1f.2 18 <- [0x0000001850 - 0x0000001857] size 0x00000008 gran 0x03 io
+PCI: 00:1f.2 1c <- [0x000000185c - 0x000000185f] size 0x00000004 gran 0x02 io
+PCI: 00:1f.2 20 <- [0x0000001820 - 0x000000183f] size 0x00000020 gran 0x05 io
+PCI: 00:1f.2 24 <- [0x00cfd26000 - 0x00cfd267ff] size 0x00000800 gran 0x0b mem
+PCI: 00:1f.3 10 <- [0x00cfd29000 - 0x00cfd290ff] size 0x00000100 gran 0x08 mem64
+PCI: 00:1f.6 10 <- [0x00cfd25000 - 0x00cfd25fff] size 0x00001000 gran 0x0c mem64
+Done setting resources.
+Done allocating resources.
+BS: BS_DEV_RESOURCES run times (exec / console): 1 / 0 ms
+Enabling resources...
+PCI: 00:00.0 subsystem <- 17aa/2193
+PCI: 00:00.0 cmd <- 06
+PCI: 00:02.0 subsystem <- 17aa/215a
+PCI: 00:02.0 cmd <- 03
+PCI: 00:16.0 subsystem <- 8086/3b64
+PCI: 00:16.0 cmd <- 02
+PCI: 00:19.0 subsystem <- 17aa/2153
+PCI: 00:19.0 cmd <- 103
+PCI: 00:1a.0 subsystem <- 17aa/2163
+PCI: 00:1a.0 cmd <- 102
+PCI: 00:1b.0 subsystem <- 17aa/215e
+PCI: 00:1b.0 cmd <- 102
+PCI: 00:1c.0 bridge ctrl <- 0013
+PCI: 00:1c.0 cmd <- 100
+PCI: 00:1c.1 bridge ctrl <- 0013
+PCI: 00:1c.1 cmd <- 100
+PCI: 00:1c.3 bridge ctrl <- 0013
+PCI: 00:1c.3 cmd <- 100
+PCI: 00:1c.4 bridge ctrl <- 0013
+PCI: 00:1c.4 cmd <- 106
+PCI: 00:1d.0 subsystem <- 17aa/2163
+PCI: 00:1d.0 cmd <- 102
+PCI: 00:1e.0 bridge ctrl <- 0013
+PCI: 00:1e.0 subsystem <- 8086/2448
+PCI: 00:1e.0 cmd <- 100
+PCI: 00:1f.0 subsystem <- 17aa/2166
+PCI: 00:1f.0 cmd <- 107
+PCI: 00:1f.2 subsystem <- 17aa/2168
+PCI: 00:1f.2 cmd <- 03
+PCI: 00:1f.3 subsystem <- 17aa/2167
+PCI: 00:1f.3 cmd <- 103
+PCI: 00:1f.6 subsystem <- 8086/3b32
+PCI: 00:1f.6 cmd <- 02
+PCI: 04:00.0 cmd <- 02
+done.
+Found TPM ST33ZP24 by ST Microelectronics
+TPM: Handle S3 resume.
+TPM: Resume
+TPM: command 0x99 returned 0x9
+TPM: Resume failed (0x9).
+BS: BS_DEV_INIT entry times (exec / console): 4 / 0 ms
+Initializing devices...
+CPU_CLUSTER: 0 init
+MTRR: Physical address space:
+0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6
+0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0
+0x00000000000c0000 - 0x00000000bf800000 size 0xbf740000 type 6
+0x00000000bf800000 - 0x00000000d0000000 size 0x10800000 type 0
+0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1
+0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0
+0x0000000100000000 - 0x0000000238000000 size 0x138000000 type 6
+MTRR: Fixed MSR 0x250 0x0606060606060606
+MTRR: Fixed MSR 0x258 0x0606060606060606
+MTRR: Fixed MSR 0x259 0x0000000000000000
+MTRR: Fixed MSR 0x268 0x0606060606060606
+MTRR: Fixed MSR 0x269 0x0606060606060606
+MTRR: Fixed MSR 0x26a 0x0606060606060606
+MTRR: Fixed MSR 0x26b 0x0606060606060606
+MTRR: Fixed MSR 0x26c 0x0606060606060606
+MTRR: Fixed MSR 0x26d 0x0606060606060606
+MTRR: Fixed MSR 0x26e 0x0606060606060606
+MTRR: Fixed MSR 0x26f 0x0606060606060606
+CPU physical address size: 36 bits
+MTRR: default type WB/UC MTRR counts: 4/6.
+MTRR: WB selected as default type.
+MTRR: 0 base 0x00000000bf800000 mask 0x0000000fff800000 type 0
+MTRR: 1 base 0x00000000c0000000 mask 0x0000000ff0000000 type 0
+MTRR: 2 base 0x00000000d0000000 mask 0x0000000ff0000000 type 1
+MTRR: 3 base 0x00000000e0000000 mask 0x0000000fe0000000 type 0
+
+MTRR check
+Fixed MTRRs   : Enabled
+Variable MTRRs: Enabled
+
+CPU has 2 cores, 4 threads enabled.
+Setting up SMI for CPU
+Will perform SMM setup.
+FMAP: area COREBOOT found @ 710200 (982528 bytes)
+CBFS: Locating 'cpu_microcode_blob.bin'
+CBFS: Found @ offset 10780 size 3400
+microcode: sig=0x20652 pf=0x10 revision=0x11
+CPU: Intel(R) Core(TM) i5 CPU       M 540  @ 2.53GHz.
+Loading module at 0x00030000 with entry 0x00030000. filesize: 0x170 memsize: 0x170
+Processing 16 relocs. Offset value of 0x00030000
+Attempting to start 3 APs
+Waiting for 10ms after sending INIT.
+Waiting for 1st SIPI to complete...done.
+Waiting for 2nd SIPI to complete...AP: slot 1 apic_id 1.
+done.
+AP: slot 2 apic_id 5.
+AP: slot 3 apic_id 4.
+Loading module at 0x00038000 with entry 0x00038000. filesize: 0x1b0 memsize: 0x1b0
+Processing 13 relocs. Offset value of 0x00038000
+SMM Module: stub loaded at 0x00038000. Will call 0xbf7a8c97(0x00000000)
+Installing SMM handler to 0xbf800000
+Loading module at 0xbf810000 with entry 0xbf81029a. filesize: 0x1590 memsize: 0x55b8
+Processing 66 relocs. Offset value of 0xbf810000
+Loading module at 0xbf808000 with entry 0xbf808000. filesize: 0x1b0 memsize: 0x1b0
+Processing 13 relocs. Offset value of 0xbf808000
+SMM Module: placing jmp sequence at 0xbf807c00 rel16 0x03fd
+SMM Module: placing jmp sequence at 0xbf807800 rel16 0x07fd
+SMM Module: placing jmp sequence at 0xbf807400 rel16 0x0bfd
+SMM Module: stub loaded at 0xbf808000. Will call 0xbf81029a(0x00000000)
+Initializing Southbridge SMI...
+
+New SMBASE 0xbf800000
+In relocation handler: cpu 0
+New SMBASE=0xbf800000
+Writing SMRR. base = 0xbf800006, mask=0xff800800
+Relocation complete.
+New SMBASE 0xbf7ffc00
+microcode: Update skipped, already up-to-date
+In relocation handler: cpu 1
+New SMBASE=0xbf7ffc00
+Writing SMRR. base = 0xbf800006, mask=0xff800800
+Relocation complete.
+New SMBASE 0xbf7ff400
+In relocation handler: cpu 3
+New SMBASE=0xbf7ff400
+Writing SMRR. base = 0xbf800006, mask=0xff800800
+microcode: Update skipped, already up-to-date
+Relocation complete.
+microcode: Update skipped, already up-to-date
+New SMBASE 0xbf7ff800
+In relocation handler: cpu 2
+New SMBASE=0xbf7ff800
+Writing SMRR. base = 0xbf800006, mask=0xff800800
+Relocation complete.
+microcode: Update skipped, already up-to-date
+Initializing CPU #0
+CPU: vendor Intel device 20652
+CPU: family 06, model 25, stepping 02
+Enabling cache
+CPU: Intel(R) Core(TM) i5 CPU       M 540  @ 2.53GHz.
+CPU:lapic=0, boot_cpu=1
+Setting up local APIC...
+ apic_id: 0x00 done.
+VMX status: enabled
+IA32_FEATURE_CONTROL status: locked
+model_x06ax: frequency set to 2527
+Turbo is available and visible
+CPU #0 initialized
+Initializing CPU #1
+Initializing CPU #3
+CPU: vendor Intel device 20652
+CPU: family 06, model 25, stepping 02
+Initializing CPU #2
+Enabling cache
+CPU: vendor Intel device 20652
+CPU: vendor Intel device 20652
+CPU: family 06, model 25, stepping 02
+CPU: Intel(R) Core(TM) i5 CPU       M 540  @ 2.53GHz.
+CPU: family 06, model 25, stepping 02
+CPU:lapic=1, boot_cpu=0
+Enabling cache
+Setting up local APIC...
+Enabling cache
+ apic_id: 0x01 done.
+VMX status: enabled
+CPU: Intel(R) Core(TM) i5 CPU       M 540  @ 2.53GHz.
+IA32_FEATURE_CONTROL status: locked
+CPU:lapic=4, boot_cpu=0
+CPU: Intel(R) Core(TM) i5 CPU       M 540  @ 2.53GHz.
+Setting up local APIC...
+model_x06ax: frequency set to 2527
+ apic_id: 0x04 done.
+CPU #1 initialized
+VMX status: enabled
+CPU:lapic=5, boot_cpu=0
+IA32_FEATURE_CONTROL status: locked
+Setting up local APIC...
+ apic_id: 0x05 done.
+model_x06ax: frequency set to 2527
+VMX status: enabled
+CPU #3 initialized
+IA32_FEATURE_CONTROL status: locked
+model_x06ax: frequency set to 2527
+CPU #2 initialized
+bsp_do_flight_plan done after 6 msecs.
+Initializing southbridge SMI...
+SMI_STS: 
+GPE0_STS: GPIO14 GPIO11 GPIO9 GPIO2 GPIO0 
+ALT_GP_SMI_STS: GPI14 GPI13 GPI11 GPI9 GPI7 GPI6 GPI5 GPI4 GPI3 GPI2 GPI1 GPI0 
+TCO_STS: 
+Locking SMM.
+CPU_CLUSTER: 0 init finished in 16 msecs
+PCI: 00:00.0 init
+PCI: 00:00.0 init finished in 0 msecs
+PCI: 00:02.0 init
+GT Power Management Init (post VBIOS)
+PCI: 00:02.0 init finished in 0 msecs
+PCI: 00:16.0 init
+ME: BIOS path: S3 Wake
+PCI: 00:16.0: Disabling device
+PCI: 00:16.0 init finished in 0 msecs
+PCI: 00:19.0 init
+PCI: 00:19.0 init finished in 0 msecs
+PCI: 00:1a.0 init
+EHCI: Setting up controller.. done.
+PCI: 00:1a.0 init finished in 0 msecs
+PCI: 00:1b.0 init
+Azalia: base = cfd20000
+Azalia: V1CTL disabled.
+Azalia: codec_mask = 09
+Azalia: Initializing codec #3
+Azalia: codec viddid: 80862804
+Azalia: verb_size: 16
+Azalia: verb loaded.
+Azalia: Initializing codec #0
+Azalia: codec viddid: 14f15069
+Azalia: verb_size: 44
+Azalia: verb loaded.
+PCI: 00:1b.0 init finished in 4 msecs
+PCI: 00:1d.0 init
+EHCI: Setting up controller.. done.
+PCI: 00:1d.0 init finished in 0 msecs
+PCI: 00:1e.0 init
+PCI init.
+PCI: 00:1e.0 init finished in 0 msecs
+PCI: 00:1f.0 init
+pch: lpc_init
+IOAPIC: Initializing IOAPIC at 0xfec00000
+IOAPIC: Bootstrap Processor Local APIC = 0x00
+IOAPIC: ID = 0x01
+Set power off after power failure.
+NMI sources disabled.
+Mobile 5 PM init
+rtc_failed = 0x0
+PCI: 00:1f.0 init finished in 0 msecs
+PCI: 00:1f.2 init
+SATA: Initializing...
+SATA: Controller in AHCI mode.
+ABAR: 0xcfd26000
+PCI: 00:1f.2 init finished in 0 msecs
+PCI: 00:1f.3 init
+PCI: 00:1f.3 init finished in 0 msecs
+PCI: 00:1f.6 init
+Thermal init start.
+Thermal init done.
+PCI: 00:1f.6 init finished in 0 msecs
+PCI: 04:00.0 init
+PCI: 04:00.0 init finished in 0 msecs
+PNP: 164e.3 init
+PNP: 164e.3 init finished in 0 msecs
+PNP: 00ff.2 init
+PNP: 00ff.2 init finished in 0 msecs
+smbus: PCI: 00:1f.3[0]->I2C: 01:54 init
+I2C: 01:54 init finished in 0 msecs
+smbus: PCI: 00:1f.3[0]->I2C: 01:55 init
+I2C: 01:55 init finished in 0 msecs
+smbus: PCI: 00:1f.3[0]->I2C: 01:56 init
+I2C: 01:56 init finished in 0 msecs
+smbus: PCI: 00:1f.3[0]->I2C: 01:57 init
+I2C: 01:57 init finished in 0 msecs
+smbus: PCI: 00:1f.3[0]->I2C: 01:5c init
+Locking EEPROM RFID
+init EEPROM done
+I2C: 01:5c init finished in 26 msecs
+smbus: PCI: 00:1f.3[0]->I2C: 01:5d init
+I2C: 01:5d init finished in 0 msecs
+smbus: PCI: 00:1f.3[0]->I2C: 01:5e init
+I2C: 01:5e init finished in 0 msecs
+smbus: PCI: 00:1f.3[0]->I2C: 01:5f init
+I2C: 01:5f init finished in 0 msecs
+Devices initialized
+BS: BS_DEV_INIT run times (exec / console): 49 / 0 ms
+Finalize devices...
+PCI: 00:1f.0 final
+Devices finalized
+Trying to find the wakeup vector...
+Looking on 0x000f6750 for valid checksum
+Checksum 1 passed
+Checksum 2 passed all OK
+RSDP found at 0x000f6750
+RSDT found at 0xbf74f030 ends at 0xbf74f06c
+FADT found at 0xbf752d80
+FACS found at 0xbf74f240
+OS waking vector is 0x0009a1d0
+Restore GNVS pointer to 0xbf74e000
+
diff --git a/lenovo/x200/4.12/2020-05-12T10_30_22Z/coreboot_timestamps.txt b/lenovo/x200/4.12/2020-05-12T10_30_22Z/coreboot_timestamps.txt
new file mode 100644
index 0000000..5acef36
--- /dev/null
+++ b/lenovo/x200/4.12/2020-05-12T10_30_22Z/coreboot_timestamps.txt
@@ -0,0 +1 @@
+No timestamps found in coreboot table.
diff --git a/lenovo/x200/4.12/2020-05-12T10_30_22Z/kernel_log.txt b/lenovo/x200/4.12/2020-05-12T10_30_22Z/kernel_log.txt
new file mode 100644
index 0000000..b9bf75a
--- /dev/null
+++ b/lenovo/x200/4.12/2020-05-12T10_30_22Z/kernel_log.txt
@@ -0,0 +1,1227 @@
+[    0.000000] Linux version 5.4.44-rt26 (stefan@nobby) (gcc version 9.3.0 (Gentoo Hardened 9.3.0 p2)) #1 SMP PREEMPT Sat Jun 6 01:17:38 CEST 2020
+[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.4.44-rt26 root=/dev/mapper/vg_main-gentoo ro quiet dolvm crypt_root=/dev/sda2 root_trim=yes acpi_backlight=video thinkpad-acpi.fan_control=1 ath9k.blink=1 ath9k.nohwcrypt=1 panic=5 dock.immediate_undock=0
+[    0.000000] x86/fpu: x87 FPU will use FXSAVE
+[    0.000000] BIOS-provided physical RAM map:
+[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
+[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
+[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
+[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf73afff] usable
+[    0.000000] BIOS-e820: [mem 0x00000000bf73b000-0x00000000bfffffff] reserved
+[    0.000000] BIOS-e820: [mem 0x00000000c1c00000-0x00000000c3ffffff] reserved
+[    0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000efffffff] reserved
+[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fedfffff] reserved
+[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
+[    0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
+[    0.000000] BIOS-e820: [mem 0x0000000200000000-0x0000000237ffffff] usable
+[    0.000000] NX (Execute Disable) protection: active
+[    0.000000] SMBIOS 2.8 present.
+[    0.000000] DMI: LENOVO 3626F7U/3626F7U, BIOS CBET4000 4.12-284-g165efa1b86 05/26/2020
+[    0.000000] tsc: Fast TSC calibration using PIT
+[    0.000000] tsc: Detected 2527.088 MHz processor
+[    0.001171] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
+[    0.001172] e820: remove [mem 0x000a0000-0x000fffff] usable
+[    0.001176] last_pfn = 0x238000 max_arch_pfn = 0x400000000
+[    0.001178] MTRR default type: write-back
+[    0.001179] MTRR fixed ranges enabled:
+[    0.001179]   00000-9FFFF write-back
+[    0.001180]   A0000-BFFFF uncachable
+[    0.001181]   C0000-FFFFF write-back
+[    0.001181] MTRR variable ranges enabled:
+[    0.001182]   0 base 0BF800000 mask FFF800000 uncachable
+[    0.001183]   1 base 0C0000000 mask FF0000000 uncachable
+[    0.001184]   2 base 0D0000000 mask FF0000000 write-combining
+[    0.001185]   3 base 0E0000000 mask FE0000000 uncachable
+[    0.001185]   4 disabled
+[    0.001186]   5 disabled
+[    0.001186]   6 disabled
+[    0.001186]   7 disabled
+[    0.001666] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
+[    0.002017] last_pfn = 0xbf73b max_arch_pfn = 0x400000000
+[    0.002036] BRK [0x02801000, 0x02801fff] PGTABLE
+[    0.002039] BRK [0x02802000, 0x02802fff] PGTABLE
+[    0.002041] BRK [0x02803000, 0x02803fff] PGTABLE
+[    0.002083] BRK [0x02804000, 0x02804fff] PGTABLE
+[    0.002301] BRK [0x02805000, 0x02805fff] PGTABLE
+[    0.002310] BRK [0x02806000, 0x02806fff] PGTABLE
+[    0.002364] RAMDISK: [mem 0x37944000-0x37c99fff]
+[    0.002371] ACPI: Early table checksum verification disabled
+[    0.002377] ACPI: RSDP 0x00000000000F6750 000024 (v02 COREv4)
+[    0.002381] ACPI: XSDT 0x00000000BF74F0E0 000054 (v01 COREv4 COREBOOT 00000000 CORE 20200110)
+[    0.002387] ACPI: FACP 0x00000000BF752D80 000114 (v06 COREv4 COREBOOT 00000000 CORE 20200110)
+[    0.002393] ACPI: DSDT 0x00000000BF74F280 003AF9 (v02 COREv4 COREBOOT 20130325 INTL 20200110)
+[    0.002396] ACPI: FACS 0x00000000BF74F240 000040
+[    0.002398] ACPI: FACS 0x00000000BF74F240 000040
+[    0.002401] ACPI: SSDT 0x00000000BF752EA0 00153D (v02 COREv4 COREBOOT 0000002A CORE 20200110)
+[    0.002404] ACPI: MCFG 0x00000000BF7543E0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20200110)
+[    0.002407] ACPI: TCPA 0x00000000BF754420 000032 (v02 COREv4 COREBOOT 00000000 CORE 20200110)
+[    0.002409] ACPI: APIC 0x00000000BF754460 000084 (v03 COREv4 COREBOOT 00000000 CORE 20200110)
+[    0.002412] ACPI: HPET 0x00000000BF7564F0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20200110)
+[    0.002420] ACPI: Local APIC address 0xfee00000
+[    0.002442] Zone ranges:
+[    0.002443]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
+[    0.002444]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
+[    0.002445]   Normal   [mem 0x0000000100000000-0x0000000237ffffff]
+[    0.002445] Movable zone start for each node
+[    0.002446] Early memory node ranges
+[    0.002446]   node   0: [mem 0x0000000000001000-0x000000000009efff]
+[    0.002447]   node   0: [mem 0x0000000000100000-0x00000000bf73afff]
+[    0.002448]   node   0: [mem 0x0000000100000000-0x00000001fbffffff]
+[    0.002449]   node   0: [mem 0x0000000200000000-0x0000000237ffffff]
+[    0.002663] Zeroed struct page in unavailable ranges: 18727 pages
+[    0.002663] Initmem setup node 0 [mem 0x0000000000001000-0x0000000237ffffff]
+[    0.002665] On node 0 totalpages: 2045657
+[    0.002666]   DMA zone: 64 pages used for memmap
+[    0.002667]   DMA zone: 21 pages reserved
+[    0.002667]   DMA zone: 3998 pages, LIFO batch:0
+[    0.002722]   DMA32 zone: 12189 pages used for memmap
+[    0.002723]   DMA32 zone: 780091 pages, LIFO batch:63
+[    0.015311]   Normal zone: 19968 pages used for memmap
+[    0.015316]   Normal zone: 1261568 pages, LIFO batch:63
+[    0.032463] Reserving Intel graphics memory at [mem 0xc2000000-0xc3ffffff]
+[    0.032607] ACPI: PM-Timer IO Port: 0x508
+[    0.032609] ACPI: Local APIC address 0xfee00000
+[    0.032615] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
+[    0.032617] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
+[    0.032617] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
+[    0.032618] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
+[    0.032629] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
+[    0.032632] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
+[    0.032633] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
+[    0.032635] ACPI: IRQ0 used by override.
+[    0.032636] ACPI: IRQ9 used by override.
+[    0.032638] Using ACPI (MADT) for SMP configuration information
+[    0.032639] ACPI: HPET id: 0x8086a701 base: 0xfed00000
+[    0.032645] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
+[    0.032659] [mem 0xf0000000-0xfecfffff] available for PCI devices
+[    0.032662] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
+[    0.181533] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
+[    0.181907] percpu: Embedded 38 pages/cpu s116824 r8192 d30632 u524288
+[    0.181916] pcpu-alloc: s116824 r8192 d30632 u524288 alloc=1*2097152
+[    0.181918] pcpu-alloc: [0] 0 1 2 3 
+[    0.181937] Built 1 zonelists, mobility grouping on.  Total pages: 2013415
+[    0.181939] Kernel command line: BOOT_IMAGE=/vmlinuz-5.4.44-rt26 root=/dev/mapper/vg_main-gentoo ro quiet dolvm crypt_root=/dev/sda2 root_trim=yes acpi_backlight=video thinkpad-acpi.fan_control=1 ath9k.blink=1 ath9k.nohwcrypt=1 panic=5 dock.immediate_undock=0
+[    0.183375] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
+[    0.185606] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
+[    0.185659] mem auto-init: stack:off, heap alloc:off, heap free:off
+[    0.227039] Memory: 7946612K/8182628K available (12291K kernel code, 541K rwdata, 2848K rodata, 904K init, 1136K bss, 236016K reserved, 0K cma-reserved)
+[    0.227104] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
+[    0.227114] Kernel/User page tables isolation: enabled
+[    0.227170] rcu: Preemptible hierarchical RCU implementation.
+[    0.227172] 	Tasks RCU enabled.
+[    0.227173] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
+[    0.227183] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
+[    0.227529] random: get_random_bytes called from start_kernel+0x2fc/0x49c with crng_init=0
+[    0.229867] Console: colour VGA+ 80x25
+[    0.229869] printk: console [tty0] enabled
+[    0.229874] ACPI: Core revision 20190816
+[    0.229949] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
+[    0.229967] APIC: Switch to symmetric I/O mode setup
+[    0.230480] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
+[    0.234966] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x246d2eef045, max_idle_ns: 440795298906 ns
+[    0.234973] Calibrating delay loop (skipped), value calculated using timer frequency.. 5054.17 BogoMIPS (lpj=2527088)
+[    0.234974] pid_max: default: 32768 minimum: 301
+[    0.235023] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
+[    0.235049] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
+[    0.235250] mce: CPU0: Thermal monitoring enabled (TM1)
+[    0.235260] process: using mwait in idle threads
+[    0.235264] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
+[    0.235265] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
+[    0.235268] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
+[    0.235270] Spectre V2 : Mitigation: Full generic retpoline
+[    0.235271] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
+[    0.235272] Spectre V2 : Enabling Restricted Speculation for firmware calls
+[    0.235273] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
+[    0.235274] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
+[    0.235276] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
+[    0.235278] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
+[    0.235434] Freeing SMP alternatives memory: 32K
+[    0.337633] smpboot: CPU0: Intel(R) Core(TM) i5 CPU       M 540  @ 2.53GHz (family: 0x6, model: 0x25, stepping: 0x2)
+[    0.342975] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
+[    0.342982] core: CPUID marked event: 'bus cycles' unavailable
+[    0.342983] ... version:                3
+[    0.342984] ... bit width:              48
+[    0.342984] ... generic registers:      4
+[    0.342985] ... value mask:             0000ffffffffffff
+[    0.342986] ... max period:             000000007fffffff
+[    0.342986] ... fixed-purpose events:   3
+[    0.342987] ... event mask:             000000070000000f
+[    0.344970] rcu: Hierarchical SRCU implementation.
+[    0.348970] smp: Bringing up secondary CPUs ...
+[    0.356977] x86: Booting SMP configuration:
+[    0.356979] .... node  #0, CPUs:      #1
+[    0.358034] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
+[    0.365984]  #2 #3
+[    0.375995] smp: Brought up 1 node, 4 CPUs
+[    0.375996] smpboot: Max logical packages: 1
+[    0.375997] smpboot: Total of 4 processors activated (20216.70 BogoMIPS)
+[    0.378235] devtmpfs: initialized
+[    0.378235] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
+[    0.378235] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
+[    0.378235] NET: Registered protocol family 16
+[    0.379214] cpuidle: using governor menu
+[    0.379214] ACPI: bus type PCI registered
+[    0.379214] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
+[    0.379214] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
+[    0.379214] PCI: Using configuration type 1 for base access
+[    0.383029] cryptd: max_cpu_qlen set to 1000
+[    0.384042] ACPI: Added _OSI(Module Device)
+[    0.384044] ACPI: Added _OSI(Processor Device)
+[    0.384045] ACPI: Added _OSI(3.0 _SCP Extensions)
+[    0.384046] ACPI: Added _OSI(Processor Aggregator Device)
+[    0.384048] ACPI: Added _OSI(Linux-Dell-Video)
+[    0.384049] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
+[    0.384050] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
+[    0.386789] ACPI: 2 ACPI AML tables successfully acquired and loaded
+[    0.387988] ACPI: EC: EC started
+[    0.387990] ACPI: EC: interrupt blocked
+[    0.388573] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
+[    0.388575] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
+[    0.388577] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
+[    0.388578] ACPI: Interpreter enabled
+[    0.388595] ACPI: (supports S0 S3 S5)
+[    0.388596] ACPI: Using IOAPIC for interrupt routing
+[    0.388621] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
+[    0.393460] acpi ACPI0003:01: ACPI dock station (docks/bays count: 1)
+[    0.393619] ACPI: Power Resource [FPWR] (off)
+[    0.393970] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
+[    0.393970] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
+[    0.393976] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR]
+[    0.394030] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6dff])
+[    0.394061] PCI host bridge to bus 0000:00
+[    0.394064] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
+[    0.394065] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
+[    0.394067] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
+[    0.394068] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
+[    0.394070] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
+[    0.394072] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
+[    0.394073] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
+[    0.394075] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
+[    0.394076] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
+[    0.394077] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
+[    0.394078] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
+[    0.394079] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
+[    0.394080] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
+[    0.394082] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
+[    0.394083] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
+[    0.394084] pci_bus 0000:00: root bus resource [mem 0xc4000000-0xfebfffff window]
+[    0.394085] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
+[    0.394087] pci_bus 0000:00: root bus resource [bus 00-ff]
+[    0.394097] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
+[    0.394206] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
+[    0.394217] pci 0000:00:02.0: reg 0x10: [mem 0xcf800000-0xcfbfffff 64bit]
+[    0.394223] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
+[    0.394227] pci 0000:00:02.0: reg 0x20: [io  0x1840-0x1847]
+[    0.394338] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
+[    0.394368] pci 0000:00:16.0: reg 0x10: [mem 0xcfd2a000-0xcfd2a00f 64bit]
+[    0.394457] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
+[    0.394533] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
+[    0.394553] pci 0000:00:19.0: reg 0x10: [mem 0xcfd00000-0xcfd1ffff]
+[    0.394561] pci 0000:00:19.0: reg 0x14: [mem 0xcfd24000-0xcfd24fff]
+[    0.394568] pci 0000:00:19.0: reg 0x18: [io  0x1800-0x181f]
+[    0.394626] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
+[    0.394691] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
+[    0.394713] pci 0000:00:1a.0: reg 0x10: [mem 0xcfd27000-0xcfd273ff]
+[    0.394792] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
+[    0.394980] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
+[    0.394980] pci 0000:00:1b.0: reg 0x10: [mem 0xcfd20000-0xcfd23fff 64bit]
+[    0.394980] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
+[    0.395050] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
+[    0.395125] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
+[    0.395210] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
+[    0.395281] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
+[    0.395368] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
+[    0.395439] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
+[    0.395523] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
+[    0.395600] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
+[    0.395689] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
+[    0.395710] pci 0000:00:1d.0: reg 0x10: [mem 0xcfd28000-0xcfd283ff]
+[    0.395787] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
+[    0.395981] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
+[    0.395981] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100
+[    0.396161] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
+[    0.396185] pci 0000:00:1f.2: reg 0x10: [io  0x1848-0x184f]
+[    0.396194] pci 0000:00:1f.2: reg 0x14: [io  0x1858-0x185b]
+[    0.396203] pci 0000:00:1f.2: reg 0x18: [io  0x1850-0x1857]
+[    0.396212] pci 0000:00:1f.2: reg 0x1c: [io  0x185c-0x185f]
+[    0.396220] pci 0000:00:1f.2: reg 0x20: [io  0x1820-0x183f]
+[    0.396229] pci 0000:00:1f.2: reg 0x24: [mem 0xcfd26000-0xcfd267ff]
+[    0.396282] pci 0000:00:1f.2: PME# supported from D3hot
+[    0.396363] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
+[    0.396380] pci 0000:00:1f.3: reg 0x10: [mem 0xcfd29000-0xcfd290ff 64bit]
+[    0.396399] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
+[    0.396491] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
+[    0.396514] pci 0000:00:1f.6: reg 0x10: [mem 0xcfd25000-0xcfd25fff 64bit]
+[    0.396665] pci 0000:00:1c.0: PCI bridge to [bus 01]
+[    0.396708] pci 0000:00:1c.1: PCI bridge to [bus 02]
+[    0.396750] pci 0000:00:1c.3: PCI bridge to [bus 03]
+[    0.396974] pci 0000:04:00.0: [168c:002a] type 00 class 0x028000
+[    0.396974] pci 0000:04:00.0: reg 0x10: [mem 0xcfc00000-0xcfc0ffff 64bit]
+[    0.396974] pci 0000:04:00.0: supports D1
+[    0.396974] pci 0000:04:00.0: PME# supported from D0 D1 D3hot
+[    0.397032] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
+[    0.397041] pci 0000:00:1c.4: PCI bridge to [bus 04]
+[    0.397046] pci 0000:00:1c.4:   bridge window [mem 0xcfc00000-0xcfcfffff]
+[    0.397065] pci_bus 0000:05: extended config space not accessible
+[    0.397113] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
+[    0.397122] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
+[    0.397123] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
+[    0.397124] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
+[    0.397126] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
+[    0.397127] pci 0000:00:1e.0:   bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
+[    0.397128] pci 0000:00:1e.0:   bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
+[    0.397129] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
+[    0.397130] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
+[    0.397131] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
+[    0.397133] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
+[    0.397134] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
+[    0.397135] pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
+[    0.397136] pci 0000:00:1e.0:   bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
+[    0.397137] pci 0000:00:1e.0:   bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
+[    0.397138] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
+[    0.397140] pci 0000:00:1e.0:   bridge window [mem 0xc4000000-0xfebfffff window] (subtractive decode)
+[    0.397141] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
+[    0.397164] pci_bus 0000:00: on NUMA node 0
+[    0.388971] ACPI: Enabled 2 GPEs in block 00 to 3F
+[    0.397276] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
+[    0.397324] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
+[    0.397370] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
+[    0.397415] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
+[    0.397461] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
+[    0.397506] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
+[    0.397551] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
+[    0.397597] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
+[    0.398427] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
+[    0.398432] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
+[    0.398461] PCI host bridge to bus 0000:ff
+[    0.398462] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
+[    0.398465] pci_bus 0000:ff: root bus resource [bus ff]
+[    0.398470] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
+[    0.398517] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
+[    0.398579] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
+[    0.398621] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
+[    0.398660] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
+[    0.398700] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
+[    0.398747] pci_bus 0000:ff: on NUMA node 0
+[    0.399151] ACPI: EC: interrupt unblocked
+[    0.399159] ACPI: EC: event unblocked
+[    0.399164] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
+[    0.399166] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events
+[    0.399285] pci 0000:00:02.0: vgaarb: setting as boot VGA device
+[    0.399285] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
+[    0.399285] pci 0000:00:02.0: vgaarb: bridge control possible
+[    0.399285] vgaarb: loaded
+[    0.399285] SCSI subsystem initialized
+[    0.399285] libata version 3.00 loaded.
+[    0.399285] ACPI: bus type USB registered
+[    0.399285] usbcore: registered new interface driver usbfs
+[    0.399285] usbcore: registered new interface driver hub
+[    0.399285] usbcore: registered new device driver usb
+[    0.399285] pps_core: LinuxPPS API ver. 1 registered
+[    0.399285] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+[    0.399285] PTP clock support registered
+[    0.399285] Advanced Linux Sound Architecture Driver Initialized.
+[    0.399306] PCI: Using ACPI for IRQ routing
+[    0.408302] PCI: pci_cache_line_size set to 64 bytes
+[    0.408356] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
+[    0.408358] e820: reserve RAM buffer [mem 0xbf73b000-0xbfffffff]
+[    0.408512] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
+[    0.408512] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
+[    0.410017] clocksource: Switched to clocksource tsc-early
+[    0.410052] pnp: PnP ACPI init
+[    0.410142] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
+[    0.410146] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
+[    0.410149] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
+[    0.410151] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
+[    0.410152] system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
+[    0.410154] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
+[    0.410155] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
+[    0.410157] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
+[    0.410158] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
+[    0.410160] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
+[    0.410167] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
+[    0.410657] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
+[    0.410666] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
+[    0.410708] system 00:02: [io  0x0500-0x057f] has been reserved
+[    0.410710] system 00:02: [io  0x0480-0x04bf] has been reserved
+[    0.410715] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
+[    0.410736] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
+[    0.410769] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
+[    0.410796] pnp 00:05: Plug and Play ACPI device, IDs LEN0018 PNP0f13 (active)
+[    0.410821] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
+[    0.410979] pnp: PnP ACPI: found 7 devices
+[    0.412755] thermal_sys: Registered thermal governor 'step_wise'
+[    0.412757] thermal_sys: Registered thermal governor 'user_space'
+[    0.417300] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
+[    0.417315] pci 0000:00:1c.0: PCI bridge to [bus 01]
+[    0.417328] pci 0000:00:1c.1: PCI bridge to [bus 02]
+[    0.417340] pci 0000:00:1c.3: PCI bridge to [bus 03]
+[    0.417349] pci 0000:00:1c.4: PCI bridge to [bus 04]
+[    0.417353] pci 0000:00:1c.4:   bridge window [mem 0xcfc00000-0xcfcfffff]
+[    0.417360] pci 0000:00:1e.0: PCI bridge to [bus 05]
+[    0.417370] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
+[    0.417372] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
+[    0.417373] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
+[    0.417375] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
+[    0.417376] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
+[    0.417377] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
+[    0.417378] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
+[    0.417380] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
+[    0.417381] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
+[    0.417382] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
+[    0.417383] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
+[    0.417384] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
+[    0.417385] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
+[    0.417387] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
+[    0.417388] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
+[    0.417389] pci_bus 0000:00: resource 19 [mem 0xc4000000-0xfebfffff window]
+[    0.417390] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
+[    0.417392] pci_bus 0000:04: resource 1 [mem 0xcfc00000-0xcfcfffff]
+[    0.417393] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
+[    0.417395] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
+[    0.417396] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
+[    0.417397] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff window]
+[    0.417399] pci_bus 0000:05: resource 8 [mem 0x000c8000-0x000cbfff window]
+[    0.417400] pci_bus 0000:05: resource 9 [mem 0x000cc000-0x000cffff window]
+[    0.417401] pci_bus 0000:05: resource 10 [mem 0x000d0000-0x000d3fff window]
+[    0.417402] pci_bus 0000:05: resource 11 [mem 0x000d4000-0x000d7fff window]
+[    0.417403] pci_bus 0000:05: resource 12 [mem 0x000d8000-0x000dbfff window]
+[    0.417404] pci_bus 0000:05: resource 13 [mem 0x000dc000-0x000dffff window]
+[    0.417405] pci_bus 0000:05: resource 14 [mem 0x000e0000-0x000e3fff window]
+[    0.417406] pci_bus 0000:05: resource 15 [mem 0x000e4000-0x000e7fff window]
+[    0.417407] pci_bus 0000:05: resource 16 [mem 0x000e8000-0x000ebfff window]
+[    0.417409] pci_bus 0000:05: resource 17 [mem 0x000ec000-0x000effff window]
+[    0.417410] pci_bus 0000:05: resource 18 [mem 0x000f0000-0x000fffff window]
+[    0.417411] pci_bus 0000:05: resource 19 [mem 0xc4000000-0xfebfffff window]
+[    0.417412] pci_bus 0000:05: resource 20 [mem 0xfed40000-0xfed44fff window]
+[    0.417497] NET: Registered protocol family 2
+[    0.417613] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
+[    0.417645] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
+[    0.417811] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
+[    0.418113] TCP: Hash tables configured (established 65536 bind 65536)
+[    0.418158] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
+[    0.418214] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
+[    0.418303] NET: Registered protocol family 1
+[    0.418433] RPC: Registered named UNIX socket transport module.
+[    0.418434] RPC: Registered udp transport module.
+[    0.418435] RPC: Registered tcp transport module.
+[    0.418435] RPC: Registered tcp NFSv4.1 backchannel transport module.
+[    0.418634] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
+[    0.419003] PCI: CLS 64 bytes, default 64
+[    0.419042] Unpacking initramfs...
+[    0.822660] Freeing initrd memory: 3416K
+[    0.822669] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
+[    0.822670] software IO TLB: mapped [mem 0xbb73b000-0xbf73b000] (64MB)
+[    0.823622] Initialise system trusted keyrings
+[    0.823656] workingset: timestamp_bits=62 max_order=21 bucket_order=0
+[    0.826057] NFS: Registering the id_resolver key type
+[    0.826066] Key type id_resolver registered
+[    0.826067] Key type id_legacy registered
+[    0.826113] SGI XFS with security attributes, no debug enabled
+[    0.830561] Key type asymmetric registered
+[    0.830562] Asymmetric key parser 'x509' registered
+[    0.830574] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
+[    0.830897] pcieport 0000:00:1c.0: PME: Signaling with IRQ 24
+[    0.831101] pcieport 0000:00:1c.1: PME: Signaling with IRQ 25
+[    0.831291] pcieport 0000:00:1c.3: PME: Signaling with IRQ 26
+[    0.831475] pcieport 0000:00:1c.4: PME: Signaling with IRQ 27
+[    0.831562] intel_idle: MWAIT substates: 0x1120
+[    0.831564] intel_idle: v0.4.1 model 0x25
+[    0.831734] intel_idle: lapic_timer_reliable_states 0xffffffff
+[    0.832094] ACPI: AC Adapter [AC] (on-line)
+[    0.832123] ACPI Error: AE_NOT_FOUND, Error reading AC Adapter state (20190816/ac-115)
+[    0.832182] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1c/PNP0C09:00/PNP0C0E:00/input/input0
+[    0.832257] ACPI: Sleep Button [SLPB]
+[    0.832348] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1c/PNP0C09:00/PNP0C0D:00/input/input1
+[    0.832397] ACPI: Lid Switch [LID]
+[    0.832448] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
+[    0.832496] ACPI: Power Button [PWRF]
+[    0.833834] thermal LNXTHERM:00: registered as thermal_zone0
+[    0.833836] ACPI: Thermal Zone [THM0] (40 C)
+[    0.834857] thermal LNXTHERM:01: registered as thermal_zone1
+[    0.834859] ACPI: Thermal Zone [THM1] (27 C)
+[    0.834958] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+[    0.835690] Non-volatile memory driver v1.3
+[    0.835692] Linux agpgart interface v0.103
+[    0.836129] pci 0000:00:00.0: Intel HD Graphics Chipset
+[    0.836152] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
+[    0.836660] pci 0000:00:00.0: detected 32768K stolen memory
+[    0.836784] i915 0000:00:02.0: vgaarb: deactivate vga console
+[    0.849403] battery: ACPI: Battery Slot [BAT0] (battery present)
+[    0.849684] battery: ACPI: Battery Slot [BAT1] (battery absent)
+[    0.837600] Console: switching to colour dummy device 80x25
+[    0.890374] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
+[    0.890377] [drm] Driver supports precise vblank timestamp query.
+[    0.890668] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
+[    0.924902] [drm] RC6 disabled, disabling runtime PM support
+[    0.925753] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
+[    0.925890] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
+[    0.933006] acpi device:25: registered as cooling_device5
+[    0.933054] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
+[    0.934493] loop: module loaded
+[    0.934599] ahci 0000:00:1f.2: version 3.0
+[    0.934774] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
+[    0.934796] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3 impl SATA mode
+[    0.934799] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
+[    0.935283] scsi host0: ahci
+[    0.935416] scsi host1: ahci
+[    0.935511] scsi host2: ahci
+[    0.935604] scsi host3: ahci
+[    0.935700] scsi host4: ahci
+[    0.935795] scsi host5: ahci
+[    0.935857] ata1: SATA max UDMA/133 abar m2048@0xcfd26000 port 0xcfd26100 irq 29
+[    0.935860] ata2: SATA max UDMA/133 abar m2048@0xcfd26000 port 0xcfd26180 irq 29
+[    0.935862] ata3: DUMMY
+[    0.935863] ata4: DUMMY
+[    0.935864] ata5: DUMMY
+[    0.935865] ata6: DUMMY
+[    0.935908] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
+[    0.935909] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
+[    0.936042] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
+[    0.950311] fbcon: i915drmfb (fb0) is primary device
+[    1.091388] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:26:2d:fb:7f:aa
+[    1.091394] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
+[    1.091451] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
+[    1.246286] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
+[    1.248252] ata1.00: supports DRM functions and may not be fully accessible
+[    1.248689] ata1.00: NCQ Send/Recv Log not supported
+[    1.248691] ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0BB6Q, max UDMA/133
+[    1.248692] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
+[    1.249483] ata1.00: supports DRM functions and may not be fully accessible
+[    1.249912] ata1.00: NCQ Send/Recv Log not supported
+[    1.250296] ata1.00: configured for UDMA/133
+[    1.522654] ath: EEPROM regdomain: 0x0
+[    1.522656] ath: EEPROM indicates default country code should be used
+[    1.522656] ath: doing EEPROM country->regdmn map search
+[    1.522657] ath: country maps to regdmn code: 0x3a
+[    1.522658] ath: Country alpha2 being used: US
+[    1.522659] ath: Regpair used: 0x3a
+[    1.528590] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
+[    1.528851] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
+[    1.528853] cfg80211: failed to load regulatory.db
+[    1.528885] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc900004f0000, irq=16
+[    1.528946] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+[    1.528948] ehci-pci: EHCI PCI platform driver
+[    1.529082] ehci-pci 0000:00:1a.0: EHCI Host Controller
+[    1.529090] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
+[    1.529102] ehci-pci 0000:00:1a.0: debug port 2
+[    1.533013] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
+[    1.533027] ehci-pci 0000:00:1a.0: irq 19, io mem 0xcfd27000
+[    1.540066] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
+[    1.540200] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
+[    1.540202] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+[    1.540204] usb usb1: Product: EHCI Host Controller
+[    1.540205] usb usb1: Manufacturer: Linux 5.4.44-rt26 ehci_hcd
+[    1.540206] usb usb1: SerialNumber: 0000:00:1a.0
+[    1.540478] hub 1-0:1.0: USB hub found
+[    1.540492] hub 1-0:1.0: 2 ports detected
+[    1.540725] ehci-pci 0000:00:1d.0: EHCI Host Controller
+[    1.540731] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
+[    1.540741] ehci-pci 0000:00:1d.0: debug port 2
+[    1.544638] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
+[    1.544649] ehci-pci 0000:00:1d.0: irq 18, io mem 0xcfd28000
+[    1.551094] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
+[    1.551154] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
+[    1.551157] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+[    1.551160] usb usb2: Product: EHCI Host Controller
+[    1.551162] usb usb2: Manufacturer: Linux 5.4.44-rt26 ehci_hcd
+[    1.551164] usb usb2: SerialNumber: 0000:00:1d.0
+[    1.551315] hub 2-0:1.0: USB hub found
+[    1.551325] hub 2-0:1.0: 2 ports detected
+[    1.551496] usbcore: registered new interface driver usb-storage
+[    1.551521] usbcore: registered new interface driver usbserial_generic
+[    1.551530] usbserial: USB Serial support registered for generic
+[    1.551541] usbcore: registered new interface driver ftdi_sio
+[    1.551549] usbserial: USB Serial support registered for FTDI USB Serial Device
+[    1.551582] usbcore: registered new interface driver mct_u232
+[    1.551591] usbserial: USB Serial support registered for MCT U232
+[    1.551603] usbcore: registered new interface driver pl2303
+[    1.551613] usbserial: USB Serial support registered for pl2303
+[    1.551666] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
+[    1.554995] serio: i8042 KBD port at 0x60,0x64 irq 1
+[    1.555025] serio: i8042 AUX port at 0x60,0x64 irq 12
+[    1.555112] mousedev: PS/2 mouse device common for all mice
+[    1.555537] rtc_cmos 00:03: RTC can wake from S4
+[    1.555792] rtc_cmos 00:03: registered as rtc0
+[    1.555794] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
+[    1.555939] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
+[    1.556364] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
+[    1.556421] usbcore: registered new interface driver usbhid
+[    1.556422] usbhid: USB HID core driver
+[    1.556485] thinkpad_acpi: ThinkPad ACPI Extras v0.26
+[    1.556486] thinkpad_acpi: http://ibm-acpi.sf.net/
+[    1.556486] thinkpad_acpi: ThinkPad BIOS CBET4000 4.12-284-g165efa1b86, EC 6QHT34WW-3.18
+[    1.556487] thinkpad_acpi: Lenovo ThinkPad X201, model 3626F7U
+[    1.556655] random: fast init done
+[    1.557254] thinkpad_acpi: radio switch found; radios are enabled
+[    1.557403] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
+[    1.557415] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
+[    1.557416] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
+[    1.559486] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
+[    1.562832] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
+[    1.562834] thinkpad_acpi: volume: disabled as there is no ALSA support in this kernel
+[    1.565885] thinkpad_acpi: battery 1 registered (start 0, stop 100)
+[    1.565890] battery: new extension: ThinkPad Battery Extension
+[    1.565930] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
+[    1.566346] usbcore: registered new interface driver snd-usb-audio
+[    1.566573] NET: Registered protocol family 10
+[    1.567199] Segment Routing with IPv6
+[    1.567301] NET: Registered protocol family 17
+[    1.567317] 8021q: 802.1Q VLAN Support v1.8
+[    1.567407] Key type dns_resolver registered
+[    1.567836] microcode: sig=0x20652, pf=0x10, revision=0x11
+[    1.567908] microcode: Microcode Update Driver: v2.2.
+[    1.567913] IPI shorthand broadcast: enabled
+[    1.567921] SSE version of gcm_enc/dec engaged.
+[    1.568049] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
+[    1.568644] sched_clock: Marking stable (1566167438, 2474753)->(1573232551, -4590360)
+[    1.568741] registered taskstats version 1
+[    1.568743] Loading compiled-in X.509 certificates
+[    1.569202] cfg80211: Loading compiled-in X.509 certificates for regulatory database
+[    1.569735] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
+[    1.569741] ALSA device list:
+[    1.569743]   No soundcards found.
+[    1.854000] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops 0xffffffff81e7e1e0)
+[    1.853883] Console: switching to colour frame buffer device 160x50
+[    1.861991] tsc: Refined TSC clocksource calibration: 2527.000 MHz
+[    1.861999] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x246cdbae981, max_idle_ns: 440795219599 ns
+[    1.862034] clocksource: Switched to clocksource tsc
+[    1.863995] usb 1-1: new high-speed USB device number 2 using ehci-pci
+[    1.864453] snd_hda_codec_conexant hdaudioC0D0: CX20585: BIOS auto-probing.
+[    1.864929] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20585: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
+[    1.864934] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
+[    1.864937] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
+[    1.864940] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
+[    1.864942] snd_hda_codec_conexant hdaudioC0D0:    inputs:
+[    1.864944] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x23
+[    1.864947] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x1b
+[    1.864949] snd_hda_codec_conexant hdaudioC0D0:      Dock Mic=0x1a
+[    1.869158] snd_hda_codec_generic hdaudioC0D3: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
+[    1.869163] snd_hda_codec_generic hdaudioC0D3:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
+[    1.869165] snd_hda_codec_generic hdaudioC0D3:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
+[    1.869168] snd_hda_codec_generic hdaudioC0D3:    mono: mono_out=0x0
+[    1.869170] snd_hda_codec_generic hdaudioC0D3:    dig-out=0x5/0x0
+[    1.869172] snd_hda_codec_generic hdaudioC0D3:    inputs:
+[    1.870524] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
+[    1.870623] input: HDA Intel MID Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
+[    1.870796] input: HDA Intel MID Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
+[    1.870872] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
+[    1.870934] input: HDA Intel MID HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
+[    1.871989] usb 2-1: new high-speed USB device number 2 using ehci-pci
+[    1.873936] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
+[    1.874265] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 840  BB6Q PQ: 0 ANSI: 5
+[    1.874490] sd 0:0:0:0: Attached scsi generic sg0 type 0
+[    1.874565] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
+[    1.874577] sd 0:0:0:0: [sda] Write Protect is off
+[    1.874579] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
+[    1.874595] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+[    1.878013]  sda: sda1 sda2
+[    1.878395] sd 0:0:0:0: [sda] Attached SCSI disk
+[    1.992383] usb 1-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
+[    1.992389] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
+[    1.992766] hub 1-1:1.0: USB hub found
+[    1.992816] hub 1-1:1.0: 6 ports detected
+[    2.000474] usb 2-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
+[    2.000480] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
+[    2.000753] hub 2-1:1.0: USB hub found
+[    2.000823] hub 2-1:1.0: 8 ports detected
+[    2.180749] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
+[    2.183331] ata2.00: ATAPI: HL-DT-ST DVDRAM GU40N, QX20, max UDMA/133
+[    2.186314] ata2.00: configured for UDMA/133
+[    2.188346] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GU40N     QX20 PQ: 0 ANSI: 5
+[    2.231596] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
+[    2.231599] cdrom: Uniform CD-ROM driver Revision: 3.20
+[    2.231758] sr 1:0:0:0: Attached scsi CD-ROM sr0
+[    2.231857] sr 1:0:0:0: Attached scsi generic sg1 type 5
+[    2.232396] Freeing unused kernel image memory: 904K
+[    2.239098] Write protecting the kernel read-only data: 18432k
+[    2.239963] Freeing unused kernel image memory: 2012K
+[    2.240492] Freeing unused kernel image memory: 1248K
+[    2.240555] rodata_test: all tests were successful
+[    2.240584] Run /init as init process
+[    2.262987] usb 1-1.5: new high-speed USB device number 3 using ehci-pci
+[    2.279988] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
+[    2.341349] usb 1-1.5: New USB device found, idVendor=17ef, idProduct=1005, bcdDevice= 0.01
+[    2.341355] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
+[    2.341603] hub 1-1.5:1.0: USB hub found
+[    2.341686] hub 1-1.5:1.0: 4 ports detected
+[    2.373412] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4810]
+[    2.453582] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 615624
+[    2.453600] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
+[    2.504772] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
+[    2.608469] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0159, bcdDevice=58.88
+[    2.608477] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+[    2.608480] usb 2-1.1: Product: USB2.0-CRW
+[    2.608483] usb 2-1.1: Manufacturer: Generic
+[    2.608490] usb 2-1.1: SerialNumber: 20071114173400000
+[    2.613399] usb-storage 2-1.1:1.0: USB Mass Storage device detected
+[    2.613558] scsi host6: usb-storage 2-1.1:1.0
+[    2.678986] usb 2-1.4: new high-speed USB device number 4 using ehci-pci
+[    2.759700] usb 2-1.4: New USB device found, idVendor=12d1, idProduct=15c1, bcdDevice= 1.02
+[    2.759706] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+[    2.759709] usb 2-1.4: Product: HUAWEI Mobile V7R11
+[    2.759711] usb 2-1.4: Manufacturer: Huawei Technologies Co., Ltd.
+[    2.759713] usb 2-1.4: SerialNumber: 0123456789ABCDEF
+[    2.808333] random: lvm: uninitialized urandom read (4 bytes read)
+[    2.848036] random: lvm: uninitialized urandom read (4 bytes read)
+[    2.878923] random: lvm: uninitialized urandom read (4 bytes read)
+[    3.261634] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
+[    3.520089] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input14
+[    3.656542] scsi 6:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
+[    3.656735] sd 6:0:0:0: Attached scsi generic sg2 type 0
+[    5.284448] random: crng init done
+[   10.762479] usb 2-1.1: USB disconnect, device number 3
+[   10.770089] sd 6:0:0:0: [sdb] Attached SCSI removable disk
+[   10.919883] XFS (dm-5): Mounting V4 Filesystem
+[   10.988724] XFS (dm-5): Ending clean mount
+[   12.792351] udevd[3779]: starting version 3.2.9
+[   12.856931] udevd[3779]: starting eudev-3.2.9
+[   12.968652] usbcore: registered new interface driver option
+[   12.968669] usbserial: USB Serial support registered for GSM modem (1-port)
+[   13.080558] option 2-1.4:2.2: GSM modem (1-port) converter detected
+[   13.080740] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB0
+[   13.080832] option 2-1.4:2.3: GSM modem (1-port) converter detected
+[   13.081015] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB1
+[   13.081093] option 2-1.4:2.4: GSM modem (1-port) converter detected
+[   13.081178] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB2
+[   13.081224] option 2-1.4:2.5: GSM modem (1-port) converter detected
+[   13.081287] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB3
+[   13.081332] option 2-1.4:2.6: GSM modem (1-port) converter detected
+[   13.081390] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB4
+[   14.126700] xfs filesystem being remounted at / supports timestamps until 2038 (0x7fffffff)
+[   14.333723] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
+[   14.346876] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
+[   14.352231] XFS (dm-6): Mounting V5 Filesystem
+[   14.409340] XFS (dm-6): Ending clean mount
+[   14.440296] xfs filesystem being mounted at /home supports timestamps until 2038 (0x7fffffff)
+[   14.456302] XFS (dm-9): Mounting V5 Filesystem
+[   14.668474] XFS (dm-9): Ending clean mount
+[   14.686698] xfs filesystem being mounted at /home/stefan/documents supports timestamps until 2038 (0x7fffffff)
+[   14.692225] XFS (dm-7): Mounting V5 Filesystem
+[   14.773959] XFS (dm-7): Ending clean mount
+[   14.784724] xfs filesystem being mounted at /opt/games supports timestamps until 2038 (0x7fffffff)
+[   17.730791] broken atomic modeset userspace detected, disabling atomic
+[   18.472398] wlan0: authenticate with 04:f0:21:3b:fc:7a
+[   18.491787] wlan0: send auth to 04:f0:21:3b:fc:7a (try 1/3)
+[   18.493691] wlan0: authenticated
+[   18.495039] wlan0: associate with 04:f0:21:3b:fc:7a (try 1/3)
+[   18.497104] wlan0: RX AssocResp from 04:f0:21:3b:fc:7a (capab=0x11 status=0 aid=2)
+[   18.497292] wlan0: associated
+[   18.513131] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
+[   19.458557] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
+[   19.458610] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
+[   19.967712] wlan0: deauthenticating from 04:f0:21:3b:fc:7a by local choice (Reason: 3=DEAUTH_LEAVING)
+[  150.585010] NFS: bad mount option value specified: minorversion=1
+[14482.562604] ACPI: \_SB_.DOCK: undocking
+[14482.564239] ACPI: \_SB_.DOCK: No _EJ0 support for device
+[14482.790881] usb 1-1.5: USB disconnect, device number 3
+[14483.066603] PM: suspend entry (deep)
+[14483.076353] Filesystems sync: 0.009 seconds
+[14483.076575] Freezing user space processes ... (elapsed 0.001 seconds) done.
+[14483.078012] OOM killer disabled.
+[14483.078014] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
+[14483.079218] printk: Suspending console(s) (use no_console_suspend to debug)
+[14483.252601] sd 0:0:0:0: [sda] Synchronizing SCSI cache
+[14483.253818] sd 0:0:0:0: [sda] Stopping disk
+[14483.304642] e1000e: EEE TX LPI TIMER: 00000000
+[14483.892979] ACPI: EC: interrupt blocked
+[14483.916623] ACPI: Preparing to enter system sleep state S3
+[14483.927709] ACPI: EC: event blocked
+[14483.927711] ACPI: EC: EC stopped
+[14483.927711] PM: Saving platform NVS memory
+[14483.927713] Disabling non-boot CPUs ...
+[14483.929126] smpboot: CPU 1 is now offline
+[14483.930832] smpboot: CPU 2 is now offline
+[14483.932503] smpboot: CPU 3 is now offline
+[14483.933546] ACPI: Low-level resume complete
+[14483.933591] ACPI: EC: EC started
+[14483.933592] PM: Restoring platform NVS memory
+[14483.933921] Enabling non-boot CPUs ...
+[14483.933959] x86: Booting SMP configuration:
+[14483.933960] smpboot: Booting Node 0 Processor 1 APIC 0x1
+[14483.936728] CPU1 is up
+[14483.936749] smpboot: Booting Node 0 Processor 2 APIC 0x4
+[14483.939457] CPU2 is up
+[14483.939479] smpboot: Booting Node 0 Processor 3 APIC 0x5
+[14483.942205] CPU3 is up
+[14483.943916] ACPI: Waking up from system sleep state S3
+[14483.952817] ACPI: EC: interrupt unblocked
+[14483.952822] pci 0000:00:16.0: Refused to change power state, currently in D3
+[14484.015340] ACPI: EC: event unblocked
+[14484.016714] sd 0:0:0:0: [sda] Starting disk
+[14484.325389] ata2: SATA link down (SStatus 0 SControl 300)
+[14484.726071] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4810]
+[14489.799503] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
+[14489.801500] ata1.00: supports DRM functions and may not be fully accessible
+[14489.801982] ata1.00: NCQ Send/Recv Log not supported
+[14489.803032] ata1.00: supports DRM functions and may not be fully accessible
+[14489.803561] ata1.00: NCQ Send/Recv Log not supported
+[14489.804012] ata1.00: configured for UDMA/133
+[14489.819215] OOM killer enabled.
+[14489.819217] Restarting tasks ... done.
+[14489.842410] video LNXVIDEO:00: Restoring backlight state
+[14489.846458] PM: suspend exit
+[14489.892395] usb 2-1.1: new high-speed USB device number 5 using ehci-pci
+[14489.987628] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0159, bcdDevice=58.88
+[14489.987636] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+[14489.987638] usb 2-1.1: Product: USB2.0-CRW
+[14489.987641] usb 2-1.1: Manufacturer: Generic
+[14489.987643] usb 2-1.1: SerialNumber: 20071114173400000
+[14489.992543] usb-storage 2-1.1:1.0: USB Mass Storage device detected
+[14489.992690] scsi host6: usb-storage 2-1.1:1.0
+[14489.993209] usb 2-1.4: USB disconnect, device number 4
+[14489.993580] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
+[14489.993601] option 2-1.4:2.2: device disconnected
+[14489.993832] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
+[14489.993849] option 2-1.4:2.3: device disconnected
+[14489.994148] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
+[14489.994165] option 2-1.4:2.4: device disconnected
+[14489.994503] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
+[14489.994521] option 2-1.4:2.5: device disconnected
+[14489.994850] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4
+[14489.994867] option 2-1.4:2.6: device disconnected
+[14490.108482] udevd[7150]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/host6/scsi_host/host6/link_power_management_policy} for writing: Permission denied
+[14490.109218] ata2: SATA link down (SStatus 0 SControl 300)
+[14490.166455] usb 2-1.4: new high-speed USB device number 6 using ehci-pci
+[14490.246121] usb 2-1.4: New USB device found, idVendor=12d1, idProduct=15c1, bcdDevice= 1.02
+[14490.246127] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+[14490.246130] usb 2-1.4: Product: HUAWEI Mobile V7R11
+[14490.246132] usb 2-1.4: Manufacturer: Huawei Technologies Co., Ltd.
+[14490.246134] usb 2-1.4: SerialNumber: 0123456789ABCDEF
+[14490.248680] option 2-1.4:2.2: GSM modem (1-port) converter detected
+[14490.248776] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB0
+[14490.249049] option 2-1.4:2.3: GSM modem (1-port) converter detected
+[14490.249115] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB1
+[14490.249401] option 2-1.4:2.4: GSM modem (1-port) converter detected
+[14490.249479] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB2
+[14490.249800] option 2-1.4:2.5: GSM modem (1-port) converter detected
+[14490.249879] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB3
+[14490.250142] option 2-1.4:2.6: GSM modem (1-port) converter detected
+[14490.250202] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB4
+[14491.017915] scsi 6:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
+[14491.018262] sd 6:0:0:0: Attached scsi generic sg2 type 0
+[14492.296050] wlan0: authenticate with 04:f0:21:3b:fc:7a
+[14492.317765] wlan0: send auth to 04:f0:21:3b:fc:7a (try 1/3)
+[14492.319711] wlan0: authenticated
+[14492.320426] wlan0: associate with 04:f0:21:3b:fc:7a (try 1/3)
+[14492.323129] wlan0: RX AssocResp from 04:f0:21:3b:fc:7a (capab=0x11 status=0 aid=1)
+[14492.323331] wlan0: associated
+[14495.741840] ata2: SATA link down (SStatus 0 SControl 300)
+[14495.741854] ata2.00: disabled
+[14495.741878] sr 1:0:0:0: rejecting I/O to offline device
+[14495.741894] ata2.00: detaching (SCSI 1:0:0:0)
+[14498.115353] sd 6:0:0:0: [sdb] Attached SCSI removable disk
+[14502.336391] usb 2-1.1: USB disconnect, device number 5
+[14502.349761] udevd[7147]: inotify_add_watch(7, /dev/sdb, 10) failed: No such file or directory
+[14502.352853] udevd[7153]: inotify_add_watch(7, /dev/sdb, 10) failed: No such file or directory
+[14502.361743] udevd[7147]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/host6/scsi_host/host6/link_power_management_policy} for writing: No such file or directory
+[21575.599480] ACPI: \_SB_.DOCK: undocking
+[21575.601242] ACPI: \_SB_.DOCK: No _EJ0 support for device
+[21576.103279] PM: suspend entry (deep)
+[21576.111551] Filesystems sync: 0.008 seconds
+[21576.111770] Freezing user space processes ... (elapsed 0.001 seconds) done.
+[21576.113390] OOM killer disabled.
+[21576.113393] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
+[21576.114634] printk: Suspending console(s) (use no_console_suspend to debug)
+[21576.286709] sd 0:0:0:0: [sda] Synchronizing SCSI cache
+[21576.289644] sd 0:0:0:0: [sda] Stopping disk
+[21576.333159] wlan0: deauthenticating from 04:f0:21:3b:fc:7a by local choice (Reason: 3=DEAUTH_LEAVING)
+[21576.334078] e1000e: EEE TX LPI TIMER: 00000000
+[21576.928244] ACPI: EC: interrupt blocked
+[21576.951801] ACPI: Preparing to enter system sleep state S3
+[21576.962982] ACPI: EC: event blocked
+[21576.962983] ACPI: EC: EC stopped
+[21576.962984] PM: Saving platform NVS memory
+[21576.962986] Disabling non-boot CPUs ...
+[21576.964431] smpboot: CPU 1 is now offline
+[21576.966212] smpboot: CPU 2 is now offline
+[21576.967919] smpboot: CPU 3 is now offline
+[21576.968866] ACPI: Low-level resume complete
+[21576.968911] ACPI: EC: EC started
+[21576.968911] PM: Restoring platform NVS memory
+[21576.969257] Enabling non-boot CPUs ...
+[21576.969299] x86: Booting SMP configuration:
+[21576.969300] smpboot: Booting Node 0 Processor 1 APIC 0x1
+[21576.972050] CPU1 is up
+[21576.972071] smpboot: Booting Node 0 Processor 2 APIC 0x4
+[21576.974772] CPU2 is up
+[21576.974793] smpboot: Booting Node 0 Processor 3 APIC 0x5
+[21576.977413] CPU3 is up
+[21576.979130] ACPI: Waking up from system sleep state S3
+[21576.988971] ACPI: EC: interrupt unblocked
+[21576.988984] pci 0000:00:16.0: Refused to change power state, currently in D3
+[21577.014985] ACPI: EC: event unblocked
+[21577.015731] sd 0:0:0:0: [sda] Starting disk
+[21577.326476] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
+[21577.429627] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
+[21577.429997] ata1.00: supports DRM functions and may not be fully accessible
+[21577.430568] ata1.00: NCQ Send/Recv Log not supported
+[21577.431638] ata1.00: supports DRM functions and may not be fully accessible
+[21577.432175] ata1.00: NCQ Send/Recv Log not supported
+[21577.432867] ata1.00: configured for UDMA/133
+[21577.799849] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4810]
+[21579.379292] OOM killer enabled.
+[21579.402088] video LNXVIDEO:00: Restoring backlight state
+[21579.405591] PM: suspend exit
+[21579.449544] usb 2-1.1: new high-speed USB device number 7 using ehci-pci
+[21579.541892] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0159, bcdDevice=58.88
+[21579.541899] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+[21579.541903] usb 2-1.1: Product: USB2.0-CRW
+[21579.541906] usb 2-1.1: Manufacturer: Generic
+[21579.541909] usb 2-1.1: SerialNumber: 20071114173400000
+[21579.546925] usb-storage 2-1.1:1.0: USB Mass Storage device detected
+[21579.547121] scsi host6: usb-storage 2-1.1:1.0
+[21579.547603] usb 2-1.4: USB disconnect, device number 6
+[21579.547997] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
+[21579.548023] option 2-1.4:2.2: device disconnected
+[21579.548554] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
+[21579.548583] option 2-1.4:2.3: device disconnected
+[21579.548746] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
+[21579.548764] option 2-1.4:2.4: device disconnected
+[21579.548928] udevd[20252]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/host6/scsi_host/host6/link_power_management_policy} for writing: Permission denied
+[21579.549076] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
+[21579.549105] option 2-1.4:2.5: device disconnected
+[21579.550241] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4
+[21579.550270] option 2-1.4:2.6: device disconnected
+[21579.553565] usb 1-1.5: new high-speed USB device number 4 using ehci-pci
+[21579.632036] usb 1-1.5: New USB device found, idVendor=17ef, idProduct=1005, bcdDevice= 0.01
+[21579.632041] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
+[21579.632319] hub 1-1.5:1.0: USB hub found
+[21579.632460] hub 1-1.5:1.0: 4 ports detected
+[21580.276111] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
+[21580.555418] scsi 6:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
+[21580.555848] sd 6:0:0:0: Attached scsi generic sg1 type 0
+[21579.379294] Restarting tasks ... done.
+[21581.029652] usb 2-1.4: new high-speed USB device number 8 using ehci-pci
+[21581.110150] usb 2-1.4: New USB device found, idVendor=12d1, idProduct=15c1, bcdDevice= 1.02
+[21581.110156] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+[21581.110160] usb 2-1.4: Product: HUAWEI Mobile V7R11
+[21581.110162] usb 2-1.4: Manufacturer: Huawei Technologies Co., Ltd.
+[21581.110165] usb 2-1.4: SerialNumber: 0123456789ABCDEF
+[21581.112959] option 2-1.4:2.2: GSM modem (1-port) converter detected
+[21581.113081] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB0
+[21581.113460] option 2-1.4:2.3: GSM modem (1-port) converter detected
+[21581.113595] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB1
+[21581.113980] option 2-1.4:2.4: GSM modem (1-port) converter detected
+[21581.114088] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB2
+[21581.114466] option 2-1.4:2.5: GSM modem (1-port) converter detected
+[21581.114591] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB3
+[21581.114959] option 2-1.4:2.6: GSM modem (1-port) converter detected
+[21581.115063] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB4
+[21591.280408] usb 2-1.1: USB disconnect, device number 7
+[21591.288615] sd 6:0:0:0: [sdb] Attached SCSI removable disk
+[21591.290981] udevd[20322]: inotify_add_watch(7, /dev/sdb, 10) failed: No such file or directory
+[21591.295864] udevd[20322]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/host6/scsi_host/host6/link_power_management_policy} for writing: No such file or directory
+[21591.297500] udevd[20252]: inotify_add_watch(7, /dev/sdb, 10) failed: No such file or directory
+[23784.099139] ACPI: \_SB_.DOCK: undocking
+[23784.100644] ACPI: \_SB_.DOCK: No _EJ0 support for device
+[23784.329227] usb 1-1.5: USB disconnect, device number 4
+[23784.602513] PM: suspend entry (deep)
+[23784.620593] Filesystems sync: 0.018 seconds
+[23784.620877] Freezing user space processes ... (elapsed 0.001 seconds) done.
+[23784.622237] OOM killer disabled.
+[23784.622240] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
+[23784.623404] printk: Suspending console(s) (use no_console_suspend to debug)
+[23784.800730] sd 0:0:0:0: [sda] Synchronizing SCSI cache
+[23784.803705] sd 0:0:0:0: [sda] Stopping disk
+[23784.849969] e1000e: EEE TX LPI TIMER: 00000000
+[23785.438178] ACPI: EC: interrupt blocked
+[23785.461761] ACPI: Preparing to enter system sleep state S3
+[23785.475355] ACPI: EC: event blocked
+[23785.475355] ACPI: EC: EC stopped
+[23785.475356] PM: Saving platform NVS memory
+[23785.475357] Disabling non-boot CPUs ...
+[23785.476710] smpboot: CPU 1 is now offline
+[23785.478641] smpboot: CPU 2 is now offline
+[23785.480358] smpboot: CPU 3 is now offline
+[23785.481302] ACPI: Low-level resume complete
+[23785.481347] ACPI: EC: EC started
+[23785.481348] PM: Restoring platform NVS memory
+[23785.481676] Enabling non-boot CPUs ...
+[23785.481714] x86: Booting SMP configuration:
+[23785.481715] smpboot: Booting Node 0 Processor 1 APIC 0x1
+[23785.484487] CPU1 is up
+[23785.484509] smpboot: Booting Node 0 Processor 2 APIC 0x4
+[23785.487195] CPU2 is up
+[23785.487218] smpboot: Booting Node 0 Processor 3 APIC 0x5
+[23785.489940] CPU3 is up
+[23785.491652] ACPI: Waking up from system sleep state S3
+[23785.501006] ACPI: EC: interrupt unblocked
+[23785.501011] pci 0000:00:16.0: Refused to change power state, currently in D3
+[23785.527020] ACPI: EC: event unblocked
+[23785.527705] sd 0:0:0:0: [sda] Starting disk
+[23785.839538] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
+[23785.934574] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
+[23785.934854] ata1.00: supports DRM functions and may not be fully accessible
+[23785.935325] ata1.00: NCQ Send/Recv Log not supported
+[23785.936122] ata1.00: supports DRM functions and may not be fully accessible
+[23785.936550] ata1.00: NCQ Send/Recv Log not supported
+[23785.937121] ata1.00: configured for UDMA/133
+[23786.309864] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4810]
+[23787.891896] OOM killer enabled.
+[23787.891897] Restarting tasks ... 
+[23787.920358] video LNXVIDEO:00: Restoring backlight state
+[23787.922622] PM: suspend exit
+[23787.974644] usb 2-1.1: new high-speed USB device number 9 using ehci-pci
+[23788.066372] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0159, bcdDevice=58.88
+[23788.066378] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+[23788.066380] usb 2-1.1: Product: USB2.0-CRW
+[23788.066383] usb 2-1.1: Manufacturer: Generic
+[23788.066385] usb 2-1.1: SerialNumber: 20071114173400000
+[23787.898884] done.
+[23788.066539] usb 1-1.5: new high-speed USB device number 5 using ehci-pci
+[23788.071300] usb-storage 2-1.1:1.0: USB Mass Storage device detected
+[23788.071466] scsi host6: usb-storage 2-1.1:1.0
+[23788.072001] usb 2-1.4: USB disconnect, device number 8
+[23788.072360] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
+[23788.072387] option 2-1.4:2.2: device disconnected
+[23788.072601] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
+[23788.072623] option 2-1.4:2.3: device disconnected
+[23788.072791] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
+[23788.072812] option 2-1.4:2.4: device disconnected
+[23788.072973] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
+[23788.072994] option 2-1.4:2.5: device disconnected
+[23788.073162] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4
+[23788.073183] option 2-1.4:2.6: device disconnected
+[23788.073467] udevd[20774]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/host6/scsi_host/host6/link_power_management_policy} for writing: Permission denied
+[23788.145153] usb 1-1.5: New USB device found, idVendor=17ef, idProduct=1005, bcdDevice= 0.01
+[23788.145160] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
+[23788.145562] hub 1-1.5:1.0: USB hub found
+[23788.145718] hub 1-1.5:1.0: 4 ports detected
+[23789.132216] scsi 6:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
+[23789.132439] sd 6:0:0:0: Attached scsi generic sg1 type 0
+[23789.541655] usb 2-1.4: new high-speed USB device number 10 using ehci-pci
+[23789.622020] usb 2-1.4: New USB device found, idVendor=12d1, idProduct=15c1, bcdDevice= 1.02
+[23789.622026] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+[23789.622029] usb 2-1.4: Product: HUAWEI Mobile V7R11
+[23789.622032] usb 2-1.4: Manufacturer: Huawei Technologies Co., Ltd.
+[23789.622034] usb 2-1.4: SerialNumber: 0123456789ABCDEF
+[23789.624710] option 2-1.4:2.2: GSM modem (1-port) converter detected
+[23789.624827] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB0
+[23789.625214] option 2-1.4:2.3: GSM modem (1-port) converter detected
+[23789.625321] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB1
+[23789.625690] option 2-1.4:2.4: GSM modem (1-port) converter detected
+[23789.625786] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB2
+[23789.626033] option 2-1.4:2.5: GSM modem (1-port) converter detected
+[23789.626105] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB3
+[23789.626402] option 2-1.4:2.6: GSM modem (1-port) converter detected
+[23789.626478] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB4
+[23790.354854] wlan0: authenticate with 04:f0:21:3b:fc:7a
+[23790.375950] wlan0: send auth to 04:f0:21:3b:fc:7a (try 1/3)
+[23790.377822] wlan0: authenticated
+[23790.378575] wlan0: associate with 04:f0:21:3b:fc:7a (try 1/3)
+[23790.380321] wlan0: RX AssocResp from 04:f0:21:3b:fc:7a (capab=0x11 status=0 aid=1)
+[23790.380533] wlan0: associated
+[23790.970053] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
+[23791.893858] wlan0: deauthenticating from 04:f0:21:3b:fc:7a by local choice (Reason: 3=DEAUTH_LEAVING)
+[23796.235857] sd 6:0:0:0: [sdb] Attached SCSI removable disk
+[23799.864275] usb 2-1.1: USB disconnect, device number 9
+[23799.874180] udevd[20776]: inotify_add_watch(7, /dev/sdb, 10) failed: No such file or directory
+[23799.876556] udevd[20774]: inotify_add_watch(7, /dev/sdb, 10) failed: No such file or directory
+[23799.884986] udevd[20776]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/host6/scsi_host/host6/link_power_management_policy} for writing: No such file or directory
+[23801.824376] ACPI: \_SB_.DOCK: undocking
+[23801.826026] ACPI: \_SB_.DOCK: No _EJ0 support for device
+[23802.057904] usb 1-1.5: USB disconnect, device number 5
+[23802.327921] PM: suspend entry (deep)
+[23802.348236] Filesystems sync: 0.020 seconds
+[23802.348427] Freezing user space processes ... (elapsed 0.001 seconds) done.
+[23802.349624] OOM killer disabled.
+[23802.349626] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
+[23802.350634] printk: Suspending console(s) (use no_console_suspend to debug)
+[23802.521632] sd 0:0:0:0: [sda] Synchronizing SCSI cache
+[23802.524600] sd 0:0:0:0: [sda] Stopping disk
+[23802.575474] e1000e: EEE TX LPI TIMER: 00000000
+[23803.169049] ACPI: EC: interrupt blocked
+[23803.192694] ACPI: Preparing to enter system sleep state S3
+[23803.203914] ACPI: EC: event blocked
+[23803.203915] ACPI: EC: EC stopped
+[23803.203916] PM: Saving platform NVS memory
+[23803.203918] Disabling non-boot CPUs ...
+[23803.205378] smpboot: CPU 1 is now offline
+[23803.207282] smpboot: CPU 2 is now offline
+[23803.208966] smpboot: CPU 3 is now offline
+[23803.209842] ACPI: Low-level resume complete
+[23803.209886] ACPI: EC: EC started
+[23803.209887] PM: Restoring platform NVS memory
+[23803.210214] Enabling non-boot CPUs ...
+[23803.210249] x86: Booting SMP configuration:
+[23803.210250] smpboot: Booting Node 0 Processor 1 APIC 0x1
+[23803.213086] CPU1 is up
+[23803.213107] smpboot: Booting Node 0 Processor 2 APIC 0x4
+[23803.215830] CPU2 is up
+[23803.215851] smpboot: Booting Node 0 Processor 3 APIC 0x5
+[23803.218598] CPU3 is up
+[23803.220323] ACPI: Waking up from system sleep state S3
+[23803.229163] ACPI: EC: interrupt unblocked
+[23803.229167] pci 0000:00:16.0: Refused to change power state, currently in D3
+[23803.254846] ACPI: EC: event unblocked
+[23803.255614] sd 0:0:0:0: [sda] Starting disk
+[23803.560296] ata2: SATA link down (SStatus 0 SControl 300)
+[23803.663574] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
+[23803.663852] ata1.00: supports DRM functions and may not be fully accessible
+[23803.664333] ata1.00: NCQ Send/Recv Log not supported
+[23803.665250] ata1.00: supports DRM functions and may not be fully accessible
+[23803.665729] ata1.00: NCQ Send/Recv Log not supported
+[23803.666264] ata1.00: configured for UDMA/133
+[23804.001387] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4810]
+[23805.612637] OOM killer enabled.
+[23805.612639] Restarting tasks ... done.
+[23805.640748] video LNXVIDEO:00: Restoring backlight state
+[23805.643940] PM: suspend exit
+[23805.680465] usb 2-1.1: new high-speed USB device number 11 using ehci-pci
+[23805.771620] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0159, bcdDevice=58.88
+[23805.771625] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+[23805.771627] usb 2-1.1: Product: USB2.0-CRW
+[23805.771629] usb 2-1.1: Manufacturer: Generic
+[23805.771630] usb 2-1.1: SerialNumber: 20071114173400000
+[23805.776331] usb-storage 2-1.1:1.0: USB Mass Storage device detected
+[23805.776461] scsi host6: usb-storage 2-1.1:1.0
+[23805.776867] usb 2-1.4: USB disconnect, device number 10
+[23805.777157] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
+[23805.777177] option 2-1.4:2.2: device disconnected
+[23805.777440] udevd[20774]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/host6/scsi_host/host6/link_power_management_policy} for writing: Permission denied
+[23805.777479] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
+[23805.777493] option 2-1.4:2.3: device disconnected
+[23805.777622] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
+[23805.777637] option 2-1.4:2.4: device disconnected
+[23805.777758] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
+[23805.777768] option 2-1.4:2.5: device disconnected
+[23805.777862] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4
+[23805.777872] option 2-1.4:2.6: device disconnected
+[23806.797162] scsi 6:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
+[23806.797588] sd 6:0:0:0: Attached scsi generic sg1 type 0
+[23807.269515] usb 2-1.4: new high-speed USB device number 12 using ehci-pci
+[23807.350178] usb 2-1.4: New USB device found, idVendor=12d1, idProduct=15c1, bcdDevice= 1.02
+[23807.350182] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+[23807.350185] usb 2-1.4: Product: HUAWEI Mobile V7R11
+[23807.350187] usb 2-1.4: Manufacturer: Huawei Technologies Co., Ltd.
+[23807.350190] usb 2-1.4: SerialNumber: 0123456789ABCDEF
+[23807.352867] option 2-1.4:2.2: GSM modem (1-port) converter detected
+[23807.352992] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB0
+[23807.353382] option 2-1.4:2.3: GSM modem (1-port) converter detected
+[23807.353508] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB1
+[23807.353868] option 2-1.4:2.4: GSM modem (1-port) converter detected
+[23807.353972] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB2
+[23807.354237] option 2-1.4:2.5: GSM modem (1-port) converter detected
+[23807.354336] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB3
+[23807.354582] option 2-1.4:2.6: GSM modem (1-port) converter detected
+[23807.354671] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB4
+[23808.091320] wlan0: authenticate with 04:f0:21:3b:fc:7a
+[23808.112790] wlan0: send auth to 04:f0:21:3b:fc:7a (try 1/3)
+[23808.114650] wlan0: authenticated
+[23808.115488] wlan0: associate with 04:f0:21:3b:fc:7a (try 1/3)
+[23808.117176] wlan0: RX AssocResp from 04:f0:21:3b:fc:7a (capab=0x11 status=0 aid=1)
+[23808.117357] wlan0: associated
+[23813.895215] sd 6:0:0:0: [sdb] Attached SCSI removable disk
+[23818.115714] usb 2-1.1: USB disconnect, device number 11
+[23818.125197] udevd[20776]: inotify_add_watch(7, /dev/sdb, 10) failed: No such file or directory
+[23818.127610] udevd[20775]: inotify_add_watch(7, /dev/sdb, 10) failed: No such file or directory
+[23818.136817] udevd[20776]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/host6/scsi_host/host6/link_power_management_policy} for writing: No such file or directory
+[26648.165270] ACPI: \_SB_.DOCK: undocking
+[26648.166676] ACPI: \_SB_.DOCK: No _EJ0 support for device
+[26648.668518] PM: suspend entry (deep)
+[26648.680001] Filesystems sync: 0.011 seconds
+[26648.680193] Freezing user space processes ... (elapsed 0.001 seconds) done.
+[26648.681621] OOM killer disabled.
+[26648.681624] Freezing remaining freezable tasks ... 
+[26648.682640] (elapsed 0.001 seconds) done.
+[26648.682661] printk: Suspending console(s) (use no_console_suspend to debug)
+[26648.854585] sd 0:0:0:0: [sda] Synchronizing SCSI cache
+[26648.855824] sd 0:0:0:0: [sda] Stopping disk
+[26648.897573] wlan0: deauthenticating from 04:f0:21:3b:fc:7a by local choice (Reason: 3=DEAUTH_LEAVING)
+[26648.898116] e1000e: EEE TX LPI TIMER: 00000000
+[26649.480064] ACPI: EC: interrupt blocked
+[26649.503696] ACPI: Preparing to enter system sleep state S3
+[26649.514901] ACPI: EC: event blocked
+[26649.514902] ACPI: EC: EC stopped
+[26649.514903] PM: Saving platform NVS memory
+[26649.514904] Disabling non-boot CPUs ...
+[26649.516259] smpboot: CPU 1 is now offline
+[26649.518010] smpboot: CPU 2 is now offline
+[26649.519788] smpboot: CPU 3 is now offline
+[26649.520751] ACPI: Low-level resume complete
+[26649.520796] ACPI: EC: EC started
+[26649.520797] PM: Restoring platform NVS memory
+[26649.521134] Enabling non-boot CPUs ...
+[26649.521176] x86: Booting SMP configuration:
+[26649.521177] smpboot: Booting Node 0 Processor 1 APIC 0x1
+[26649.523830] CPU1 is up
+[26649.523852] smpboot: Booting Node 0 Processor 2 APIC 0x4
+[26649.526567] CPU2 is up
+[26649.526588] smpboot: Booting Node 0 Processor 3 APIC 0x5
+[26649.529307] CPU3 is up
+[26649.531016] ACPI: Waking up from system sleep state S3
+[26649.540323] ACPI: EC: interrupt unblocked
+[26649.540330] pci 0000:00:16.0: Refused to change power state, currently in D3
+[26649.565956] ACPI: EC: event unblocked
+[26649.566579] sd 0:0:0:0: [sda] Starting disk
+[26649.873471] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
+[26649.977491] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
+[26649.977742] ata1.00: supports DRM functions and may not be fully accessible
+[26649.978153] ata1.00: NCQ Send/Recv Log not supported
+[26649.979075] ata1.00: supports DRM functions and may not be fully accessible
+[26649.979539] ata1.00: NCQ Send/Recv Log not supported
+[26649.980076] ata1.00: configured for UDMA/133
+[26650.346167] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4810]
+[26651.925911] OOM killer enabled.
+[26651.925913] Restarting tasks ... done.
+[26651.950000] video LNXVIDEO:00: Restoring backlight state
+[26651.952530] PM: suspend exit
+[26651.991497] usb 2-1.1: new high-speed USB device number 13 using ehci-pci
+[26652.081647] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0159, bcdDevice=58.88
+[26652.081654] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+[26652.081656] usb 2-1.1: Product: USB2.0-CRW
+[26652.081658] usb 2-1.1: Manufacturer: Generic
+[26652.081660] usb 2-1.1: SerialNumber: 20071114173400000
+[26652.086564] usb-storage 2-1.1:1.0: USB Mass Storage device detected
+[26652.086768] scsi host6: usb-storage 2-1.1:1.0
+[26652.087270] usb 2-1.4: USB disconnect, device number 12
+[26652.087630] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
+[26652.087661] option 2-1.4:2.2: device disconnected
+[26652.087865] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
+[26652.087881] option 2-1.4:2.3: device disconnected
+[26652.088018] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
+[26652.088035] option 2-1.4:2.4: device disconnected
+[26652.088168] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3
+[26652.088185] option 2-1.4:2.5: device disconnected
+[26652.088351] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4
+[26652.088376] option 2-1.4:2.6: device disconnected
+[26652.088632] udevd[26602]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/host6/scsi_host/host6/link_power_management_policy} for writing: Permission denied
+[26652.100501] usb 1-1.5: new high-speed USB device number 6 using ehci-pci
+[26652.179247] usb 1-1.5: New USB device found, idVendor=17ef, idProduct=1005, bcdDevice= 0.01
+[26652.179252] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
+[26652.179595] hub 1-1.5:1.0: USB hub found
+[26652.179778] hub 1-1.5:1.0: 4 ports detected
+[26653.080031] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
+[26653.134285] scsi 6:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
+[26653.134575] sd 6:0:0:0: Attached scsi generic sg1 type 0
+[26653.580520] usb 2-1.4: new high-speed USB device number 14 using ehci-pci
+[26653.660909] usb 2-1.4: New USB device found, idVendor=12d1, idProduct=15c1, bcdDevice= 1.02
+[26653.660915] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+[26653.660918] usb 2-1.4: Product: HUAWEI Mobile V7R11
+[26653.660921] usb 2-1.4: Manufacturer: Huawei Technologies Co., Ltd.
+[26653.660923] usb 2-1.4: SerialNumber: 0123456789ABCDEF
+[26653.663634] option 2-1.4:2.2: GSM modem (1-port) converter detected
+[26653.663753] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB0
+[26653.664136] option 2-1.4:2.3: GSM modem (1-port) converter detected
+[26653.664239] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB1
+[26653.664416] option 2-1.4:2.4: GSM modem (1-port) converter detected
+[26653.664493] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB2
+[26653.664893] option 2-1.4:2.5: GSM modem (1-port) converter detected
+[26653.664995] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB3
+[26653.665230] option 2-1.4:2.6: GSM modem (1-port) converter detected
+[26653.665284] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB4
+[26660.235148] sd 6:0:0:0: [sdb] Attached SCSI removable disk
+[26663.863730] usb 2-1.1: USB disconnect, device number 13
+[26663.873367] udevd[26694]: inotify_add_watch(7, /dev/sdb, 10) failed: No such file or directory
+[26663.876766] udevd[26708]: inotify_add_watch(7, /dev/sdb, 10) failed: No such file or directory
+[26663.890878] udevd[26708]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/host6/scsi_host/host6/link_power_management_policy} for writing: No such file or directory
+[56257.532594] ACPI: \_SB_.DOCK: undocking
+[56257.534136] ACPI: \_SB_.DOCK: No _EJ0 support for device
+[56257.764849] usb 1-1.5: USB disconnect, device number 6
+[56259.552028] e1000e: eth0 NIC Link is Down
+[56262.469236] wlan0: authenticate with 04:f0:21:3b:fc:7a
+[56262.490955] wlan0: send auth to 04:f0:21:3b:fc:7a (try 1/3)
+[56262.492836] wlan0: authenticated
+[56262.493464] wlan0: associate with 04:f0:21:3b:fc:7a (try 1/3)
+[56262.495503] wlan0: RX AssocResp from 04:f0:21:3b:fc:7a (capab=0x11 status=0 aid=1)
+[56262.495689] wlan0: associated
diff --git a/lenovo/x200/4.12/2020-05-12T10_30_22Z/payload_config.txt b/lenovo/x200/4.12/2020-05-12T10_30_22Z/payload_config.txt
new file mode 100644
index 0000000..f1f4b0a
--- /dev/null
+++ b/lenovo/x200/4.12/2020-05-12T10_30_22Z/payload_config.txt
@@ -0,0 +1,98 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# SeaBIOS Configuration
+#
+
+#
+# General Features
+#
+CONFIG_COREBOOT=y
+# CONFIG_QEMU is not set
+# CONFIG_CSM is not set
+# CONFIG_QEMU_HARDWARE is not set
+CONFIG_THREADS=y
+CONFIG_RELOCATE_INIT=y
+CONFIG_BOOTMENU=y
+CONFIG_BOOTSPLASH=y
+CONFIG_BOOTORDER=y
+CONFIG_HOST_BIOS_GEOMETRY=y
+CONFIG_COREBOOT_FLASH=y
+CONFIG_LZMA=y
+CONFIG_CBFS_LOCATION=0
+CONFIG_MULTIBOOT=y
+CONFIG_ENTRY_EXTRASTACK=y
+CONFIG_MALLOC_UPPERMEMORY=y
+CONFIG_ROM_SIZE=0
+
+#
+# Hardware support
+#
+CONFIG_ATA=y
+# CONFIG_ATA_DMA is not set
+# CONFIG_ATA_PIO32 is not set
+CONFIG_AHCI=y
+CONFIG_SDCARD=y
+CONFIG_MEGASAS=y
+CONFIG_FLOPPY=y
+CONFIG_FLASH_FLOPPY=y
+CONFIG_NVME=y
+CONFIG_PS2PORT=y
+CONFIG_USB=y
+CONFIG_USB_UHCI=y
+CONFIG_USB_OHCI=y
+CONFIG_USB_EHCI=y
+CONFIG_USB_XHCI=y
+CONFIG_USB_MSC=y
+CONFIG_USB_UAS=y
+CONFIG_USB_HUB=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_USB_MOUSE=y
+CONFIG_SERIAL=y
+CONFIG_SERCON=y
+CONFIG_LPT=y
+CONFIG_RTC_TIMER=y
+CONFIG_HARDWARE_IRQ=y
+CONFIG_PMTIMER=y
+CONFIG_TSC_TIMER=y
+
+#
+# BIOS interfaces
+#
+CONFIG_DRIVES=y
+CONFIG_CDROM_BOOT=y
+CONFIG_CDROM_EMU=y
+CONFIG_PCIBIOS=y
+CONFIG_APMBIOS=y
+CONFIG_PNPBIOS=y
+CONFIG_OPTIONROMS=y
+CONFIG_PMM=y
+CONFIG_BOOT=y
+CONFIG_KEYBOARD=y
+CONFIG_KBD_CALL_INT15_4F=y
+CONFIG_MOUSE=y
+CONFIG_S3_RESUME=y
+CONFIG_VGAHOOKS=y
+# CONFIG_DISABLE_A20 is not set
+CONFIG_TCGBIOS=y
+
+#
+# VGA ROM
+#
+# CONFIG_NO_VGABIOS is not set
+# CONFIG_VGA_GEODEGX2 is not set
+# CONFIG_VGA_GEODELX is not set
+CONFIG_VGA_COREBOOT=y
+CONFIG_BUILD_VGABIOS=y
+CONFIG_VGA_EMULATE_TEXT=y
+CONFIG_VGA_FIXUP_ASM=y
+CONFIG_VGA_ALLOCATE_EXTRA_STACK=y
+CONFIG_VGA_EXTRA_STACK_SIZE=512
+CONFIG_VGA_VBE=y
+
+#
+# Debugging
+#
+CONFIG_DEBUG_LEVEL=1
+# CONFIG_DEBUG_SERIAL is not set
+# CONFIG_DEBUG_SERIAL_MMIO is not set
+CONFIG_DEBUG_COREBOOT=y
diff --git a/lenovo/x200/4.12/2020-05-12T10_30_22Z/revision.txt b/lenovo/x200/4.12/2020-05-12T10_30_22Z/revision.txt
new file mode 100644
index 0000000..8148f50
--- /dev/null
+++ b/lenovo/x200/4.12/2020-05-12T10_30_22Z/revision.txt
@@ -0,0 +1,5 @@
+Local revision: f2c32515ee
+Tagged revision: 4.12
+Upstream revision: 56da63c3dc
+Upstream URL: https://review.coreboot.org/coreboot.git
+Timestamp: 2020-05-12T10_30_22Z
diff --git a/lenovo/x200/4.12/2020-05-12T10_30_22Z/rom_checksum.txt b/lenovo/x200/4.12/2020-05-12T10_30_22Z/rom_checksum.txt
new file mode 100644
index 0000000..47ff640
--- /dev/null
+++ b/lenovo/x200/4.12/2020-05-12T10_30_22Z/rom_checksum.txt
@@ -0,0 +1 @@
+709129a31a58132d7aab330f63d4cac7 *build/coreboot.rom