[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.14-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-7) ) #1 SMP Debian 3.14.15-2 (2014-08-09)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.14-2-amd64 root=UUID=7278a628-211f-452e-a4ce-959ca7e8b94a ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bfecffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfed0000-0x00000000bfffffff] type 16
[    0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000c29fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043b5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 4299Y48/4299Y48, BIOS CBET4000 4.0-6835-g8603513 08/30/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x43b600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0C0000000 mask FF0000000 uncachable
[    0.000000]   1 base 0D0000000 mask FF0000000 write-combining
[    0.000000]   2 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xbfed0 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01aaf000, 0x01aaffff] PGTABLE
[    0.000000] BRK [0x01ab0000, 0x01ab0fff] PGTABLE
[    0.000000] BRK [0x01ab1000, 0x01ab1fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x43b400000-0x43b5fffff]
[    0.000000]  [mem 0x43b400000-0x43b5fffff] page 2M
[    0.000000] BRK [0x01ab2000, 0x01ab2fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x438000000-0x43b3fffff]
[    0.000000]  [mem 0x438000000-0x43b3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x400000000-0x437ffffff]
[    0.000000]  [mem 0x400000000-0x437ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40200000-0xbfecffff]
[    0.000000]  [mem 0x40200000-0xbfdfffff] page 2M
[    0.000000]  [mem 0xbfe00000-0xbfecffff] page 4k
[    0.000000] BRK [0x01ab3000, 0x01ab3fff] PGTABLE
[    0.000000] BRK [0x01ab4000, 0x01ab4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[    0.000000]  [mem 0x100000000-0x3ffffffff] page 2M
[    0.000000] RAMDISK: [mem 0x360be000-0x37056fff]
[    0.000000] ACPI: RSDP 00000000000f0000 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 00000000bfee10e0 00004C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 00000000bfee48c0 0000F4 (v03 CORE   COREBOOT 00000000 CORE 00000001)
[    0.000000] ACPI: DSDT 00000000bfee1250 00366E (v02 COREv4 COREBOOT 20110725 INTL 20140724)
[    0.000000] ACPI: FACS 00000000bfee1210 000040
[    0.000000] ACPI: HPET 00000000bfee49c0 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 00000000bfee4a00 00006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: MCFG 00000000bfee4a70 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SSDT 00000000bfee5ab0 00122C (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000043b5fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x43b5fffff]
[    0.000000]   NODE_DATA [mem 0x43b5ee000-0x43b5f2fff]
[    0.000000]  [ffffea0000000000-ffffea000edfffff] PMD -> [ffff88042ac00000-ffff880438bfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x43b5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009ffff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
[    0.000000]   node   0: [mem 0x40200000-0xbfecffff]
[    0.000000]   node   0: [mem 0x100000000-0x43b5fffff]
[    0.000000] On node 0 totalpages: 4173935
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 159 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10678 pages used for memmap
[    0.000000]   DMA32 zone: 781008 pages, LIFO batch:31
[    0.000000]   Normal zone: 46333 pages used for memmap
[    0.000000]   Normal zone: 3388928 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfed0000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xc29fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc2a00000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
[    0.000000] e820: [mem 0xc2a00000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88043b200000 s86080 r8192 d24512 u524288
[    0.000000] pcpu-alloc: s86080 r8192 d24512 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4116709
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14-2-amd64 root=UUID=7278a628-211f-452e-a4ce-959ca7e8b94a ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16371948K/16695740K available (4957K kernel code, 747K rwdata, 1724K rodata, 1008K init, 960K bss, 323792K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:712 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2491.824 MHz processor
[    0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 4983.64 BogoMIPS (lpj=9967296)
[    0.000032] pid_max: default: 32768 minimum: 301
[    0.000038] ACPI: Core revision 20131218
[    0.001976] ACPI: All ACPI Tables successfully acquired
[    0.002087] Security Framework initialized
[    0.002094] AppArmor: AppArmor disabled by boot time parameter
[    0.002095] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.002975] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.006118] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.007478] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.007495] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.007696] Initializing cgroup subsys memory
[    0.007700] Initializing cgroup subsys devices
[    0.007701] Initializing cgroup subsys freezer
[    0.007703] Initializing cgroup subsys net_cls
[    0.007704] Initializing cgroup subsys blkio
[    0.007705] Initializing cgroup subsys perf_event
[    0.007726] CPU: Physical Processor ID: 0
[    0.007727] CPU: Processor Core ID: 0
[    0.007732] mce: CPU supports 7 MCE banks
[    0.007743] CPU0: Thermal monitoring enabled (TM1)
[    0.007751] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.007751] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.007751] tlb_flushall_shift: 6
[    0.007838] Freeing SMP alternatives memory: 20K (ffffffff819b8000 - ffffffff819bd000)
[    0.009657] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.049346] smpboot: CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (fam: 06, model: 2a, stepping: 07)
[    0.049354] TSC deadline timer enabled
[    0.049361] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.049368] ... version:                3
[    0.049369] ... bit width:              48
[    0.049370] ... generic registers:      4
[    0.049371] ... value mask:             0000ffffffffffff
[    0.049372] ... max period:             0000ffffffffffff
[    0.049373] ... fixed-purpose events:   3
[    0.049373] ... event mask:             000000070000000f
[    0.049841] x86: Booting SMP configuration:
[    0.049843] .... node  #0, CPUs:      #1
[    0.063045] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.063135]  #2 #3
[    0.089523] x86: Booted up 1 node, 4 CPUs
[    0.089527] smpboot: Total of 4 processors activated (19934.59 BogoMIPS)
[    0.092566] devtmpfs: initialized
[    0.096410] pinctrl core: initialized pinctrl subsystem
[    0.096465] NET: Registered protocol family 16
[    0.096551] cpuidle: using governor ladder
[    0.096552] cpuidle: using governor menu
[    0.096578] ACPI: bus type PCI registered
[    0.096580] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.096654] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.096657] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.096735] PCI: Using configuration type 1 for base access
[    0.097671] bio: create slab <bio-0> at 0
[    0.097778] ACPI: Added _OSI(Module Device)
[    0.097779] ACPI: Added _OSI(Processor Device)
[    0.097780] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.097782] ACPI: Added _OSI(Processor Aggregator Device)
[    0.100424] ACPI: Interpreter enabled
[    0.100429] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
[    0.100433] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[    0.100444] ACPI: (supports S0 S3 S4 S5)
[    0.100445] ACPI: Using IOAPIC for interrupt routing
[    0.100467] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.100562] ACPI: No dock devices found.
[    0.105604] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.105609] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.105653] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.105742] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.105888] PCI host bridge to bus 0000:00
[    0.105891] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.105892] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.105894] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.105896] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.105897] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[    0.105900] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[    0.105901] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[    0.105903] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[    0.105905] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.105906] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.105907] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.105909] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.105910] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.105912] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.105913] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[    0.105915] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[    0.105916] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[    0.105918] pci_bus 0000:00: root bus resource [mem 0xc2a00000-0xfebfffff]
[    0.105919] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.105927] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.106006] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[    0.106017] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
[    0.106023] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.106027] pci 0000:00:02.0: reg 0x20: [io  0x1800-0x183f]
[    0.106122] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.106145] pci 0000:00:16.0: reg 0x10: [mem 0xe0626100-0xe062610f 64bit]
[    0.106221] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.106299] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.106317] pci 0000:00:19.0: reg 0x10: [mem 0xe0600000-0xe061ffff]
[    0.106326] pci 0000:00:19.0: reg 0x14: [mem 0xe0624000-0xe0624fff]
[    0.106335] pci 0000:00:19.0: reg 0x18: [io  0x1840-0x185f]
[    0.106398] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.106469] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.106491] pci 0000:00:1a.0: reg 0x10: [mem 0xe0625800-0xe0625bff]
[    0.106579] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.106615] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.106660] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.106677] pci 0000:00:1b.0: reg 0x10: [mem 0xe0620000-0xe0623fff 64bit]
[    0.106751] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.106785] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.106831] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.106950] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.107038] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.107170] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.107258] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.107379] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.107462] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.107591] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.107678] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.107700] pci 0000:00:1d.0: reg 0x10: [mem 0xe0625c00-0xe0625fff]
[    0.107789] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.107823] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.107866] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[    0.108033] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.108052] pci 0000:00:1f.2: reg 0x10: [io  0x1880-0x1887]
[    0.108061] pci 0000:00:1f.2: reg 0x14: [io  0x1890-0x1893]
[    0.108070] pci 0000:00:1f.2: reg 0x18: [io  0x1888-0x188f]
[    0.108079] pci 0000:00:1f.2: reg 0x1c: [io  0x1894-0x1897]
[    0.108088] pci 0000:00:1f.2: reg 0x20: [io  0x1860-0x187f]
[    0.108096] pci 0000:00:1f.2: reg 0x24: [mem 0xe0625000-0xe06257ff]
[    0.108145] pci 0000:00:1f.2: PME# supported from D3hot
[    0.108213] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.108229] pci 0000:00:1f.3: reg 0x10: [mem 0xe0626000-0xe06260ff 64bit]
[    0.108250] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.108405] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.108663] pci 0000:02:00.0: [8086:0085] type 00 class 0x028000
[    0.108829] pci 0000:02:00.0: reg 0x10: [mem 0xe0400000-0xe0401fff 64bit]
[    0.109600] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.117684] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.117693] pci 0000:00:1c.1:   bridge window [mem 0xe0400000-0xe04fffff]
[    0.117787] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.117926] pci 0000:04:00.0: [1180:e823] type 00 class 0x080501
[    0.117953] pci 0000:04:00.0: MMC controller base frequency changed to 50Mhz.
[    0.117973] pci 0000:04:00.0: proprietary Ricoh MMC controller disabled (via firewire function)
[    0.117974] pci 0000:04:00.0: MMC cards are now supported by standard SDHCI controller
[    0.118014] pci 0000:04:00.0: reg 0x10: [mem 0xe0500000-0xe05000ff]
[    0.118317] pci 0000:04:00.0: supports D1 D2
[    0.118318] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.118445] pci 0000:04:00.1: [1180:e232] type 00 class 0x088000
[    0.118484] pci 0000:04:00.1: reg 0x10: [mem 0xe0500100-0xe05001ff]
[    0.118768] pci 0000:04:00.1: supports D1 D2
[    0.118769] pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.125586] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.125601] pci 0000:00:1c.4:   bridge window [mem 0xe0500000-0xe05fffff]
[    0.125773] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
[    0.125817] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled.
[    0.125859] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
[    0.125899] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled.
[    0.125941] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.125981] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.126021] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.126061] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.126463] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[    0.126540] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.126543] vgaarb: loaded
[    0.126544] vgaarb: bridge control possible 0000:00:02.0
[    0.126580] PCI: Using ACPI for IRQ routing
[    0.128030] PCI: pci_cache_line_size set to 64 bytes
[    0.128150] e820: reserve RAM buffer [mem 0xbfed0000-0xbfffffff]
[    0.128152] e820: reserve RAM buffer [mem 0x43b600000-0x43bffffff]
[    0.128257] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.128261] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.131286] Switched to clocksource hpet
[    0.133005] pnp: PnP ACPI init
[    0.133020] ACPI: bus type PNP registered
[    0.133085] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.133087] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.133089] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.133090] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.133092] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.133094] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.133096] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.133098] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.133099] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
[    0.133101] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
[    0.133104] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.133576] pnp 00:01: [dma 4]
[    0.133601] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.133625] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.133709] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.133711] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.133746] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.133782] system 00:05: [io  0x0500-0x057f] could not be reserved
[    0.133784] system 00:05: [io  0x0480-0x04bf] has been reserved
[    0.133786] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.133810] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.133847] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.133879] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.133890] pnp: PnP ACPI: found 9 devices
[    0.133891] ACPI: bus type PNP unregistered
[    0.140362] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.140365] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[    0.140367] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[    0.140383] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.140385] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.140387] pci 0000:00:1c.3: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.140394] pci 0000:00:1c.3: BAR 14: assigned [mem 0xc2a00000-0xc2bfffff]
[    0.140401] pci 0000:00:1c.3: BAR 15: assigned [mem 0xc2c00000-0xc2dfffff 64bit pref]
[    0.140404] pci 0000:00:1c.3: BAR 13: assigned [io  0x2000-0x2fff]
[    0.140406] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.140424] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.140431] pci 0000:00:1c.1:   bridge window [mem 0xe0400000-0xe04fffff]
[    0.140443] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.140446] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.140453] pci 0000:00:1c.3:   bridge window [mem 0xc2a00000-0xc2bfffff]
[    0.140458] pci 0000:00:1c.3:   bridge window [mem 0xc2c00000-0xc2dfffff 64bit pref]
[    0.140466] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.140473] pci 0000:00:1c.4:   bridge window [mem 0xe0500000-0xe05fffff]
[    0.140486] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.140487] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.140489] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.140490] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.140492] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.140493] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.140495] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[    0.140496] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.140498] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.140499] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.140500] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[    0.140502] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.140503] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.140505] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[    0.140506] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[    0.140508] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[    0.140509] pci_bus 0000:00: resource 20 [mem 0xc2a00000-0xfebfffff]
[    0.140511] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
[    0.140512] pci_bus 0000:02: resource 1 [mem 0xe0400000-0xe04fffff]
[    0.140514] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.140516] pci_bus 0000:03: resource 1 [mem 0xc2a00000-0xc2bfffff]
[    0.140517] pci_bus 0000:03: resource 2 [mem 0xc2c00000-0xc2dfffff 64bit pref]
[    0.140519] pci_bus 0000:04: resource 1 [mem 0xe0500000-0xe05fffff]
[    0.140573] NET: Registered protocol family 2
[    0.140771] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.141015] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.141136] TCP: Hash tables configured (established 131072 bind 65536)
[    0.141159] TCP: reno registered
[    0.141177] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.141234] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.141342] NET: Registered protocol family 1
[    0.141355] pci 0000:00:02.0: Boot video device
[    0.141673] PCI: CLS 64 bytes, default 64
[    0.141718] Unpacking initramfs...
[    0.414270] Freeing initrd memory: 15972K (ffff8800360be000 - ffff880037057000)
[    0.414275] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.414277] software IO TLB [mem 0xbbed0000-0xbfed0000] (64MB) mapped at [ffff8800bbed0000-ffff8800bfecffff]
[    0.414475] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.414516] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[    0.414523] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[    0.414532] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28
[    0.414540] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28
[    0.414604] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.414846] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.414898] audit: initializing netlink subsys (disabled)
[    0.414916] audit: type=2000 audit(1409419967.412:1): initialized
[    0.427467] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.427649] VFS: Disk quotas dquot_6.5.2
[    0.427670] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.427719] msgmni has been set to 32007
[    0.427933] alg: No test for stdrng (krng)
[    0.427957] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.427992] io scheduler noop registered
[    0.427993] io scheduler deadline registered
[    0.428011] io scheduler cfq registered (default)
[    0.428180] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.428353] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.428444] pcieport 0000:00:1c.3: enabling device (0104 -> 0107)
[    0.428480] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[    0.428606] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[    0.428725] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.428731] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.428754] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.428756] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.428761] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.428783] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.428788] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.428810] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    0.428812] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    0.428814] pci 0000:04:00.1: Signaling PME through PCIe PME interrupt
[    0.428819] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    0.428830] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.428874] pciehp 0000:00:1c.3:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[    0.428906] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
[    0.428911] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.428956] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x408000 bytes, mapped to 0xffffc90005b80000
[    0.428958] simple-framebuffer simple-framebuffer.0: format=x8r8g8b8, mode=1376x768x32, linelength=5504
[    0.431307] Console: switching to colour frame buffer device 172x48
[    0.433588] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    0.433595] intel_idle: MWAIT substates: 0x21120
[    0.433596] intel_idle: v0.4 model 0x2A
[    0.433597] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.433764] GHES: HEST is not enabled!
[    0.433818] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.434220] Linux agpgart interface v0.103
[    0.434309] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.443492] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.443497] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.443618] mousedev: PS/2 mouse device common for all mice
[    0.443659] rtc_cmos 00:06: RTC can wake from S4
[    0.443784] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.443812] rtc_cmos 00:06: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.443820] Intel P-state driver initializing.
[    0.443829] Intel pstate controlling: cpu 0
[    0.443847] Intel pstate controlling: cpu 1
[    0.443864] Intel pstate controlling: cpu 2
[    0.443878] Intel pstate controlling: cpu 3
[    0.443899] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    0.443900] AMD IOMMUv2 functionality not available on this system
[    0.443986] TCP: cubic registered
[    0.444049] NET: Registered protocol family 10
[    0.444257] mip6: Mobile IPv6
[    0.444259] NET: Registered protocol family 17
[    0.444262] mpls_gso: MPLS GSO support
[    0.444517] registered taskstats version 1
[    0.445010] rtc_cmos 00:06: setting system clock to 2014-08-30 17:32:47 UTC (1409419967)
[    0.445060] PM: Hibernation image not present or could not be loaded.
[    0.445598] Freeing unused kernel memory: 1008K (ffffffff818bc000 - ffffffff819b8000)
[    0.445599] Write protecting the kernel read-only data: 8192k
[    0.452054] Freeing unused kernel memory: 1176K (ffff8800014da000 - ffff880001600000)
[    0.452924] Freeing unused kernel memory: 324K (ffff8800017af000 - ffff880001800000)
[    0.454998] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.510965] systemd-udevd[71]: starting version 208
[    0.511267] random: systemd-udevd urandom read with 1 bits of entropy available
[    0.522021] pps_core: LinuxPPS API ver. 1 registered
[    0.522024] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.522211] PTP clock support registered
[    0.522780] thermal LNXTHERM:00: registered as thermal_zone0
[    0.522784] ACPI: Thermal Zone [THM0] (57 C)
[    0.522816] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    0.522818] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    0.522898] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    0.522920] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[    0.523589] thermal LNXTHERM:01: registered as thermal_zone1
[    0.523591] ACPI: Thermal Zone [THM1] (27 C)
[    0.525081] ACPI: bus type USB registered
[    0.525117] usbcore: registered new interface driver usbfs
[    0.525131] usbcore: registered new interface driver hub
[    0.525177] usbcore: registered new device driver usb
[    0.525538] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.525733] ehci-pci: EHCI PCI platform driver
[    0.526171] sdhci: Secure Digital Host Controller Interface driver
[    0.526174] sdhci: Copyright(c) Pierre Ossman
[    0.526364] sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e823] (rev 4)
[    0.526663] mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA
[    0.528451] SCSI subsystem initialized
[    0.529557] libata version 3.00 loaded.
[    0.724004] e1000e 0000:00:19.0 eth0: registered PHC clock
[    0.724015] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:71:a0:9c
[    0.724021] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    0.724066] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[    0.724246] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.724253] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.724277] ehci-pci 0000:00:1a.0: debug port 2
[    0.728194] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.728234] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe0625800
[    0.739509] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.739652] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.739658] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.739662] usb usb1: Product: EHCI Host Controller
[    0.739666] usb usb1: Manufacturer: Linux 3.14-2-amd64 ehci_hcd
[    0.739670] usb usb1: SerialNumber: 0000:00:1a.0
[    0.740222] hub 1-0:1.0: USB hub found
[    0.740239] hub 1-0:1.0: 3 ports detected
[    0.740728] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.740742] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.740770] ehci-pci 0000:00:1d.0: debug port 2
[    0.744703] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.744740] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe0625c00
[    0.755518] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.755663] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.755669] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.755673] usb usb2: Product: EHCI Host Controller
[    0.755676] usb usb2: Manufacturer: Linux 3.14-2-amd64 ehci_hcd
[    0.755680] usb usb2: SerialNumber: 0000:00:1d.0
[    0.756142] hub 2-0:1.0: USB hub found
[    0.756159] hub 2-0:1.0: 3 ports detected
[    0.756481] ahci 0000:00:1f.2: version 3.0
[    0.756916] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[    0.756968] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.771573] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[    0.771586] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    0.772535] scsi0 : ahci
[    0.772654] scsi1 : ahci
[    0.772744] scsi2 : ahci
[    0.772836] scsi3 : ahci
[    0.772924] scsi4 : ahci
[    0.773011] scsi5 : ahci
[    0.773051] ata1: SATA max UDMA/133 abar m2048@0xe0625000 port 0xe0625100 irq 45
[    0.773054] ata2: SATA max UDMA/133 abar m2048@0xe0625000 port 0xe0625180 irq 45
[    0.773055] ata3: SATA max UDMA/133 abar m2048@0xe0625000 port 0xe0625200 irq 45
[    0.773056] ata4: DUMMY
[    0.773057] ata5: DUMMY
[    0.773058] ata6: DUMMY
[    1.051593] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.091588] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.092010] ata1.00: supports DRM functions and may not be fully accessible
[    1.092318] ata1.00: disabling queued TRIM support
[    1.092328] ata1.00: ATA-9: Crucial_CT960M500SSD1, MU02, max UDMA/133
[    1.092333] ata1.00: 1875385008 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.093350] ata1.00: supports DRM functions and may not be fully accessible
[    1.093635] ata1.00: disabling queued TRIM support
[    1.094265] ata1.00: configured for UDMA/133
[    1.094718] scsi 0:0:0:0: Direct-Access     ATA      Crucial_CT960M50 MU02 PQ: 0 ANSI: 5
[    1.184134] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.184143] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.184769] hub 1-1:1.0: USB hub found
[    1.184866] hub 1-1:1.0: 6 ports detected
[    1.295635] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.411617] tsc: Refined TSC clocksource calibration: 2491.910 MHz
[    1.411632] ata2: SATA link down (SStatus 0 SControl 300)
[    1.428173] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.428182] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.428797] hub 2-1:1.0: USB hub found
[    1.428926] hub 2-1:1.0: 8 ports detected
[    1.499890] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[    1.593080] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016
[    1.593089] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.593094] usb 1-1.3: Product: Biometric Coprocessor
[    1.593097] usb 1-1.3: Manufacturer: UPEK
[    1.663901] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[    1.739693] ata3: SATA link down (SStatus 0 SControl 300)
[    1.746446] sd 0:0:0:0: [sda] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
[    1.746460] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.746595] sd 0:0:0:0: [sda] Write Protect is off
[    1.746603] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.746647] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.748800]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[    1.749949] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.750979] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.760385] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[    1.760393] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.760397] usb 1-1.4: Product: Broadcom Bluetooth Device
[    1.760400] usb 1-1.4: Manufacturer: Broadcom Corp
[    1.760403] usb 1-1.4: SerialNumber: EC55F9F085ED
[    1.816171] device-mapper: uevent: version 1.0.3
[    1.816267] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.831751] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
[    1.891592] raid6: sse2x1    6135 MB/s
[    1.930141] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b217
[    1.930151] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.930153] usb 1-1.6: Product: Integrated Camera
[    1.930154] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[    1.959600] raid6: sse2x2    9359 MB/s
[    1.999773] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[    2.027615] raid6: sse2x4   12268 MB/s
[    2.027617] raid6: using algorithm sse2x4 (12268 MB/s)
[    2.027618] raid6: using ssse3x2 recovery algorithm
[    2.027822] xor: automatically using best checksumming function:
[    2.067617]    avx       : 24514.000 MB/sec
[    2.071000] bio: create slab <bio-1> at 1
[    2.071145] Btrfs loaded
[    2.094033] usb 2-1.5: New USB device found, idVendor=056a, idProduct=0090
[    2.094036] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.094038] usb 2-1.5: Product: ISD-V4
[    2.094039] usb 2-1.5: Manufacturer: Tablet
[    2.095002] hidraw: raw HID events driver (C) Jiri Kosina
[    2.095347] usbcore: registered new interface driver usbhid
[    2.095349] usbhid: USB HID core driver
[    2.134516] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    2.136013] XFS (sda4): Mounting Filesystem
[    2.154115] XFS (sda4): Ending clean mount
[    2.234497] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    2.253248] systemd[1]: Inserted module 'autofs4'
[    2.253801] systemd[1]: Set hostname to <debian>.
[    2.411846] Switched to clocksource tsc
[    2.455807] systemd[1]: [/lib/systemd/system/lvm2-lvmetad.socket:9] Unknown lvalue 'RemoveOnStop' in section 'Socket'
[    2.507256] systemd[1]: Starting Syslog Socket.
[    2.507346] systemd[1]: Listening on Syslog Socket.
[    2.507373] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    2.507486] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.507509] systemd[1]: Starting Remote File Systems (Pre).
[    2.507530] systemd[1]: Reached target Remote File Systems (Pre).
[    2.507549] systemd[1]: Starting Delayed Shutdown Socket.
[    2.507588] systemd[1]: Listening on Delayed Shutdown Socket.
[    2.507605] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    2.507647] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    2.507673] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    2.507761] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    2.507819] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    2.507979] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.508005] systemd[1]: Starting Journal Socket.
[    2.508077] systemd[1]: Listening on Journal Socket.
[    2.508105] systemd[1]: Starting Syslog.
[    2.508123] systemd[1]: Reached target Syslog.
[    2.509393] systemd[1]: Starting Load Kernel Modules...
[    2.510363] systemd[1]: Mounting Debug File System...
[    2.512112] systemd[1]: Started Set Up Additional Binary Formats.
[    2.512192] systemd[1]: Mounting Huge Pages File System...
[    2.512919] systemd[1]: Mounting POSIX Message Queue File System...
[    2.514559] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    2.515406] systemd[1]: Starting Journal Service...
[    2.516350] systemd[1]: Started Journal Service.
[    2.526212] lp: driver loaded but no devices found
[    2.555287] ppdev: user-space parallel port driver
[    2.558565] fuse init (API version 7.22)
[    2.560728] loop: module loaded
[    2.577023] systemd-udevd[210]: starting version 208
[    2.666293] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/PNP0C09:00/PNP0C0E:00/input/input2
[    2.666298] ACPI: Sleep Button [SLPB]
[    2.666344] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/PNP0C09:00/PNP0C0D:00/input/input3
[    2.666543] ACPI: Lid Switch [LID]
[    2.666598] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    2.666601] ACPI: Power Button [PWRF]
[    2.666605] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
[    2.667137] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.674508] [drm] Initialized drm 1.1.0 20060810
[    2.680586] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.680705] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\PMIO) (20131218/utaddress-258)
[    2.680711] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.680715] ACPI Warning: SystemIO range 0x00000000000004c0-0x00000000000004cf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20131218/utaddress-258)
[    2.680718] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.680719] ACPI Warning: SystemIO range 0x00000000000004b0-0x00000000000004bf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20131218/utaddress-258)
[    2.680723] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.680724] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004af conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20131218/utaddress-258)
[    2.680727] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.680728] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.681739] Non-volatile memory driver v1.3
[    2.683835] systemd-udevd[261]: renamed network interface eth0 to eth1
[    2.693227] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[    2.694894] cfg80211: Calling CRDA to update world regulatory domain
[    2.695101] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    2.698883] Intel(R) Wireless WiFi driver for Linux, in-tree:
[    2.698887] Copyright(c) 2003- 2014 Intel Corporation
[    2.708126] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[    2.714376] hda_codec: CX20590: BIOS auto-probing.
[    2.715913] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[    2.716428] AVX version of gcm_enc/dec engaged.
[    2.723744] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    2.738168] iwlwifi 0000:02:00.0: irq 48 for MSI/MSI-X
[    2.741804] input: Wacom ISDv4 90 Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input8
[    2.742115] alg: No test for crc32 (crc32-pclmul)
[    2.742546] usbcore: registered new interface driver wacom
[    2.743706] Bluetooth: Core ver 2.18
[    2.743722] NET: Registered protocol family 31
[    2.743723] Bluetooth: HCI device and connection manager initialized
[    2.743741] Bluetooth: HCI socket layer initialized
[    2.743744] Bluetooth: L2CAP socket layer initialized
[    2.743754] Bluetooth: SCO socket layer initialized
[    2.747889] media: Linux media interface: v0.10
[    2.750893] Linux video capture interface: v2.00
[    2.751175] usbcore: registered new interface driver btusb
[    2.754319] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
[    2.754450] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    2.756876] acpi device:07: registered as cooling_device4
[    2.756969] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
[    2.757004] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    2.757006] thinkpad_acpi: http://ibm-acpi.sf.net/
[    2.757007] thinkpad_acpi: ThinkPad BIOS CBET4000 4.0-6835-g8603513, EC 8ZHT24WW-3.20
[    2.757008] thinkpad_acpi: Lenovo ThinkPad X220 Tablet, model 4299Y48
[    2.757548] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[    2.757994] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    2.757996] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    2.758588] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
[    2.768936] [drm] Memory usable by graphics device = 2048M
[    2.768942] checking generic (d0000000 408000) vs hw (d0000000 10000000)
[    2.768944] fb: conflicting fb hw usage inteldrmfb vs simple - removing generic driver
[    2.768968] Console: switching to colour dummy device 80x25
[    2.769533] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    2.769536] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[    2.769546] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[    2.769549] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[    2.769631] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[    2.769648] i915 0000:00:02.0: irq 49 for MSI/MSI-X
[    2.769656] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.769657] [drm] Driver supports precise vblank timestamp query.
[    2.769836] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.783508] ACPI: Battery Slot [BAT0] (battery present)
[    2.783632] ACPI: Battery Slot [BAT1] (battery absent)
[    2.784149] ACPI: AC Adapter [AC] (on-line)
[    2.785743] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    2.785914] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    2.786875] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input10
[    2.806290] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    2.809721] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    2.809855] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    2.810016] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    2.810152] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    2.810290] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    2.810362] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    2.810686] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    2.823872] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input18
[    2.823960] usbcore: registered new interface driver uvcvideo
[    2.823962] USB Video Class driver (1.1.1)
[    2.834909] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[    2.839051] iTCO_vendor_support: vendor-support=0
[    2.839706] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    2.839740] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0560)
[    2.840029] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.847030] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    2.850381] FAT-fs (sda3): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[    2.851646] FAT-fs (sda3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    2.860347] systemd-udevd[252]: renamed network interface wlan0 to wlan1
[    2.862865] cfg80211: World regulatory domain updated:
[    2.862869] cfg80211:  DFS Master region: unset
[    2.862870] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    2.862873] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    2.862874] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    2.862876] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[    2.862878] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[    2.862879] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[    2.862881] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[    2.903784] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[    2.921349] fbcon: inteldrmfb (fb0) is primary device
[    3.608146] Console: switching to colour frame buffer device 170x48
[    3.614434] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.614438] i915 0000:00:02.0: registered panic notifier
[    3.614482] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.796528] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800, board id: 1611, fw id: 1099905
[    3.796552] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    3.856454] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    4.162742] random: nonblocking pool is initialized
[    4.816473] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    8.071206] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    9.880791] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   10.191022] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input19
[   13.363770] NET: Registered protocol family 38
[   13.417202] bio: create slab <bio-2> at 2
[   13.472190] XFS (dm-0): Mounting Filesystem
[   13.497584] XFS (dm-0): Ending clean mount
[   13.505557] systemd-journald[185]: Received request to flush runtime journal from PID 1
[   13.870574] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.870578] Bluetooth: BNEP filters: protocol multicast
[   13.870586] Bluetooth: BNEP socket layer initialized
[   15.782141] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[   15.886029] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[   15.886216] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   15.895711] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[   15.895851] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   16.161903] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[   16.162057] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   16.238473] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   22.897897] wlan1: authenticate with 00:24:37:96:06:b0
[   22.901690] wlan1: send auth to 00:24:37:96:06:b0 (try 1/3)
[   22.903461] wlan1: authenticated
[   22.903585] iwlwifi 0000:02:00.0 wlan1: disabling HT as WMM/QoS is not supported by the AP
[   22.903589] iwlwifi 0000:02:00.0 wlan1: disabling VHT as WMM/QoS is not supported by the AP
[   22.907314] wlan1: associate with 00:24:37:96:06:b0 (try 1/3)
[   22.910255] wlan1: RX AssocResp from 00:24:37:96:06:b0 (capab=0x451 status=0 aid=4)
[   22.914071] wlan1: associated
[   22.914122] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   29.116272] Bluetooth: RFCOMM TTY layer initialized
[   29.116284] Bluetooth: RFCOMM socket layer initialized
[   29.116290] Bluetooth: RFCOMM ver 1.11