[    0.000000] Linux version 4.9.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170321 (Debian 6.3.0-11) ) #1 SMP Debian 4.9.18-1 (2017-03-30)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.0-2-amd64 root=UUID=a994a1c5-a911-48bd-a468-4aa6a9728001 ro quiet iomem=relaxed
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000c0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fb2afff] usable
[    0.000000] BIOS-e820: [mem 0x000000007fb2b000-0x000000007fbfffff] type 16
[    0.000000] BIOS-e820: [mem 0x000000007fc00000-0x000000008fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 7470AE7/7470AE7, BIOS CBET4000 4.5-1544-g2f6b52e3a0-dirty 04/14/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x270000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 07FC00000 mask FFFC00000 uncachable
[    0.000000]   1 base 080000000 mask FC0000000 uncachable
[    0.000000]   2 base 0C0000000 mask FF0000000 uncachable
[    0.000000]   3 base 0D0000000 mask FF0000000 write-combining
[    0.000000]   4 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x7fb2b max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f6310-0x000f631f] mapped at [ffffa0e4c00f6310]
[    0.000000] Base memory trampoline at [ffffa0e4c0099000] 99000 size 24576
[    0.000000] BRK [0x1b392b000, 0x1b392bfff] PGTABLE
[    0.000000] BRK [0x1b392c000, 0x1b392cfff] PGTABLE
[    0.000000] BRK [0x1b392d000, 0x1b392dfff] PGTABLE
[    0.000000] BRK [0x1b392e000, 0x1b392efff] PGTABLE
[    0.000000] BRK [0x1b392f000, 0x1b392ffff] PGTABLE
[    0.000000] BRK [0x1b3930000, 0x1b3930fff] PGTABLE
[    0.000000] BRK [0x1b3931000, 0x1b3931fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35829000-0x36c0bfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F64B0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x000000007FB3C0E0 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x000000007FB3F6E0 0000F4 (v03 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x000000007FB3C280 00345D (v03 COREv4 COREBOOT 20090419 INTL 20161222)
[    0.000000] ACPI: FACS 0x000000007FB3C240 000040
[    0.000000] ACPI: SSDT 0x000000007FB3F7E0 0005A0 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: MCFG 0x000000007FB3FD80 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: TCPA 0x000000007FB3FDC0 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x000000007FB3FE00 000068 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DMAR 0x000000007FB3FE70 000078 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x000000007FB3FEF0 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000026fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x26fff6000-0x26fffafff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000026fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007fb2afff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000026fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000026fffffff]
[    0.000000] On node 0 totalpages: 2030282
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8109 pages used for memmap
[    0.000000]   DMA32 zone: 518955 pages, LIFO batch:31
[    0.000000]   Normal zone: 23552 pages used for memmap
[    0.000000]   Normal zone: 1507328 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x0000000080000000-0x000000008fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7fb2b000-0x7fbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7fc00000-0x8fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x90000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
[    0.000000] e820: [mem 0x90000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffffa0e72fc00000 s103384 r8192 d31784 u1048576
[    0.000000] pcpu-alloc: s103384 r8192 d31784 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1998535
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-2-amd64 root=UUID=a994a1c5-a911-48bd-a468-4aa6a9728001 ro quiet iomem=relaxed
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7891788K/8121128K available (6143K kernel code, 1129K rwdata, 2844K rodata, 1392K init, 684K bss, 229340K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.000000] NR_IRQS:33024 nr_irqs:440 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1866.699 MHz processor
[    0.004015] Calibrating delay loop (skipped), value calculated using timer frequency.. 3733.39 BogoMIPS (lpj=7466796)
[    0.004019] pid_max: default: 32768 minimum: 301
[    0.004045] ACPI: Core revision 20160831
[    0.010611] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.010699] Security Framework initialized
[    0.010701] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.010711] AppArmor: AppArmor disabled by boot time parameter
[    0.011584] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.015991] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.018151] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.018166] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.018752] CPU: Physical Processor ID: 0
[    0.018753] CPU: Processor Core ID: 0
[    0.018756] mce: CPU supports 6 MCE banks
[    0.018766] CPU0: Thermal monitoring enabled (TM2)
[    0.018772] process: using mwait in idle threads
[    0.018779] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.018780] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.019279] Freeing SMP alternatives memory: 24K (ffffffff93e78000 - ffffffff93e7e000)
[    0.024026] ftrace: allocating 25004 entries in 98 pages
[    0.036121] smpboot: Max logical packages: 1
[    0.036128] DMAR: Host address width 36
[    0.036130] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.036142] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020e30260 ecap 1000
[    0.036143] DMAR: DRHD base: 0x000000fed91000 flags: 0x0
[    0.036151] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c0000020630260 ecap 1000
[    0.036152] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[    0.036157] DMAR: dmar2: reg_base_addr fed93000 ver 1:0 cap c9008020630260 ecap 1000
[    0.036537] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.080000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     L9400  @ 1.86GHz (family: 0x6, model: 0x17, stepping: 0x6)
[    0.080000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.080000] ... version:                2
[    0.080000] ... bit width:              40
[    0.080000] ... generic registers:      2
[    0.080000] ... value mask:             000000ffffffffff
[    0.080000] ... max period:             000000007fffffff
[    0.080000] ... fixed-purpose events:   3
[    0.080000] ... event mask:             0000000700000003
[    0.080000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.080000] x86: Booting SMP configuration:
[    0.080000] .... node  #0, CPUs:      #1
[    0.158030] x86: Booted up 1 node, 2 CPUs
[    0.158030] smpboot: Total of 2 processors activated (7466.86 BogoMIPS)
[    0.160473] devtmpfs: initialized
[    0.160473] x86/mm: Memory block size: 128MB
[    0.168005] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.168005] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.168005] pinctrl core: initialized pinctrl subsystem
[    0.168005] NET: Registered protocol family 16
[    0.180005] cpuidle: using governor ladder
[    0.192004] cpuidle: using governor menu
[    0.192047] ACPI: bus type PCI registered
[    0.192049] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.192156] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.192159] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.192171] PCI: Using configuration type 1 for base access
[    0.204060] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.204086] ACPI: Added _OSI(Module Device)
[    0.204088] ACPI: Added _OSI(Processor Device)
[    0.204089] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.204090] ACPI: Added _OSI(Processor Aggregator Device)
[    0.204329] ACPI: Executed 1 blocks of module-level executable AML code
[    0.208398] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.209842] ACPI : EC: EC started
[    0.209843] ACPI : EC: interrupt blocked
[    0.209938] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.209940] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.209942] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.209943] ACPI: Interpreter enabled
[    0.209969] ACPI: (supports S0 S3 S4 S5)
[    0.209971] ACPI: Using IOAPIC for interrupt routing
[    0.210005] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.223037] acpi ACPI0003:01: ACPI dock station (docks/bays count: 1)
[    0.223539] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.223545] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.223618] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.223631] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.223704] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c69ff])
[    0.224025] PCI host bridge to bus 0000:00
[    0.224028] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.224030] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.224033] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.224035] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.224037] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.224039] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.224041] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.224043] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.224045] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.224047] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.224049] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.224051] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.224053] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.224055] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.224057] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.224060] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfebfffff window]
[    0.224062] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.224064] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.224076] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[    0.224104] DMAR: Forcing write-buffer flush capability
[    0.224106] DMAR: Disabling IOMMU for graphics on this chipset
[    0.224254] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[    0.224268] pci 0000:00:02.0: reg 0x10: [mem 0xe1400000-0xe17fffff 64bit]
[    0.224277] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.224283] pci 0000:00:02.0: reg 0x20: [io  0x3400-0x3407]
[    0.224439] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[    0.224452] pci 0000:00:02.1: reg 0x10: [mem 0xe1800000-0xe18fffff 64bit]
[    0.224654] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000
[    0.224678] pci 0000:00:19.0: reg 0x10: [mem 0xe1b00000-0xe1b1ffff]
[    0.224690] pci 0000:00:19.0: reg 0x14: [mem 0xe1b24000-0xe1b24fff]
[    0.224702] pci 0000:00:19.0: reg 0x18: [io  0x3000-0x301f]
[    0.224796] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.224933] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.224993] pci 0000:00:1a.0: reg 0x20: [io  0x3020-0x303f]
[    0.225142] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.225217] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.225277] pci 0000:00:1a.1: reg 0x20: [io  0x3040-0x305f]
[    0.225425] pci 0000:00:1a.1: System wakeup disabled by ACPI
[    0.225499] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[    0.225559] pci 0000:00:1a.2: reg 0x20: [io  0x3060-0x307f]
[    0.225704] pci 0000:00:1a.2: System wakeup disabled by ACPI
[    0.225788] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.225812] pci 0000:00:1a.7: reg 0x10: [mem 0xe1b26000-0xe1b263ff]
[    0.225925] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.226005] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.226084] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.226109] pci 0000:00:1b.0: reg 0x10: [mem 0xe1b20000-0xe1b23fff 64bit]
[    0.226226] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.226312] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.226388] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.226493] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.226649] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[    0.226763] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.226919] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[    0.227032] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.227193] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[    0.227305] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.227470] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.227530] pci 0000:00:1d.0: reg 0x20: [io  0x3080-0x309f]
[    0.227679] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.227754] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.227814] pci 0000:00:1d.1: reg 0x20: [io  0x30a0-0x30bf]
[    0.227961] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.228044] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.228104] pci 0000:00:1d.2: reg 0x20: [io  0x30c0-0x30df]
[    0.228251] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.228335] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.228359] pci 0000:00:1d.7: reg 0x10: [mem 0xe1b27000-0xe1b273ff]
[    0.228472] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.228551] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.228624] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.228824] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[    0.229105] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[    0.229129] pci 0000:00:1f.2: reg 0x10: [io  0x3408-0x340f]
[    0.229141] pci 0000:00:1f.2: reg 0x14: [io  0x3418-0x341b]
[    0.229153] pci 0000:00:1f.2: reg 0x18: [io  0x3410-0x3417]
[    0.229165] pci 0000:00:1f.2: reg 0x1c: [io  0x341c-0x341f]
[    0.229177] pci 0000:00:1f.2: reg 0x20: [io  0x30e0-0x30ff]
[    0.229190] pci 0000:00:1f.2: reg 0x24: [mem 0xe1b25000-0xe1b257ff]
[    0.229259] pci 0000:00:1f.2: PME# supported from D3hot
[    0.229405] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.229429] pci 0000:00:1f.3: reg 0x10: [mem 0xe1b28000-0xe1b280ff 64bit]
[    0.229461] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.229691] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.229801] pci 0000:02:00.0: [168c:0030] type 00 class 0x028000
[    0.229836] pci 0000:02:00.0: reg 0x10: [mem 0xe1900000-0xe191ffff 64bit]
[    0.229909] pci 0000:02:00.0: reg 0x30: [mem 0xe1920000-0xe192ffff pref]
[    0.230009] pci 0000:02:00.0: supports D1
[    0.230011] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[    0.240022] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.240030] pci 0000:00:1c.1:   bridge window [mem 0xe1900000-0xe19fffff]
[    0.240135] pci 0000:03:00.0: [168c:0030] type 00 class 0x028000
[    0.240170] pci 0000:03:00.0: reg 0x10: [mem 0xe1a00000-0xe1a1ffff 64bit]
[    0.240243] pci 0000:03:00.0: reg 0x30: [mem 0xe1a20000-0xe1a2ffff pref]
[    0.240343] pci 0000:03:00.0: supports D1
[    0.240345] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[    0.252021] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.252029] pci 0000:00:1c.2:   bridge window [mem 0xe1a00000-0xe1afffff]
[    0.252152] acpiphp: Slot [1] registered
[    0.252192] pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.252238] pci 0000:04:00.0: reg 0x10: [mem 0xe0800000-0xe0807fff 64bit]
[    0.252463] pci 0000:04:00.0: PME# supported from D3hot
[    0.264023] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.264029] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.264034] pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe08fffff]
[    0.264042] pci 0000:00:1c.3:   bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[    0.264238] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.264253] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.264255] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.264258] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.264260] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[    0.264262] pci 0000:00:1e.0:   bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[    0.264264] pci 0000:00:1e.0:   bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
[    0.264266] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.264269] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.264271] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.264273] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.264275] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.264278] pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.264280] pci 0000:00:1e.0:   bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[    0.264282] pci 0000:00:1e.0:   bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[    0.264284] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[    0.264287] pci 0000:00:1e.0:   bridge window [mem 0x90000000-0xfebfffff window] (subtractive decode)
[    0.264289] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[    0.264501] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.264591] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.264677] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.264763] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.264847] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.264933] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.265018] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.265103] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.266899] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.266996] ACPI : EC: interrupt unblocked
[    0.266996] ACPI : EC: event unblocked
[    0.266996] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.266996] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.266996] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.266996] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.266996] vgaarb: loaded
[    0.266996] vgaarb: bridge control possible 0000:00:02.0
[    0.266996] PCI: Using ACPI for IRQ routing
[    0.266996] PCI: pci_cache_line_size set to 64 bytes
[    0.266996] e820: reserve RAM buffer [mem 0x7fb2b000-0x7fffffff]
[    0.268152] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.268152] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.268152] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.272028] clocksource: Switched to clocksource hpet
[    0.284585] VFS: Disk quotas dquot_6.6.0
[    0.284629] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.284770] pnp: PnP ACPI init
[    0.284955] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.284958] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.284961] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.284963] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.284966] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.284969] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.284971] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.284974] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.284979] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.285692] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.285696] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.285788] system 00:02: [io  0x0800-0x080f] has been reserved
[    0.285791] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.285794] system 00:02: [io  0x0580-0x05bf] has been reserved
[    0.285797] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.285846] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.285915] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.285973] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.286151] pnp: PnP ACPI: found 6 devices
[    0.294324] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.294387] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.294405] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.294412] pci 0000:00:1c.1:   bridge window [mem 0xe1900000-0xe19fffff]
[    0.294423] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.294429] pci 0000:00:1c.2:   bridge window [mem 0xe1a00000-0xe1afffff]
[    0.294440] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.294443] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.294450] pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe08fffff]
[    0.294455] pci 0000:00:1c.3:   bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[    0.294463] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.294479] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.294482] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.294484] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.294486] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.294488] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[    0.294490] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[    0.294493] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.294495] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.294497] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.294499] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.294501] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.294503] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.294505] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.294507] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[    0.294510] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.294512] pci_bus 0000:00: resource 19 [mem 0x90000000-0xfebfffff window]
[    0.294514] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[    0.294517] pci_bus 0000:02: resource 1 [mem 0xe1900000-0xe19fffff]
[    0.294519] pci_bus 0000:03: resource 1 [mem 0xe1a00000-0xe1afffff]
[    0.294522] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    0.294524] pci_bus 0000:04: resource 1 [mem 0xe0000000-0xe08fffff]
[    0.294526] pci_bus 0000:04: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref]
[    0.294528] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.294531] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.294533] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.294535] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.294537] pci_bus 0000:05: resource 8 [mem 0x000c8000-0x000cbfff window]
[    0.294539] pci_bus 0000:05: resource 9 [mem 0x000cc000-0x000cffff window]
[    0.294541] pci_bus 0000:05: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.294543] pci_bus 0000:05: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.294546] pci_bus 0000:05: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.294548] pci_bus 0000:05: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.294550] pci_bus 0000:05: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.294552] pci_bus 0000:05: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.294554] pci_bus 0000:05: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.294556] pci_bus 0000:05: resource 17 [mem 0x000ec000-0x000effff window]
[    0.294558] pci_bus 0000:05: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.294560] pci_bus 0000:05: resource 19 [mem 0x90000000-0xfebfffff window]
[    0.294563] pci_bus 0000:05: resource 20 [mem 0xfed40000-0xfed44fff window]
[    0.294704] NET: Registered protocol family 2
[    0.294990] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.295293] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.295765] TCP: Hash tables configured (established 65536 bind 65536)
[    0.295822] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.295890] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.296020] NET: Registered protocol family 1
[    0.296044] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.298694] PCI: CLS 64 bytes, default 64
[    0.298762] Unpacking initramfs...
[    0.885096] Freeing initrd memory: 20364K (ffffa0e4f5829000 - ffffa0e4f6c0c000)
[    0.885200] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.885204] software IO TLB [mem 0x7bb2b000-0x7fb2b000] (64MB) mapped at [ffffa0e53bb2b000-ffffa0e53fb2afff]
[    0.885804] audit: initializing netlink subsys (disabled)
[    0.885840] audit: type=2000 audit(1492179863.884:1): initialized
[    0.886343] Initialise system trusted keyrings
[    0.886486] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    0.886527] zbud: loaded
[    0.970660] Key type asymmetric registered
[    0.970662] Asymmetric key parser 'x509' registered
[    0.970693] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.970737] io scheduler noop registered
[    0.970738] io scheduler deadline registered
[    0.970759] io scheduler cfq registered (default)
[    0.972085] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.972091] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[    0.972122] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.972124] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.972130] pcie_pme 0000:00:1c.1:pcie001: service driver pcie_pme loaded
[    0.972158] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    0.972160] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.972165] pcie_pme 0000:00:1c.2:pcie001: service driver pcie_pme loaded
[    0.972193] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.972195] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    0.972200] pcie_pme 0000:00:1c.3:pcie001: service driver pcie_pme loaded
[    0.972220] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.972229] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.972253] efifb: probing for efifb
[    0.972271] efifb: framebuffer at 0xd0000000, using 5120k, total 5120k
[    0.972272] efifb: mode is 1440x900x32, linelength=5760, pages=1
[    0.972273] efifb: scrolling: redraw
[    0.972275] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.976918] Console: switching to colour frame buffer device 180x56
[    0.981346] fb0: EFI VGA frame buffer device
[    0.981358] intel_idle: does not run on family 6 model 23
[    0.989709] Monitor-Mwait will be used to enter C-1 state
[    0.989716] Monitor-Mwait will be used to enter C-2 state
[    0.989720] Monitor-Mwait will be used to enter C-3 state
[    0.989724] tsc: Marking TSC unstable due to TSC halts in idle
[    0.990093] GHES: HEST is not enabled!
[    0.990217] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.990909] Linux agpgart interface v0.103
[    0.991085] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.991086] AMD IOMMUv2 functionality not available on this system
[    0.991382] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.002665] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.002671] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.002880] mousedev: PS/2 mouse device common for all mice
[    1.002949] rtc_cmos 00:03: RTC can wake from S4
[    1.003134] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.003166] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.003219] ledtrig-cpu: registered to indicate activity on CPUs
[    1.003527] NET: Registered protocol family 10
[    1.003863] mip6: Mobile IPv6
[    1.003865] NET: Registered protocol family 17
[    1.003869] mpls_gso: MPLS GSO support
[    1.004117] microcode: sig=0x10676, pf=0x80, revision=0x0
[    1.004175] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.004373] registered taskstats version 1
[    1.004376] Loading compiled-in X.509 certificates
[    1.006774] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    1.007282] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    1.007301] zswap: loaded using pool lzo/zbud
[    1.007958] rtc_cmos 00:03: setting system clock to 2017-04-14 14:24:24 UTC (1492179864)
[    1.008022] PM: Hibernation image not present or could not be loaded.
[    1.010146] Freeing unused kernel memory: 1392K (ffffffff93d1c000 - ffffffff93e78000)
[    1.010147] Write protecting the kernel read-only data: 12288k
[    1.011165] Freeing unused kernel memory: 2032K (ffffa0e673004000 - ffffa0e673200000)
[    1.015965] Freeing unused kernel memory: 1252K (ffffa0e6734c7000 - ffffa0e673600000)
[    1.025169] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.025613] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.176507] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.176619] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.176634] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.176653] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.177945] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.178006] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.180360] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.180461] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.180485] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.181054] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.234502] pps_core: LinuxPPS API ver. 1 registered
[    1.234505] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.235656] PTP clock support registered
[    1.246092] ACPI: bus type USB registered
[    1.246133] usbcore: registered new interface driver usbfs
[    1.246150] usbcore: registered new interface driver hub
[    1.246323] usbcore: registered new device driver usb
[    1.250466] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.251422] ehci-pci: EHCI PCI platform driver
[    1.251654] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    1.251663] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.251679] ehci-pci 0000:00:1a.7: debug port 1
[    1.254705] uhci_hcd: USB Universal Host Controller Interface driver
[    1.255589] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    1.257940] thermal LNXTHERM:00: registered as thermal_zone0
[    1.257942] ACPI: Thermal Zone [THM0] (67 C)
[    1.258102] ehci-pci 0000:00:1a.7: irq 18, io mem 0xe1b26000
[    1.259036] thermal LNXTHERM:01: registered as thermal_zone1
[    1.259038] ACPI: Thermal Zone [THM1] (50 C)
[    1.260439] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.260441] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.272030] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.272117] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.272120] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.272122] usb usb1: Product: EHCI Host Controller
[    1.272124] usb usb1: Manufacturer: Linux 4.9.0-2-amd64 ehci_hcd
[    1.272126] usb usb1: SerialNumber: 0000:00:1a.7
[    1.272357] hub 1-0:1.0: USB hub found
[    1.272370] hub 1-0:1.0: 6 ports detected
[    1.272924] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.272934] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[    1.282769] xhci_hcd 0000:04:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[    1.283336] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.283339] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.283341] usb usb2: Product: xHCI Host Controller
[    1.283343] usb usb2: Manufacturer: Linux 4.9.0-2-amd64 xhci-hcd
[    1.283345] usb usb2: SerialNumber: 0000:04:00.0
[    1.283531] hub 2-0:1.0: USB hub found
[    1.283545] hub 2-0:1.0: 2 ports detected
[    1.283881] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.283889] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 3
[    1.283904] ehci-pci 0000:00:1d.7: debug port 1
[    1.287815] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.287830] ehci-pci 0000:00:1d.7: irq 16, io mem 0xe1b27000
[    1.287974] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.287980] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[    1.288026] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.288187] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.288189] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.288191] usb usb4: Product: xHCI Host Controller
[    1.288194] usb usb4: Manufacturer: Linux 4.9.0-2-amd64 xhci-hcd
[    1.288196] usb usb4: SerialNumber: 0000:04:00.0
[    1.288380] hub 4-0:1.0: USB hub found
[    1.288395] hub 4-0:1.0: 2 ports detected
[    1.297243] SCSI subsystem initialized
[    1.300027] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.300101] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.300104] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.300106] usb usb3: Product: EHCI Host Controller
[    1.300108] usb usb3: Manufacturer: Linux 4.9.0-2-amd64 ehci_hcd
[    1.300110] usb usb3: SerialNumber: 0000:00:1d.7
[    1.300312] hub 3-0:1.0: USB hub found
[    1.300326] hub 3-0:1.0: 6 ports detected
[    1.303056] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.303066] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 5
[    1.303076] uhci_hcd 0000:00:1a.0: detected 2 ports
[    1.303102] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00003020
[    1.303191] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.303194] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.303196] usb usb5: Product: UHCI Host Controller
[    1.303198] usb usb5: Manufacturer: Linux 4.9.0-2-amd64 uhci_hcd
[    1.303200] usb usb5: SerialNumber: 0000:00:1a.0
[    1.303382] hub 5-0:1.0: USB hub found
[    1.303394] hub 5-0:1.0: 2 ports detected
[    1.303698] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.303706] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 6
[    1.303714] uhci_hcd 0000:00:1a.1: detected 2 ports
[    1.303747] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00003040
[    1.303825] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.303827] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.303830] usb usb6: Product: UHCI Host Controller
[    1.303832] usb usb6: Manufacturer: Linux 4.9.0-2-amd64 uhci_hcd
[    1.303834] usb usb6: SerialNumber: 0000:00:1a.1
[    1.304031] hub 6-0:1.0: USB hub found
[    1.304042] hub 6-0:1.0: 2 ports detected
[    1.304339] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.304346] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 7
[    1.304356] uhci_hcd 0000:00:1a.2: detected 2 ports
[    1.304378] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00003060
[    1.304459] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.304461] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.304463] usb usb7: Product: UHCI Host Controller
[    1.304465] usb usb7: Manufacturer: Linux 4.9.0-2-amd64 uhci_hcd
[    1.304467] usb usb7: SerialNumber: 0000:00:1a.2
[    1.304647] hub 7-0:1.0: USB hub found
[    1.304658] hub 7-0:1.0: 2 ports detected
[    1.304955] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.304962] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8
[    1.304971] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.304994] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080
[    1.305070] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    1.305073] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.305075] usb usb8: Product: UHCI Host Controller
[    1.305077] usb usb8: Manufacturer: Linux 4.9.0-2-amd64 uhci_hcd
[    1.305079] usb usb8: SerialNumber: 0000:00:1d.0
[    1.305276] hub 8-0:1.0: USB hub found
[    1.305287] hub 8-0:1.0: 2 ports detected
[    1.305675] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.308819] libata version 3.00 loaded.
[    1.506618] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:16:18:ee:48
[    1.506621] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.506649] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
[    1.507026] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.508597] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.508606] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9
[    1.508615] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.508639] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000030a0
[    1.508863] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[    1.508865] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.508868] usb usb9: Product: UHCI Host Controller
[    1.508870] usb usb9: Manufacturer: Linux 4.9.0-2-amd64 uhci_hcd
[    1.508872] usb usb9: SerialNumber: 0000:00:1d.1
[    1.509081] hub 9-0:1.0: USB hub found
[    1.509093] hub 9-0:1.0: 2 ports detected
[    1.509395] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.509402] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
[    1.509413] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.509437] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000030c0
[    1.509604] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[    1.509607] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.509609] usb usb10: Product: UHCI Host Controller
[    1.509611] usb usb10: Manufacturer: Linux 4.9.0-2-amd64 uhci_hcd
[    1.509613] usb usb10: SerialNumber: 0000:00:1d.2
[    1.509809] hub 10-0:1.0: USB hub found
[    1.509821] hub 10-0:1.0: 2 ports detected
[    1.510239] ahci 0000:00:1f.2: version 3.0
[    1.510470] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.510499] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    1.510502] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ccc 
[    1.514321] scsi host0: ahci
[    1.514525] scsi host1: ahci
[    1.514706] scsi host2: ahci
[    1.514885] scsi host3: ahci
[    1.514981] ata1: SATA max UDMA/133 abar m2048@0xe1b25000 port 0xe1b25100 irq 32
[    1.514984] ata2: SATA max UDMA/133 abar m2048@0xe1b25000 port 0xe1b25180 irq 32
[    1.514986] ata3: DUMMY
[    1.514987] ata4: DUMMY
[    1.831913] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.833851] random: fast init done
[    1.834237] ata1.00: NCQ Send/Recv Log not supported
[    1.834239] ata1.00: ATA-9: SAMSUNG MZMTE512HMHP-000MV, EXT42M0Q, max UDMA/133
[    1.834241] ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.834944] ata1.00: NCQ Send/Recv Log not supported
[    1.834995] ata1.00: configured for UDMA/133
[    1.835239] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG MZMTE512 2M0Q PQ: 0 ANSI: 5
[    1.868271] usb 1-5: new high-speed USB device number 3 using ehci-pci
[    1.916048] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x35d0937dfc0, max_idle_ns: 881590439997 ns
[    2.004047] usb 6-2: new full-speed USB device number 2 using uhci_hcd
[    2.016437] usb 1-5: New USB device found, idVendor=0424, idProduct=2514
[    2.016440] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.017308] hub 1-5:1.0: USB hub found
[    2.017434] hub 1-5:1.0: 4 ports detected
[    2.129350] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    2.147600] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input2
[    2.179419] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.183494] ata2.00: ATAPI: HL-DT-ST DVDRW  GS22N, CP06, max UDMA/133
[    2.188319] ata2.00: configured for UDMA/133
[    2.190096] usb 6-2: New USB device found, idVendor=0a5c, idProduct=21e6
[    2.190099] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.190101] usb 6-2: Product: BCM20702A0
[    2.190103] usb 6-2: Manufacturer: Broadcom Corp
[    2.190105] usb 6-2: SerialNumber: 2CD05A7FAEEC
[    2.193771] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRW  GS22N     CP06 PQ: 0 ANSI: 5
[    2.210595] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
[    2.210696] sd 0:0:0:0: [sda] Write Protect is off
[    2.210700] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.210732] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.214279]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10
[    2.215356] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.235000] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
[    2.235003] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.235384] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.347272] md: linear personality registered for level -1
[    2.349889] md: multipath personality registered for level -4
[    2.352483] md: raid0 personality registered for level 0
[    2.355753] md: raid1 personality registered for level 1
[    2.460009] raid6: sse2x1   gen()  2575 MB/s
[    2.528017] raid6: sse2x1   xor()  2705 MB/s
[    2.596013] raid6: sse2x2   gen()  3517 MB/s
[    2.664017] raid6: sse2x2   xor()  3323 MB/s
[    2.732021] raid6: sse2x4   gen()  4685 MB/s
[    2.800011] raid6: sse2x4   xor()  3733 MB/s
[    2.800013] raid6: using algorithm sse2x4 gen() 4685 MB/s
[    2.800014] raid6: .... xor() 3733 MB/s, rmw enabled
[    2.800015] raid6: using ssse3x2 recovery algorithm
[    2.800973] xor: measuring software checksum speed
[    2.840011]    prefetch64-sse:  6434.000 MB/sec
[    2.880010]    generic_sse:  5695.000 MB/sec
[    2.880012] xor: using function: prefetch64-sse (6434.000 MB/sec)
[    2.880929] async_tx: api initialized (async)
[    2.888508] md: raid6 personality registered for level 6
[    2.888510] md: raid5 personality registered for level 5
[    2.888511] md: raid4 personality registered for level 4
[    2.895918] md: raid10 personality registered for level 10
[    2.964945] Btrfs loaded, crc32c=crc32c-generic
[    3.233778] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    3.358982] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.366143] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    3.366310] systemd[1]: Detected architecture x86-64.
[    3.366504] systemd[1]: Set hostname to <universi-if9ee1>.
[    3.521743] systemd[1]: fancontrol.service: Cannot add dependency job, ignoring: Unit fancontrol.service is masked.
[    3.521782] systemd[1]: dnssec-triggerd.service: Cannot add dependency job, ignoring: Unit dnssec-triggerd.service is masked.
[    3.521806] systemd[1]: isatapd.service: Cannot add dependency job, ignoring: Unit isatapd.service is masked.
[    3.521811] systemd[1]: postgresql.service: Cannot add dependency job, ignoring: Unit postgresql.service is masked.
[    3.523413] systemd[1]: Created slice System Slice.
[    3.523520] systemd[1]: Listening on fsck to fsckd communication Socket.
[    3.523571] systemd[1]: Listening on RPCbind Server Activation Socket.
[    3.578789] EXT4-fs (sda4): re-mounted. Opts: discard,user_xattr,errors=remount-ro
[    3.588114] RPC: Registered named UNIX socket transport module.
[    3.588115] RPC: Registered udp transport module.
[    3.588116] RPC: Registered tcp transport module.
[    3.588117] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.604959] lp: driver loaded but no devices found
[    3.607794] ppdev: user-space parallel port driver
[    3.700717] drbd: initialized. Version: 8.4.7 (api:1/proto:86-101)
[    3.700720] drbd: srcversion: 0904DF2CCF7283ACE07D07A 
[    3.700721] drbd: registered as block device major 147
[    3.925604] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input3
[    3.925610] ACPI: Sleep Button [SLPB]
[    3.927535] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input4
[    3.928558] ACPI: Lid Switch [LID]
[    3.928652] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    3.928655] ACPI: Power Button [PWRF]
[    3.943407] ACPI: AC Adapter [AC] (on-line)
[    3.950667] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.954762] acpi device:04: registered as cooling_device2
[    3.954868] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    3.991447] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.991823] ACPI: Battery Slot [BAT0] (battery present)
[    3.991965] ACPI: Battery Slot [BAT1] (battery absent)
[    3.992990] Non-volatile memory driver v1.3
[    4.002703] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    4.002705] thinkpad_acpi: http://ibm-acpi.sf.net/
[    4.002706] thinkpad_acpi: ThinkPad BIOS CBET4000 4.5-1544-g2f6b52e3a0-dirty, EC 7XHT25WW-3.6
[    4.002707] thinkpad_acpi: Lenovo ThinkPad X200s, model 7470AE7
[    4.005930] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[    4.005947] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    4.005947] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    4.014329] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    4.016147] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    4.033842] [drm] Initialized
[    4.037419] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[    4.108840] pci 0000:00:00.0: Intel GM45 Chipset
[    4.108861] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    4.110453] pci 0000:00:00.0: detected 262144K stolen memory
[    4.110482] [drm] Memory usable by graphics device = 2048M
[    4.110488] checking generic (d0000000 500000) vs hw (d0000000 10000000)
[    4.110489] fb: switching to inteldrmfb from EFI VGA
[    4.110552] Console: switching to colour dummy device 80x25
[    4.112162] snd_hda_codec_conexant hdaudioC0D0: CX20561 (Hermosa): BIOS auto-probing.
[    4.112711] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20561 (Hermosa): line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
[    4.112713] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.112715] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=2 (0x19/0x16/0x0/0x0/0x0)
[    4.112717] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[    4.112718] snd_hda_codec_conexant hdaudioC0D0:    dig-out=0x1c/0x0
[    4.112720] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[    4.112722] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x18
[    4.112723] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x1d
[    4.112725] snd_hda_codec_conexant hdaudioC0D0:      Dock Mic=0x17
[    4.113823] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[    4.116079] [drm] Replacing VGA console driver
[    4.116156] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.116157] [drm] Driver supports precise vblank timestamp query.
[    4.116162] i915 0000:00:02.0: Invalid PCI ROM data signature: expecting 0x52494350, got 0xe935aa55
[    4.116167] [drm] failed to find VBIOS tables
[    4.116472] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.122005] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    4.122342] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    4.122389] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    4.122435] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    4.122480] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    4.138319] ath: phy0: Killer Wireless card detected
[    4.147693] ath: EEPROM regdomain: 0x60
[    4.147694] ath: EEPROM indicates we should expect a direct regpair map
[    4.147696] ath: Country alpha2 being used: 00
[    4.147697] ath: Regpair used: 0x60
[    4.152893] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    4.153196] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffc3ba41080000, irq=17
[    4.161906] ath: EEPROM regdomain: 0x6a
[    4.161907] ath: EEPROM indicates we should expect a direct regpair map
[    4.161909] ath: Country alpha2 being used: 00
[    4.161910] ath: Regpair used: 0x6a
[    4.163185] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[    4.163475] ieee80211 phy1: Atheros AR9300 Rev:3 mem=0xffffc3ba41020000, irq=18
[    4.308541] [drm] RC6 disabled, disabling runtime PM support
[    4.309266] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    4.309391] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20160831/utaddress-247)
[    4.309398] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.309401] ACPI Warning: SystemIO range 0x00000000000005B0-0x00000000000005BF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20160831/utaddress-247)
[    4.309404] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.309405] ACPI Warning: SystemIO range 0x0000000000000580-0x00000000000005AF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20160831/utaddress-247)
[    4.309409] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.309410] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    4.361295] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.361344] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    4.508063] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[    4.521306] EXT4-fs (sda3): mounted filesystem without journal. Opts: discard,user_xattr
[    4.529886] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    4.584016] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    4.596403] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    4.600390] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    4.624708] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    4.650824] systemd-journald[243]: Received request to flush runtime journal from PID 1
[    4.669774] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    4.673413] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    4.680103] input: PC Speaker as /devices/platform/pcspkr/input/input13
[    4.781031] intel_powerclamp: No package C-state available
[    4.808860] intel_powerclamp: No package C-state available
[    5.005162] random: crng init done
[    5.097352] iTCO_vendor_support: vendor-support=0
[    5.098952] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    5.099002] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0560)
[    5.099126] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.373606] Bluetooth: Core ver 2.22
[    5.375817] NET: Registered protocol family 31
[    5.375819] Bluetooth: HCI device and connection manager initialized
[    5.375825] Bluetooth: HCI socket layer initialized
[    5.375829] Bluetooth: L2CAP socket layer initialized
[    5.375838] Bluetooth: SCO socket layer initialized
[    5.389543] usbcore: registered new interface driver btusb
[    5.408175] Bluetooth: hci0: BCM: chip id 63
[    5.440095] Bluetooth: hci0: universi-if9ee1
[    5.444215] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[    5.444455] bluetooth hci0: firmware: failed to load brcm/BCM20702A1-0a5c-21e6.hcd (-2)
[    5.444462] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
[    5.444464] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
[    5.450123] nfc: nfc_init: NFC Core ver 0.1
[    5.450564] NET: Registered protocol family 39
[    5.610848] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    5.610850] Bluetooth: BNEP filters: protocol multicast
[    5.610858] Bluetooth: BNEP socket layer initialized
[    6.168910] fbcon: inteldrmfb (fb0) is primary device
[    9.706376] Console: switching to colour frame buffer device 180x56
[    9.729738] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    9.797653] systemd[1]: apt-daily.timer: Adding 5h 8min 5.470899s random time.
[   10.417540] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   10.444157] Ebtables v2.0 registered
[   11.258231] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.464248] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.498968] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   11.509728] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   11.526181] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   11.559933] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   11.569005] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   11.582915] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   12.308446] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   12.327589] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.664884] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[   13.665024] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   14.788125] e1000e: eth0 NIC Link is Down
[   17.072887] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[   18.184125] e1000e: eth0 NIC Link is Down
[   20.436886] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[   21.112125] e1000e: eth0 NIC Link is Down
[   26.950046] thinkpad_ec: loading out-of-tree module taints kernel.
[   26.950108] thinkpad_ec: module verification failed: signature and/or required key missing - tainting kernel
[   26.950504] thinkpad_ec: thinkpad_ec 0.42 loaded.
[   26.951158] tp_smapi 0.42 loading...
[   26.951165] SMAPI not supported (ID=0x67)
[   26.951170] tp_smapi init failed (ret=-6)!
[   27.047579] tp_smapi 0.42 loading...
[   27.047589] SMAPI not supported (ID=0x67)
[   27.047593] tp_smapi init failed (ret=-6)!
[   29.073841] Bluetooth: RFCOMM TTY layer initialized
[   29.073848] Bluetooth: RFCOMM socket layer initialized
[   29.073854] Bluetooth: RFCOMM ver 1.11
[   33.760884] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx