[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.60-1+deb7u3
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=7d581789-2cdd-423e-9a8b-b89626891401 ro quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 0000000000001000 type 16
[    0.000000]  BIOS-e820: 0000000000001000 - 00000000000a0000 (usable)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bdac5000 (usable)
[    0.000000]  BIOS-e820: 00000000bdac5000 - 00000000bdc00000 type 16
[    0.000000]  BIOS-e820: 00000000bdc00000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Lenovo 7458CY9/7458CY9, BIOS CBET4000 4.0-6728-g8801011 08/16/2014
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x13c000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FFFF00000 uncachable
[    0.000000]   1 base 0BDC00000 mask FFFC00000 uncachable
[    0.000000]   2 base 0BE000000 mask FFE000000 uncachable
[    0.000000]   3 base 0C0000000 mask FF0000000 uncachable
[    0.000000]   4 base 0D0000000 mask FF0000000 write-combining
[    0.000000]   5 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] last_pfn = 0xbdac5 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000f0000] f0000
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000bdac5000
[    0.000000]  0000000000 - 00bda00000 page 2M
[    0.000000]  00bda00000 - 00bdac5000 page 4k
[    0.000000] kernel direct mapping tables up to bdac5000 @ 1fffb000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-000000013c000000
[    0.000000]  0100000000 - 013c000000 page 2M
[    0.000000] kernel direct mapping tables up to 13c000000 @ bdac3000-bdac5000
[    0.000000] RAMDISK: 36bee000 - 375ef000
[    0.000000] ACPI: RSDP 00000000000f0400 00024 (v02 CORE  )
[    0.000000] ACPI: XSDT 00000000bdbce0e0 00054 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 00000000bdbce210 00038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 00000000bdbce250 00068 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: MCFG 00000000bdbce2c0 0003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DMAR 00000000bdbce300 000A8 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 00000000bdbd1ae0 000F4 (v03 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 00000000bdbce3f0 035E1 (v03 COREv4 COREBOOT 20090419 INTL 20140724)
[    0.000000] ACPI: FACS 00000000bdbce3b0 00040
[    0.000000] ACPI: SSDT 00000000bdbd1be0 002EC (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000013c000000
[    0.000000] Initmem setup node 0 0000000000000000-000000013c000000
[    0.000000]   NODE_DATA [000000013bffb000 - 000000013bffffff]
[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880137600000-ffff88013adfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0013c000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x000000a0
[    0.000000]     0: 0x00000100 -> 0x000bdac5
[    0.000000]     0: 0x00100000 -> 0x0013c000
[    0.000000] On node 0 totalpages: 1022549
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3922 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 758525 pages, LIFO batch:31
[    0.000000]   Normal zone: 3360 pages used for memmap
[    0.000000]   Normal zone: 242400 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000010000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bdac5000 - 00000000bdc00000
[    0.000000] PM: Registered nosave memory: 00000000bdc00000 - 00000000c0000000
[    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[    0.000000] PM: Registered nosave memory: 00000000f4000000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:30000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013bc00000 s82944 r8192 d23552 u1048576
[    0.000000] pcpu-alloc: s82944 r8192 d23552 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1004847
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=7d581789-2cdd-423e-9a8b-b89626891401 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3947796k/5177344k available (3431k kernel code, 1087148k absent, 142400k reserved, 3308k data, 580k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:512 16
[    0.000000] Extended CMOS year: 300
[    0.000000] WARNING: Persistent clock returned invalid value!
[    0.000000]          Check your CMOS/BIOS settings.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Detected 2400.378 MHz processor.
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.75 BogoMIPS (lpj=9601512)
[    0.004010] pid_max: default: 32768 minimum: 301
[    0.004069] Security Framework initialized
[    0.004076] AppArmor: AppArmor disabled by boot time parameter
[    0.004540] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.010063] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.011108] Mount-cache hash table entries: 256
[    0.011282] Initializing cgroup subsys cpuacct
[    0.011289] Initializing cgroup subsys memory
[    0.011305] Initializing cgroup subsys devices
[    0.011309] Initializing cgroup subsys freezer
[    0.011312] Initializing cgroup subsys net_cls
[    0.011315] Initializing cgroup subsys blkio
[    0.011324] Initializing cgroup subsys perf_event
[    0.011366] CPU: Physical Processor ID: 0
[    0.011369] CPU: Processor Core ID: 0
[    0.011372] mce: CPU supports 6 MCE banks
[    0.011382] CPU0: Thermal monitoring enabled (TM2)
[    0.011387] using mwait in idle threads.
[    0.012066] ACPI: Core revision 20110623
[    0.016094] DMAR: Host address width 40
[    0.016098] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.016116] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020e30260 ecap 1000
[    0.016119] DMAR: DRHD base: 0x000000fed91000 flags: 0x0
[    0.016127] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c0000020630260 ecap 1000
[    0.016130] DMAR: DRHD base: 0x000000fed92000 flags: 0x0
[    0.016138] IOMMU 2: reg_base_addr fed92000 ver 1:0 cap c0000020630270 ecap 1000
[    0.016141] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[    0.016148] IOMMU 3: reg_base_addr fed93000 ver 1:0 cap c9008020630260 ecap 1000
[    0.016619] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.056609] CPU0: Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz stepping 06
[    0.060003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.060003] ... version:                2
[    0.060003] ... bit width:              40
[    0.060003] ... generic registers:      2
[    0.060003] ... value mask:             000000ffffffffff
[    0.060003] ... max period:             000000007fffffff
[    0.060003] ... fixed-purpose events:   3
[    0.060003] ... event mask:             0000000700000003
[    0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.060003] Booting Node   0, Processors  #1 Ok.
[    0.060003] smpboot cpu 1: start_ip = 9a000
[    0.148043] NMI watchdog enabled, takes one hw-pmu counter.
[    0.148089] Brought up 2 CPUs
[    0.148093] Total of 2 processors activated (9600.90 BogoMIPS).
[    0.150664] devtmpfs: initialized
[    0.155286] print_constraints: dummy: 
[    0.155286] NET: Registered protocol family 16
[    0.155286] ACPI: bus type pci registered
[    0.155286] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.155286] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.163659] PCI: Using configuration type 1 for base access
[    0.164580] bio: create slab <bio-0> at 0
[    0.164580] ACPI: Added _OSI(Module Device)
[    0.164580] ACPI: Added _OSI(Processor Device)
[    0.164580] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.164580] ACPI: Added _OSI(Processor Aggregator Device)
[    0.165265] ACPI: EC: Look up EC in DSDT
[    0.169001] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.169455] ACPI: Interpreter enabled
[    0.169462] ACPI: (supports S0 S3 S4 S5)
[    0.169494] ACPI: Using IOAPIC for interrupt routing
[    0.176892] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[    0.177099] ACPI: No dock devices found.
[    0.177102] HEST: Table not found.
[    0.177107] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.177226] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.177414] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.177418] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.177422] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.177425] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[    0.177429] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[    0.177432] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[    0.177435] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[    0.177439] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[    0.177442] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    0.177445] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    0.177449] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[    0.177452] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[    0.177455] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[    0.177458] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[    0.177462] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[    0.177465] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
[    0.177469] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[    0.177472] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[    0.177493] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[    0.177518] DMAR: Forcing write-buffer flush capability
[    0.177520] DMAR: Disabling IOMMU for graphics on this chipset
[    0.177552] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
[    0.177567] pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe03fffff 64bit]
[    0.177577] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.177585] pci 0000:00:02.0: reg 20: [io  0x1c00-0x1c07]
[    0.177629] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
[    0.177642] pci 0000:00:02.1: reg 10: [mem 0xe0400000-0xe04fffff 64bit]
[    0.177704] pci 0000:00:03.0: [8086:2a44] type 0 class 0x000780
[    0.177723] pci 0000:00:03.0: reg 10: [mem 0xe0626100-0xe062610f 64bit]
[    0.177783] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.177856] pci 0000:00:19.0: [8086:10f5] type 0 class 0x000200
[    0.177884] pci 0000:00:19.0: reg 10: [mem 0xe0600000-0xe061ffff]
[    0.177898] pci 0000:00:19.0: reg 14: [mem 0xe0624000-0xe0624fff]
[    0.177911] pci 0000:00:19.0: reg 18: [io  0x1800-0x181f]
[    0.178010] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.178042] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[    0.178105] pci 0000:00:1a.0: reg 20: [io  0x1820-0x183f]
[    0.178181] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[    0.178243] pci 0000:00:1a.1: reg 20: [io  0x1840-0x185f]
[    0.178320] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
[    0.178382] pci 0000:00:1a.2: reg 20: [io  0x1860-0x187f]
[    0.178471] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[    0.178500] pci 0000:00:1a.7: reg 10: [mem 0xe0625800-0xe0625bff]
[    0.178620] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.178660] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[    0.178684] pci 0000:00:1b.0: reg 10: [mem 0xe0620000-0xe0623fff 64bit]
[    0.178792] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.178828] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[    0.178941] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.178980] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
[    0.179092] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.179131] pci 0000:00:1c.2: [8086:2944] type 1 class 0x000604
[    0.179244] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.179282] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
[    0.179396] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.179440] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[    0.179503] pci 0000:00:1d.0: reg 20: [io  0x1880-0x189f]
[    0.179583] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[    0.179645] pci 0000:00:1d.1: reg 20: [io  0x18a0-0x18bf]
[    0.179722] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[    0.179784] pci 0000:00:1d.2: reg 20: [io  0x18c0-0x18df]
[    0.179874] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[    0.179902] pci 0000:00:1d.7: reg 10: [mem 0xe0625c00-0xe0625fff]
[    0.180034] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.180069] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.180172] pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601
[    0.180352] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[    0.180383] pci 0000:00:1f.2: reg 10: [io  0x1c08-0x1c0f]
[    0.180396] pci 0000:00:1f.2: reg 14: [io  0x1c18-0x1c1b]
[    0.180409] pci 0000:00:1f.2: reg 18: [io  0x1c10-0x1c17]
[    0.180422] pci 0000:00:1f.2: reg 1c: [io  0x1c1c-0x1c1f]
[    0.180435] pci 0000:00:1f.2: reg 20: [io  0x18e0-0x18ff]
[    0.180449] pci 0000:00:1f.2: reg 24: [mem 0xe0625000-0xe06257ff]
[    0.180526] pci 0000:00:1f.2: PME# supported from D3hot
[    0.180557] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[    0.180581] pci 0000:00:1f.3: reg 10: [mem 0xe0626000-0xe06260ff 64bit]
[    0.180614] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
[    0.180719] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.180832] pci 0000:02:00.0: [8086:4236] type 0 class 0x000280
[    0.180875] pci 0000:02:00.0: reg 10: [mem 0xe0500000-0xe0501fff 64bit]
[    0.181079] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.188037] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.188046] pci 0000:00:1c.1:   bridge window [mem 0xe0500000-0xe05fffff]
[    0.188116] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[    0.188192] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[    0.188298] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[    0.188314] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.188317] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.188321] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.188324] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[    0.188328] pci 0000:00:1e.0:   bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[    0.188332] pci 0000:00:1e.0:   bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[    0.188335] pci 0000:00:1e.0:   bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
[    0.188339] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.188343] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.188346] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.188350] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.188353] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.188357] pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    0.188361] pci 0000:00:1e.0:   bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[    0.188364] pci 0000:00:1e.0:   bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[    0.188368] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[    0.188372] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[    0.188376] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[    0.188412] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.188605] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.188674] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.188742] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.188808] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.188924] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.189280]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.189327]  pci0000:00: ACPI _OSC control (0x1d) granted
[    0.199846] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.199920] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.199991] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.200077] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.200148] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.200220] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.200294] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.200367] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.200488] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.200488] vgaarb: loaded
[    0.200488] vgaarb: bridge control possible 0000:00:02.0
[    0.200488] PCI: Using ACPI for IRQ routing
[    0.202622] PCI: pci_cache_line_size set to 64 bytes
[    0.202745] reserve RAM buffer: 00000000bdac5000 - 00000000bfffffff 
[    0.202892] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.202899] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.202906] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.208179] Switching to clocksource hpet
[    0.210622] pnp: PnP ACPI init
[    0.210645] ACPI: bus type pnp registered
[    0.210742] pnp 00:00: [bus 00-ff]
[    0.210746] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.210749] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.210752] pnp 00:00: [io  0x0d00-0xffff window]
[    0.210755] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.210758] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.210762] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.210765] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.210768] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.210771] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.210774] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.210777] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.210780] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.210783] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.210786] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.210789] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.210793] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.210796] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.210799] pnp 00:00: [mem 0xc0000000-0xfebfffff window]
[    0.210802] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.210879] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.210908] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[    0.210911] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[    0.210914] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[    0.210917] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[    0.210920] pnp 00:01: [mem 0xf0000000-0xf3ffffff]
[    0.210922] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[    0.210925] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[    0.210928] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[    0.210997] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.211002] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.211006] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.211010] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.211014] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.211018] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.211022] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.211026] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.211031] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.211628] pnp 00:02: [io  0x0000-0x001f]
[    0.211632] pnp 00:02: [io  0x0081-0x0091]
[    0.211635] pnp 00:02: [io  0x0093-0x009f]
[    0.211638] pnp 00:02: [io  0x00c0-0x00df]
[    0.211641] pnp 00:02: [dma 4]
[    0.211705] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.211720] pnp 00:03: [mem 0xff000000-0xffffffff]
[    0.211812] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[    0.211920] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    0.212029] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.212034] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.212052] pnp 00:05: [io  0x00f0]
[    0.212063] pnp 00:05: [irq 13]
[    0.212123] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.212143] pnp 00:06: [io  0x002e-0x002f]
[    0.212146] pnp 00:06: [io  0x004e-0x004f]
[    0.212148] pnp 00:06: [io  0x0061]
[    0.212151] pnp 00:06: [io  0x0063]
[    0.212153] pnp 00:06: [io  0x0065]
[    0.212155] pnp 00:06: [io  0x0067]
[    0.212192] pnp 00:06: [io  0x0080]
[    0.212194] pnp 00:06: [io  0x0092]
[    0.212197] pnp 00:06: [io  0x00b2-0x00b3]
[    0.212200] pnp 00:06: [io  0x0800-0x080f]
[    0.212202] pnp 00:06: [io  0x0600-0x067f]
[    0.212205] pnp 00:06: [io  0x0580-0x05bf]
[    0.212345] system 00:06: [io  0x0800-0x080f] has been reserved
[    0.212350] system 00:06: [io  0x0600-0x067f] has been reserved
[    0.212354] system 00:06: [io  0x0580-0x05bf] has been reserved
[    0.212359] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.212373] pnp 00:07: [io  0x0070-0x0077]
[    0.212433] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.212461] pnp 00:08: [io  0x0060]
[    0.212463] pnp 00:08: [io  0x0064]
[    0.212471] pnp 00:08: [irq 1]
[    0.212535] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.212563] pnp 00:09: [irq 12]
[    0.212627] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.212656] pnp: PnP ACPI: found 10 devices
[    0.212659] ACPI: ACPI bus type pnp unregistered
[    0.220659] PCI: max bus depth: 1 pci_try_num: 2
[    0.220722] pci 0000:00:1c.3: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[    0.220730] pci 0000:00:1c.3: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.220736] pci 0000:00:1c.3: BAR 13: assigned [io  0x2000-0x2fff]
[    0.220740] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.220756] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.220763] pci 0000:00:1c.1:   bridge window [mem 0xe0500000-0xe05fffff]
[    0.220775] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[    0.220790] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[    0.220795] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.220802] pci 0000:00:1c.3:   bridge window [mem 0xc0000000-0xc01fffff]
[    0.220808] pci 0000:00:1c.3:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.220818] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[    0.220856] pci 0000:00:1c.0: setting latency timer to 64
[    0.220865] pci 0000:00:1c.1: can't derive routing for PCI INT B
[    0.220868] pci 0000:00:1c.1: PCI INT B: no GSI - using ISA IRQ 11
[    0.220881] pci 0000:00:1c.1: setting latency timer to 64
[    0.220890] pci 0000:00:1c.2: can't derive routing for PCI INT C
[    0.220892] pci 0000:00:1c.2: PCI INT C: no GSI - using ISA IRQ 11
[    0.220902] pci 0000:00:1c.2: setting latency timer to 64
[    0.220910] pci 0000:00:1c.3: enabling device (0104 -> 0107)
[    0.220915] pci 0000:00:1c.3: can't derive routing for PCI INT D
[    0.220917] pci 0000:00:1c.3: PCI INT D: no GSI - using ISA IRQ 11
[    0.220926] pci 0000:00:1c.3: setting latency timer to 64
[    0.220939] pci 0000:00:1e.0: setting latency timer to 64
[    0.220944] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.220947] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.220950] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.220954] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.220957] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.220960] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.220963] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[    0.220966] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.220969] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.220972] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.220975] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[    0.220978] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.220981] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.220984] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[    0.220987] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[    0.220990] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[    0.220993] pci_bus 0000:00: resource 20 [mem 0xc0000000-0xfebfffff]
[    0.220997] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
[    0.221000] pci_bus 0000:02: resource 1 [mem 0xe0500000-0xe05fffff]
[    0.221004] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    0.221007] pci_bus 0000:04: resource 1 [mem 0xc0000000-0xc01fffff]
[    0.221010] pci_bus 0000:04: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.221014] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.221017] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.221020] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.221023] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.221026] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.221029] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.221032] pci_bus 0000:05: resource 10 [mem 0x000cc000-0x000cffff]
[    0.221035] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.221038] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.221041] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.221044] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff]
[    0.221047] pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.221050] pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.221053] pci_bus 0000:05: resource 17 [mem 0x000e8000-0x000ebfff]
[    0.221056] pci_bus 0000:05: resource 18 [mem 0x000ec000-0x000effff]
[    0.221060] pci_bus 0000:05: resource 19 [mem 0x000f0000-0x000fffff]
[    0.221063] pci_bus 0000:05: resource 20 [mem 0xc0000000-0xfebfffff]
[    0.221066] pci_bus 0000:05: resource 21 [mem 0xfed40000-0xfed44fff]
[    0.221143] NET: Registered protocol family 2
[    0.221346] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.222834] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.226877] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.227403] TCP: Hash tables configured (established 524288 bind 65536)
[    0.227407] TCP reno registered
[    0.227419] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.227465] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.227654] NET: Registered protocol family 1
[    0.227677] pci 0000:00:02.0: Boot video device
[    0.228045] PCI: CLS 64 bytes, default 64
[    0.228117] Unpacking initramfs...
[    0.553670] Freeing initrd memory: 10244k freed
[    0.557687] DMAR: Device scope device [0000:00:03.01] not found
[    0.557691] DMAR: Device scope device [0000:00:03.01] not found
[    0.557694] DMAR: Device scope device [0000:00:03.02] not found
[    0.557697] DMAR: Device scope device [0000:00:03.02] not found
[    0.557700] DMAR: Device scope device [0000:00:03.03] not found
[    0.557702] DMAR: Device scope device [0000:00:03.03] not found
[    0.557708] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.557713] Placing 64MB software IO TLB between ffff8800b9ac3000 - ffff8800bdac3000
[    0.557716] software IO TLB at phys 0xb9ac3000 - 0xbdac3000
[    0.558321] audit: initializing netlink socket (disabled)
[    0.558337] type=2000 audit(0.552:1): initialized
[    0.576954] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.577944] VFS: Disk quotas dquot_6.5.2
[    0.577987] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.578082] msgmni has been set to 7730
[    0.578295] alg: No test for stdrng (krng)
[    0.578334] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.578339] io scheduler noop registered
[    0.578341] io scheduler deadline registered
[    0.578361] io scheduler cfq registered (default)
[    0.578488] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.578554] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.578679] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.578738] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.578859] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.578918] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    0.579043] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.579101] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    0.579280] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.579287] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.579316] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.579320] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.579326] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.579354] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    0.579360] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    0.579386] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.579393] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.579419] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.579499] pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 2946 ss_vid 17aa ss_did 20f3
[    0.579533] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
[    0.579546] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.579549] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.580102] efifb: probing for efifb
[    0.580875] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90005100000, using 4032k, total 4032k
[    0.580879] efifb: mode is 1280x800x32, linelength=5120, pages=1
[    0.580881] efifb: scrolling: redraw
[    0.580884] efifb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.585674] Console: switching to colour frame buffer device 160x50
[    0.590326] fb0: EFI VGA frame buffer device
[    0.590338] intel_idle: does not run on family 6 model 23
[    0.590374] ERST: Table is not found!
[    0.590377] GHES: HEST is not enabled!
[    0.590458] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.636548] Linux agpgart interface v0.103
[    0.636673] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[    0.636794] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    0.638242] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    0.638405] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    0.638581] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.653013] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.653024] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.653222] mousedev: PS/2 mouse device common for all mice
[    0.653289] rtc_cmos 00:07: RTC can wake from S4
[    0.653444] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    0.653479] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.653493] cpuidle: using governor ladder
[    0.653496] cpuidle: using governor menu
[    0.653763] TCP cubic registered
[    0.653820] NET: Registered protocol family 10
[    0.654445] Mobile IPv6
[    0.654448] NET: Registered protocol family 17
[    0.654454] Registering the dns_resolver key type
[    0.654644] PM: Hibernation image not present or could not be loaded.
[    0.654660] registered taskstats version 1
[    0.655454] rtc_cmos 00:07: setting system clock to 2014-08-16 07:52:41 UTC (1408175561)
[    0.655497] Initializing network drop monitor service
[    0.657426] Freeing unused kernel memory: 580k freed
[    0.657589] Write protecting the kernel read-only data: 6144k
[    0.661277] Freeing unused kernel memory: 648k freed
[    0.665248] Freeing unused kernel memory: 688k freed
[    0.666744] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.680886] udevd[49]: starting version 175
[    0.706798] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    0.706801] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    0.706835] e1000e 0000:00:19.0: can't derive routing for PCI INT A
[    0.706838] e1000e 0000:00:19.0: PCI INT A: no GSI - using ISA IRQ 11
[    0.706860] e1000e 0000:00:19.0: setting latency timer to 64
[    0.706959] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    0.707015] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[    0.759150] SCSI subsystem initialized
[    0.762409] usbcore: registered new interface driver usbfs
[    0.762440] usbcore: registered new interface driver hub
[    0.764648] thermal LNXTHERM:00: registered as thermal_zone0
[    0.764653] ACPI: Thermal Zone [THM0] (35 C)
[    0.766300] thermal LNXTHERM:01: registered as thermal_zone1
[    0.766304] ACPI: Thermal Zone [THM1] (32 C)
[    0.786038] usbcore: registered new device driver usb
[    0.786357] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.786895] libata version 3.00 loaded.
[    0.796856] uhci_hcd: USB Universal Host Controller Interface driver
[    0.944466] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:16:18:14:a3
[    0.944472] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[    0.944502] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
[    0.944580] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.944586] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.944615] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.944658] ehci_hcd 0000:00:1a.7: debug port 1
[    0.948552] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    0.948577] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0625800
[    0.964020] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.964074] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.964078] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.964081] usb usb1: Product: EHCI Host Controller
[    0.964084] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    0.964086] usb usb1: SerialNumber: 0000:00:1a.7
[    0.964240] hub 1-0:1.0: USB hub found
[    0.964246] hub 1-0:1.0: 6 ports detected
[    0.964373] ahci 0000:00:1f.2: version 3.0
[    0.964444] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[    0.964492] ahci: SSS flag set, parallel bus scan disabled
[    0.964524] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    0.964529] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ccc 
[    0.964536] ahci 0000:00:1f.2: setting latency timer to 64
[    0.965188] scsi0 : ahci
[    0.965321] scsi1 : ahci
[    0.965417] scsi2 : ahci
[    0.965512] scsi3 : ahci
[    0.965649] ata1: SATA max UDMA/133 abar m2048@0xe0625000 port 0xe0625100 irq 45
[    0.965654] ata2: SATA max UDMA/133 abar m2048@0xe0625000 port 0xe0625180 irq 45
[    0.965657] ata3: DUMMY
[    0.965659] ata4: DUMMY
[    0.965705] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.965711] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.965724] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[    0.965772] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[    0.965823] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.965826] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.965829] usb usb2: Product: UHCI Host Controller
[    0.965832] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    0.965835] usb usb2: SerialNumber: 0000:00:1a.0
[    0.965993] hub 2-0:1.0: USB hub found
[    0.965999] hub 2-0:1.0: 2 ports detected
[    0.966108] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.966113] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.966124] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
[    0.966169] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001840
[    0.966216] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.966220] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.966223] usb usb3: Product: UHCI Host Controller
[    0.966225] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    0.966228] usb usb3: SerialNumber: 0000:00:1a.1
[    0.966476] hub 3-0:1.0: USB hub found
[    0.966482] hub 3-0:1.0: 2 ports detected
[    0.966589] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.966594] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.966604] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4
[    0.966636] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00001860
[    0.966682] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.966686] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.966689] usb usb4: Product: UHCI Host Controller
[    0.966692] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    0.966694] usb usb4: SerialNumber: 0000:00:1a.2
[    0.967126] hub 4-0:1.0: USB hub found
[    0.967135] hub 4-0:1.0: 2 ports detected
[    0.967246] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.967250] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.967263] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.967296] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001880
[    0.967342] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.967346] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.967349] usb usb5: Product: UHCI Host Controller
[    0.967352] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    0.967355] usb usb5: SerialNumber: 0000:00:1d.0
[    0.967584] hub 5-0:1.0: USB hub found
[    0.967590] hub 5-0:1.0: 2 ports detected
[    0.967700] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.967705] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.967715] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.967748] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018a0
[    0.967794] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.967798] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.967801] usb usb6: Product: UHCI Host Controller
[    0.967804] usb usb6: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    0.967807] usb usb6: SerialNumber: 0000:00:1d.1
[    0.968755] hub 6-0:1.0: USB hub found
[    0.968761] hub 6-0:1.0: 2 ports detected
[    0.968870] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.968874] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.968885] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.968918] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[    0.968966] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.968969] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.968972] usb usb7: Product: UHCI Host Controller
[    0.968975] usb usb7: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    0.968978] usb usb7: SerialNumber: 0000:00:1d.2
[    0.969120] hub 7-0:1.0: USB hub found
[    0.969126] hub 7-0:1.0: 2 ports detected
[    0.969254] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.969259] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.969272] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[    0.969308] ehci_hcd 0000:00:1d.7: debug port 1
[    0.973209] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.973255] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xe0625c00
[    0.988028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.988053] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[    0.988056] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.988059] usb usb8: Product: EHCI Host Controller
[    0.988062] usb usb8: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    0.988065] usb usb8: SerialNumber: 0000:00:1d.7
[    0.988222] hub 8-0:1.0: USB hub found
[    0.988228] hub 8-0:1.0: 6 ports detected
[    1.284036] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.284685] ata1.00: ATA-8: SanDisk SDSSDH2256G, X211200, max UDMA/133
[    1.284689] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.285368] ata1.00: configured for UDMA/133
[    1.285528] scsi 0:0:0:0: Direct-Access     ATA      SanDisk SDSSDH22 X211 PQ: 0 ANSI: 5
[    1.500020] usb 8-4: new high-speed USB device number 2 using ehci_hcd
[    1.556023] Refined TSC clocksource calibration: 2400.085 MHz.
[    1.556029] Switching to clocksource tsc
[    1.604019] ata2: SATA link down (SStatus 0 SControl 300)
[    1.609687] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    1.609788] sd 0:0:0:0: [sda] Write Protect is off
[    1.609792] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.609824] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.614934]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[    1.615543] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.617715] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.855925] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    1.961314] usb 8-4: New USB device found, idVendor=0bdb, idProduct=1900
[    1.961319] usb 8-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.961323] usb 8-4: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device
[    1.961326] usb 8-4: Manufacturer: Ericsson
[    1.961328] usb 8-4: SerialNumber: 3541430222940450
[    2.157595] udevd[337]: starting version 175
[    2.272026] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[    2.283767] ACPI: Requesting acpi_cpufreq
[    2.284143] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2d/PNP0C09:00/PNP0C0E:00/input/input1
[    2.284152] ACPI: Sleep Button [SLPB]
[    2.284234] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2d/PNP0C09:00/PNP0C0D:00/input/input2
[    2.285239] ACPI: Lid Switch [LID]
[    2.296620] Monitor-Mwait will be used to enter C-1 state
[    2.296629] Monitor-Mwait will be used to enter C-2 state
[    2.296635] Marking TSC unstable due to TSC halts in idle
[    2.296643] ACPI: acpi_idle registered with cpuidle
[    2.297646] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    2.297657] ACPI: Power Button [PWRF]
[    2.303408] Switching to clocksource hpet
[    2.327698] [drm] Initialized drm 1.1.0 20060810
[    2.340114] iTCO_vendor_support: vendor-support=0
[    2.341715] cfg80211: Calling CRDA to update world regulatory domain
[    2.341957] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    2.342046] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0660)
[    2.342105] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.344151] ACPI: resource 0000:00:1f.3 [io  0x0400-0x041f] conflicts with ACPI region SMBI [io 0x400-0x41f]
[    2.344154] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.352214] acpi device:07: registered as cooling_device2
[    2.352288] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    2.352296] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.363264] checking generic (d0000000 3f0000) vs hw (d0000000 10000000)
[    2.363267] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[    2.363292] Console: switching to colour dummy device 80x25
[    2.363955] i915 0000:00:02.0: setting latency timer to 64
[    2.392464] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[    2.392466] Copyright(c) 2003-2011 Intel Corporation
[    2.392538] iwlwifi 0000:02:00.0: setting latency timer to 64
[    2.392557] iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000
[    2.392559] iwlwifi 0000:02:00.0: pci_resource_base = ffffc90000654000
[    2.392561] iwlwifi 0000:02:00.0: HW Revision ID = 0x0
[    2.392642] iwlwifi 0000:02:00.0: irq 46 for MSI/MSI-X
[    2.392692] iwlwifi 0000:02:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24
[    2.392749] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[    2.414498] iwlwifi 0000:02:00.0: device EEPROM VER=0x11e, CALIB=0x4
[    2.414501] iwlwifi 0000:02:00.0: Device SKU: 0Xf0
[    2.430454] Non-volatile memory driver v1.3
[    2.435337] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    2.440100] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[    2.440131] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.440132] [drm] Driver supports precise vblank timestamp query.
[    2.440216] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.460027] iwlwifi 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[    2.476224] usb 3-1: New USB device found, idVendor=08ff, idProduct=2810
[    2.476227] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.476229] usb 3-1: Product: Fingerprint Sensor
[    2.522358] ACPI: Battery Slot [BAT0] (battery present)
[    2.522623] ACPI: AC Adapter [AC] (off-line)
[    2.523030] ACPI: Battery Slot [BAT1] (battery absent)
[    2.525884] iwlwifi 0000:02:00.0: firmware: agent loaded iwlwifi-5000-5.ucode into memory
[    2.525890] iwlwifi 0000:02:00.0: loaded firmware version 8.83.5.1 build 33692
[    2.526105] Registered led device: phy0-led
[    2.528362] cfg80211: World regulatory domain updated:
[    2.528365] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    2.528368] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    2.528370] cfg80211:     (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[    2.528372] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[    2.528375] cfg80211:     (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[    2.528377] cfg80211:     (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[    2.528379] cfg80211:     (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[    2.548571] cdc_acm 8-4:1.1: ttyACM0: USB ACM device
[    2.549236] cdc_acm 8-4:1.3: ttyACM1: USB ACM device
[    2.549737] cdc_acm 8-4:1.9: ttyACM2: USB ACM device
[    2.550749] usbcore: registered new interface driver cdc_acm
[    2.550751] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.554534] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    2.556512] cdc_ether 8-4:1.7: wwan0: register 'cdc_ether' at usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[    2.556538] usbcore: registered new interface driver cdc_ether
[    2.557263] cdc_wdm 8-4:1.5: cdc-wdm-176: USB WDM device
[    2.557306] cdc_wdm 8-4:1.6: cdc-wdm-175: USB WDM device
[    2.557323] usbcore: registered new interface driver cdc_wdm
[    2.720056] usb 3-2: new full-speed USB device number 3 using uhci_hcd
[    2.743024] fbcon: inteldrmfb (fb0) is primary device
[    2.828082] Console: switching to colour frame buffer device 160x50
[    2.837534] fb0: inteldrmfb frame buffer device
[    2.837539] drm: registered panic notifier
[    2.837570] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.837777] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[    2.837860] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    2.875969] hda_codec: CX20561 (Hermosa): BIOS auto-probing.
[    2.877414] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[    2.889285] usb 3-2: New USB device found, idVendor=0a5c, idProduct=2145
[    2.889312] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.889320] usb 3-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II
[    2.889342] usb 3-2: Manufacturer: Lenovo Computer Corp
[    2.931712] Bluetooth: Core ver 2.16
[    2.931754] NET: Registered protocol family 31
[    2.931756] Bluetooth: HCI device and connection manager initialized
[    2.931759] Bluetooth: HCI socket layer initialized
[    2.931761] Bluetooth: L2CAP socket layer initialized
[    2.931991] Bluetooth: SCO socket layer initialized
[    2.933367] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    2.934755] usbcore: registered new interface driver btusb
[    3.252331] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    3.269588] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7
[    3.312171] EXT4-fs (sda6): re-mounted. Opts: (null)
[    3.377292] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[    3.415126] loop: module loaded
[    3.811559] FAT-fs (sda5): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[    4.291610] RPC: Registered named UNIX socket transport module.
[    4.291613] RPC: Registered udp transport module.
[    4.291615] RPC: Registered tcp transport module.
[    4.291616] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    4.296922] FS-Cache: Loaded
[    4.306028] FS-Cache: Netfs 'nfs' registered for caching
[    4.311440] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    4.865558] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.865561] Bluetooth: BNEP filters: protocol multicast
[    4.868979] Bluetooth: RFCOMM TTY layer initialized
[    4.868985] Bluetooth: RFCOMM socket layer initialized
[    4.868987] Bluetooth: RFCOMM ver 1.11
[    5.044323] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[    5.148170] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[    5.149718] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.156658] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[    5.159544] iwlwifi 0000:02:00.0: Radio type=0x0-0x2-0x0
[    5.248795] lp: driver loaded but no devices found
[    5.254169] ppdev: user-space parallel port driver
[    5.312911] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[    5.315812] iwlwifi 0000:02:00.0: Radio type=0x0-0x2-0x0
[    5.363344] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    5.649266] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input8
[   11.879195] wlan0: authenticate with 00:24:37:96:06:b0 (try 1)
[   11.881487] wlan0: authenticated
[   11.887467] wlan0: associate with 00:24:37:96:06:b0 (try 1)
[   11.890399] wlan0: RX AssocResp from 00:24:37:96:06:b0 (capab=0x451 status=0 aid=3)
[   11.890407] wlan0: associated
[   11.897952] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   22.480040] wlan0: no IPv6 routers present