[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-53-generic (buildd@lcy01-28) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #74-Ubuntu SMP Fri Dec 2 15:59:10 UTC 2016 (Ubuntu 4.4.0-53.74-generic 4.4.30)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-53-generic root=UUID=13e4067c-63c9-4663-a411-358e0a08b5ea ro splash crashkernel=384M-:128M
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x000000007ff19fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ff1a000-0x00000000829fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000037b5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: HP HP EliteBook 2760p/HP EliteBook 2760p, BIOS 4.5-911-g9510156 01/28/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x37b600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 080000000 mask FC0000000 uncachable
[    0.000000]   1 base 0C0000000 mask FF0000000 uncachable
[    0.000000]   2 base 0D0000000 mask FF0000000 write-combining
[    0.000000]   3 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x7ff1a max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[    0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[    0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[    0.000000] BRK [0x02205000, 0x02205fff] PGTABLE
[    0.000000] BRK [0x02206000, 0x02206fff] PGTABLE
[    0.000000] BRK [0x02207000, 0x02207fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3330a000-0x3597cfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F08B0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x000000007FF310E0 000054 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x000000007FF33A60 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x000000007FF31280 0027DF (v03 COREv4 COREBOOT 20141018 INTL 20160831)
[    0.000000] ACPI: FACS 0x000000007FF31240 000040
[    0.000000] ACPI: FACS 0x000000007FF31240 000040
[    0.000000] ACPI: SSDT 0x000000007FF33B60 0016FA (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: MCFG 0x000000007FF35260 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: TCPA 0x000000007FF352A0 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x000000007FF352E0 00006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x000000007FF35350 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000037b5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x37b5f2000-0x37b5f6fff]
[    0.000000] Reserving 128MB of memory at 688MB for crashkernel (System RAM: 12208MB)
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000037b5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x000000007ff19fff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000037b5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000037b5fffff]
[    0.000000] On node 0 totalpages: 3125432
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 158 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8109 pages used for memmap
[    0.000000]   DMA32 zone: 518938 pages, LIFO batch:31
[    0.000000]   Normal zone: 40664 pages used for memmap
[    0.000000]   Normal zone: 2602496 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0x80a00000-0x829fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ff1a000-0x829fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
[    0.000000] e820: [mem 0x82a00000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88037b200000 s98008 r8192 d28968 u524288
[    0.000000] pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 3076437
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-53-generic root=UUID=13e4067c-63c9-4663-a411-358e0a08b5ea ro splash crashkernel=384M-:128M
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 12048696K/12501728K available (8427K kernel code, 1285K rwdata, 3956K rodata, 1480K init, 1292K bss, 453032K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:16640 nr_irqs:456 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2294.790 MHz processor
[    0.000035] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.58 BogoMIPS (lpj=9179160)
[    0.000043] pid_max: default: 32768 minimum: 301
[    0.000052] ACPI: Core revision 20150930
[    0.002384] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.002409] Security Framework initialized
[    0.002414] Yama: becoming mindful.
[    0.002431] AppArmor: AppArmor initialized
[    0.003456] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.006874] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.008350] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.008374] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.008622] Initializing cgroup subsys io
[    0.008629] Initializing cgroup subsys memory
[    0.008638] Initializing cgroup subsys devices
[    0.008642] Initializing cgroup subsys freezer
[    0.008647] Initializing cgroup subsys net_cls
[    0.008651] Initializing cgroup subsys perf_event
[    0.008656] Initializing cgroup subsys net_prio
[    0.008662] Initializing cgroup subsys hugetlb
[    0.008666] Initializing cgroup subsys pids
[    0.008690] CPU: Physical Processor ID: 0
[    0.008694] CPU: Processor Core ID: 0
[    0.008702] mce: CPU supports 7 MCE banks
[    0.008717] CPU0: Thermal monitoring enabled (TM1)
[    0.008727] process: using mwait in idle threads
[    0.008732] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.008736] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.009205] Freeing SMP alternatives memory: 32K (ffffffff820b5000 - ffffffff820bd000)
[    0.011524] ftrace: allocating 32053 entries in 126 pages
[    0.028470] smpboot: Max logical packages: 2
[    0.028478] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.028555] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.028979] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.068669] TSC deadline timer enabled
[    0.068673] smpboot: CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.068699] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.068727] ... version:                3
[    0.068730] ... bit width:              48
[    0.068734] ... generic registers:      4
[    0.068737] ... value mask:             0000ffffffffffff
[    0.068741] ... max period:             0000ffffffffffff
[    0.068744] ... fixed-purpose events:   3
[    0.068748] ... event mask:             000000070000000f
[    0.069586] x86: Booting SMP configuration:
[    0.069591] .... node  #0, CPUs:      #1
[    0.072019] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.072120]  #2 #3
[    0.076856] x86: Booted up 1 node, 4 CPUs
[    0.076865] smpboot: Total of 4 processors activated (18358.32 BogoMIPS)
[    0.080317] devtmpfs: initialized
[    0.083545] evm: security.selinux
[    0.083549] evm: security.SMACK64
[    0.083552] evm: security.SMACK64EXEC
[    0.083555] evm: security.SMACK64TRANSMUTE
[    0.083559] evm: security.SMACK64MMAP
[    0.083562] evm: security.ima
[    0.083565] evm: security.capability
[    0.083718] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.083814] pinctrl core: initialized pinctrl subsystem
[    0.083933] RTC time: 22:54:09, date: 01/28/17
[    0.084054] NET: Registered protocol family 16
[    0.104154] cpuidle: using governor ladder
[    0.124170] cpuidle: using governor menu
[    0.124186] PCCT header not found.
[    0.124310] ACPI: bus type PCI registered
[    0.124314] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.124388] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.124395] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.124407] PCI: Using configuration type 1 for base access
[    0.124446] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.136614] ACPI: Added _OSI(Module Device)
[    0.136619] ACPI: Added _OSI(Processor Device)
[    0.136623] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.136627] ACPI: Added _OSI(Processor Aggregator Device)
[    0.137894] ACPI: Executed 1 blocks of module-level executable AML code
[    0.139089] ACPI: Interpreter enabled
[    0.139108] ACPI: (supports S0 S3 S4 S5)
[    0.139112] ACPI: Using IOAPIC for interrupt routing
[    0.139137] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.141754] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.141764] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.141816] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.141830] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.141885] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c67ff])
[    0.142035] PCI host bridge to bus 0000:00
[    0.142041] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.142045] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.142050] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.142056] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.142063] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.142069] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.142075] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.142082] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.142088] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.142094] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.142101] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.142107] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.142113] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.142119] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.142126] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.142132] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window]
[    0.142139] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.142145] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.142156] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.142246] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.142260] pci 0000:00:02.0: reg 0x10: [mem 0xe1400000-0xe17fffff 64bit]
[    0.142266] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.142271] pci 0000:00:02.0: reg 0x20: [io  0x2000-0x203f]
[    0.142345] pci 0000:00:04.0: [8086:0103] type 00 class 0x118000
[    0.142359] pci 0000:00:04.0: reg 0x10: [mem 0xe1920000-0xe1927fff 64bit]
[    0.142526] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.142791] pci 0000:00:16.0: reg 0x10: [mem 0xe1930000-0xe193000f 64bit]
[    0.143374] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.143507] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.143534] pci 0000:00:19.0: reg 0x10: [mem 0xe1900000-0xe191ffff]
[    0.143543] pci 0000:00:19.0: reg 0x14: [mem 0xe192c000-0xe192cfff]
[    0.143553] pci 0000:00:19.0: reg 0x18: [io  0x2040-0x205f]
[    0.143605] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.143675] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.143705] pci 0000:00:1a.0: reg 0x10: [mem 0xe192e000-0xe192e3ff]
[    0.143779] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.143817] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.143864] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.143893] pci 0000:00:1b.0: reg 0x10: [mem 0xe1928000-0xe192bfff 64bit]
[    0.143959] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.143997] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.144043] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.144115] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.144199] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.144271] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.144348] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[    0.144426] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.144503] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.144578] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.144662] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.144692] pci 0000:00:1d.0: reg 0x10: [mem 0xe192f000-0xe192f3ff]
[    0.144768] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.144804] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.144850] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[    0.145018] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.145047] pci 0000:00:1f.2: reg 0x10: [io  0x2080-0x2087]
[    0.145056] pci 0000:00:1f.2: reg 0x14: [io  0x2090-0x2093]
[    0.145065] pci 0000:00:1f.2: reg 0x18: [io  0x2088-0x208f]
[    0.145074] pci 0000:00:1f.2: reg 0x1c: [io  0x2094-0x2097]
[    0.145084] pci 0000:00:1f.2: reg 0x20: [io  0x2060-0x207f]
[    0.145093] pci 0000:00:1f.2: reg 0x24: [mem 0xe192d000-0xe192d7ff]
[    0.145128] pci 0000:00:1f.2: PME# supported from D3hot
[    0.145245] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.145304] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.145407] pci 0000:03:00.0: [197b:2380] type 00 class 0x0c0010
[    0.145473] pci 0000:03:00.0: reg 0x10: [mem 0xe0810000-0xe08107ff]
[    0.145497] pci 0000:03:00.0: reg 0x14: [mem 0xe0811000-0xe08110ff]
[    0.145758] pci 0000:03:00.1: [197b:2392] type 00 class 0x088000
[    0.145824] pci 0000:03:00.1: reg 0x10: [mem 0xe0812000-0xe08120ff]
[    0.145937] pci 0000:03:00.1: reg 0x30: [mem 0xe0800000-0xe080ffff pref]
[    0.146071] pci 0000:03:00.2: [197b:2391] type 00 class 0x080501
[    0.146136] pci 0000:03:00.2: reg 0x10: [mem 0xe0813000-0xe08130ff]
[    0.146383] pci 0000:03:00.3: [197b:2393] type 00 class 0x088000
[    0.146446] pci 0000:03:00.3: reg 0x10: [mem 0xe0814000-0xe08140ff]
[    0.146698] pci 0000:03:00.4: [197b:2394] type 00 class 0x088000
[    0.146760] pci 0000:03:00.4: reg 0x10: [mem 0xe0815000-0xe08150ff]
[    0.152245] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.152264] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    0.152274] pci 0000:00:1c.2:   bridge window [mem 0xe0000000-0xe08fffff]
[    0.152289] pci 0000:00:1c.2:   bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[    0.152381] pci 0000:04:00.0: [168c:0030] type 00 class 0x028000
[    0.152458] pci 0000:04:00.0: reg 0x10: [mem 0xe1800000-0xe181ffff 64bit]
[    0.152544] pci 0000:04:00.0: reg 0x30: [mem 0xe1820000-0xe182ffff pref]
[    0.152650] pci 0000:04:00.0: supports D1
[    0.152652] pci 0000:04:00.0: PME# supported from D0 D1 D3hot
[    0.160242] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.160265] pci 0000:00:1c.3:   bridge window [mem 0xe1800000-0xe18fffff]
[    0.160415] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.160468] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.160517] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.160565] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.160613] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.160663] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.160711] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.160759] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.160979] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.161056] ec: probe of PNP0C09:00 failed with error -22
[    0.161169] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.161174] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.161182] vgaarb: loaded
[    0.161186] vgaarb: bridge control possible 0000:00:02.0
[    0.161435] SCSI subsystem initialized
[    0.161476] libata version 3.00 loaded.
[    0.161501] ACPI: bus type USB registered
[    0.161521] usbcore: registered new interface driver usbfs
[    0.161532] usbcore: registered new interface driver hub
[    0.161552] usbcore: registered new device driver usb
[    0.161701] PCI: Using ACPI for IRQ routing
[    0.163256] PCI: pci_cache_line_size set to 64 bytes
[    0.163362] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.163364] e820: reserve RAM buffer [mem 0x7ff1a000-0x7fffffff]
[    0.163365] e820: reserve RAM buffer [mem 0x37b600000-0x37bffffff]
[    0.163491] NetLabel: Initializing
[    0.163495] NetLabel:  domain hash size = 128
[    0.163498] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.163513] NetLabel:  unlabeled traffic allowed by default
[    0.163591] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.163600] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.165620] amd_nb: Cannot enumerate AMD northbridges
[    0.165638] clocksource: Switched to clocksource hpet
[    0.171942] AppArmor: AppArmor Filesystem Enabled
[    0.172018] pnp: PnP ACPI init
[    0.172121] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.172126] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.172131] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.172136] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.172140] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.172145] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.172150] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.172154] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.172159] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
[    0.172164] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
[    0.172170] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.172391] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.172398] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.172439] system 00:02: [io  0x0500-0x057f] could not be reserved
[    0.172444] system 00:02: [io  0x0480-0x04bf] has been reserved
[    0.172450] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.172473] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.172506] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.172534] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.172552] pnp: PnP ACPI: found 6 devices
[    0.179252] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.179302] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.179318] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.179333] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.179340] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    0.179348] pci 0000:00:1c.2:   bridge window [mem 0xe0000000-0xe08fffff]
[    0.179356] pci 0000:00:1c.2:   bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[    0.179367] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.179375] pci 0000:00:1c.3:   bridge window [mem 0xe1800000-0xe18fffff]
[    0.179388] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.179390] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.179392] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.179394] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.179395] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[    0.179397] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[    0.179399] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.179401] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.179403] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.179405] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.179406] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.179408] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.179410] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.179412] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[    0.179413] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.179415] pci_bus 0000:00: resource 19 [mem 0x82a00000-0xefffffff window]
[    0.179417] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[    0.179419] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.179421] pci_bus 0000:03: resource 1 [mem 0xe0000000-0xe08fffff]
[    0.179423] pci_bus 0000:03: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref]
[    0.179425] pci_bus 0000:04: resource 1 [mem 0xe1800000-0xe18fffff]
[    0.179458] NET: Registered protocol family 2
[    0.179644] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.179891] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.180025] TCP: Hash tables configured (established 131072 bind 65536)
[    0.180066] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.180125] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.180222] NET: Registered protocol family 1
[    0.180240] pci 0000:00:02.0: Video device with shadowed ROM
[    0.180758] PCI: CLS 64 bytes, default 64
[    0.180813] Trying to unpack rootfs image as initramfs...
[    0.834576] Freeing initrd memory: 39372K (ffff88003330a000 - ffff88003597d000)
[    0.834595] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.834600] software IO TLB [mem 0x7bf1a000-0x7ff1a000] (64MB) mapped at [ffff88007bf1a000-ffff88007ff19fff]
[    0.834671] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.834677] hw unit of domain pp0-core 2^-16 Joules
[    0.834681] hw unit of domain package 2^-16 Joules
[    0.834684] hw unit of domain pp1-gpu 2^-16 Joules
[    0.834798] Scanning for low memory corruption every 60 seconds
[    0.835161] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.835190] audit: initializing netlink subsys (disabled)
[    0.835208] audit: type=2000 audit(1485644049.828:1): initialized
[    0.835618] Initialise system trusted keyring
[    0.835732] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.837294] zbud: loaded
[    0.837508] VFS: Disk quotas dquot_6.6.0
[    0.837546] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.837841] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.838090] fuse init (API version 7.23)
[    0.838231] Key type big_key registered
[    0.838253] Allocating IMA MOK and blacklist keyrings.
[    0.838664] Key type asymmetric registered
[    0.838670] Asymmetric key parser 'x509' registered
[    0.838712] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.838755] io scheduler noop registered
[    0.838761] io scheduler deadline registered (default)
[    0.838795] io scheduler cfq registered
[    0.839519] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.839528] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.839552] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.839560] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.839583] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    0.839588] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.839592] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
[    0.839597] pci 0000:03:00.2: Signaling PME through PCIe PME interrupt
[    0.839601] pci 0000:03:00.3: Signaling PME through PCIe PME interrupt
[    0.839605] pci 0000:03:00.4: Signaling PME through PCIe PME interrupt
[    0.839612] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    0.839635] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.839640] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    0.839647] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.839654] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.839669] pciehp 0000:00:1c.2:pcie04: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.839704] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
[    0.839709] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.839746] intel_idle: MWAIT substates: 0x21120
[    0.839748] intel_idle: v0.4.1 model 0x2A
[    0.839749] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.839976] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.839985] ACPI: Power Button [PWRF]
[    0.840440] GHES: HEST is not enabled!
[    0.840560] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.842270] Linux agpgart interface v0.103
[    0.845172] brd: module loaded
[    0.846418] loop: module loaded
[    0.846640] libphy: Fixed MDIO Bus: probed
[    0.846646] tun: Universal TUN/TAP device driver, 1.6
[    0.846650] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.846699] PPP generic driver version 2.4.2
[    0.846766] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.846775] ehci-pci: EHCI PCI platform driver
[    0.846903] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.846912] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.846931] ehci-pci 0000:00:1a.0: debug port 2
[    0.850852] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.850866] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe192e000
[    0.861655] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.861706] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.861711] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.861717] usb usb1: Product: EHCI Host Controller
[    0.861721] usb usb1: Manufacturer: Linux 4.4.0-53-generic ehci_hcd
[    0.861726] usb usb1: SerialNumber: 0000:00:1a.0
[    0.861855] hub 1-0:1.0: USB hub found
[    0.861864] hub 1-0:1.0: 3 ports detected
[    0.862092] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.862100] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.862116] ehci-pci 0000:00:1d.0: debug port 2
[    0.866020] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.866030] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe192f000
[    0.877760] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.877864] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.877870] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.877877] usb usb2: Product: EHCI Host Controller
[    0.877881] usb usb2: Manufacturer: Linux 4.4.0-53-generic ehci_hcd
[    0.877886] usb usb2: SerialNumber: 0000:00:1d.0
[    0.878061] hub 2-0:1.0: USB hub found
[    0.878070] hub 2-0:1.0: 3 ports detected
[    0.878229] ehci-platform: EHCI generic platform driver
[    0.878250] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.878259] ohci-pci: OHCI PCI platform driver
[    0.878276] ohci-platform: OHCI generic platform driver
[    0.878288] uhci_hcd: USB Universal Host Controller Interface driver
[    0.878360] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.605659] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.605678] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.915219] i8042: No controller found
[    1.915235] tsc: Refined TSC clocksource calibration: 2294.787 MHz
[    1.915241] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113f8b171d, max_idle_ns: 440795241185 ns
[    1.915360] mousedev: PS/2 mouse device common for all mice
[    1.915480] rtc_cmos 00:03: RTC can wake from S4
[    1.915612] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.915644] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.915658] i2c /dev entries driver
[    1.915719] device-mapper: uevent: version 1.0.3
[    1.915791] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.915812] Intel P-state driver initializing.
[    1.916126] ledtrig-cpu: registered to indicate activity on CPUs
[    1.917171] NET: Registered protocol family 10
[    1.917745] NET: Registered protocol family 17
[    1.917784] Key type dns_resolver registered
[    1.918328] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
[    1.918358] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29
[    1.918435] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29
[    1.918471] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
[    1.918590] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.919055] registered taskstats version 1
[    1.919118] Loading compiled-in X.509 certificates
[    1.921868] Loaded X.509 cert 'Build time autogenerated kernel key: e9dbd2fef92418dc580496786c7b3d419aa7d17d'
[    1.921891] zswap: loaded using pool lzo/zbud
[    1.923562] Key type trusted registered
[    1.926868] Key type encrypted registered
[    1.926879] AppArmor: AppArmor sha1 policy hashing enabled
[    1.926885] ima: No TPM chip found, activating TPM-bypass!
[    1.926908] evm: HMAC attrs: 0x1
[    1.927304]   Magic number: 1:300:958
[    1.927398] rtc_cmos 00:03: setting system clock to 2017-01-28 22:54:11 UTC (1485644051)
[    1.927460] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.927465] EDD information not available.
[    1.927523] PM: Hibernation image not present or could not be loaded.
[    1.928721] Freeing unused kernel memory: 1480K (ffffffff81f43000 - ffffffff820b5000)
[    1.928728] Write protecting the kernel read-only data: 14336k
[    1.929159] Freeing unused kernel memory: 1800K (ffff88000183e000 - ffff880001a00000)
[    1.929486] Freeing unused kernel memory: 140K (ffff880001ddd000 - ffff880001e00000)
[    1.939045] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.939118] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.939136] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.939156] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.939591] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.939639] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.939881] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.939937] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.939998] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.940049] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.961030] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.968307] pps_core: LinuxPPS API ver. 1 registered
[    1.968316] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.970330] PTP clock support registered
[    1.975833] sdhci: Secure Digital Host Controller Interface driver
[    1.975842] sdhci: Copyright(c) Pierre Ossman
[    1.977516] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.977524] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.977615] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.977920] sdhci-pci 0000:03:00.1: SDHCI controller found [197b:2392] (rev 30)
[    1.978232] sdhci-pci 0000:03:00.1: No vmmc regulator found
[    1.978238] sdhci-pci 0000:03:00.1: No vqmmc regulator found
[    1.981542] [drm] Initialized drm 1.1.0 20060810
[    1.982804] mmc0: SDHCI controller on PCI [0000:03:00.1] using DMA
[    1.982828] sdhci-pci 0000:03:00.2: SDHCI controller found [197b:2391] (rev 30)
[    1.983087] sdhci-pci 0000:03:00.2: Refusing to bind to secondary interface.
[    2.045835] firewire_ohci 0000:03:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10
[    2.046193] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.046199] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.046250] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.046256] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.046477] hub 2-1:1.0: USB hub found
[    2.046531] hub 1-1:1.0: USB hub found
[    2.046551] hub 2-1:1.0: 8 ports detected
[    2.046684] hub 1-1:1.0: 6 ports detected
[    2.240100] e1000e 0000:00:19.0 eth0: registered PHC clock
[    2.240108] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 2c:27:d7:80:52:26
[    2.240114] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    2.240150] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[    2.240187] ahci 0000:00:1f.2: version 3.0
[    2.240400] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    2.240771] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    2.253784] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x21 impl SATA mode
[    2.253801] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    2.254710] scsi host0: ahci
[    2.254928] scsi host1: ahci
[    2.255059] scsi host2: ahci
[    2.255185] scsi host3: ahci
[    2.255309] scsi host4: ahci
[    2.255433] scsi host5: ahci
[    2.255490] ata1: SATA max UDMA/133 abar m2048@0xe192d000 port 0xe192d100 irq 29
[    2.255495] ata2: DUMMY
[    2.255498] ata3: DUMMY
[    2.255501] ata4: DUMMY
[    2.255504] ata5: DUMMY
[    2.255509] ata6: SATA max UDMA/133 abar m2048@0xe192d000 port 0xe192d380 irq 29
[    2.256266] [drm] Memory usable by graphics device = 2048M
[    2.256272] [drm] Replacing VGA console driver
[    2.315565] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.315573] [drm] Driver supports precise vblank timestamp query.
[    2.316369] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.317698] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[    2.317703] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[    2.348880] fbcon: inteldrmfb (fb0) is primary device
[    2.348933] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.411686] usb 1-1.1: New USB device found, idVendor=138a, idProduct=003c
[    2.411693] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    2.411699] usb 1-1.1: SerialNumber: 00b0ea91588a
[    2.413540] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c52b
[    2.413545] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.413549] usb 2-1.3: Product: USB Receiver
[    2.413552] usb 2-1.3: Manufacturer: Logitech
[    2.418967] hidraw: raw HID events driver (C) Jiri Kosina
[    2.425444] usbcore: registered new interface driver usbhid
[    2.425444] usbhid: USB HID core driver
[    2.428254] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input2
[    2.485748] usb 2-1.4: new high-speed USB device number 4 using ehci-pci
[    2.545271] input: Logitech K400 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.2/0003:046D:C52B.0003/0003:046D:4024.0004/input/input1
[    2.545381] logitech-hidpp-device 0003:046D:4024.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400] on usb-0000:00:1d.0-1.3:1
[    2.545737] firewire_core 0000:03:00.0: created device fw0: GUID ffe473fffffffffe, S400
[    2.573817] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.585132] ata1.00: ATA-9: INTEL SSDSC2BW240A3L, LF1i, max UDMA/133
[    2.585133] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.595117] ata1.00: configured for UDMA/133
[    2.595415] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2BW24 LF1i PQ: 0 ANSI: 5
[    2.595738] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    2.595775] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.595822] sd 0:0:0:0: [sda] Write Protect is off
[    2.595824] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.595853] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.596454]  sda: sda1 sda2 sda3 sda4
[    2.596803] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.627547] usb 2-1.4: New USB device found, idVendor=04f2, idProduct=b242
[    2.627552] usb 2-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    2.627555] usb 2-1.4: Product: HP HD Webcam [Fixed]
[    2.627559] usb 2-1.4: Manufacturer: Chicony Electronics Co., Ltd.
[    2.627562] usb 2-1.4: SerialNumber: SN0001
[    2.913768] ata6: SATA link down (SStatus 0 SControl 300)
[    2.913869] clocksource: Switched to clocksource tsc
[    3.004329] Console: switching to colour frame buffer device 160x50
[    3.006841] acpi device:03: registered as cooling_device4
[    3.006900] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[    3.006981] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[    3.019352] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.253638] raid6: sse2x1   gen()  7594 MB/s
[    3.321640] raid6: sse2x1   xor()  5961 MB/s
[    3.389638] raid6: sse2x2   gen()  9583 MB/s
[    3.457634] raid6: sse2x2   xor()  6885 MB/s
[    3.525639] raid6: sse2x4   gen() 11017 MB/s
[    3.593639] raid6: sse2x4   xor()  7942 MB/s
[    3.593640] raid6: using algorithm sse2x4 gen() 11017 MB/s
[    3.593641] raid6: .... xor() 7942 MB/s, rmw enabled
[    3.593643] raid6: using ssse3x2 recovery algorithm
[    3.594801] xor: automatically using best checksumming function:
[    3.633635]    avx       : 18804.000 MB/sec
[    3.648859] Btrfs loaded
[    3.713908] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    3.791008] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    3.791131] systemd[1]: Detected architecture x86-64.
[    3.791994] systemd[1]: Set hostname to <lab1817>.
[    3.861839] systemd[1]: Listening on Journal Socket.
[    3.861948] systemd[1]: Listening on LVM2 poll daemon socket.
[    3.861994] systemd[1]: Reached target Remote File Systems (Pre).
[    3.862047] systemd[1]: Listening on udev Kernel Socket.
[    3.862104] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.862164] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.862222] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.862319] systemd[1]: Created slice User and Session Slice.
[    3.862408] systemd[1]: Listening on Journal Audit Socket.
[    3.862440] systemd[1]: Reached target User and Group Name Lookups.
[    3.862526] systemd[1]: Created slice System Slice.
[    3.877802] systemd[1]: Mounting Debug File System...
[    3.878322] systemd[1]: Mounting POSIX Message Queue File System...
[    3.878933] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    3.879587] systemd[1]: Started Read required files in advance.
[    3.882500] systemd[1]: Starting Load Kernel Modules...
[    3.883104] systemd[1]: Started Braille Device Support.
[    3.884854] systemd[1]: Mounting Huge Pages File System...
[    3.885458] systemd[1]: Starting Uncomplicated firewall...
[    3.885573] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    3.885667] systemd[1]: Listening on LVM2 metadata daemon socket.
[    3.886272] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    3.886379] systemd[1]: Listening on fsck to fsckd communication Socket.
[    3.886583] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.887646] systemd[1]: Reached target Encrypted Volumes.
[    3.887739] systemd[1]: Listening on udev Control Socket.
[    3.887803] systemd[1]: Listening on Syslog Socket.
[    3.888400] systemd[1]: Starting Journal Service...
[    3.888453] systemd[1]: Reached target Remote File Systems.
[    3.888512] systemd[1]: Reached target Slices.
[    3.889018] systemd[1]: Starting Set console keymap...
[    3.894179] systemd[1]: Mounted POSIX Message Queue File System.
[    3.894294] systemd[1]: Mounted Huge Pages File System.
[    3.894351] systemd[1]: Mounted Debug File System.
[    3.894648] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    3.894901] systemd[1]: Started Uncomplicated firewall.
[    3.897657] lp: driver loaded but no devices found
[    3.909663] ppdev: user-space parallel port driver
[    3.914439] systemd[1]: Started Load Kernel Modules.
[    3.953861] systemd[1]: Started LVM2 metadata daemon.
[    3.954632] systemd[1]: Starting Apply Kernel Variables...
[    3.955328] systemd[1]: Mounting FUSE Control File System...
[    3.956112] systemd[1]: Starting Create Static Device Nodes in /dev...
[    3.956858] systemd[1]: Started Journal Service.
[    4.005974] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[    4.026479] systemd-journald[338]: Received request to flush runtime journal from PID 1
[    4.127997] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.241294] ath: phy0: ASPM enabled: 0x43
[    4.241299] ath: EEPROM regdomain: 0x6a
[    4.241300] ath: EEPROM indicates we should expect a direct regpair map
[    4.241303] ath: Country alpha2 being used: 00
[    4.241304] ath: Regpair used: 0x6a
[    4.247433] AVX version of gcm_enc/dec engaged.
[    4.247437] AES CTR mode by8 optimization enabled
[    4.251060] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    4.251557] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffc90001d00000, irq=19
[    4.285612] intel_rapl: Found RAPL domain package
[    4.285617] intel_rapl: Found RAPL domain core
[    4.285619] intel_rapl: Found RAPL domain uncore
[    4.298854] media: Linux media interface: v0.10
[    4.311318] Linux video capture interface: v2.00
[    4.317030] Adding 8191996k swap on /dev/sda3.  Priority:-1 extents:1 across:8191996k SSFS
[    4.324003] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (04f2:b242)
[    4.371190] ath9k 0000:04:00.0 wlp4s0: renamed from wlan0
[    4.400981] cfg80211: World regulatory domain updated:
[    4.400987] cfg80211:  DFS Master region: unset
[    4.400988] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    4.400992] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    4.400995] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    4.400997] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    4.401000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    4.401003] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    4.401005] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    4.401007] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    4.401010] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    4.450111] audit: type=1400 audit(1485644054.018:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=802 comm="apparmor_parser"
[    4.450122] audit: type=1400 audit(1485644054.018:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=802 comm="apparmor_parser"
[    4.450130] audit: type=1400 audit(1485644054.018:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=802 comm="apparmor_parser"
[    4.450137] audit: type=1400 audit(1485644054.018:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=802 comm="apparmor_parser"
[    4.451183] audit: type=1400 audit(1485644054.018:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=801 comm="apparmor_parser"
[    4.451192] audit: type=1400 audit(1485644054.018:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=801 comm="apparmor_parser"
[    4.451199] audit: type=1400 audit(1485644054.018:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=801 comm="apparmor_parser"
[    4.451205] audit: type=1400 audit(1485644054.018:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=801 comm="apparmor_parser"
[    4.452116] audit: type=1400 audit(1485644054.018:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=805 comm="apparmor_parser"
[    4.508247] cgroup: new mount options do not match the existing superblock, will be ignored
[    4.538824] input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input3
[    4.538909] usbcore: registered new interface driver uvcvideo
[    4.538911] USB Video Class driver (1.1.1)
[    5.171881] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[    5.179393] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[    5.182762] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    5.441887] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    5.531921] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[    6.133725] mei_me 0000:00:16.0: wait hw ready failed
[    6.133741] mei_me 0000:00:16.0: hw_start failed ret = -62
[    6.133779] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[    8.133716] mei_me 0000:00:16.0: wait hw ready failed
[    8.133731] mei_me 0000:00:16.0: hw_start failed ret = -62
[    8.133769] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[   10.133717] mei_me 0000:00:16.0: wait hw ready failed
[   10.133734] mei_me 0000:00:16.0: hw_start failed ret = -62
[   10.133749] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
[   10.133751] mei_me 0000:00:16.0: reset failed ret = -19
[   10.133753] mei_me 0000:00:16.0: link layer initialization failed.
[   10.133756] mei_me 0000:00:16.0: init hw failure.
[   10.133957] mei_me 0000:00:16.0: initialization failed.
[   10.134089] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20150930/utaddress-254)
[   10.134096] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.134101] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20150930/utaddress-254)
[   10.134106] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.134108] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20150930/utaddress-254)
[   10.134112] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.134114] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20150930/utaddress-254)
[   10.134118] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.134120] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.150642] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
[   10.150647] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[   10.150649] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[   10.150651] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[   10.150652] snd_hda_codec_idt hdaudioC0D0:    inputs:
[   10.150654] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0xe
[   10.150656] snd_hda_codec_idt hdaudioC0D0:      Mic=0xc
[   10.150657] snd_hda_codec_idt hdaudioC0D0:      Line=0xf
[   10.187141] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[   10.187214] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   10.187279] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   10.187344] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   10.187407] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   12.442715] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[   12.448354] vboxdrv: Found 4 processor cores
[   12.466370] vboxdrv: TSC mode is Invariant, tentative frequency 2294770873 Hz
[   12.466371] vboxdrv: Successfully loaded version 5.0.24_Ubuntu (interface 0x00240000)
[   12.471223] VBoxNetFlt: Successfully started.
[   12.478069] VBoxNetAdp: Successfully started.
[   12.483372] VBoxPciLinuxInit
[   12.488785] vboxpci: IOMMU not found (not registered)
[   13.901152] random: nonblocking pool is initialized
[   13.921084] logitech-hidpp-device 0003:046D:4024.0004: HID++ 2.0 device connected.
[   15.593817] wlp4s0: authenticate with ec:26:ca:c0:9f:50
[   15.605083] wlp4s0: send auth to ec:26:ca:c0:9f:50 (try 1/3)
[   15.608191] wlp4s0: authenticated
[   15.613605] wlp4s0: associate with ec:26:ca:c0:9f:50 (try 1/3)
[   15.620062] wlp4s0: RX AssocResp from ec:26:ca:c0:9f:50 (capab=0x431 status=0 aid=5)
[   15.620174] wlp4s0: associated
[   15.620222] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[   15.622932] ath: EEPROM regdomain: 0x809c
[   15.622935] ath: EEPROM indicates we should expect a country code
[   15.622936] ath: doing EEPROM country->regdmn map search
[   15.622937] ath: country maps to regdmn code: 0x52
[   15.622939] ath: Country alpha2 being used: CN
[   15.622940] ath: Regpair used: 0x52
[   15.622941] ath: regdomain 0x809c dynamically updated by country IE
[   15.622969] cfg80211: Regulatory domain changed to country: CN
[   15.622970] cfg80211:  DFS Master region: FCC
[   15.622971] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   15.622974] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   15.622976] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
[   15.622978] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[   15.622979] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[   15.622981] cfg80211:   (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[   15.622982] cfg80211:   (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
[   15.622983] cfg80211:   (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[   53.289485] usb 2-1.1: new full-speed USB device number 5 using ehci-pci
[   53.384318] usb 2-1.1: New USB device found, idVendor=1050, idProduct=0405
[   53.384330] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   53.384336] usb 2-1.1: Product: Yubikey 4 OTP+CCID
[   53.384340] usb 2-1.1: Manufacturer: Yubico
[   53.409343] input: Yubico Yubikey 4 OTP+CCID as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:1050:0405.0005/input/input9
[   53.465893] hid-generic 0003:1050:0405.0005: input,hidraw2: USB HID v1.10 Keyboard [Yubico Yubikey 4 OTP+CCID] on usb-0000:00:1d.0-1.1/input0