[    0.263567] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.309594] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.309811] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[    0.309972] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
[    0.310420] PCI host bridge to bus 0000:00
[    0.310531] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.310595] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.310646] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.310696] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.310747] pci_bus 0000:00: root bus resource [mem 0x7f000000-0xffffffff]
[    0.310817] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[    0.311382] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
[    0.311406] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[    0.311416] pci 0000:00:01.0: reg 0x14: [io  0x2000-0x20ff]
[    0.311426] pci 0000:00:01.0: reg 0x18: [mem 0xf0200000-0xf023ffff]
[    0.311495] pci 0000:00:01.0: supports D1 D2
[    0.311624] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.312220] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
[    0.312314] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.312448] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.313000] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.313035] pci 0000:00:11.0: reg 0x10: [io  0x2410-0x2417]
[    0.313048] pci 0000:00:11.0: reg 0x14: [io  0x2420-0x2423]
[    0.313061] pci 0000:00:11.0: reg 0x18: [io  0x2418-0x241f]
[    0.313074] pci 0000:00:11.0: reg 0x1c: [io  0x2424-0x2427]
[    0.313086] pci 0000:00:11.0: reg 0x20: [io  0x2400-0x240f]
[    0.313099] pci 0000:00:11.0: reg 0x24: [mem 0xf0246000-0xf02463ff]
[    0.313748] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.313777] pci 0000:00:12.0: reg 0x10: [mem 0xf0244000-0xf0244fff]
[    0.313975] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.314522] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.314558] pci 0000:00:12.2: reg 0x10: [mem 0xf0246400-0xf02464ff]
[    0.314665] pci 0000:00:12.2: supports D1 D2
[    0.314669] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.314795] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.315327] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.315355] pci 0000:00:13.0: reg 0x10: [mem 0xf0245000-0xf0245fff]
[    0.315545] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.316061] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.316095] pci 0000:00:13.2: reg 0x10: [mem 0xf0246500-0xf02465ff]
[    0.316201] pci 0000:00:13.2: supports D1 D2
[    0.316205] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.316332] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.316852] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.317475] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.317511] pci 0000:00:14.2: reg 0x10: [mem 0xf0240000-0xf0243fff 64bit]
[    0.317599] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.318169] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.318700] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.318878] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.319237] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[    0.319579] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[    0.319929] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[    0.320201] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[    0.320505] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[    0.320817] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[    0.321176] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[    0.321532] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[    0.322089] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.322112] pci 0000:01:00.0: reg 0x10: [io  0x1000-0x10ff]
[    0.322143] pci 0000:01:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[    0.322163] pci 0000:01:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.322178] pci 0000:01:00.0: reg 0x30: [mem 0xf0100000-0xf011ffff pref]
[    0.322248] pci 0000:01:00.0: supports D1 D2
[    0.322252] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.336942] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.337054] pci 0000:00:04.0:   bridge window [io  0x1000-0x1fff]
[    0.337060] pci 0000:00:04.0:   bridge window [mem 0xf0100000-0xf01fffff]
[    0.337068] pci 0000:00:04.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.337589] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[    0.337661] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.337665] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.337669] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.337673] pci 0000:00:14.4:   bridge window [mem 0x7f000000-0xffffffff] (subtractive decode)
[    0.337699] pci_bus 0000:00: on NUMA node 0
[    0.338213] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.338802] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.339385] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.339967] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.340547] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.341127] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled.
[    0.341465] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.342044] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.343187] ACPI: Enabled 6 GPEs in block 00 to 1F
[    0.343331] ACPI: \_SB_.PCI0: notify handler is installed
[    0.343390] Found 1 acpi root devices
[    0.344616] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.344730] vgaarb: loaded
[    0.344775] vgaarb: bridge control possible 0000:00:01.0
[    0.345340] SCSI subsystem initialized
[    0.346189] PCI: Using ACPI for IRQ routing
[    0.346292] PCI: pci_cache_line_size set to 64 bytes
[    0.346364] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.346368] e820: reserve RAM buffer [mem 0x66150000-0x67ffffff]
[    0.347189] Switched to clocksource hpet
[    0.365715] pnp: PnP ACPI init
[    0.365804] ACPI: bus type PNP registered
[    0.366466] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.366851] pnp 00:01: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.366913] pnp 00:02: [dma 4]
[    0.367179] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.367517] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.367867] pnp: PnP ACPI: found 4 devices
[    0.367920] ACPI: bus type PNP unregistered
[    0.373078] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.373136] pci 0000:00:04.0:   bridge window [io  0x1000-0x1fff]
[    0.373190] pci 0000:00:04.0:   bridge window [mem 0xf0100000-0xf01fffff]
[    0.373243] pci 0000:00:04.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.373300] pci 0000:00:14.4: PCI bridge to [bus 02]
[    0.373363] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.373367] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.373371] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.373374] pci_bus 0000:00: resource 7 [mem 0x7f000000-0xffffffff]
[    0.373379] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.373382] pci_bus 0000:01: resource 1 [mem 0xf0100000-0xf01fffff]
[    0.373386] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.373391] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
[    0.373395] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
[    0.373398] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[    0.373402] pci_bus 0000:02: resource 7 [mem 0x7f000000-0xffffffff]
[    0.373533] NET: Registered protocol family 2
[    0.373986] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[    0.374159] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.374359] TCP: Hash tables configured (established 16384 bind 16384)
[    0.374522] TCP: reno registered
[    0.374590] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.374663] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.375036] NET: Registered protocol family 1
[    0.375121] pci 0000:00:01.0: Boot video device
[    0.376574] PCI: CLS 64 bytes, default 64
[    0.376672] Trying to unpack rootfs image as initramfs...
[    1.175610] Freeing initrd memory: 3404K (ffff880037c9d000 - ffff880037ff0000)
[    1.175998] LVT offset 0 assigned for vector 0x400
[    1.176130] perf: AMD IBS detected (0x000000ff)
[    1.178733] audit: initializing netlink socket (disabled)
[    1.178810] type=2000 audit(1397759970.070:1): initialized
[    1.180610] VFS: Disk quotas dquot_6.5.2
[    1.180756] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.181170] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.181264] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    1.181950] OCFS2 1.5.0
[    1.182230] ocfs2: Registered cluster interface o2cb
[    1.182297] OCFS2 DLMFS 1.5.0
[    1.182447] OCFS2 User DLM kernel interface loaded
[    1.182499] OCFS2 Node Manager 1.5.0
[    1.183001] OCFS2 DLM 1.5.0
[    1.183947] GFS2 installed
[    1.186840] msgmni has been set to 3195
[    1.188639] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.188700] io scheduler noop registered
[    1.188745] io scheduler deadline registered
[    1.188818] io scheduler cfq registered (default)
[    1.189176] pcieport 0000:00:04.0: device [1022:1512] has invalid IRQ; check vendor BIOS
[    1.189520] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[    1.190348] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
[    1.190423] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    1.190477] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
[    1.191039] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.212055] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.233016] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.253991] serial8250: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[    1.275234] serial8250: ttyS3 at I/O 0x2e8 (irq = 3, base_baud = 115200) is a 16550A
[    1.276116] Linux agpgart interface v0.103
[    1.285950] brd: module loaded
[    1.290305] loop: module loaded
[    1.291436] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.292139] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.292205] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.292651] mousedev: PS/2 mouse device common for all mice
[    1.293314] hidraw: raw HID events driver (C) Jiri Kosina
[    1.294815] TCP: cubic registered
[    1.294886] NET: Registered protocol family 17
[    1.296380] registered taskstats version 1
[    1.297054] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.298007] Freeing unused kernel memory: 800K (ffffffff8167d000 - ffffffff81745000)
[    1.479888] libata version 3.00 loaded.
[    1.882655] ahci 0000:00:11.0: version 3.0
[    1.883110] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    1.883118] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part 
[    1.890679] scsi0 : ahci
[    1.891412] scsi1 : ahci
[    1.892085] scsi2 : ahci
[    1.892619] scsi3 : ahci
[    1.893061] scsi4 : ahci
[    1.893504] scsi5 : ahci
[    1.893880] ata1: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246100 irq 19
[    1.893886] ata2: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246180 irq 19
[    1.893890] ata3: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246200 irq 19
[    1.893894] ata4: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246280 irq 19
[    1.893899] ata5: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246300 irq 19
[    1.893903] ata6: SATA max UDMA/133 abar m1024@0xf0246000 port 0xf0246380 irq 19
[    2.167466] tsc: Refined TSC clocksource calibration: 1600.000 MHz
[    2.227335] ata3: SATA link down (SStatus 0 SControl 300)
[    2.227462] ata4: SATA link down (SStatus 0 SControl 300)
[    2.237485] ata5: SATA link down (SStatus 0 SControl 300)
[    2.237552] ata6: SATA link down (SStatus 0 SControl 300)
[    2.427340] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.427443] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.427952] ata2.00: ATA-7: Kingston SSDNow V Series 64GB, B090522a, max UDMA/133
[    2.427960] ata2.00: 125045424 sectors, multi 1: LBA 
[    2.428943] ata2.00: configured for UDMA/133
[    2.431260] ata1.00: ATAPI: hp      DVDRAM GT30L, mP06, max UDMA/100
[    2.435026] ata1.00: configured for UDMA/100
[    2.438389] scsi 0:0:0:0: CD-ROM            hp       DVDRAM GT30L     mP06 PQ: 0 ANSI: 5
[    2.444227] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.444238] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.445378] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    2.446317] scsi 1:0:0:0: Direct-Access     ATA      Kingston SSDNow  B090 PQ: 0 ANSI: 5
[    2.447780] sd 1:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[    2.447914] sd 1:0:0:0: [sda] Write Protect is off
[    2.447920] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.447995] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.450630]  sda: sda1
[    2.452139] sd 1:0:0:0: [sda] Attached SCSI disk
[    2.510536] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    2.510878] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    2.672606] scsi: <fdomain> Detection failed (no card)
[    2.702967] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    2.911321] imm: Version 2.05 (for Linux 2.4.0)
[    3.012274] Fusion MPT base driver 3.04.20
[    3.012279] Copyright (c) 1999-2008 LSI Corporation
[    3.025547] Fusion MPT SPI Host driver 3.04.20
[    3.036454] Fusion MPT FC Host driver 3.04.20
[    3.047354] Fusion MPT SAS Host driver 3.04.20
[    3.054132] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    3.060703] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    3.067454] Compaq SMART2 Driver (v 2.6.0)
[    3.123606] HP CISS Driver (v 3.6.26)
[    3.159680] Adaptec aacraid driver 1.2-0[30200]-ms
[    3.167454] Switched to clocksource tsc
[    3.172120] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    3.173571] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    3.185364] megasas: 06.700.06.00-rc1 Sat. Aug. 31 17:00:00 PDT 2013
[    3.196472] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.08-k.
[    3.230952] Emulex LightPulse Fibre Channel SCSI driver 8.3.42
[    3.230957] Copyright(c) 2004-2013 Emulex.  All rights reserved.
[    3.245428] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    3.274514] ACPI: bus type USB registered
[    3.275265] usbcore: registered new interface driver usbfs
[    3.275471] usbcore: registered new interface driver hub
[    3.276154] usbcore: registered new device driver usb
[    3.277634] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.278353] ehci-pci: EHCI PCI platform driver
[    3.278771] ehci-pci 0000:00:12.2: EHCI Host Controller
[    3.278787] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    3.278801] QUIRK: Enable AMD PLL fix
[    3.278805] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    3.278835] ehci-pci 0000:00:12.2: debug port 1
[    3.278904] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0246400
[    3.297384] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    3.297769] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.297783] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.297790] usb usb1: Product: EHCI Host Controller
[    3.297797] usb usb1: Manufacturer: Linux 3.12.13-gentoo ehci_hcd
[    3.297803] usb usb1: SerialNumber: 0000:00:12.2
[    3.298558] hub 1-0:1.0: USB hub found
[    3.298577] hub 1-0:1.0: 5 ports detected
[    3.299437] ehci-pci 0000:00:13.2: EHCI Host Controller
[    3.299453] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    3.299463] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    3.299493] ehci-pci 0000:00:13.2: debug port 1
[    3.299541] ehci-pci 0000:00:13.2: irq 17, io mem 0xf0246500
[    3.317420] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    3.317554] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    3.317558] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.317562] usb usb2: Product: EHCI Host Controller
[    3.317566] usb usb2: Manufacturer: Linux 3.12.13-gentoo ehci_hcd
[    3.317569] usb usb2: SerialNumber: 0000:00:13.2
[    3.318587] hub 2-0:1.0: USB hub found
[    3.318622] hub 2-0:1.0: 5 ports detected
[    3.372551] usbcore: registered new interface driver usb-storage
[    3.378322] uhci_hcd: USB Universal Host Controller Interface driver
[    3.384952] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.413130] usbcore: registered new interface driver usbhid
[    3.413135] usbhid: USB HID core driver
[    3.705051] device-mapper: uevent: version 1.0.3
[    3.705605] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
[    3.778606] md: raid0 personality registered for level 0
[    3.785202] md: raid1 personality registered for level 1
[    3.957233] raid6: sse2x1    1320 MB/s
[    4.127256] raid6: sse2x2    1578 MB/s
[    4.297242] raid6: sse2x4    2256 MB/s
[    4.297245] raid6: using algorithm sse2x4 (2256 MB/s)
[    4.297247] raid6: using ssse3x2 recovery algorithm
[    4.298425] async_tx: api initialized (async)
[    4.299526] xor: measuring software checksum speed
[    4.397188]    prefetch64-sse:  3455.600 MB/sec
[    4.497184]    generic_sse:  3225.600 MB/sec
[    4.497186] xor: using function: prefetch64-sse (3455.600 MB/sec)
[    4.502381] md: raid6 personality registered for level 6
[    4.502386] md: raid5 personality registered for level 5
[    4.502388] md: raid4 personality registered for level 4
[    4.540253] md: raid10 personality registered for level 10
[    4.546245] md: linear personality registered for level -1
[    4.552960] md: multipath personality registered for level -4
[    4.633322] JFS: nTxBlock = 8192, nTxLock = 65536
[    4.652287] RPC: Registered named UNIX socket transport module.
[    4.652292] RPC: Registered udp transport module.
[    4.652294] RPC: Registered tcp transport module.
[    4.652296] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    4.696719] fuse init (API version 7.22)
[    4.706929] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    4.706935] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    4.716371] pps_core: LinuxPPS API ver. 1 registered
[    4.716377] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    4.717812] PTP clock support registered
[    4.731334] Loading iSCSI transport class v2.0-870.
[    4.866959] kjournald starting.  Commit interval 5 seconds
[    4.867037] EXT3-fs (sda1): mounted filesystem with ordered data mode
[    5.688226] systemd-udevd[2243]: starting version 208
[    5.814822] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[    5.814988] ACPI: Power Button [PWRB]
[    5.815145] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    5.815221] ACPI: Power Button [PWRF]
[    5.817896] ACPI: acpi_idle registered with cpuidle
[    5.821760] ohci-pci: OHCI PCI platform driver
[    5.822147] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    5.822163] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    5.822224] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0244000
[    5.828487] acpi-cpufreq: overriding BIOS provided _PSD data
[    5.843135] [drm] Initialized drm 1.1.0 20060810
[    5.843835] rtc_cmos 00:00: RTC can wake from S4
[    5.845338] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    5.845396] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[    5.853292] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    5.853719] r8169 0000:01:00.0: irq 41 for MSI/MSI-X
[    5.854233] r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xffffc90001038000, 00:03:2d:18:60:ab, XID 081000c0 IRQ 41
[    5.854239] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    5.881819] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    5.881828] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.881832] usb usb3: Product: OHCI PCI host controller
[    5.881836] usb usb3: Manufacturer: Linux 3.12.13-gentoo ohci_hcd
[    5.881839] usb usb3: SerialNumber: 0000:00:12.0
[    5.882592] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    5.882608] hub 3-0:1.0: USB hub found
[    5.882631] hub 3-0:1.0: 5 ports detected
[    5.883416] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    5.883432] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[    5.883471] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0245000
[    5.914559] kvm: Nested Virtualization enabled
[    5.914566] kvm: Nested Paging enabled
[    5.919086] [drm] radeon kernel modesetting enabled.
[    5.950201] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    5.950209] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.950213] usb usb4: Product: OHCI PCI host controller
[    5.950217] usb usb4: Manufacturer: Linux 3.12.13-gentoo ohci_hcd
[    5.950220] usb usb4: SerialNumber: 0000:00:13.0
[    5.950948] hub 4-0:1.0: USB hub found
[    5.950983] hub 4-0:1.0: 5 ports detected
[    5.951367] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SMB0 1 (20130725/utaddress-251)
[    5.951379] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.952324] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802).
[    5.952369] [drm] register mmio base: 0xF0200000
[    5.952371] [drm] register mmio size: 262144
[    5.952450] ATOM BIOS: AMD
[    5.952515] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[    5.952519] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
[    5.952522] [drm] Detected VRAM RAM=384M, BAR=256M
[    5.952524] [drm] RAM width 32bits DDR
[    5.952624] [TTM] Zone  kernel: Available graphics memory: 818320 kiB
[    5.952626] [TTM] Initializing pool allocator
[    5.952635] [TTM] Initializing DMA pool allocator
[    5.952679] [drm] radeon: 384M of VRAM memory ready
[    5.952715] [drm] radeon: 1024M of GTT memory ready.
[    5.983996] radeon 0000:00:01.0: radeon_uvd: Can't load firmware "radeon/SUMO_uvd.bin"
[    5.984012] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    6.002161] [drm] Loading PALM Microcode
[    6.003342] r600_cp: Failed to load firmware "radeon/PALM_pfp.bin"
[    6.003351] [drm:evergreen_startup] *ERROR* Failed to load firmware!
[    6.003357] radeon 0000:00:01.0: disabling GPU acceleration
[    6.004391] radeon 0000:00:01.0: ffff88005fe63800 unpin not necessary
[    6.005458] [drm] Radeon Display Connectors
[    6.005460] [drm] Connector 0:
[    6.005462] [drm]   DP-1
[    6.005464] [drm]   HPD2
[    6.005467] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[    6.005468] [drm]   Encoders:
[    6.005470] [drm]     DFP1: INTERNAL_UNIPHY
[    6.005472] [drm] Connector 1:
[    6.005473] [drm]   VGA-1
[    6.005476] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[    6.005477] [drm]   Encoders:
[    6.005479] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    6.005515] [drm] Internal thermal controller without fan control
[    6.005576] [drm] radeon: power management initialized
[    6.015296] systemd-udevd[2267]: renamed network interface eth0 to enp1s0
[    6.067821] [drm] fb mappable at 0xE0241000
[    6.067825] [drm] vram apper at 0xE0000000
[    6.067827] [drm] size 7680000
[    6.067828] [drm] fb depth is 24
[    6.067830] [drm]    pitch is 6400
[    6.068103] fbcon: radeondrmfb (fb0) is primary device
[    6.138078] Console: switching to colour frame buffer device 200x75
[    6.151963] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[    6.151967] radeon 0000:00:01.0: registered panic notifier
[    6.152000] [drm] Initialized radeon 2.34.0 20080528 for 0000:00:01.0 on minor 0
[    6.777787] EXT3-fs (sda1): using internal journal
[    8.181862] r8169 0000:01:00.0 enp1s0: unable to load firmware patch rtl_nic/rtl8168d-1.fw (-2)
[    8.208753] r8169 0000:01:00.0 enp1s0: link down
[    8.208905] r8169 0000:01:00.0 enp1s0: link down
[    9.478080] NET: Registered protocol family 10
[    9.478508] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[   10.544865] r8169 0000:01:00.0 enp1s0: link up
[   10.544887] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready