[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13-0.bpo.1-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.13.7-1~bpo70+1 (2014-03-29)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007debcfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007debd000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fecc0000-0x00000000fecc0fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS M2V-MX SE/M2V-MX SE, BIOS 4.0-5801-g3bc6eb5 04/19/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7debd max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 base 007E000000 mask FFFE000000 uncachable
[    0.000000]   2 base 00D0000000 mask FFF0000000 write-combining
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37600000-0x377fffff]
[    0.000000]  [mem 0x37600000-0x377fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x34000000-0x375fffff]
[    0.000000]  [mem 0x34000000-0x375fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x33ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37800000-0x379fdfff]
[    0.000000]  [mem 0x37800000-0x379fdfff] page 4k
[    0.000000] BRK [0x01706000, 0x01706fff] PGTABLE
[    0.000000] BRK [0x01707000, 0x01708fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x365d0000-0x372dffff]
[    0.000000] ACPI: RSDP 000f2720 000014 (v00 CORE  )
[    0.000000] ACPI: RSDT 7dee0424 000040 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 7dee0efd 0000F4 (v04 CORE   COREBOOT 00000000 CORE 0000002A)
[    0.000000] ACPI: DSDT 7dee0540 0009BD (v01 CORE   COREBOOT 00000001 INTL 20100528)
[    0.000000] ACPI: FACS 7dee0500 000040
[    0.000000] ACPI: HPET 7dee0ff1 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 7dee1029 000066 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: MCFG 7dee108f 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 7dee10cb 000090 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 7dee115b 00002D (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SSDT 7dee1188 00027F (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1124MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] BRK [0x01709000, 0x01709fff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x379fdfff]
[    0.000000]   HighMem  [mem 0x379fe000-0x7debcfff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x7debcfff]
[    0.000000] On node 0 totalpages: 515675
[    0.000000] free_area_init_node: node 0, pgdat c15cd600, node_mem_map f5610020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1748 pages used for memmap
[    0.000000]   Normal zone: 223742 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2250 pages used for memmap
[    0.000000]   HighMem zone: 287935 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x11068201 base: 0xfed00000
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 64
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f79e4000 s35328 r0 d22016 u57344
[    0.000000] pcpu-alloc: s35328 r0 d22016 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 513895
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13-0.bpo.1-686-pae root=/dev/mapper/sda2crypt ro quiet noisapnp pcie_aspm=force pcie_aspm.policy=powersave nmi_watchdog=0 console=ttyS0,115200n8 console=tty1
[    0.000000] PCIe ASPM is forcibly enabled
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:0007debd)
[    0.000000] Memory: 2025020K/2062700K available (4322K kernel code, 374K rwdata, 1284K rodata, 536K init, 584K bss, 37680K reserved, 1151740K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd35000 - 0xfffff000   (2856 kB)
[    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
[    0.000000]     vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
[    0.000000]       .init : 0xc15da000 - 0xc1660000   ( 536 kB)
[    0.000000]       .data : 0xc1438ed7 - 0xc15d9b40   (1667 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1438ed7   (4323 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f7406000 soft=f7408000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty1] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1799.958 MHz processor
[    0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.91 BogoMIPS (lpj=7199832)
[    0.004006] pid_max: default: 32768 minimum: 301
[    0.004038] Security Framework initialized
[    0.004045] AppArmor: AppArmor disabled by boot time parameter
[    0.004047] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.004063] Mount-cache hash table entries: 512
[    0.004293] Initializing cgroup subsys memory
[    0.004302] Initializing cgroup subsys devices
[    0.004305] Initializing cgroup subsys freezer
[    0.004307] Initializing cgroup subsys blkio
[    0.004310] Initializing cgroup subsys perf_event
[    0.004336] mce: CPU supports 5 MCE banks
[    0.004346] LVT offset 0 assigned for vector 0xf9
[    0.004350] process: using AMD E400 aware idle routine
[    0.004361] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.004361] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.004361] tlb_flushall_shift: 4
[    0.010404] Freeing SMP alternatives memory: 20K (c1660000 - c1665000)
[    0.011263] ACPI: Core revision 20131115
[    0.011616] ACPI: All ACPI Tables successfully acquired
[    0.011712] Enabling APIC mode:  Flat.  Using 2 I/O APICs
[    0.012000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.048635] smpboot: CPU0: AMD Sempron(tm) Processor 3200+ (fam: 0f, model: 4f, stepping: 02)
[    0.052000] Performance Events: AMD PMU driver.
[    0.052000] ... version:                0
[    0.052000] ... bit width:              48
[    0.052000] ... generic registers:      4
[    0.052000] ... value mask:             0000ffffffffffff
[    0.052000] ... max period:             00007fffffffffff
[    0.052000] ... fixed-purpose events:   0
[    0.052000] ... event mask:             000000000000000f
[    0.052000] x86: Booted up 1 node, 1 CPUs
[    0.052000] smpboot: Total of 1 processors activated (3599.91 BogoMIPS)
[    0.052000] devtmpfs: initialized
[    0.052000] NET: Registered protocol family 16
[    0.052000] cpuidle: using governor ladder
[    0.052000] cpuidle: using governor menu
[    0.052000] node 0 link 0: io port [1000, 1fff]
[    0.052000] TOM: 0000000080000000 aka 2048M
[    0.052000] node 0 link 0: mmio [a0000, bffff]
[    0.052000] node 0 link 0: mmio [e0000000, f12fffff]
[    0.052000] node 0 link 0: mmio [c0000000, dfffffff]
[    0.052000] bus: [bus 00-05] on node 0 link 0
[    0.052000] bus: 00 [io  0x0000-0xffff]
[    0.052000] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.052000] bus: 00 [mem 0x80000000-0xfcffffffff]
[    0.052000] ACPI FADT declares the system doesn't support MSI, so disable it
[    0.052000] ACPI: bus type PCI registered
[    0.052000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.052000] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.052000] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.052000] PCI: Using MMCONFIG for extended config space
[    0.052000] PCI: Using configuration type 1 for base access
[    0.052000] bio: create slab <bio-0> at 0
[    0.052000] ACPI: Added _OSI(Module Device)
[    0.052000] ACPI: Added _OSI(Processor Device)
[    0.052000] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.052000] ACPI: Added _OSI(Processor Aggregator Device)
[    0.052000] ACPI: Interpreter enabled
[    0.052000] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.052000] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.052000] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20131115/hwxface-580)
[    0.052000] ACPI: (supports S0 S3 S5)
[    0.052000] ACPI: Using IOAPIC for interrupt routing
[    0.052000] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.052000] ACPI: No dock devices found.
[    0.053397] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[    0.053406] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments]
[    0.053414] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.055657] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.055742] PCI host bridge to bus 0000:00
[    0.055747] pci_bus 0000:00: root bus resource [bus 00-05]
[    0.055750] pci_bus 0000:00: root bus resource [io  0x0d00-0x1fff]
[    0.055754] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[    0.055757] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf12fffff]
[    0.055760] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.055763] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.055788] pci 0000:00:00.0: [1106:0336] type 00 class 0x060000
[    0.055803] pci 0000:00:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[    0.055946] pci 0000:00:00.1: [1106:1336] type 00 class 0x060000
[    0.056076] pci 0000:00:00.2: [1106:2336] type 00 class 0x060000
[    0.056164] pci 0000:00:00.3: [1106:3336] type 00 class 0x060000
[    0.056251] pci 0000:00:00.4: [1106:4336] type 00 class 0x060000
[    0.056337] pci 0000:00:00.5: [1106:5336] type 00 class 0x080020
[    0.056447] pci 0000:00:00.6: [1106:6290] type 00 class 0x060000
[    0.056535] pci 0000:00:00.7: [1106:7336] type 00 class 0x060000
[    0.056633] pci 0000:00:01.0: [1106:b188] type 01 class 0x060400
[    0.056736] pci 0000:00:02.0: [1106:a238] type 01 class 0x060400
[    0.056816] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.056893] pci 0000:00:03.0: [1106:c238] type 01 class 0x060400
[    0.056971] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.057059] pci 0000:00:0f.0: [1106:5372] type 00 class 0x01018f
[    0.057079] pci 0000:00:0f.0: reg 0x10: [io  0x18a0-0x18a7]
[    0.057089] pci 0000:00:0f.0: reg 0x14: [io  0x18b0-0x18b3]
[    0.057100] pci 0000:00:0f.0: reg 0x18: [io  0x18a8-0x18af]
[    0.057111] pci 0000:00:0f.0: reg 0x1c: [io  0x18b4-0x18b7]
[    0.057121] pci 0000:00:0f.0: reg 0x20: [io  0x1880-0x188f]
[    0.057132] pci 0000:00:0f.0: reg 0x24: [io  0x1000-0x10ff]
[    0.057221] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a
[    0.057267] pci 0000:00:0f.1: reg 0x20: [io  0x1890-0x189f]
[    0.057371] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
[    0.057416] pci 0000:00:10.0: reg 0x20: [io  0x1800-0x181f]
[    0.057457] pci 0000:00:10.0: supports D1 D2
[    0.057460] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.057522] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
[    0.057566] pci 0000:00:10.1: reg 0x20: [io  0x1820-0x183f]
[    0.057607] pci 0000:00:10.1: supports D1 D2
[    0.057610] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.057671] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
[    0.057716] pci 0000:00:10.2: reg 0x20: [io  0x1840-0x185f]
[    0.057756] pci 0000:00:10.2: supports D1 D2
[    0.057760] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.057822] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
[    0.057866] pci 0000:00:10.3: reg 0x20: [io  0x1860-0x187f]
[    0.057907] pci 0000:00:10.3: supports D1 D2
[    0.057910] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.057978] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
[    0.057997] pci 0000:00:10.4: reg 0x10: [mem 0xf1200000-0xf12000ff]
[    0.058074] pci 0000:00:10.4: supports D1 D2
[    0.058077] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.058146] pci 0000:00:11.0: [1106:3372] type 00 class 0x060100
[    0.058292] pci 0000:00:11.7: [1106:287e] type 00 class 0x060000
[    0.058395] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
[    0.058413] pci 0000:00:12.0: reg 0x10: [io  0x1400-0x14ff]
[    0.058424] pci 0000:00:12.0: reg 0x14: [mem 0xf1200100-0xf12001ff]
[    0.058487] pci 0000:00:12.0: supports D1 D2
[    0.058490] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.058553] pci 0000:00:13.0: [1106:337b] type 01 class 0x060400
[    0.058672] pci 0000:00:13.1: [1106:337a] type 01 class 0x060401
[    0.058797] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[    0.058856] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[    0.058913] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[    0.058969] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[    0.059081] pci 0000:01:00.0: [1106:3230] type 00 class 0x030000
[    0.059098] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[    0.059107] pci 0000:01:00.0: reg 0x14: [mem 0xf0000000-0xf0ffffff]
[    0.059138] pci 0000:01:00.0: reg 0x30: [mem 0xf1000000-0xf100ffff pref]
[    0.059166] pci 0000:01:00.0: supports D1 D2
[    0.059230] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.059237] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf10fffff]
[    0.059242] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff pref]
[    0.059311] pci 0000:00:02.0: PCI bridge to [bus 02]
[    0.059384] pci 0000:00:03.0: PCI bridge to [bus 03]
[    0.059453] pci 0000:04:01.0: [1106:3288] type 00 class 0x040300
[    0.059470] pci 0000:04:01.0: reg 0x10: [mem 0xf1100000-0xf1103fff 64bit]
[    0.059536] pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
[    0.059621] pci 0000:00:13.0: PCI bridge to [bus 04]
[    0.059628] pci 0000:00:13.0:   bridge window [mem 0xf1100000-0xf11fffff]
[    0.059712] pci 0000:00:13.1: PCI bridge to [bus 05] (subtractive decode)
[    0.059723] pci 0000:00:13.1:   bridge window [io  0x0d00-0x1fff] (subtractive decode)
[    0.059727] pci 0000:00:13.1:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[    0.059730] pci 0000:00:13.1:   bridge window [mem 0xe0000000-0xf12fffff] (subtractive decode)
[    0.059733] pci 0000:00:13.1:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.059737] pci 0000:00:13.1:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.059762] pci_bus 0000:00: on NUMA node 0
[    0.059884] ACPI: \_SB_.PCI0: notify handler is installed
[    0.059891] Found 1 acpi root devices
[    0.060048] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.060051] vgaarb: loaded
[    0.060053] vgaarb: bridge control possible 0000:01:00.0
[    0.060131] PCI: Using ACPI for IRQ routing
[    0.068577] PCI: pci_cache_line_size set to 64 bytes
[    0.068654] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.068658] e820: reserve RAM buffer [mem 0x7debd000-0x7fffffff]
[    0.068851] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.068858] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.068864] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.070965] Switched to clocksource hpet
[    0.070965] pnp: PnP ACPI init
[    0.070965] ACPI: bus type PNP registered
[    0.070965] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.070965] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.070965] pnp 00:02: [dma 2]
[    0.070965] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.070965] system 00:03: [io  0x0500-0x057f] has been reserved
[    0.070965] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.070965] system 00:03: [io  0x0400-0x040f] has been reserved
[    0.070965] system 00:03: [mem 0x7e000000-0x7fffffff] has been reserved
[    0.070965] system 00:03: [mem 0xfec00000-0xfec000ff] could not be reserved
[    0.070965] system 00:03: [mem 0xff000000-0xffffffff] has been reserved
[    0.070965] system 00:03: [mem 0xfecc0000-0xfecc00ff] could not be reserved
[    0.070965] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[    0.070965] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.070965] pnp: PnP ACPI: found 4 devices
[    0.070965] ACPI: bus type PNP unregistered
[    0.070965] PnPBIOS: Disabled by ACPI PNP
[    0.106909] pci 0000:00:02.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.106917] pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[    0.106922] pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[    0.106933] pci 0000:00:03.0: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.106937] pci 0000:00:03.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[    0.106941] pci 0000:00:03.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[    0.106965] pci 0000:00:02.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.106969] pci 0000:00:02.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.106973] pci 0000:00:03.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.106977] pci 0000:00:03.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.106980] pci 0000:00:02.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.106984] pci 0000:00:03.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.106991] pci 0000:00:02.0: BAR 14: can't assign mem (size 0x200000)
[    0.106997] pci 0000:00:02.0: BAR 15: can't assign mem pref (size 0x200000)
[    0.107001] pci 0000:00:03.0: BAR 14: can't assign mem (size 0x200000)
[    0.107005] pci 0000:00:03.0: BAR 15: can't assign mem pref (size 0x200000)
[    0.107011] pci 0000:00:02.0: BAR 13: can't assign io (size 0x1000)
[    0.107016] pci 0000:00:03.0: BAR 13: can't assign io (size 0x1000)
[    0.107021] pci 0000:00:03.0: BAR 14: can't assign mem (size 0x200000)
[    0.107026] pci 0000:00:03.0: BAR 15: can't assign mem pref (size 0x200000)
[    0.107031] pci 0000:00:03.0: BAR 13: can't assign io (size 0x1000)
[    0.107035] pci 0000:00:02.0: BAR 14: can't assign mem (size 0x200000)
[    0.107039] pci 0000:00:02.0: BAR 15: can't assign mem pref (size 0x200000)
[    0.107044] pci 0000:00:02.0: BAR 13: can't assign io (size 0x1000)
[    0.107048] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.107055] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf10fffff]
[    0.107060] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff pref]
[    0.107067] pci 0000:00:02.0: PCI bridge to [bus 02]
[    0.107079] pci 0000:00:03.0: PCI bridge to [bus 03]
[    0.107092] pci 0000:00:13.0: PCI bridge to [bus 04]
[    0.107098] pci 0000:00:13.0:   bridge window [mem 0xf1100000-0xf11fffff]
[    0.107106] pci 0000:00:13.1: PCI bridge to [bus 05]
[    0.107117] pci_bus 0000:00: resource 4 [io  0x0d00-0x1fff]
[    0.107121] pci_bus 0000:00: resource 5 [mem 0xc0000000-0xdfffffff]
[    0.107124] pci_bus 0000:00: resource 6 [mem 0xe0000000-0xf12fffff]
[    0.107127] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[    0.107130] pci_bus 0000:00: resource 8 [io  0x0000-0x0cf7]
[    0.107134] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff]
[    0.107138] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref]
[    0.107141] pci_bus 0000:04: resource 1 [mem 0xf1100000-0xf11fffff]
[    0.107145] pci_bus 0000:05: resource 4 [io  0x0d00-0x1fff]
[    0.107148] pci_bus 0000:05: resource 5 [mem 0xc0000000-0xdfffffff]
[    0.107152] pci_bus 0000:05: resource 6 [mem 0xe0000000-0xf12fffff]
[    0.107155] pci_bus 0000:05: resource 7 [mem 0x000a0000-0x000bffff]
[    0.107158] pci_bus 0000:05: resource 8 [io  0x0000-0x0cf7]
[    0.107199] NET: Registered protocol family 2
[    0.107376] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.107403] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.107445] TCP: Hash tables configured (established 8192 bind 8192)
[    0.107510] TCP: reno registered
[    0.107515] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.107526] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.107613] NET: Registered protocol family 1
[    0.107628] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[    0.107654] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.107660] pci 0000:00:02.0: MSI quirk detected; subordinate MSI disabled
[    0.108108] pci 0000:01:00.0: Boot video device
[    0.108115] PCI: CLS 64 bytes, default 64
[    0.108184] Unpacking initramfs...
[    0.531318] Freeing initrd memory: 13376K (f65d0000 - f72e0000)
[    0.531469] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.531517] microcode: AMD CPU family 0xf not supported
[    0.531789] audit: initializing netlink socket (disabled)
[    0.531805] type=2000 audit(1397908765.528:1): initialized
[    0.548601] bounce pool size: 64 pages
[    0.548610] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.548880] VFS: Disk quotas dquot_6.5.2
[    0.548908] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.549016] msgmni has been set to 1731
[    0.549311] alg: No test for stdrng (krng)
[    0.549344] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.549377] io scheduler noop registered
[    0.549379] io scheduler deadline registered
[    0.549386] io scheduler cfq registered (default)
[    0.549501] pcieport 0000:00:02.0: device [1106:a238] has invalid IRQ; check vendor BIOS
[    0.549637] pcieport 0000:00:03.0: device [1106:c238] has invalid IRQ; check vendor BIOS
[    0.549760] ioapic: probe of 0000:00:00.5 failed with error -22
[    0.549773] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.549798] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.549864] GHES: HEST is not enabled!
[    0.549867] isapnp: ISA Plug & Play support disabled
[    0.549950] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.570362] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.570724] Linux agpgart interface v0.103
[    0.570773] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0336]
[    0.570783] agpgart-amd64 0000:00:00.0: aperture from AGP @ c0000000 size 256 MB
[    0.579270] agpgart-amd64 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    0.579447] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.579949] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.579959] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.580133] mousedev: PS/2 mouse device common for all mice
[    0.580194] rtc_cmos rtc_cmos: RTC can wake from S4
[    0.580391] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    0.580450] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    0.580605] TCP: cubic registered
[    0.580619] NET: Registered protocol family 10
[    0.580839] mip6: Mobile IPv6
[    0.580843] NET: Registered protocol family 17
[    0.580847] mpls_gso: MPLS GSO support
[    0.581024] Using IPI No-Shortcut mode
[    0.581126] registered taskstats version 1
[    0.581678] rtc_cmos rtc_cmos: setting system clock to 2014-04-19 11:59:26 UTC (1397908766)
[    0.581715] PM: Hibernation image not present or could not be loaded.
[    0.582109] Freeing unused kernel memory: 536K (c15da000 - c1660000)
[    0.582134] Write protecting the kernel text: 4324k
[    0.582172] Write protecting the kernel read-only data: 1292k
[    0.582174] NX-protecting the kernel data: 3868k
[    0.652257] udevd[53]: starting version 175
[    0.703448] ACPI: bus type USB registered
[    0.703490] usbcore: registered new interface driver usbfs
[    0.703508] usbcore: registered new interface driver hub
[    0.726612] SCSI subsystem initialized
[    0.746587] usbcore: registered new device driver usb
[    0.747204] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.747646] uhci_hcd: USB Universal Host Controller Interface driver
[    0.747757] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    0.747766] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[    0.747827] uhci_hcd 0000:00:10.0: irq 20, io base 0x00001800
[    0.748771] ehci-pci: EHCI PCI platform driver
[    0.753588] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[    0.761167] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    0.761174] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.761178] usb usb1: Product: UHCI Host Controller
[    0.761181] usb usb1: Manufacturer: Linux 3.13-0.bpo.1-686-pae uhci_hcd
[    0.761184] usb usb1: SerialNumber: 0000:00:10.0
[    0.761351] hub 1-0:1.0: USB hub found
[    0.761361] hub 1-0:1.0: 2 ports detected
[    0.761695] ehci-pci 0000:00:10.4: EHCI Host Controller
[    0.761706] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 2
[    0.761722] ehci-pci 0000:00:10.4: debug port 1
[    0.761793] ehci-pci 0000:00:10.4: irq 21, io mem 0xf1200000
[    0.768120] libata version 3.00 loaded.
[    0.772135] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    0.772208] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.772212] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.772215] usb usb2: Product: EHCI Host Controller
[    0.772218] usb usb2: Manufacturer: Linux 3.13-0.bpo.1-686-pae ehci_hcd
[    0.772221] usb usb2: SerialNumber: 0000:00:10.4
[    0.772374] hub 2-0:1.0: USB hub found
[    0.772384] hub 2-0:1.0: 8 ports detected
[    0.796208] hub 1-0:1.0: USB hub found
[    0.796222] hub 1-0:1.0: 2 ports detected
[    0.796867] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0x11400, 00:00:de:ad:be:ef, IRQ 23
[    0.797648] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x7949 advertising 0de1 Link 0000
[    0.798134] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    0.798147] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    0.798207] uhci_hcd 0000:00:10.1: irq 22, io base 0x00001820
[    0.799950] FDC 0 is a post-1991 82077
[    0.800075] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.800079] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.800082] usb usb3: Product: UHCI Host Controller
[    0.800085] usb usb3: Manufacturer: Linux 3.13-0.bpo.1-686-pae uhci_hcd
[    0.800088] usb usb3: SerialNumber: 0000:00:10.1
[    0.801435] hub 3-0:1.0: USB hub found
[    0.801460] hub 3-0:1.0: 2 ports detected
[    0.801589] pata_via 0000:00:0f.1: version 0.3.4
[    0.806786] scsi0 : pata_via
[    0.811733] scsi1 : pata_via
[    0.811810] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1890 irq 14
[    0.811814] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1898 irq 15
[    0.811873] sata_via 0000:00:0f.0: version 2.6
[    0.811984] sata_via 0000:00:0f.0: routed to hard irq line 0
[    0.816570] scsi2 : sata_via
[    0.820063] scsi3 : sata_via
[    0.820144] ata3: SATA max UDMA/133 cmd 0x18a0 ctl 0x18b0 bmdma 0x1880 irq 21
[    0.820147] ata4: SATA max UDMA/133 cmd 0x18a8 ctl 0x18b4 bmdma 0x1888 irq 21
[    0.820269] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    0.820278] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    0.820310] uhci_hcd 0000:00:10.2: irq 21, io base 0x00001840
[    0.820389] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.820392] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.820395] usb usb4: Product: UHCI Host Controller
[    0.820398] usb usb4: Manufacturer: Linux 3.13-0.bpo.1-686-pae uhci_hcd
[    0.820401] usb usb4: SerialNumber: 0000:00:10.2
[    0.820556] hub 4-0:1.0: USB hub found
[    0.820566] hub 4-0:1.0: 2 ports detected
[    0.820736] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    0.820744] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    0.820800] uhci_hcd 0000:00:10.3: irq 23, io base 0x00001860
[    0.820871] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.820874] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.820877] usb usb5: Product: UHCI Host Controller
[    0.820880] usb usb5: Manufacturer: Linux 3.13-0.bpo.1-686-pae uhci_hcd
[    0.820883] usb usb5: SerialNumber: 0000:00:10.3
[    0.821030] hub 5-0:1.0: USB hub found
[    0.821041] hub 5-0:1.0: 2 ports detected
[    1.024028] ata3: SATA link up 1.5 Gbps (SStatus 123 SControl 300)
[    1.084630] random: nonblocking pool is initialized
[    1.188313] ata3.00: ATA-8: SAMSUNG 470 Series SSD, AXM09B1Q, max UDMA/133
[    1.188318] ata3.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.196026] usb 2-3: new high-speed USB device number 4 using ehci-pci
[    1.196352] ata3.00: configured for UDMA/133
[    1.196489] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG 470 Seri AXM0 PQ: 0 ANSI: 5
[    1.344163] usb 2-3: New USB device found, idVendor=148f, idProduct=2870
[    1.344169] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.344172] usb 2-3: Product: 802.11 n WLAN
[    1.344175] usb 2-3: Manufacturer: Ralink
[    1.400023] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    1.425395] sd 2:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[    1.425478] sd 2:0:0:0: [sda] Write Protect is off
[    1.425482] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.425507] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.427725]  sda: sda1 sda2
[    1.428306] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.431269] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.485107] device-mapper: uevent: version 1.0.3
[    1.485757] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.528025] tsc: Refined TSC clocksource calibration: 1800.064 MHz
[    1.844056] usb 1-1: new low-speed USB device number 2 using uhci_hcd
[    2.009116] usb 1-1: New USB device found, idVendor=1241, idProduct=1122
[    2.009119] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.016257] hidraw: raw HID events driver (C) Jiri Kosina
[    2.037012] usbcore: registered new interface driver usbhid
[    2.037019] usbhid: USB HID core driver
[    2.041266] input: HID 1241:1122 as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0/input/input2
[    2.041530] hid-generic 0003:1241:1122.0001: input,hidraw0: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:10.0-1/input0
[    2.252024] usb 1-2: new low-speed USB device number 3 using uhci_hcd
[    2.431124] usb 1-2: New USB device found, idVendor=046d, idProduct=c312
[    2.431128] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.431132] usb 1-2: Product: USB Multimedia Keyboard
[    2.431134] usb 1-2: Manufacturer: LITEON Technology
[    2.450229] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/input/input3
[    2.450471] hid-generic 0003:046D:C312.0002: input,hidraw1: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:10.0-2/input0
[    2.528069] Switched to clocksource tsc
[   20.756314] bio: create slab <bio-1> at 1
[   20.918437] bio: create slab <bio-1> at 1
[   21.005450] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[   21.770048] udevd[271]: starting version 175
[   22.103206] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,discard
[   22.143918] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[   22.143927] ACPI: Power Button [PWRF]
[   22.162150] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   22.305709] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   22.437962] powernow-k8: fid 0xa (1800 MHz), vid 0x6
[   22.437968] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[   22.438015] powernow-k8: Found 1 AMD Sempron(tm) Processor 3200+ (1 cpu cores) (version 2.20.00)
[   22.460909] cfg80211: Calling CRDA to update world regulatory domain
[   22.531127] snd_hda_intel 0000:04:01.0: PCI: Disallowing DAC for device
[   22.558461] hda_codec: ALC662 rev1: SKU not ready 0x411111f0
[   22.585723] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/input/input7
[   22.665115] input: HDA VIA VT82xx Front Headphone as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input14
[   22.671051] input: HDA VIA VT82xx Line Out CLFE as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input13
[   22.671653] input: HDA VIA VT82xx Line Out Surround as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input12
[   22.671757] input: HDA VIA VT82xx Line Out Front as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input11
[   22.672360] input: HDA VIA VT82xx Line as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input10
[   22.674222] input: HDA VIA VT82xx Rear Mic as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input9
[   22.674625] input: HDA VIA VT82xx Front Mic as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input8
[   22.700081] usb 2-3: reset high-speed USB device number 4 using ehci-pci
[   22.846354] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2872, rev 0202 detected
[   22.900786] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
[   22.953311] cfg80211: World regulatory domain updated:
[   22.953317] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   22.953321] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   22.953324] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   22.953326] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   22.953329] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   22.953331] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   22.961363] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   22.965926] usbcore: registered new interface driver rt2800usb
[   23.058761] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
[   25.023441] lp: driver loaded but no devices found
[   25.069505] ppdev: user-space parallel port driver
[   25.148135] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
[   25.276448] parport0: irq 7 detected
[   25.377245] lp0: using parport0 (polling).
[   25.463175] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[   25.502697] rt2800usb 2-3:1.0: firmware: direct-loading firmware rt2870.bin
[   25.502710] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[   25.834948] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   28.673077] postgres (1102): /proc/1102/oom_adj is deprecated, please use /proc/1102/oom_score_adj instead.
[   28.819033] tsc: Marking TSC unstable due to cpufreq changes
[   28.820773] Switched to clocksource hpet
[   42.610759] [drm] Initialized drm 1.1.0 20060810
[   42.617527] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   42.617535] [drm] No driver support for vblank timestamp query.
[   42.617540] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0
[   42.627914] agpgart-amd64 0000:00:00.0: AGP 3.5 bridge
[   42.627942] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[   42.628088] pci 0000:01:00.0: putting AGP V3 device into 8x mode
[   61.221975] wlan1: authenticate with 74:44:01:96:00:50
[   61.267442] wlan1: send auth to 74:44:01:96:00:50 (try 1/3)
[   61.271200] wlan1: authenticated
[   61.272047] wlan1: associate with 74:44:01:96:00:50 (try 1/3)
[   61.275701] wlan1: RX AssocResp from 74:44:01:96:00:50 (capab=0x431 status=0 aid=7)
[   61.284433] wlan1: associated
[   61.284547] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[  949.916628] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 0
[  949.916661] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 0
[  949.916668] ieee80211 phy0: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 15 in queue 0
[  950.015025] ieee80211 phy0: rt2800usb_txdone: Warning - Got TX status for an empty queue 0, dropping