[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffaafff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dffab000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-9491-gcd4165a-dirty 04/27/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x160000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 base 0000F8000000 mask FFFFFC000000 write-combining
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000160000000 aka 5632M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xdffab max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15fe00000-0x15fffffff]
[    0.000000]  [mem 0x15fe00000-0x15fffffff] page 2M
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15c000000-0x15fdfffff]
[    0.000000]  [mem 0x15c000000-0x15fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
[    0.000000]  [mem 0x100000000-0x13fffffff] page 1G
[    0.000000]  [mem 0x140000000-0x15bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xdffaafff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xdfdfffff] page 2M
[    0.000000]  [mem 0xdfe00000-0xdffaafff] page 4k
[    0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000DFFB40E0 000064 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000DFFB68A0 000074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000DFFB4250 002644 (v02 ASUS   COREBOOT 00000001 INTL 20150204)
[    0.000000] ACPI: FACS 0x00000000DFFB4210 000040
[    0.000000] ACPI: SSDT 0x00000000DFFB69A0 000D57 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: APIC 0x00000000DFFB7700 0000C6 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB77D0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB7948 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000DFFB7980 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB79C0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB7B38 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff]
[    0.000000] SRAT: Node 1 PXM 1 [mem 0x120000000-0x15fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=3
[    0.000000] NUMA: node 2 [mem 0x00100000-0xdfffffff] overlaps with node 0 [mem 0x00100000-0xdfffffff]
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of physical nodes 2
[    0.000000] Node 0 MemBase 0000000000000000 Limit 0000000120000000
[    0.000000] Node 1 MemBase 0000000120000000 Limit 0000000160000000
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
[    0.000000]   NODE_DATA [mem 0x11fffb000-0x11fffffff]
[    0.000000] Initmem setup node 1 [mem 0x120000000-0x15fffffff]
[    0.000000]   NODE_DATA [mem 0x15fff9000-0x15fffdfff]
[    0.000000] [ffffea0003f00000-ffffea0003ffffff] potential offnode page_structs
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0
[    0.000000]  [ffffea0004000000-ffffea0004dfffff] PMD -> [ffff88015e600000-ffff88015f3fffff] on node 1
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x15fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xdffaafff]
[    0.000000]   node   0: [mem 0x100000000-0x11fffffff]
[    0.000000]   node   1: [mem 0x120000000-0x15fffffff]
[    0.000000] On node 0 totalpages: 1048393
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12487 pages used for memmap
[    0.000000]   DMA32 zone: 913323 pages, LIFO batch:31
[    0.000000]   Normal zone: 1792 pages used for memmap
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] On node 1 totalpages: 262144
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdffab000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xffffffff]
[    0.000000] e820: [mem 0xf0000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 
[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1292597
[    0.000000] Policy zone: Normal
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xe5fa000000-0xe5fbffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
[    0.000000] Memory: 5015508K/5242148K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 226640K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1909.856 MHz processor
[    0.000161] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.71 BogoMIPS (lpj=7639424)
[    0.010953] pid_max: default: 32768 minimum: 301
[    0.015675] ACPI: Core revision 20140424
[    0.022053] ACPI: All ACPI Tables successfully acquired
[    0.027566] Security Framework initialized
[    0.031744] AppArmor: AppArmor disabled by boot time parameter
[    0.037654] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.045473] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.058769] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.068635] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.075632] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.083589] Initializing cgroup subsys memory
[    0.088073] Initializing cgroup subsys devices
[    0.092621] Initializing cgroup subsys freezer
[    0.097156] Initializing cgroup subsys net_cls
[    0.101690] Initializing cgroup subsys blkio
[    0.106046] Initializing cgroup subsys perf_event
[    0.110843] Initializing cgroup subsys net_prio
[    0.115500] tseg: 0000000000
[    0.115513] CPU: Physical Processor ID: 0
[    0.119635] CPU: Processor Core ID: 0
[    0.124428] mce: CPU supports 6 MCE banks
[    0.128564] LVT offset 0 assigned for vector 0xf9
[    0.133366] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.148853] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
[    0.157992] ftrace: allocating 21601 entries in 85 pages
[    0.173478] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.219118] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
[    0.336303] Performance Events: AMD PMU driver.
[    0.341026] ... version:                0
[    0.345103] ... bit width:              48
[    0.349268] ... generic registers:      4
[    0.353367] ... value mask:             0000ffffffffffff
[    0.358752] ... max period:             00007fffffffffff
[    0.364131] ... fixed-purpose events:   0
[    0.368208] ... event mask:             000000000000000f
[    0.376196] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.384512] x86: Booting SMP configuration:
[    0.388786] .... node  #0, CPUs:      #1 #2 #3
[    0.433363] .... node  #1, CPUs:   #4 #5 #6 #7
[    0.585038] x86: Booted up 2 nodes, 8 CPUs
[    0.589466] smpboot: Total of 8 processors activated (30558.08 BogoMIPS)
[    0.602141] devtmpfs: initialized
[    0.614142] pinctrl core: initialized pinctrl subsystem
[    0.619614] NET: Registered protocol family 16
[    0.624347] cpuidle: using governor ladder
[    0.628522] cpuidle: using governor menu
[    0.632528] node 0 link 1: io port [1000, 3fff]
[    0.632531] TOM: 00000000e0000000 aka 3584M
[    0.636788] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.636792] node 0 link 1: mmio [fc000000, fc3fffff]
[    0.636795] node 0 link 1: mmio [f8000000, fbffffff]
[    0.636798] TOM2: 0000000160000000 aka 5632M
[    0.641149] bus: [bus 00-05] on node 0 link 1
[    0.641151] bus: 00 [io  0x0000-0xffff]
[    0.641152] bus: 00 [mem 0xf0000000-0xffffffff]
[    0.641154] bus: 00 [mem 0x160000000-0xfcffffffff]
[    0.641260] ACPI: bus type PCI registered
[    0.645345] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.652022] PCI: Using configuration type 1 for base access
[    0.657668] PCI: Using configuration type 1 for extended access
[    0.664290] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.670643] mtrr: probably your BIOS does not setup all CPUs.
[    0.676467] mtrr: corrected configuration.
[    0.693187] ACPI: Added _OSI(Module Device)
[    0.697501] ACPI: Added _OSI(Processor Device)
[    0.702023] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.706805] ACPI: Added _OSI(Processor Aggregator Device)
[    0.715683] ACPI: Interpreter enabled
[    0.719432] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.728906] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[    0.738354] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[    0.747791] ACPI: (supports S0 S1 S5)
[    0.751524] ACPI: Using IOAPIC for interrupt routing
[    0.756607] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.784839] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[    0.791097] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.799413] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.836241] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.846358] PCI host bridge to bus 0000:00
[    0.850528] pci_bus 0000:00: root bus resource [bus 00-05]
[    0.856084] pci_bus 0000:00: root bus resource [io  0x0d00-0x3fff]
[    0.862342] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[    0.869290] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
[    0.876237] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.882505] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.882698] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[    0.882705] pci 0000:00:01.0: reg 0x10: [io  0x2c00-0x2c7f]
[    0.882833] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.882841] pci 0000:00:01.1: reg 0x10: [io  0x3000-0x301f]
[    0.882866] pci 0000:00:01.1: reg 0x20: [io  0x2c80-0x2cbf]
[    0.882880] pci 0000:00:01.1: reg 0x24: [io  0x2cc0-0x2cff]
[    0.882907] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.883011] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.883027] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
[    0.883054] pci 0000:00:02.0: supports D1 D2
[    0.883066] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.883114] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.888916] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.888929] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
[    0.888967] pci 0000:00:02.1: supports D1 D2
[    0.888971] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.889052] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.894869] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.894895] pci 0000:00:06.0: reg 0x20: [io  0x3020-0x302f]
[    0.894919] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.902147] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.908760] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.915993] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.922710] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.922721] pci 0000:00:07.0: reg 0x10: [io  0x3050-0x3057]
[    0.922726] pci 0000:00:07.0: reg 0x14: [io  0x3070-0x3073]
[    0.922731] pci 0000:00:07.0: reg 0x18: [io  0x3058-0x305f]
[    0.922735] pci 0000:00:07.0: reg 0x1c: [io  0x3074-0x3077]
[    0.922740] pci 0000:00:07.0: reg 0x20: [io  0x3030-0x303f]
[    0.922745] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
[    0.922915] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.922924] pci 0000:00:08.0: reg 0x10: [io  0x3060-0x3067]
[    0.922929] pci 0000:00:08.0: reg 0x14: [io  0x3078-0x307b]
[    0.922934] pci 0000:00:08.0: reg 0x18: [io  0x3068-0x306f]
[    0.922938] pci 0000:00:08.0: reg 0x1c: [io  0x307c-0x307f]
[    0.922943] pci 0000:00:08.0: reg 0x20: [io  0x3040-0x304f]
[    0.922948] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
[    0.923134] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[    0.923219] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.929015] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.929064] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.929116] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.934908] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.934963] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.935019] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.940839] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.940889] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.940953] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.946746] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.946795] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.946865] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.952695] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.952837] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.952945] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.953052] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.953193] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.953319] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[    0.953446] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[    0.953598] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[    0.953719] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[    0.953821] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[    0.954003] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[    0.954023] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.954032] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
[    0.954042] pci 0000:01:04.0: reg 0x18: [io  0x1000-0x107f]
[    0.954086] pci 0000:01:04.0: supports D1 D2
[    0.954196] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.959259] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    0.959262] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.959265] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    0.959387] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[    0.959427] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
[    0.959463] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref]
[    0.959536] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.959620] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.969743] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.974806] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.974916] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[    0.974941] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
[    0.975055] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.975174] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.985291] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.990348] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    0.990432] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.995564] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.000645] pci_bus 0000:00: on NUMA node 0
[    1.000745] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    1.007165] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    1.013622] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    1.021275] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    1.028949] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    1.036612] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[    1.044277] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    1.050702] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[    1.057121] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[    1.064769] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    1.072431] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    1.080090] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[    1.086508] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[    1.092937] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[    1.100602] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[    1.108259] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[    1.115928] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.125041] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[    1.131770] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[    1.138488] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[    1.145194] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[    1.152187] ACPI: Enabled 1 GPEs in block 00 to 1F
[    1.157445] vgaarb: setting as boot device: PCI:0000:01:04.0
[    1.163230] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[    1.171422] vgaarb: loaded
[    1.174217] vgaarb: bridge control possible 0000:01:04.0
[    1.179791] PCI: Using ACPI for IRQ routing
[    1.184080] PCI: pci_cache_line_size set to 64 bytes
[    1.184137] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.184140] e820: reserve RAM buffer [mem 0xdffab000-0xdfffffff]
[    1.184454] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.191592] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    1.196866] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    1.205617] Switched to clocksource hpet
[    1.221135] pnp: PnP ACPI init
[    1.224353] ACPI: bus type PNP registered
[    1.228989] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.229069] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.229167] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.229245] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.229286] pnp 00:04: [dma 2]
[    1.229328] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.229349] pnp: PnP ACPI: found 5 devices
[    1.233541] ACPI: bus type PNP unregistered
[    1.245608] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window
[    1.255670] pci 0000:00:09.0: PCI bridge to [bus 01]
[    1.260725] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    1.266901] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    1.273773] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    1.281108] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
[    1.288470] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.293521] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    1.300396] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    1.305441] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    1.312310] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    1.317375] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.322426] pci_bus 0000:00: resource 4 [io  0x0d00-0x3fff]
[    1.322429] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
[    1.322432] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
[    1.322435] pci_bus 0000:00: resource 7 [io  0x0000-0x0cf7]
[    1.322438] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    1.322440] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[    1.322443] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[    1.322446] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
[    1.322449] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
[    1.322586] NET: Registered protocol family 2
[    1.327532] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.335310] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.342727] TCP: Hash tables configured (established 65536 bind 65536)
[    1.349404] TCP: reno registered
[    1.352723] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.358998] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.365854] NET: Registered protocol family 1
[    1.370706] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    1.376928] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.382917] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.388538] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.394119] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    1.399769] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.405399] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.410980] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    1.416639] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.422253] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.427830] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    1.433491] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.439098] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.444679] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    1.450338] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.455935] pci 0000:01:04.0: Video device with shadowed ROM
[    1.455943] PCI: CLS 64 bytes, default 64
[    1.456053] Unpacking initramfs...
[    1.689024] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
[    1.696993] PCI-DMA: Disabling AGP.
[    1.702205] PCI-DMA: aperture base @ d4000000 size 65536 KB
[    1.707875] PCI-DMA: using GART IOMMU.
[    1.711713] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.723820] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.732163] microcode: CPU0: patch_level=0x01000096
[    1.737164] microcode: CPU1: patch_level=0x01000096
[    1.742173] microcode: CPU2: patch_level=0x01000096
[    1.747184] microcode: CPU3: patch_level=0x01000096
[    1.752193] microcode: CPU4: patch_level=0x01000096
[    1.757190] microcode: CPU5: patch_level=0x01000096
[    1.762184] microcode: CPU6: patch_level=0x01000096
[    1.768284] microcode: CPU7: patch_level=0x01000096
[    1.773375] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.782318] LVT offset 1 assigned for vector 0x400
[    1.787224] IBS: LVT offset 1 assigned
[    1.791097] perf: AMD IBS detected (0x00000007)
[    1.796326] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.802802] audit: initializing netlink subsys (disabled)
[    1.808310] audit: type=2000 audit(1430158593.620:1): initialized
[    1.815233] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.821739] zbud: loaded
[    1.824703] VFS: Disk quotas dquot_6.5.2
[    1.828745] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.835400] msgmni has been set to 9941
[    1.839869] alg: No test for stdrng (krng)
[    1.844161] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.851794] io scheduler noop registered
[    1.855821] io scheduler deadline registered
[    1.860261] io scheduler cfq registered (default)
[    1.865263] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[    1.865396] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[    1.865525] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[    1.865650] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[    1.865813] aer 0000:00:0b.0:pcie02: service driver aer loaded
[    1.865840] aer 0000:00:0c.0:pcie02: service driver aer loaded
[    1.865866] aer 0000:00:0d.0:pcie02: service driver aer loaded
[    1.865892] aer 0000:00:0e.0:pcie02: service driver aer loaded
[    1.865912] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    1.873008] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.879631] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    1.879641] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    1.886683] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.893285] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    1.893295] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[    1.900337] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[    1.900349] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[    1.907390] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[    1.907420] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.913122] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.919952] GHES: HEST is not enabled!
[    1.923916] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.950704] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.978515] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.986531] Linux agpgart interface v0.103
[    1.990947] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[    2.001423] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.006519] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.011848] mousedev: PS/2 mouse device common for all mice
[    2.017646] rtc_cmos rtc_cmos: RTC can wake from S4
[    2.022847] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    2.029348] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    2.037308] ledtrig-cpu: registered to indicate activity on CPUs
[    2.043571] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.050091] AMD IOMMUv2 functionality not available on this system
[    2.056494] TCP: cubic registered
[    2.060040] NET: Registered protocol family 10
[    2.065029] mip6: Mobile IPv6
[    2.068115] NET: Registered protocol family 17
[    2.072731] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.081496] mpls_gso: MPLS GSO support
[    2.086242] registered taskstats version 1
[    2.091165] rtc_cmos rtc_cmos: setting system clock to 2015-04-27 18:16:35 UTC (1430158595)
[    2.099758] PM: Hibernation image not present or could not be loaded.
[    2.101596] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
[    2.109611] Write protecting the kernel read-only data: 8192k
[    2.118933] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
[    2.127662] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    2.147760] systemd-udevd[99]: starting version 215
[    2.153321] random: systemd-udevd urandom read with 3 bits of entropy available
[    2.175866] pps_core: LinuxPPS API ver. 1 registered
[    2.180932] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.190547] ACPI: bus type USB registered
[    2.194865] usbcore: registered new interface driver usbfs
[    2.194909] PTP clock support registered
[    2.204573] usbcore: registered new interface driver hub
[    2.210235] usbcore: registered new device driver usb
[    2.210323] tg3.c:v3.137 (May 11, 2014)
[    2.210336] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[    2.210543] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[    2.232016] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.239457] ehci-pci: EHCI PCI platform driver
[    2.244389] ehci-pci 0000:00:02.1: EHCI Host Controller
[    2.249776] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    2.249880] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.263586] ehci-pci 0000:00:02.1: debug port 1
[    2.268277] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    2.268309] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
[    2.285277] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.291213] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.292819] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[    2.292822] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.292824] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.292826] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.292966] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[    2.293166] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[    2.344576] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.351910] usb usb1: Product: EHCI Host Controller
[    2.356873] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.363063] usb usb1: SerialNumber: 0000:00:02.1
[    2.367992] hub 1-0:1.0: USB hub found
[    2.371867] hub 1-0:1.0: 10 ports detected
[    2.377003] ohci-pci: OHCI PCI platform driver
[    2.381786] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    2.387478] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.390514] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[    2.390517] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.390519] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.390521] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.429966] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
[    2.491250] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.498142] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.505478] usb usb2: Product: OHCI PCI host controller
[    2.510783] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.516953] usb usb2: SerialNumber: 0000:00:02.0
[    2.521944] hub 2-0:1.0: USB hub found
[    2.525853] hub 2-0:1.0: 10 ports detected
[    2.535650] FS-Cache: Loaded
[    2.542877] RPC: Registered named UNIX socket transport module.
[    2.549481] RPC: Registered udp transport module.
[    2.555578] RPC: Registered tcp transport module.
[    2.561652] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.574032] FS-Cache: Netfs 'nfs' registered for caching
[    2.587820] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[    2.633241] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    2.721113] tsc: Refined TSC clocksource calibration: 1909.787 MHz
[    3.724860] Switched to clocksource tsc
[    4.213974] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
[    4.220634] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[    4.227628] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    6.931947] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    6.946130] systemd[1]: Detected architecture 'x86-64'.
[    7.144966] random: nonblocking pool is initialized
[    7.160722] systemd[1]: Inserted module 'autofs4'
[    7.167467] systemd[1]: Set hostname to <cb-test-tgt>.
[    7.489122] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[    7.502027] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    7.517416] systemd[1]: Expecting device dev-ttyS0.device...
[    7.531507] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    7.539384] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.547082] systemd[1]: Starting Remote File Systems (Pre).
[    7.563561] systemd[1]: Reached target Remote File Systems (Pre).
[    7.569928] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    7.591551] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.601218] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    7.609447] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    7.617503] systemd[1]: Starting Paths.
[    7.631465] systemd[1]: Reached target Paths.
[    7.635955] systemd[1]: Starting Encrypted Volumes.
[    7.651452] systemd[1]: Reached target Encrypted Volumes.
[    7.657002] systemd[1]: Starting Swap.
[    7.671431] systemd[1]: Reached target Swap.
[    7.675817] systemd[1]: Starting Root Slice.
[    7.731453] systemd[1]: Created slice Root Slice.
[    7.736343] systemd[1]: Starting User and Session Slice.
[    7.751412] systemd[1]: Created slice User and Session Slice.
[    7.757317] systemd[1]: Starting Delayed Shutdown Socket.
[    7.771438] systemd[1]: Listening on Delayed Shutdown Socket.
[    7.777337] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    7.795388] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.802467] systemd[1]: Starting Journal Socket (/dev/log).
[    7.819407] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.825506] systemd[1]: Starting Syslog Socket.
[    7.839387] systemd[1]: Listening on Syslog Socket.
[    7.845531] systemd[1]: Starting udev Kernel Socket.
[    7.859363] systemd[1]: Listening on udev Kernel Socket.
[    7.864848] systemd[1]: Starting udev Control Socket.
[    7.879355] systemd[1]: Listening on udev Control Socket.
[    7.884893] systemd[1]: Starting Journal Socket.
[    7.899359] systemd[1]: Listening on Journal Socket.
[    7.904524] systemd[1]: Starting Sockets.
[    7.919348] systemd[1]: Reached target Sockets.
[    7.924044] systemd[1]: Starting System Slice.
[    7.939345] systemd[1]: Created slice System Slice.
[    7.944392] systemd[1]: Starting system-getty.slice.
[    7.959344] systemd[1]: Created slice system-getty.slice.
[    7.964880] systemd[1]: Starting system-serial\x2dgetty.slice.
[    7.983331] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    7.990440] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    8.012634] systemd[1]: Mounting Debug File System...
[    8.042204] systemd[1]: Started Set Up Additional Binary Formats.
[    8.048519] systemd[1]: Mounting Huge Pages File System...
[    8.094332] systemd[1]: Starting Load Kernel Modules...
[    8.108745] systemd[1]: Mounting POSIX Message Queue File System...
[    8.128203] systemd[1]: Starting udev Coldplug all Devices...
[    8.144209] systemd[1]: Starting Journal Service...
[    8.171341] systemd[1]: Started Journal Service.
[    8.793645] systemd-udevd[188]: starting version 215
[    9.062492] systemd-journald[168]: Received request to flush runtime journal from PID 1
[    9.926156] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[    9.934480] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[    9.943440] EDAC MC: Ver: 3.0.0
[    9.981602] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    9.981628] SCSI subsystem initialized
[    9.994021] ACPI: Power Button [PWRB]
[    9.997996] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   10.005588] ACPI: Power Button [PWRF]
[   10.118677] w83793 0-002f: Registered watchdog chardev major 10, minor: 130
[   10.125830] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[   10.224037] MCE: In-kernel MCE decoding enabled.
[   10.238483] FDC 0 is a post-1991 82077
[   10.258027] libata version 3.00 loaded.
[   10.260828] AMD64 EDAC driver v3.4.0
[   10.284514] acpi-cpufreq: overriding BIOS provided _PSD data
[   10.291316] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   10.567826] kvm: Nested Virtualization enabled
[   10.572510] kvm: Nested Paging enabled
[   13.361451] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[   13.366896] EDAC amd64: DRAM ECC enabled.
[   13.366920] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.377881] EDAC amd64: F10h detected (node 0).
[   13.382577] EDAC MC: DCT0 chip selects:
[   13.382581] EDAC amd64: MC: 0:     0MB 1:     0MB
[   13.387399] EDAC amd64: MC: 2:     0MB 3:     0MB
[   13.392174] EDAC amd64: MC: 4:     0MB 5:     0MB
[   13.396948] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   13.401730] EDAC MC: DCT1 chip selects:
[   13.401738] EDAC amd64: MC: 0:     0MB 1:     0MB
[   13.406512] EDAC amd64: MC: 2:     0MB 3:     0MB
[   13.411307] EDAC amd64: MC: 4:     0MB 5:     0MB
[   13.416095] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   13.420889] EDAC amd64: using x4 syndromes.
[   13.425154] EDAC amd64: MCT channel count: 2
[   13.429592] EDAC amd64: CS6: Registered DDR2 RAM
[   13.434362] EDAC amd64: CS7: Registered DDR2 RAM
[   13.439505] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[   13.449399] EDAC amd64: DRAM ECC enabled.
[   13.453594] EDAC amd64: F10h detected (node 1).
[   13.458268] EDAC MC: DCT0 chip selects:
[   13.458272] EDAC amd64: MC: 0:  1024MB 1:     0MB
[   13.463073] EDAC amd64: MC: 2:     0MB 3:     0MB
[   13.467882] EDAC amd64: MC: 4:     0MB 5:     0MB
[   13.472689] EDAC amd64: MC: 6:     0MB 7:     0MB
[   13.477506] EDAC MC: DCT1 chip selects:
[   13.477514] EDAC amd64: MC: 0:     0MB 1:     0MB
[   13.482317] EDAC amd64: MC: 2:     0MB 3:     0MB
[   13.487137] EDAC amd64: MC: 4:     0MB 5:     0MB
[   13.491949] EDAC amd64: MC: 6:     0MB 7:     0MB
[   13.496756] EDAC amd64: using x4 syndromes.
[   13.501044] EDAC amd64: MCT channel count: 1
[   13.505447] EDAC amd64: CS0: Registered DDR2 RAM
[   13.510408] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
[   13.520270] sata_nv 0000:00:07.0: version 3.5
[   13.520298] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[   13.520664] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[   13.521511] scsi0 : sata_nv
[   13.540383] scsi1 : sata_nv
[   13.543429] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[   13.550692] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[   13.558144] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[   13.564491] scsi2 : sata_nv
[   13.567598] scsi3 : sata_nv
[   13.570569] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[   13.577847] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[   13.585319] pata_amd 0000:00:06.0: version 0.4.1
[   13.586229] scsi4 : pata_amd
[   13.589536] scsi5 : pata_amd
[   13.592605] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[   13.599687] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[   13.869271] ata1: SATA link down (SStatus 0 SControl 300)
[   13.893271] ata3: SATA link down (SStatus 0 SControl 300)
[   14.185149] ata2: SATA link down (SStatus 0 SControl 300)
[   14.501051] ata4: SATA link down (SStatus 0 SControl 300)