[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffa8fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dffa9000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-9139-gf85640d-dirty 04/14/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x160000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 base 0000F8000000 mask FFFFFC000000 write-combining
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000160000000 aka 5632M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xdffa9 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15fe00000-0x15fffffff]
[    0.000000]  [mem 0x15fe00000-0x15fffffff] page 2M
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15c000000-0x15fdfffff]
[    0.000000]  [mem 0x15c000000-0x15fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
[    0.000000]  [mem 0x100000000-0x13fffffff] page 1G
[    0.000000]  [mem 0x140000000-0x15bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xdffa8fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xdfdfffff] page 2M
[    0.000000]  [mem 0xdfe00000-0xdffa8fff] page 4k
[    0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000DFFB20E0 000064 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000DFFB48A0 000074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000DFFB2250 002644 (v02 ASUS   COREBOOT 00000001 INTL 20150204)
[    0.000000] ACPI: FACS 0x00000000DFFB2210 000040
[    0.000000] ACPI: SSDT 0x00000000DFFB49A0 000D57 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: APIC 0x00000000DFFB5700 0000C6 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB57D0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB5948 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000DFFB5980 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB59C0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB5B38 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff]
[    0.000000] SRAT: Node 1 PXM 1 [mem 0x120000000-0x15fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=3
[    0.000000] NUMA: node 2 [mem 0x00100000-0xdfffffff] overlaps with node 0 [mem 0x00100000-0xdfffffff]
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of physical nodes 2
[    0.000000] Node 0 MemBase 0000000000000000 Limit 0000000120000000
[    0.000000] Node 1 MemBase 0000000120000000 Limit 0000000160000000
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
[    0.000000]   NODE_DATA [mem 0x11fffb000-0x11fffffff]
[    0.000000] Initmem setup node 1 [mem 0x120000000-0x15fffffff]
[    0.000000]   NODE_DATA [mem 0x15fff9000-0x15fffdfff]
[    0.000000] [ffffea0003f00000-ffffea0003ffffff] potential offnode page_structs
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0
[    0.000000]  [ffffea0004000000-ffffea0004dfffff] PMD -> [ffff88015e600000-ffff88015f3fffff] on node 1
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x15fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xdffa8fff]
[    0.000000]   node   0: [mem 0x100000000-0x11fffffff]
[    0.000000]   node   1: [mem 0x120000000-0x15fffffff]
[    0.000000] On node 0 totalpages: 1048391
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12487 pages used for memmap
[    0.000000]   DMA32 zone: 913321 pages, LIFO batch:31
[    0.000000]   Normal zone: 1792 pages used for memmap
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] On node 1 totalpages: 262144
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdffa9000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xffffffff]
[    0.000000] e820: [mem 0xf0000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 
[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1292595
[    0.000000] Policy zone: Normal
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xf5fa000000-0xf5fbffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
[    0.000000] Memory: 5015500K/5242140K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 226640K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1909.853 MHz processor
[    0.000161] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.70 BogoMIPS (lpj=7639412)
[    0.010955] pid_max: default: 32768 minimum: 301
[    0.015677] ACPI: Core revision 20140424
[    0.022068] ACPI: All ACPI Tables successfully acquired
[    0.027585] Security Framework initialized
[    0.031764] AppArmor: AppArmor disabled by boot time parameter
[    0.037673] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.045492] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.058817] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.068721] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.075749] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.083710] Initializing cgroup subsys memory
[    0.088191] Initializing cgroup subsys devices
[    0.092735] Initializing cgroup subsys freezer
[    0.097260] Initializing cgroup subsys net_cls
[    0.101795] Initializing cgroup subsys blkio
[    0.106161] Initializing cgroup subsys perf_event
[    0.110957] Initializing cgroup subsys net_prio
[    0.115614] tseg: 0000000000
[    0.115628] CPU: Physical Processor ID: 0
[    0.119760] CPU: Processor Core ID: 0
[    0.124568] mce: CPU supports 6 MCE banks
[    0.128687] LVT offset 0 assigned for vector 0xf9
[    0.133479] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.148958] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
[    0.158098] ftrace: allocating 21601 entries in 85 pages
[    0.173582] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.219221] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
[    0.336312] Performance Events: AMD PMU driver.
[    0.341035] ... version:                0
[    0.345112] ... bit width:              48
[    0.349288] ... generic registers:      4
[    0.353377] ... value mask:             0000ffffffffffff
[    0.358762] ... max period:             00007fffffffffff
[    0.364130] ... fixed-purpose events:   0
[    0.368218] ... event mask:             000000000000000f
[    0.376206] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.384542] x86: Booting SMP configuration:
[    0.388808] .... node  #0, CPUs:      #1 #2 #3
[    0.433426] .... node  #1, CPUs:   #4 #5 #6 #7
[    0.585100] x86: Booted up 2 nodes, 8 CPUs
[    0.589527] smpboot: Total of 8 processors activated (30558.08 BogoMIPS)
[    0.602193] devtmpfs: initialized
[    0.614218] pinctrl core: initialized pinctrl subsystem
[    0.619687] NET: Registered protocol family 16
[    0.624428] cpuidle: using governor ladder
[    0.628609] cpuidle: using governor menu
[    0.632608] node 0 link 1: io port [1000, 3fff]
[    0.632612] TOM: 00000000e0000000 aka 3584M
[    0.636871] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.636875] node 0 link 1: mmio [fc000000, fc3fffff]
[    0.636879] node 0 link 1: mmio [f8000000, fbffffff]
[    0.636881] TOM2: 0000000160000000 aka 5632M
[    0.641221] bus: [bus 00-05] on node 0 link 1
[    0.641223] bus: 00 [io  0x0000-0xffff]
[    0.641225] bus: 00 [mem 0xf0000000-0xffffffff]
[    0.641226] bus: 00 [mem 0x160000000-0xfcffffffff]
[    0.641333] ACPI: bus type PCI registered
[    0.645422] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.652104] PCI: Using configuration type 1 for base access
[    0.657755] PCI: Using configuration type 1 for extended access
[    0.664371] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.670732] mtrr: probably your BIOS does not setup all CPUs.
[    0.676554] mtrr: corrected configuration.
[    0.693213] ACPI: Added _OSI(Module Device)
[    0.697517] ACPI: Added _OSI(Processor Device)
[    0.702041] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.706824] ACPI: Added _OSI(Processor Aggregator Device)
[    0.715709] ACPI: Interpreter enabled
[    0.719457] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.728924] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[    0.738381] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[    0.747834] ACPI: (supports S0 S1 S5)
[    0.751567] ACPI: Using IOAPIC for interrupt routing
[    0.756662] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.784927] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[    0.791193] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.799510] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.836343] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.846479] PCI host bridge to bus 0000:00
[    0.850651] pci_bus 0000:00: root bus resource [bus 00-05]
[    0.856213] pci_bus 0000:00: root bus resource [io  0x0d00-0x3fff]
[    0.862470] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[    0.869428] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
[    0.876386] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.882652] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.882845] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[    0.882852] pci 0000:00:01.0: reg 0x10: [io  0x2c00-0x2c7f]
[    0.882980] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.882991] pci 0000:00:01.1: reg 0x10: [io  0x3000-0x301f]
[    0.883016] pci 0000:00:01.1: reg 0x20: [io  0x2c80-0x2cbf]
[    0.883024] pci 0000:00:01.1: reg 0x24: [io  0x2cc0-0x2cff]
[    0.883048] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.883152] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.883168] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
[    0.883194] pci 0000:00:02.0: supports D1 D2
[    0.883206] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.883251] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.889050] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.889063] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
[    0.889104] pci 0000:00:02.1: supports D1 D2
[    0.889124] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.889192] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.895004] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.895030] pci 0000:00:06.0: reg 0x20: [io  0x3020-0x302f]
[    0.895054] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.902283] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.908890] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.916114] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.922828] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.922839] pci 0000:00:07.0: reg 0x10: [io  0x3050-0x3057]
[    0.922844] pci 0000:00:07.0: reg 0x14: [io  0x3070-0x3073]
[    0.922848] pci 0000:00:07.0: reg 0x18: [io  0x3058-0x305f]
[    0.922853] pci 0000:00:07.0: reg 0x1c: [io  0x3074-0x3077]
[    0.922858] pci 0000:00:07.0: reg 0x20: [io  0x3030-0x303f]
[    0.922862] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
[    0.923032] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.923042] pci 0000:00:08.0: reg 0x10: [io  0x3060-0x3067]
[    0.923047] pci 0000:00:08.0: reg 0x14: [io  0x3078-0x307b]
[    0.923051] pci 0000:00:08.0: reg 0x18: [io  0x3068-0x306f]
[    0.923056] pci 0000:00:08.0: reg 0x1c: [io  0x307c-0x307f]
[    0.923061] pci 0000:00:08.0: reg 0x20: [io  0x3040-0x304f]
[    0.923065] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
[    0.923238] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[    0.923321] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.929124] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.929173] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.929222] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.935027] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.935082] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.935138] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.940942] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.940992] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.941042] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.946842] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.946891] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.946948] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.952763] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.952912] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.953021] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.953138] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.953279] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.953421] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[    0.953548] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[    0.953699] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[    0.953834] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[    0.953983] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[    0.954166] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[    0.954185] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.954195] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
[    0.954201] pci 0000:01:04.0: reg 0x18: [io  0x1000-0x107f]
[    0.954260] pci 0000:01:04.0: supports D1 D2
[    0.954364] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.959414] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    0.959418] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.959421] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    0.959544] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[    0.959582] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
[    0.959617] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref]
[    0.959696] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.959806] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.969943] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.975002] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.975108] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[    0.975139] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
[    0.975249] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.975344] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.985475] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.990526] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    0.990611] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.995734] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.000812] pci_bus 0000:00: on NUMA node 0
[    1.000914] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    1.007349] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    1.013782] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    1.021459] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    1.029137] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    1.036780] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[    1.044436] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    1.050851] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[    1.057287] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[    1.064934] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    1.072616] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    1.080285] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[    1.086720] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[    1.093135] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[    1.100794] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[    1.108448] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[    1.116114] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.125220] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[    1.131941] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[    1.138654] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[    1.145358] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[    1.152343] ACPI: Enabled 1 GPEs in block 00 to 1F
[    1.157612] vgaarb: setting as boot device: PCI:0000:01:04.0
[    1.163396] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[    1.171597] vgaarb: loaded
[    1.174392] vgaarb: bridge control possible 0000:01:04.0
[    1.179959] PCI: Using ACPI for IRQ routing
[    1.184242] PCI: pci_cache_line_size set to 64 bytes
[    1.184299] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.184303] e820: reserve RAM buffer [mem 0xdffa9000-0xdfffffff]
[    1.184616] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.191750] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    1.197041] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    1.205784] Switched to clocksource hpet
[    1.221333] pnp: PnP ACPI init
[    1.224560] ACPI: bus type PNP registered
[    1.229194] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.229274] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.229372] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.229451] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.229492] pnp 00:04: [dma 2]
[    1.229534] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.229556] pnp: PnP ACPI: found 5 devices
[    1.233745] ACPI: bus type PNP unregistered
[    1.245819] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window
[    1.255886] pci 0000:00:09.0: PCI bridge to [bus 01]
[    1.260931] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    1.267110] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    1.273982] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    1.281317] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
[    1.288679] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.293731] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    1.300607] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    1.305650] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    1.312520] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    1.317582] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.322636] pci_bus 0000:00: resource 4 [io  0x0d00-0x3fff]
[    1.322638] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
[    1.322641] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
[    1.322644] pci_bus 0000:00: resource 7 [io  0x0000-0x0cf7]
[    1.322647] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    1.322649] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[    1.322652] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[    1.322655] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
[    1.322658] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
[    1.322795] NET: Registered protocol family 2
[    1.327739] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.335543] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.342962] TCP: Hash tables configured (established 65536 bind 65536)
[    1.349650] TCP: reno registered
[    1.352967] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.359243] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.366107] NET: Registered protocol family 1
[    1.370959] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    1.377159] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.383151] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.388773] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.394353] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    1.400014] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.405641] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.411221] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    1.416881] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.422497] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.428073] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    1.433733] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.439352] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.444933] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    1.450594] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.456196] pci 0000:01:04.0: Video device with shadowed ROM
[    1.456205] PCI: CLS 64 bytes, default 64
[    1.456313] Unpacking initramfs...
[    1.689437] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
[    1.697426] PCI-DMA: Disabling AGP.
[    1.702626] PCI-DMA: aperture base @ d4000000 size 65536 KB
[    1.708292] PCI-DMA: using GART IOMMU.
[    1.712129] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.724252] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.732601] microcode: CPU0: patch_level=0x01000096
[    1.737596] microcode: CPU1: patch_level=0x01000096
[    1.742606] microcode: CPU2: patch_level=0x01000096
[    1.747610] microcode: CPU3: patch_level=0x01000096
[    1.752624] microcode: CPU4: patch_level=0x01000096
[    1.757615] microcode: CPU5: patch_level=0x01000096
[    1.762610] microcode: CPU6: patch_level=0x01000096
[    1.768710] microcode: CPU7: patch_level=0x01000096
[    1.773794] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.782736] LVT offset 1 assigned for vector 0x400
[    1.787653] IBS: LVT offset 1 assigned
[    1.791522] perf: AMD IBS detected (0x00000007)
[    1.796754] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.803253] audit: initializing netlink subsys (disabled)
[    1.808776] audit: type=2000 audit(1428977651.616:1): initialized
[    1.815690] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.822196] zbud: loaded
[    1.825153] VFS: Disk quotas dquot_6.5.2
[    1.829216] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.835856] msgmni has been set to 9941
[    1.840315] alg: No test for stdrng (krng)
[    1.844611] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.852260] io scheduler noop registered
[    1.856297] io scheduler deadline registered
[    1.860731] io scheduler cfq registered (default)
[    1.865737] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[    1.865864] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[    1.865988] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[    1.866114] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[    1.866275] aer 0000:00:0b.0:pcie02: service driver aer loaded
[    1.866303] aer 0000:00:0c.0:pcie02: service driver aer loaded
[    1.866329] aer 0000:00:0d.0:pcie02: service driver aer loaded
[    1.866355] aer 0000:00:0e.0:pcie02: service driver aer loaded
[    1.866375] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    1.873470] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.880109] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    1.880119] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    1.887161] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.893769] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    1.893780] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[    1.900823] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[    1.900835] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[    1.907875] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[    1.907908] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.913588] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.920423] GHES: HEST is not enabled!
[    1.924388] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.951185] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.978969] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.987019] Linux agpgart interface v0.103
[    1.991434] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[    2.001866] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.006964] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.012291] mousedev: PS/2 mouse device common for all mice
[    2.018070] rtc_cmos rtc_cmos: RTC can wake from S4
[    2.023279] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    2.029781] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    2.037765] ledtrig-cpu: registered to indicate activity on CPUs
[    2.044031] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.050568] AMD IOMMUv2 functionality not available on this system
[    2.056967] TCP: cubic registered
[    2.060521] NET: Registered protocol family 10
[    2.065483] mip6: Mobile IPv6
[    2.068555] NET: Registered protocol family 17
[    2.073166] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.081943] mpls_gso: MPLS GSO support
[    2.086647] registered taskstats version 1
[    2.091589] rtc_cmos rtc_cmos: setting system clock to 2015-04-14 02:14:13 UTC (1428977653)
[    2.100175] PM: Hibernation image not present or could not be loaded.
[    2.102013] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
[    2.110021] Write protecting the kernel read-only data: 8192k
[    2.119341] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
[    2.128085] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    2.148265] systemd-udevd[99]: starting version 215
[    2.153820] random: systemd-udevd urandom read with 3 bits of entropy available
[    2.176955] pps_core: LinuxPPS API ver. 1 registered
[    2.177014] ACPI: bus type USB registered
[    2.177070] usbcore: registered new interface driver usbfs
[    2.177091] usbcore: registered new interface driver hub
[    2.177253] usbcore: registered new device driver usb
[    2.202229] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.211803] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.218759] PTP clock support registered
[    2.223074] ehci-pci: EHCI PCI platform driver
[    2.227884] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.228006] ehci-pci 0000:00:02.1: EHCI Host Controller
[    2.228020] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    2.228040] ehci-pci 0000:00:02.1: debug port 1
[    2.228086] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    2.228115] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
[    2.237460] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.237555] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.237557] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.237558] usb usb1: Product: EHCI Host Controller
[    2.237560] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.237561] usb usb1: SerialNumber: 0000:00:02.1
[    2.237900] hub 1-0:1.0: USB hub found
[    2.237910] hub 1-0:1.0: 10 ports detected
[    2.301564] tg3.c:v3.137 (May 11, 2014)
[    2.305554] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[    2.311454] ohci-pci: OHCI PCI platform driver
[    2.311571] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[    2.322050] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    2.327749] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.335317] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
[    2.384643] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[    2.395054] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.395474] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.395477] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.395478] usb usb2: Product: OHCI PCI host controller
[    2.395480] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.395481] usb usb2: SerialNumber: 0000:00:02.0
[    2.395713] hub 2-0:1.0: USB hub found
[    2.395724] hub 2-0:1.0: 10 ports detected
[    2.443192] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.451144] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.458056] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[    2.464025] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[    2.521867] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[    2.532308] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.542183] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.550165] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.563375] FS-Cache: Loaded
[    2.570528] RPC: Registered named UNIX socket transport module.
[    2.577232] RPC: Registered udp transport module.
[    2.583292] RPC: Registered tcp transport module.
[    2.589417] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.601917] FS-Cache: Netfs 'nfs' registered for caching
[    2.615605] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[    2.661403] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    2.721274] tsc: Refined TSC clocksource calibration: 1909.786 MHz
[    3.725019] Switched to clocksource tsc
[    4.253782] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
[    4.260467] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[    4.267461] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    6.545048] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    6.559206] systemd[1]: Detected architecture 'x86-64'.
[    6.946898] random: nonblocking pool is initialized
[    6.969954] systemd[1]: Inserted module 'autofs4'
[    6.976821] systemd[1]: Set hostname to <cb-test-tgt>.
[    7.305216] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[    7.318114] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    7.333493] systemd[1]: Expecting device dev-ttyS0.device...
[    7.347728] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    7.355616] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.363334] systemd[1]: Starting Remote File Systems (Pre).
[    7.379791] systemd[1]: Reached target Remote File Systems (Pre).
[    7.386152] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    7.407769] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.417424] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    7.425692] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    7.433752] systemd[1]: Starting Paths.
[    7.447679] systemd[1]: Reached target Paths.
[    7.452144] systemd[1]: Starting Encrypted Volumes.
[    7.467678] systemd[1]: Reached target Encrypted Volumes.
[    7.473215] systemd[1]: Starting Swap.
[    7.487663] systemd[1]: Reached target Swap.
[    7.492062] systemd[1]: Starting Root Slice.
[    7.515651] systemd[1]: Created slice Root Slice.
[    7.520595] systemd[1]: Starting User and Session Slice.
[    7.535640] systemd[1]: Created slice User and Session Slice.
[    7.541504] systemd[1]: Starting Delayed Shutdown Socket.
[    7.555682] systemd[1]: Listening on Delayed Shutdown Socket.
[    7.561605] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    7.579669] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.586796] systemd[1]: Starting Journal Socket (/dev/log).
[    7.603642] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.609679] systemd[1]: Starting Syslog Socket.
[    7.623630] systemd[1]: Listening on Syslog Socket.
[    7.629754] systemd[1]: Starting udev Kernel Socket.
[    7.643609] systemd[1]: Listening on udev Kernel Socket.
[    7.649063] systemd[1]: Starting udev Control Socket.
[    7.663592] systemd[1]: Listening on udev Control Socket.
[    7.669142] systemd[1]: Starting Journal Socket.
[    7.683594] systemd[1]: Listening on Journal Socket.
[    7.688753] systemd[1]: Starting Sockets.
[    7.703583] systemd[1]: Reached target Sockets.
[    7.708261] systemd[1]: Starting System Slice.
[    7.723581] systemd[1]: Created slice System Slice.
[    7.728605] systemd[1]: Starting system-getty.slice.
[    7.743585] systemd[1]: Created slice system-getty.slice.
[    7.749100] systemd[1]: Starting system-serial\x2dgetty.slice.
[    7.763573] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    7.771582] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.796758] systemd[1]: Mounting Debug File System...
[    7.820700] systemd[1]: Started Set Up Additional Binary Formats.
[    7.826988] systemd[1]: Mounting Huge Pages File System...
[    7.871444] systemd[1]: Starting Load Kernel Modules...
[    7.888433] systemd[1]: Mounting POSIX Message Queue File System...
[    7.904493] systemd[1]: Starting udev Coldplug all Devices...
[    7.921543] systemd[1]: Starting Journal Service...
[    7.947594] systemd[1]: Started Journal Service.
[    8.393568] systemd-udevd[190]: starting version 215
[    8.662755] systemd-journald[168]: Received request to flush runtime journal from PID 1
[    9.277987] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[    9.286209] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[    9.303024] EDAC MC: Ver: 3.0.0
[    9.459016] w83793 0-002f: Registered watchdog chardev major 10, minor: 130
[    9.466120] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[    9.526136] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    9.534950] ACPI: Power Button [PWRB]
[    9.540262] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    9.540360] SCSI subsystem initialized
[    9.540432] MCE: In-kernel MCE decoding enabled.
[    9.543610] FDC 0 is a post-1991 82077
[    9.564002] ACPI: Power Button [PWRF]
[    9.568957] acpi-cpufreq: overriding BIOS provided _PSD data
[    9.580741] AMD64 EDAC driver v3.4.0
[    9.615272] libata version 3.00 loaded.
[    9.636785] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    9.733404] kvm: Nested Virtualization enabled
[    9.738071] kvm: Nested Paging enabled
[   12.721818] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[   12.727410] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.734404] EDAC amd64: DRAM ECC enabled.
[   12.738594] EDAC amd64: F10h detected (node 0).
[   12.743455] EDAC MC: DCT0 chip selects:
[   12.743459] EDAC amd64: MC: 0:     0MB 1:     0MB
[   12.748248] EDAC amd64: MC: 2:     0MB 3:     0MB
[   12.753031] EDAC amd64: MC: 4:     0MB 5:     0MB
[   12.757824] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   12.762596] EDAC MC: DCT1 chip selects:
[   12.762599] EDAC amd64: MC: 0:     0MB 1:     0MB
[   12.767404] EDAC amd64: MC: 2:     0MB 3:     0MB
[   12.772194] EDAC amd64: MC: 4:     0MB 5:     0MB
[   12.776995] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   12.781794] EDAC amd64: using x4 syndromes.
[   12.786085] EDAC amd64: MCT channel count: 2
[   12.790504] EDAC amd64: CS6: Registered DDR2 RAM
[   12.795217] EDAC amd64: CS7: Registered DDR2 RAM
[   12.800349] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[   12.810249] EDAC amd64: DRAM ECC enabled.
[   12.814453] EDAC amd64: F10h detected (node 1).
[   12.819116] EDAC MC: DCT0 chip selects:
[   12.819119] EDAC amd64: MC: 0:  1024MB 1:     0MB
[   12.823918] EDAC amd64: MC: 2:     0MB 3:     0MB
[   12.828708] EDAC amd64: MC: 4:     0MB 5:     0MB
[   12.833497] EDAC amd64: MC: 6:     0MB 7:     0MB
[   12.838299] EDAC MC: DCT1 chip selects:
[   12.838304] EDAC amd64: MC: 0:     0MB 1:     0MB
[   12.843098] EDAC amd64: MC: 2:     0MB 3:     0MB
[   12.847888] EDAC amd64: MC: 4:     0MB 5:     0MB
[   12.852682] EDAC amd64: MC: 6:     0MB 7:     0MB
[   12.857471] EDAC amd64: using x4 syndromes.
[   12.861744] EDAC amd64: MCT channel count: 1
[   12.866182] EDAC amd64: CS0: Registered DDR2 RAM
[   12.871202] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
[   12.881108] sata_nv 0000:00:07.0: version 3.5
[   12.881127] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[   12.881471] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[   12.882256] scsi0 : sata_nv
[   12.901173] scsi1 : sata_nv
[   12.904250] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[   12.911529] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[   12.919139] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[   12.925502] scsi2 : sata_nv
[   12.928574] scsi3 : sata_nv
[   12.931548] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[   12.938803] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[   12.946104] pata_amd 0000:00:06.0: version 0.4.1
[   12.947041] scsi4 : pata_amd
[   12.950363] scsi5 : pata_amd
[   12.953557] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[   12.960621] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[   13.229642] ata1: SATA link down (SStatus 0 SControl 300)
[   13.257639] ata3: SATA link down (SStatus 0 SControl 300)
[   13.545533] ata2: SATA link down (SStatus 0 SControl 300)
[   13.861421] ata4: SATA link down (SStatus 0 SControl 300)
[   40.876945] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****